magni telescopic handlers srl hth25 - liftking · magni telescopic handlers srl ... hydraulic...
TRANSCRIPT
Magni Telescopic Handlers srlVia Magellano, 22 - 41013 Castelfranco Emilia, Modena, Italia
Tel: +39 059 8630811 - Fax: +39 059 [email protected] - www.magnith.com HTH25.11
HTH
25.11
LIFT CAPACITY 24.999 Kg at 900 mm load center
MAXIMUM LIFTING HEIGHT 10,85 m
MAXIMUM REACH 6,29 m
FORKSFork carriage with forks positioner 2.400 mm lengthForks 250x110x2.400 mm
CAB
FOPS-ROPS tested hermetic cab with protectorsFront, rear and upper wiperHeadlights for road circulation, fl ashing beaconRear view mirrorsHeating - Air conditioning
CONTROLS Multi-function electro proportional joystick
BRAKE SYSTEMHydraulic servo-assisted multidisc brake in oil bath on both axles, with double circuitNegative parking brake
ENGINE
Mercedes OM 924.C72 LA Euro 4 InterimTurbo intercooler4 cylinders / 4.800 cm 3 Power 150 KWMax rpm = 2.200Max torque 800 Nm at 1.400 rpmElectronic injection (single pump each injector)Liquid cooling system
AXLES
Heavy Duty with 2-stage epicyclic reductionOne steering cylinders each axleLevelling correction front axle at + 5° on the right and + 5° on the left3 types of steering: - with front steering - with round steer - with crab steeringTilting rear axle
PERFORMACE
Max. travel speed: 25 km/hDrawbar pull: 18,355 kgGradeability: 30%Turning radius (end of forks): 9.150 mm
WEIGHTSTotal unladen: 32.500 kgFront axle unladen (boom retracted and lowered): 12.900 kgRear axle unladen (boom retracted and lowered): 19.600 kg
TRANSMISSION
Rexroth hydrostaticsVariable displacement hydrostatic pump 110 cc with electronic controlOne variable displacement hydrostatic motorsHydraulic gearbox with 2 speeds forward / reverseDisconnection of rear axle
HYDRAULIC CIRCUIT
Load sensing piston pump 75 cc 165 l/minCircuit at 350 barRexroth Proportional hydraulic distributorSuction and return line fi ltersHigh pressure fl exible hoses
TANKS CAPACITIES
Engine oil = 16 lColling liquid = 25 lHydraulic oil tank = 300 lFuel tank = 300 l
TYRES DIMENSIONS 26,5 - R25 ** two each axle, driving and steering
SAFETYElectronic safety system which controls the load with defi nition of the lifted load, radius and comparison with the diagrams stored.Block of aggravating movements of the load.Safety valves on cylinders
• Maximum lift capacity: 25 t at 900 mm load center• Maximum lifting height: 10,85 m• Maximum reach: 6,29 m• Mercedes engine: 150 KW
The data in this brochure are informative and subject to change without notice
55,113 lbs at 35.4 in load center
35.6 ft20.6 ftFork carriage with forks positioner 94.5 in lengthForks 9.8x4.3x94.5 in
4 cylinders / 292.9 in 3
Power 201 HP
Max torque 590 ft lbs at 1.400 rpm
Max. travel speed: 15.5 mphDrawbar pull: 180 kN
Turning radius (end of forks): 360.2 inTotal unladen: 71,650 lbsFront axle unladen (boom retracted and lowered): 28,440 lbsRear axle unladen (boom retracted and lowered): 43,211 lbs
Variable displacement hydrostatic pump 6.7cu in with electronic control
Load sensing piston pump 4.6 cu in 43.6 gal/minCircuit at 5076 psi
Engine oil = 4.2 galColling liquid = 6.6 galHydraulic oil tank = 79.3 galFuel tank = 79.3 gal
• Maximum lift capacity: 55,113 lbs at 35.4 in load center• Maximum lifting height: 35.6 ft• Maximum reach: 20.6 ft• Mercedes engine: 201 HP
• Electronically controlled hydrostatic transmission
HTH25.11
3432
/ 13
5.1
R8225
/323
.8
1712 / 67.42298 / 90.5
5°
5°
2920 / 115
4500 / 177.21332/52.47544 / 2972400 / 94.5
11°
403 / 15.9
spos
tam
ento
late
r. id
raul
ico
forc
he
Live
llam
ento
ass
e an
t.
Load chart forkcarriage with forks positioner Load chart with tyres handler
From the left:
• Travelling mode screen
• Load Moment Indicator screen
• Air conditioning management screen
Pressurized cab ISO 10.263
Standard air conditioning and heating
Touch screen display with joystick control system
• MAGNI patented quick fi t of the attachment
• Attachments automatic recognition RFID system
Tyres handler, with a capacity up to 16.000 kg (35,274 lbs) from 24 to 63 inches .
Full visibility cabMAGNI patented design
ft3.3 06.69.813.116.419.723.0
3.3
0
6.6
9.8
13.1
16.4
19.7
22.9
26.2
29.5
32.8
36.1
39.4
ft
3.3
0
6.6
9.8
13.1
16.4
19.7
22.9
26.2
29.5
32.8
36.1
39.4
ft m
ft3.3 06.69.813.116.419.722.926.229.532.8
ft3.3 06.69.813.116.419.722.926.229.532.8
3000
/ 6,
614
[kg/lbs]
3500
/ 7,
716
4250
/ 9,
370
5500
/12,
125
6250
/ 13
,779
8000
/ 17
,637
9000
/ 19
,842
1000
0 / 2
2,04
6 12
000
26,4
55
[kg/lbs]
11,33 m37.17 ft
3258mm/128.3”
6500
/ 14
,330
7500
/ 16
,535
9000
/ 19
,842
1100
0 / 2
4,25
1
1450
0 / 3
1,96
717
000
/ 37,
478
2000
0 / 4
4,09
2 2499
955
,113
10,85 m35.60 ft
900mm/35.4”
1255mm/49.4”
[mm / in]
HTH25.11
3432
/ 13
5.1
R8225
/323
.8
1712 / 67.42298 / 90.5
5°
5°
2920 / 115
4500 / 177.21332/52.47544 / 2972400 / 94.5
11°
403 / 15.9
spos
tam
ento
late
r. id
raul
ico
forc
he
Live
llam
ento
ass
e an
t.
Load chart forkcarriage with forks positioner Load chart with tyres handler
From the left:
• Travelling mode screen
• Load Moment Indicator screen
• Air conditioning management screen
Pressurized cab ISO 10.263
Standard air conditioning and heating
Touch screen display with joystick control system
• MAGNI patented quick fi t of the attachment
• Attachments automatic recognition RFID system
Tyres handler, with a capacity up to 16.000 kg (35,274 lbs) from 24 to 63 inches .
Full visibility cabMAGNI patented design
ft3.3 06.69.813.116.419.723.0
3.3
0
6.6
9.8
13.1
16.4
19.7
22.9
26.2
29.5
32.8
36.1
39.4
ft
3.3
0
6.6
9.8
13.1
16.4
19.7
22.9
26.2
29.5
32.8
36.1
39.4
ft m
ft3.3 06.69.813.116.419.722.926.229.532.8
ft3.3 06.69.813.116.419.722.926.229.532.8
3000
/ 6,
614
[kg/lbs]35
00 /
7,71
6 42
50 /
9,37
0 55
00 /1
2,12
562
50 /
13,7
79
8000
/ 17
,637
9000
/ 19
,842
1000
0 / 2
2,04
6 12
000
26,4
55
[kg/lbs]
11,33 m37.17 ft
3258mm/128.3”
6500
/ 14
,330
7500
/ 16
,535
9000
/ 19
,842
1100
0 / 2
4,25
1
1450
0 / 3
1,96
717
000
/ 37,
478
2000
0 / 4
4,09
2 2499
955
,113
10,85 m35.60 ft
900mm/35.4”
1255mm/49.4”
[mm / in]
Magni Telescopic Handlers srlVia Magellano, 22 - 41013 Castelfranco Emilia, Modena, Italia
Tel: +39 059 8630811 - Fax: +39 059 [email protected] - www.magnith.com HTH25.11
HTH
25.11
LIFT CAPACITY 24.999 Kg at 900 mm load center
MAXIMUM LIFTING HEIGHT 10,85 m
MAXIMUM REACH 6,29 m
FORKSFork carriage with forks positioner 2.400 mm lengthForks 250x110x2.400 mm
CAB
FOPS-ROPS tested hermetic cab with protectorsFront, rear and upper wiperHeadlights for road circulation, fl ashing beaconRear view mirrorsHeating - Air conditioning
CONTROLS Multi-function electro proportional joystick
BRAKE SYSTEMHydraulic servo-assisted multidisc brake in oil bath on both axles, with double circuitNegative parking brake
ENGINE
Mercedes OM 924.C72 LA Euro 4 InterimTurbo intercooler4 cylinders / 4.800 cm 3 Power 150 KWMax rpm = 2.200Max torque 800 Nm at 1.400 rpmElectronic injection (single pump each injector)Liquid cooling system
AXLES
Heavy Duty with 2-stage epicyclic reductionOne steering cylinders each axleLevelling correction front axle at + 5° on the right and + 5° on the left3 types of steering: - with front steering - with round steer - with crab steeringTilting rear axle
PERFORMACE
Max. travel speed: 25 km/hDrawbar pull: 18,355 kgGradeability: 30%Turning radius (end of forks): 9.150 mm
WEIGHTSTotal unladen: 32.500 kgFront axle unladen (boom retracted and lowered): 12.900 kgRear axle unladen (boom retracted and lowered): 19.600 kg
TRANSMISSION
Rexroth hydrostaticsVariable displacement hydrostatic pump 110 cc with electronic controlOne variable displacement hydrostatic motorsHydraulic gearbox with 2 speeds forward / reverseDisconnection of rear axle
HYDRAULIC CIRCUIT
Load sensing piston pump 75 cc 165 l/minCircuit at 350 barRexroth Proportional hydraulic distributorSuction and return line fi ltersHigh pressure fl exible hoses
TANKS CAPACITIES
Engine oil = 16 lColling liquid = 25 lHydraulic oil tank = 300 lFuel tank = 300 l
TYRES DIMENSIONS 26,5 - R25 ** two each axle, driving and steering
SAFETYElectronic safety system which controls the load with defi nition of the lifted load, radius and comparison with the diagrams stored.Block of aggravating movements of the load.Safety valves on cylinders
• Maximum lift capacity: 25 t at 900 mm load center• Maximum lifting height: 10,85 m• Maximum reach: 6,29 m• Mercedes engine: 150 KW
The data in this brochure are informative and subject to change without notice
55,113 lbs at 35.4 in load center
35.6 ft20.6 ftFork carriage with forks positioner 94.5 in lengthForks 9.8x4.3x94.5 in
4 cylinders / 292.9 in 3
Power 201 HP
Max torque 590 ft lbs at 1.400 rpm
Max. travel speed: 15.5 mphDrawbar pull: 180 kN
Turning radius (end of forks): 360.2 inTotal unladen: 71,650 lbsFront axle unladen (boom retracted and lowered): 28,440 lbsRear axle unladen (boom retracted and lowered): 43,211 lbs
Variable displacement hydrostatic pump 6.7cu in with electronic control
Load sensing piston pump 4.6 cu in 43.6 gal/minCircuit at 5076 psi
Engine oil = 4.2 galColling liquid = 6.6 galHydraulic oil tank = 79.3 galFuel tank = 79.3 gal
• Maximum lift capacity: 55,113 lbs at 35.4 in load center• Maximum lifting height: 35.6 ft• Maximum reach: 20.6 ft• Mercedes engine: 201 HP
• Electronically controlled hydrostatic transmission