magneti marelli battery tester bt002 en
TRANSCRIPT
![Page 1: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/1.jpg)
Digital Battery / Charging / Starting
System Analyzer BT002 MM
007950007110
![Page 2: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/2.jpg)
2
Why battery testers are needed?
To evaluate the battery condition:
To avoid the circumstance not able to start your
vehicle
To support battery warranty programs
- It becomes more and more commonly viewed as a
standard check item in car service centers.
To increase battery sales.
- Preventative maintenance
- Warranty management
- Aftermarket service
![Page 3: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/3.jpg)
3
The Opportunity
Make it an investment!
- Fast retrieve of the cost
- Double your battery and electrical business just by
making a simple, minutes test part of your daily
inspection routine
- Sales & Profit
![Page 4: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/4.jpg)
4
Why DHC battery testers?(1/3) - DHC Patented Technology
DHC Single Load, Dynamic Resistance Technology:
Applies heavy load to the tested battery with a
transient discharging current up to 100Amp.
- Similar to real behavior of the starting battery in the
vehicle.
- Similar to the recommended way (load test) of
judging a battery that stated in BCI’s “BATTERY
SERVICE MANUAL”.
Minimizes battery drain during test
- Never fooled by conditions such as surface charge,
parasitic drain & contact impedance.
Improves daily garage service efficiency
- Good in-vehicle test technology
![Page 5: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/5.jpg)
5
Why DHC battery testers?(2/3)
- Features of DHC digital battery testers
Easy to use interface
No heat problem
Available to perform serial tests
Test multiple lead acid battery builds including AGM
flat plate & AGM spiral
Test both charged & discharged batteries down to 1.5
V.
Test based on SAE, DIN, EN, IEC & JIS international
battery industry ratings
Fast diagnosis: In 2 seconds, DHC testers show
recommended actions
![Page 6: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/6.jpg)
6
Why DHC battery testers?(3/3)
DHC Competitor M
Technology
Single Load, dynamic resistance
technology
(SLDR)
Conductance technology
Test scheme
Conclusion
DHC's technology reflects the true
condition of the tested battery (the load
test method is stated in BCI's service
manual) and gets a more accurate in-
vehicle test result.
Competitor M analyzes the tested
battery condition with a probing small
signal, which may be affected by
some in-vehicle electronic devices,
especially when the car just reaches
the garage, in the case that the
surface charge may blind the tester.
![Page 7: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/7.jpg)
7
Product Introduction
BT002
![Page 8: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/8.jpg)
Digital Battery / Charging / Starting System Analyzer
8
Model Number BT002
Application 6V & 12V Battery / 12V & 24V Charging/Starting System
Voltmeter 1.5V ~ 30V
Operating Range 40 ~ 2,000 CCA (SAE)
Dimensions (mm) L190 x W115 x H50
![Page 9: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/9.jpg)
9
BT002 Features Highlight
LCD display
Directional keys
Boot
![Page 10: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/10.jpg)
BT002 Features (1/2)
ACCURATE
Patented Single Load, Dynamic Resistance Technology
• To deliver the most accurate in-vehicle test result
• Never be fooled by conditions such as surface charge,
parasitic drain and contact impedance
Safe & Reliable
Multiple Protection Design • Over temperature/ Over Current/ Over Voltage protection
• Reverse poles protection
• Short clamp protection
10
![Page 11: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/11.jpg)
11
BT002 Features (2/2)
FAST & EASY USE
“SPEED CHECK”: Easy-to-Read Intuitive Interface
• To increase test throughput in high volume shop.
Back-Lit Display
• LCD display
• 2 lines 16 characters
![Page 12: Magneti Marelli Battery Tester BT002 EN](https://reader034.vdocuments.us/reader034/viewer/2022050618/58ed94c81a28ab717c8b4767/html5/thumbnails/12.jpg)
12
Dealer: Magneti Marelli Macedonia
e-mail: [email protected]
Tel. +38970242289
www.facebook.com/MagnetiMarelliMacedonia
Thank you for being with us.
MM 007950007110
BT002