magnet drive gear pumps mk200/mk300 series · find out more the mk200 and mk300 series pumps are...
TRANSCRIPT
www.fluidotech.com
Find out more
The MK200 and MK300 series pumps are designed to complete the existing MG series with improved performances in terms of capability to handle high viscosity fluids and a wider offer of materials to suit most applications, from the food to the industrial and chemical markets. The pump’s housing and the internal metal parts are available in AISI 303, AISI 316L or SAF 2205. The gears are available in Peek™, Ceramic Peek™ or PTFE™.The driving magnet and the quality of the materials of the assembled components allows handling of fluids with temperatures up to 120 °C (248 F). The low noise and pulsation is the result of precision gears accurately assembled and balanced within the housing combined with the magnetic coupling wich grants the perfect alignment. The Sanitary design makes this pump series the preferred candidate for use in medical applications where trouble-free products are needed.Available upon request:• Built-in relief valve (MK200 series only) • Medical and surgical equipment
• Hemodialysis apparatus
• Laser apparatus
• Lubrication
• Ink-Jet printing systems
• Cooling systems
• Laboratory instrumentation
• Water treatment
• Sampling
• Food processing equipment
MAIN APPLICATIONS
Magnet drive gear pumps MK200/MK300 series
66.4-80.83 [2.6141-3.1822] Ø 80 [Ø 3.1495]
45.7-60.13 [1.7992-2.3673] 18.3 [0.7204]
1.2 [0.0472]
2x1/4” NPT2x1/4” GAS
13.7 [0.5393]
Ø40
[Ø 1
.574
7]
Ø32
[Ø 1
.259
8]
Ø45
.2 [Ø
1.7
795]5.
16 [0
.203
1]
Ø 73 [Ø 2.8740]
Ø 66 ± 0.05[Ø 2.5984 ± 0.0019]
6x Ø 3.5[Ø 0.1377] [Ø 0.1377]
6x Ø 3.5
Ø 73 [Ø 2.8740]
65.3-78.58 [2.5708-3.0936]
48-60.28 [1.8897-2.3732] 18.3 [0.7204]
1.2 [0.0472]
2x1/4” NPT2x1/4” GAS
13.7 [0.5393]
Ø40
[Ø 1
.574
7]
Ø45
.2 [Ø
1.7
795]
Ø 66 ± 0.05[Ø 2.5984 ± 0.0019]
Ø 80 [Ø 3.1495]
5.16
[0.2
031]
Pump fixing Pump fixing
Pump centering Pump centering
* Priming ability varies with operating conditions and fluid characteristics
TECHNICAL INFORMATION
Pump housing material Stainless steel
Gears and bushing materials
Ports 1/4” GAS or NPT
Pump weight (MK313) 700 g (1.5 lb)
Speed limit 5.000 rpm
Max static pressure 20 bar/290 psi
Peek™ -45 to 120 °C/-49 to 248 F
PTFE™ -45 to 50 °C/-49 to 122 F
Ceramic Peek™ -45 to 120 °C/-49 to 248 F
724 mmHg/28.5 inHg
~ 8m/26.7 ft
Max vacuum
*Wet lift with water
Temperature range
Peek™/Ceramic Peek™/PTFE™
Dimensions in mm [inches]
l/h MK209-309 @ 2900 rpmGPH
40
36
32
28
24
20
16
12
8
4
0bar
160
140
120
100
80
60
40
20
00 2018161412108642
psi0 29025020015010050
l/h MK209-309 @ 1450 rpmGPH
20
18
16
14
12
10
8
6
4
2
0bar
80
70
60
50
40
30
20
10
00 2018161412108642
psi0 29025020015010050
l/h MK209-309 @ 1725 rpmGPH
20
18
16
14
12
10
8
6
4
2
0bar
80
70
60
50
40
30
20
10
00 2018161412108642
psi0 29025020015010050
D
C
B
A
D
C
B
A
C
B
A
A = 1 cSt B = 20 cSt C = 75 cSt D = 180 cSt E = 210 cSt
l/h MK209-309 @ 3450 rpmGPH
40
36
32
28
24
20
16
12
8
4
0bar
160
140
120
100
80
60
40
20
00 2018161412108642
psi0 29025020015010050
C
B
A
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Operating range with ferrite magnetOperating range with rare earth magnet
l/h MK213-313 @ 2900 rpmGPH
52
48
44
40
36
32
28
24
20
16
12
bar
200
180
160
140
120
100
80
60
400 2018161412108642
psi0 29025020015010050
l/h MK213-313 @ 1450 rpmGPH
40
36
32
28
24
20
16
12
8
4
0bar
160
140
120
100
80
60
40
20
00 2018161412108642
psi0 29025020015010050
l/h MK213-313 @ 1725 rpmGPH
40
36
32
28
24
20
16
12
8
4
0bar
160
140
120
100
80
60
40
20
00 2018161412108642
psi0 29025020015010050
C
B
A
C
B
A
B
A
A = 1 cSt B = 20 cSt C = 75 cSt D = 180 cSt E = 210 cSt
l/h MK213-313 @ 3450 rpmGPH
60
56
52
48
44
40
36
32
28
24
bar
240
220
200
180
160
140
120
100
800 2018161412108642
psi0 29025020015010050
B
A
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
www.fluidotech.com
l/h MK217-317 @ 2900 rpmGPH
68
64
60
56
52
48
44
40
36
32
28
bar
260
240
220
200
180
160
140
120
1000 2018161412108642
psi0 29025020015010050
B
A
A = 1 cSt B = 20 cSt C = 75 cSt D = 180 cSt E = 210 cSt
l/h MK217-317 @ 1450 rpmGPH
52
48
44
40
36
32
28
24
20
16
12
bar
200
180
160
140
120
100
80
60
400 2018161412108642
psi0 29025020015010050
CB
A
l/h MK217-317 @ 3450 rpmGPH
76
72
68
64
60
56
52
48
44
40bar
300
280
260
240
220
200
180
160
1400 2018161412108642
psi0 29025020015010050
B
A
l/h MK217-317 @ 1725 rpmGPH
52
48
44
40
36
32
28
24
20
16
12
bar
200
180
160
140
120
100
80
60
400 2018161412108642
psi0 29025020015010050
B
C
A
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Magnet drive gear pumps MK200/MK300 series
Operating range with ferrite magnetOperating range with rare earth magnet
l/h MK213-313 H.V. @ 1725 rpmGPH
bar
120
115
110
105
100
95
90
85
800 1413121110876 954321
psi20016012080400
C = 75 cSt D = 180 cSt E = 210 cSt
E
D
30
28
26
24
22
l/h MK213-313 H.V. @ 3450 rpmGPH
bar
220
215
205
200
195
190
185
180
0 1413121110876 954321
psi20016012080400
58
56
54
52
50
48
l/h MK213-313 H.V. @ 2900 rpmGPH
bar
180
175
170
165
160
155
150
145
1400 1413121110876 954321
psi20016012080400
46
44
42
40
38
E
D
C
E
D
C
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
MK213/313 H.V.
Note: The inlet pipe diameter must be at least 10 mm. For applications involving fluids different from water, high temperatures or unusual processing conditions, please consult the factory
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
MK200-MK300 en - 06/13 Ed.
psi0
C = 75 cSt D = 180 cSt E = 210 cSt
l/h MK317 H.V. @ 1450 rpmGPH
36
34
32
30
28
bar
140
135
130
125
120
115
110
105
1000 10987654321
psi0 1401006020
0
E
C
D
l/h MK317 H.V. @ 1725 rpmGPH
bar
160
155
150
145
140
135
130
125
1200 10987654321
psi0 1401006020
ED
42
40
38
36
34
32
l/h MK317 H.V. @ 2900 RPMGPH
bar
260
255
250
245
240
235
230
225
2200 10987654321
1401006020
EC
D
l/h MK317 H.V. @ 3450 rpmGPH
bar
300
295
290
285
280
275
270
265
2600 10987654321
psi1401006020
ED C
78
76
74
72
70
78
76
74
72
70
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
MK217/317 H.V.
Note: The inlet pipe diameter must be at least 10 mm. For applications involving fluids different from water, high temperatures or unusual processing conditions, please consult the factory or an authorized distributor.
Position 1 2 3 4 5 6 7 8 Customization
Code MK 3 13 X E 0 P N 00000
12
3
56
7
8
POS POSDESCRIPTION
Driven magnetPump series
Gear width in mm(Nominal displacement)
CODE
MK = ferrite 2 = PTFE™ flat seal 3 = with o-ring
13 = 13 mm (0.9 ml/rev)09 = 9 mm (0.6 ml/rev)
17 = 17 mm (1.2 ml/rev)
Housing material
DESCRIPTION
Type of connectionsRelief valve
Gear material
Static seal material
CODE
X = AISI 316L S = SAF 2205Y = AISI 303
E = 1/4” GAS F = 1/4” NPT0 = without 1 = withP = Peek™ T = PTFE™
4
G = Ceramic Peek™
T = PTFE™ E = EPDM
N = NBR S = Silicon V = Viton®
MODEL NUMBER MATRIX
Fluid-o-Tech Int’l Inc.161 Atwater St.,
06479 Plantsville CT (USA)Tel. +1 (860) 276 9270Fax +1 (860) 620 [email protected]
Fluid-o-Tech Int’l Inc. Japan203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, JapanTel. +81 (0) (3) 3783 9660Fax +81 (0) (3) 3783 9661
Fluid-o-Tech Asia (Beijing) Co., Ltd Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRCTel. +86 (0) (10) 6168 4650Fax +86 (0) (10) 6168 4651 [email protected]
Fluid-o-Tech srl Via Leonardo da Vinci, 40
20094 Corsico, Milano, ItalyTel. +39 02 9995 01
Fax +39 02 9995 [email protected]