magnatech led t8 tube exalite quality report

report eXalite

1 www.magnatechled.com|[email protected]|engineering department

Engineering

We often hear about quality standards, manufacturing process and materials

used in the eXalite tube. This document will show just how the eXalite is

holding its reputation of being simply the best tube in the LED market.

As a brief comparison to what the competitors are offering in opposite of

what a high-end-but-cost-effective-product is made of.

Starting from the beginning, the eXalite is made of high end

materials to ensure an extended lifetime and optimum fidelity

and efficiency. Basically 4 parts are to be considered, all playing

an important role.

- Driver

- PCB

- Chip

- Casing

report


Driver #1 (Very low cost driver)

Simple AC driver

High Voltage DC

No Isolation

No current limiting

No Insulation

No EMI suppression

No fuse

This type of products could be

highly dangerous.

Driver #2 (Low cost driver)

SMPS DC Driver

Constant current

No Isolation

Tape Insulation

No EMI suppression

No Fuse

The isolation in this driver is

potentially dangerous and could

kill if not paid attention to.

eXalite Driver (CE and ROHS certified)

SMPS DC Driver

Constant current

Full Isolation

Plastic Tube Insulation

Full EMI suppression

Fused

All safety and EU procedures are

respected making the eXalite

totally safe and electrocution risk-

free for users

Driver#1 Driver #2 eXalite driver

Driver


PCB #1 Narrow Board

Fibreglass PCB

SMD3528 LED

Results in:

Poor heat transfer

High chip temperature

Poor Lumens

maintenance

PCB#2 Narrow Board

Aluminium PCB

SMD3014 LED

Results in:

Medium heat transfer

High chip temperature

Good Lumens

maintenance

eXalite PCB Wide Board

Aluminium PCB

SMD3014 LED

Results in:

Optimum heat transfer

Low chip temperature

Excellent Lumens

maintenance

PCB #1 PCB #2 eXalite PCB PCB #1 PCB #2 eXalite PCB

PCB


0

20

40

60

80

100

120

0 Hours 10kHours

20kHours

30kHours

40kHours

50kHours

60kHours

70kHours

80kHours

Bri

ghtn

ess

%

30mA, temp 50C, humidity 35%

3014

3528

5050

3014

The eXalite uses a 3014 high brightness chip that is

packaged by Magnatech LED which outperformances

standard internationally recognized chips 3528 and 5050

as reported in the chart above.

Chip


Casing #1 Casing #2 eXalite Casing

Casing

Note that the thickness of the eXalite`s case is mandatory to maintain the heat dissipation at its highest level.

“Because you deserve to know what you`re paying for”

Simply brilliant


1- The eXalite`s driver is fully certified and complies to all of EU requirements for efficiency and safety;

2- When most of the products reduce their cost by using cheaper, smaller or thinner Aluminium PCB

or even just fiberglass, they affect greatly the lifetime of the tube. To insure an optimum heat

transfer, the eXalite uses a normal-sized Aluminium PCB, the only way to really spread the heat

away.

3- The eXalite uses the latest generation of high brightness 3014 LED chips offering a real 104lm/watt-

tested-lamp-efficiency as a standard specification. Upgradable upon request.

4- The thickness of the casing itself shows the total difference between premium and cheap products

that of course is compromising the lamps lifetime and brightness stability.

At Magnatech LED, we like to do things right, and offer our customers safety, what they pay for and at

the right cost. All our products are fully safe and there will be no bad surprise when you receive it.

magnatech led t8 tube exalite quality report

Documents