made in brazil since 1989
TRANSCRIPT
Made in BrazilSINCE 1989
Minimum Output Impedance: Power @ 14.4V @ 1 Ohm:
Power @ 14.4V @ 2 Ohms:Power @ 14.4V @ 4 Ohms:Power @ 12.6V @ 1 Ohm:
Power @ 12.6V @ 2 Ohms:Power @ 12.6V @ 4 Ohms:
Freq. Resp. (-3dB):Crossover Low Pass:
Crossover High Pass:Bass Boost:
Input Impedance:Power Supply Voltage:
Musical Consumption (12,6V):BASS Consumption (12,6V):
Dimensions (H x W x H):Weght:
Minimum Output Impedance: Power @ 14.4V @ 1 Ohm:
Power @ 14.4V @ 2 Ohms:Power @ 14.4V @ 4 Ohms:Power @ 12.6V @ 1 Ohm:
Power @ 12.6V @ 2 Ohms:Power @ 12.6V @ 4 Ohms:
Freq. Resp. (-3dB):Crossover Low Pass:
Crossover High Pass:Bass Boost:
Input Impedance:Power Supply Voltage:
Musical Consumption (12,6V):BASS Consumption (12,6V):
Dimensions (H x W x H):Weght:
Minimum Output Impedance: Power @ 14.4V @ 1 Ohm:
Power @ 14.4V @ 2 Ohms:Power @ 14.4V @ 4 Ohms:Power @ 12.6V @ 1 Ohm:
Power @ 12.6V @ 2 Ohms:Power @ 12.6V @ 4 Ohms:
Freq. Resp. (-3dB):Crossover Low Pass:
Crossover High Pass:Bass Boost:
Mid Bass:Mid High:
Input Impedance:Power Supply Voltage:
Musical Consumption (12,6V):BASS Consumption (12,6V):
Dimensions (H x W x H):Weght:
1 OHM5300W RMS3300W RMS-5000W RMS2800W RMS-10Hz ~ 12KHz90Hz ~ 12KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dB9K Ohms9V ~ 16V242A485A78 x 231,5 x 332 mm4,2 Kg
1 OHM8600W RMS5100W RMS-8000W RMS4400W RMS-10Hz ~ 12KHz90Hz ~ 12KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dB14K Ohms9V ~ 16V370A740A78 x 231,5 x 423 mm5,8 Kg
1 OHM4000W RMS2200W RMS-3100W RMS2000W RMS-10Hz ~ 22KHz90Hz ~ 22KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dBBoost: 0 ~ +10dBBoost: 0 ~ +10dB18K Ohms9V ~ 16V165A330A78 x 231,5 x 239,5 mm2,9 Kg
2 OHMS-5300W RMS3000W RMS-5000W RMS2600W RMS10Hz ~ 12KHz90Hz ~ 12KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dB9K Ohms9V ~ 16V227A445A78 x 231,5 x 332 mm4,3 Kg
2 OHMS-8700W RMS4400W RMS-8000W RMS4200W RMS10Hz ~ 12KHz90Hz ~ 12KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dB20K Ohms9V ~ 16V360A720A78 x 231,5 x 423 mm5,8 Kg
2 OHMS-3900W RMS2200W RMS-3000W RMS1700W RMS10Hz ~ 22KHz90Hz ~ 22KHz10Hz ~ 90HzFreq: 30Hz ~ 70 HzBoost: 0 ~ +10dBBoost: 0 ~ +10dBBoost: 0 ~ +10dB12K Ohms9V ~ 16V150A300A78 x 231,5 x 239,5 mm2,9 Kg
VULCAN 5000
VULCAN 8000
VULCAN 3000 NEWNEW
NEWNEW
NEWNEW
FREQUENCY RESPONSE (10HZ ~ 12KHZ)
HPF, LPF AND BASS BOOST CONTROLS
FL AT MODE SWITCH
POWER SUPPLY SYSTEM CONTROL
Minimum Output Impedance: Power @ 14.4V @ 2 Ohms:Power @ 14.4V @ 4 Ohms:Power @ 12.6V @ 2 Ohms:Power @ 12.6V @ 4 Ohms:
Freq. Resp. (-3dB):Crossover Low Pass:
Crossover High Pass:Bass Boost:
Mid Bass (Freq. 270Hz):Mid High (Freq. 2KHz):
Input Impedance:Power Supply Voltage:
Musical Consumption (12,6V):BASS Consumption (12,6V):
Dimensions (H x W x H):Weght:
• INPUT: Input of the signal that will be amplified.• LEVEL: Control of the signal level at the amplifier input that will be sent to the audio output.• CROSSOVER: - HIGH PASS FILTER (H.P.F.): This variable control allows to select the initial frequency from 10Hz to 700Hz that will be reproduced by the amplifier. - LOW PASS FILTER (L.P.F.): This variable control allows to select the final frequency from 90Hz to 20KHz that will be reproduced by the amplifier.• BASS BOOST: - BASS: Variable control, for reinforcing bass from 0 to + 12dB. - FREQ: Variable control for actuation of the BASS reinforcement from 30Hz to 60Hz.• MID BASS BOOST: Variable control from 0 to + 12dB with performance in the reinforcement of bass in the frequency of 270Hz.• MID HIGH BOOST: Variable control from 0 to + 12dB with actuation in the reinforcement of mediums in the frequency of 2KHz.• FLAT KEY: This key allows you to turn the FLAT mode on or off. Adjustments made to the CROSSOVER and BOOST controls will be disabled when using this mode.
• COOLER: It provides cooling for the amplifier. Make the installation in ~ ventilated place, without obstructing the air inlets and outlets.• OUTPUT CONNECTOR (SPEAKERS): MONO output of the amplified signal to connect the speakers. Check the minimum impedance and polarities before installing.• POSITIVE POWER CONNECTOR: Connect to the positive battery terminal using ~ cable of at least 21mm² with ~ fuse / circuit breaker (150A) as close as possible to the battery.• REMOTE CONNECTOR (REM): It allows the automatic activation of the amplifier when turning on the radio / player. Connect to the remote output of the radio / player using ~ cable of at least 0.75mm².• NEGATIVE POWER CONNECTOR: Connect to the negative terminal of the battery using ~ cable of at least 21mm².
2 OHMS3700W RMS2500W RMS3000W RMS2000W RMS10Hz ~ 20KHz90Hz ~ 20KHz10Hz ~ 700HzBoost: 0 ~ +12dBFreq: 30Hz ~ 60 HzBoost: 0 ~ +12dBBoost: 0 ~ +12dB9K Ohms9V ~ 16V150A300A78 x 231.5 x 191.5 mm2.3 Kg
Minimum Output Impedance: Power @ 14.4V @ 2 Ohms:Power @ 14.4V @ 4 Ohms:Power @ 12.6V @ 2 Ohms:Power @ 12.6V @ 4 Ohms:
Freq. Resp. (-3dB):Crossover Low Pass:
Crossover High Pass:
2 OHMS3700W RMS2500W RMS3000W RMS2000W RMS10Hz ~ 20KHz90Hz ~ 20KHz10Hz ~ 700Hz
CLASS DAMPLIFIER
INNOVATIVE RESOURCES ROBUST CONNECTORS
NEWNEW
EX5000EQ
EX3000EQPower @ 14.4V - 1 Ohm (RMS):
Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 1 Ohm (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 1 Ohm (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
—3900W2425W2 OHMS13K OHMS0,2V≤ 10% THD> 90 dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB9,5 ~ 15Vdc2A ~ 163A2A ~ 326A77 x 222 x 188 mm2,5 Kg
—5410W3540W2 OHMS26K OHMS0.2V≤ 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9.5 ~ 15Vdc3.1 ~ 275A3.1 ~ 550A77 x 294 x 310 mm4.1 Kg
4100W2590W1500W1 OHM12K OHMS0,2V≤ 10% THD> 90 dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB9,5 ~ 15Vdc2A ~ 175A2A ~ 351A77 x 222 x 188 mm2,4 Kg
5050W3230W2100W1 OHM26K OHMS0.2V≤ 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9.5 ~ 15Vdc4.1 ~ 250A4.1 ~ 500A77 x 294 x 310 mm4.1 Kg
EX1600EQ
EX1200EQPower @ 14.4V - 1 Ohm (RMS):
Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 8 Ohms (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
1560W970W—1 OHM26K Ohms0,2V≤ 10% THD>90dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc1 ~ 57A1 ~ 115A64 x 260 x 170 mm1,7 Kg
—1410W860W2 OHMS25K Ohms0,2V≤ 10% THD>90dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc1 ~ 56A1 ~ 112A64 x 260 x 170 mm1,7 Kg
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 8 Ohms (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
1850W985W650W1 OHM19K OHMS0,2V≤ 10% THD>90dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc1,3 ~ 80A1,3 ~ 160A75 x 310 x 170 mm2,0 Kg
—1820W1100W2 OHMS26K OHMS0,2V≤ 10% THD>90dB10Hz ~ 25KHz50Hz ~ 25KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc1,6 ~ 75A1,6 ~ 150A75 x 310 x 170 mm2,0 Kg
High performance in 1 Channel!
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 8 Ohms (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 8 Ohms (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
15900W11700W1 OHM25K OHMS0,6V≤ 10% THD>90dB10Hz ~ 10KHz50Hz ~ 10KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc5,1 ~ 665A5,1 ~ 1330A77 x 290 x 614 mm9,6 Kg
23000W14200W1 OHM25K OHMS0,6V≤ 10% THD>90dB10Hz ~ 10KHz50Hz ~ 10KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc5,8 ~ 990A5,8 ~ 1980A77 x 290 x 614 mm9,8 Kg
EX13500EQ
EX10500EQ
77 x 290 x 614 mm
EX21000EQ
EX8000EQEQ
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 1 Ohm (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
Power @ 14.4V - 1 Ohm (RMS):Power @ 14.4V - 2 Ohms (RMS):Power @ 14.4V - 4 Ohms (RMS):
Minimum Impedance Output:Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Response @ 1 Ohm (-3dB):
Crossover Low Pass:Crossover High Pass:
EQ - BASS @ 45Hz:EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:Over Clip (Power):
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
—8000W5110W2 Ohms26K Ohms0,2V< 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc5,2 ~ 396 A5,2 ~ 790 A77 x 294 x 445 mm6,3 Kg
—11000W7000W2 OHMS26K Ohms0,2V≤ 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc6,7 ~ 495A6,7 ~ 990A77 x 294 x 510 mm7,5 Kg
8000W4500W2500W1 Ohm25K Ohms0,2V< 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc5,3 ~ 396 A5,3 ~ 750 A77 x 294 x 445 mm6,3 Kg
10500W7000W4800W1 OHM25K OHMS0,2V≤ 10% THD>90dB10Hz ~ 15KHz50Hz ~ 15KHz10Hz ~ 700Hz±10dB±10dB±10dB15%9,5 ~ 15Vdc6,7 ~ 495A6,7 ~ 990A77 x 294 x 510 mm7,5 Kg
HL 800.4
FILTERHIGH / LOW PASS
FILTERHIGH / LOW PASS
FILTERHIGH / LOW PASS
GAINCONTROL
GAINCONTROL
GAINCONTROL
LOW PASS +BASS BOOST
LOW PASS +BASS BOOST
LOW PASS +BASS BOOST
Power @ 13.8V - STEREO 1 Ohm (RMS):Power @ 13.8V - STEREO 2 Ohms (RMS):Power @ 13.8V - STEREO 4 Ohms (RMS):Power @ 13.8V - BRIDGE 2 Ohms (RMS):Power @ 13.8V - BRIDGE 4 Ohms (RMS):Power @ 12.6V - STEREO 1 Ohm (RMS):
Power @ 12.6V - STEREO 2 Ohms (RMS):Power @ 12.6V - STEREO 4 Ohms (RMS):Power @ 12.6V - BRIDGE 2 Ohms (RMS):Power @ 12.6V - BRIDGE 4 Ohms (RMS):
Minimum Output Impedance STEREO:Minimum Output Impedance BRIDGE:
4 x 260W4 x 204W—2 x 520W—4 x 226W2 x 144W—2 x 430W—1 OHM2 OHMS
—4 x 260W4 x 165W—2 x 520W—4 x 225W4 x 140W—2 x 450W2 OHMS4 OHMS
CLASS DAMPLIFIER
HL 2000.4
HL 1200.4Power @ 13.8V - STEREO 1 Ohm (RMS):
Power @ 13.8V - STEREO 2 Ohms (RMS):Power @ 13.8V - STEREO 4 Ohms (RMS):Power @ 13.8V - BRIDGE 2 Ohms (RMS):Power @ 13.8V - BRIDGE 4 Ohms (RMS):Power @ 12.6V - STEREO 1 Ohm (RMS):
Power @ 12.6V - STEREO 2 Ohms (RMS):Power @ 12.6V - STEREO 4 Ohms (RMS):Power @ 12.6V - BRIDGE 2 Ohms (RMS):Power @ 12.6V - BRIDGE 4 Ohms (RMS):
Minimum Output Impedance STEREO:Minimum Output Impedance BRIDGE:
-4 x 320W4 x 170W-2 x 640W-4 x 300W4 x 165W-2 x 600W2 OHMS4 OHMS
4 x 350W4 x 250W-2 x 700W-4 x 300W4 x 200W-2 x 600W-1 OHM2 OHMS
Power @ 13.8V - STEREO 1 Ohm (RMS):Power @ 13.8V - STEREO 2 Ohms (RMS):Power @ 13.8V - STEREO 4 Ohms (RMS):Power @ 13.8V - BRIDGE 2 Ohms (RMS):Power @ 13.8V - BRIDGE 4 Ohms (RMS):Power @ 12.6V - STEREO 1 Ohm (RMS):
Power @ 12.6V - STEREO 2 Ohms (RMS):Power @ 12.6V - STEREO 4 Ohms (RMS):Power @ 12.6V - BRIDGE 2 Ohms (RMS):Power @ 12.6V - BRIDGE 4 Ohms (RMS):
Minimum Output Impedance STEREO:Minimum Output Impedance BRIDGE:
4 x 500W RMS4 x 338W RMS-2 x 1000W RMS-4 x 435W RMS4 x 280W RMS-2 x 870W RMS-1 OHM2 OHMS
-4 x 580W RMS4 x 364W RMS-2 x 1160W RMS-4 x 500W RMS4 x 290W RMS-2 x 1000W RMS2 OHMS4 OHMS
HL 800.42 OHMS
Input Impedance:Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Resp. (-3dB) @ 1 Ohm:
Crossover Low Pass:Crossover High Pass:
Bass Boost:Power Supply Voltage:
Musical Consumption (12,6V):BASS Consumption (12,6V):
Dimensions (H x W x H):Weght:
14K OHMS0,2 V> 0,4 % THD> 90 dB10 Hz ~ 26 KHz90 Hz90 Hz+12 dB9 ~ 15V44A88A66 x 206 x 206 mm1,70 Kg
HL 2000.42 OHMS
HL 1200.41 OHM 2 OHMS
14K OHMS0,2 V> 0,4 % THD> 90 dB10 Hz ~ 26 KHz90 Hz90 Hz+12 dB9 ~ 15 V53 A106 A66 x 206 x 216 mm1,95 Kg
14K OHMS0,2 V> 0,4 % THD> 90 dB10 Hz ~ 26 KHz90 Hz90 Hz+12 dB9 ~ 15 V57 A114 A66 x 206 x 216 mm1,94 Kg
15 Kohms200mV> 0,4 % THD> 90 dB19Hz - 26KHz90 Hz90 Hz+12 dB9 - 15V96A192A77 x 235 x 240 mm2,7 Kg
4 x 225W RMS @ 12,6V
4 x 300W RMS @ 12,6V
4 x 500W RMS @ 12,6V
CLASS DAMPLIFIER
ir 400.4
FILTERHIGH / LOW PASS
SMALLER FMINTERFERENCESMARKET
GAINCONTROL
HIGHPERFORMACE
Power 14,4V @ 2 Ohms:Power 14,4V @ 4 Ohms:Power 13,8V @ 2 Ohms:Power 13,8V @ 4 Ohms:
Minimum Impedance Output:Minimum Input Sensitivity:
Total Harmonic Distortion (THD+N):Signal to Noise Ratio:
Resp. Frequency (-3dB):Crossover Low Pass:
Crossover High Pass:Input Impedance:
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
430W RMS250W RMS400W RMS160W RMS2 OHMSRCA: 200mV / FIO: 1,5V< 0,01 %> 90dB10Hz ~ 22KHz60Hz ~ 22KHz10Hz ~ 700HzRCA 38KOhms / FIO 10KOhms9V ~ 15V18A (13.8V)36A (13.8V)52,5 x 99,8 x 127,5mm508g
ir 400.1
Power 13,8V @ 2 Ohms (Stereo):Power 13,8V @ 4 Ohms(Bridge):
Minimum Impedance Output (Stereo):Minimum Impedance Output (Bridge):
Input Impedance:Minimum Input Sensitivity:
Total Harmonic Distortion(THD +N 1W @ 4Ω):
Signal to Noise Ratio:Resp. Frequency (-3dB) @ 2 Ohms:
Crossover High Pass (H.P.F.):Crossover Low Pass (L.P.F.):
Bass Boost Fixo (L.P.F.):Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
4 x 100 WRMS2 x 200 WRMS2 OHMS4 OHMS20K OHMS200 mV
< 0,01%> 90dB10Hz ~ 24KHz90Hz90Hz14dB @ 45Hz9 ~ 15V17A33,5A52,5 x 127,5 x 99,7mm0,52 Kg
NEW CONNECTOR TO CABLES 6mm
NEW CONNECTOR TO CABLES 6mm
MORE COMPACT
MORE COMPACT
ULTRA HD AUDIO
ULTRA HD AUDIO
BASS POWER REINFORCED
BASS POWER REINFORCED
NEWNEW
ir 280.4ir 280.3ir 280.1
Power @ 13,8V 2 Ohms Stereo:Power @ 13,8V 4 Ohms Stereo:Power @ 13,8V 4 Ohms Bridge:
Minimum Output Impedance (Stereo):Minimum Output Impedance (Bridge):
Input Impedance (RCA):Minimum Input Sensitivity: (RCA):
Total Harmonic Distortion:Signal to Noise Ratio:
Freq. Resp. (-3dB) @ 2 Ohms:Crossover Low Pass:
Bass BoostPower Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
4 x 70 WRMS4 x 40 WRMS2 x 140 WRMS2 OHMS4 OHMS24K OHMS250mV> 0,03 % THD> 90 dB10Hz ~ 48KHz90Hz+12dB9 ~ 15V11,5A23A48x78x112 mm0,350 Kg
Power @ 13,8V 2 Ohms Stereo:Power @ 13,8V 4 Ohms Stereo:
Power @ 13,8V 4 Ohms Sub:Minimum Output Impedance (Stereo):
Minimum Output Impedance (Sub):Input Impedance (RCA):
Minimum Input Sensitivity: (RCA):Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Resp. (-3dB) @ 2 Ohms (Stereo):
Freq. Resp. (-3dB) @ 2 Ohms (Sub):Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
2 x 70 WRMS2 x 40 WRMS1 x 140 WRMS2 OHMS4 OHMS39K OHMS250mV> 0,03 % THD> 90 dB90Hz ~ 29KHz10Hz ~ 90Hz9 ~ 15V11,5A23A48 x 78 x 112 mm0,350 Kg
Power @ 13,8V 2 Ohms:Power @ 13,8V 4 Ohms:Power @ 12,6V 2 Ohms:Power @ 12,6V 4 Ohms:
Minimum Output Impedance:Input Impedance (RCA):
Minimum Input Sensitivity: (RCA):Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Resp. (-3dB) @ 2 Ohms:
Crossover:
Power Supply Voltage: Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
1 x 280 WRMS1 x 150 WRMS1 x 220 WRMS1 x 120 WRMS2 OHMS44K OHMS230mV> 0,03 %> 90 dB10Hz ~ 35KhzLPF: 90HzHPF: 50Hz / HPF: 700Hz9 ~ 15Vdc 11,5A23A48 x 78 x 112 mm0,355 Kg
ir 280.1 ir 280.4ir 280.3
ir 160.2RCA
Power @ 13,8V 2 Ohms Stereo:Power @ 13,8V 4 Ohms Stereo:
Minimum Output Impedance (Stereo):Input Impedance (FIO):
Minimum Input Sensitivity (FIO):Total Harmonic Distortion:
Signal to Noise Ratio:Freq. Resp. (-3dB) @ 2 Ohms:
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
2 x 80 WRMS2 x 45 WRMS2 OHMS2,4K OHMS2V> 0,03 % THD> 90 dB50Hz ~ 23KHz9,5 ~ 15V6,4A12,8A29 x 58 x 77 mm0,115 Kg
Power 13,8V @ 2 Ohms (Stereo):Power 13,8V @ 4 Ohms (Stereo):
Impedncia mínima de saída (Stereo):Input Impedance:
Minimum Input Sensitivity:Total Harmonic Distortion:
Signal to Noise Ratio:Resposta frequência (-3dB) @ 2 Ohms:
Power Supply Voltage:Musical Consumption:
BASS Consumption:Dimensions (H x W x H):
Weght:
2 x 80 WRMS2 x 45 WRMS2 OHMS8,5K OHMS0,270V> 0,03 % THD> 90 dB35Hz ~ 20KHz9,5 ~ 15V6,4A12,8A29 x 58 x 77mm110g
Small size,Giant power!
ir 160.2ir 160.2
One of the SmallestAmplifi er in theWORLD!
FILTERHIGH / LOW PASS
SMALLER FMINTERFERENCESMARKET
GAINCONTROL
HIGHPERFORMACE
STM 1003MULTIPLAYER
Modes of Operation:Supported File Formats:
Supported Sampling Rate:Supported Formatting System:
Storage Support:Ans. Frequency (USB and Micro SD):
Line In:AUX Input Sensitivity (P2)
(MIN GAIN and MAX LEVEL / MAIN):Ans. Frequency (Auxiliary):FM Frequency Supported:Bluetooth Compatibility:
Bluetooth range
Frequency of Operation:Maximum Transmission Power:
Modulation:Safety:
Remote Control Range:Battery Model:
Consumption @3,0Vdc:Dimensions (H x W x H):
Weght:
USB, SD, Auxiliar (LINE), FM and BluetoothMP3 and WAV32 ~ 320 KbpsFAT16 and FAT32Up to 32Gb5Hz ~ 20KHz @ -3dBP2 (3.5mm)860mV (Player Vol.: 5)375mV (Player Vol.: 30)37Hz ~ 51KHz @ -3dB88MHz ~ 108MhzVersin 2.1+EDR or leterUp to 10 Meters (open area)
433,92 MHz10mWFSKCryptography and Rolling Code60 Meters (Open Area)CR2032 (3V)0,01 mA (Min.) ~ 15 mA (Max.)16,5 x 39 x 74 mm27 g
Mixer STM 1003
Multiplayer Module
Control TXM
03 Mixer STM 1003Freq. Resp. (-3dB):
Total Harmonic Distortion:Signal to Noise Ratio (SNR):
Sensitivity ofchannel 1 input:
Sensitivity ofchannel 2 inputs:
4 EQ bandsper channel:
Impedance ofchannel 1 inputs:
Impedance ofchannel 2 inputs:
Output Impedance:
Maximum level of outputs:Power Supply:
Maximum Consumption:Remote Input (REM Connector):
Remote Output (REM Connector):Dimensions (W x H x D):
Weight:
1Hz ~ 75Khz<0,01% (T.H.D.)110dBMic (XLR) Min: 840mV ~ Max 14mVLine (P10) Min: 1,8V ~ Max 26mV
Line (P10/RCA) Min: 1,9V ~ Max: 45mVLow ±15dB (80Hz)Mid Low ±15dB (500Hz)Mid High ±15dB (3K5Hz)High ±15dB (12KHz)Mic (XRL): Desbalanceada 4KOhms Balanceada 8KOhmsLine (P10): Desbalanceada 8,5KOhms Balanceada 17KOhmsLine (P10): Desbalanceada 95KOhmsLine (RCA): Desbalanceada 95KOhmsMain Out (P10/RCA): 47RAux Out (P10/RCA): 47RMain Out (P10/RCA): 16 dBu/4,9VacAux Out (P10/RCA): 16 dBu/4,9Vac9 ~ 16 Vdc400 mA9 ~ 16 Vdc250 mA46,5 x 151 x 199,5 mm700 g
3 CHANNELS
BLUETOOTH
KEY LOCKING SYSTEM
USB / (PENDRIVE)
LOCKED KEY PROTECTION
SD CARD
EASY SYNCHRONISM
FM RADIO
COMPLIANCE WITH ANATEL
P2 / (AUXILIARY INPUT)
INDICATOR LED
EQUALIZER 4 BANDS MAIN LEVEL SLIDE 60MM LONG-RANGE REMOTE CONTROL
NO CONVERTERREQUIRED
INPUTSXLR / P10 / RCA
EQUALIZER4 BANDS
VARIABLEPHASEROTATION
NO CONVERTERREQUIRED
NO CONVERTERREQUIRED
NO CONVERTERREQUIRED
EQUALIZER4 BANDS
NEWNEW
1Hz ~ 75Khz<0,01% (T.H.D.)110dBMic (XLR) Min: 840mV ~ Max 14mVLine (P10) Min: 1,8V ~ Max 26mVLine (P10/RCA) Min: 1,9V ~ Max: 45mV
Low ±15dB (80Hz)Mid Low ±15dB (500Hz)Mid High ±15dB (3K5Hz)High ±15dB (12KHz)Mic (XRL): Unbalanced 4KOhmsBalanced 8KOhmsLine (P10): Unbalanced 8,5KOhmsBalanced 17KOhmsLine (P10): Unbalanced 85KOhmsLine (RCA): Unbalanced 95KOhmsMain Out (P10/RCA): 47RAux Out (P10/RCA): 47RMain Out (P10/RCA): 16 dBu/4,9VacAux Out (P10/RCA): 16 dBu/4,9Vac9 ~ 16 Vdc350 mA9 ~ 16 Vdc350 mA46,5 x 196,5 x 199,5 mm930 g
1Hz ~ 75Khz<0,01% (T.H.D.)110dBMic (XLR) Min: 840mV ~ Max 14mVLine (P10) Min: 1,8V ~ Max 26mVLine (P10/RCA) Min: 1,9V ~ Max: 45mV
Low ±15dB (80Hz)Mid Low ±15dB (500Hz)Mid High ±15dB (3K5Hz)High ±15dB (12KHz)Mic (XRL): Unbalanced 4KOhmsBalanced 8KOhmsLine (P10): Unbalanced 8,5KOhmsBalanced 17KOhmsLine (P10): Unbalanced 95KOhmsLine (RCA): Unbalanced 95KOhmsMain Out (P10/RCA): 47RAux Out (P10/RCA): 47RMain Out (P10/RCA): 16 dBu/4,9VacAux Out (P10/RCA): 16 dBu/4,9Vac9 ~ 16 Vdc250 mA9 ~ 16 Vdc350 mA46,5 x 151 x 199,5 mm700 g
1Hz ~ 75Khz<0,01% (T.H.D.)110dBLine (P10/RCA) Min: 1,9V ~ Max: 45mV
Low ±15dB (80Hz)Mid Low ±15dB (500Hz)Mid High ±15dB (3K5Hz)High ±15dB (12KHz)Line (P10): Unbalanced 95KOhmsLine (RCA): Unbalanced 95KOhmsMain Out (P10/RCA): 47RAux Out (P10/RCA): 47RMain Out (P10/RCA): 16 dBu/4,9VacAux Out (P10/RCA): 16 dBu/4,9Vac9 ~ 16 Vdc230 mA9 ~ 16 Vdc250 mA46,5 x 132 x 199,5 mm0,7 Kg
Freq. Resp. (-3dB):Total Harmonic Distortion:
Signal to Noise Ratio (SNR):Sensitivity of
channels 1 and 2:Sensitivity of
channel inputs 3 to 6:
4 EQ bandsper channel:
Impedance ofchannels 1 and 2:
Impedance ofchannel inputs 3 to 6:
Output Impedance:
Maximum level of outputs:
Power Supply (POWER Connector):Maximum Consumption:
Remote Input (REM Connector):Remote Output (REM Connector):
Dimensions (W x H x D):Weight:
Freq. Resp. (-3dB):Total Harmonic Distortion:
Signal to Noise Ratio (SNR):Sensitivity of
channels 1 and 2:Sensitivity of
channel inputs 3 to 6:
4 EQ bandsper channel:
Impedance ofchannels 1 and 2:
Impedance ofchannel inputs 3 to 6:
Output Impedance:
Maximum level of outputs:
Power Supply (POWER Connector):Maximum Consumption:
Remote Input (REM Connector):Remote Output (REM Connector):
Dimensions (W x H x D):Weight:
Freq. Resp. (-3dB):Total Harmonic Distortion:
Signal to Noise Ratio (SNR):Sensitivity of
channels 1 and 2:
4 EQ bandsper channel:
Impedance ofchannels and 2:
Output Impedance:
Maximum level of outputs:
Power Supply (POWER):Maximum Consumption:
Remote Input (REM):Remote Output (REM):
Dimensions (W x H x D):Weight:
Maximum level of outputs:
Power Supply (POWER Connector):
Remote Input (REM Connector):Remote Output (REM Connector):
STM 0803
STM 0602
STM 1206
Power Supply (POWER Connector):
Remote Input (REM Connector):Remote Output (REM Connector):
NEWNEWNEWNEWNEWNEWNEWNEWNEW
6 CHANNELS
3 CHANNELS
2 CHANNELS
EQUALIZER 4 BANDS
EQUALIZER 4 BANDS
EQUALIZER 4 BANDS
MAIN LEVEL SLIDE 60MM
MAIN LEVEL SLIDE 60MM
MAIN LEVEL SLIDE 60MM
NO CONVERTERREQUIRED
NO CONVERTERREQUIRED
NO CONVERTERREQUIRED
INPUTSXLR / P10 / RCA
INPUTSXLR / P10 / RCA
EQUALIZER4 BANDS
EQUALIZER4 BANDS
EQUALIZER4 BANDS
VARIABLEPHASEROTATION
VARIABLEPHASEROTATION
VARIABLEPHASEROTATION
Long-range remote control ofAudio and Video equipament
*1500ft range in open area(line-of-sight)
16 FUNCTIONS2nd Easy sync
Low-battery indicator onboth remote and central unit
Pre-programmed memory bank for inter-operability with various brands of devices
Anti-copying technology
Power-Saver Samart Mode2nd Function (2nd) button
SX2 Control + Central
STX2448
STX2448
STX2848
Number of Channels:Number of Output Channels:
Input Graphic Equalizer:
Parametric Equalizer:(1 Input + 1 per Output)
Crossover with variable frequency:
Routing between Inputs and Outputs:Delay:Phase:
Limiter:
Output Gain:Master Level:
Memory Positions Save / Load:Safety:
Screen saver:
Number of Channels:Number of Output Channels:
Input Graphic Equalizer:
Parametric Equalizer:(1 Input + 1 per Output)
Crossover with variable frequency:
# Crossover presetsRouting between Inputs and Outputs:
Delay:Phase:
Limiter:
Output Gain:Master Level:
Memory Positions Save / Load:Safety:
Screen Saver:
Language:Audio Generator:
Sweep:
Latency:Input Impedance:
Output Impedance:Signal to Noise Ratio:
Total Harmonic Distortion:Channel Separation:Frequency Response:
Max Input Voltage:Max Output Voltage:
Power Supply Voltage:Current Consumption:
Dimensions (H x W x H):Weight:
Lenguage:Audio Generator:
Sweep:
Pink Noise Generator:
Latência: Input Impedance:
Impedância de Saída: Signal to Noise Ratio:
Total Harmonic Distortion: Separação de Canais:
Resposta em Frequência: Máx. Input Voltage:
Máx. Output Voltage: Alimentação:
Consumo de Corrente: Dimensions (H x W x H):
Weght Kg:
2815 Bands, gain ± 12dB,12 Equalization PresetsGain ± 12dBFactor Q 0.4 to 10.0Butterworth 12/18/24/36/48 dB / 8thLinkwitz-Riley 12/18/24/36/48 dB / 8thA, B or ~ + B0 to 8ms (275cm)0 ° or 180 °Threshold -24 to 0dBAttack 0.1 to 100.0msRelease 1 to 1600msAttack / Release - Manual or Automatic-45 to + 15dB0 to 100%(5) 1 Autosave + 4 memory locations4-digit security passwordEditable text with 15 positions
2815 Bands, gain ± 12dB,12 Equalization PresetsGain ± 12dBFactor Q 0.4 to 10.0Butterworth 12/18/24/36/48 dB / 8thLinkwitz-Riley 12/18/24/36/48 dB / 8th11 (eg Sub / Woofer / Driver / Driver T ...)A, B or ~ + B0 to 8ms (275cm)0 ° or 180 °Threshold -24 to 0dBAttack 0.1 to 100.0msRelease 1 to 1600msAttack / Release - Manual or Automatic-45 to + 15dB0 to 100%(5) 1 Autosave + 4 memory locations4-digit security passwordEditable text with 15 positions
Portuguese, English and Spanish P10Hz to 22KHz,Level -60 to 0dBFreq. initial and final 10Hz to 22KHzLevel -60 to 0dBSpeed control1.08ms10k Ohms47 Ohms> 90dB<0.01%> 80dB10Hz @ 22.5KHz @ -1dB5.6 Vpp (+ 8.2 dBu)5.6 Vpp (+ 8.2 dBu)10V to 15V DC350mA @ 12.6V DC37 x 200 x 101mm455g
Portuguese, English and Spanish10Hz ~ 22KHz,Level -60 ~ 0dBFreq. initial and final 10Hz ~ 22KHzLevel -60 ~ 0dBSpeed Control 10Hz to 22kHzLevel -60 to 0dB1,08ms 10k Ohms 47 Ohms >90dB <0,01% >80dB 10Hz ~ 22,5KHz @ -1dB 5,6 Vpp (+8,2 dBu) 5,6 Vpp (+8,2 dBu) 10V ~ 15V DC 350mA @12,6V DC 37 x 200 x 101 mm 455g
Number of Channels:Number of Output Channels:
Graphic Equalizer:Graphic Equalization Presets:
Parametric Equalizer:
Frequency Response:Variable Frequency Crossover:
Routing between Inputs and Outputs:Delay:Phase:
Limiter:
Output Gain:Master Level:
Audio Generator:Frequency Scan:
Latency:Voltage Chart Monitor
of Battery:Input Impedance:
Output Impedance:Signal to Noise Ratio:
Total Harmonic Distortion:Channel Separation:
Bluetooth version:Safety:Scope:
Max Input Voltage:Max Output Voltage:
Power Supply VoltageCurrent Consumption:
Dimensions (H x W x H) mm:Weight:
2415 Bands, gain ± 12dB125 Bands (1 Input + 4 Outputs)Gain ± 12dB, Q Factor 0.4 ~ 10.010Hz @ 22.5kHz @ -1dBButterworth 12/18/24/36/48 dB / 8thLinkwitz-Riley 12/18/24/36/48 dB / 8thA, B or ~ + B0 to 8ms (275cm)0 ° or 180 °Threshold -24 to 0dBAttack 0.1 ~ 100.0msRelease 1 ~ 1600ms(Attack and Release manual or automatic)-45 ~ + 15dB0 ~ 100%
10Hz ~ 22kHz - Level -60 ~ 0dB10Hz ~ 22kHz - Level -60 ~ 0dB1.08msTime graph, voltage indicatorminimum, current and maximum10k Ohms47 Ohms> 90dB<0.01%> 80dBBluetooth 4.1 Smart Ready + Classic6-digit password150m (Area without obstacles *)5.6 Vpp (+ 8.2 dBu)5.6 Vpp (+ 8.2 dBu)10V to 15V DC300mA @ 12.6V DC34 x 74 x 110130g
Bluetooth Compatibility:Android smartphones and tablets from version 2.3.3, with Bluetooth technology 2.1+ EDR or newer versions;IOS smartphones and tablets from version 8, with Bluetooth 4.0 technology or later* The range is directly influenced by the technology and efficiency of the Bluetooth peripheral of the smartphone or tablet paired with the STX2436.
Routing between Inputs and Outputs:
STX2436
ACTIVATES OTHER PRODUCTS SEQUENTIALLY THROUGH REMOTE CONNECTION (REM). THE ACTIVATION INTERVAL BETWEEN EACH OUTPUT CAN BE CONFIGURED FROM 0s TO 4s.
ACTIVATES OTHER PRODUCTS SEQUENTIALLY THROUGH REMOTE CONNECTION (REM). OUTPUT CAN BE CONFIGURED FROM 0s TO 4s.
NEWNEW
Input Voltage:Output Voltage:Nominal Current:Maximum Power Consumption:Efficiency:Operating Modes:Display Features:AC Input Protection:Under Voltage Protection:Dimensions (H x W x H):Weght:
FONTE 200A
FONTE 120A
Automatic bi-volt (127Vac / 200Vac)12.6V ~ 14.4V120A @ 12.6V127V: 25.5A / 220V: 16A90%Fixed Voltage, Fast Charge and Slow ChargeVoltage and CurrentFuse 20A7.5V77.5 x 198 x 308 mm3.0 kg
Input Voltage:Output Voltage:Nominal Current:Maximum Power Consumption:Efficiency:Operating Modes:Display Features:AC Input Protection:Under Voltage Protection:Dimensions (H x W x H):Weght:
Automatic bi-volt (127Vac / 200Vac)12.6V ~ 14.4V200A @ 12.6V127V: 38A / 220V: 24.5A90%Fixed Voltage, Fast Charge and Slow ChargeVoltage and CurrentFuse 30A7.5V77.5 x 260 x 308 mm4.16 Kg
Input Voltage:Output Voltage:Corrente nominal:Maximum Power Consumption:Efficiency:Operating Modes:Display Features:AC Input Protection:Under Voltage Protection:Dimensions (H x W x H):Weght:
12.6 - 14.4
ADJUSTMENTVOLTAGE:
VOLTAGEAND CURRENTON DISPLAY
AUTOMATICBIVOLT
SCSSYSTEM 12.6 - 14.4
ADJUSTMENTVOLTAGE:
VOLTAGEAND CURRENTON DISPLAY
AUTOMATICBIVOLT
SCSSYSTEM
VENTILATION SYSTEM WITH 60MM COOLERS
Operating Modes: 3
FIXED VOLTAGE: WITH 8 POSSIBLE ADJUSTMENTS
THIS SYSTEM COMBINED WITH TIP ELECTRONIC COMPONENTS, KEEPS THE NOMINAL TENSION AND CURRENT WHILE YOU ENJOY YOUR SOUND, WITHOUT LIMITS.
SLOW LOAD QUICK LOAD IN THESE TWO MODES THE SYSTEM GRADUALLY RAISES THE OUTPUT VOLTAGE AND PULSES THE CURRENT, GUARANTEING ~ MORE EFFICIENT LOAD EXTENDING THE BATTERY LIFE
VDC • 12.6V • 12.8V • 13.2V • 13.4V • 13.6V • 13.8V • 14.2V • 14.4V
NEWNEW
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER INFINITE 120A 2 AUXILIARY BATTERY 150A 8000W EX8000EQ INFINITE 120A 3 AUXILIARY BATTERY 150A 10500W EX10500EQ
INFINITE 120A 4 AUXILIARY BATTERY 150A 13500W EX13500EQ
INFINITE 200A 3 AUXILIARY BATTERY 150A 13500W EX13500EQ INFINITE 200A 3 AUXILIARY BATTERY 150A 21000W EX21000EQ
INFINITE 20A127V: 93V ~ 140V220V: 182V ~ 240V30A50A127V: 3,6A / 220V: 2,4A
AC Operating Voltage:
Current at 12.6V:Maximum Current:AC Consumption:
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V
ABSSYSTEM 12.6 - 14.4
ADJUSTMENTOF VOLTAGE:MANUAL
BIVOLT
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER
INFINITE 20A ORIGINAL BATTERY 40A 400W IR 400.4 INFINITE 20A ORIGINAL BATTERY 45A 800W HL800.4
INFINITE 90A AUXILIARY BATTERY 100A 5000W EX5000EQ INFINITE 90A AUXILIARY BATTERY 150A 6000W EX6000EQ
INFINITE 40A127V: 93V ~ 140V220V: 163V ~ 240V40A60A127V: 7,5A / 220V:4,8A
AC Operating Voltage:
Current at 12.6V:Maximum Current:AC Consumption:
ABSSYSTEM 12.6 - 14.4
ADJUSTMENTOF VOLTAGE:AUTOMATIC
BIVOLT
INFINITE 60A127V: 93V ~ 140V220V: 163V ~ 240V60A76A127V: 12,9A / 220V: 7,8A
AC Operating Voltage:
Current at 12.6V:Maximum Current:AC Consumption:
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V- Temperature
12.6 - 14.4
ADJUSTMENTOF VOLTAGE:
VOLTAGEAND CURRENTNO DISPLAY
ABSSYSTEM
AUTOMATICBIVOLT
INFINITE 90A127V: 93V ~ 140V220V: 163V ~ 240V90A115A127V: 18,0A 220V: 12,5A
AC Operating Voltage:
Current at 12.6V:Maximum Current:AC Consumption:
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V- Temperature
12.6 - 14.4
ADJUSTMENTOF VOLTAGE:
VOLTAGEAND CURRENTNO DISPLAY
ABSSYSTEM
AUTOMATICBIVOLT
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER
INFINITE 40A ORIGINAL BATTERY 45A 1200W EX1200EQ INFINITE 40A ORIGINAL BATTERY 45A 1600W EX1600EQ
INFINITE 40A AUXILIARY BATTERY 75A 3000W EX3000EQ
INFINITE 60A ORIGINAL BATTERY 60A 3000W EX3000EQ INFINITE 60A AUXILIARY BATTERY 60A 3500W EX3500EQ
INFINITE 60A AUXILIARY BATTERY 100A 5000W EX5000EQ
INFINITE 120A127V: 93V ~ 140V 220V: 163V ~ 240V120A154A127V: 24,0A / 220V: 14,9A
AC Operating Voltage:
Current at 12.6V:Maximum Current:AC Consumption:
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V- Temperatura
INFINITE 200A220V 163V ~ 240V200A245A21,5A
AC Operating Voltage:Current at 12.6V:Maximum Current:Consumo max AC (220V):
PROTECTIONS:- Internal Fuse AC Input- DC Output Short Circuit- Low Voltage (Undervoltage): 7.5V- Temperatura
12.6 - 14.4
ADJUSTMENTOF VOLTAGE:
VOLTAGEAND CURRENTNO DISPLAY
ABSSYSTEM220V
TECHNICAL CHARACTERISTICS:Charging System: 10 ~ 24 Batteries in Series at 127V AC From 10 ~ 30 Batteries in Series on 220V ACMaximum Current Output: 16A (220V AC)AC Operating Voltage: 127V and 220VDC operating voltage: 9V ~ 12VMaximum AC Consumption: 18A (127V) and 33A (220V)Dimensions: (HxWxD) 75 x 178 x 296 mmWeght: 2.7 Kg
TECHNICAL CHARACTERISTICS:Charging System: 1 Battery in 127V or 220V AC Up to 17 batteries at 127V AC and 10 ~ 27 batteries at 220V ACMaximum Current Output: 4.5A (220V AC)AC Operating Voltage: 127V and 220VAC Consumption: 5.7A (127V AC) and 9.9A (220V AC)Dimensions: (HxWxD) 46 X 110 x 197 mmWeght: 0.840 Kg.
PROTECTIONS: Internal fuse AC inputOutput polarity inversion
PROTECTIONS:Internal fuse for polarity inversion from the High Voltage output.Polarity inversion of the 12V supply.
INFINITE CHV3000
INFINITE CHV500
12.6 - 14.4
ADJUSTMENTOF VOLTAGE:
VOLTAGEAND CURRENTNO DISPLAY
ABSSYSTEM
AUTOMATICBIVOLT
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER INFINITE 120A 2 AUXILIARY BATTERY 150A 8000W EX8000EQ INFINITE 120A 3 AUXILIARY BATTERY 150A 10500W EX10500EQ
INFINITE 120A 4 AUXILIARY BATTERY 150A 13500W EX13500EQ
POWER SUPPLY RECOMMENDED BATTERY RECOMMENDED POWER INFINITE 200A AUXILIARY BATTERY 150A 13500W EX13500EQ INFINITE 200A AUXILIARY BATTERY 150A 21000W EX21000EQ
Consumption: 15 mAStandby consumption: 0.2 mADimensions (WxDxH): 47 x 53 x 16 mmWeght: 12.8 g
MINI VT
Consumption: 50 mAStandby consumption: 11 mADimensions (WxDxH): 75 x 110 x 35 mmWeght: 90 g
VT 3
Standby consumption: 11 mA
DIGITAL VOLTMETER
Functions and Features:Easy InstallationRemote OutputAutomated Audio System ActivationCompatible with Original Vehicle Systems
ST6000ADAPTER WIRE/RCA
DIGITAL VOLTMETER
COMPATIBLE WITHORIGINAL SYSTEM
AUTOMATICACTIVATION
EASYINSTALLATION
WITH AUTOMATIC REMOTE COMPATIBLE WITH NETWORK SYSTEM (CAN)
VOLTAGE SCALE7 ~ 30VDC
VOLTAGE SCALE7 ~ 30VDC
COMPATIBLE WITH NETWORK SYSTEM (CAN)
NEWNEW
HOT SELLER
High Way:
Mid High Way:
Mid Low Way:
Low Way:
Frequency Response:Max Output Voltage:
Max Input Voltage:Signal to Noise Ratio:
Input Impedance:Total Harmonic Distortion:
Channel Separation:Power:
Current Consumption:Output Impedance:
Dimension (A x L x C) mm:Weght:
High Pass 400Hz ~ 10KHz (12 dB/8ª)PHASE 0º or 180ºHigh Pass 150Hz ~ 5KHz (12 dB/8ª)Low Pass 600Hz ~ 12KHz (12 dB/8ª)High Pass 70Hz ~ 5KHz (12 dB/8ª)Low Pass 300Hz ~ 10KHz (12 dB/8ª)Low Pass 45Hz ~ 300Hz (12 dB/8ª)Subsonic Filter FLAT/30/50/80Hz (24 dB/8ª)PHASE 0º and 180º (20Hz ~ 200Hz)Bass Boost (25Hz ~ 110Hz) -(0 ~ +12dB; 60Hz)20Hz ~ 200KHz9V RMS4V RMS>90dB10K OHMS< 0,02% THD> 80dB10V ~ 16V DC0,25A50 OHMS 33 x 160 x 264780g
CROSSOVER
STX104NUMBER
OF WAYS: 5
Signal to Noise Ratio:
Total Harmonic Distortion:
Dimension (A x L x C) mm:
STX104NUMBER
OF WAYS: 5
Highly flexible cablesHigh Pressure RCA Connectors
Highly flexible cablesHigh Pressure RCA ConnectorsShielded RCA Connectors, Lightly Coated in Gold
Cable 1M
Cable 5M
Cable Y1F / 2M
Cable Y2F / 1M
Cable 5M Cable 1M
Cable Y2F / 1M
Cable Y1F / 2M
HOT SELLER
CABOS RCA
SILVER
BRONZE
STF-2
Protects the RCA outputs of the CD Player fromreturn by “GROUND”.High Quality of SOUND.Eliminates noise from the car’s electrical system.Flat response from 20Hz to 50KHz.
ANTI NOISE FILTER RCAAUDIO CONVERTERANTI NOISE FILTER / REMOTE OUT
Protects the RCA outputs of the CD Player fromANTI NOISE FILTER / REMOTE OUT
ST6100
Converts low impedance output(WIRE output) for high impedance (RCA)REMOTE output by audio detectionAnti noise filter eliminates installation loopsPrevents engine noise
Phone: +55 (18) 2104-9412
Av. Mariano Arenales Benito, 645 - Distrito Industrial ZIP: 19043130 - Presidente Prudente | SP | Brazil
Fábrica
Follow us
www.STETSOM.com
also on social networks:
Made in BrazilSINCE 1989