madden mf series diaphragm metering pumps pump data sheet.pdf · madden mf series diaphragm...
TRANSCRIPT
MADDEN MF Series Diaphragm Metering PumpsAccurate, Dependable Metering Pumps for Liquid Chemicals
These simple, rugged, accurate pumps are used in many industrial plants for injecting a controlled flow of highly reactive liquids such as acids, caustics and water treatment chemicals. Heavy duty industrial grade construction means these tough pumps will deliver many years of trouble free 24-7-365 pumping.
� MF Series pumps are designed for ±1% steady state repeatable accuracy over a 10:1 turndown range. � Manual output control knob is located on top of the pump for easy access. � Automatic pump output control is available for pumps equipped with a variable speed motor, such as the
Franklin Type IMDS motor. (See type F catalog sheet) � Industrial grade worm gear reducer is integral with the pumping mechanism. Precision internal pump
parts run in an oil bath for extended service life. No external lubrication required. � Double diaphragm option is available for superior protection from dangerous liquids. � When equipped with the proper materials the MF Series pumps are excellent for pumping dangerous
liquids such as acids, caustics and solvents. Liquids with suspended solids such as diatomaceous earth and lime slurry can be accurately pumped.
� Standard motors are industrial grade 1/4 to ¾ HP 56 frame,, foot mounted TEFC. Motors are available for explosion proof, washdown, and mill & chem plant duty, and for 1 or 3 phase, 50 or 60 Hz power.
� Tough fabric reinforced rubber diaphragms protect the drive train from the pumped liquid. The short stroke with 3" diameter piston increases diaphragm life by reducing fatigue.
� See the cutaway photo for details of the internal pump construction features
MF SERIES DIAPHRAGM METERING PUMPS
MADDEN Manufacturing, Inc. Box 387, Elkhart, IN 46515, USA Ph: 574-295-4292, Toll Free: 800-369-6233, FAX: 574-295-7562 E-mail: [email protected] Website: www.maddenmfg.com
Data Sheet no. MF03
MF SERIES DIAPHRAGM METERING PUMPS
MADDEN Manufacturing, Inc. Box 387, Elkhart, IN 46515, USA Ph: 574-295-4292, Toll Free: 800-369-6233, FAX: 574-295-7562 E-mail: [email protected] Website: www.maddenmfg.com
Data Sheet no. MF03
Pump Models and Wetted End Materials
MF Series Pumps, Simplex (one pumping head) Model No. Output
range GPH Output range L/hr
Max pressure psi/bar
Piping connection
Motor HP/kw
Stroke speed, 1,725 rpm motor
MF105A 0.5-5 1.9-18.9 300/21.1 3/8” NPT 1/3/.25 29 spm MF110A 1-10 3.8-37.8 150/10.6 3/8” NPT 1/3/.25 29 spm MF110C 1-10 3.8-37.8 300/21.1 3/8” NPT 1/2/.37 29 spm MF118A 1.8-18 6.8-68 150/10.6 3/8” NPT 1/3/.25 58 spm MF118C 1.8-18 6.8-68 300/21.1 3/8” NPT 1/2/.37 58 spm MF136A 3.6-36 13.6-136 150/10.6 3/8” NPT 1/3/.25 115 spm MF136C 3.6-36 13.6-136 300/21.1 3/8” NPT 1/2/.37 115 spm MF160A 6-60 22.7-227 80/5.6 3/8” NPT 1/3/.25 172 spm MF160C 6-60 22.7-227 160/11.2 3/8” NPT 1/2/.37 172 spm MF160D 6-60 22.7-227 250/17.6 3/8” NPT 3/4/.56 172 spm MF190C 7.5-75 28-280 35/2.5 ¾” NPT 1/2/.37 172 spm
MF Series Pumps, Duplex (two pumping heads) Model No. Output
range GPH per head
Output range L/hr per head
Max pressure psi/bar
Piping connection
Motor HP/kw
Stroke speed, 1,725 rpm motor
MF205A 0.5-5 1.9-18.9 300/21.1 3/8” NPT 1/3/.25 29 spm MF210C 1-10 3.8-37.8 300/21.1 3/8” NPT 1/2/.37 29 spm MF218C 1.8-18 6.8-68 300/21.1 3/8” NPT 1/2/.37 58 spm MF236C 3.6-36 13.6-136 300/21.1 3/8” NPT 1/2/.37 115 spm MF260C 6-60 22.7-227 160/11.2 3/8” NPT 1/2/.37 172 spm MF260D 6-60 22.7-227 250/17.6 3/8” NPT 3/4/.56 172 spm MF290C 7.5-75 28-280 35/2.5 ¾” NPT 1/2/.37 172 spm For total output capacity when both outputs are combined multiply data above by 2. **Standard motor speed is 1725 rpm. For 1425 rpm 50 Hz motors multilply the figure given by .833. For duplex pumps with the output of both pumping heads combined multiply the figure given by 2.
Wetted end materials to resist corrosion and abrasion Solution head and valve bodies
Diaphragm Backup Diaphragm
Valve balls Valve seats
PVC Neoprene Neoprene 316 SS NeopreneTeflon TFE/Neo Hypalon Ceramic Hypalon
Hypalon Viton Hastelloy C Viton Viton Telfon Teflon
316 SS
316 SSCeramic
PolypropyleneTFE/Viton
MF SERIES DIAPHRAGM METERING PUMPS
MADDEN Manufacturing, Inc. Box 387, Elkhart, IN 46515, USA Ph: 574-295-4292, Toll Free: 800-369-6233, FAX: 574-295-7562 E-mail: [email protected] Website: www.maddenmfg.com
Data Sheet no. MF03
Pump SpecificationsSPECIFICATION: The Contractor shall furnish a diaphragm metering pump as follows: liquid to be pumped: (liquid), pumping rate: GPH, at a maximum pressure: PSI. The pump output will be adjustable from 0 to 100% while the pump is running using an adjustment knob located on the pump top. The pump will be of the mechanical diaphragm type with the piston directly connected to the diaphragm. Single check ball valves for both the suction and discharge connections will be included. The industrial grade gear reducer will have a bronze wheel and steel worm, and will be lubricated with an oil bath. The pump mechanism will be enclosed and running in an oil bath. No external lubrication will be required. Pump wetted end materials of construction: wetted end: , diaphragm: , replaceable valve seats: ________, double valve balls: , (optional: Type DDB double diaphragm will be provided for extra protection from the pumped liquid, backup diaphragm material: .) The piping connections will be horizontal. Size: 3/8” NPT (or optional ½” or ¾” NPT vertical). The motor will be 56 frame foot mounted, connected with a flexible coupling to the gear reducer, (___) HP, 1/60/115-230 or 3/60/230-460, 1725 rpm, TEFC. Paint finish: (manufacture’s standard acrylic enamel, or optional polyurethane top coat with epoxy primer for premium corrosion resistance.) Preferred manufacturer: Madden Manufacturing, Inc., Model no. MF____ (simplex or duplex) diaphragm metering pump, rated for (___) gallons per hour.