8/20/2019 Machine Shop Kits

1/1

FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE 800-872-6500PAGE 28

MODEL #BG-1BENCH GRINDER KIT

Actual Working Model1890’s Bench Grinder

This bench grinder with standis 1/12 scale, 4” high, 1-7/8”wide, 1-1/2” deep. Kit comes

complete with 4 easymachining aluminum castings,all required hardware,material, bar stock, andcomplete working drawings. #BG-1 $29.00

MODEL #CS-1CRANK 

SHAPER KITActual Working

ModelThis shaper is1/12 scale replicathat is 5” high, 5”

long and 4” wide.Complete with 11

easy machining aluminum castings, requiredhardware, material, bar stock, precut gear stock, finished miter gears, workingdrawings. #CS-1 $103.00

MODEL #AP-3ARBOR PRESS KITActual Working Model1890s Arbor PressMeasures 2” wide by4-3/4” high. Kit iscomplete with 4 easy

machining aluminumcastings, all requiredhardware, material, bar stock, and drawings.#AP-3 $35.00

MODEL #WL-1 WOOD LATHEKIT This is a replica of the Charles A

Strelinger #781Reed FootLathe. Run it on‘finger’ power or you can hook it up to your line

shaft power. Itis 1/12 scale,4” long and4-1/2” high.

Model Description Price

LSH-1 Line shaft hanger $5.50

LSP-100 Belt pulley 1” x 1/4” 2.20

LSP-175 Belt pulley 1-3/4” x 5/8” 4.25

LSB-4 Belting 1/4”.018” th. 2.10/ ft

LSB-8 Belting 1/2”.018” th. 3.90/ ft

RRS-3 Shaft 3/16” CRS, 1 foot .95/ ft

MODEL #DP-1DRILL PRESS KIT

Actual Working Model1890’s Drill Press

Drill press is 1/12 scale, 6-1/2”high, and you can actually drillholes with it. Kit comescomplete with 13 easy machiningaluminum castings, all requiredhardware, material, bar stock,

 pre-cut gear stock, finished bevelgears, and complete workingdrawings. #DP-1 $79.00

MODEL #EL-1

ENGINE LATHE KITActual Working Model

1890’s Engine LatheLathe measures 6-1/2” long and 4-1/2”high. It is a 1/12 scale working replica ofa 16” lathe from the 1890’s. Kitcomplete with 19 easy machiningaluminum castings, all requiredhardware, material, bar stock, gear stock,and complete working drawings. Alsoincludes cone pulley for jack shaft.

#EL-1 $142.00

LINE SHAFT ACCESSORIES

UNMACHINED MODEL PIPE CASTINGS

3/16-40 1/4-405/16-27

(1/16 NPT)

Cross PX3 $.70 PX4 $.80 PX5 $.90Tee PT3 .70 PT4 .80 PT5 .90

90? elbow PL3 .70 PL4 .80 PL5 .90

45? elbow PF3 .70 PF4 .80 PF5 .90

Coupling PC3 .70 PC4 .80 PC5 .90

Street Ells PS3 .70 PS4 .80 PS5 .90

UNMACHINED TREE OF NINE MODEL PIPE CASTINGS1/8” 3/16-40 1/4-40 5/16-27 (1/16 NPT)

P92 $4.15 P93 $4.65 P94 $6.85 P95 $11.00

MACHINED MODEL PIPE FITTINGS3/16-40 1/4-40 5/16-27 (1/16 NPT)

Cross PX3M $2.60 PX4M $2.55 PX5M $3.50

Tee PT3M 2.30 PT4M 2.30 PT5M 3.0090? elbow PL3M 2.30 PL4M 2.30 PL5M 2.90

45? elbow PF3M 2.30 PF4M 2.30 PF5M 2.90

Coupling PC3M 2.00 PC4M 2.00 PC5M 2.20

Reduc. bushing -- -- PR4M 2.20 PR5M 2.90

reduce to 3/16 reduce to 1/4

Plug PP3M 1.10 PP4M 1.25 PP5M 1.60

Boiler bushing PB3M 1.10 PB4M 1.25 PB5M 1.60

Close Nipple PN3M 2.10 PN4M 2.20 PN5M 2.30

Union PU3M 5.00 PU4M 5.50 PU5M 6.25

Street Ells PS3M 2.30 PS4M 2.40 PS5M 2.75

MODEL #TS-1 TABLE SAW KITActual Working Model

This 1/12 scale replica of the #1 Crescent“saw-table” measures 3-3/8” wide, 4-3/4”long, and 3-5/8” high. It comes with 9 easymachining aluminum castings, hardware,material, bar stock, belting, saw blade, anddrawings. #TS-1 $79.00

Line shaft accessories areused to transmit the engine’s

 power to machine shoptools. These are casting kitsand machining is required.

 MACHINE SHOP MODEL KITS

MODEL #MM-1MILLING

MACHINE KIT

Actual WorkingModel 1890’sMilling MachineThis is a 1/12 scalereplica whichmeasures 4-1/8” high,4-1/4” long, and 3-1/2” wide. Complete

with 10 easy machining aluminum castings, allrequired hardware, material, bar stock, precutgear stock, finished miter gears, completeworking drawings. #MM-1 $89.00

#WL-1 $60.00