PPT-SM-MG2014, Rev. 01.19.161

Copyright © 2014, Rev. 01.19.16 by PEC Safety Management, Inc.

Machine Guarding

PPT-SM-MG2014, Rev. 01.19.16

The Importance of Machine Guarding• Amputations are among the most severe and disabling workplace

injuries

• Amputations may result from improperly using machines

• In 2005, 8,450 non-fatal amputations occurred within the private industry sector

• In 2008, machines were the primary or secondary source of 604 work-related fatalities (BLS, 2010b)

• That same year, machinery was the source of 64,170 cases involving days away from work (BLS, 2010b)

• Protect yourself from amputations and other hazards by using effective machine guarding

2

PPT-SM-MG2014, Rev. 01.19.16

The Importance of Machine Guarding

• Machine-related injuries may include– Crushed hands and arms– Severed fingers and limbs– Lacerations and abrasions

• Moving machine parts create many hazards– Pinch points– Rotating parts– Flying chips– Sparks

3

PPT-SM-MG2014, Rev. 01.19.16

Machine Guarding• Guards are barriers which prevent

access to danger areas– Act as physical barriers– Enclose and prevent employee contact with

dangerous machine parts• Machine guards are essential for

protecting you from preventable injuries

4

PPT-SM-MG2014, Rev. 01.19.16

Three Parts of a MachineAll machines consist of three areas• Point of operation

– Where work is performed on the material– Work may include cutting, shaping, boring, or forming of stock

• Power transmission device– All components of the machine that transmit energy to the part of the

machine performing work– Include flywheels, pulleys, belts, connecting rods, couplings, cams,

spindles, chains, cranks, and gears• Other moving parts

– All parts of the machine that move while the machine is energized– May include reciprocating, rotating, and transversely moving parts, as

well as feed mechanisms

5

PPT-SM-MG2014, Rev. 01.19.16

Hazardous Mechanical Motions• Rotating motion

– Circular motion– Generated by rotating collars, couplers, cams, clutches, flywheels,

shaft ends, and spindles– May grip clothing or force a body part into a dangerous location

• Reciprocating motion– Back-and-forth or up-and-down motion– May strike or entrap an employee between a moving part and a

fixed object• Transverse motion

– Motion in a straight, continuous line– May strike or catch employee in a pinch or shear point

6

PPT-SM-MG2014, Rev. 01.19.16

Hazardous Mechanical Actions• Cutting action

– Involves rotating, reciprocating, or transverse motion– Seen in band saws, circular saws, boring or drilling machines, turning machines, or

milling machines• Punching action

– Results when a slide or ram hits a fixed object– Seen in power presses and iron workers

• Shearing action– A slide or knife trims metal or other materials– Seen in mechanical, hydraulic, or pneumatic shears

• Bending action– A slide draws or stamps metal– Seen in power presses, press brakes, and tubing benders

7

PPT-SM-MG2014, Rev. 01.19.16

Machine Guard Requirements• Prevent contact

– Must prevent hands, arms, or any other part from making contact with dangerous moving parts

• Secure– Guard should not be easily removed

• Protect from falling objects– Should ensure that no objects can fall into moving parts or strike worker

• Create no new hazards– Guard should not present new hazards

• Create no interference – Should not impeded worker from performing job

• Allow safe lubrication– Should be able to lubricate machine without removing guard

8

PPT-SM-MG2014, Rev. 01.19.16

Four Types of Machine Guards• Fixed• Interlocked• Adjustable• Self-adjusting

9

PPT-SM-MG2014, Rev. 01.19.16

Fixed• Characteristics

– Permanent part of the machine– May be constructed of sheet metal, screen, wire

cloth, bars, or plastic• Safeguarding action

– Provides a barrier– Allows for stock feeding but does not permit

operator to reach danger area10

PPT-SM-MG2014, Rev. 01.19.16

Interlocked• Characteristics

– When opened or removed, automatically shuts off machine– Stops all moving parts– Machine cannot cycle or be started until guard is back in

place• Safeguarding action

– Shuts off or disengages power, stops the moving parts, and prevents the starting of the machine when the guard is open

– Stops machine before worker can reach into the danger area

11

PPT-SM-MG2014, Rev. 01.19.16

Adjustable• Characteristics

– Allows flexibility in accommodating various sizes of stock

• Safeguarding action– Provides a barrier that may be adjusted to

work with a variety of production operations

12

PPT-SM-MG2014, Rev. 01.19.16

Self-adjusting• Characteristics

– Guard opens and closes to admit stock

• Safeguarding action– Provides a barrier that moves according to

the size of the stock entering the danger area

13

PPT-SM-MG2014, Rev. 01.19.16

SafeguardingThere are two types of safeguarding methods• Primary safeguarding methods

– Guards– Some type of safeguarding device

• Secondary safeguarding methods– Probe detection and safety edge devices– Awareness devices

14

PPT-SM-MG2014, Rev. 01.19.16

SafeguardingSafeguarding devices are primary safeguarding methods that detect or prevent inadvertent access to a hazard• Prevent machine operation if your hand or body

part is placed in the danger area• Restrain or withdraw your hands from the danger

area • Require you to place both hands on machine

controls

15

PPT-SM-MG2014, Rev. 01.19.16

SafeguardingPrimary safeguards include• Pullback devices

– A series of cables are attached to the operator’s hands, wrists, or arms

– As the machine begins to cycle, the operator’s hands are pulled out of the danger area

• Restraint devices– Cables are attached to operator– Prevents operator from reaching into the danger area– Operator must use hand-feeding tools

16

PPT-SM-MG2014, Rev. 01.19.16

Safeguarding Devices• Presence-sensing mats

– Senses operator is near danger area and shuts off machine

• Two-hand control – Requires operator to use both hands on

separate controls– Prevents hands from being in the danger area

when machine cycle states

17

PPT-SM-MG2014, Rev. 01.19.16

Safeguarding Devices• Two-hand trip

– Requires concurrent use of both hands – Prevents hands from being in danger area

when machine starts• Gates

– Movable barrier that protects the operator at the point of operation

18

PPT-SM-MG2014, Rev. 01.19.16

Additional Guarding• Exposed fan blades must be guarded by a

barrier with openings no larger than ½ inch• Interlock revolving barrels, containers, and

drums • Securely anchor fixed machines to prevent

walking or moving• Use Lockout/Tagout

19

PPT-SM-MG2014, Rev. 01.19.16

Training• Operators should receive specific and detailed

training in safeguarding against mechanical hazards• Operator training should explain

– The hazards associated with particular machines– How and why to use each safeguard– How and under what circumstances safeguards can be

removed– When lockout/tagout is required– What to do if a safeguard is damaged, missing, or

inadequate

20

PPT-SM-MG2014, Rev. 01.19.16

Machine Maintenance and RepairWhen performing machine repair and maintenance, each piece of equipment should be safeguarded• Notify all affected employees that the machine or equipment

must be shut down to perform maintenance or repairs• Stop the machine• Isolate the machine or piece of equipment from its energy

source• Lock out or tag out the energy source• Relieve any stored or residual energy• Verify that the machine or equipment is isolated from the

energy source

21

PPT-SM-MG2014, Rev. 01.19.16

Machine Maintenance and RepairWhen machine maintenance and repairs are finished, the following steps should be followed to put the machine back in service• Inspect the machine to ensure that all guards and safety

devices are in place and functional• Check the are to ensure that start up of the machine will not

endanger employees• Remove lockout/tagout devices• Reenergize the machine• Notify all affected employees that the machine is back up

and running

22

PPT-SM-MG2014, Rev. 01.19.16

Personal Protective Equipment• Appropriate PPE provides the last line of defense in

machine guarding• Appropriate PPE may include

– Hard hats– Face shields, safety goggles, or glasses– Hearing protection– Protective coveralls, jackets, vests, aprons, or full-body

suits– Special sleeves and gloves– Safety shoes and boots

23

PPT-SM-MG2014, Rev. 01.19.1624

Safety Meeting Quiz: Machine GuardingSign and date this quiz sheet. Circle the letter representing the correct answer to each quiz question below.

Name:©

2014 PEC Safety, Inc.

QUIZ-SM-MachIne GUardInG rev. Jan.19 2016

Date:Machine Guarding

1. Machine guards are essential for protecting you from preventable injuries.A. trueB. false

2. ___________ are barriers which prevent access to danger areas.A. Operational controlsB. Lockout/tagoutsC. Point of operationsD. Guards

3. The point of operation is ______________.A. any component of the machine that transmits energy to the part of the machine

performing workB. where work is performed on the materialC. any part of the machine that moves while the machine is energizedD. the emergency stop button

4. Transverse motion may ______________.A. grip clothing or force a body part into a dangerous locationB. may strike or entrap an employee between a moving part and a fixed objectC. may strike or catch an employee in a pinch or shear pointD. none of the above

5. For machine guards to be effective, they must _______________.A. be easy to removeB. create no new hazardsC. allow contactD. create interference

6. Which of the following is a type of machine guard?A. fixedB. pullbackC. restraintD. gates

7. Safeguarding devices are primary safeguarding methods that detect or prevent inadvertent access to a hazard.

A. trueB. false

8. Operator training should explain ______________.A. the hazards associated with particular machinesB. how and why to use each safeguardC. how and under what circumstances safeguards can be removedD. all of the above

9. When performing machine repair and maintenance, _______________.A. notify all affected employeesB. allow the machine to continue runningC. verify that the machine is connected to its energy sourceD. all of the above

10. Appropriate PPE is the first line of defense in machine guarding.A. trueB. false

Safe

ty M

eetin

g ans

wer K

ey: M

achin

e Gua

rding Instructors: The following key shows the answers for the Machine Guarding safety meeting quiz.

© 2

014

PEC

Saf

ety,

Inc.

KeY-SM-MachIne GUardInG rev. Jan.19 2016

Mach

ine G

uard

ing

1. A

2. D

3. B

4. C

5. B

6. A

7. A

8. D

9. A

10. B

This is to certify that

has successfully completed thePEC Safety Meeting

Date AwardedInstructor

Machine Guarding