m89 bass overdrive - kibo software, inc · sample settings m89 bass overdrive power the mxr bass...
TRANSCRIPT
92503013534 revA
M89 BASS OVERDRIVE
SCORE/FOLD SCORE/FOLDSHORT TRIM
Dunlop manufacturing, inc.150 industrial Way P.O. Box 846 Benicia, CA 94510 Phone: 707.745.2722fax: 707.745.2658
Warning: the information contained in this document is the intellectual property of Dunlop. Any use and/or reproduction, in whole or in part, must have the written permission of Jim Dunlop Manufacturing, inc.
M89 bass overdrive 4/4 CoLor ProCess
Dunlop part #: 92503013534REVAupC #: N/A
File name: 92503013534REVA_M89_MAN.Ai
File Date: 12/10/12Dieline DoeS not print
Flat SiZe: W= 8” x L= 4.875“ FiniSHeD SiZe: W= 4” x L= 4.875”
print material: 100# DULL COVERprinting SiDe 1: 4CP = CMYKprinting SiDe 2: 4CP = CMYKFontS: (ALL fONts OUtLiNED)linkeD imageS: N/ABinDerY: sCORE & fOLDnoteS:
ConCept
reViSeD
prooF
Quote
Final art
proJeCt DireCtor: GRAHAM sHAW
DeSigner: HANK ALVA
ContaCt: [email protected]
92503013534revA_M89_man.indd 1-3 12/10/12 10:54 AM
SAMPLE SETTINGS
M89 BASS OVERDRIVEPOWER The MXR Bass Overdrive is powered by one 9 volt battery (remove bottom plate to install), a 9 volt AC Adapter such as the Dunlop ECB003/ECB003EU or a power supply such as the DC Brick™.
DESCRIPTION • A unique overdrive circuit designed specifically for bass • Separate clean and drive controls for tonal versatility • 100% analog circuitry for rich warm tone
DIRECTIONS• Run a cable from your bass
to the Bass Overdrive’s Input jack and run another cable from the Bass Overdrive’s Output to your amplifier.
• Set all controls to the 12 o’clock position.
• Turn the effect on by depressing the FOOTSWITCH.
• Rotate the CLEAN control clockwise to increase the blend of preset EQ clean signal or counterclockwise to decrease it.
SPECIFICATIONS Input Impedance 1 MΩ Output Impedance <10 kΩ
Signal to Noise* >95 dB
Current Draw 19 mA Power Supply 9 volts DC
*A-weighted, Vref = 1Vrms
• Rotate the VOLUME control clockwise to increase the overall volume of the effect or counterclockwise to decrease it.
• Rotate the TONE control clockwise for a brighter tone or counterclockwise for a darker sound.
• Rotate the DRIVE control clockwise to increase the amount of overdrive or counterclockwise to decrease it.
IRON HAND SMOOTH DRIVEBULLS ON PARADE
DUNLOP MANUFACTURING, INC. P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
CLEAN knob blends in a tuned clean signal with the overdrive signal
VOLUME knob controls the overall volume of the pedal
TONE knob controls the color of the overdrive signal
DRIVE knob controls the amount of overdrive
FOOTSWITCH toggles effect on/by bass (white LED indicates on)
SCORE/FOLD SCORE/FOLD SHORT TRIM
92503013534revA_M89_man.indd 4-6 12/10/12 10:54 AM