m4 wall-chart
DESCRIPTION
ÂTRANSCRIPT
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
Narrow PlatformØ3.30
Standard PlatformØ3.75
Standard PlatformØ4.20
1200-1500
900-1200
500-700
200-500 15-25
Ø1.90 Ø2.40 Ø2.80 Ø3.00-Ø3.30
Ø3.30
Drilling Speed (RPM)
Drilling Speed (RPM)
Drilling Speed (RPM)Diameter
Diameter
Diameter
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
200-500 15-25
Ø3.20 Ø3.20Ø3.75
Ø3.75
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
200-500 15-25
Ø3.80 Ø3.20Ø4.20
Ø4.20
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2OR1 2
Optional for bone type1&21
MT-CSN33 Countersink for bone type 3&4
2
OR1 2
Optional for bone type1&21
MT-GDN33 Countersink for bone type 3&4
2
OR1 2
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2
®
MP-WCM4P Rev.5 Nov.2016
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
For cleaning and sterilization instructions, please refer to the included ‘Cleaning and Maintenance Instructions for Surgical Instruments’.
© MIS Corporation. All rights reserved.
Wide PlatformØ5
Wide PlatformØ6
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
200-500 15-25
Ø4.50 Ø4.50Ø5.00
Ø5
Drilling Speed (RPM)
Diameter
Optional for bone type1&21
MT-GDN50 Countersink for bone type 3&4
2
OR1 2
1200-1500
900-1200
500-700
Ø1.90 Ø2.40 Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
200-500
Ø5 Ø4.50Ø6.00
Ø6
300-500
Ø5.50
15-25Drilling Speed (RPM)
Diameter
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
Manufactured by:
EC REP
MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
The drilling sequence is demonstrated by a 13mm implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
OR1 2