m1 garand loads
DESCRIPTION
reload instructionsTRANSCRIPT
I use the following loads. I have fired tens of thousands of .30-06 ammo in
Garand Rifles with these loads with no ill effects.
46 gr IMR 4895 with 168 gr Hornady or Sierra or 173 gr M72 .3o Match bullet
44-48 gr IMR 4895 with 150 gr Hornady soft point or 152 gr USGI .30 M2 bullet
I started shooting reloads in M1 Garand rifles in 1962.
Doug
Forums | Stopping Power | Articles |
All | Accurate Arms | Alliant | Guests | Hodgdon | Vihtavuori | Winchester | Taffin Tests | New Loads | Calibers in list format
All Load Data
Handgun Rifle
Sort by: Powder Velocity Set alternate row color
30-06 Springfield, all bullet weights Bullet Powder Weight Powder Velocity OAL Primer Source
100gr JSP 51.0 gr Imr-4895 3,129 fps 2.841" CCI LR guest
Speer plinker bullet. 22" Ruger.Fed. brass
100gr SP 59.0 gr 760 Unknown Fed LR guest
110gr
52.7 gr Win 748 3,230 fps Winchester Suggested starting load: 47.4 gr
Pressure: 47,000 CUP
110gr
59.0 gr Win 760 3,210 fps Winchester Suggested starting load: 53.1 gr
Pressure: 45,500 CUP
123gr 3.0 gr VV310 1,000 fps CCI LR guest
Subsonic Email author: hannu.helin
See all of hannu.helin's loads
125gr SP
51.0 gr Win 748 3,060 fps Winchester Suggested starting load: 45.9 gr
Pressure: 46,000 CUP125gr SP 57.8 gr Win 760 3,125 fps Winchester
30-06 Springfield
_xclick johnk@handloads
Website donation
All
30-06 Springfield rif le
Suggested starting load: 52.0 gr
Pressure: 45,000 CUP
125gr JHP
61.0 gr Reloder 19 Unknown 3.300" Fed LP guest Very accurate through my Remington Model 700 BDL. 5/8" 5 shot 100 yd group.
Email author: sreece444See all of sreece444's loads
125gr BTHP
59.5 gr H414 3,243 fps 3.330" CCI LR guest Load shot from 1903 springfield with 26" Benchmark barrel, velocity is avg.from 20rd string, with WIN cases and CCI BR-2 primers consistantly shoots 1/2" groups at 100yrds.
Email author: norhernpeaksSee all of norhernpeaks's loads
125gr SP
57.0 gr 4350 Unknown CCI LR guest Knocks em, down
Email author: skeets63See all of skeets63's loads
125gr BTHP
52.0 gr imr 4895 3,028 fps CCI SP guest
Email author: See all of jiskata's loads
125gr BTHP
57.5 gr VARGET 2,957 fps CCI LR guest 14" LONE EAGLE PISTOL SHOOTS .75" @100 YRDS 2SHOTS 1 HOLE BK
150gr SP
48.0 gr Win 748 2,810 fps Winchester Suggested starting load: 43.2 gr
Pressure: 46,000 CUP
150gr SP
54.0 gr Win 760 2,900 fps Winchester Suggested starting load: 48.6 gr
Pressure: 48,000 CUP
150gr FS
55.1 gr Win 760 2,810 fps Winchester Suggested starting load: 49.6 gr
Pressure: 52,100 PSI
150gr JSP 61.5 gr H4831 2,800 fps CCI LR guest
1/2" group @ 100 yds. Weatherby Vanguard Rifle, Nosler Ballistic Tips
150gr JSP 51.0 gr IMR 4895 2,965 fps 3.20" CCI LR guest
Rem 700 BDL, R-P cases,2.484",ES=7.99, SD=5.65
150gr JSP 53.5 gr wc846 2,845 fps CCI LRM guest
max work up, powders vary. Ruger 77 22" WW brass, win power point. Temp 80 degrees
150gr JSP 51.5 gr RL-15 2,867 fps CCI LR guest
22" Rem pump rifle.Temp 90 degrees
150gr SP
48.0 gr hodgdons 4895 Unknown 3.2"" CCI LR guest remington cases, 150g psp corelokt, remington 710 5 rounds in same hole @ 50 yards. Friend has same rifle and takes 50.0 grains of same powder to mimic results. Guns were made @ factory one after the other. "go figure"
Email author: GlockblawblawSee all of Glockblawblaw's loads
150gr
46.0 gr H4895 2,600 fps 3.18" LR guest I built this load for the M1 Garand. Hodgdon or IMR 4895 have pretty much the same burn rate and were developed for the M1. This load is very accurate and works the action of the rifle just fine. My main concern here was not over power the op rod and get good performance. I used LR #34 Nato primers.
Email author: See all of dkb654's loads
150gr BTHP
60.0 gr H4831 Unknown Fed LRM guest Bullet is Nosler 150gr. Ballistic Tip. Seat bullet .005-.010 from lands. Produces less than 1/4 groups at 100yds and 3/4 groups at 200yds.
Email author: kdbowenSee all of kdbowen's loads
150gr JSP
51.6 gr IMR-4064 2,942 fps 3.32" CCI LR guest Rifle FN Mauser 24" bbl, same load shoots Horn 150 gr SST, Horn BT and Speer Hot core, All groups less than 1".
Email author: rhaendel1030See all of rhaendel1030's loads
150gr BTHP
57.5 gr imr 4350 2,860 fps CCI LR guest A good all around load. I’ve used it in a Savage 110 and a Remington 742 and it has performed well.
150gr JSP 55.7 gr H380 Unknown Win LR guest
Groups average .75 inches at 100 yards from sand bag rest. Best group was .6 with outdoor temperature at 82F and humidity at 65%. Slight breeze of < 5 mph.
150gr SP 59.0 gr vihtavuori 550 Unknown CCI SP guest
150gr SP 53.0 gr IMR 4064 Unknown LP guest
Rem 9 1/2 Large Primer, Norma brass. Sierra Game King Boat tails, Winchester Model 70 22 inch barrel. Poison on PA deer.
150gr BTHP
59.0 gr H380 2,956 fps CCI LRM guest
150gr BTHP
51.5 gr 4064 3,000 fps 3.2" CCI LR guest This load gives me excellent accuracy in my model 700 velocity in my mark x mauser with 26" bbl is right at 3000 no pressure signs great accuracy 1.0 in at 100yds some 5 shot strings are less I cant seat the bullet out far enough to touch the rifling The bullet is too short so I just seat it as if it was A factory round
Email author: merrittperSee all of merrittper's loads
150gr SP
63.0 gr Reloader-19 2,998 fps Fed LR guest 2998 ft/sec. measured 12 feet from the muzzle. This 150 grain is the Barnes X flat-base all coppper bullet. The Alliant website lists this load and it is the maximum charge noted there. My Brno action built in 1938 was rebarrelled by Century Arms in .30-06 SPRG. and sold here in Canada. It is a great rifle/cartridge for big-game hunting here in Alberta.
150gr JSP
61.0 gr R-19 2,950 fps 3.40" CCI LR guest Rifle is Win. M-70, bullet is Sierra Pro Hunter, primer is CCI-BR2,Case is rem. this is a very accurate 3 shots under 1 in. load close to max.
Email author: See all of johnl7's loads
150gr BTHP
60.0 gr imr-4350 2,950 fps 3.340" Win LR guest average .75 groups @ 100 yards using hornady sst bullets out of my rem model 710.
Email author: paparoy523See all of paparoy523's loads
150gr JSP 48.0 gr imr 4895 2,850 fps na" Fed LR guest
rifle is a 700 rem. 26in. king barrel. this load is very acc. .4 at 100yds. and 1.2 at 300.this was a forming load.
150gr SP
54.0 gr imr4350 Unknown LR guest
Email author: peter.coolsSee all of peter.cools's loads
165gr Sierra
56.0 gr 4350 2,890 fps F210M guest I have used this load for years. If I do my part, it will shoot 1" or less at 100 yards anytime, hot or cold...
Email author: Missouri_MuleSee all of Missouri_Mule's loads
165gr FS
54.6 gr Win 760 2,690 fps Winchester Suggested starting load: 49.1 gr
Pressure: 53,300 PSI
165gr PG
60.0 gr WXR 2,755 fps Winchester Suggested starting load: 54.0 gr
Pressure: 51,300 PSI165gr spbt
57.5 gr imr 4350 2,900 fps 3.290" cci 200 guest sub .75 @ 100
165gr nosler p
57.4 gr imr 4350 2,940 fps 3.375" cci 200 guest Two rifles in this caliber I own shoot this load amazingly well. No pressure signs. Groups in both rifles are about 1/2" - 3/4" if I do my part.
Email author: davidwalrodSee all of davidwalrod's loads
165gr nosler p
57.4 gr imr 4350 2,940 fps 3.375" cci 200 guest Two rifles in this caliber I own shoot this load amazingly well. No pressure signs. Groups in both rifles are about 1/2" - 3/4" if I do my part.
165gr Sie
59.5 gr H4350 2,830 fps 3.428" CCI BR2 guest Reformed .270 case to get case lenght I wanted. Necks turned to .012 inch.5 shots @ 100 yds=.247 inch. SD=5.1 fps. MAD=4.3 fps. Actual chamber length=2.517 inch
Email author: BigBob3006See all of BigBob3006's loads
165gr nosler
57.0 gr IMR 4350 2,808 fps cci guest
165gr speer
54.0 gr imr 4350 Unknown magmuns guest
165gr FMJ-BT
57.5 gr H-4350 2,750 fps Win LR guest Hornady SST bullet. Load to .01 off lands. 1/2MOA out of Browning A-Bolt.
165gr JSP 57.0 gr IMR 4350 2,850 fps 3.330" Fed LR guest
VERY ACC
165gr BTHP
60.0 gr imr4350 3,100 fps Win LR guest nosler ballistic tip
Email author: See all of irish57's loads
165gr
47.0 gr IMR 4895 2,700 fps CCI LR guest I am not shooting this so much any more -- my buddy buys Korean surplus, but that’s the best M1 Garand load I ever used. Did not hurt the rifle, and had nice 5" groups at 200 yds (> 55 years old at the time)
Email author: See all of pjpitt's loads
165gr SP
55.5 gr imr4350 Unknown 3.24" CCI LR guest concerned about oalof3.24 Nosl B/T has oal 3.34.What effect does the diff oal have on the bullet jump etc.
Email author: bobbyz193300See all of bobbyz193300's loads
165gr BTHP
56.0 gr W760 Unknown 3.320" Win LR guest Using Nosler Balistic Tips, my gun with heavy factory trigger will shoot under 1" with this load. I got much better results with W760 powder than I did with the IMR4350 and the same bullets.
165gr BTHP
56.0 gr H414 2,850 fps Win LRM guest Tremendous deer load with a Nosler 165gr Ballistic Tip. Flat shooting. Very, very accurate. Great expansion, but enough bullet to penetrate front shoulder on quartering shots. On a large deer, the 150 gr ballistic tip might be questionable on that shot, but the 165 punches right through.
165gr BTHP
53.0 gr imr 4350 Unknown CCI LR guest sub moa from savage 116 one hole at 100yds
165gr BTHP
48.5 gr IMR 4064 2,650 fps CCI LR guest Great Garand load. Use Sierra 165 grain BTHP to emulate Sierra match HP in hunting load.
Email author: shorthairSee all of shorthair's loads
165gr BTHP
61.0 gr RL 19 Unknown na" Fed LR guest load this in a number of rifles. shoots very good. groups .5 to 1in.
165gr JSP
50.0 gr IMR 4064 2,700 fps 3.40" CCI LR guest This load shoots well out of 3-06’s I have bullet is Sierra GameKing, primer is CCI- BR2, case is Rem. In all of my 06’s this shoots less than 1 in. 3 shots @100yds.
Email author: See all of johnl7's loads
165gr JSP
46.0 gr RL 15 Unknown 3.24" CCI LR guest This is an excellent load for the M1 Garand and the Springfield 1903. I substituted 165 Hornady SST bullet for a hunting load if you enjoy hunting with vintage military arms. The ballistics will correspond with the sights of both weapons. I shot a 1 inch group with this load at 100 yards with a 1903a3. The garand shoots equally well.
Email author: nwmogunsSee all of nwmoguns's loads
165gr JSP 59.5 gr H4350 2,900 fps CCI LRM guest This is a load I have used extensively with a little wiggling. Start a grain and half below this and work up. In a 24"
shilen barrel throated for the 165 Nosler .015 off lands this load does 2915 fps all year round, thanks to Hodgdons "extreme" powder.
Email author: bridgepointartisanSee all of bridgepointartisan's loads
165gr BTHP
59.0 gr IMR 4350 3,003 fps 2.980" CCI LR guest I shot this load for the first time this week over my crono. My 2000 IMR reloaders manual has a 60 grain load, but I cut it back to start. I was comparing the Hornady Light Mag 165 gr SST load to this one. I am shooting 165 gr. Siera Game King BTHP’s. This Hornady’s had vivid signs of pressure, like flat primers (very flat). The IMR 4350 load showed none whatsoever. It (the 4350 load)also averaged 17 f.p.s. faster 5 shot average velocity. I got 1/2"-3/4" groups at 200 yds! I shoot a Savage Model 110 by the way.
Email author: See all of weeks's loads
165gr SP 50.0 gr IMR 4064 Unknown 3.325" CCI LR guest
Consistent 1" groups @ 100 yds out of my Ruger M77 light weight
165gr JSP
57.0 gr IMR 4350 2,800 fps 3.185" CCI LR guest Remington Core-Lokt bullet crimped at the cannelure with factory crimp die. There isn’t much load data available for the Core-Lokt 165s, so I had to work up. Pressure is pretty light; noticeably less than factory Rem Core-Lokt 165s. Starting load should be 55gr just be on the safe side, as per the IMR data for 165 JSPs. OAL might seem kind of short, but Core-Lokts are kind of blunt, so they don’t seat any deeper than normal. Accuracy is pretty decent for bulk bullets, ~1.5MOA. I could have gone higher with velocity, but even at this speed you’ll get reliable mushrooming out to 400 yards.
Email author: karlmwrightSee all of karlmwright's loads
165gr BTHP
61.5 gr reloader 19 2,800 fps 3.300" Fed LR guest The bullet is actually a Barnes X flat base. The barrel is 24" hart match grade SS, with a saami minimum chamber.
Email author: c.frank47See all of c.frank47's loads
168gr HP
52.5 gr Win 760 2,665 fps Winchester Suggested starting load: 47.3 gr
Pressure: 47,000 CUP
168gr BTHP
47.0 gr Vihtavuori N140 Unknown 3.299" LR guest Outstanding performance in my U.S. Model of 1917 (P-17).
Email author: daybreak619See all of daybreak619's loads
168gr BTHP
45.5 gr AA4350 2,700 fps CCI LR guest This losd is seated .002 from lands in a winchester mod 70 classic stainless with boss set for 150 gr., can cover 5 shot group with dime at 100 yds.
170gr 25.0 gr Reloader 7 1,823 fps 3.013" CCI LR guest Win cases,CCI primer,2.491 case length, ES=151.4 SD=41.6
170gr 25.0 gr Reloader 7 1,823 fps 3.013" CCI LR guest Rem 700 BDL, ES=151.4 SD=41.6
173gr fmjbt
53.0 gr 4350 Unknown 3.335" winchester guest
180gr SPBT
60.0 gr H4831 2,710 fps 3.3" WLR guest From Hodgon 2000 manual
180gr PG
60.0 gr WXR 2,675 fps Winchester Suggested starting load: 54.0 gr
Pressure: 51,500 PSI
180gr FS
59.0 gr WXR 2,670 fps Winchester Suggested starting load: 53.1 gr
Pressure: 52,000 PSI
180gr FMJBT
44.0 gr Win 748 2,530 fps Winchester Suggested starting load: 39.6 gr
Pressure: 47,000 CUP
180gr SP
45.0 gr Win 748 2,540 fps Winchester Suggested starting load: 40.5 gr
Pressure: 48,500 CUP
180gr FMJBT
52.5 gr Win 760 2,700 fps Winchester Suggested starting load: 47.3 gr
Pressure: 48,500 CUP
180gr SP
53.0 gr Win 760 2,725 fps Winchester Suggested starting load: 47.7 gr
Pressure: 51,000 CUP
180gr FS
51.4 gr Win 760 2,625 fps Winchester Suggested starting load: 46.3 gr
Pressure: 57,100 PSI
180gr JSP 61.0 gr RL-22 2,670 fps CCI LR guest
22" Ruger. Temp 85 degrees.core-lokt bullet. Win brass
180gr BTHP
58.5 gr RL-19 2,700 fps 3.245" Win LR guest The bullet used is Hornady 180 gr. SPBT. .005 from lands and grooves. Remington cases trimmed, flash hole deburred, primer pocket uinformed. This load has produced consistent .407" three round groups at 100m. Good shooting!!
Email author: handloader1See all of handloader1's loads
180gr BTHP
59.0 gr H4831 Unknown Fed LRM guest The bullet is a Sierra 180 gr Boat Tail Spire Point (GameKing). Also seat bullet .005 to.010 from lands. Results are quarter inch groups @100yds. Velocity around 2800fps
Email author: kdbowenSee all of kdbowen's loads
180gr JSP
56.0 gr IMR-4350 2,742 fps 3.32" CCI LR guest Rifle FN mauser 24"BBL, Groups 0.75" Bullet is Nosler partition.
Email author: rhaendel1030See all of rhaendel1030's loads
180gr SP 62.8 gr Accurate MagPro 2,720 fps CCI LR guest
Win. brass, Sierra SPBT Game King, Win Mod 70 synthetic stock, 24 in. bbl. Used on elk, deer, wild hogs; very effective. 3/4 in. groups @ 100 yards.
180gr BTHP
60.0 gr Hodgdon H4831
SC 2,581 fps 3.250" CCI LR guest
The bullet is a Hornady BTSP #3072. I use this round is a Remington 700, it works well for deer out to 225 yards. Email author:
See all of miket's loads
180gr JSP
55.5 gr IMR 4350 2,780 fps 3.280" Fed LR guest I like to use the Nosler partition for this load It is accurate and very lethel on big game at this speed no problem with pressure --in my guns.you may want to work up to this load Its quite powerful I like Winchester brass It seems to have more volume and can take this load with less presure but I believe this load is safe in any normal gun
Email author: merrittperSee all of merrittper's loads
180gr JSP
57.0 gr IMR 4350 2,800 fps Fed LR guest This maximum charge of IMR 4350 using the Remington Core-Loct bullet has given me the most accurate load I’ve developed for my Brno .30-06 SPRG. The ES is 4 f/sec., from 2798 to 2802 f/sec with an average of 2800 f/sec using a five shot group from the rifle’s 23.5 inch barrel. This consistency has given me groups small enought to place a $0.25 quarter over at 100 yds. -- How does the Remington bullet preform on big game?
Email author: rocky6pointSee all of rocky6point's loads
180gr SP
57.0 gr IMR 4350 2,757 fps 3.35" CCI LR guest Remington 700 BDL LOAD!!! - Bullet - Sierra Pro-Hunter Spitzer (2150); Primer CCI-200; Brass - Federal (FC); SDEV - 9.9 fps; MOA 0.85" - Good Luck - Dogeye
Email author: See all of dogeye's loads
180gr BTHP
59.0 gr imr-4350 2,880 fps 3.340" Win LR guest average 1" groups @ 100 yards out of my Rem model 710 using sierra sbt bullet.
Email author: paparoy523See all of paparoy523's loads
180gr BTHP
57.0 gr imr 4831 2,902 fps na" Fed LR guest rifle is a 700 rem. 26in. king barrel. very acc. .75 @ 100yds. cases fed. match. i shot 58 and 59grns. but the primer pockets alittle loose. win. brass mite be o.k.
Admin Note: IMR max load 56.8gr and compressed
190gr HPBT
56.6 gr WXR 2,600 fps Winchester Suggested starting load: 50.9 gr
Pressure: 53,400 PSI
190gr HPBT
52.0 gr Win 760 2,605 fps Winchester Suggested starting load: 46.8 gr
Pressure: 47,500 CUP
190gr BTHP
62.0 gr RL22 2,903 fps 3.326" Fed LR guest 190gr Sierra Matchking, moly-coated. 26" Douglas 1-10 twist bbl. .5moa accurate.
Email author: montanamarineSee all of montanamarine's loads
190gr BTHP
60.4 gr RL22 2,878 fps 3.303" Fed LR guest The brass is Lapua and the bullet is the 190 grain Sierra MatchKing. I use this load to shoot at 1k, and have shot 3 shot groups of .2 at 100 yards with it.
Email author: See all of ussr's loads
200gr
55.3 gr WXR 2,540 fps Winchester Suggested starting load: 49.8 gr
Pressure: 55,300 PSI
200gr SP
49.0 gr Win 760 2,470 fps Winchester Suggested starting load: 44.1 gr
Pressure: 46,000 CUP
220gr SP
49.0 gr Win 760 2,370 fps Winchester Suggested starting load: 44.1 gr
Pressure: 48,000 CUP
Handload
Users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any data, whether or not occasioned by publisher's negligence or based on strict liability or principles of indemnity or contribution. Handloads.Com neither assumes nor authorizes any person to assume for it any liability in connection with the use of any data.
It took 2.04 seconds to build this page
Questions or comments? | Donate to Handloads.Com | Site Map Copyright © 2000-2008