NEW CONSTRUCTION REPIPE PROGRAMWATER HEATER SOLUTION

F1960F1960F1960Quality, Full Flow PEX Fitting SystemQuality, Full Flow PEX Fitting SystemQuality, Full Flow PEX Fitting System

WARRANTY CERTIFICATEIWISS ASTM PEX PIPE TOOLS

Product model number:

Purchase channel:

Order number:

Print name:

E-mail:

Phone:

Purchase date:

Warranty claim date:

Project type:(household, industrial)

Project address:

AST

M

IWISS PEX - A EXPANSION RING INSTALLATIONTOOL

Application

Capacity

Weight

I W I S S T O O L S

ASTM F1960

ASTM F1960 specification covers cold expansion fittings and

cross-linked (PEX) reinforcing rings for use with cross-linked

polyethylene (PEX) plastic tubing in specific nominal diameters.

These fittings are intended for use in residential and commercial,

hot and cold, potable water distribution systems as well as sealed

central heating, including under-floor-heating systems. The PEX

reinforcing rings shall conform to the required density, degree of

cross-linking, and stabilizer migration resistance.

F1960 Installation

1. Cut tube at 90-degrees. Do not crush OD of tubing with cutters.Hint: Slightly rotate cutter during blade engagement.

2. Install PEX sleeve onto OD of tubing.

3. Using tube expander, expand sleeve fully. Repeat expansions, rotating expander 1/8-turn between expansions.

5. The installation is complete with a visibly secure connection. Remove defective connections. Test completed joint.

F1960 Application Problems

3/8" Jaw(Optional) 1/2" Jaw 3/4" Jaw 1" Jaw

ASTM F1960

3/8",1/2",3/4",1"

Material

ASTM F1960

1/2",3/4",1"

Galvanized Aluminum

Part No.

Asin

IWS-1960 IWS-1960MC

B00MP4O1QI B078SM7KRB

Length

JAWS

0.74kg /1.63 lb0.70kg /1.50 lb

364 mm/14.3 inch364 mm/14.3 inch

There is virtually no maintenance required. However,it's good practice to keep indenter tipsfree of residual deposits

and other debris.

We strongly recommend that you:

1. Clean tool to remove debris regularly.

2. Don’t spray oil into tool to lubricate.

3. Don't attempt to disassemble tool or make repairs.

Care of tool

Improperly inserted fitting

Damagedsealing barbwill not sealproperly

SPECS

Tubing : PEX-A

Fitting: Expansion Ring

Application: ASTM F1960

Type: Tool

Bad

Good

Damaged, cut or grooved sealing barb.

Fitting not inserted completely into expanded tube and ring. Ring not fully covering PEX tubing.

Expansion did not rotate between multiple expansions, leaving a groove or leak path past the fitting barb.