More Ways to

Part No. Description Pitch Sale Price

VA-02107105 3ER-AG60 VRX (16ga) 48-8 TPI $23.28 VA-02107106 3ER-G60 VRX (16ga) 14-8 TPI 23.28 VA-02107447 3EL-AG60 VRX (16ga) 48-8 TPI 23.28 VA-02107196 3IR-AG60 VRX (16ga) 48-8 TPI 23.28 VA-02107072 3IR-G60 VRX (16ga) 14-8 TPI 23.28 VA-02107453 3IL-AG60 VRX (16ga) 48-8 TPI 23.28

The New VRX grade from Vardex is a multi-purpose Premium grade suitable for machining Steel, Hardened Steel up to 55 HRC, Stainless Steel, High Temperature Alloys and Non-Ferrous metals at low and high cutting speeds.

Cutting Tool Lubricant - Type 11-UBUltraLubeTM High Performance - High ViscositySuper concentrated no run formula. Clings to vertical surfaces for continual lubrication. Rich gold color and thick consistency gives a quality appearance not available with thin runny fluids. Virtually smoke free in even the most heat prone applications. Contains no ozone depleting substances. This fluid will extend tool life and yield a super smooth machined finish.

Part No. Size Qty. Price (ea.) TT-96060 4 OZ. 1 $4.39 TT-96070 16 OZ. 1 14.19

Case Bottles Weight Part No. Per Case Per Case Price (cs.) TT-96060C 48 - 4 OZ. 18 LbS./8.2 KGS. $205.50 TT-96070C 12 - 16 OZ. 15 LbS./6.8 KGS. 165.00

These are designed for slotting, drilling, pocketing and general operation. Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.

TiAIN Coated, 2 Flute Regular Length Solid Carbide End Mills

EDP No. Mill Shank Length Overall Coated Diameter Diameter of Cut Length Price 01554TE 1/16 1/8 3/16 1-1/2 $8.83 01558TE 1/8 1/8 1/2 1-1/2 8.56 01565TE 3/16 3/16 5/8 2 10.87 01573TE 1/4 1/4 3/4 2-1/2 11.78 01584TE 3/8 3/8 1 2-1/2 21.25 01593TE 1/2 1/2 1 3 33.80 01595TE 5/8 5/8 1 1/4 3-1/2 68.63 01598TE 3/4 3/4 1 1/2 4 87.40 01600TE 1 1 1 1/2 4 173.18

Other sizes available. Please enquire

SAVE!

BRT-TOOLS

Tool Holder Locking Device

Taper Order No. of Tool Holder Outsize (mm) Weight (kg) Price bRT-106C40LD CAT40 205 x 98.5 x 128 1 1/2 $99.00 bRT-106C50LD CAT50 275 x 150 x 198 1 1/2 149.00

Drill Shank Flute Overall EDP Dia. Dia. Length Length No. Size D1 D2 L1 L2 Price D1C90079 1 3/64 1/8 1/16 1-1/2 $2.82 D1C90080 2 1/16 3/16 5/64 1-3/4 2.93 D1C90081 3 3/32 1/4 1/8 2 3.78 D1C90082 4 1/8 5/16 5/32 2-1/4 4.57 D1C90083 5 3/16 7/16 1/4 2-1/2 5.64 D1C90084 6 7/32 1/2 7/32 3 8.23

D1C90 Series - Regular Length (60˚) unit: inch

HSS(M2) Center Drill

Regular Length - EM021 Series EDP No. Mill Shank Length Overall Coated Diameter Diameter of Cut Length Price 07554TE 1/16 1/8 3/16 1-1/2 $8.83 07558TE 1/8 1/8 1/2 1-1/2 8.56 07565TE 3/16 3/16 5/8 2 10.87 07573TE 1/4 1/4 3/4 2-1/2 11.78 07579TE 5/16 5/16 13/16 2-1/2 18.63 07584TE 3/8 3/8 1 2-1/2 21.25 07593TE 1/2 1/2 1 3 33.80 07595TE 5/8 5/8 1 1/4 3-1/2 69.65 07598TE 3/4 3/4 1 1/2 4 87.40 07600TE 1 1 1 1/2 4 173.18

4 Flute - Regular Length Solid Carbide, TiAIN Coated

Possible for high-speed cutting, suitable for high efficiency machining for hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.

Other sizes available. Please enquire

MagBases

Pictured: HT4300

• New Articulated Arm• Five Axis Holder• Central Locking Mechanism• Powerful On/Off Magnetic base• Holds 6mm, 8mm, 3/8” & Dovetail• Fast and Easy Set-up• Instant Fixation at any Position

Holder Arm Length Bottom Bottom Bottom Top Magnet Order No. Thread Weight Arm Arm Total Force Dimension D Kg L1 L2 L1+L2+L3 N W L H Price HT2100 Ext. M5 0.430 80 50 201 320 30 40 35 $110.00 HT3200 Ext. M8 1.245 110 80 261 800 50 60 55 149.00 HT4300 Ext. M8 1.420 140 110 321 800 50 60 55 189.00

SAVE!

0-1” Dial Indicator0-100 Grad0.001” Reading

Part # - 6605-4010$21.75

Std Mag base130 Lb Pull

Part # - 625-0301$21.75

150 mm / 6”0.01 mm / .0005”Large WindowLCDMetal Housing2 batteries

Part # - 101-0155$49.00

$35.00

Package Price #1Mag Base & Indicator

$89.00

Package Price #2All 3 of the above

Most universal set. Accepts all “b” types blades.Includes:• Blade Holder EL0100GT which telescopes from 6-125mm.

Holds all “b” (Ø2.6mm) blades• One each GT-B10 and GT-B20 HSS blade inside the Handle.• Universal Handle EL1000GT which can store spare blades.

GT “B” Set

Part No. Price EL1100GT $10.68 Part No. Price

EL1200GT $12.29

Similar to the GT “b set but takes the heavy-duty “E” (Ø3.2mm) blades. Includes:• Blade Holder EL0200GT which telescopes from 6-125mm.

Holds all “E” (3.2mm) blades• One each GT-E100, GT-E200, GT-E300 blade.• Universal Handle EL1000GT which can store spare blades.

GT “E” Set

manufactured by NOGA • interchangeable with Shaviv manufactured by NOGA • interchangeable with Shaviv

BRT-TOOLS

$229.00

(While Supplies Last)

CAT 40ER COLLET CHUCK • 20,000 RPM

INFO PART NO. TAPER DESCRIPTION COLLET SIZE gAgE -L bRT-01033250 CAT 40 Collet Chuck ER32 5”

PART NO. DESCRIPTION SIZE bRT-10113200 Collet Set ER32 - 18 Pcs.

Boring Bar Kits - Coolant Thru

Coolant Thru Boring Bar Set 4 PCS - 5/16”, 3/8”, 1/2”, 5/8”CCMT 21.5_ Case included

Price W/O inserts .................................. $205.30

Price with 10 inserts (#71934) ........... $265.30

• Safe and easy-to-use • Eliminates sump odors caused by hydrogen sulfide bacterial emissions • Most effective way to control sump odor and correct for low pH • Contains no formaldehyde or harmful chemicals• Safer and more economical than biocides• Works best when used with Zebra Oxygenator

• Prism aperture lets in lots of light • Diamond-knurled sleeve for good grip • Carrying case with sampler included • Comfortable eyepiece with adjustable focus for easy reading • Auto temperature compensation for shop with varying temperature

Kit Description Model # Price 7 Pc Handyman’s Hole Saw Kit 9595 $39.90 9 Pc Plumber’s Hole Saw Kit 9592 64.90 9 Pc Electrician’s Hole Saw Kit 9593 67.90 13 Pc Journeyman’s Hole Saw Kit 9596 87.00 20 Pc Industrial Hole Saw Kit 9599 218.00

Bi-Metal Hole Saw Kits

Refractometer & Odor Control Tablets

$99.00

get (1) Refractometer

& (1) Tube of Pucks for

TM

Kit #1 - 4PC Kit #2 - 3PCCoolant Thru Boring Bar Set 3 PCS - 1/2”, 5/8”, 3/4”CCMT 32.5_ Case included

Price W/O inserts .................................. $185.30

Price with 10 inserts (#71936) ........... $246.65

Printed May, 2017

DISTRIBUTED By:

Tap Sets - Hand Tap Sets (in case),

Taper, Plug & Bottoming Style

Part # Size Reg. Price Sale PriceT7316249 6-32 UNC $14.52 $10.79T7316289 8-32 UNC 14.52 10.79T7316329 10-24 UNC 14.52 10.79T7316369 12-24 UNC 15.61 11.59T7316409 1/4-20 UNC 14.07 10.45T7316449 5/16-18 UNC 16.64 12.29T7316489 3/8-16 UNC 20.05 14.90T7316529 7/16-14 UNC 33.22 24.70T7316569 1/2-13 UNC 37.65 27.95

Part # Size Reg. Price Sale PriceT7316269 6-40 UNC $14.52 $10.79T7316309 8-36 UNC 14.52 10.79T7316349 10-32 UNC 14.52 10.79T7316389 12-28 UNC 15.61 11.59T7316429 1/4-28 UNC 14.07 10.45

T7316469 5/16-24 UNC 16.64 12.29 T7316509 3/8-24 UNC 20.05 14.90

T7316549 7/16-20 UNC 33.22 24.70T7316589 1/2-20 UNC 37.65 27.95

APKT160408 PDTR YG602PVD Coated for Great Performance on all Steels and SS

PerformanceGuaranteed $7.29 EA

(Packs of 10)

File Sets9-Piece File SetRecommended for industrial use, these tools have an exceptional filing capacity. Comes in a heavy duty black canvas pouch. Quality in hardness and regularity. Efficient bite to the edges. All files come pre-assembled with Ergo handles. Set includes:6” Double Extra Slim Taper10” Mill bastard Cut8” Half Round Wood Rasp bastard Cut10” Half Round bastard Cut8” Flat bastard Cut10” Flat bastard Cut10” Round bastard Cut12” Mill bastard Cut6” Slim Taper

Set No. PriceGRO324809 $84.99

• Priced per Set• Taper, Plug & Bottoming Style• Packaged in a Handy Case

Cutter Dia. Shank Inserts PriceREC15-200-CN475 2.00” 0.75” 3 $199.00REC15-200-CN410 2.00” 1.00” 3 199.00REC15-200-CN4R8 2.00” R8 3 259.00

Face Mill Dia. Shank Inserts PriceREC15A-300-CN4 3.00” 1.00” AH 4 $449.00REC15A-400-CN4 4.00” 1.50” AH 5 575.00

15˚ Indexable CNMG Recycle Milling CutterAfter the cutting edges are used on your turning toolholder, do not throw the insert away. It can be used in these milling cutters to utilize two more cutting edges that were not used in your lathe work.

15°

F

C

HH1

15°

d

F

H

C

d

F

H

C

d

REC15A-000-CN4-000 REC15-200-CN4-000 REC15-200-CN4-R8

D DD1 D1

DD1

15°

15°

F

C

HH1

15°

d

F

H

C

d

F

H

C

d

REC15A-000-CN4-000 REC15-200-CN4-000 REC15-200-CN4-R8

D DD1 D1

DD1

15°

Every Cutter below uses CNMg 432 Inserts

SteelmansSteelmans

No. 10A Standard SetSame as No. 10 Set, but for sixteenth-sized bores. 4 broaches and 9 bushings = 18 keyway combinations.

Keyway Broach Bushing DiametersSizes Style (bore sizes)1/8 b 9/16, 11/16, 13/163/16 b 9/16, 11/16, 13/16

1/4 C 15/16, 1-1/16, 1-3/16, 1-5/16, 3/8 C 1-7/16, 1-9/16

Part No. Price0030 $496.00Collared bushings Only

No. 10-10A Combination SetCombines 10 and 10A sets. Features all bore sizes in 1/16 inch increments for keyways 1/8 to 3/8 inches. 4 broaches and 18 bushings = 36 keyway combinations.

Keyway Broach Bushing DiametersSizes Style (bore sizes)1/8 b 1/2, 9/16, 5/8, 11/163/16 b 3/4, 13/16, 7/81/4 C 15/16, 1-1/16, 1-1/8, 1-3/163/8 C 1-1/4, 1-5/16, 1-3/8, 1-7/16,

1-1/2, 1-9/16Part No. Price0075 $638.00Collared bushings Only

APKT 160408 Inserts

Broach Sets

EMP01-.75” Dia. Weldon Shank APKT Style Cutter (.75” Shank) with (10) APKT11T308-PM YBG202 Inserts

APKT Tool & InsertsSAV

E!

$149.00for the Tool & Inserts

#207-1655 Broadway St.Port Coquitlam, BC V3C 3M7

Ph: 604-464-0223Fax: 604-552-4026

sales@daytontoolltd.ca