lv2009
TRANSCRIPT
Head Office/Factory :Jl. Gatot Subroto Km 7,8 Kel Pasir Jaya, Kec. Jati Uwung, Tangerang 15135-IndonesiaPhone : (62-21) 5922404, 5928066 (Hunting) Fax. : (62-21) 59301979, 5922576, 5901469
c Copyright Sumi Indo Kabel 2009
All rights reserved. This catalogue is the copyright work of PT. Sumi Indo Kabel Tbk. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,in any form or by means, electronic, mechanical, photocopying, recording or otherwise, without prior permission of PT. Sumi Indo Kabel.
All information contained in this catalogue is believed to be accurate at the time issue. PT. Sumi Indo Kabel reserve the right to change information or specification at any timein the light of technical developments or revisions.
Issue : 3 Date: June 2009
Section 1 - Contents & Information
Low Voltage Catalogue Index Page Number
SECTION 1 - Contents & InformationIndex Page 11
Company Profile of PT. SUMI INDO KABEL Tbk 2
Cable Specification 3
SECTION 2 - PVC Insulated CablesUnarmoured Cables
450/750 Volts PVC Insulated Cables (Cu/PVC, NYA) 5
450/750 Volts PVC Insulated Cables (Flexible Cu/PVC, NYAF) 6
300/500 Volts PVC Insulated and PVC Sheathed Cables (PVC/PVC, NYM) 8
300/500 Volts PVC Insulated and PVC Sheathed Cables (Flexible PVC/PVC, NYMHY) 10
450/750 Volts PVC Insulated and PVC Sheathed Cables (Flexible PVC/PVC, NYYHY) 11
600/1000 Volts PVC Insulated and PVC Sheathed Cables (PVC/PVC, NYY) 18
600/1000 Volts PVC Insulated, Copper Tape Shielded and PVC Sheathed Cables (PVC/PVC-S, NYSY) 30
Armoured Cables
600/1000 Volts PVC Insulated, Steel Wire Armoured and PVC Sheathed Cables (PVC/SWA/PVC, NYRY) 35
600/1000 Volts PVC Insulated, Flat Steel Wire Armoured and PVC Sheathed Cables (PVC/FSWA/PVC, NYFGbY) 41
600/1000 Volts PVC Insulated, Double Steel Tape Armoured and PVC Sheathed Cables (PVC/DSTA/PVC, NYBY) 46
SECTION 3 - XLPE Insulated CablesUnarmoured Cables
600/1000 Volts XLPE Insulated and PVC Sheathed Cables (XLPE/PVC, N2XY) 52
600/1000 Volts XLPE Insulated, Copper Tape Shielded and PVC Sheathed Cables (XLPE/PVC-S, N2XSY) 62
Armoured Cables
600/1000 Volts XLPE Insulated, Steel Wire Armoured and PVC Sheathed Cables (XLPE/SWA/PVC, N2XRY) 67
600/1000 Volts XLPE Insulated, Flat Steel Wire Armoured and PVC Sheathed Cables (XLPE/FSWA/PVC, N2XFGbY) 73
600/1000 Volts XLPE Insulated, Double Steel Tape Armoured and PVC Sheathed Cables (XLPE/DSTA/PVC, N2XBY) 78
SECTION 4 - General InformationCurrent Carrying Capacity for XLPE Insulated cable (single core) 83
Current Carrying Capacity for XLPE Insulated cable (multicore) 84
Current Carrying Capacity for PVC Insulated cable (single core) 85
Current Carrying Capacity for PVC Insulated cable (multicore) 86
Correction factor of Curent carrying capacity 87Cable arrangement for Installation purpose 88Explanation of Flame Retardant / Fire Resistant Characteristic 91
Page - 1
Section 1 - Contents & Information
Page - 2
1
Company Profile of PT. Sumi Indo Kabel Tbk
The Company was established on July 23, 1981 with its Head Officeand Factory located in Tangerang, Banten. The Company is engaged in the manufacturing of Power Cable, Telecommunication Cable &Fiber Optic, and Copper Wire.
The Company was listed in the Jakarta and Surabaya Stock Exchangesin 1990. The Company became Foreign Capital Investment (PMA)in 1994, with the participation of Sumitomo Electric Industries, Ltd.,Japan, one of the biggest in cable and wire industries in the world. Thename of Company became PT Sumi Indo Kabel Tbk. since 1999.
The Company received official recognition of its quality managementsystem standard from SGS, certification ISO 9001 : 2000 for its PowerCable & Control Cable, Telephone Cable & Fiber Optic Cable, andCopper Wire Rod in 2002. This was the first recognition in Indonesiafor Electric Cable and Wire industries.
Section 2 - PVC Insulated Cables Unarmoured Cables
450/750 V PVC INSULATED WIRE (Cu/PVC)acc. to IEC 60227
Copper Conductor (Solid) PVC Insulation
Copper Conductor (Stranded) PVC Insulation
Colour of Insulation : Red, White, Black, Green, Brown, Blue, Yellow, Green-yellow
450/750 V PVC INSULATED WIRE (Cu/PVC Flexible)acc. to IEC 60227
Copper Conductor (Flexible) PVC Insulation
Colour of Insulation : Red, White, Black, Green, Brown, Blue, Yellow, Green-yellow
Page - 4
Note : Special application upon request* Available product in accordance to : SPLN or other requirement.* Tin coated Copper conductor.
Section 1 - Contents & Information
1 Scope
2 Conductor
The conductor shall be solid, circular stranded or compacted stranded.
3 Insulation
4 Identification of cores
Number of core Identification of coresSingle core Black (Natural for XLPE insulated)Two cores Red, BlackThree cores Red, Yellow, BlueFour cores Red, Yellow, Blue, BlackFive core or more Black insulation with white numbered code.
5 Cabling and filling
6 Metallic Shielding (if required)The metallic shielding shall consist of either one or more Copper tapes or a concentric layer of copper wires.
7 Inner sheath (armour cable only).
8 Metallic armour
9 Outer sheath
The conductor shall be formed from plain annealed copper or aluminium complying with IEC 60228,ASTM B3 and B8.
The insulation shall be cross-linked polyethylene (XLPE) or Polivinyl chloride (PVC) in accordanceto IEC 60502-1.
The outer sheath shall consist of a thermoplastic compound such as polyvinyl chloride (PVC),polyethylene (PE), halogen free (LSOH), etc in accordance with IEC 60502-1.
Page - 3
The cores of all cables shall be identified by color or numbered printed on the surface of insulation inaccordance with the following sequence or other sequence.
The multi cores shall be laid up together with suitable filler to give the completed cable asubstantially circular cross section and bound with suitable binder tape.
The inner sheath shall consist of extruded thermoplastic compound such as :polyvinyl chloride(PVC), polyethylene (PE),halogen free (LSOH), etc in accordance to IEC 60502-1.
The metallic armour shall consist of single layer of round galvanized steel wire or flat galvanized steel wire and steel tape or double layer of galvanized steel tapes in accordance to IEC 60502-1.The armour of single core cables shall consist of single layer of aluminium wire or double layers ofaluminium tape as non magnetic material.
Cable Specification
These specification apply to material and constructions of cross-linked thermosetting polyethylene(XLPE) or Polivinyl chloride (PVC) insulated wire and cables for rated voltages 0.3/0.5 kV up to0.6/1(1.2) kV accordance to IEC 60502-1, Indonesia Electric Power Company (SPLN)
Section 2 - PVC Insulated CablesUnarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 450/750 V Insulation : PVC Compound type C Operating Temperature Colour Ident. : Red, White, Black, Green, Maximum 70°C
Blue, Yellow, Green-yellow
1.5 1 / 1.38 1.38 0.7 3.0 22 12.1 0.011 2500
1.5 7 / 0.52 1.56 0.7 3.5 23 12.1 0.010 2500
2.5 1 / 1.78 1.78 0.8 4.0 33 7.41 0.010 2500
2.5 7 / 0.67 2.01 0.8 4.0 35 7.41 0.009 2500
4 1 / 2.26 2.26 0.8 4.5 49 4.61 0.0085 2500
4 7 / 0.85 2.55 0.8 4.5 52 4.61 0.0077 2500
6 1 / 2.77 2.77 0.8 5.0 69 3.08 0.0070 2500
6 7 / 1.04 3.12 0.8 5.0 72 3.08 0.0065 2500
10 1 / 3.57 3.57 1.0 6.0 113 1.83 0.0070 2500
10 7 / 1.35 4.05 1.0 6.5 119 1.83 0.0065 2500
16 7 / 1.70 5.10 1.0 7.5 179 1.15 0.0050 2500
25 7 / 2.13 6.39 1.2 9.0 277 0.727 0.0050 2500
35 7 / 2.52 7.56 1.2 10.5 377 0.524 0.0040 2500
50 19 / 1.83 9.15 1.4 12.5 530 0.387 0.0045 2500
70 19 / 2.17 10.85 1.4 14.0 727 0.268 0.0035 2500
95 19 / 2.52 12.60 1.6 16.5 985 0.193 0.0035 2500
120 37 / 2.03 14.21 1.6 18.0 1218 0.153 0.0032 2500
150 37 / 2.27 15.89 1.8 20.0 1522 0.124 0.0032 2500
185 37 / 2.52 17.64 2.0 22.0 1873 0.0991 0.0032 2500
240 61 / 2.26 20.34 2.2 25.5 2465 0.0754 0.0032 2500
300 61 / 2.52 22.68 2.4 28.0 3055 0.0601 0.0030 2500
400 61 / 2.86 25.74 2.6 31.5 3927 0.0470 0.0028 2500
Page - 5
V/5 min
Maximum AC
Test
Voltage
M.km
Thickness
Nominal
Resistance Resistance
wire
Conductor
of
Nominal No./
Diameter
Minimum
Insulation
Cross-
Diameter
of wire
(approx.)
Conductorsection Insulation
Weight
Nominal
Overall
/kmkg/kmmm²
(Approx.)(Approx.)
No./mm
area (approx.)
mmmm mm
450/750 V PVC INSULATED WIRECU/PVC (IEC 60227)
Conductor
at 70°Cat 20°C
of Diameter of
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type C Operating Temperature Colour Ident. : Red, White, Black, Green, Maximum 70°C
Blue, Yellow, Green-yellow
1.5 1.58 0.7 3.5 22 13.30 0.010 2500
2.5 0.26 2.04 0.8 4.0 34 7.98 0.009 2500
4 0.31 2.59 0.8 4.5 50 4.95 0.007 2500
6 0.31 3.46 0.8 5.5 75 3.30 0.006 2500
10 0.41 4.62 1.0 7.0 130 1.91 0.0056 2500
16 0.41 5.66 1.0 8.0 186 1.21 0.0046 2500
25 0.41 7.06 1.2 10.0 286 0.78 0.0044 2500
35 0.41 8.43 1.2 11.0 395 0.554 0.0038 2500
50 0.41 10.07 1.4 13.5 550 0.386 0.0037 2500
70 0.51 11.97 1.4 15.0 760 0.272 0.0032 2500
95 0.51 13.73 1.6 17.5 1008 0.206 0.0032 2500
120 0.51 15.53 1.6 19.5 1270 0.161 0.0029 2500
150 0.51 17.56 1.8 22.0 1605 0.129 0.0029 2500
185 0.51 19.16 2.0 24.0 1914 0.106 0.0029 2500
240 0.51 22.0 2.2 27.0 2491 0.0801 0.0028 2500
Page - 6
Maximum MinimumNominal Nominal
Thickness Overall
section Conductor
Nominal Diameter Insulation
Cross- of of Diameter of Resistance Resistance
Weight Conductor
0.26
at 70°C
area (Approx.) (Approx.)(approx.)
mm mm kg/km /kmmm² mm
(approx.)
Insulation wire at 20°C
mm V/5 minM.km
Conductor AC
Maximum Test
Diameter Voltage
of wire
450/750 V PVC INSULATED WIRECU/PVC-Flexible (IEC 60227)
Section 2 - PVC Insulated Cables Unarmoured Cables
300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (NYM) - IEC 60227 , SPLN 42-2
Conductor PVC Inner coveringPVC Insulation PVC Sheath
300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (NYMHY) - IEC 60227 , SPLN 42-2
ConductorPVC Insulation PVC Sheath
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Tape (manufacturer's option)Conductor PVC Sheath
PVC InsulationFiller (Polyprophylene yarn,or extruded filler up to request)
Page - 7
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 and 2) Uo/U - 300/500 V Insulation : PVC Compound Operating Temperature Inner covering : PVC Compound Maximum 70°C Sheath : PVC Compound type ST2 Colour Ident. : Insulation : Two cores - Red,Black
Three cores - Red,Yellow, Blue Sheath - White
TWO AND THREE CORES
No.
of
Core
-
1.5 1 / 1.38 1.38 0.7 0.4 1.2 9.5 129 12.1
7 / 0.52 1.56 0.7 0.4 1.2 10.0 138 12.1
2.5 1 / 1.78 1.78 0.8 0.4 1.2 11.0 173 7.41
7 / 0.67 2.01 0.8 0.4 1.2 11.0 184 7.41
4 1 / 2.26 2.26 0.8 0.4 1.2 12.0 222 4.61
2 7 / 0.85 2.55 0.8 0.4 1.2 12.5 239 4.61
6 1 / 2.77 2.77 0.8 0.4 1.2 13.0 294 3.08
7 / 1.04 3.12 0.8 0.4 1.2 14.0 313 3.08
10 1 / 3.57 3.57 1.0 0.6 1.4 16.0 453 1.83
7 / 1.35 4.05 1.0 0.6 1.4 17.0 492 1.83
16 7 / 1.70 5.10 1.0 0.6 1.4 19.0 668 1.15
25 7 / 2.13 6.39 1.2 0.8 1.4 23.0 998 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 26.0 1336 0.524
1.5 1 / 1.38 1.38 0.7 0.4 1.2 10.0 150 12.1
7 / 0.52 1.56 0.7 0.4 1.2 10.5 159 12.1
2.5 1 / 1.78 1.78 0.8 0.4 1.2 11.5 205 7.41
7 / 0.67 2.01 0.8 0.4 1.2 12.0 216 7.41
4 1 / 2.26 2.26 0.8 0.4 1.2 12.5 266 4.61
3 7 / 0.85 2.55 0.8 0.4 1.2 13.0 286 4.61
6 1 / 2.77 2.77 0.8 0.4 1.4 14.0 357 3.08
7 / 1.04 3.12 0.8 0.4 1.4 14.5 381 3.08
10 1 / 3.57 3.57 1.0 0.6 1.4 17.0 557 1.83
7 / 1.35 4.05 1.0 0.6 1.4 18.0 600 1.83
16 7 / 1.70 5.10 1.0 0.8 1.4 20.5 849 1.15
25 7 / 2.13 6.39 1.2 0.8 1.6 24.5 1270 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 27.5 1679 0.524
Conductor Nominal Nominal
at 20°C
Conductor
/km
Resistance
Thickness
Sheath
Weightdiameter
cable cable
Maximum
Nominal No./ Diameter Thickness
Cross- Diameter of of
section
Overall
of of
No./mm
(approx.) (approx.)
mm kg/kmmm
area
300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC (NYM) - IEC 60227 , SPLN 42-2
of wire Conductor Insulation
(approx.)
of
mm²
Thickness
of Inner
covering
(approx.)
mm mm
(approx.)
mm
Page - 8
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 and 2) Uo/U - 300/500 V Insulation : PVC Compound Operating Temperature Inner covering : PVC Compound Maximum 70°C Sheath : PVC Compound type ST2 Colour Ident. : Insulation : Four core - Red,Yellow, Blue, Black
Five core - Black with numbering code Sheath - White
FOUR AND FIVE CORES
No.
of
Core
-
1.5 1 / 1.38 1.38 0.7 0.4 1.2 11.0 177 12.1
7 / 0.52 1.56 0.7 0.4 1.2 11.5 189 12.1
2.5 1 / 1.78 1.78 0.8 0.4 1.2 12.5 247 7.41
7 / 0.67 2.01 0.8 0.4 1.2 13.0 262 7.41
4 1 / 2.26 2.26 0.8 0.4 1.4 14.0 340 4.61
4 7 / 0.85 2.55 0.8 0.4 1.4 14.5 361 4.61
6 1 / 2.77 2.77 0.8 0.4 1.4 15.5 456 3.08
7 / 1.04 3.12 0.8 0.4 1.4 16.0 482 3.08
10 1 / 3.57 3.57 1.0 0.6 1.4 18.5 690 1.83
7 / 1.35 4.05 1.0 0.6 1.4 19.5 742 1.83
16 7 / 1.70 5.10 1.0 0.8 1.4 22.5 1059 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 27.5 1616 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 30.0 2107 0.524
1.5 1 / 1.38 1.38 0.7 0.4 1.2 11.5 210 12.1
7 / 0.52 1.56 0.7 0.4 1.2 12.0 223 12.1
2.5 1 / 1.78 1.78 0.8 0.4 1.2 13.5 293 7.41
7 / 0.67 2.01 0.8 0.4 1.2 14.0 313 7.41
4 1 / 2.26 2.26 0.8 0.6 1.4 15.5 424 4.61
5 7 / 0.85 2.55 0.8 0.6 1.4 16.5 452 4.61
6 1 / 2.77 2.77 0.8 0.6 1.4 17.0 548 3.08
7 / 1.04 3.12 0.8 0.6 1.4 17.5 579 3.08
10 1 / 3.57 3.57 1.0 0.6 1.4 20.0 839 1.83
7 / 1.35 4.05 1.0 0.6 1.4 21.5 898 1.83
16 7 / 1.70 5.10 1.0 0.8 1.6 25.0 1310 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 30.0 1969 0.727
35 7 / 2.52 7.56 1.2 1.2 1.6 33.5 2617 0.524
300/500 V PVC INSULATED AND PVC SHEATHED CABLES
Maximum
PVC/PVC (NYM) - IEC 60227 , SPLN 42-2
Nominal No./ Diameter Thickness
Conductor Nominal Nominal Overall
of Inner of of of Resistance
Thickness Thickness diameter Weight
cablesection of wire Conductor Insulation
Conductor
Cross- Diameter of of
at 20°C
area (approx.) (approx.) (approx.) (approx.) (approx.)
covering Sheath cable
mm kg/kmmm² No./mm mm mm
Page - 9
/kmmm mm
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 300/500 V
Insulation : PVC Compound type D Operating Temperature
Sheath : PVC Compound type ST5 Maximum 70°C
Colour Ident. : Insulation - Red,Black: Two core - Red,Black
Three core - Red,Yellow, Blue
Four core - Red,Yellow, Blue, Black
Five core - Black with numbering code
Sheath - White
Number
of
Core
-
0.75 1.13 7.0 64
2 1 0.21 1.31 7.5 74
1.5 1.58 8.5 98 13.3
2.5 0.26 2.04 10.0 145 7.98
0.75 1.13 7.5 75
3 1 0.21 1.31 7.5 87
1.5 1.58 9.0 121 13.3
2.5 0.26 2.04 10.5 180 7.98
0.75 1.13 8.0 90
4 1 0.21 1.31 8.5 108
1.5 1.58 10.0 150 13.3
2.5 0.26 2.04 11.5 219 7.98
0.75 1.13 9.0 111
5 1 0.21 1.31 9.5 129
1.5 1.58 11.0 182 13.3
2.5 0.26 2.04 13.0 266 7.98
Conductor Nominal Nominal Overall Maximum
Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor
of ResistanceCross- Diameter of of
section of wire Conductor Insulation
of of
(approx.) (approx.)
Sheath cable cable at 20°C
(approx.)
mm² mm mm mm mm mm kg/km
area (approx.)
0.6 0.8
0.26 0.7 0.8
/km
0.6 0.8
0.26 0.7 0.9
0.8 1.0
0.21 0.6 0.8
0.6 0.9
0.26 0.7 1.0
0.8 1.1
0.21 0.6 0.8
0.26 0.7 1.1
0.8 1.1
0.21 0.6 0.9
0.21
300/500 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-2)
Page - 10
0.8 1.2
0.80.6
0.6 0.9
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1.58 1.8 10.5 126 13.3
2.5 0.26 2.04 1.8 12.0 166 7.98
4 0.31 2.59 1.8 14.0 230 4.95
6 0.31 3.46 1.8 15.5 297 3.30
10 0.41 4.62 1.8 18.0 422 1.91
16 0.41 5.66 1.8 20.0 562 1.21
25 0.41 7.06 1.8 23.5 809 0.780
35 0.41 8.43 1.8 26.0 1061 0.554
50 0.41 10.07 1.8 30.5 1451 0.386
70 0.51 11.97 1.9 34.5 1949 0.272
95 0.51 13.73 2.0 39.0 2546 0.206
120 0.51 15.53 2.1 43.0 3160 0.161
Conductor
Maximum
Diameter
kg/km
1.6
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
0.26
mm mm mm
(approx.) (approx.)
of
Insulation Sheath
Thickness
area (approx.)(approx.)
Nominal Nominal
Conductor
/km
1.4
1.4
1.6
MaximumOverall
at 20°C
diameter
Resistance
cable
of
WeightThickness
of
mm² mmmm
section Conductor
Nominal Diameter
Cross- of
of wire
of
cable
0.7
0.8
1.0
1.0
1.0
1.0
1.2
1.2
Page - 11
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Red,Yellow , Blue
Sheath - Black
THREE CORES
1.5 1.58 1.8 11.0 153 13.3
2.5 0.26 2.04 1.8 12.5 204 7.98
4 0.31 2.59 1.8 14.5 287 4.95
6 0.31 3.46 1.8 16.5 380 3.30
10 0.41 4.62 1.8 19.0 552 1.91
16 0.41 5.66 1.8 21.0 744 1.21
25 0.41 7.06 1.8 25.0 1085 0.780
35 0.41 8.43 1.8 28.0 1443 0.554
50 0.41 10.07 1.8 32.5 1986 0.386
70 0.51 11.97 2.0 37.0 2702 0.272
95 0.51 13.73 2.1 42.0 3542 0.206
120 0.51 15.53 2.2 46.0 4408 0.161
(approx.)area (approx.) (approx.) (approx.)
at 20°Csection of wire Conductor Insulation Sheath cable cable
of ResistanceofCross- Diameter of of of
Conductor Nominal Nominal
Maximum Diameter Thickness Thickness diameter Weight
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Maximum
mm² mm mm mm mm mm kg/km
ConductorNominal
1.0
1.0
1.0
1.2
Overall
/km
0.26
0.8
1.0
0.7
1.6
1.2
1.4
1.4
1.6
Page - 12
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Red,Yellow , Blue , Black
Sheath - Black
FOUR CORES
1.5 1.58 1.8 12.0 181 13.3
2.5 0.26 2.04 1.8 13.5 247 7.98
4 0.31 2.59 1.8 16.0 353 4.95
6 0.31 3.46 1.8 18.0 471 3.30
10 0.41 4.62 1.8 20.5 696 1.91
16 0.41 5.66 1.8 23.5 942 1.21
25 0.41 7.06 1.8 27.5 1390 0.780
35 0.41 8.43 1.8 31.0 1856 0.554
50 0.41 10.07 1.9 36.0 2579 0.386
70 0.51 11.97 2.1 41.0 3517 0.272
95 0.51 13.73 2.2 47.0 4610 0.206
120 0.51 15.53 2.4 51.5 5769 0.161
Conductor Nominal Nominal Overall
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Maximum
Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
cable at 20°Csection of wire Conductor Insulation
area (approx.) (approx.) (approx.)
Sheath cable
1.0
1.2
(approx.)
mm² mm mm mm mm mm kg/km /km
0.26
0.8
1.0
0.7
1.2
1.4
1.0
1.0
1.4
1.6
1.6
Page - 13
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1.58 1.8 13.0 215 13.3
2.5 0.26 2.04 1.8 14.5 290 7.98
4 0.31 2.59 1.8 17.0 425 4.95
6 0.31 3.46 1.8 19.5 567 3.30
10 0.41 4.62 1.8 22.5 847 1.91
16 0.41 5.66 1.8 25.5 1154 1.21
25 0.41 7.06 1.8 30.5 1703 0.780
35 0.41 8.43 1.9 34.0 2297 0.554
50 0.41 10.07 2.0 40.0 3200 0.386
Conductor Nominal Nominal Overall
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Maximum
Nominal Maximum Diameter Thickness Thickness diameter Weight Conductor
of ResistanceCross- Diameter of of
section of wire Conductor Insulation
of of
(approx.) (approx.)
Sheath cable cable at 20°C
(approx.)
mm² mm mm mm mm mm kg/km
area (approx.)
/km
0.26
1.0
1.0
1.2
0.7
Page - 14
0.8
1.0
1.2
1.4
1.0
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 1.5 mm²
6 1.58 1.8 14.0 240 13.3
7 0.26 1.58 1.8 14.0 258 13.3
8 0.26 1.58 1.8 15.0 295 13.3
9 0.26 1.58 1.8 16.0 326 13.3
10 0.26 1.58 1.8 17.0 360 13.3
12 0.26 1.58 1.8 17.5 408 13.3
14 0.26 1.58 1.8 18.5 458 13.3
15 0.26 1.58 1.8 19.0 489 13.3
16 0.26 1.58 1.8 19.0 514 13.3
18 0.26 1.58 1.8 20.0 562 13.3
19 0.26 1.58 1.8 20.0 580 13.3
20 0.26 1.58 1.8 21.0 614 13.3
24 0.26 1.58 1.8 23.5 725 13.3
30 0.26 1.58 1.8 24.5 868 13.3
32 0.26 1.58 1.8 25.0 921 13.3
37 0.26 1.58 1.8 26.5 1034 13.3
40 0.26 1.58 1.8 27.5 1110 13.3
50 0.26 1.58 1.9 30.5 1374 13.3
52 0.26 1.58 1.9 31.5 1424 13.3
60 0.26 1.58 1.9 33.0 1617 13.3
61 0.26 1.58 1.9 33.0 1635 13.3
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
Conductor
0.7
0.7
0.7
0.7
Maximum Diameter
/km
0.26 0.7
0.7
0.7
0.7
mm mm mm mm mm kg/km
cable at 20°C
core (approx.) (approx.) (approx.) (approx.)
of of wire Conductor Insulation Sheath cable
Weight Conductor
No Diameter of of of of of Resistance
Thickness
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Nominal Nominal Overall Maximum
Thickness diameter
Page - 15
0.7
0.7
0.7
0.7
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 5) Uo/U - 450/750 V Insulation : PVC Compound type D Operating Temperature Filler : Suitable material Maximum 70°C Sheath : PVC Compound type ST5 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 2.5 mm²
6 2.04 1.8 15.5 331 7.98
7 0.26 2.04 1.8 15.5 358 7.98
8 0.26 2.04 1.8 17.0 406 7.98
9 0.26 2.04 1.8 18.0 455 7.98
10 0.26 2.04 1.8 19.5 505 7.98
12 0.26 2.04 1.8 20.0 577 7.98
14 0.26 2.04 1.8 21.0 654 7.98
15 0.26 2.04 1.8 21.5 697 7.98
16 0.26 2.04 1.8 22.0 732 7.98
18 0.26 2.04 1.8 23.0 806 7.98
19 0.26 2.04 1.8 23.0 834 7.98
20 0.26 2.04 1.8 24.0 887 7.98
24 0.26 2.04 1.8 27.0 1049 7.98
30 0.26 2.04 1.8 28.5 1266 7.98
32 0.26 2.04 1.8 29.0 1342 7.98
37 0.26 2.04 1.9 31.0 1527 7.98
40 0.26 2.04 1.9 32.0 1644 7.98
50 0.26 2.04 2.0 35.5 2037 7.98
52 0.26 2.04 2.0 36.5 2115 7.98
60 0.26 2.04 2.1 39.0 2423 7.98
61 0.26 2.04 2.1 39.0 2450 7.98
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
/km
0.26 0.8
0.8
0.8
0.8
mm mm mm mm mm kg/km
cable at 20°C
core (approx.) (approx.) (approx.) (approx.)
of of wire Conductor Insulation Sheath cable
Conductor
No Diameter of of of of of Resistance
Maximum Diameter Thickness Thickness diameter Weight
450/750 V PVC INSULATED AND PVC SHEATHED CABLESPVC/PVC Flexible (IEC 60227, SPLN 42-6-3)
Conductor Nominal Nominal Overall Maximum
Page - 16
0.8
0.8
0.8
0.8
0.8
0.8
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (PVC Compound)
up to request)
Binding tape (Manufacturer's option)
Outer sheath (PVC Compound)
Page - 17
Unarmoured Cables
PVC/PVC (acc. to IEC 60502-1)
Filler (Polyprophylene yarn,or extruded filler
1 1
22
3
4
5 5
1
2
3
4
5
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Sheath : PVC Compound type ST1 Maximum 70°C
: Insulation - Black
Sheath - Black
SINGLE CORE
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section of wire Conductor Insulation Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.8 1.4 6.0 52 12.1
1.5 7 / 0.52 1.56 0.8 1.4 6.0 55 12.1
2.5 1 / 1.78 1.78 0.8 1.4 6.5 65 7.41
2.5 7 / 0.67 2.01 0.8 1.4 6.5 70 7.41
4 1 / 2.26 2.26 1.0 1.4 7.5 90 4.61
4 7 / 0.85 2.55 1.0 1.4 7.5 95 4.61
6 7 / 1.04 3.12 1.0 1.4 8.0 120 3.08
10 7 / 1.35 4.05 1.0 1.4 9.0 170 1.83
16 7 / 1.70 5.10 1.0 1.4 10.0 235 1.15
25 7 / 2.13 6.39 1.2 1.4 12.0 345 0.727
35 7 / 2.52 7.56 1.2 1.4 13.0 450 0.524
50 19 / 1.83 9.15 1.4 1.4 15.0 620 0.387
70 19 / 2.17 10.85 1.4 1.4 16.5 825 0.268
95 19 / 2.52 12.60 1.6 1.5 19.0 1105 0.193
120 37 / 2.03 14.21 1.6 1.5 21.0 1350 0.153
150 37 / 2.27 15.89 1.8 1.6 23.0 1680 0.124
185 37 / 2.52 17.64 2.0 1.7 25.5 2060 0.0991
240 61 / 2.26 20.34 2.2 1.8 28.5 2685 0.0754
300 61 / 2.52 22.68 2.4 1.9 31.5 3315 0.0601
400 61 / 2.86 25.74 2.6 2.0 35.5 4235 0.0470
500 61 / 3.20 28.80 2.8 2.1 39.0 5250 0.0366
630 91 / 2.96 32.56 2.8 2.2 43.0 6560 0.0283
800 127 / 2.85 37.05 2.8 2.3 48.0 8345 0.0221
1000 127 / 3.20 41.60 3.0 2.5 53.0 10455 0.0176
Page - 18
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Filler : Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Red,Black
Sheath - Black
TWO CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.8 1.8 10.5 125 12.1
1.5 7 / 0.52 1.56 0.8 1.8 10.5 130 12.1
2.5 1 / 1.78 1.78 0.8 1.8 11.0 155 7.41
2.5 7 / 0.67 2.01 0.8 1.8 11.5 165 7.41
4 1 / 2.26 2.26 1.0 1.8 13.0 215 4.61
4 7 / 0.85 2.55 1.0 1.8 13.5 225 4.61
6 7 / 1.04 3.12 1.0 1.8 14.5 280 3.08
10 7 / 1.35 4.05 1.0 1.8 16.5 390 1.83
16 7 / 1.70 5.10 1.0 1.8 18.5 535 1.15
25 7 / 2.13 6.39 1.2 1.8 22.0 785 0.727
35 7 / 2.52 7.56 1.2 1.8 24.5 1020 0.524
50 19 / 1.83 9.15 1.4 1.8 28.5 1395 0.387
70 19 / 2.17 10.85 1.4 1.9 32.0 1865 0.268
95 19 / 2.52 12.60 1.6 2.0 36.5 2490 0.193
120 37 / 2.03 14.21 1.6 2.1 40.0 3045 0.153
150 37 / 2.27 15.89 1.8 2.2 44.5 3775 0.124
185 37 / 2.52 17.64 2.0 2.4 49.0 4635 0.0991
240 61 / 2.26 20.34 2.2 2.6 55.5 6045 0.0754
300 61 / 2.52 22.68 2.4 2.7 61.5 7435 0.0601
Page - 19
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Filler : Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Red,Yellow , Blue
Sheath - Black
THREE CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.8 1.8 11.0 150 12.1
1.5 7 / 0.52 1.56 0.8 1.8 11.0 160 12.1
2.5 1 / 1.78 1.78 0.8 1.8 11.5 190 7.41
2.5 7 / 0.67 2.01 0.8 1.8 12.0 200 7.41
4 1 / 2.26 2.26 1.0 1.8 13.5 270 4.61
4 7 / 0.85 2.55 1.0 1.8 14.0 285 4.61
6 7 / 1.04 3.12 1.0 1.8 15.5 360 3.08
10 7 / 1.35 4.05 1.0 1.8 17.5 515 1.83
16 7 / 1.70 5.10 1.0 1.8 19.5 720 1.15
25 7 / 2.13 6.39 1.2 1.8 23.5 1065 0.727
35 7 / 2.52 7.56 1.2 1.8 26.0 1400 0.524
50 6.8 1.4 1.8 24.5 1730 0.387
70 8.2 1.4 2.0 28.0 2405 0.268
95 Three- 9.7 1.6 2.1 32.5 3305 0.193
120 Segmental 10.9 1.6 2.2 35.0 3950 0.153
150 Stranded 11.9 1.8 2.3 38.5 4835 0.124
185 13.6 2.0 2.5 43.0 6035 0.0991
240 15.8 2.2 2.7 49.0 8050 0.0754
300 17.5 2.4 2.9 53.5 10010 0.0601
Page - 20
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Filler : Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Red,Yellow , Blue , Black
Sheath - Black
FOUR CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.8 1.8 11.5 180 12.1
1.5 7 / 0.52 1.56 0.8 1.8 12.0 190 12.1
2.5 1 / 1.78 1.78 0.8 1.8 12.5 235 7.41
2.5 7 / 0.67 2.01 0.8 1.8 13.0 245 7.41
4 1 / 2.26 2.26 1.0 1.8 15.0 335 4.61
4 7 / 0.85 2.55 1.0 1.8 15.5 355 4.61
6 7 / 1.04 3.12 1.0 1.8 16.5 450 3.08
10 7 / 1.35 4.05 1.0 1.8 19.0 650 1.83
16 7 / 1.70 5.10 1.0 1.8 21.5 915 1.15
25 7 / 2.13 6.39 1.2 1.8 25.5 1370 0.727
35 7 / 2.52 7.56 1.2 1.8 28.5 1805 0.524
50 8.1 1.4 1.9 28.0 2245 0.387
70 9.7 1.4 2.1 32.0 3125 0.268
95 Four- 11.4 1.6 2.2 37.0 4295 0.193
120 Segmental 12.9 1.6 2.4 40.5 5165 0.153
150 Stranded 14.2 1.8 2.5 44.5 6335 0.124
185 16.0 2.0 2.7 49.5 7895 0.0991
240 18.2 2.2 2.9 55.5 10510 0.0754
300 20.6 2.4 3.1 62.0 13110 0.0601
Page - 21
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Filler : Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
FIVE CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.8 1.8 12.5 215 12.1
1.5 7 / 0.52 1.56 0.8 1.8 13.0 225 12.1
2.5 1 / 1.78 1.78 0.8 1.8 13.5 275 7.41
2.5 7 / 0.67 2.01 0.8 1.8 14.0 290 7.41
4 1 / 2.26 2.26 1.0 1.8 16.0 400 4.61
4 7 / 0.85 2.55 1.0 1.8 17.0 425 4.61
6 7 / 1.04 3.12 1.0 1.8 18.0 545 3.08
10 7 / 1.35 4.05 1.0 1.8 21.0 790 1.83
16 7 / 1.70 5.10 1.0 1.8 23.5 1125 1.15
25 7 / 2.13 6.39 1.2 1.8 28.0 1680 0.727
35 7 / 2.52 7.56 1.2 1.9 31.5 2245 0.524
50 19 / 1.83 9.15 1.4 2.1 37.5 3130 0.387
Page - 22
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1)
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 1.5 mm² (Solid conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 1.5 1 / 1.38 1.38 0.8 1.8 13.5 240 12.1
7 1.5 1 / 1.38 1.38 0.8 1.8 13.5 260 12.1
8 1.5 1 / 1.38 1.38 0.8 1.8 14.5 290 12.1
9 1.5 1 / 1.38 1.38 0.8 1.8 15.5 325 12.1
10 1.5 1 / 1.38 1.38 0.8 1.8 16.5 360 12.1
12 1.5 1 / 1.38 1.38 0.8 1.8 17.0 410 12.1
14 1.5 1 / 1.38 1.38 0.8 1.8 18.0 460 12.1
15 1.5 1 / 1.38 1.38 0.8 1.8 18.5 490 12.1
16 1.5 1 / 1.38 1.38 0.8 1.8 19.0 515 12.1
18 1.5 1 / 1.38 1.38 0.8 1.8 20.0 565 12.1
19 1.5 1 / 1.38 1.38 0.8 1.8 20.0 585 12.1
20 1.5 1 / 1.38 1.38 0.8 1.8 20.5 615 12.1
21 1.5 1 / 1.38 1.38 0.8 1.8 21.5 650 12.1
24 1.5 1 / 1.38 1.38 0.8 1.8 23.0 735 12.1
30 1.5 1 / 1.38 1.38 0.8 1.8 24.5 880 12.1
32 1.5 1 / 1.38 1.38 0.8 1.8 25.0 930 12.1
37 1.5 1 / 1.38 1.38 0.8 1.8 26.5 1050 12.1
40 1.5 1 / 1.38 1.38 0.8 1.8 27.5 1130 12.1
50 1.5 1 / 1.38 1.38 0.8 1.9 30.0 1395 12.1
52 1.5 1 / 1.38 1.38 0.8 1.9 31.0 1450 12.1
60 1.5 1 / 1.38 1.38 0.8 2.0 33.0 1665 12.1
61 1.5 1 / 1.38 1.38 0.8 2.0 33.0 1685 12.1
Page - 23
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 1.5 mm² (Stranded conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 1.5 7 / 0.52 1.56 0.8 1.8 14.0 255 12.1
7 1.5 7 / 0.52 1.56 0.8 1.8 14.0 275 12.1
8 1.5 7 / 0.52 1.56 0.8 1.8 15.0 310 12.1
9 1.5 7 / 0.52 1.56 0.8 1.8 16.0 345 12.1
10 1.5 7 / 0.52 1.56 0.8 1.8 17.5 380 12.1
12 1.5 7 / 0.52 1.56 0.8 1.8 18.0 430 12.1
14 1.5 7 / 0.52 1.56 0.8 1.8 19.0 490 12.1
15 1.5 7 / 0.52 1.56 0.8 1.8 19.5 515 12.1
16 1.5 7 / 0.52 1.56 0.8 1.8 20.0 545 12.1
18 1.5 7 / 0.52 1.56 0.8 1.8 21.0 600 12.1
19 1.5 7 / 0.52 1.56 0.8 1.8 21.0 620 12.1
20 1.5 7 / 0.52 1.56 0.8 1.8 21.5 650 12.1
21 1.5 7 / 0.52 1.56 0.8 1.8 22.5 685 12.1
24 1.5 7 / 0.52 1.56 0.8 1.8 24.5 775 12.1
30 1.5 7 / 0.52 1.56 0.8 1.8 25.5 930 12.1
32 1.5 7 / 0.52 1.56 0.8 1.8 26.0 980 12.1
37 1.5 7 / 0.52 1.56 0.8 1.8 27.5 1110 12.1
40 1.5 7 / 0.52 1.56 0.8 1.8 28.5 1195 12.1
50 1.5 7 / 0.52 1.56 0.8 1.9 32.0 1475 12.1
52 1.5 7 / 0.52 1.56 0.8 1.9 32.5 1530 12.1
60 1.5 7 / 0.52 1.56 0.8 2.0 35.0 1760 12.1
61 1.5 7 / 0.52 1.56 0.8 2.0 35.0 1780 12.1
Page - 24
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1)
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 2.5 mm² (Solid conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 2.5 1 / 1.78 1.78 0.8 1.8 14.5 315 7.41
7 2.5 1 / 1.78 1.78 0.8 1.8 14.5 340 7.41
8 2.5 1 / 1.78 1.78 0.8 1.8 16.0 390 7.41
9 2.5 1 / 1.78 1.78 0.8 1.8 17.0 435 7.41
10 2.5 1 / 1.78 1.78 0.8 1.8 18.5 480 7.41
12 2.5 1 / 1.78 1.78 0.8 1.8 19.0 550 7.41
14 2.5 1 / 1.78 1.78 0.8 1.8 20.0 625 7.41
15 2.5 1 / 1.78 1.78 0.8 1.8 20.5 665 7.41
16 2.5 1 / 1.78 1.78 0.8 1.8 21.0 705 7.41
18 2.5 1 / 1.78 1.78 0.8 1.8 22.0 775 7.41
19 2.5 1 / 1.78 1.78 0.8 1.8 22.0 800 7.41
20 2.5 1 / 1.78 1.78 0.8 1.8 22.5 845 7.41
21 2.5 1 / 1.78 1.78 0.8 1.8 23.5 890 7.41
24 2.5 1 / 1.78 1.78 0.8 1.8 25.5 1010 7.41
30 2.5 1 / 1.78 1.78 0.8 1.8 27.0 1220 7.41
32 2.5 1 / 1.78 1.78 0.8 1.8 27.5 1290 7.41
37 2.5 1 / 1.78 1.78 0.8 1.9 29.5 1475 7.41
40 2.5 1 / 1.78 1.78 0.8 1.9 30.5 1590 7.41
50 2.5 1 / 1.78 1.78 0.8 2.0 33.5 1970 7.41
52 2.5 1 / 1.78 1.78 0.8 2.0 34.5 2045 7.41
60 2.5 1 / 1.78 1.78 0.8 2.1 37.0 2345 7.41
61 2.5 1 / 1.78 1.78 0.8 2.1 37.0 2380 7.41
Page - 25
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 2.5 mm² (Stranded conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 2.5 7 / 0.67 2.01 0.8 1.8 15.5 330 7.41
7 2.5 7 / 0.67 2.01 0.8 1.8 15.5 360 7.41
8 2.5 7 / 0.67 2.01 0.8 1.8 16.5 410 7.41
9 2.5 7 / 0.67 2.01 0.8 1.8 17.5 460 7.41
10 2.5 7 / 0.67 2.01 0.8 1.8 19.0 505 7.41
12 2.5 7 / 0.67 2.01 0.8 1.8 19.5 580 7.41
14 2.5 7 / 0.67 2.01 0.8 1.8 20.5 660 7.41
15 2.5 7 / 0.67 2.01 0.8 1.8 21.0 700 7.41
16 2.5 7 / 0.67 2.01 0.8 1.8 22.0 740 7.41
18 2.5 7 / 0.67 2.01 0.8 1.8 23.0 815 7.41
19 2.5 7 / 0.67 2.01 0.8 1.8 23.0 845 7.41
20 2.5 7 / 0.67 2.01 0.8 1.8 23.5 890 7.41
21 2.5 7 / 0.67 2.01 0.8 1.8 25.0 930 7.41
24 2.5 7 / 0.67 2.01 0.8 1.8 26.5 1065 7.41
30 2.5 7 / 0.67 2.01 0.8 1.8 28.5 1285 7.41
32 2.5 7 / 0.67 2.01 0.8 1.8 29.0 1360 7.41
37 2.5 7 / 0.67 2.01 0.8 1.9 30.5 1555 7.41
40 2.5 7 / 0.67 2.01 0.8 1.9 32.0 1675 7.41
50 2.5 7 / 0.67 2.01 0.8 2.0 35.5 2075 7.41
52 2.5 7 / 0.67 2.01 0.8 2.0 36.5 2155 7.41
60 2.5 7 / 0.67 2.01 0.8 2.1 38.5 2475 7.41
61 2.5 7 / 0.67 2.01 0.8 2.1 38.5 2510 7.41
Page - 26
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 4 mm² (Solid conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 4 1 / 2.26 2.26 1.0 1.8 17.5 460 4.61
7 4 1 / 2.26 2.26 1.0 1.8 17.5 500 4.61
8 4 1 / 2.26 2.26 1.0 1.8 19.0 570 4.61
9 4 1 / 2.26 2.26 1.0 1.8 20.0 640 4.61
10 4 1 / 2.26 2.26 1.0 1.8 22.0 710 4.61
12 4 1 / 2.26 2.26 1.0 1.8 22.5 820 4.61
14 4 1 / 2.26 2.26 1.0 1.8 24.0 940 4.61
15 4 1 / 2.26 2.26 1.0 1.8 24.5 995 4.61
16 4 1 / 2.26 2.26 1.0 1.8 25.0 1060 4.61
18 4 1 / 2.26 2.26 1.0 1.8 26.5 1165 4.61
19 4 1 / 2.26 2.26 1.0 1.8 26.5 1210 4.61
20 4 1 / 2.26 2.26 1.0 1.8 27.0 1280 4.61
21 4 1 / 2.26 2.26 1.0 1.8 28.5 1340 4.61
24 4 1 / 2.26 2.26 1.0 1.9 31.0 1540 4.61
30 4 1 / 2.26 2.26 1.0 2.0 33.0 1890 4.61
32 4 1 / 2.26 2.26 1.0 2.0 34.0 2000 4.61
37 4 1 / 2.26 2.26 1.0 2.1 36.0 2285 4.61
40 4 1 / 2.26 2.26 1.0 2.1 37.5 2465 4.61
50 4 1 / 2.26 2.26 1.0 2.3 41.5 3070 4.61
52 4 1 / 2.26 2.26 1.0 2.3 43.0 3190 4.61
60 4 1 / 2.26 2.26 1.0 2.4 45.5 3660 4.61
61 4 1 / 2.26 2.26 1.0 2.4 45.5 3715 4.61
Page - 27
Unarmoured Cables
(to IEC 60228 clas 1) Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED AND PVC SHEATHED CABLES
PVC/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
Insulation : PVC Compound type A Operating Temperature
Filler (if necessary): Suitable material Maximum 70°C
Sheath : PVC Compound type ST1
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 4 mm² (Stranded conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 4 7 / 0.85 2.55 1.0 1.8 18.5 485 4.61
7 4 7 / 0.85 2.55 1.0 1.8 18.5 535 4.61
8 4 7 / 0.85 2.55 1.0 1.8 20.0 605 4.61
9 4 7 / 0.85 2.55 1.0 1.8 21.0 675 4.61
10 4 7 / 0.85 2.55 1.0 1.8 23.0 750 4.61
12 4 7 / 0.85 2.55 1.0 1.8 24.0 865 4.61
14 4 7 / 0.85 2.55 1.0 1.8 25.0 990 4.61
15 4 7 / 0.85 2.55 1.0 1.8 25.5 1050 4.61
16 4 7 / 0.85 2.55 1.0 1.8 26.5 1115 4.61
18 4 7 / 0.85 2.55 1.0 1.8 28.0 1230 4.61
19 4 7 / 0.85 2.55 1.0 1.8 28.0 1280 4.61
20 4 7 / 0.85 2.55 1.0 1.8 29.0 1350 4.61
21 4 7 / 0.85 2.55 1.0 1.8 30.5 1420 4.61
24 4 7 / 0.85 2.55 1.0 1.9 33.0 1625 4.61
30 4 7 / 0.85 2.55 1.0 2.0 35.0 1990 4.61
32 4 7 / 0.85 2.55 1.0 2.0 35.5 2110 4.61
37 4 7 / 0.85 2.55 1.0 2.1 38.0 2410 4.61
40 4 7 / 0.85 2.55 1.0 2.1 39.5 2600 4.61
50 4 7 / 0.85 2.55 1.0 2.3 44.0 3240 4.61
52 4 7 / 0.85 2.55 1.0 2.3 45.5 3365 4.61
60 4 7 / 0.85 2.55 1.0 2.4 48.5 3860 4.61
61 4 7 / 0.85 2.55 1.0 2.4 48.5 3915 4.61
Page - 28
Unarmoured Cables
(to IEC 60228 clas 2) Uo/U - 600/1000 V
Colour Ident.
W/km
Section 2 - PVC Insulated CablesUnarmoured Cables
Constructions : Conductor (Annealed Copper) Insulation (PVC Compound) Filler (Polyprophylene yarn,or extruded filler up to request) Binding tape (Manufacturer's option) Copper Tape screen Binding tape (Manufacturer's option) Outer sheath (PVC Compound)
600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)
Page - 29
123
4567
1
2
3
4
5
7
6
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Copper wire screen.* Polyethylene / Low smoke Halogen Free sheathed
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.8 0.1 1.8 10.5 145 12.1
1.5 7 / 0.52 1.56 0.8 0.1 1.8 11.0 147 12.1
2.5 1 / 1.78 1.78 0.8 0.1 1.8 11.5 176 7.41
2.5 7 / 0.67 2.01 0.8 0.1 1.8 11.5 179 7.41
4 1 / 2.26 2.26 1.0 0.1 1.8 13.0 240 4.61
4 7 / 0.85 2.55 1.0 0.1 1.8 13.5 246 4.61
6 7 / 1.04 3.12 1.0 0.1 1.8 14.5 304 3.08
10 7 / 1.35 4.05 1.0 0.1 1.8 16.5 418 1.83
16 7 / 1.70 5.10 1.0 0.1 1.8 18.5 568 1.15
25 7 / 2.13 6.39 1.2 0.1 1.8 22.0 822 0.727
35 7 / 2.52 7.56 1.2 0.1 1.8 24.5 1064 0.524
50 19 / 1.83 9.15 1.4 0.1 1.8 28.5 1450 0.387
70 19 / 2.17 10.85 1.4 0.1 1.9 32.0 1910 0.268
95 19 / 2.52 12.60 1.6 0.1 2.0 36.5 2542 0.193
120 37 / 2.03 14.21 1.6 0.1 2.1 40.0 3103 0.153
150 37 / 2.27 15.89 1.8 0.1 2.2 44.5 3840 0.124
185 37 / 2.52 17.64 2.0 0.1 2.4 49.0 4679 0.0991
240 61 / 2.26 20.34 2.2 0.1 2.6 55.5 6096 0.0754
300 61 / 2.52 22.68 2.4 0.1 2.7 61.5 7523 0.0601
Thickness
PVC/PVC-S (IEC 60502-1)
Nominal
Cross- of
Thickness
Overall
diameter
of
Nominal
(approx.)
600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES
Diameter
of
Nominal
Thickness
of
Nominal
No./
Diameter
at 20°Ccable
mm
Conductor
mm² No./mm
Conductorsection area of wire
(approx.)
Weight
of
Maximum
Conductor
Resistance
cable
mm mm
Sheath
mm
Insulation
(approx.)
/kmkg/km
(approx.) (approx.)
of
Copper tape
mm
Page - 30
Section 2 - PVC Insulated CablesUnarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow , Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.8 0.1 1.8 11.0 173 12.1
1.5 7 / 0.52 1.56 0.8 0.1 1.8 11.5 174 12.1
2.5 1 / 1.78 1.78 0.8 0.1 1.8 12.0 214 7.41
2.5 7 / 0.67 2.01 0.8 0.1 1.8 12.5 220 7.41
4 1 / 2.26 2.26 1.0 0.1 1.8 14.0 298 4.61
4 7 / 0.85 2.55 1.0 0.1 1.8 14.5 306 4.61
6 7 / 1.04 3.12 1.0 0.1 1.8 15.0 385 3.08
10 7 / 1.35 4.05 1.0 0.1 1.8 17.5 542 1.83
16 7 / 1.70 5.10 1.0 0.1 1.8 20.0 753 1.15
25 7 / 2.13 6.39 1.2 0.1 1.8 23.5 1108 0.727
35 7 / 2.52 7.56 1.2 0.1 1.8 26.0 1445 0.524
50 6.8 1.4 0.1 1.9 25.0 1774 0.387
70 8.2 1.4 0.1 2.0 28.0 2439 0.268
95 9.7 1.6 0.1 2.1 32.5 3348 0.193
120 10.9 1.6 0.1 2.2 35.0 3994 0.153
150 11.9 1.8 0.1 2.4 38.5 4885 0.124
185 13.6 2.0 0.1 2.5 43.0 6076 0.0991
240 15.8 2.2 0.1 2.7 48.5 8095 0.0754
300 17.5 2.4 0.1 2.9 53.5 10060 0.0601
Maximum
Nominal No./ Diameter Thickness
Conductor Nominal Nominal Overall
of of
Thickness diameter Weight Conductor
at 20°Csection area of wire Conductor Insulation
of of ResistanceCross- Diameter
Segmental
Stranded
kg/kmmm mmmm² No./mm mm mm
600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)
/km
Three-
(approx.) (approx.) (approx.)(approx.)
Sheath cable cable
of
Thickness
of
Copper tape
mm
(approx.)
Nominal
Page - 31
Section 2 - PVC Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow , Blue , Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.8 0.1 1.8 12.0 202 12.1
1.5 7 / 0.52 1.56 0.8 0.1 1.8 12.5 206 12.1
2.5 1 / 1.78 1.78 0.8 0.1 1.8 13.0 260 7.41
2.5 7 / 0.67 2.01 0.8 0.1 1.8 13.5 265 7.41
4 1 / 2.26 2.26 1.0 0.1 1.8 15.0 366 4.61
4 7 / 0.85 2.55 1.0 0.1 1.8 15.5 378 4.61
6 7 / 1.04 3.12 1.0 0.1 1.8 17.0 482 3.08
10 7 / 1.35 4.05 1.0 0.1 1.8 19.5 682 1.83
16 7 / 1.70 5.10 1.0 0.1 1.8 21.5 957 1.15
25 7 / 2.13 6.39 1.2 0.1 1.8 26.0 1412 0.727
35 7 / 2.52 7.56 1.2 0.1 1.8 28.5 1856 0.524
50 8.1 1.4 0.1 2.0 28.5 2302 0.387
70 9.7 1.4 0.1 2.1 32.0 3177 0.268
95 11.4 1.6 0.1 2.2 37.0 4360 0.193
120 12.9 1.6 0.1 2.4 40.5 5217 0.153
150 14.2 1.8 0.1 2.5 44.5 6394 0.124
185 16.0 2.0 0.1 2.7 49.5 7962 0.0991
240 18.2 2.2 0.1 2.9 55.5 10591 0.0754
300 20.6 2.4 0.1 3.1 61.5 13179 0.0601
Nominal
Stranded
Segmental
Four-
600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)
No./ Diameter Thickness
Conductor Nominal Nominal Overall Maximum
ResistanceCross- Diameter of of
Thickness diameter Weight ConductorNominal
of wire Conductor Insulation
of of of
/kmmm² No./mm mm mm
Sheath cable cable at 20°Csection area
mm mm
(approx.) (approx.) (approx.) (approx.)
kg/km
Thickness
of
Copper tape
mm
(approx.)
Page - 32
Section 2 - PVC Insulated CablesUnarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.8 0.1 1.8 12.5 238 12.1
1.5 7 / 0.52 1.56 0.8 0.1 1.8 13.5 244 12.1
2.5 1 / 1.78 1.78 0.8 0.1 1.8 14.0 302 7.41
2.5 7 / 0.67 2.01 0.8 0.1 1.8 14.5 312 7.41
4 1 / 2.26 2.26 1.0 0.1 1.8 16.5 434 4.61
4 7 / 0.85 2.55 1.0 0.1 1.8 17.0 450 4.61
6 7 / 1.04 3.12 1.0 0.1 1.8 18.5 578 3.08
10 7 / 1.35 4.05 1.0 0.1 1.8 21.0 827 1.83
16 7 / 1.70 5.10 1.0 0.1 1.8 24.0 1166 1.15
25 7 / 2.13 6.39 1.2 0.1 1.8 28.5 1730 0.727
35 7 / 2.52 7.56 1.2 0.1 1.9 31.5 2286 0.524
50 19 / 1.83 9.15 1.4 0.1 2.1 37.5 3057 0.387
Conductor Nominal Nominal OverallNominal
Thickness diameter Weight ConductorNominal No./ Diameter Thickness
section area of wire Conductor Insulation
of ofCross- Diameter of of
mm mm kg/km /kmmm² No./mm mm mm
(approx.) (approx.)
600/1000 V PVC INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESPVC/PVC-S (IEC 60502-1)
Sheath cable cable at 20°C
(approx.) (approx.)
Maximum
of Resistance
mm
(approx.)
Page - 33
Thickness
of
Copper tape
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (PVC Compound)
Inner Covering (PVC Compound)
Binding tape (Manufacturer's option)
Outer sheath (PVC Compound)
600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (PVC Compound)
up to request)
Binding tape (Manufacturer's option)
Inner Covering (PVC Compound)
Binding tape (Manufacturer's option)
Outer sheath (PVC Compound)
Page - 34
Armoured Cables
PVC/AWA/PVC (acc. to IEC 60502-1)
Round Aluminium Wire armour
PVC/SWA/PVC (acc. to IEC 60502-1)
Filler (Polyprophylene yarn,or extruded filler
Galvanized Round Steel Wire armour
11
2
3
5
4
6
7
8
2
3
4
5
6
7
8
1
2
3
4
5
6
1
2
3
4
5
6
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED,ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLES
PVC/AWA/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : PVC Compound type A Operating Temperature
Inner covering : PVC Compound ST1 Maximum 70°C
Armour
Sheath : PVC Compound type ST1
: Insulation - Black
Sheath - Black
SINGLE CORE
Conductor Nominal Nominal Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter of Thickness diameter Weight Conductor
Cross- Diameter of of of inner of of of Resistance
section of wire Conductor Insulation covering wire Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm mm mm kg/km
16 7 / 1.70 5.10 1.0 1.0 0.8 1.8 14.5 370 1.15
25 7 / 2.13 6.39 1.2 1.0 0.8 1.8 16.5 495 0.727
35 7 / 2.52 7.56 1.2 1.0 0.8 1.8 17.5 620 0.524
50 19 / 1.83 9.15 1.4 1.0 1.25 1.8 20.5 845 0.387
70 19 / 2.17 10.85 1.4 1.0 1.25 1.8 22.0 1075 0.268
95 19 / 2.52 12.60 1.6 1.0 1.25 1.8 24.5 1380 0.193
120 37 / 2.03 14.21 1.6 1.0 1.6 1.8 27.0 1705 0.153
150 37 / 2.27 15.89 1.8 1.0 1.6 1.8 29.0 2054 0.124
185 37 / 2.52 17.64 2.0 1.0 1.6 1.8 31.0 2450 0.0991
240 61 / 2.26 20.34 2.2 1.0 1.6 1.9 34.0 3110 0.0754
300 61 / 2.52 22.68 2.4 1.0 2.0 2.0 38.0 3865 0.0601
400 61 / 2.86 25.74 2.6 1.2 2.0 2.1 42.0 4885 0.0470
500 61 / 3.20 28.80 2.8 1.2 2.0 2.2 46.0 5965 0.0366
630 91 / 2.96 32.56 2.8 1.2 2.0 2.4 50.0 7335 0.0283
800 127 / 2.85 37.05 2.8 1.4 2.5 2.5 56.0 9410 0.0221
1000 127 / 3.20 41.60 3.0 1.4 2.5 2.7 61.0 11635 0.0176
Page - 35
Armoured Cables
Uo/U - 600/1000 V
: Aluminium Wire
Colour Ident.
Aluminium
W/km
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 14.0 332 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 14.5 347 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 15.0 380 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 15.5 395 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 16.5 473 4.61
4 7 / 0.85 2.55 1.0 1.0 0.8 1.8 17.5 494 4.61
6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 19.0 667 3.08
10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 21.0 837 1.83
16 7 / 1.70 5.10 1.0 1.0 1.25 1.8 23.0 1019 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 27.5 1507 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 1.8 30.0 1810 0.524
50 19 / 1.83 9.15 1.4 1.0 1.6 1.9 34.0 2318 0.387
70 19 / 2.17 10.85 1.4 1.0 2.0 2.0 38.0 3122 0.268
95 19 / 2.52 12.60 1.6 1.2 2.0 2.2 43.5 3987 0.193
120 37 / 2.03 14.21 1.6 1.2 2.0 2.3 47.0 4695 0.153
150 37 / 2.27 15.89 1.8 1.2 2.5 2.4 52.0 5994 0.124
185 37 / 2.52 17.64 2.0 1.4 2.5 2.6 57.0 7109 0.0991
240 61 / 2.26 20.34 2.2 1.4 2.5 2.8 63.5 8827 0.0754
300 61 / 2.52 22.68 2.4 1.6 2.5 2.9 70.0 10574 0.0601
(approx.)
mm mm mm kg/kmmmmmmm² No./mm mm
area (approx.) (approx.)
Cross- Diameter of of
section of wire Conductor
Maximum
(approx.)
Insulation
Conductor
of of of
Thickness
of Inner
covering
Diameter Thickness
OverallNominal Nominal
Diameter Weightdiameter
Nominal
cable cable at 20°C
(approx.)
600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (IEC 60502-1)
Thickness
Sheath
Conductor
/km
Resistance
Nominal No./
of Galv.
Steel wire
Page - 36
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 14.5 371 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 15.0 385 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 15.5 429 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 16.0 446 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 18.0 637 4.61
4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 18.5 660 4.61
6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 20.0 768 3.08
10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 22.0 973 1.83
16 7 / 1.70 5.10 1.0 1.0 1.25 1.8 24.0 1229 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 29.0 1819 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 1.8 31.5 2230 0.524
50 6.8 1.4 1.0 1.6 2.0 30.5 2558 0.387
70 8.2 1.4 1.2 2.0 2.1 34.5 3577 0.268
95 9.7 1.6 1.2 2.0 2.2 39.0 4653 0.193
120 10.9 1.6 1.2 2.0 2.3 42.0 5410 0.153
150 11.9 1.8 1.4 2.5 2.5 46.0 6830 0.124
185 13.6 2.0 1.4 2.5 2.7 51.0 8260 0.0991
240 15.8 2.2 1.6 2.5 2.9 57.0 10632 0.0754
300 17.5 2.4 1.6 2.5 3.1 62.0 12795 0.0601
Sector Shape
mm mm
(approx.)
mm² No./mm /km
(approx.) (approx.)
mm mm kg/km
(approx.)
Maximum
Sheath cable
Thickness
Resistance
cable at 20°C
Conductor Nominal Nominal OverallNominal
mm mm
area (approx.)
Nominal No./ Diameter Thickness ConductorThickness Diameter
of of of Galv. ofof Inner
diameter Weight
Conductor Insulation
Cross- Diameter of of
600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/SWA/PVC (IEC 60502-1)
Page - 37
covering Steel wiresection of wire
stranded
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 15.5 412 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 16.0 434 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 16.5 486 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 17.0 508 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 19.5 736 4.61
4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 20.0 762 4.61
6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 21.0 894 3.08
10 7 / 1.35 4.05 1.0 1.0 1.25 1.8 23.5 1142 1.83
16 7 / 1.70 5.10 1.0 1.0 1.6 1.8 27.0 1621 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 1.8 31.0 2183 0.727
35 7 / 2.52 7.56 1.2 1.0 1.6 1.9 34.0 2698 0.524
50 8.1 1.4 1.2 2.0 2.1 35.0 3467 0.387
70 9.7 1.4 1.2 2.0 2.2 38.5 4455 0.268
95 11.4 1.6 1.2 2.5 2.4 44.5 6222 0.193
120 12.9 1.6 1.4 2.5 2.5 48.5 7248 0.153
150 14.2 1.8 1.4 2.5 2.7 52.5 8663 0.124
185 16.0 2.0 1.6 2.5 2.9 58.0 10503 0.0991
240 18.2 2.2 1.6 2.5 3.1 63.5 13414 0.0754
300 20.6 2.4 1.6 2.5 3.3 70.0 16298 0.0601
Conductor Nominal MaximumNominal
PVC/SWA/PVC (IEC 60502-1)
Weight ConductorNominal No./ Diameter Thickness Thickness Diameter
of ResistanceCross- Diameter of of of Inner of Galv. of
at 20°Csection of wire Conductor Insulation covering Steel wire Sheath cable
stranded
mm² No./mm mm
cable
area (approx.) (approx.) (approx.) (approx.)
/km
Sector Shape
mm mm
(approx.)
kg/kmmm
600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLES
Page - 38
mm
of
mm
Thickness
Nominal
diameter
Overall
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 1.8 16.5 465 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 1.8 17.0 488 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 1.8 17.5 551 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 1.8 18.0 572 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 1.8 20.5 835 4.61
4 7 / 0.85 2.55 1.0 1.0 1.25 1.8 21.5 865 4.61
6 7 / 1.04 3.12 1.0 1.0 1.25 1.8 22.5 1021 3.08
10 7 / 1.35 4.05 1.0 1.0 1.6 1.8 26.5 1479 1.83
16 7 / 1.70 5.10 1.0 1.0 1.60 1.8 29.0 1893 1.15
25 7 / 2.13 6.39 1.2 1.0 1.6 1.9 33.5 2577 0.727
35 7 / 2.52 7.56 1.2 1.0 2.0 2.0 38.0 3468 0.524
50 19 / 1.83 9.15 1.4 1.2 2.0 2.2 44.0 4503 0.387
/kmmm mm mm mm
(approx.)
mm² No./mm mm mm kg/km
Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
of of of Resistance
section of wire Conductor Insulation covering Steel wire
Thickness diameter Weight Conductor
Cross- Diameter of of of Inner of Galv.
Nominal No./ Diameter Thickness Thickness Diameter
PVC/SWA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall MaximumNominal
600/1000 V PVC INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLES
Page - 39
Section 2 - PVC Insulated Cables Armoured Cables
Constructions : Constructions :Conductor (Annealed Copper)Insulation (PVC Compound)Filler (Polyprophylene yarn,or extruded filler up to request)Inner Covering (PVC Compound)Galvanized Flat Steel Wire armourGalvanized Steel Tape bindingOuter sheath (PVC Compound)
600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (acc. to IEC 60502-1)
Page - 40
1
2
34
5
6
7
8
123
4567
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 2 - PVC Insulated CablesArmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 14.0 406 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 14.5 417 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 15.0 442 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 15.5 480 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 17.0 569 4.61
4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 17.5 584 4.61
6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 18.5 674 3.08
10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 20.5 826 1.83
16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 22.5 1040 1.15
25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 26.0 1365 0.727
35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.8 28.0 1672 0.524
50 19 / 1.83 9.15 1.4 1.0 0.8 0.3 1.8 32.0 2134 0.387
70 19 / 2.17 10.85 1.4 1.0 0.8 0.3 1.9 35.5 2691 0.268
95 19 / 2.52 12.60 1.6 1.2 0.8 0.3 2.1 41.0 3484 0.193
120 37 / 2.03 14.21 1.6 1.2 0.8 0.3 2.2 44.5 4149 0.153
150 37 / 2.27 15.89 1.8 1.2 0.8 0.3 2.3 49.0 4995 0.124
185 37 / 2.52 17.64 2.0 1.4 0.8 0.3 2.4 53.5 5968 0.0991
240 61 / 2.26 20.34 2.2 1.4 0.8 0.3 2.6 60.0 7540 0.0754
300 61 / 2.52 22.68 2.4 1.6 0.8 0.3 2.8 66.5 9178 0.0601
Minimumthicknessof Galv.
Steel tapemm
of Innercovering(approx.)
thicknessof Galv.
FlatSteel wire
mm mm mm kg/kmmmmm
of section of wire Conductor
mm² No./mm mmarea (approx.) (approx.)
Maximum
(approx.)Insulation
ConductorCross- Diameter of of of of
Nominal No./ Diameter ThicknessOverall
Thickness Weightdiameter
cable cable at 20°C(approx.)
/km
Resistance
Conductor Nominal Nominal
600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)
Thickness
Sheath
Nominal
Page - 41
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 14.5 437 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 15.0 447 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 15.5 509 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 16.0 524 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 17.5 631 4.61
4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 18.0 649 4.61
6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 19.0 760 3.08
10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 21.5 982 1.83
16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 23.5 1230 1.15
25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 27.0 1685 0.727
35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.8 30.0 2089 0.524
50 6.8 1.4 1.0 0.8 0.3 1.9 28.5 2385 0.387
70 8.2 1.4 1.2 0.8 0.3 2.0 32.0 3149 0.268
95 9.7 1.6 1.2 0.8 0.3 2.2 37.0 4184 0.193
120 10.9 1.6 1.2 0.8 0.3 2.3 39.5 4902 0.153
150 11.9 1.8 1.4 0.8 0.3 2.4 43.0 5887 0.124
185 13.6 2.0 1.4 0.8 0.3 2.6 47.5 7212 0.0991
240 15.8 2.2 1.6 0.8 0.3 2.8 54.0 9457 0.0754
300 17.5 2.4 1.6 0.8 0.3 2.9 58.5 11517 0.0601
Minimumthicknessof Galv.
/km
Sector Shape
mm mm mm(approx.)
mm² No./mm mm mm mm mm kg/kmarea (approx.) (approx.) (approx.)
Sheath cablecovering Flat(approx.) Steel wire Steel tape
cable at 20°C
Conductor Nominal Nominal OverallThickness thickness
of Inner
MaximumThickness diameter Weight ConductorNominal No./ Diameter Thickness
of ResistanceCross- Diameter of of of Galv.section of wire Conductor Insulation
of of
600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)
Nominal
Page - 42
stranded
Section 2 - PVC Insulated CablesArmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 15.5 497 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 16.0 510 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 16.5 560 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 17.0 602 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 18.5 731 4.61
4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 19.5 754 4.61
6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 20.5 890 3.08
10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 23.0 1157 1.83
16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 25.5 1498 1.15
25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 29.5 2055 0.727
35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.9 32.5 2567 0.524
50 8.1 1.4 1.2 0.8 0.3 2.0 32.5 3041 0.387
70 9.7 1.4 1.2 0.8 0.3 2.1 36.0 3991 0.268
95 11.4 1.6 1.2 0.8 0.3 2.3 41.5 5307 0.193
120 12.9 1.6 1.4 0.8 0.3 2.4 45.0 6286 0.153
150 14.2 1.8 1.4 0.8 0.3 2.6 49.0 7567 0.124
185 16.0 2.0 1.6 0.8 0.3 2.7 54.5 9306 0.0991
240 18.2 2.2 1.6 0.8 0.3 3.0 60.5 12117 0.0754
300 20.6 2.4 1.6 0.8 0.3 3.2 66.5 14861 0.0601
600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESPVC/FSWA/PVC (IEC 60502-1)
Conductor NominalMinimumthicknessof Galv.
Steel tape
Nominal Overall MaximumThickness diameter Weight ConductorNominal No./ Diameter Thickness Thickness thickness
of ResistanceCross- Diameter of of of Inner of Galv.
mm mmmm² No./mm
of of
area (approx.) (approx.) (approx.)section of wire Conductor Insulation
Sector Shape
mm mm
cable(approx.)
cableFlat Sheath
mm
covering
mm /kmkg/km
Nominal
mm
at 20°C
Page - 43
stranded
(approx.) Steel wire
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.8 1.0 0.8 0.3 1.8 16.5 538 12.1
1.5 7 / 0.52 1.56 0.8 1.0 0.8 0.3 1.8 17.0 580 12.1
2.5 1 / 1.78 1.78 0.8 1.0 0.8 0.3 1.8 17.5 635 7.41
2.5 7 / 0.67 2.01 0.8 1.0 0.8 0.3 1.8 18.0 654 7.41
4 1 / 2.26 2.26 1.0 1.0 0.8 0.3 1.8 20.0 832 4.61
4 7 / 0.85 2.55 1.0 1.0 0.8 0.3 1.8 21.0 860 4.61
6 7 / 1.04 3.12 1.0 1.0 0.8 0.3 1.8 22.0 1022 3.08
10 7 / 1.35 4.05 1.0 1.0 0.8 0.3 1.8 25.0 1338 1.83
16 7 / 1.70 5.10 1.0 1.0 0.8 0.3 1.8 27.5 1745 1.15
25 7 / 2.13 6.39 1.2 1.0 0.8 0.3 1.8 32.0 2413 0.727
35 7 / 2.52 7.56 1.2 1.0 0.8 0.3 1.9 35.5 3066 0.524
50 19 / 1.83 9.15 1.4 1.2 0.8 0.3 2.1 41.5 4013 0.387
thicknessof Galv.
Steel tapemm kg/km /km
(approx.) (approx.)mm² No./mm mm mm mm mm mm mm
Flat Sheath cable cable at 20°Carea (approx.) (approx.) (approx.) Steel wire
of Galv. of of of Resistancesection of wire Conductor Insulation covering
Thickness diameterMinimum Weight ConductorCross- Diameter of of of Inner
Nominal No./ Diameter Thickness Thickness thickness
PVC/FSWA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall MaximumNominal
600/1000 V PVC INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLES
Page - 44
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (PVC Compound)
Inner Covering (PVC Compound)
Outer sheath (PVC Compound)
600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (PVC Compound)
up to request)
Binding tape (Manufacturer's option)
Inner Covering (PVC Compound)
Outer sheath (PVC Compound)
Page - 45
Armoured Cables
PVC/DATA/PVC (acc. to IEC 60502-1)
Double Aluminium Tape armour
PVC/DSTA/PVC (acc. to IEC 60502-1)
Filler (Polyprophylene yarn,or extruded filler
Double Galvanized Steel Tape armour
11
2
3
5
4
6
7
2
3
4
5
6
7
1
2
3
4
5
1
2
3
4
5
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 2 - PVC Insulated Cables
600/1000 V PVC INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLES
PVC/DATA/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : PVC Compound type A Operating Temperature
Inner covering : PVC Compound Maximum 70°C
Armour
Sheath : PVC Compound type ST1
: Insulation - Black
Sheath - Black
SINGLE CORE
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness Nominal Thickness diameter Weight Conductor
Cross- Diameter of of of Inner thickness of of of of Resistance
section of wire Conductor Insulation covering Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) tape (approx.) (approx.)
mm² No./mm mm mm mm mm mm mm kg/km
50 19 / 1.83 9.15 1.4 1.0 0.5 1.8 19.5 817 0.39
70 19 / 2.17 10.85 1.4 1.0 0.5 1.8 21.0 1045 0.27
95 19 / 2.52 12.60 1.6 1.0 0.5 1.8 23.5 1344 0.19
120 37 / 2.03 14.21 1.6 1.0 0.5 1.8 25.0 1607 0.15
150 37 / 2.27 15.89 1.8 1.0 0.5 1.8 27.0 1949 0.12
185 37 / 2.52 17.64 2.0 1.0 0.5 1.8 29.5 2339 0.1
240 61 / 2.26 20.34 2.2 1.0 0.5 1.9 32.5 2987 0.08
300 61 / 2.52 22.68 2.4 1.0 0.5 1.9 35.0 3628 0.06
400 61 / 2.86 25.74 2.6 1.2 0.5 2.1 39.5 4638 0.0470
500 61 / 3.20 28.80 2.8 1.2 0.5 2.2 43.5 5694 0.04
Page - 46
Armoured Cables
Uo/U - 600/1000 V
: Double Aluminium tape
Colour Ident.
Aluminium
W/km
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1 / 1.38 1.38 0.8 1.0 0.2 1.8 13.0 237 12.1
7 / 0.52 1.56 0.8 1.0 0.2 1.8 13.0 250 12.1
1 / 1.78 1.78 0.8 1.0 0.2 1.8 13.5 276 7.41
7 / 0.67 2.01 0.8 1.0 0.2 1.8 14.0 290 7.41
1 / 2.26 2.26 1.0 1.0 0.2 1.8 15.5 357 4.61
7 / 0.85 2.55 1.0 1.0 0.2 1.8 16.0 374 4.61
7 / 1.04 3.12 1.0 1.0 0.2 1.8 17.0 440 3.08
10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 19.0 574 1.83
16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 21.0 742 1.15
25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 24.5 1026 0.727
35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 27.0 1290 0.524
50 19 / 1.83 9.15 1.4 1.0 0.2 1.8 31.0 1712 0.387
70 19 / 2.17 10.85 1.4 1.0 0.2 1.9 34.0 2262 0.268
95 19 / 2.52 12.60 1.6 1.2 0.2 2.1 39.0 2896 0.193
120 37 / 2.03 14.21 1.6 1.2 0.5 2.2 43.5 3921 0.153
150 37 / 2.27 15.89 1.8 1.2 0.5 2.3 48.0 4722 0.124
185 37 / 2.52 17.64 2.0 1.4 0.5 2.4 52.5 5675 0.0991
240 61 / 2.26 20.34 2.2 1.4 0.5 2.6 58.5 7166 0.0754
300 61 / 2.52 22.68 2.4 1.6 0.5 2.8 64.5 8710 0.0601
1.5
2.5
4
1.5
2.5
4
6
Thicknessof Innercovering(approx.)
Thicknessof Galv.
Steel tape
mm mm mm kg/kmmmmmmm² No./mm mmarea (approx.) (approx.)
of of of section of wire ConductorCross- Diameter of of
Maximum
(approx.)
Weightdiameter
cable cable at 20°C(approx.)
Conductor
/km
Resistance
Conductor Nominal NominalNominal No./ Diameter Thickness
Overall
Insulation
600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)
Thickness
Sheath
Nominal
Page - 47
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1 / 1.38 1.38 0.8 1.0 0.2 1.8 13.5 270 12.1
7 / 0.52 1.56 0.8 1.0 0.2 1.8 13.5 281 12.1
1 / 1.78 1.78 0.8 1.0 0.2 1.8 14.0 318 7.41
7 / 0.67 2.01 0.8 1.0 0.2 1.8 14.5 335 7.41
1 / 2.26 2.26 1.0 1.0 0.2 1.8 16.0 420 4.61
7 / 0.85 2.55 1.0 1.0 0.2 1.8 16.5 441 4.61
7 / 1.04 3.12 1.0 1.0 0.2 1.8 18.0 530 3.08
10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 20.0 707 1.83
16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 22.0 935 1.15
25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 26.0 1328 0.727
35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 28.5 1685 0.524
50 6.8 1.4 1.0 0.2 1.9 27.0 2002 0.387
70 8.2 1.4 1.2 0.2 2.0 30.5 2724 0.268
95 9.7 1.6 1.2 0.5 2.2 36.5 4062 0.193
120 10.9 1.6 1.2 0.5 2.3 39.5 4765 0.153
150 11.9 1.8 1.4 0.5 2.4 42.5 5745 0.124
185 13.6 2.0 1.4 0.5 2.6 47.5 7055 0.0991
240 15.8 2.2 1.6 0.5 2.8 53.5 9254 0.0754
300 17.5 2.4 1.6 0.5 2.9 58.0 11299 0.0601
1.5
2.5
mm² No./mm
Three-
Segmental
Stranded
1.5
2.5
4
6
4
Thickness Thicknessof Inner of Galv.
area (approx.) (approx.)/kmmm mm
(approx.)mm mm kg/km
Sheath cablecovering Steel tape
mm mm(approx.)(approx.)
cable at 20°C
Conductor Nominal Nominal Overall Maximum
Cross-Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Resistancesection of wire Conductor Insulation
Diameter of of of of
600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)
Nominal
Page - 48
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1 / 1.38 1.38 0.8 1.0 0.2 1.8 14.0 307 12.1
7 / 0.52 1.56 0.8 1.0 0.2 1.8 14.5 322 12.1
1 / 1.78 1.78 0.8 1.0 0.2 1.8 15.0 372 7.41
7 / 0.67 2.01 0.8 1.0 0.2 1.8 15.5 390 7.41
1 / 2.26 2.26 1.0 1.0 0.2 1.8 17.5 499 4.61
7 / 0.85 2.55 1.0 1.0 0.2 1.8 18.0 524 4.61
7 / 1.04 3.12 1.0 1.0 0.2 1.8 19.0 638 3.08
10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 21.5 860 1.83
16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 24.0 1158 1.15
25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 28.0 1650 0.727
35 7 / 2.52 7.56 1.2 1.0 0.2 1.8 31.0 2120 0.524
50 8.1 1.4 1.2 0.2 2.0 31.0 2592 0.387
70 9.7 1.4 1.2 0.5 2.1 36.0 3862 0.268
95 11.4 1.6 1.2 0.5 2.3 41.0 5171 0.193
120 12.9 1.6 1.4 0.5 2.4 44.5 6122 0.153
150 14.2 1.8 1.4 0.5 2.6 49.0 7405 0.124
185 16.0 2.0 1.6 0.5 2.7 54.0 9113 0.0991
240 18.2 2.2 1.6 0.5 3.0 60.0 11899 0.0754
300 20.6 2.4 1.6 0.5 3.2 66.5 14624 0.0601
1.5
4
2.5
Segmental
Stranded
Four-
600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESPVC/DSTA/PVC (IEC 60502-1)
ConductorThickness
Cross-section
Thicknessof Inner of Galv.
Nominal Overall MaximumNominal No./ Diameter Thickness Thickness diameter Weight Conductor
Nominal
Resistancecable at 20°C
Diameter of of ofof wire Conductor Insulation covering
of of Steel tape
(approx.) (approx.)Sheath cable
(approx.) (approx.)mm² No./mm mm mm mm mm kg/kmarea (approx.)
/kmmm mm
1.5
2.5
4
6
Nominal
Page - 49
Section 2 - PVC Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : PVC Compound type A Operating Temperature Filler : Suitable material Maximum 70°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST1 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1 / 1.38 1.38 0.8 1.0 0.2 1.8 15.0 350 12.1
7 / 0.52 1.56 0.8 1.0 0.2 1.8 15.5 368 12.1
1 / 1.78 1.78 0.8 1.0 0.2 1.8 16.0 424 7.41
7 / 0.67 2.01 0.8 1.0 0.2 1.8 16.5 446 7.41
1 / 2.26 2.26 1.0 1.0 0.2 1.8 18.5 578 4.61
7 / 0.85 2.55 1.0 1.0 0.2 1.8 19.5 609 4.61
7 / 1.04 3.12 1.0 1.0 0.2 1.8 20.5 748 3.08
10 7 / 1.35 4.05 1.0 1.0 0.2 1.8 23.5 1022 1.83
16 7 / 1.70 5.10 1.0 1.0 0.2 1.8 26.0 1386 1.15
25 7 / 2.13 6.39 1.2 1.0 0.2 1.8 30.5 1991 0.727
35 7 / 2.52 7.56 1.2 1.0 0.2 1.9 34.0 2577 0.524
50 19 / 1.83 9.15 1.4 1.2 0.2 2.1 40.0 3400 0.387
1.5
4
2.5
1.5
2.5
mm²area
4
6
Nominal Maximum
600/1000 V PVC INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLES
Thickness Thickness diameter WeightNo./ Diameter Thickness Thickness ConductorCross- Diameter of of of Inner of Galv. of of of Resistancesection of wire Conductor Insulation covering Steel tape Sheath cable cable
kg/km
at 20°C(approx.) (approx.)(approx.) (approx.) (approx.)
mm mm
Nominal
PVC/DSTA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall
Page - 50
/kmmm mm mm mmNo./mm
Section 3 - XLPE Insulated Cables Unarmoured Cables
Constructions :Conductor (Annealed Copper)Insulation (XLPE Compound)Filler (Polyprophylene yarn,or extruded fillerup to request)Binding tape (Manufacturer's option)Outer sheath (PVC Compound)
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)
Page - 51
1
2
3
4
5
123
45
2
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 3 - XLPE Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Sheath : PVC Compound type ST2 Maximum 90°C Colour Ident. : Insulation - Black
Sheath - Black
SINGLE CORE
1.5 1 / 1.38 1.38 0.7 1.4 6.0 49 12.1
1.5 7 / 0.52 1.56 0.7 1.4 6.5 51 12.1
2.5 1 / 1.78 1.78 0.7 1.4 6.5 62 7.41
2.5 7 / 0.67 2.01 0.7 1.4 7.0 64 7.41
4 1 / 2.26 2.26 0.7 1.4 7.0 80 4.61
4 7 / 0.85 2.55 0.7 1.4 7.5 83 4.61
6 7 / 1.04 3.12 0.7 1.4 8.0 106 3.08
10 7 / 1.35 4.05 0.7 1.4 9.0 152 1.83
16 4.7 0.7 1.4 9.5 206 1.15
25 5.9 0.9 1.4 11.0 302 0.727
35 7.1 0.9 1.4 12.0 399 0.524
50 8.1 1.0 1.4 13.5 518 0.387
70 9.7 1.1 1.4 15.0 721 0.268
95 11.6 1.1 1.5 17.5 979 0.193
120 12.9 1.2 1.5 19.0 1212 0.153
150 14.3 1.4 1.6 21.0 1502 0.124
185 16.0 1.6 1.6 23.0 1854 0.0991
240 18.3 1.7 1.7 26.0 2406 0.0754
300 20.7 1.8 1.8 28.5 2996 0.0601
400 23.4 2.0 1.9 32.0 3799 0.0470
500 26.5 2.2 2.0 35.5 4842 0.0366
630 30.3 2.4 2.2 40.0 6233 0.0283
800 34.3 2.6 2.3 45.0 7933 0.0221
1000 127 / 3.2 41.6 2.8 2.4 53.0 10109 0.0176
Page - 52
area (approx.)
kg/km /kmmm
Compact
Resistance
(approx.) (approx.)
mm² No./mm mm
section of wire Conductor
Cross- Diameter of of
Insulation
of
Conductor Nominal Nominal Overall
Nominal No./ Diameter Thickness diameter
Sheath cable
Maximum
Weight Conductor
of of
round
stranded
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLESXLPE/PVC (IEC 60502-1)
cable at 20°C
(approx.)
mmmm
Thickness
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : XLPE Compound Operating Temperature
Filler : Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Red,Black
Sheath - Black
TWO CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section of wire Conductor Insulation Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.7 1.8 10.0 110 12.1
1.5 7 / 0.52 1.56 0.7 1.8 10.5 120 12.1
2.5 1 / 1.78 1.78 0.7 1.8 10.5 140 7.41
2.5 7 / 0.67 2.01 0.7 1.8 11.0 145 7.41
4 1 / 2.26 2.26 0.7 1.8 11.5 180 4.61
4 7 / 0.85 2.55 0.7 1.8 12.5 190 4.61
6 7 / 1.04 3.12 0.7 1.8 13.5 240 3.08
10 7 / 1.35 4.05 0.7 1.8 15.5 345 1.83
16 4.7 0.7 1.8 16.5 460 1.15
25 5.9 0.9 1.8 19.5 675 0.73
35 Compact 7.1 0.9 1.8 22.0 890 0.52
50 round 8.1 1.0 1.8 24.5 1150 0.39
70 stranded 9.7 1.1 1.8 28.0 1595 0.27
95 11.6 1.1 2.0 32.5 2170 0.19
120 12.9 1.2 2.1 35.5 2695 0.15
150 14.3 1.4 2.2 39.5 3330 0.12
185 16.0 1.6 2.3 44.0 4135 0.1
240 18.3 1.7 2.5 49.5 5360 0.08
300 20.7 1.8 2.7 55.0 6680 0.06
400 23.4 2.0 2.9 61.5 8465 0.0470
Page - 53
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : XLPE Compound Operating Temperature
Filler : Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section of wire Conductor Insulation Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.7 1.8 10.5 135 12.1
1.5 7 / 0.52 1.56 0.7 1.8 11.0 140 12.1
2.5 1 / 1.78 1.78 0.7 1.8 11.0 170 7.41
2.5 7 / 0.67 2.01 0.7 1.8 11.5 180 7.41
4 1 / 2.26 2.26 0.7 1.8 12.5 225 4.61
4 7 / 0.85 2.55 0.7 1.8 13.0 240 4.61
6 7 / 1.04 3.12 0.7 1.8 14.0 310 3.08
10 7 / 1.35 4.05 0.7 1.8 16.0 450 1.83
16 4.7 0.7 1.8 17.5 620 1.15
25 5.9 0.9 1.8 21.0 920 0.727
35 Compact 7.1 0.9 1.8 23.5 1220 0.524
50 round 8.1 1.0 1.8 26.0 1595 0.387
70 stranded 9.7 1.1 1.9 30.0 2240 0.268
95 11.6 1.1 2.0 34.5 3040 0.193
120 12.9 1.2 2.1 38.0 3790 0.153
150 14.3 1.4 2.3 42.0 4705 0.124
185 16.0 1.6 2.4 47.5 5845 0.0991
240 18.3 1.7 2.6 53.0 7595 0.0754
300 20.7 1.8 2.8 59.0 9470 0.0601
400 23.4 2.0 3.1 66.5 12055 0.0470
Page - 54
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : XLPE Compound Operating Temperature
Filler : Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section of wire Conductor Insulation Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.7 1.8 11.0 160 12.1
1.5 7 / 0.52 1.56 0.7 1.8 11.5 165 12.1
2.5 1 / 1.78 1.78 0.7 1.8 12.0 210 7.41
2.5 7 / 0.67 2.01 0.7 1.8 12.5 220 7.41
4 1 / 2.26 2.26 0.7 1.8 13.5 280 4.61
4 7 / 0.85 2.55 0.7 1.8 14.0 290 4.61
6 7 / 1.04 3.12 0.7 1.8 15.0 385 3.08
10 7 / 1.35 4.05 0.7 1.8 17.5 570 1.83
16 4.7 0.7 1.8 19.0 790 1.15
25 5.9 0.9 1.8 23.0 1180 0.727
35 Compact 7.1 0.9 1.8 26.0 1575 0.524
50 round 8.1 1.0 1.9 29.0 2075 0.387
70 stranded 9.7 1.1 2.0 33.5 2925 0.268
95 11.6 1.1 2.1 38.5 3980 0.193
120 12.9 1.2 2.3 42.5 4980 0.153
150 14.3 1.4 2.4 47.0 6160 0.124
185 16.0 1.6 2.6 53.0 7680 0.0991
240 18.3 1.7 2.8 59.0 9975 0.0754
300 20.7 1.8 3.0 66.0 12440 0.0601
Page - 55
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2)
Insulation : XLPE Compound Operating Temperature
Filler : Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Black with numbering code
Sheath - Black
FIVE CORES
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of of of Resistance
section of wire Conductor Insulation Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
1.5 1 / 1.38 1.38 0.7 1.8 12.0 185 12.1
1.5 7 / 0.52 1.56 0.7 1.8 12.5 195 12.1
2.5 1 / 1.78 1.78 0.7 1.8 13.0 245 7.41
2.5 7 / 0.67 2.01 0.7 1.8 13.5 255 7.41
4 1 / 2.26 2.26 0.7 1.8 14.5 335 4.61
4 7 / 0.85 2.55 0.7 1.8 15.0 350 4.61
6 7 / 1.04 3.12 0.7 1.8 16.5 465 3.08
10 7 / 1.35 4.05 0.7 1.8 19.5 690 1.83
16 Compact 4.7 0.7 1.8 21.0 965 1.15
25 round 5.9 0.9 1.8 25.0 1450 0.727
35 stranded 7.1 0.9 1.8 28.5 1940 0.524
50 8.1 1.0 2.0 32.0 2575 0.387
Page - 56
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
Insulation : XLPE Compound Operating Temperature
Filler (if necessary): Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 1.5 mm² (Solid conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 1.5 1 / 1.38 1.38 0.7 1.8 13.0 210 12.1
7 1.5 1 / 1.38 1.38 0.7 1.8 13.0 225 12.1
8 1.5 1 / 1.38 1.38 0.7 1.8 14.0 250 12.1
9 1.5 1 / 1.38 1.38 0.7 1.8 14.5 280 12.1
10 1.5 1 / 1.38 1.38 0.7 1.8 16.0 310 12.1
12 1.5 1 / 1.38 1.38 0.7 1.8 16.5 350 12.1
14 1.5 1 / 1.38 1.38 0.7 1.8 17.0 395 12.1
15 1.5 1 / 1.38 1.38 0.7 1.8 17.5 415 12.1
16 1.5 1 / 1.38 1.38 0.7 1.8 18.0 440 12.1
18 1.5 1 / 1.38 1.38 0.7 1.8 19.0 480 12.1
19 1.5 1 / 1.38 1.38 0.7 1.8 19.0 495 12.1
20 1.5 1 / 1.38 1.38 0.7 1.8 19.5 520 12.1
24 1.5 1 / 1.38 1.38 0.7 1.8 22.0 620 12.1
30 1.5 1 / 1.38 1.38 0.7 1.8 23.0 740 12.1
32 1.5 1 / 1.38 1.38 0.7 1.8 23.5 780 12.1
37 1.5 1 / 1.38 1.38 0.7 1.8 25.0 880 12.1
40 1.5 1 / 1.38 1.38 0.7 1.8 26.0 945 12.1
50 1.5 1 / 1.38 1.38 0.7 1.9 28.5 1150 12.1
52 1.5 1 / 1.38 1.38 0.7 1.9 29.5 1210 12.1
60 1.5 1 / 1.38 1.38 0.7 1.9 31.0 1375 12.1
61 1.5 1 / 1.38 1.38 0.7 1.9 31.0 1390 12.1
Page - 57
Unarmoured Cables
(to IEC 60228 clas 1) Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
Insulation : XLPE Compound Operating Temperature
Filler (if necessary): Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 1.5 mm² (Stranded conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 1.5 7 / 0.52 1.56 0.7 1.8 13.5 220 12.1
7 1.5 7 / 0.52 1.56 0.7 1.8 13.5 235 12.1
8 1.5 7 / 0.52 1.56 0.7 1.8 14.5 265 12.1
9 1.5 7 / 0.52 1.56 0.7 1.8 15.5 295 12.1
10 1.5 7 / 0.52 1.56 0.7 1.8 16.5 325 12.1
12 1.5 7 / 0.52 1.56 0.7 1.8 17.0 365 12.1
14 1.5 7 / 0.52 1.56 0.7 1.8 18.0 415 12.1
15 1.5 7 / 0.52 1.56 0.7 1.8 18.5 435 12.1
16 1.5 7 / 0.52 1.56 0.7 1.8 19.0 460 12.1
18 1.5 7 / 0.52 1.56 0.7 1.8 20.0 505 12.1
19 1.5 7 / 0.52 1.56 0.7 1.8 20.0 520 12.1
20 1.5 7 / 0.52 1.56 0.7 1.8 20.5 545 12.1
24 1.5 7 / 0.52 1.56 0.7 1.8 23.0 650 12.1
30 1.5 7 / 0.52 1.56 0.7 1.8 24.5 775 12.1
32 1.5 7 / 0.52 1.56 0.7 1.8 25.0 815 12.1
37 1.5 7 / 0.52 1.56 0.7 1.8 26.5 920 12.1
40 1.5 7 / 0.52 1.56 0.7 1.8 27.5 990 12.1
50 1.5 7 / 0.52 1.56 0.7 1.9 30.0 1205 12.1
52 1.5 7 / 0.52 1.56 0.7 1.9 31.0 1265 12.1
60 1.5 7 / 0.52 1.56 0.7 1.9 33.0 1435 12.1
61 1.5 7 / 0.52 1.56 0.7 1.9 33.0 1455 12.1
Page - 58
Unarmoured Cables
(to IEC 60228 clas 2) Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1)
Insulation : XLPE Compound Operating Temperature
Filler (if necessary): Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 2.5 mm² (Solid conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 2.5 1 / 1.78 1.78 0.7 1.8 14.0 280 7.41
7 2.5 1 / 1.78 1.78 0.7 1.8 14.0 300 7.41
8 2.5 1 / 1.78 1.78 0.7 1.8 15.0 340 7.41
9 2.5 1 / 1.78 1.78 0.7 1.8 16.0 385 7.41
10 2.5 1 / 1.78 1.78 0.7 1.8 17.5 425 7.41
12 2.5 1 / 1.78 1.78 0.7 1.8 18.0 485 7.41
14 2.5 1 / 1.78 1.78 0.7 1.8 19.0 550 7.41
15 2.5 1 / 1.78 1.78 0.7 1.8 19.5 580 7.41
16 2.5 1 / 1.78 1.78 0.7 1.8 20.0 615 7.41
18 2.5 1 / 1.78 1.78 0.7 1.8 21.0 675 7.41
19 2.5 1 / 1.78 1.78 0.7 1.8 21.0 700 7.41
20 2.5 1 / 1.78 1.78 0.7 1.8 21.5 735 7.41
24 2.5 1 / 1.78 1.78 0.7 1.8 24.5 875 7.41
30 2.5 1 / 1.78 1.78 0.7 1.8 25.5 1055 7.41
32 2.5 1 / 1.78 1.78 0.7 1.8 26.0 1120 7.41
37 2.5 1 / 1.78 1.78 0.7 1.8 27.5 1265 7.41
40 2.5 1 / 1.78 1.78 0.7 1.9 29.0 1375 7.41
50 2.5 1 / 1.78 1.78 0.7 2.0 32.0 1685 7.41
52 2.5 1 / 1.78 1.78 0.7 2.0 33.0 1765 7.41
60 2.5 1 / 1.78 1.78 0.7 2.0 35.0 2010 7.41
61 2.5 1 / 1.78 1.78 0.7 2.0 35.0 2040 7.41
Page - 59
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED AND PVC SHEATHED CABLES
XLPE/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : XLPE Compound Operating Temperature
Filler (if necessary): Suitable material Maximum 90°C
Sheath : PVC Compound type ST2
: Insulation - Black with numbering code
Sheath - Black
CONTROL CABLE : 2.5 mm² (Stranded conductor)
Conductor Nominal Nominal Overall Maximum
No Nominal No./ Diameter Thickness Thickness diameter Weight Conductor
of Cross-section Diameter of of of of of Resistance
core area of wire Conductor Insulation Sheath cable cable at 20°C
(approx.) (approx.) (approx.) (approx.)
mm² No./mm mm mm mm mm kg/km
6 2.5 7 / 0.67 2.01 0.7 1.8 14.5 290 7.41
7 2.5 7 / 0.67 2.01 0.7 1.8 14.5 315 7.41
8 2.5 7 / 0.67 2.01 0.7 1.8 16.0 355 7.41
9 2.5 7 / 0.67 2.01 0.7 1.8 17.0 400 7.41
10 2.5 7 / 0.67 2.01 0.7 1.8 18.5 440 7.41
12 2.5 7 / 0.67 2.01 0.7 1.8 19.0 505 7.41
14 2.5 7 / 0.67 2.01 0.7 1.8 20.0 570 7.41
15 2.5 7 / 0.67 2.01 0.7 1.8 20.5 605 7.41
16 2.5 7 / 0.67 2.01 0.7 1.8 21.0 640 7.41
18 2.5 7 / 0.67 2.01 0.7 1.8 22.0 705 7.41
19 2.5 7 / 0.67 2.01 0.7 1.8 22.0 725 7.41
20 2.5 7 / 0.67 2.01 0.7 1.8 22.5 765 7.41
24 2.5 7 / 0.67 2.01 0.7 1.8 25.5 915 7.41
30 2.5 7 / 0.67 2.01 0.7 1.8 27.0 1100 7.41
32 2.5 7 / 0.67 2.01 0.7 1.8 27.5 1165 7.41
37 2.5 7 / 0.67 2.01 0.7 1.8 29.0 1315 7.41
40 2.5 7 / 0.67 2.01 0.7 1.9 30.5 1430 7.41
50 2.5 7 / 0.67 2.01 0.7 2.0 33.5 1755 7.41
52 2.5 7 / 0.67 2.01 0.7 2.0 34.5 1840 7.41
60 2.5 7 / 0.67 2.01 0.7 2.0 36.5 2095 7.41
61 2.5 7 / 0.67 2.01 0.7 2.0 36.5 2120 7.41
Page - 60
Unarmoured Cables
Uo/U - 600/1000 V
Colour Ident.
W/km
Section 3 - XLPE Insulated Cables Unarmoured Cables
Constructions :Conductor (Annealed Copper)Insulation (XLPE Compound)Filler (Polyprophylene yarn,or extruded fillerup to request)Binding tape (Manufacturer's option)Copper Tape screenBinding tape (Manufacturer's option)Outer sheath (PVC Compound)
600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)
Page - 61
1
2
3
6
7
4
123
4
567
5
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Copper wire screen.* Polyethylene / Low smoke Halogen Free sheathed
Section 3 - XLPE Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.7 0.1 1.8 10.0 125 12.1
1.5 7 / 0.52 1.56 0.7 0.1 1.8 10.5 131 12.1
2.5 1 / 1.78 1.78 0.7 0.1 1.8 11.0 155 7.41
2.5 7 / 0.67 2.01 0.7 0.1 1.8 11.5 162 7.41
4 1 / 2.26 2.26 0.7 0.1 1.8 12.0 200 4.61
4 7 / 0.85 2.55 0.7 0.1 1.8 12.5 209 4.61
6 1 / 2.77 2.77 0.7 0.1 1.8 13.0 250 3.08
6 7 / 1.04 3.12 0.7 0.1 1.8 13.5 261 3.08
10 7 / 1.35 4.05 0.7 0.1 1.8 15.5 369 1.83
16 4.7 0.7 0.1 1.8 16.5 489 1.15
25 5.9 0.9 0.1 1.8 20.0 712 0.727
35 7.1 0.9 0.1 1.8 22.5 934 0.524
50 8.1 1.0 0.1 1.8 24.5 1196 0.387
70 9.7 1.1 0.1 1.9 28.5 1648 0.268
95 11.6 1.1 0.1 2.0 32.5 2226 0.193
120 12.9 1.2 0.1 2.1 35.5 2753 0.153
150 14.3 1.4 0.1 2.2 39.5 3394 0.124
185 16.0 1.6 0.1 2.3 44.0 4205 0.0991
240 18.3 1.7 0.1 2.5 49.5 5425 0.0754
300 20.7 1.8 0.1 2.7 55.0 6752 0.0601
400 23.4 2.0 0.1 2.9 61.5 8543 0.0470
round
mm
cable
kg/km
Page - 62
mm mm
Sheath
mm
Insulation
(approx.)
Copper tape
Resistance
(approx.)
at 20°Ccable
of
stranded
/km
Conductorsection area of wire
(approx.) (approx.)
mm² No./mm
Compact
600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES
Diameter
Nominal
Thickness
Overall
diameter
Conductor Maximum
Conductor
Nominal
No./
Diameter
Thickness
Nominal
Thickness
of ofof
mm
XLPE/PVC-S (IEC 60502-1)
Nominal Weight
ofofCross-
(approx.)
Section 3 - XLPE Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow , Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.7 0.1 1.8 10.5 149 12.1
1.5 7 / 0.52 1.56 0.7 0.1 1.8 11.0 155 12.1
2.5 1 / 1.78 1.78 0.7 0.1 1.8 11.5 186 7.41
2.5 7 / 0.67 2.01 0.7 0.1 1.8 12.0 195 7.41
4 1 / 2.26 2.26 0.7 0.1 1.8 12.5 246 4.61
4 7 / 0.85 2.55 0.7 0.1 1.8 13.0 257 4.61
6 1 / 2.77 2.77 0.7 0.1 1.8 13.5 318 3.08
6 7 / 1.04 3.12 0.7 0.1 1.8 14.0 330 3.08
10 7 / 1.35 4.05 0.7 0.1 1.8 16.5 478 1.83
16 4.7 0.7 0.1 1.8 17.5 650 1.15
25 5.9 0.9 0.1 1.8 21.0 959 0.727
35 7.1 0.9 0.1 1.8 23.5 1273 0.524
50 8.1 1.0 0.1 1.8 26.5 1642 0.387
70 9.7 1.1 0.1 1.9 30.0 2282 0.268
95 11.6 1.1 0.1 2.0 34.5 3106 0.193
120 12.9 1.2 0.1 2.2 38.0 3868 0.153
150 14.3 1.4 0.1 2.3 42.0 4775 0.124
185 16.0 1.6 0.1 2.4 47.0 5907 0.0991
240 18.3 1.7 0.1 2.6 53.0 7673 0.0754
300 20.7 1.8 0.1 2.8 59.0 9561 0.0601
400 23.4 2.0 0.1 3.1 66.0 12110 0.0470
Compact
(approx.)
mm
round
No./mm
stranded
(approx.) (approx.)
Thickness
of
Copper tape
(approx.)
cable
of
at 20°Csection area of wire Conductor Insulation Sheath cable
600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLES
Cross- Diameter of of of Resistance
Nominal MaximumConductor Nominal
XLPE/PVC-S (IEC 60502-1)
Nominal Overall
mm²
(approx.)
Thickness diameterNo./ Diameter ThicknessNominal
mm /kmkg/kmmm mm
Weight Conductor
of
mm
Page - 63
Section 3 - XLPE Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow , Blue , Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.7 0.1 1.8 11.5 173 12.1
1.5 7 / 0.52 1.56 0.7 0.1 1.8 12.0 182 12.1
2.5 1 / 1.78 1.78 0.7 0.1 1.8 12.5 228 7.41
2.5 7 / 0.67 2.01 0.7 0.1 1.8 13.0 237 7.41
4 1 / 2.26 2.26 0.7 0.1 1.8 13.5 300 4.61
4 7 / 0.85 2.55 0.7 0.1 1.8 14.0 318 4.61
6 1 / 2.77 2.77 0.7 0.1 1.8 14.5 394 3.08
6 7 / 1.04 3.12 0.7 0.1 1.8 15.5 409 3.08
10 7 / 1.35 4.05 0.7 0.1 1.8 18.0 598 1.83
16 4.7 0.7 0.1 1.8 19.5 823 1.15
25 5.9 0.9 0.1 1.8 23.0 1227 0.727
35 7.1 0.9 0.1 1.8 26.0 1632 0.524
50 8.1 1.0 0.1 1.9 29.0 2120 0.387
70 9.7 1.1 0.1 2.0 33.5 2976 0.268
95 11.6 1.1 0.1 2.2 38.5 4073 0.193
120 12.9 1.2 0.1 2.3 42.5 5052 0.153
150 14.3 1.4 0.1 2.5 47.0 6243 0.124
185 16.0 1.6 0.1 2.6 52.5 7751 0.0991
240 18.3 1.7 0.1 2.8 59.0 10066 0.0754
300 20.7 1.8 0.1 3.0 65.5 12547 0.0601
400 23.4 2.0 0.1 3.3 73.5 15898 0.0470
Compact
round
stranded
(approx.)
Thickness
(approx.) (approx.) (approx.)
Conductor Nominal Nominal
of
Copper tape
diameterThickness Weight
cable
kg/km /kmmmmm² No./mm mm mm mmmm
Thickness
Resistance
at 20°Csection area of wire Conductor Insulation Sheath cable
Diameter of of of of of
600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)
Page - 64
No./ DiameterNominal
(approx.)
Overall MaximumNominal
Conductor
Cross-
Section 3 - XLPE Insulated Cables Unarmoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Metallic screen : Annealed Copper tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.7 0.1 1.8 12.0 204 12.1
1.5 7 / 0.52 1.56 0.7 0.1 1.8 12.5 214 12.1
2.5 1 / 1.78 1.78 0.7 0.1 1.8 13.5 265 7.41
2.5 7 / 0.67 2.01 0.7 0.1 1.8 14.0 276 7.41
4 1 / 2.26 2.26 0.7 0.1 1.8 14.5 360 4.61
4 7 / 0.85 2.55 0.7 0.1 1.8 15.5 376 4.61
6 1 / 2.77 2.77 0.7 0.1 1.8 16.0 471 3.08
6 7 / 1.04 3.12 0.7 0.1 1.8 17.0 488 3.08
10 7 / 1.35 4.05 0.7 0.1 1.8 19.5 720 1.83
16 4.7 0.7 0.1 1.8 21.0 1005 1.15
25 5.9 0.9 0.1 1.8 25.5 1491 0.727
35 7.1 0.9 0.1 1.9 28.5 2005 0.524
50 8.1 1.0 0.1 2.0 32.0 2620 0.387
(approx.)
round
No./
(approx.)
600/1000 V XLPE INSULATED, METALLIC SCREENED AND PVC SHEATHED CABLESXLPE/PVC-S (IEC 60502-1)
Nominal
Compact
Copper tape
mm
Cross- Diameter of
Nominal
stranded
Conductor
mm² No./mm mm
cable at 20°C
of Resistance
Weight
of
Thickness
Overall Maximum
Conductor
Sheath cable
Thickness diameter
(approx.)
mm mm kg/km /kmmm
section area of wire Conductor Insulation
(approx.)
of
Diameter Thickness
Nominal Nominal
of of
Page - 65
(approx.)
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (XLPE Compound)
Inner Covering (PVC Compound)
Binding tape (Manufacturer's option)
Outer sheath (PVC Compound)
600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (XLPE Compound)
up to request)
Binding tape (Manufacturer's option)
Inner Covering (PVC Compound)
Binding tape (Manufacturer's option)
Outer sheath (PVC Compound)
Page - 66
Armoured Cables
XLPE/AWA/PVC (acc. to IEC 60502-1)
Round Aluminium Wire armour
XLPE/SWA/PVC (acc. to IEC 60502-1)
Filler (Polyprophylene yarn,or extruded filler
Galvanized Round Steel Wire armour
1
2
3
4
5
6
7
1
2
3
4
5
1
2
3
4
6
1
2
3
5
4
6
7
88
6
5
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED, ALUMINIUM WIRE ARMOURED AND PVC SHEATHED CABLES
XLPE/AWA/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : XLPE Compound Operating Temperature
Inner covering : PVC Compound Maximum 90°C
Armour
Sheath : PVC Compound type ST2
: Insulation - Black
Sheath - Black
SINGLE CORE
Conductor Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness Nominal Thickness diameter Weight Conductor
Cross- Diameter of of of Inner diameter of of of of Resistance
section of wire Conductor Insulation covering Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) wire (approx.) (approx.)
mm² No./mm mm mm mm mm mm mm kg/km
16 4.7 0.7 1.0 0.8 1.8 13.5 325 1.15
25 5.9 0.9 1.0 0.8 1.8 15.5 435 0.73
35 7.1 0.9 1.0 0.8 1.8 16.5 545 0.52
50 8.1 1.0 1.0 1.25 1.8 18.5 715 0.39
70 9.7 1.1 1.0 1.25 1.8 20.0 940 0.27
95 11.6 1.1 1.0 1.25 1.8 22.0 1215 0.19
120 12.9 1.2 1.0 1.6 1.8 24.5 1565 0.15
150 Compact 14.3 1.4 1.0 1.6 1.8 26.5 1865 0.12
185 round 16.0 1.6 1.0 1.6 1.8 28.5 2270 0.1
240 stranded 18.3 1.7 1.0 1.6 1.9 31.0 2860 0.08
300 20.7 1.8 1.0 1.6 1.9 34.0 3490 0.06
400 23.4 2.0 1.2 2.0 2.1 38.5 4385 0.0470
500 26.5 2.2 1.2 2.0 2.2 42.0 5485 0.04
630 30.3 2.4 1.2 2.0 2.3 46.5 6930 0.03
800 34.3 2.6 1.4 2.5 2.5 52.5 8915 0.02
1000 Round stranded 41.6 2.8 1.4 2.5 2.5 60.5 11315 0.02
Page - 67
Armoured Cables
Uo/U - 600/1000 V
: Aluminium Wire
Colour Ident.
Aluminium
W/km
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 13.5 314 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 14.0 325 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 14.5 355 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 15.0 372 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 15.5 422 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 16.0 437 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 1.8 16.5 485 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 1.8 17.0 511 3.08
10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 20.0 757 1.83
16 4.7 0.7 1.0 1.25 1.8 21.0 907 1.15
25 5.9 0.9 1.0 1.6 1.8 25.0 1342 0.727
35 7.1 0.9 1.0 1.6 1.8 27.5 1630 0.524
50 8.1 1.0 1.0 1.6 1.8 30.0 1965 0.387
70 9.7 1.1 1.0 1.6 2.0 34.0 2549 0.268
95 11.6 1.1 1.2 2.0 2.1 39.0 3517 0.193
120 12.9 1.2 1.2 2.0 2.2 42.0 4159 0.153
150 14.3 1.4 1.2 2.0 2.3 46.0 4966 0.124
185 16.0 1.6 1.4 2.5 2.5 52.0 6435 0.0991
240 18.3 1.7 1.4 2.5 2.7 57.5 7894 0.0754
300 20.7 1.8 1.6 2.5 2.8 63.0 9543 0.0601
of Inner
covering
(approx.)
Nominal
diameter
of
Steel wire
Compact
round
stranded
mm mm mm kg/kmmmmm
of
section of wire Conductor
mm² No./mm mm
area (approx.) (approx.)
Maximum
(approx.)
Insulation
Conductor
Cross- Diameter of of of of
Nominal No./ Diameter Thickness
Overall
Thickness Weightdiameter
cable cable at 20°C
(approx.)
/km
Resistance
600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)
Thickness
Sheath
Conductor Nominal Nominal
Page - 68
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 14.0 343 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 14.5 360 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 15.0 398 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 15.5 417 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 16.0 474 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 17.0 502 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 1.8 17.0 570 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 1.8 18.0 591 3.08
10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 20.5 887 1.83
16 4.7 0.7 1.0 1.25 1.8 22.0 1087 1.15
25 5.9 0.9 1.0 1.6 1.8 26.5 1622 0.727
35 7.1 0.9 1.0 1.6 1.8 29.0 2015 0.524
50 8.1 1.0 1.0 1.6 1.9 31.5 2461 0.387
70 9.7 1.1 1.2 2.0 2.0 37.0 3522 0.268
95 11.6 1.1 1.2 2.0 2.2 41.5 4491 0.193
120 12.9 1.2 1.2 2.0 2.3 45.0 5381 0.153
150 14.3 1.4 1.4 2.5 2.5 50.0 6919 0.124
185 16.0 1.6 1.4 2.5 2.6 55.0 8285 0.0991
240 18.3 1.7 1.6 2.5 2.8 61.5 10398 0.0754
300 20.7 1.8 1.6 2.5 3.0 67.5 12550 0.0601
/km
Compact
round
stranded
mm mm
(approx.)
mm² No./mm mm mm mm mm kg/km
area (approx.) (approx.) (approx.)
Sheath cablecovering of
(approx.) Steel wire
cable at 20°C
Conductor Nominal Nominal Overall Maximum
Thickness diameter Weight ConductorNominal No./ Diameter Thickness Thickness Nominal
of ResistanceCross- Diameter of of of Inner diameter
section of wire Conductor Insulation
of of
600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)
Page - 69
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 15.0 384 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 15.5 398 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 16.0 455 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 16.5 471 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 1.8 17.0 550 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 1.8 18.0 575 4.61
6 7 / 2.77 2.77 0.7 1.0 1.25 1.8 19.0 755 3.08
6 7 / 1.04 3.12 0.7 1.0 1.25 1.8 19.5 792 3.08
10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 22.0 1039 1.83
16 4.7 0.7 1.0 1.25 1.8 23.5 1292 1.15
25 5.9 0.9 1.0 1.6 1.8 28.5 1955 0.727
35 7.1 0.9 1.0 1.6 1.9 31.5 2440 0.524
50 8.1 1.0 1.0 1.6 2.0 34.5 3039 0.387
70 9.7 1.1 1.2 2.0 2.2 40.5 4345 0.268
95 11.6 1.1 1.2 2.0 2.3 45.0 5577 0.193
120 12.9 1.2 1.4 2.5 2.5 50.0 7191 0.153
150 14.3 1.4 1.4 2.5 2.6 55.0 8600 0.124
185 16.0 1.6 1.4 2.5 2.8 60.5 10388 0.0991
240 18.3 1.7 1.6 2.5 3.0 67.5 13059 0.0754
300 20.7 1.8 1.6 2.5 3.2 74.0 15807 0.0601
600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall Maximum
Thickness diameter Weight ConductorNominal No./ Diameter Thickness Thickness Nominal
of of of ResistanceCross- Diameter of of of Inner diameter
section of wire Conductor Insulation covering of Sheath cable
(approx.) Steel wire
cable at 20°C
mm kg/km
area (approx.) (approx.) (approx.)
round
stranded
mm mm
(approx.)
mm² No./mm mm mm mm
Page - 70
/km
Compact
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Steel Wire Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 1.8 16.0 427 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 1.8 16.5 447 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 1.8 17.0 510 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 1.8 17.5 531 7.41
4 1 / 2.26 2.26 0.7 1.0 1.25 1.8 19.0 727 4.61
4 7 / 0.85 2.55 0.7 1.0 1.25 1.8 19.5 763 4.61
6 1 / 2.77 2.77 0.7 1.0 1.25 1.8 20.5 905 3.08
6 7 / 1.04 3.12 0.7 1.0 1.25 1.8 21.0 908 3.08
10 7 / 1.35 4.05 0.7 1.0 1.25 1.8 24.0 1203 1.83
16 4.7 0.7 1.0 1.6 1.8 26.5 1666 1.15
25 5.9 0.9 1.0 1.6 1.8 30.5 2290 0.727
35 7.1 0.9 1.0 1.6 1.9 34.0 2878 0.524
50 8.1 1.0 1.2 2.0 2.1 39.0 3920 0.387
/km
stranded
mm mm mm mm
Compact
(approx.)
mm² No./mm mm mm
round
kg/km
Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) Steel wire (approx.)
of of of Resistance
section of wire Conductor Insulation covering of
Thickness diameter Weight Conductor
Cross- Diameter of of of Inner diameter
Nominal No./ Diameter Thickness Thickness Nominal
600/1000 V XLPE INSULATED, STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/SWA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall Maximum
Page - 71
Section 3 - XLPE Insulated Cables Armoured Cables
Conductor (Annealed Copper) Insulation (XLPE Compound) Filler (Polyprophylene yarn,or extruded filler up to request) Binding tape (Manufacturer's option) Inner Covering (PVC Compound) Galvanized Flat Steel Wire armour Galvanized Steel Tape binding Outer sheath (PVC Compound)
Page - 72
600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (acc. to IEC 60502-1)
1
2
3
4
5
6
7
8
123
45678
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 14.0 365 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 14.0 398 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 14.5 426 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 15.0 434 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 15.5 502 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 16.0 514 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 16.5 575 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 17.0 598 3.08
10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 19.0 744 1.83
16 4.7 0.7 1.0 0.8 0.3 1.8 20.5 896 1.15
25 5.9 0.9 1.0 0.8 0.3 1.8 23.5 1187 0.727
35 7.1 0.9 1.0 0.8 0.3 1.8 26.0 1472 0.524
50 8.1 1.0 1.0 0.8 0.3 1.8 28.5 1804 0.387
70 9.7 1.1 1.0 0.8 0.3 1.9 32.0 2328 0.268
95 11.6 1.1 1.2 0.8 0.3 2.0 36.5 3031 0.193
120 12.9 1.2 1.2 0.8 0.3 2.1 39.5 3635 0.153
150 14.3 1.4 1.2 0.8 0.3 2.2 43.5 4381 0.124
185 16.0 1.6 1.4 0.8 0.3 2.4 48.5 5342 0.0991
240 18.3 1.7 1.4 0.8 0.3 2.6 54.0 6724 0.0754
300 20.7 1.8 1.6 0.8 0.3 2.7 60.0 8222 0.0601
400 23.4 2.0 1.6 0.8 0.3 3.0 66.5 10210 0.0470
Page - 73
Compact
round
stranded
Minimum
thickness
of Galv.
Steel tape
mm
Steel wire
Thickness
of Inner
covering
(approx.)
mm mm mm kg/kmmmmmmm² No./mm mm
area (approx.) (approx.)
section of wire Conductor
ofCross- Diameter of
Overall Maximum
(approx.)
Conductor
at 20°C
(approx.)
of of
/km
Resistance
Weightdiameter
cable cable
Nominal
Nominal No./ Thickness
Sheath
Thickness
Insulation
of
thickness
of Galv.
Flat
Diameter
Nominal
600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)
Conductor Nominal
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 14.5 418 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 14.5 426 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 15.0 460 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 15.5 497 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 16.0 551 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 17.0 593 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 17.5 665 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 18.0 671 3.08
10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 20.0 884 1.83
16 4.7 0.7 1.0 0.8 0.3 1.8 21.5 1087 1.15
25 5.9 0.9 1.0 0.8 0.3 1.8 25.0 1466 0.727
35 7.1 0.9 1.0 0.8 0.3 1.8 27.5 1841 0.524
50 8.1 1.0 1.0 0.8 0.3 1.8 30.0 2285 0.387
70 9.7 1.1 1.2 0.8 0.3 2.0 34.5 3070 0.268
95 11.6 1.1 1.2 0.8 0.3 2.1 39.0 3989 0.193
120 12.9 1.2 1.2 0.8 0.3 2.2 42.0 4816 0.153
150 14.3 1.4 1.4 0.8 0.3 2.3 46.5 5871 0.124
185 16.0 1.6 1.4 0.8 0.3 2.4 52.0 7162 0.0991
240 18.3 1.7 1.6 0.8 0.3 2.7 58.0 9123 0.0754
300 20.7 1.8 1.6 0.8 0.3 2.8 64.0 11130 0.0601
Page - 74
Compact
600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)
/kmmm
(approx.)
mm²
Minimum
thickness
of Galv.
round
stranded
mm mmNo./mm mm mm kg/km
area (approx.) (approx.) (approx.)(approx.) Steel wire Steel tape
Sheath cablecovering Flat
mm mm
cable at 20°C
Conductor Nominal Nominal Overall
Thickness thickness
of Inner
Maximum
Cross- Diameter of of
Nominal No./ Diameter Thickness
of of Resistanceof Galv.
diameter Weight Conductor
section of wire Conductor Insulation
of
Thickness
Nominal
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 15.0 446 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 15.5 483 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 16.0 532 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 16.5 544 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 17.0 637 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 18.0 659 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 18.5 645 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 19.0 783 3.08
10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 21.5 1039 1.83
16 4.7 0.7 1.0 0.8 0.3 1.8 23.0 1295 1.15
25 5.9 0.9 1.0 0.8 0.3 1.8 27.0 1795 0.727
35 7.1 0.9 1.0 0.8 0.3 1.8 30.0 2263 0.524
50 8.1 1.0 1.0 0.8 0.3 1.9 32.5 2830 0.387
70 9.7 1.1 1.2 0.8 0.3 2.1 38.0 3838 0.268
95 11.6 1.1 1.2 0.8 0.3 2.2 42.5 5013 0.193
120 12.9 1.2 1.4 0.8 0.3 2.3 47.0 6144 0.153
150 14.3 1.4 1.4 0.8 0.3 2.5 51.5 7450 0.124
185 16.0 1.6 1.4 0.8 0.3 2.7 57.5 9123 0.0991
240 18.3 1.7 1.6 0.8 0.3 2.9 64.0 11666 0.0754
300 20.7 1.8 1.6 0.8 0.3 3.1 70.5 14268 0.0601
Page - 75
600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)
Minimum
thickness
of Galv.
Steel tape
Maximum
Nominal
Conductor Nominal
Thickness thickness
Nominal Overall
Weight Conductor
Cross- Diameter of of
No./ Diameter Thickness Thickness
of wire Conductor Insulation covering
of Inner of Galv.
mm² No./mm
cable
area (approx.) (approx.) (approx.) (approx.)
mm
section
stranded
mm mmmm mm
Compact
Nominal
mm
at 20°CFlat Sheath cable
of of of
diameter
mm /kmkg/km
Resistance
(approx.) Steel wire
round
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 1 or 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : XLPE Compound Armour : Galvanized Flat Steel Wire+Steel tape open helix Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.8 0.3 1.8 16.0 508 12.1
1.5 7 / 0.52 1.56 0.7 1.0 0.8 0.3 1.8 16.5 520 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.8 0.3 1.8 17.0 601 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.8 0.3 1.8 17.5 615 7.41
4 1 / 2.26 2.26 0.7 1.0 0.8 0.3 1.8 18.5 730 4.61
4 7 / 0.85 2.55 0.7 1.0 0.8 0.3 1.8 19.0 750 4.61
6 1 / 2.77 2.77 0.7 1.0 0.8 0.3 1.8 20.0 875 3.08
6 7 / 1.04 3.12 0.7 1.0 0.8 0.3 1.8 20.5 897 3.08
10 7 / 1.35 4.05 0.7 1.0 0.8 0.3 1.8 23.0 1196 1.83
16 4.7 0.7 1.0 0.8 0.3 1.8 25.0 1512 1.15
25 5.9 0.9 1.0 0.8 0.3 1.8 29.0 2100 0.727
35 7.1 0.9 1.0 0.8 0.3 1.9 32.5 2700 0.524
50 8.1 1.0 1.2 0.8 0.3 2.0 36.0 3432 0.387
Page - 76
round
stranded
Compact
600/1000 V XLPE INSULATED, FLAT STEEL WIRE ARMOURED AND PVC SHEATHED CABLESXLPE/FSWA/PVC (IEC 60502-1)
NominalConductor Nominal Nominal Overall Maximum
Steel tape
mm
thickness
kg/km /km
(approx.)
of Galv.
mm² No./mm mm mm mm mm mm mm
Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) Steel wire (approx.)
of of of Resistance
section of wire Conductor Insulation covering Flat
Thickness thickness Weight Conductor
Cross- Diameter of of of Inner of Galv.
Thickness diameterMinimumNominal No./ Diameter Thickness
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (XLPE Compound)
Inner Covering (PVC Compound)
Outer sheath (PVC Compound)
600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLES
Constructions :
Conductor (Annealed Copper)
Insulation (XLPE Compound)
up to request)
Binding tape (Manufacturer's option)
Inner Covering (PVC Compound)
Outer sheath (PVC Compound)
Page - 77
Armoured Cables
XLPE/DATA/PVC (acc. to IEC 60502-1)
Double Aluminium Tape armour
XLPE/DSTA/PVC (acc. to IEC 60502-1)
Filler (Polyprophylene yarn,or extruded filler
Double Galvanized Steel Tape armour
11
2
3
5
4
6
7
2
3
4
5
6
7
1
2
3
4
5
1
2
3
4
5
Note : Special application upon request* Available product in accordance to : SPLN, ICEA/NEMA,
AS standard or other requirement.* Flame retardant test acc to IEC 60332-3 Cat. A, B or C.* Anti termite performance.* Tin coated Copper conductor.* Polyethylene / Low smoke Halogen Free sheathed
Section 3 - XLPE Insulated Cables
600/1000 V XLPE INSULATED, ALUMINIUM TAPE ARMOURED AND PVC SHEATHED CABLES
XLPE/DATA/PVC (IEC 60502-1)
CONSTRUCTION TECHNICAL DATA
Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2)
Insulation : XLPE Compound Operating Temperature
Inner covering : PVC Compound Maximum 90°C
Armour
Sheath : PVC Compound type ST2
: Insulation - Black
Sheath - Black
SINGLE CORE
Conductor Nominal Nominal Nominal Overall Maximum
Nominal No./ Diameter Thickness Thickness Thickness Thickness diameter Weight Conductor
Cross- Diameter of of of Inner of of of of Resistance
section of wire Conductor Insulation covering Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) tape (approx.) (approx.)
mm² No./mm mm mm mm mm mm mm kg/km
16 4.7 0.7 1.0 0.5 1.8 13.5 335 1.15
25 5.9 0.9 1.0 0.5 1.8 15.0 455 0.73
35 7.1 0.9 1.0 0.5 1.8 16.5 570 0.52
50 Compact 8.1 1.0 1.0 0.5 1.8 17.5 705 0.39
70 round 9.7 1.1 1.0 0.5 1.8 19.5 930 0.27
95 stranded 11.6 1.1 1.0 0.5 1.8 21.5 1210 0.19
120 12.9 1.2 1.0 0.5 1.8 23.0 1470 0.15
150 14.3 1.4 1.0 0.5 1.8 24.5 1760 0.12
185 16.0 1.6 1.0 0.5 1.8 27.0 2155 0.1
240 18.3 1.7 1.0 0.5 1.8 29.5 2735 0.08
300 20.7 1.8 1.0 0.5 1.9 32.0 3365 0.06
400 23.4 2.0 1.2 0.5 2.0 35.5 4240 0.0470
500 26.5 2.2 1.2 0.5 2.1 39.5 5350 0.04
630 30.3 2.4 1.2 0.5 2.3 44.0 6670 0.03
Page - 78
Armoured Cables
Uo/U - 600/1000 V
: Double Aluminium tape
Colour Ident.
Aluminium
W/km
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Black
Sheath - Black
TWO CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 12.5 220
1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 13.0 230 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 13.0 258 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 13.5 268 7.41
4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 14.0 312 4.61
4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 15.0 326 4.61
6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 15.0 372 3.08
6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 16.0 387 3.08
10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 18.0 514 1.83
16 4.7 0.7 1.0 0.2 1.8 19.0 643 1.15
25 5.9 0.9 1.0 0.2 1.8 23.0 893 0.727
35 7.1 0.9 1.0 0.2 1.8 24.5 1134 0.524
50 8.1 1.0 1.0 0.2 1.8 27.0 1422 0.387
70 9.7 1.1 1.0 0.2 1.9 30.5 1905 0.268
95 11.6 1.1 1.2 0.2 2.0 35.0 2544 0.193
120 12.9 1.2 1.2 0.5 2.1 39.5 3505 0.153
150 14.3 1.4 1.4 0.5 2.3 43.5 4245 0.124
185 15.9 1.6 1.4 0.5 2.4 48.5 5180 0.0991
240 18.3 1.7 1.6 0.5 2.6 54.0 6530 0.0754
300 20.7 1.8 1.6 0.5 2.7 59.5 8004 0.0601
Conductor Nominal Nominal
600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)
Thickness
Sheath
Weightdiameter
cable cable at 20°C
(approx.)
/km
Resistance
Overall Maximum
(approx.)
Nominal No./ Diameter Thickness
Insulation
Conductor
Cross- Diameter of of of of of
section of wire Conductor
mm² No./mm mm
area (approx.) (approx.)
mm mm mm kg/kmmmmm
Compact
round
stranded
Nominal
thickness
of
Steel tape
Thickness
of Inner
covering
(approx.)
Page - 79
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue
Sheath - Black
THREE CORES
1.5 1 / 1.58 1.58 0.7 1.0 0.2 1.8 13.0 249
1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 13.5 259 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 13.5 294 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 14.0 307 7.41
4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 15.0 263 4.61
4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 15.5 381 4.61
6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 16.0 445 3.08
6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 16.5 463 3.08
10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 18.5 630 1.83
16 4.7 0.7 1.0 0.2 1.8 20.0 812 1.15
25 5.9 0.9 1.0 0.2 1.8 23.5 1150 0.727
35 7.1 0.9 1.0 0.2 1.8 26.0 1481 0.524
50 8.1 1.0 1.0 0.2 1.8 28.5 1882 0.387
70 9.7 1.1 1.2 0.2 1.9 33.0 2588 0.268
95 11.6 1.1 1.2 0.2 2.1 37.5 3456 0.193
120 12.9 1.2 1.2 0.5 2.2 42.0 4669 0.153
150 14.3 1.4 1.4 0.5 2.4 46.5 5708 0.124
185 15.9 1.6 1.4 0.5 2.5 51.5 6965 0.0991
240 18.3 1.7 1.6 0.5 2.7 58.0 8905 0.0754
300 20.7 1.8 1.6 0.5 2.9 64.0 10919 0.0601
section of wire Conductor Insulation
600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)
Weight Conductor
Cross- Diameter of of of of of Resistance
Nominal No./ Diameter Thickness Thickness diameter
Maximum
cable at 20°C
Conductor Nominal Nominal Overall
(approx.) (approx.)
Sheath cablecovering of
(approx.) Steel tape (approx.)
mm² No./mm mm mm mm mm kg/km
area (approx.)
/km
Compact
round
stranded
mm mm
of Inner thickness
Page - 80
Thickness Nominal
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Red,Yellow, Blue, Black
Sheath - Black
FOUR CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 13.5 280
1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 14.0 293 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 14.5 343 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 15.0 357 7.41
4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 16.0 426 4.61
4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 16.5 446 4.61
6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 17.0 531 3.08
6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 17.5 552 3.08
10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 20.0 764 1.83
16 4.7 0.7 1.0 0.2 1.8 21.5 999 1.15
25 5.9 0.9 1.0 0.2 1.8 25.5 1434 0.727
35 7.1 0.9 1.0 0.2 1.8 28.5 1859 0.524
50 8.1 1.0 1.0 0.2 1.9 31.5 2383 0.387
70 9.7 1.1 1.2 0.2 2.0 36.0 3311 0.268
95 11.6 1.1 1.2 0.5 2.2 42.5 4872 0.193
120 12.9 1.2 1.4 0.5 2.4 46.5 5983 0.153
150 14.3 1.4 1.4 0.5 2.5 51.0 7274 0.124
185 15.9 1.6 1.4 0.5 2.7 57.0 8922 0.0991
240 18.3 1.7 1.6 0.5 2.9 64.0 11427 0.0754
300 20.7 1.8 1.6 0.5 3.1 70.5 14015 0.0601
/km
Compact
round
stranded
mm mm
(approx.)
mm² No./mm mm mm mm mm kg/km
area (approx.) (approx.) (approx.)
Sheath cable
(approx.) Steel tape
cable at 20°Csection of wire Conductor Insulation covering of
Weight Conductor
Cross- Diameter of of of of of Resistance
Nominal No./ Diameter Thickness Thickness diameter
Conductor Nominal Nominal Overall Maximum
600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)
Page - 81
Thickness Nominal
of Inner thickness
Section 3 - XLPE Insulated Cables Armoured Cables
CONSTRUCTION TECHNICAL DATA Conductor : Plain Annealed Copper Voltage
(to IEC 60228 class 2) Uo/U - 600/1000 V Insulation : XLPE Compound Operating Temperature Filler : Suitable material Maximum 90°C Inner covering : PVC Compound Armour : Double Galvanized Steel tape Sheath : PVC Compound type ST2 Colour Ident. : Insulation - Black with numbering code
Sheath - Black
FIVE CORES
1.5 1 / 1.38 1.38 0.7 1.0 0.2 1.8 14.5 319
1.5 7 / 0.52 1.56 0.7 1.0 0.2 1.8 15.0 333 12.1
2.5 1 / 1.78 1.78 0.7 1.0 0.2 1.8 15.5 390 7.41
2.5 7 / 0.67 2.01 0.7 1.0 0.2 1.8 16.0 405 7.41
4 1 / 2.26 2.26 0.7 1.0 0.2 1.8 17.0 496 4.61
4 7 / 0.85 2.55 0.7 1.0 0.2 1.8 17.5 520 4.61
6 1 / 2.77 2.77 0.7 1.0 0.2 1.8 18.5 620 3.08
6 7 / 1.04 3.12 0.7 1.0 0.2 1.8 19.0 645 3.08
10 7 / 1.35 4.05 0.7 1.0 0.2 1.8 22.0 900 1.83
16 4.7 0.7 1.0 0.2 1.8 23.5 1196 1.15
25 5.9 0.9 1.0 0.2 1.8 27.5 1720 0.727
35 7.1 0.9 1.0 0.2 1.9 31.0 2252 0.524
50 8.1 1.0 1.2 0.2 2.0 35.0 2946 0.387
stranded
kg/km /km
round
mm mm
(approx.)
mm mm
Compact
mm² No./mm mm mm
Sheath cable cable at 20°C
area (approx.) (approx.) (approx.) Steel tape (approx.)
of of of Resistance
section of wire Conductor Insulation covering of
Thickness diameter Weight Conductor
Cross- Diameter of of of Inner thickness
Nominal No./ Diameter Thickness Thickness Nominal
600/1000 V XLPE INSULATED, STEEL TAPE ARMOURED AND PVC SHEATHED CABLESXLPE/DSTA/PVC (IEC 60502-1)
Conductor Nominal Nominal Overall Maximum
Page - 82
CURRENT CARRYING CAPACITY FOR SINGLE CORE XLPE INSULATED CABLE
Current Carrying Capacity DC Alternating Minimum Conductor
Conductor In Air ( 30°C ) Conductor Current Insulation Short
Nominal Flat Trefoil Trefoil Resistance resistance Nominal Resistance circuit
Area at 20°C at 90°C / Trefoil Flat Trefoil Flat Capacitance at 20°C current /
50 Hzcore to core core to core 1 sec
mm² A A A Ω / km Ω / km Ω / km Ω / km M Ω. km
1.5 re/rm 22 21 22 12.1 15.4 0.1459 0.1603 0.4646 0.5108 0.0520 3000 0.215
2.5 re/rm 30 29 29 7.41 9.45 0.1339 0.1484 0.4264 0.4726 0.0571 2500 0.358
4 re/rm 42 40 37 4.61 5.88 0.1244 0.1391 0.3962 0.4424 0.0621 2000 0.572
6 re/rm 55 53 46 3.08 3.93 0.1160 0.1305 0.3693 0.4155 0.0665 2000 0.858
10 re/rm 77 74 61 1.83 2.34 0.1072 0.1217 0.3416 0.3878 0.0721 1500 1.430
16 cm 105 101 79 1.15 1.47 0.1028 0.1172 0.3264 0.3726 0.0751 1500 2.288
25 cm 141 135 101 0.73 0.93 0.0984 0.1130 0.3124 0.3586 0.0752 1500 3.575
35 cm 176 169 122 0.52 0.67 0.0932 0.1077 0.2967 0.3429 0.0789 1000 5.005
50 cm 216 207 144 0.39 0.49 0.0911 0.1056 0.2890 0.3353 0.0796 1000 7.150
70 cm 279 268 178 0.27 0.34 0.0875 0.1023 0.2778 0.3240 0.0815 900 10.01
95 cm 342 328 211 0.19 0.25 0.0845 0.0991 0.2674 0.3136 0.0848 800 13.59
120 cm 400 383 240 0.15 0.2 0.0827 0.0974 0.2629 0.3091 0.0853 800 17.16
150 cm 464 444 271 0.12 0.16 0.0829 0.0975 0.2626 0.3088 0.0846 800 21.45
185 cm 533 510 304 0.1 0.127 0.0830 0.0976 0.2612 0.3074 0.0833 900 26.46
240 cm 634 607 351 0.08 0.1 0.0814 0.0960 0.2565 0.3028 0.0848 800 34.32
300 cm 736 703 396 0.06 0.08 0.0799 0.0944 0.2526 0.2988 0.0860 800 42.90
400 cm 868 823 464 0.0470 0.06 0.0728 0.0874 0.2500 0.2962 0.0865 700 57.20
500 cm 998 946 525 0.04 0.05 0.0777 0.0923 0.2471 0.2933 0.0871 700 71.50
630 cm 1151 1088 596 0.03 0.04 0.0770 0.0916 0.2447 0.2909 0.0880 700 90.09
800 cm 1328 1252 679 0.02 0.0310 0.0763 0.0908 0.2425 0.2887 0.0883 700 114.40
1000 rm 1511 1420 767 0.02 0.03 0.0743 0.0889 0.2363 0.2825 0.0902 600 143.00
Note : re : Round solid conductor IEC 60228 class 1 Underground : Thermal resistivity of soil
rm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cm capacity for : in cable ducting, in cables conduit, cables direct in the -
cm : Circular stranded compacted conductor IEC 60228 class 2 Base temperature : 20°C ground with / without added protection against mechanical damage
Reactance2) (50 Hz) Inductance2) (50 Hz)In Ground 1)
mH / km mH / km μF / km kA
: 2.5 K.m / W Note : 1) Reference methode of installation to be used to obtain current carrying
2) The Inductance calculated for non armour cable.
Section
4-
Gen
eralInformatio
n
Pag
e-
83
DC Alternating Minimum ConductorConductor Current Insulation Short
Resistance resistance Nominal Resistance circuit 2 3 / 4 * 2 3 / 4 * at 20°C at 90°C / 2 / 3 4 2 / 3 4 Capacitance at 20°C current /
NominalArea
CURRENT CARRYING CAPACITY FOR MULTICORE XLPE INSULATED CABLE
Current Carrying Capacity Reactance (50 Hz) Inductance (50 Hz)
Conductor In Air ( 30°C ) Underground, Direct burial
Section 4 -General Information
Page -84
Core Core Core Core 50 Hz Core Core Core Core core to core core to core 1 sec
A A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km kA
1.5 re/rm 26 23 26 22 12.1 15.4 0.0999 0.1125 0.3181 0.2498 0.0520 3000 0.2152.5 re/rm 36 32 34 29 7.41 9.45 0.0961 0.1086 0.3057 0.2325 0.0571 2500 0.3584 re/rm 49 42 44 37 4.61 5.88 0.0899 0.1025 0.2860 0.2128 0.0621 2000 0.5726 re/rm 63 54 56 46 3.08 3.93 0.0853 0.0980 0.2714 0.1982 0.0665 2000 0.858
10 re/rm 86 75 73 61 1.83 2.34 0.0802 0.0930 0.2552 0.1819 0.0721 1500 1.43016 cm 115 100 95 79 1.15 1.47 0.0781 0.0910 0.2485 0.1752 0.0751 1500 2.28825 cm 149 127 121 101 0.727 0.927 0.0779 0.0908 0.2480 0.1748 0.0752 1500 3.57535 cm 185 158 146 122 0.524 0.669 0.0753 0.0883 0.2397 0.1664 0.0789 1000 5.005
50 cm 225 192 173 144 0.387 0.494 0.0748 0.0877 0.2379 0.1646 0.0796 1000 7.15070 cm 289 246 213 178 0.268 0.343 0.0734 0.0864 0.2335 0.1602 0.0815 900 10.0195 cm 352 298 252 211 0.193 0.247 0.0711 0.0842 0.2262 0.1530 0.0848 800 13.59
mm²
120 cm 410 346 287 240 0.153 0.197 0.0708 0.0839 0.2254 0.1521 0.0853 800 17.16
150 cm 473 399 324 271 0.124 0.160 0.0712 0.0843 0.2267 0.1534 0.0846 800 21.45185 cm 542 456 363 304 0.0991 0.128 0.0720 0.0851 0.2292 0.1559 0.0833 900 26.46240 cm 641 538 419 351 0.0754 0.0984 0.0711 0.0842 0.2264 0.1531 0.0848 800 34.32300 cm 741 621 474 396 0.0601 0.0799 0.0704 0.0835 0.2240 0.1507 0.0860 800 42.90400 cm 892 745 555 464 0.0470 0.0633 0.0701 0.0832 0.2231 0.1498 0.0865 700 57.20
Note : re : Round solid conductor IEC 60228 class 1 Thermal resistivity of soil : 2.5 K.m / W 4* : 3 Phasa + Netral / Groundrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cmcm : Circular stranded compacted conductor IEC 60228 class 2 Base temperature : 20°C
Underground :
Section 4
Page
CURRENT CARRYING CAPACITY FOR SINGLE CORE PVC INSULATED CABLE
Current Carrying Capacity DC Alternating Minimum Conductor
Conductor In Air ( 30°C ) Conductor Current Insulation Short
Nominal Flat Trefoil Trefoil Resistance resistance Nominal Resistance circuit
Area at 20°C at 70°C / Trefoil Flat Trefoil Flat Capacitance at 20°C current /
50 Hzcore to core core to core 1 sec
mm² A A A Ω / km Ω / km Ω / km Ω / km M Ω. km kA
1.5 re/rm 18 17.5 18.5 12.1 14.5 0.1476 0.1735 0.4697 0.5159 0.1391 50 0.174
2.5 re/rm 25 24 24 7.41 8.87 0.1359 0.1621 0.4327 0.4789 0.1531 50 0.290
4 re/rm 34 33 31 4.61 5.52 0.1291 0.1555 0.4110 0.4572 0.1553 50 0.464
6 re/rm 45 43 39 3.08 3.69 0.1209 0.1475 0.3848 0.4310 0.1671 50 0.696
10 re/rm 63 60 52 1.83 2.19 0.1112 0.1381 0.3538 0.4000 0.1827 50 1.160
16 rm 85 82 67 1.15 1.38 0.1034 0.1307 0.3292 0.3754 0.1966 40 1.856
25 rm 114 110 86 0.73 0.870 0.0988 0.1263 0.3145 0.3607 0.2001 40 2.900
35 rm 143 137 103 0.52 0.627 0.0941 0.1218 0.2995 0.3457 0.2100 40 4.060
50 rm 174 167 122 0.39 0.463 0.0909 0.1188 0.2895 0.3357 0.2127 30 5.800
70 rm 225 216 151 0.27 0.321 0.0869 0.1150 0.2767 0.3229 0.2223 30 8.120
95 rm 275 264 179 0.19 0.232 0.0864 0.1145 0.2749 0.3212 0.2205 30 11.02
120 rm 321 308 203 0.15 0.184 0.0838 0.1121 0.2669 0.3131 0.2270 30 13.92
150 rm 372 356 230 0.12 0.150 0.0833 0.1116 0.2651 0.3113 0.2274 20 17.40
185 rm 427 409 258 0.1 0.120 0.0828 0.1111 0.2634 0.3096 0.2279 20 21.46
240 rm 507 485 297 0.08 0.09 0.0814 0.1098 0.2592 0.3054 0.2308 20 27.84
300 rm 587 561 336 0.06 0.07 0.0807 0.1091 0.2567 0.3029 0.2323 20 34.80
400 rm 689 656 394 0.0470 0.06 0.0799 0.1084 0.2543 0.3005 0.2387 20 46.40
500 rm 789 749 445 0.04 0.05 0.0790 0.1075 0.2513 0.2975 0.2355 20 58.00
630 rm 905 855 506 0.03 0.04 0.0773 0.1059 0.2459 0.2921 0.2416 20 73.08
800 rm 1037 971 577 0.02 0.0334 0.0756 0.1044 0.2406 0.2868 0.2476 20 92.80
1000 rm 1167 1079 652 0.02 0.0290 0.0750 0.1038 0.2386 0.2848 0.2500 20 116.00
Note : re : Round solid conductor IEC 60228 class 1 Underground : Thermal resistivity of soil
rm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cm capacity for : in cable ducting, in cables conduit, cables direct in the -
Base temperature : 20°C ground with / without added protection against mechanical damage
Reactance2) (50 Hz) Inductance 2) (50 Hz)In Ground 1)
mH / km mH / km μF / km
: 2.5 K.m / W Note : 1) Reference methode of installation to be used to obtain current carrying
2) The Inductance calculated for non armour cable.
Sectio
n4
-G
eneralIn
formation
Pag
e-
85
DC Alternating Minimum ConductorConductor Current Insulation Short
Resistance resistance Nominal Resistance circuit 2 3 / 4 * 2 3 / 4 * at 20°C at 70°C / 2 / 3 4 2 / 3 4 Capacitance at 20°C current /
core to core core to core 1 sec
Reactance (50 Hz) Inductance (50 Hz)In Air ( 30°C ) Underground, Direct burial
CURRENT CARRYING CAPACITY FOR MULTICORE PVC INSULATED CABLE
Current Carrying Capacity
NominalArea
Conductor
Section 4 -General Information
Page -86
Core Core Core Core 50 Hz Core Core Core Core core to core core to core 1 sec
A A A A Ω / km Ω / km Ω / km Ω / km mH / km mH / km µF / km M Ω. km kA
1.5 re/rm 22 18.5 22 18 12.1 14.5 0.1075 0.1199 0.3421 0.2688 0.1391 50 0.1742.5 re/rm 30 25 29 24 7.41 8.87 0.0994 0.1120 0.3165 0.2433 0.1531 50 0.2904 re/rm 40 34 38 31 4.61 5.52 0.0983 0.1109 0.3130 0.2398 0.1553 50 0.4646 re/rm 51 43 47 39 3.08 3.69 0.0928 0.1054 0.2954 0.2221 0.1671 50 0.696
10 re/rm 70 60 63 52 1.83 2.19 0.0865 0.0993 0.2754 0.2021 0.1827 50 1.16016 rm 94 80 81 67 1.15 1.38 0.0818 0.0946 0.2604 0.1871 0.1966 40 1.85625 rm 119 101 104 86 0.727 0.870 0.0807 0.0936 0.2569 0.1836 0.2001 40 2.90035 rm 148 126 125 103 0.524 0.627 0.0778 0.0907 0.2478 0.1745 0.2100 40 4.060
50 rm/sm 180 153 148 122 0.387 0.464 0.0822 0.0950 0.2617 0.1884 0.2127 30 5.80070 rm/sm 232 196 183 151 0.268 0.321 0.0789 0.0917 0.2510 0.1777 0.2223 30 8.12095 rm/sm 282 238 216 179 0.193 0.232 0.0791 0.0920 0.2518 0.1785 0.2205 30 11.020120 rm/sm 328 276 246 203 0.153 0.184 0.0772 0.0901 0.2457 0.1724 0.2270 30 13.920
mm²
120 rm/sm 328 276 246 203 0.153 0.184 0.0772 0.0901 0.2457 0.1724 0.2270 30 13.920
150 rm/sm 379 319 278 230 0.124 0.150 0.0775 0.0904 0.2466 0.1733 0.2274 20 17.400185 rm/sm 434 364 312 258 0.0991 0.120 0.0769 0.0898 0.2447 0.1714 0.2279 20 21.460240 rm/sm 514 430 361 297 0.0754 0.0926 0.0759 0.0889 0.2417 0.1684 0.2308 20 27.840300 rm/sm 593 497 408 336 0.0601 0.0749 0.0756 0.0886 0.2407 0.1674 0.2323 20 34.80
Note : re : Round solid conductor IEC 60228 class 1 Thermal resistivity of soil : 2.5 K.m / W 4* : 3 Phasa + Netral / Groundrm : Circular stranded conductor IEC 60228 class 2 Depth of laying : 80 cmsm : Sector shape stranded conductor IEC 60228 class 2 Base temperature : 20°C
Underground :
Rating factor relating to open air temperature
Air temperature°C 10 15 20 25 30 35 40 45 50 55 60 65 70 80
PVC Insulation 1.22 1.17 1.12 1.06 1.00 0.94 0.87 0.79 0.71 0.61 0.50 - - -
XLPE Insulation 1.15 1.12 1.08 1.04 1.00 0.96 0.91 0.87 0.82 0.76 0.71 0.65 0.58 0.41
Rating factor relating to Ground temperature
Ground temp °C 10 15 20 25 30 35 40 45 50 55 60 65 70 80
PVC Insulation 1.10 1.05 1.00 0.95 0.89 0.84 0.77 0.71 0.63 0.55 0.45 - - -
XLPE Insulation 1.07 1.04 1.00 0.96 0.93 0.89 0.85 0.80 0.76 0.71 0.65 0.60 0.53 0.38
1 1.5 2 2.5 3
Rating factors 1.18 1.1 1.05 1.00 0.96
Number of coreRating factor based on 3 core cable for size 1.5 ~ 10 mm²
Under ground In Air
5 0.70 0.75
7 0.60 0.65
10 0.50 0.55
14 0.45 0.50
19 0.40 0.45
24 0.35 0.40
40 0.30 0.35
61 0.25 0.30
Correction factor of Curent carrying capacity
Rating factor relating to themal ground resistivity
Thermal Resistivity of soil K.m / W
Sectio
n4
-G
eneralInfo
rmation
Pag
e-
87
Section 4 - General Information
to be applied to reference ratings for multi-core cables in free air
Method of installationNumber Number of cables
of trays 1 2 3 4 6 9
1 1.00 0.88 0.82 0.79 0.76 0.73
2 1.00 0.87 0.80 0.77 0.73 0.68
3 1.00 0.86 0.79 0.76 0.71 0.66
Perforated trays
(note 2)
1 1.00 1.00 0.98 0.95 0.91 -
2 1.00 0.99 0.96 0.92 0.87 -
3 1.00 0.98 0.95 0.91 0.85 -
1 1.00 0.88 0.82 0.78 0.73 0.72
2 1.00 0.88 0.81 0.76 0.71 0.70
Vertical
Perforated
trays
(note 3)
1 1.00 0.91 0.89 0.88 0.87 -
2 1.00 0.91 0.88 0.87 0.85 -
1 1.00 0.87 0.82 0.80 0.79 0.78
2 1.00 0.86 0.80 0.78 0.76 0.73
Ladder 3 1.00 0.85 0.79 0.76 0.73 0.70
supports,
cleats, etc.
(note 2) 1 1.00 1.00 1.00 1.00 1.00 -
2 1.00 0.99 0.98 0.97 0.96 -
3 1.00 0.98 0.97 0.96 0.93 -
Factors apply to single layer groups of cables as shown above and do not apply when cables are installed in more than one layer touching each other.
Values for such installations may be significantly lower and shall be determined by an appropriate method.
NOTE 1
NOTE 2 Values are given for vertical a spacing between trays of 300 mm and at least 20 mm between trays and wall. For closer spacing the factors
should be reduced.
NOTE 3 Values are given for horizontal spacing between trays of 225 mm with trays mounted back to back. For closer spacing the factors should be
reduced.
Page - 88
Reduction factors for group of more than one multi-core cable (note 1)
Values given are averages for the cable types and range of conductor sizes considered. The spread of values is generally less than ± 5 %.
Touching
Spaced
≥ 20 mm
≥ 20 mm
Touching
Spaced
Touching
Spaced
≥ 20 mm
≥ 20 mm
≥225 mm
≥225 mm
D
D
D
Section 4 - General Information
to be applied to reference rating for one circuit of single-core cables in free air
Method of installationNumber of Use as a multiplier to
trays 1 2 3 rating for
Perforated 1 0.98 0.91 0.87 Three cables in
trays 2 0.96 0.87 0.81 horizontal
(Note 3) 3 0.95 0.85 0.78 formation
Vertically
Perforated 1 0.96 0.86 - Three cables
trays
(note 4) 2 0.95 0.84 - formation
Ladder 1 1.00 0.97 0.96 Three cables in
supports,cleats etc. 2 0.98 0.93 0.89 horizontal
(Note 3) 3 0.97 0.90 0.86 formation
Perforated 1 1.00 0.98 0.96
trays 2 0.97 0.93 0.89
(Note 3) 3 0.96 0.92 0.86
Vertical 1 1.00 0.91 0.89 Three cables in
perforated trays trefoil
(Note 4) 2 1.00 0.90 0.86 formation
Ladder 1 1.00 1.00 1.00
supports,cleats etc. 2 0.97 0.95 0.93
(Note 3) 3 0.96 0.94 0.90
NOTE 1
NOTE 2 For circuits having more than one cable in parallel per phase, each three phase set of conductors should be considered as a circuit for the
purpose of this table
NOTE 3
NOTE 4 Values are given for horizontal spacings between trays of 225 mm with trays mounted back to back and at least 20 mm between the tray
and any wall. For closer spacing the factors should be reduced.
Page - 89
Reduction factors for groups of more than one circuit of single-core cables (Note 1)
in vertcal
Value given are averages for the cable types and range of conductor sizes considered. The spread of values is generally less than ± 5 %.
Values are given for vertical spacings between trays of 300 mm.For closer spacing the factors should be reduced.
Touching
≥ 20 mm
Spaced
≥
Touching
≥ 20 mm
≥ 20 mm
≥ 2 D
225 mm
≥ 2 D
≥ 20 mm
≥ 2 D
Touching
≥225 mm
D
D
D
Section 4 - General Information
PERMISSIBLE PULLING TENSION
Pulling equipment Permissible pulling tension (kg)
PULLING EYE 7 x (Number of core) x (Cross section area of conductor)
CABLE NET About 500 kg, but the maximum tension shall not be more than one of
conductor (same calculation as using PULLING EYE)
Pulling equipment Permissible pulling tension (kg)
PULLING EYE 4 x (Number of core) x (Cross section area of conductor)
CABLE NET About 500 kg, but the maximum tension shall not be more than one of
conductor (same calculation as using PULLING EYE)
Note) Cable net shall be covered more than 500 mm in length
MINIMUM BENDING RADIUS D : Diameter of cable
Type of cable
Minimum bending radius
Single core cableMulti Core Cable
Round / Compacted Conductor Sector conductor
Medium Voltage Cable 10D 12D 8D
Reference data on other types of POWER cables
Type of cable
Minimum bending radius
Single core cable
Multi core cableRound/CompactedSector conductor
conductor
10D 12D 8D
8D 12D 6D
Triplex type cable ( CVT etc ) - - 8D
Wire armored cable ( XLPE/SWA/PVC etc) 10D 12D 10D
Tape armored cable (XLPE/DSTA/PVC etc) 10D 12D 10D
Flat tape armored (XLPE/FSWA/PVC etc) 10D 12D 10D
Reference data on other types of INSTRUMENT cables
Type of cableMinimum bending radius
Multi core cable
Non shield cable ( XLPE/PVC etc ) 6D
6D AL mylar tape
PERMISSIBLE SIDE WALL PRESSURE
Side wall pressure (T1) can be calculated with below formula.
T1 = Pulling tension (T) / Bending radius (r)
CALCULATION OF CABLE PULLING TENSION DURING INSTALLATION
The cable pulling tension (T2) during installation can be calculated with below formula.
1) Horizontal straight part : W : Weight of cable (kg/m)
2) Horizontal curve part : L : Length of cable with straight part (m)
: Angle of curve part (rad)
: Friction factor Friction factor T2 : Pulling tension (kg)
on pulley 0.2 T3 : Pulling tension before curve part (kg)
underground 0.2 - 0.3 T4 : Pulling tension after curve part (kg)
in pipe 0.5 - 0.7
Page - 90
Reference data on Aluminium conductor
Sheild cable ( XLPE/PVC-S etc )
Non Sheild cable ( XLPE/PVC etc )
Note) Sheild tape shall be
Sheild cable (XLPE/PVC-S etc)
300kg/m is suggested as permissible side wall pressure to the cable during installation.
θ
µ
T kg
r
LWT **2 eTT *43
Section 4 - Contents & Information
Fire Performance TestsFlame Propagation Tests IEC 60332-1Part 1 - Test on a single vertical insulated wire or cable This is a relatively simple method for providing adequate indication of the flame-retardant characteristics of a single cable.
A 600 mm long cable sample is verticatlly suspended, placed in the middle of a three-sided metal screen.
This is subjected to the regulated flame of one (up to a cable diameter of 50 mm) or two (above 50 mm diameter) gas burners at an
angle of 45° to the cable. The flame is applied for a continuous time calculated according to an increasing with the cable weight
(from around 1-minute for a small control cable to about 7 minutes for a 4 core 300 mm² power cable). The test is passed if the cable
has self-extinguished and the charred or flame affected portion of the cable has not reached the top of the sample.
IEC 60332-3Part 3 - Test on bunched wire or cablesThis test was developed to obtain a method to determine the flame propagation characteristics of bunched cables.
It can not be assumed that because a single vertical cable complies with the requirements of IEC 60332 part 1 it will also behave in
a similar manner when bunched with others cables.
The propagation of a flame along a bunch of cables depends on a number of features, such as :
The volume of combustible material exposed to the fire
The geometrical configuration of the cables
The temperature at which it is possible to ignite any gases emitted from the cables
The quantity of combustible gas released from the cables
The volume of air passing through the cable installation
The test consists of a vertical chamber, 1 x 2 x 4 m. Openings air inlet and outlet are provided in the base and the top of the test
chamber for a controlled air flow rate during the test. The cable samples to be tested are 3.5 m long and fixed to a steel ladder mounted
150 mm from the rear wall vertically with the test chamber. The number of lengths of cables in the test depends on the test categoty
based on the volume of combustible material.
Test Category Volume of combustible material Time of flame application
A 7 litres / m 40 Minutes
B 3.5 litres / m 40 Minutes
C 1.5 litres / m 20 Minutes
A ribbon gas burner of a set size and heat flow rate, operating at 800°C is mounted horizontally in front of the cable samples at a set
distance and height. The test is passed if the charred or affected portion of the samples have not reached a height exceeding 2.5 m
above the bottom edge of the burner.
IEC 60331 - 21 (1999)Fire resisting characteristics of electric cables Circuit Integrity TestThis test determines the circuit integrity of a cable during and after a prolonged fire :
A horizontally suspended sample 1200 mm long is placed 75 mm above a 610 mm long ribbon type gas burner, the flame temperature
of which is regulated to 750°C. The conductors of the sample are connected to an AC voltage source, at the operating voltage, via fuses.
The flame and test voltage shall be applied continuously for a period of 90 min. 12 hours after the flame has been extinguished the cable
is energised again.
The test is passed if no failure of any of the fuses occurs.
Page - 91
1
Section 4 - General Information
Page - 92
NOTES