luxaflex roller blinds with patented edge technology · between the linking blinds is minimised...
TRANSCRIPT
SIMPLY SMARTER BY DESIGN
LUXAFLEX® ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY
EDGE
Ergonomically
Designed for
Greater
Efficiency
LUXAFLEX® ROLLER BLINDS WITH Edge TECHNOLOGY
SIMPLY SMARTER BY DESIGN
INTRODUCTIONIntroducing Luxaflex® Roller Blinds with patented EDGE technology, our roller blind hardware system developed by an international design team specifically for our requirements.
Featuring a sleek architectural design with smooth operation and
unrivalled inner strength, EDGE technology allows you to span
even the largest window beautifully. Highly durable hardware
delivers smooth and reliable operation.
luxaflex.com.au4
EDGE Features & Benefits
Can be operated using either standard
chain drive or motorised technology.
The durable standard chain drive is
available in two ratio mechanism 1:1 and
1:1.75. The standard 1:1.75 ratio enables a
heavier blind to be lifted without the need
of a spring booster. But you can nominate
to use the optional 1:1 ratio. It is also
aesthetically pleasing in one size format for
a consistent look throughout the home.
Universal spring loaded idle ends provide
for smooth and easy installation.
The aluminium tube has been engineered
to perform well with minimal deflection over
large expanses.
SMOOTH AND LIGHT OPERATION
Hardware components are available in four
colour options – White, Black, Grey and
Magnolia.
All brackets are universal in design which
means the operating side can be changed
simply on site if required.
Two bracket sizes are available, 38mm and
55mm which ensures the correct bracket
can be selected for challenging installations
and maximises the drop capacity.
Brackets are available with slim line end
caps which are recommended for all face
fit installations.
OUTER BEAUTY
SIMPLY SMARTER BY DESIGN
EDGE Features & Benefits
LIVING WITH INNOVATION
Two compact dual bracket designs are available:
- The standard (under) roll configuration ensures the blind skin
can be fitted close to the window.
- The reverse (over) roll configuration provides a self pelmet
effect. Both dual brackets can be installed with either same
side or opposite end controls and have universal mounting
options.
An optional patented integrated levelling device makes it easy
to adjust shades after mounting.
Two standard linking systems are available:
- The standard connector set minimises the intermediate gap
on linked configurations.
- The optional aligner link maximises flexibility during
installation with a fine adjustment option for aligning the level of
the blinds.
Both linking options have 15 degree play. This provides an
allowance for slightly misaligned installations.
An independent linking option is available for configurations
that require multiple operation.
A 45 and 90 degree linking mechanism is also available for bay
and corner windows.
A sleek (84mm projection) and contemporary head box and
fascia system are available in both an anodised and powder
coated finish (white, black or magnolia) with colour coded
endcaps.
Both the head box and fascia system can be installed in both
reveal and face fit positions and have a snap lock cover and
plastic outlets for easy installation and quiet operation.
To obtain room darkening, the head box system can be
installed with side channels, available in matching powder
coated colours (white, black or magnolia) or anodised finish.
Standard Dual Roller
Linked Blinds
Headbox System
SIMPLY SMARTER BY DESIGN
luxaflex.com.au6
SUPERIOR DESIGNIntroducing Luxaflex® Heavy Duty Roller Blinds with patented EDGE technology, a new heavy duty roller blind hardware system developed by Hunter Douglas.
EDGE Heavy Duty
The new modular system is designed to allow for larger blind
widths, featuring a 65 mm tube with the strength to allow for
widths up to 3.8 meters and drops up to 5.5 meters.
SIMPLY SMARTER BY DESIGN
Two bracket sizes available – 55mm and 75mm which ensures the correct bracket can be selected to maximise the drop capacity.
The aluminium tube has been engineered to perform well with minimal deflection over large expanses.
Universal bracket system allows for simple installation.
The idle end plug has a 30mm play to provide for incorrect measurements.
Components are available in two colour options: black and white.
Can link up to 3 blinds with 30m2 combined sq area.
Straight linked blinds work smoothly up to an angle of 15 degrees to compensate for installation errors and allows for arches with a
large radius to be installed without a universal joint.
SMOOTH AND LIGHT OPERATION
A range of durable hardware options are now available to span widths up to 3.8m and drops up to 5.5m with smooth and reliable operation
every time. Chain operated rollers are now available with extended limitations to cater for longer drops, while motorisation has flourished
with a wide selection of motor options. Now you can select from the most superior motorised solutions to link blinds up to 30m² or simply
motorise a single heavy duty blind with a simple offordable soloution.
FABRIC RANGE
A range of new fabric options that were never offered before in the heavy duty program are now available, please check the new price list
for more information.
INNER STRENGTH
The system is available with a 50mm or 65mm aluminium tube. Both tubes have been engineered with symmetrical keyways to reduce
deflection over large expanses. Chain operated blinds will be supplied with the 50mm tube while motorised blinds will be supplied with
65mm tube as standard.
EASE OF ASSEMBLY AND INSTALLATION
Ease of assembly and installation has been the main focus point of the new system. Introducing two new heavy duty universal brackets
that can maximise the limitation of the overall blind capacity and ensures the correct selection can be made for challenging installations.
For all face fit installations bracket and screw covers will be supplied as standard.
An Aligner Set is available for linked blinds which will allow fine adjustments to be made to align bottom rails during installation. For
windows that are not square an integrated leveller can be used to adjust the height on the idle end to ensure the lateral opening is parallel.
This is particularly important for linked blinds with long drops.
EDGE Heavy Duty Features & Benefits
8
EDGE Metal Chain Drive
LEADING DESIGN
Introducing the new premium metal chain drive with a unique design statement that will complement the modern home. A highly durable hardware and operating system that allows for high sound absorption whilst delivering smooth and reliable operation.
Award Winning Design – “Furniture and Home Textiles”
product design award at the 2012 iF design awards
ceremony.
Made from ZAMAC (Zinc, Aluminium, Magnesium, Alloy,
Copper) with a high quality finish.
Heavy-duty 1:1 ratio mechanism with a patented technique
providing smooth and easy lift capabilities.
Aluminium designer bracketing system provides unique
aesthetics and strong mounting platform for any home.
The plastic cover is available in Black or Grey.
The stylish designer bracket can also be paired with the
standard chain drive available in both 1:1 and 1.75:1 ratio for
easier raising & lowering of larger blinds.
SIMPLY SMARTER BY DESIGN
EDGE Accessories
CHAIN TENSIONER
A new chain tensioner has been designed to complement the current offerings within the EDGE system. Designed in collaboration with
installers to provide an easy installation process and to meet child safety regulations. The chain tensioner comprises of high quality plastic
components to reduce noise generated from the chain without compromising on quality.
A rubber wheel is used to ensure quieter operation and reduce the overall noise generated from the system.
Easy clipping action minimises the use of screws to give a stylish appearance.
Two kit options are available for face fit or reveal fit installation.
Available in four colour options- Black, White, Grey and Magnolia.
The EDGE Technology Hardware System is available with the Ellipse Balance Rail which features a sound proofing bumper and has
been designed with perfect weight distribution in mind to ensure fabrics hang very flat.
The Ellipse Balance Rail is now available in 10 colours, which includes the original Black, White, Magnolia and Anodized.
The new colour options are Gunmetal, Granite, Limestone, Bronze and two exclusive Australian Window Furnishing colours; Dune and
Shoji White.
Four new end caps have been introduced to stylishly
co-ordinate with the Ellipse rail.
The internal design of the Ellipse Balance Rail has been re-engineered to improve the finished blind quality. This reduces fabric
reworks caused by scratching and stretching as the fabric runs through the balance rail during fabrication.
IMPROVED ELLIPSE BALANCE RAIL
Face Reveal
Note: The new chain tensioners will be available from January 2014.
luxaflex.com.au10
EDGE Components and Dimensions
STANDARD ROLLER SYSTEM
COMPONENTS
The Luxaflex Roller Blind Hardware System,
can be operated with either a chain drive
or motor. Each chain operated blind will be
supplied with a plastic chain loop however
metal or stainless steel chains are available
on request.
An Ellipse rail comes standard on all blinds
and is available in either anodised finish or
you can choose from a selection of popular
powder coated colours.
1
4
5
2
3
7
8
86
4
7
System options
14
15
16
20
22
21 27
26
25
174
419
19
18
29
28
Chain Drive and Idle Components
No Code Description
1 24.7125.XXXX* Chain Drive 1:1
1 24.7124.XXXX* Chain Drive 1.75:1
2 24.7127.XXXX* Chain Drive Cover Plate
3 24.7122.XXXX* 31mm Tube Plug
14 24.7300.7060 Metal Chain Drive 1:1
15 24.7308.XXXX# Metal Chain Drive Cover Plate
16 24.7307.XXXX# Metal Chain Drive Tube Plug
4 24.7121.XXXX* 37mm Tube Adapter
19 24.7128.XXXXA* 50mm Tube Adapter
6 24.7120.XXXX* Idle End
Bracket and Tensioner Components
No Code Description
7 24.7100.XXXX* Bracket 38mm
7 24.7102.XXXX* Bracket 55mm
8 24.7110.XXXX* Bracket Cover 38mm
8 24.7114.XXXX* Bracket Cover 55mm
20 24.7106.7060 Chrome Bracket 38mm
20 24.7108.7060 Chrome Bracket 55mm
21 24.7116.XXXX# Chrome Bracket Cover
22 24.7118.XXXX# Chrome Bracket Screw Cover
25 24.7193.XXXXA Levelling Bracket 38mm
25 24.7195.XXXXA Levelling Bracket 55mm
26 24.7190.7060A Chrome Levelling Bracket 38mm
26 24.7192.7060A Chrome Levelling Bracket 55mm
27 24.7196.7060A Integrated Leveller
Not Shown 24.7197.0000A Integrated Leveller Key
Aluminium Tubes and Springs
No Code Description
5 24.7200.0000 37mm Tube
17 24.7002.0000 HD 37mm Tube
18 24.7201.0000 50mm Tube
28 24.7202.XXXX^ 37mm Spring
29 24.7203.XXXX^ 50mm Spring
XXXX = Available in different options* = Available in White (0155,0199), Grey (0952), Black (1858), Magnolia (4459)# = Available in Grey (0952) and Black (1858)^ = Available in Right Hand Control (0000) and Left Hand Control (0001)
SIMPLY SMARTER BY DESIGN
18mm 12mm
Cloth Width
Blind Width38mm Bracket Dimensions
55mm Bracket Dimensions
EDGE Components and Dimensions
STANDARD ROLLER SYSTEM
Minimum width single blind 500mm
Minimum width single blind with booster spring 750mm
Minimum width single motorised blind (switch) 650mm
Minimum width single motorised blind (RTS) 690mm
Maximum width single blind Please refer to the pricing guide as this is fabric dependent.
Minimum drop single blind 300mm
Maximum drop single blind Please refer to the pricing guide as this is fabric dependent.
STANDARD ROLLER SYSTEM
75mm
75mm
NOTE:
Allow an extra 2mm for each end cap.
68mm
86mm
LIMITATIONS
luxaflex.com.au12
EDGE Components and Dimensions
COMPONENTS
LINKED ROLLER SYSTEM
Linked Rollers are available with either a straight
connector or an aligner connector. Unless otherwise
nominated the blind will always be supplied with
the straight connector which ensures the light gap
between the linking blinds is minimised (17mm).
The optional aligner connector has been designed
with special patented technology to assist when
installing blinds that may be trickier to line up.
5
8
7
7
31
4
37
3
4
36
4
45
839
2
1
6
XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459).# = Available in Grey (0952) and Black (1858) only.
Linked Blind Components
No Code Description
30 24.7134.XXXXA Connector Set (120mm)
31 24.7133.XXXXA Aligner Set (120mm)
32 24.7138.XXXXA Aligner Set (300mm)
33 24.7135.0000 Independent Link Component
34 24.7130.0000A Uni-Joint Component - 90 degree angle
35 24.7131.0000A Uni-Joint Component - 45 degree angle
36 24.7123.XXXXA Tube Plug Connector
37 24.7111.XXXXA Linked Bracket Cover 38mm
37 24.7115.XXXXA Linked Bracket Cover 55mm
Not Shown 24.7117.XXXX# Linked Chrome Bracket Cover
39 24.7129.XXXXA Idle End (Locking Ring)
System options
33 30 32 34 35
SIMPLY SMARTER BY DESIGN
EDGE Components and Dimensions
LIGHT GAPS & LIMITATIONS
LINK OPTIONS FIRST LINK 2ND LINK
Straight connector 17mm 22mm
Straight connector w/Spring 22mm 22mm
Aligner Connector 24mm 28mm
Aligner Connector w/Spring 28mm 28mm
Independant Link 24mm 32mm
Independant Link w/Spring 32mm 36mm
Note: Braket cover will increase light gap by 2mm on each end.
LIMITATIONS
Maximum number of linked blinds 3
Note: For Bay windows there is also a 45 and 90 degree angle
linking system. We recommend that the brackets for these blinds are
installed before measuring the opening width for an order.
18mm
See Below
17mm
Tube/Cloth Width
Blind Width Blind Width
System Width
Tube/Cloth Width
* Please refer to table below for light gap variations based on different options.
LINKED ROLLER SYSTEM
luxaflex.com.au14
EDGE Components and Dimensions
COMPONENTS
HEADBOX SYSTEM
The contemporary headbox system has been designed
to provide a simple slim line profile whilst at the same time
maximising the drop capacity for your roller. The headbox is
available in both anodised finish or a choice of powder coated
colours (white, black or magnolia).
In situations where you require additional light control a
matching one piece side channel system is available and easy
to install.
955_1.dxf4248
4
6
44
10
11
11
40
43
34
5
41
4248
45
47
44
46
1
9
System options
49 50
XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459). XXX = Available in Clear (155), Black (855), Granite (460), Limestone/Dune (461), Gunmetal (462) Bronze (465).#= Available in ten different colour options.
HEADBOX COMPONENTS
No Code Description
40 24.7209.XXXX H-Box Front Plate
41 24.7208.XXXX H-Box Back Plate
42 24.7212.XXXX H-Box Endcaps Square
43 24.7146.XXXXA Chain Outlet Set
44 24.7207.XXXX Side Channel
45 24.7168.XXXXA Side Channel Top Insert
46 24.7169.XXXXA Side Channel Bottom Set
47 24.7163.0000A Side Channel Fixing Set (Metal)
48 24.7362.1858 H-Box Bracket
Fascia Components
49 24.7008.XXXX Fascia Plate
50 24.7210.XXXX Fascia Bracket
42 24.7212.XXXX H-Box Endcaps Square
48 24.7362.1858 H-Box Bracket
Ellipse Bottom Rail Components
9 32.379.200 Double Sided Bottom Rail Spline
10 24.7218.XXXX# Ellipse Bottom Rail
11 32.455.XXX Bottom Rail End Caps
SIMPLY SMARTER BY DESIGN
EDGE Components and Dimensions
HEADBOX CAPACITY
37mm Tube (Blind Width < 2600) Fabric Thickness < 0.55mm 3.3m drop
Fabric Thickness < 0.75mm 2.8m drop
50mm Tube (Blind Width > 2600) Fabric Thickness < 0.55mm 2.4m drop
Fabric Thickness < 0.75mm 1.9m drop
LIMITATIONS
21mm
Blind Width
Tube/Cloth Width
15mm
84mm
89m
m
Side Channel Dimensions26
.8m
m
16.8mm
63.5mm
26.8
mm
Headbox Dimensions
HEADBOX SYSTEM
luxaflex.com.au16
51
2
2
51
1
1
4
4
5
5
4
4
EDGE Components and Dimensions
DUAL ROLLER SYSTEM
REVERSE BRACKET OPTIONSSTANDARD BRACKET OPTIONS
COMPONENTSTwo Dual Bracket systems are available. The standard roll
bracket has been designed to keep your blind skins as close
to the window as possible, whilst the reverse roll bracket
provides a self pelmet effect and is ideal for use with fabrics
that have a neutral toned backing.
Blinds can be installed using either same side or opposite
end controls.
System options
51 52
Dual Bracket Components
No Code Description
51 24.7363.XXXX Std Roll Dual Bracket
52 24.7364.XXXX Rev Roll Dual Bracket
XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459).
SIMPLY SMARTER BY DESIGN
EDGE Components and Dimensions
LIMITATIONS
DUAL ROLLER SYSTEM
Minimum width single blind 500mm
Minimum width single blind with booster spring 750mm
Minimum width single motorised blind (Switch) 650mm
Minimum width single motorised blind (RTS) 690mm
Maximum width single blind Please refer to the pricing guide as this is fabric dependent.
Minimum drop single blind 300mm
Maximum drop single blind Please refer to the pricing guide as this is fabric dependent.
Maximum drop dual bracket 3,000mm
NOTE:
Braket cover will increase light gap by 5mm.
18mm
Blind Width
Tube Width
12mm
DUAL ROLLER DIMENSIONS
Reverse Roll Bracket
Standard Roll Bracket
160mm
99mm
92mm
155mm
DUAL ROLLER SYSTEM
luxaflex.com.au18
Drive and Idle Components
No Code Description
53 24.7355.0952A HD Bracket Adapter
54 24.7371.0005A HD Motor Plate
55 24.7378.1858 Motor Adaptor Kit 65mm Hd M50
56 24.7326.0000 65Mm Tube Drive Adaptor
Not Shown 24.7361.0000 65Mm Tube Crown Adaptor
Not Shown 24.7354.0000A Motor Adaptor Kit 65mm Somfy 50
58 24.7311.XXXXA HD 65 Idle End Adjustable
Aluminium Tube & Bracket Components
57 24.7060.0000 65mm TUBE
59 24.7390.1858 HD Bracket 55mm Black
Not Shown 24.7302.1858A HD Bracket 75mm Black
60 24.7304.XXXXA HD Bracket Cover 55mm
Not Shown 24.7306.XXXXA HD Bracket Cover 75Mm Black
61 24.7398.1858A HD Bracket Screw Cover Black
62 24.7344.7060A HD Integrated Leveler
Linked Blind Components
63 24.7323.XXXXA HD Aligner Set
64 24.7316.XXXXA HD Tube Plug Connector
65 24.7305.XXXXA HD Bracket Cover 55mm - Linkd
Not Shown 24.7397.XXXXA HD Bracket Cover 75mm - Linkd
XXXX = Avaliable in White and Black
59
6561
6061
59
58
57
64
6359
58
57
55
5453
60
61
56
COMPONENTS
System options
62
EDGE Components and Dimensions
HEAVY DUTY ROLLER SYSTEM
The LUXAFLEX® Heavy Duty Roller
Blind Hardware System can operate
large blinds up to 3800mm in width and
5500mm in drop with a wide selction of
motors.
The heavy duty system is available
in either 55mm or 75mm heavy duty
bracket options.
SIMPLY SMARTER BY DESIGN
System Width
Blind Width
90mm
100mm
90mm
120mm
Blind Width
Tube/Cloth Width Tube/Cloth Width
55mm Bracket Dimensions
75mm Bracket Dimensions
See below 39mm 17mm
MOTOR TYPE LIGHT GAP
HDQ/HDQ65/HDR/HDR65/SR/SS 23mm
SR65/SS65 25mm
Note: Bracket cover will increase light gap by 2mm on each end
LIMITATIONS
Maximum Number of Links 3
Minimum Width Single Blind 1000mm
Maximum Width Single Blind 3800mm
Minimum Drop Single Blind 300mm
Maximum Drop Single Blind 5500mm
EDGE Components and Dimensions
HEAVY DUTY ROLLER SYSTEM
LIGHT GAPS & LIMITATIONS
* Please refer to table below for light gap variations based on different options.
luxaflex.com.au20
EDGE Measuring Deductions Guide
To simplify the ordering process all measuring deductions will be made automatically in the factory. All you need to do is enter the size of
the opening you wish your blind to cover on the order form. The exception to this is 90 degree corners and bay windows.
CornersNOTE: FOR WINDOWS IN REVEAL BRACKETS MUST BE CEILING FIXED FOR DEDUCTIONS TO WORK.
FRONT EDGE
ON FACE
BACK EDGE
Bays
ON FACE
TOP FIX FRONT EDGE
TOP FIX BACK EDGE
Angled Linked Blinds - 90° CornersFACE FIT
CEILING FIT FRONT EDGE of REVEAL
Corners in reveal- front edge Deductions
Through Blind +50mm(from corner)
Butt Blind - 0mm
Corners in reveal- back edge Deductions
Through Blind - 0mm
Butt Blind - 60mm (37mm Tube)
- 80mm (50mm Tube)
Corners on face Deductions (butt blinds)
38mm projection bracket - 75mm
55mm projection Bracket - 90mm
Bays in reveal Deductions
Front edge of reveal - 0mm - 0mm - 0mm
Back Edge of reveal - 22mm - 44mm - 22mm
Bays on face Deductions
38mm projection Bracket - 28mm - 56mm - 28mm
55mm projection Bracket - 33mm - 66mm - 33mm
Angled Link Bay on Face Deductions
38mm projection Bracket - 38mm - 76mm - 38mm
55mm projection Bracket - 43mm - 86mm - 43mm
Angled Link bay in reveal Deductions
Front Edge of reveal - 10mm - 20mm - 10mm
*gap between brackets 30mm approximate
Angled Link Corners on Face
Measure blinds into the corner and deduct 76mm from each blind.
Angled Link Corners in Reveal
Measure from the front edge of reveal and deduct 10mm from each
blind.
in all corner linked situations we strongly recommend that the brackets
are fixed in exact location first and then measured outside edge to
outside edge of the bracket to ensure the gap is minimised.
*Gap between brackets 30mm approximate
Angled Linked Blinds - Bay Window
MEASURE WALL Brackets to be fixed to wall
CEILING FIT FRONT EDGEof reveal
FACE FIT
Deductions are only approximate due to thickness of fabric and drop, for best results install the thru blind then measure for the butt blind.
SIMPLY SMARTER BY DESIGN
CORNERSNote: For windows in reveal brackets must be ceiling fixed for deductions to work.
FRONT EDGE
ON FACE
BACK EDGE
BAYS
ON FACE
TOP FIX FRONT EDGE
TOP FIX BACK EDGE
Deductions are only approximate due to thickness of fabric and drop, for best results install the thru blind then measure for the butt blind.
WIDTH -0
DROP -0
TO SILL -0
PAST SILL -0
TO FLOOR
-0
WIDTH -0
ARCHITRAVE & REVEAL
OUTSIDE FACE
EDGE Heavy Duty Measuring Deductions Guide
MIN WIDTH +130
90mm
+90
BRACKET HD55 BRACKET HD75
82
65
99
88
03-G015
82
65
119
88
Corners in Reveal- Front Edge DeductionsThrough Blind +70mm(from corner)Butt Blind - 0mm
Corners in Reveal- Back Edge DeductionsThrough Blind - 0mm55mm Butt Blind - 95mm 75mm Butt Blind -110mm
Corners on Face Deductions55mm Butt Blind - 105mm75mm Butt Blind - 130mm
Bays in Reveal Deductions
Front Edge of Reveal 55mm HD Bracket - 0mm - 0mm - 0mm 75mm HD Bracket - 0mm - 0mm - 0mm
Back Edge of reveal 55mm HD Bracket - 35mm - 70mm - 35mm
75mm HD Bracket - 40mm - 80mm - 40mm
Bays on face Deductions55mm HD Bracket - 45mm - 90mm - 45mm75mm HD Bracket - 35mm - 110mm - 55mm
luxaflex.com.au22
EDGE Dimensions
OPERATION TYPE LIMITATIONS (FOR SINGLE BLINDS AND LINKED SYSTEMS)
NOTE:
These charts have been calculated using a 400gsm fabric and bottom rail weight of 350g per metre on a 50mm tube. They are provided
as a recommended guide, for further details please refer to your pricing guide.
TUBE CHART
37mm Tube HD37mm Tube 50mm Tube 65mm Tube Not recommended
Motorised
Not recommended
Chain Drive 1:1 (3kg max)
Chain Drive 1.75:1 & Premium Metal Chain Drive 1:1 (3.7kg max)
Chain Drive 1.75:1 W/spring (4.7kg max)
SIMPLY SMARTER BY DESIGN
Luxaflex EDGE Roller Blinds are compatible with all the motorisation options you are most familiar with today.
To order any of the motor options below simply add the ‘order
code’ from the table below in the motorisation column on your
order form.
HDRF MOTORS
HDRF is a wireless motor technology. The range of M40RF motors have an integrated
radio receiver for simple one plug installation. Motors can be configured and operated
from the modern touch sensitive 4 Channel SUITE remote control, or operated from
the motor head for quick setup and operation during installation.
HDRF uses intelligent bidirectional communication between each motor and the
remote control to ensure that operation is always flawless and uninterrupted. HDRF
motors have the ability to simultaneously connect to automation systems or be
controlled via a wall switch, all from the one integrated motor.
MOTORORDER CODE
FEATURESSYSTEM USED
BATTERY 240V SLEV (12V)
EDGE 65
SYSTEM
REMOTE
CONTROL
HDQ65HunterDouglas - M50Q Advanced Automation Motor, bi-directional communication.
EDGE 65
HDR65HunterDouglas - M50RF Superior range, modern sleek Remote Control.
EDGE 65
SR65 Somfy - Atlus 50 RTS motor. EDGE 65
SWITCH
CONTROL
HDS65HunterDouglas - Quiet 4 wire motor for switch or home automation
EDGE 65
SS65Somfy - LT 50 4 wire motor for switch or home automation
EDGE 65
EDGE 50
SYSTEM
REMOTE
CONTROL
HDQHunterDouglas - HDQ Advanced Automation Motor, bi-directional communication.
EDGE 50
HDRHunterDouglas - HDRF Superior range, modern sleek Remote Control.
EDGE 50
SR Somfy - Sonesse RTS motor. EDGE 50
MRMerger - Low Cost remote control solution.
EDGE 50
SWITCH
CONTROL
HDSHunterDouglas - Quiet 4 wire motor for switch or home automation
EDGE 50
SSSomfy - Sonesse 4 wire motor for switch or home automation
EDGE 50
MSMerger - Low Cost 4 wire motor for switch or home automation
EDGE 50
EDGE 37
SYSTEM
REMOTE
CONTROL
SK1 Somfy - Wirefree battery operated. EDGE 37
MR37Merger - Low Cost 12Volt Remote Control
EDGE 37
SWITCH
CONTROLHDS37
HunterDouglas - Premium Super Quiet motor for switch or home automation.
EDGE 37
EDGE Motorisation
luxaflex.com.au24
LUXAFLEX® Fabric Collection
The beautiful Luxaflex Fabric Collection provides you with the ultimate colours and styles from plain to textured weaves, in a range of opacities from light filtering to blockout.
Luxaflex Fabrics are designed to suit your light, glare, heat
and privacy needs, with a range of low VOC (Volatile Organic
Compound) fabrics for those sensitive to the smell of fabrics. Many
fabrics are Sanitized treated - for optimal hygiene and treated with
DURAGUARD® Fabric Protector which effectively repels most stain
causing agents.
With over 400 fabrics to choose from, choosing the fabric for
the Edge roller blind is the determining factor on whether the
blinds blends perfectly with the interior space or stands out as a
prominent feature.
SIMPLY SMARTER BY DESIGN
LUXAFLEX® Fabric Collection
EASY TO CLEAN AND MAINTAIN
Many Luxaflex Fabrics are treated with DURAGUARD® Fabric
Protector, which effectively repels most stain causing agents
with its proven, water based, preventative formula. Your Luxaflex
Window Fashions will
Resist water stains from rain, moisture and
condensation on windows
Resist oily stains from spills or fingerprints
FOR FRESHNESS & WELL BEING IN YOUR HOME
Many Luxaflex Fabrics are treated with Sanitized®
hygiene function, which
Keeps odours away ensuring freshness in your home
Stops mildew and fungi growing on your window
coverings keeping your home clean
Protects against the development of bacteria ensuring
well-being in your home
The Sanitized® Antimicrobial Protection is free of
harmful substances and is recommended by institutions
for allergy sufferers
SUNSCREEN
Sunscreen fabrics allow for heat and light control whilst
maintaining your view. Perfect for reducing glare and heat in a
room exposed to the sun. Layer with blockout fabrics for night
time privacy.
SHEER
Sheer fabrics give daytime privacy and some filtered
view-through subject to the texture and weave.
Layer with blockout fabrics to give night time privacy.
TRANSLUCENT
Translucent fabrics screen out harsh light, but do not allow a
view-through. They bring texture or patterns to light coming
into a room whilst providing daytime and night time privacy.
BLOCKOUT
Blockout fabrics offer the ultimate level of privacy, day and
night whilst helping to insulate the room. Blockout fabrics offer
room darkening capabilities. Ideal for bedrooms and home
theatre / TV rooms.
luxaflex.com.au26
EDGE Product Installation
a
c
b
d1
1. Fix bracket using the screws of your choice 2. Place the chain drive in the bracket (1)
2click
3. Slide it down until it clicks (2). 4. Place the tube adapter on the chain drive. Press the idle
end and lift the blind.
click
5. Snap it to the bracket. Slide the end caps onto the
brackets.
INSTALLATION - STANDARD ROLLER SYSTEM
SIMPLY SMARTER BY DESIGN
1. Make sure that the opening for the Allen key is pointing
downwards before installing the brackets. Change the
orientation by loosening the 2 screws and turning the
leveller 90°. Fix the screws.
2. To adjust skewing, put the provided Allen key into the
screw of the leveller and turn it left or right to move the
blind up or down.
INSTALLATION - STANDARD ROLLER WITH OPTIONAL LEVELLER
EDGE Product Installation
21
1. Slide a screw driver between idle end and the bracket
and then lever the idle end out of bracket while holding
blind.
2. Move the blind down and out of the bracket. Blind will
disengage from chain drive.
3. In face push the pin of the chain drive and take the
chain drive out of the bracket.
OR In reveal place a screw driver under the pin of the chain
drive and pull it outwards. Take the chain drive out of the
bracket.
REMOVAL - STANDARD ROLLER SYSTEM
luxaflex.com.au28
EDGE Product Installation
3. Slide linked bracket cover over bracket. Slide the
connector part through the bracket into the idle end.
4. Place the tube adaptor on the aligner or connector head.
2
1
click
2 1
3
5. Press the spring loaded idle with locking ring end and lift
the blind and snap it to the bracket.
6. To align the bottom rails, push the blind against the idle end
(1), turn the blind, level the bottom rail with the other one (2).
Release to fix the position (3).
NOTE: This is not possible when using the standard straight
connector set.
7. Secure the blind by turning the locking ring on the idle
end to prevent it from contracting. Slide the end caps onto
the brackets.
1. Unfasten the locking ring. Slide a screw driver between
locking ring and bracket then push the idle end in the
aligner direction.
2. Move the blind down and out of the bracket. Pull the aligner
or connector out of the idle end.
REMOVAL - LINKED BLINDS
1. Place the tube adaptor on the chain drive head. Press
the idle end and lift the blind.
2. Fix the outer bracket with the screws provided.
INSTALLATION - LINKED BLINDS
SIMPLY SMARTER BY DESIGN
EDGE Product Installation
1. Install the main blind with the linked end cap. 2. Slide the 45º - 90º joint through the bracket into the idle
end.
X
3. Place the inner bracket with the linked end cap
horizontally to the bracket of the main blind and fix it with the
screws provided.
4. The maximum distance between bracket and cardan
joint is X = 40 mm.
5. Fix the outer bracket with the screws provided. 6. Slide the idle end onto the hexagon of the 45º - 90º joint.
NOTE: Level the bottom rail with the other before
installation.
21
click
7. Slide the idle end onto the hexagon of the 45º - 90º joint.
NOTE: Level the bottom rail with the other before installation.
8. Fix the blind by turning the locking ring (on both sides)
against the idle end. Slide the end cap onto the bracket.
> 45°
9. Loosen the screw from the stopper (90º joint). The angle
between the hexagon and the cardan should not exceed
45º. The axes of the blinds should cross in the middle of the
cardan. Fix both stoppers when using 90º joint.
INSTALLATION - UNI JOINT BLINDS
luxaflex.com.au30
EDGE Product Installation
1. Fix headbox back plate to wall by drilling through extrusion
and slide brackets into keyway.
2. Slide end caps into the headbox back plate.
3. Clip headbox front plate inside keyway at the top of the
back plate. NOTE: End cap removed for demonstration only.
4. Clip headbox front plate into place to secure the endcaps.
X = max. 500 mm
1. Level the side guiding channel flush with the headbox end
cap. Mark this position.
2. Fix the lower clip - and clips at 500 mm intervals - before
installing the channel.
click
3. Place the bottom rail into the side guiding channel. 4. Snap channel into clips. In reveal installations screw
straight through the side channel.
INSTALLATION - HEADBOX SYSTEM
INSTALLATION - SIDE CHANNELS ON FACE
SIMPLY SMARTER BY DESIGN
a
c
b
click
1. Fix the bracket with the screws provided
a) recess b) ceiling c) wall
2. Slide the cover cap onto the bracket until it snaps. The fasteners of
the bracket ring must be open.
21
12
click
3. Place the blind with the bearing onto the bracket. Push the blind
against the bearing and lift the blind up until the motor front plate
fits the bracket ring.
4. Turn the blind (10°) in the rolling off direction and close both
fasteners of the bracket ring. Make sure that limit switches are
accessible.
click
5. Fix the blind by turning the locking ring against the bearing. 6. Slide the end caps onto the brackets. Make sure that the end caps
snap onto the brackets.
INSTRUCTIO
7. Connect the motor and controls in accordance with separately
provided instructions.
INSTALLATION - HEAVY DUTY ROLLER BLIND SYSTEM
EDGE Product Installation
luxaflex.com.au32
EDGE Product Installation
1. Disconnect the motor. Lift the backside of the end cap and slide it towards you.
2. Unfasten the locking ring.
REMOVAL - HEAVY DUTY ROLLER BLIND SYSTEM
1
2 2 1
3. Open both fasteners of the bracket ring.
4. Turn the blind in the roll up direction until the front plate gets out of the bracket ring.
5. Push the blind against the bearing and slide it out of the bracket.
1. Change the orientation to ensure that the opening for the Allen key is pointing downwards before installing the brackets.
2. Fix the leveller with the screws provided.
3. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand.
INSTALLATION - HEAVY DUTY LEVELLER
SIMPLY SMARTER BY DESIGN
EDGE Product Installation
1. Install the main blind with the coupling end cap. 2. Fix the outer bracket with the screws provided. Slide the cover cap onto the bracket until it snaps.
INSTALLATION - HEAVY DUTY LINKED BLINDS
3. Slide the aligner or the connector through the bracket into the idle end.
4. Only for coupling with 2 intermediate brackets! Fix the inner bracket with the screws provided. Slide the aligner through the bracket into the bearing.
5. Place the tube adapter on the aligner or connector head.
6. Press the bearing, lift the blind and snap it to the bracket. 7. To align the bottom rails:(1) push the blind against the bearing. (2) turn the blind, level the bottom rail with
the other one.(3) release to fix the position.
click
9. Fix the blind by turning the locking ring against the bearing.
10. Slide the end cap onto the bracket. Make sure that the end cap snap onto the bracket.
luxaflex.com.au34
EDGE Product Installation
1. Lift the backside of the end cap and slide it in your direction.
2. Unfasten the locking ring. Slide a screw driver between locking ring and bracket and push the bearing in the aligner direction.
3. Move the blind downwards out of the bracket. Pull the aligner or connector out of the bearing.
REMOVAL - HEAVY DUTY LINKED BLINDS
Sanitized® and the Sanitized® symbol are trademarks of Sanitized AG, Switzerland, registered in numerous countries.
© Copyright 2013 Hunter Douglas Limited [ABN 98 009 675 709] ® Registered Trade Marks of Hunter Douglas Limited
Somfy is a registered trade mark of SOMFY Pty Limited 10/2013
5YEAR WARRANTY
*Refer to www.luxaflex.com.au for warranty document.
SMARTER BY DESIGN