lumidas-b 6w dimmable lamp - fawootech.cz · lumidas-b 6w dimmable ... • optimization of parts...

No. TM-DBL06-EN-001

LumiDas-B 6W Dimmable LampLED Integral Replacement Lamp

Technical Manual

Copyright ⓒ 2010 Fawoo Technology. All rights reserved. Unauthorized use, alteration, or copying of these materials is prohibited.

The data presented in this manual is the product of testing by Fawoo Technology's testing equipment using methodology based on the LM79 standards.

This technical manual is available to customers. Please contact your sales or technical representatives in your region.

LumiDas-B 6W Dimmable Lamp Technical Manual

1. Product Description2. Drawing & Components3. Specifications

3.1. Naming Convention 3.2. Electrical Characteristics & Size 3.3. Photometric Characteristics & Average Lifetime3.4. LED Chip Specifications

4. Illumination Data 4.1. Polar Diagram4.2. Cone Diagram4.3. Iso-lux Diagram4.4. Chromaticity Diagram&Wavelength Spectrum

5. Installation & Warnings6. Warranty

Appendix A. AccessoriesA.1. E26 Extension Socket : Standard TypeA.2. E26 Extension Socket : Long TypeA.3. Recessed Can Type Fixture

Appendix B. Reliability Testing DataB.1. Contact Current TestB.2. EMI, EMS TestB.3. Electrical Characteristics TestB.4. Temperature Test

Appendix C. Operation Temperatures

2

… 3… 4… 5… 5… 5… 5… 6… 7… 7… 8… 9… 10… 11… 13

… 14… 14… 14… 15

… 16… 16… 16… 16… 17

… 18

Contents

LumiDas-B 6W Dimmable Lamp Technical Manual 3

1. Product Description

LumiDas-B 6W Dimmable Lampis a highly efficient bulb type LED replacement lamp

• Replaces 40W incandescent lamps and equivalent CFL lamps • Lamp body is made of plastic, thus electrically safe and light • Optimization of parts and design drastically reduces manufacturing costs• Effective thermal management systems with optimal heat dissipation design• Plastic lens body and inside metal layers maintain superb luminance • Uses LED modules with good Tc temperature and thermo-resistant coefficients which increase longevity and reliability.

• Natural lighting available with a dimming function• Compatible with general TRIAC dimmers for dimming• Adjusts light output from 10% to 100% of original light output. The range of dimming differs by dimmer.

• Saves additional electricity consumption by dimming • High lumen outputs and high lumen efficacy • Looks like a bulb type and usable as a bulb type(as R, BR, and ER reflector incandescent lamps)

• Usable at ordinary E-base fixtures and recessed bulb type can fixtures• Extension socket available

Usage Replacement lamps for incandescent lamps used in homes and offices Downlight and decorative lamps for general lighting, hotels, hospitals, shops,

and restaurants

Ideal Replacement Lamp for Bulb Type Lamp with Dimming Controls


[ FRONT ] [ TOP ] [ DOWN ]

No Description Material Etc.

① LENS PC -

② DECO RING ABS Silver

③ CAP PC White

④ BASE BRASS E26/E27

DBL06-100/120VE26SDBL06-200/240VE27S

DBL06-100/120VEGU10SDBL06-200/240VEGU10S


① LENS PC -

② DECO RING ABS Silver

③ CAP PC White

④ BASE PBT+BRASS GU10

[ FRONT ] [TOP] [DOWN]

2. Drawings & Components

1) Download DWG file (AutoCAD v. 2002) 2) Real-size drawings in the file formats provided above can be used to examine lighting designs and the lamp's

compatibility with fixtures.

http://fawoo.co.kr/light_kr/images/product/dwg/lumidas_b/dbl06_dwg.zip�




DBL 06 -100/120V200/240V

E26E27

GU10S (

WP

)

Series WattInput

VoltageBase Sleeve

5

3. Specifications

3.1. Naming Convention

3.2. Electrical Characteristics & Size

Color Temp.(Warm/Pure)

ModelPower

Consumption(W)

InputVoltage(Vac)

RateCurrent

(A)

Power Factor(PF)

Freq(Hz) Base Diameter

(mm)Length(mm)

Weight(g)

DBL06-100/120VE26S(W)DBL06-100/120VE26S(P)

6±10%

120 0.1 ≥0.9

50/60

E26

ø63

109.5±2

130±5DBL06-200/240VE27S(W)

DBL06-200/240VE27S(P)230-240

0.04 ≥0.75 E27

DBL06-100/120VGU10S(W) DBL06-100/120VGU10S(P)

120 0.1 ≥0.9

GU10109.2

±2127±5DBL06-200/240VGU10S(W)

DBL06-200/240VGU10S(P) 230-240

0.04 ≥0.75

1)Product characteristics may vary slightly within tolerable ranges. These variations do not impact electrical safety. 2)Power input ranges of DBL06-100/120V vary by country (Japan 100V, U.S 120V) for more effective dimming. 3)In the same way, Power input ranges of DBL06-200/240V vary by country(Korea 220V, EU 230-240V) for more effective dimming. 4)Dimming controls light output from 10% to 100%. The range of dimming differs by dimmer. If used in a good quality dimmer,

light output can be dimmed to 10%; light output can be dimmed to 20% when used with a low quality dimmer. 5)DBL06-100/120VE26S, DBL06-100/120VGU10S have a 120V input model for the U.S. 6)DBL06-100/120VGU10S, DBL06-200/240VGU10S can be used in a recessed-can with a fixture adopter(compatible with 3 inch fixture)

developed by Fawoo Technology.7)DBL06-100/120VGU10S, DBL06-200/240VGU10S have a diameter of ø65mm, the values in the specifications is the diameter of the lens.

3.3. Photometric Characteristics & Average Lifetime

ModelBeamAngle

(°)

Color Temp.(K)

CRI(Ra)

Luminous Flux(lm)

LuminaireEfficacy(lm/W)

AverageLifetime

(h)

Recommended operationTemp.8)

(℃)

Maximum OperationTemp.9)

(℃)

OperatingHumidity

(%)

DBL06-100/120VE26S(W)DBL06-100/120VGU10S(W) DBL06-200/240VE27S(W)

DBL06-200/240VGU10S(W) DiffusionType

2899 82.5342 60.8

30,000~50,000

-20~35

-30~50

5~90

354 61.8

DBL06-100/120VE26S(P)DBL06-100/120VGU10S(P)DBL06-200/240VE27S(P)

DBL06-200/240VGU10S(P)

5044 73.1426 72.5

424 72.8

8) Recommended operation temperature means the ambient temperature of the environment where the lamp is installed. When a lampis used at the ambient operation temperature and relative humidity, an average warranted lifetime of the lamp is guaranteed.

9) While the lamp operates on the maximum and minimum operation temperature, its lifetime and light output can be reduced if thelamp is used at the maximum/minimum temperature for an extended period of time. It may cause a malfunction. Details are explained in Appendix C.

10)The electrical and photometric characteristics are measured by Fawoo Technology's testing equipments and methodologies based on LM79 standard. The provided test results may differ slightly from actual products performance within tolerable ranges.


3. Specifications

3.4. LED Chip1) Specifications

Color Temperature (K) CRI (Ra) Notes

Top ViewLED

Warm 3000 85

Pure 5300 72

1) The LED chips used in Fawoo's LED lamps are produced by world-class LED manufacturers like Nichia. The use of top quality LEDs from licensed manufactures of white LEDs increases life and reliability.


DBL06-100/120VE26S(W)DBL06-100/120GU10S(W)

DBL06-100/120VE26S(P)DBL06-100/120GU10S(P)

DBL06-200/240VE27S(W)DBL06-200/240GU10S(W)

DBL06-200/240VE27S(P)DBL06-200/240GU10S(P)

4.1. Polar Diagram

7

0°

90°

180°

270°

0°

90°

180°

270°

0°

90°

180°

270°

0°

90°

180°

270°

10cd

30cd

50cd

70cd

90cd

10cd

30cd

50cd

70cd

10cd

30cd

50cd

70cd

10cd

30cd

50cd

70cd

90cd

4. Illumination Data

1) Download IES File DBL06-100/120VE26S, DBL06-200/240VE27S, DBL06-100/120VGU10S ,DBL06-200/240VGU10S

2) Data used in the above IES file was measured at Fawoo Technology’s Photometric Analysis Center

0-180° Cut Plane

90-270° Cut Plane

http://fawoo.co.kr/light_kr/images/product/ies/lumidas_b/dbl06_ies.zip�


At 1m, the maximum luminance is 67.53lx Center and outer-ring luminance level, from a point of 3m height at 0.5m interval


DBL06-100/120VE26S(W)DBL06-100/120GU10S(W)

DBL06-100/120VE26S(P)DBL06-100/120GU10S(P)



DBL06-200/240VE27S(W)DBL06-200/240GU10S(W)

DBL06-200/240VE27S(P)DBL06-200/240GU10S(P)

4.2. Cone Diagram

8






Luminance distribution of the lamp mounted at a point of 3m height on a surface of a square of width x height (3mx3m)(7.31lx ~ 3.74lx)


DBL06-100/120VE26S(W)DBL06-100/120GU10S(W)

DBL06-100/120VE26S(P)DBL06-100/120GU10S(P)



DBL06-200/240VE27S(W)DBL06-200/240GU10S(W)

DBL06-200/240VE27S(P)DBL06-200/240GU10S(P)

4.3. Iso-Lux Diagram

9






X = 0.4449, Y = 0.4073, CCT(K) = 2899.4, CRI = 82.5

X = 0.3444, Y = 0.3572, CCT(K) = 5044.6, CRI = 73.1

DBL06-100/120VE26S(W)DBL06-200/240VE27S(W)

DBL06-100/120VGU10S(W) DBL06-200/240VGU10S(W)

DBL06-100/120VE26S(P)DBL06-200/240VE27S(P)

DBL06-100/120VGU10S(P)DBL06-200/240VGU10S(P)

DBL06-100/120VE26S(W)DBL06-200/240VE27S(W)

DBL06-100/120VGU10S(W) DBL06-200/240VGU10S(W)

DBL06-100/120VE26S(P)DBL06-200/240VE27S(P)

DBL06-100/120VGU10S(P)DBL06-200/240VGU10S(P)

4.4. Chromaticity Diagram&Wavelength Spectrum

10


1) Data used in the above IES file was measured at Fawoo Technology’s Photometric Analysis Center.


5. Installation & Warnings

Please read this section carefully before installation for safe use.

Before installing the lamp, check installation socket for defects.

Make sure the input power and base are suitable for the LumiDas-B lamp.

To prevent damage and/or external shocks, DO NOT allow sharp materials to come into contact with the lamp surface.

DO NOT expose lamp or installation socket to direct heat.

Make sure to have proper ground wiring to prevent unintentional short circuit/electrical leakage.

The power must be disconnected when installing or making adjustments to the lamp.

Gently turn the lamp clockwise when installing it into the fixture.

After installation, be sure that the lamp looks sturdy and is completely in the socket.

DO NOT use chemical cleaners on the lamp.

DO NOT disassemble the lamp without the presence of an authorized person.There are NO user-serviceable parts inside; tampering with them may causefire and/or electric shock.

The lamp is for indoor use only.

When the lamp is installed in an enclosed space, the temperature of the lamp increases resulting in a shorter lifetime. If you wish to install the lamp in an enclosed space please consult sales persons/customer service department.

Fawoo Technology will take a responsibility for any defects and malfunction when the user complies with above installation methods and cautions.

11


LumiDas-B is not dimmable without the dimmer. You need a dimmer to dim the lamp.

If flickering occurs during dimming, adjust the switch at the location/level where flickering does not occur.

You may hear some light noise when using a dimmer, but this is not abnormal.

Changes in light output and wattage consumption of a dimmable lamp are different from those of incandescent lamps.

Reducing the light using dimmers does not prevent consumption of electricity. We recommend turning off the switch when the lamp is not in use for long periods of time.

When turning on the lamp when the dimmer is set to 0%, the light may not come on instantly. Setting the dimmer 100% will allow the lamp to become lit as soon as it is turned on.

Flickering or trembling can occur when there is a change in input electricity. Using a hair dryer, a vacuum cleaner, or microwave can affect the electricity and may cause flickering or trembling.

Some dimmers may cause flickering and provide different range of dimming. Dimmer capacity determines the maximum number of lamps per dimmer.

Considering dimming efficiency, it is recommended that you use a maximum of 6 lamps. (More than 6 lamps can be connected to a dimmer, but dimming range is reduced to 50%)

12

Capacity of Dimmer Input Voltage Over 200W Over 400W Over 500W Over 800W

Maximumnumber

100-120V 20 30 40 50

200-240VConsidering dimming efficiency, 6 lamps are recommended at maximum. (More than 6 lamps can be connected to a dimmer, but dimming range is reduced to 50%)

Dimmers can be adjusted from 10% to 100%. Range of dimming depends on the performance of dimmers.

When multiple lamps are connected to a dimmer, the lamps turn off at slightly different times at 10% level.

When a dimmer is set at a low level, the lamp may not turn on. In this case, set the dimmer level to 100% and turn on the lamp.

5. Installation & Warnings

About Dimming


6. Warranty

Warranty Period:3 years from the date of purchase from an authorized retailer

Warranty covers:

• Defects discovered while using the lamps under normal and recommended

operating conditions during the warranty period.

• During the given warranty period, we will repair

or exchange defective parts or products at no cost.

Warranty does not cover:

• Defects that are discovered after the warranty period expires

• Defects that are caused by natural disasters and accidents

• Defects that are caused by negligent handling by users

Negligent handling includes but is not limited to:

• Any unauthorized disassembly

• Any accidental impact or shock

• Negligent handling, moving and installing

• Installing in an improper place which is unable to sustain the weight of the lamp

• Installing into an excessive input voltage out of the designated input voltage

range

• Loss of warranty or omission of required information on the warranty

13


[ FRONT ] [ DOWN ]

①

②

ES-26S

A.1. E26 Extension Socket : Standard Type (Model : ES-26S)

A.2. E26 Extension Socket : Long Type (Model : ES-26L)

[ FRONT ] [ DOWN ]

②


① CAP PBT White

② BASE BRASS E26

ES-26L No Description Material Etc.

① CAP PBT White

② BASE BRASS E26

Appendix A. AccessoriesBy using an extension socket for LumiDas-B series, you may apply LumiDas-B 6W lamp in more varied and extensive fixtures. ES-26S and ES-26L extension socket obtained KC electrical safety certification.

①

14

1) Download DWG file (AutoCAD v. 2002) 2) Real-size drawings in the file formats provided above can be used to examine lighting designs and the lamp's

compatibility with fixtures.





BF-03S

A.3. Recessed Can Type Fixture (BF-03S)

1) Download DWG file (AutoCAD v. 2002)


① HOLDER AL

② SNAP RING SWRCH

③ GUIDE SPRING SPRING STEEL

[ FRONT ] [ DOWN ]

ModelOuter-ling Diameter

(mm)Inner-ring Diameter

(mm)Weight of Fixture

(g)

BF-03S 82 75 50±5

Appendix A. Accessories Recessed-can type fixture developed by Fawoo Technology(compatible with 3 inch can) and GU10 base LumiDas-B lamp can be used together to install the lamp into an existing recessed-can fixture. The drawing below shows the shape and the size of the installed LumiDas-B lamp in a recessed-can.

LumiDas-B lamps with E26/E27 bases cannot be used in a recessed-can fixture, and need to be connected to a separate Edison base socket to be installed in existing recessed-can fixtures on a ceiling.





Contact current value : 5µA (0.005mA)

It registers far below the standard contact current values(0.7mA)

designated by IEC standards on integral LED lamps.

B.1. Contact Current Test

EMI conducted noise value and EMS conducted noise value satisfy IEC-55015/CISPRI 15 and IEC-55022/CISPRI 22.

B.2. EMI, EMS Test

Test Result Test Data

Surge Test PASSED Passed 1kV test.

Insulation Resistance Test

PASSED

Tested by an insulation resistance tester after being stored in climate controlled equipment under temperature of 30℃ and a humidity of 95% for more than 48 hours. Themeasured values are below the reference value of 2㏁.

ESD Test PASSED Tested and passed by IEC/KN 61000-4-2 Level 3 standard.

Abnormal Transient Voltage

TestPASSED

Tested and passed at abnormal transient voltage of 132V and 90V.

B.3. Electrical Characteristics Test

TDS

Center 515 MHz Span 970 MHz97 MHz/

A

LVL

1 PKMAXH

0

10

20

30

40

50

60

70

1

Marker 1 [T1 ] 21.06 dBµV 130.880000000 MHz

F2

TH 26.42 dBµV

CLASS A

CLASS B

Date: 12.JAN.2010 08:58:20

Appendix B. Reliability Testing Data

The electrical safety and photometric performance test results are measured at the Fawoo Technology Reliability Center with appropriate equipment and standard measurement methods. The test results show that the lamps are safe for use, reliable and efficient.

LumiDas-B 6W has no contact current. It has passed an electrical surge test, noise test, and ESD test.


B.4. Temperature Test

Tested after a lamp is installed in an open socket

Tested in a closed paper box

Installation Directions

Downward horizontality upward Downward horizontality upward

Ambient Operating

Temperature33℃ (Normal Temperature)

40℃ (Internal temperature, @Ta=33℃)

LED#1Lead Frame

86.4 87.6 86.9 89.7 89.6 89.6

LED #2Lead Frame

81.8 82.8 82.0 86.8 87.4 86.6

ICDriver 95.9 96.5 95.4 100.8 101.3 100.3

Resistance 92.6 93.7 92.6 96.5 96.6 97.0

Power Consumption

5.8-5.9W 5.8-5.9W

17

Appendix B. Reliability Testing Data

Each electronic part of the driver maintains its guaranteed temperature.

When tested at an ambient operating temperature from multiple directions, the temperature of the LED lead frame is 81~86℃. (@Ta = 33℃)

To guarantee the lifetime of LED lamps, Tj temperature should be maintained at below 110℃. The Tj test result is 96~101℃ regarding heat dissipation coefficiency. Therefore, the expected lifetime is guaranteed when the lamp is used in an open(not-closed) fixture/space at an ambient operating temperature.

When tested in a closed, paper box, Tj temperature rises and the expected lifetime is reduced to 25,000 hours. Using the lamp in a closed fixture of space is not recommended.


C.1. Operation Temperatures

18

Recommended operation temperatureRecommended operation temperature means the ambient temperature of the environment where the lamp is installed. When a lamp is used at the ambient operation temperature and relative humidity, an average warranted lifetime of the lamp is guaranteed.

If the lamp operates temporarily out of the recommended operation temperature, but within the range of the maximum and minimum operation temperatures, the lamp operates normally. However, a temporary flickering or instant blackout can occur by protective circuits.

Maximum Operation TemperatureThe maximum temperature at which the lamp operates. If the lamp is used at the maximum temperature for an extended period of time, its lifetime and light output can be reduced, and it may cause a mechanical trouble at worst.

If the lamp operates at the freezing temperature, a temporary flickering can occur when the lamp is turned on.

If the lamp is turned on and off frequently at the freezing temperature, electronic circuits of the lamp can be damaged. Please wait for a second when turning a lamp if a temporary flickering occur or lighting blackout occurs.

C.2. Average Expected Lifetime by Temperature

Average expected lifetime is an estimated lifetime by measuring the rated temperatures of electronic devices of LED modules and driver circuit at various operation temperatures at 5℃ interval, setting the recommended operation temperature as a baseline.

When existing conventional lamps (such as, incandescent lamps, discharge lamps, fluorescent lamps) are used at high or low operation temperature, the lifetime and light output of the these lamps are also significantly reduced generally, and even sometimes the lamp can be broken.

Appendix C. Operation Temperatures

ModelAverageLifetime

(h)

Recommended operation Temp.

(℃)

Maximum Operation Temp.

(℃)

Operating Humidity

(%)

DBL06 30,000~50,000 -20~35 -30~50 5~90

Model Temp. RangeAverage Expected

Lifetime Notes

DBL06

50℃ 55% -

45℃ 70% -

40℃ 85% -

-20~35℃ 30,000~50,000hrRecommended

Operation Temperature

-25℃ 85% -

-30℃ 80% -

Fawoo Technology Co., Ltd739-8, Ojeong-dong, Ojeong-gu, Bucheon, Gyeonggi-do, Republic of Korea (zip) 421-170

TEL : +82-32-670-3100(Europe&Asia) / 617-303-0231~4(U.S.A.)FAX : +82-32-670-3100URL : http://www.fawoo.com/light_en/

Contents of this technical manual can be changed without notice.

http://www.fawoo.com/light_en/�

lumidas-b 6w dimmable lamp - fawootech.cz · lumidas-b 6w dimmable ... • optimization of parts...

Documents