lu95r industrial coated solid suface blades
TRANSCRIPT
800 / 334-4107
• Freud’s LU95R features triple chip teeth with aspecial side-grind for leaving swirl-free cuts
in solid surface materials such as Dupont®,Corian®, Wilsonart Gilbralter®, and SSV
Fountainhead®
• Laser-cut anti-vibration slotsdrastically reduce vibration andsideways movement in the cutextending blade life and giving acrisp, swirl-free flawless finish
• Micrograin carbide tips thickenough for several sharpeningsand tri-metal brazing for impactresistance ensure the longestlife
• Thick micrograin carbide tips
• Laser-cut blade bodies, anti-vibration and expansion slots
• Perma-SHIELD® coating
• Covered by Freud's LimitedLifetime Warranty
FULL KERF
1/8"
ANTI-VIBRATION
DESIGN
FOR SWIRL AND BURN FREE CUTS
MADE IN ITALY
INDUSTRIAL
MTCG
ITEM No. LU95R010
Fair Good Excellent
Solid SurfacePlexiglassVinyl
ChipboardPlywood
Laminate
Non-FerrousNot Recommended
Alwaysuses
Not recommended for
Before using, read all
warni
ngs
inm
achi
nem
anua
l &bl
ade
pack
age.
ferrous metals or masonary.
Copyright of
Freud Inc.1990
LU95R Industrial Coated Solid Suface Blades
Item Dia Teeth Arbor Kerf PlateLU95R008 8" 60 MTCG 5/8" .126 .087LU95R010 10" 72 MTCG 5/8" .126 .087LU95R012 12" 84 MTCG 1" .126 .087LU95R014 14" 96 MTCG 1" .138 .098Hook Angle = 0˚
• Freud’s LU95M features triple chip teeth with aspecial side-grind for leaving swirl-free cuts
in solid surface materials such as Dupont®,Corian®, Wilsonart Gilbralter®, and SSV
Fountainhead®
• Laser-cut anti-vibration slotsdrastically reduce vibration andsideways movement in the cutextending blade life and giving acrisp, swirl-free flawless finish
• Micrograin carbide tips thickenough for several sharpeningsand tri-metal brazing for impactresistance ensure the longest life
• Laser-cut blade bodies, anti-vibration and expansion slots
• Kickback reducing design
• Covered by Freud's LimitedLifetime Warranty
FULL KERF
1/8"
ANTI-VIBRATION
DESIGN
FOR SWIRL AND BURN FREE CUTS
MADE IN ITALY
INDUSTRIAL
MTCG
ITEM No. LU95M010
Alwaysuse
Not recommended for
Before using, read all
warni
ngs
inm
achi
nem
anua
l &bl
ade
pack
age.
ferrous metals or masonary.
Copyright of
Freud Inc.1990
Fair Good Excellent
Solid SurfacePlexiglassVinyl
ChipboardPlywood
Laminate
Non-FerrousNot Recommended
LU95M Industrial Solid Suface Blades
Item Dia Teeth Arbor Kerf PlateLU95R008 8" 60 MTCG 5/8" .126 .087LU95R010 10" 72 MTCG 5/8" .126 .087LU95R012 12" 84 MTCG 1" .126 .087LU95R014 14" 96 MTCG 1" .138 .098Hook Angle = 0˚
20
40T
PURPOSE SAW BLADE
rf Woodworking Saw Blade
" Arbor ITEM #
TK306 sawb
lade
sAvanti™ Saw BladesEnthusiast Woodworker Series
Freud’s Thin Kerf Avanti Series of blades gives a
precise, quality cut for most every cutting
application. The advanced thin kerf design removes
less material, reducing the strain on your equipment
and increasing the life of your saw. This slim design
requires less cutting power from both you and the
saw, making it ideal for underpowered saws.
• Ultra fine crosscuts for velvety smooth finish
• The Freud TK800 series blades are ideal forcabinet and furniture making. Use these
blades for the best possible finish whencrosscutting fine moldings and intricatewood parts
• Micrograin carbide tips thickenough for several resharpenings
• Thin Kerf uses less power
• Kickback reducing design
• Extra Sharp positive ATB ToothDesign gives an exceptionally long
cutting life
• Laser-cut blade bodies andexpansion slots
• Covered by Freud's Limited LifetimeWarranty
10"
80T
mm
HiATB
ULTRA FINE CROSSCUT
Premium Thin Kerf Woodworking Saw Blade
5/8" ArborMA
X. R
PM: 7,000
TALY
Fair Good Excellent
OODWOODD
Not Recommended
tion meeting CSA Z94.1 or ANSI Z87.1.
s are damaged or missing. Obey all
e machine manual & blade package.
ITEM #TK806
• Sliding compound miter saws & radial arm saws
• Give your Sliding Compound Miter Saw aperformance boost with genuine Freud
TKR600 blades. These specially designedblades feature legendary Freud quality and
have more teeth than most originalequipment blades to give thesmoothest cut and longest life
• Thick micrograin carbide tips
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Specially Designed Hook Anglegives a controlled cut and anexceptional finish on the top & bottom
of material
• Covered by Freud's Limited LifetimeWarranty
10"
60T
mm
ATB
SLIDING MITER FINISHING BLADE
Premium Thin Kerf Woodworking Saw Blade
5/8" Arbor
MA
X. RPM: 7,000
ALY
Fair Good Excellent
ODOOD
Not Recommended
ection meeting CSA Z94.1 or ANSI Z87.1.
ips are damaged or missing. Obey all
the machine manual & blade package.
ITEM #TK606
TK600 Avanti Sliding CompoundMiter/Radial Saw Blades
Item Dia Teeth Arbor Kerf PlateTK806 10" 80 ATB 5/8" .098 .071Hook Angle = 15˚
Item Dia Teeth Arbor Kerf PlateTK604 81/2" 60 ATB 5/8" .087 .063TK606 10" 60 ATB 5/8" .087 .063Hook Angle = 7˚
22
800 / 334-4107
TK806 Avanti Thin Kerf Ultra Fine Crosscut Blade
• Fine finish cut-off blade
• Freud's TK400 series of thin kerf saw blades offertrim carpenters and serious DIYers all the qualitythat fine cabinetmakers have come to expectfrom the Freud Industrial series of blades.The high tooth count and alternate topbevel grind of these blades deliverexcellent quality crosscuts for interiorand exterior trim work
• Thick micrograin carbide tips
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Tri-metal brazing for impact-resistant tips
• Covered by Freud's LimitedLifetime Warranty
10"
60T
254mm
HiAT
FINIS
HING SAW B
LADE
Premium Thin Kerf Woodworking Saw Blade
5/8"
Arbor
MAX. RPM: 7
,00
0MADE
Fair RIP WOOD
CROSSCUT WOOD
CHIPBOARD
PLYWOOD
LAMINATE
NON-FERROUS
Not R
Copyright o
f Freud Americ
a, Inc.
WARNING: Always wear e
ye protection m
Do not use blade if
dull or if
any tips
warnings & instru
ctions contained in
ITEM #
TK406
TK400 Avanti Finishing Blades
• Freud’s thin kerf TK806L is speciallydesigned to cut laminate flooring (Pergo®,Armstrong®, Swiftlock®) and double-sided laminates and melaminescleanly
• Triple Chip Grind (TCG) ToothDesign for clean, chip free andlong life cuts in abrasive manmade materials
• Thick micrograin carbide tips
• Thin Kerf uses less power
• Kickback reducing design
• Tri-metal brazing for impact-resistant tips
• Laser-cut blade bodies andexpansion slots
• Covered by Freud's Limited LifetimeWarranty
10"
80T
254mm
TCG
MELAMINE/LAMINATE SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
5/8"
Arbor
MAX. RPM: 7
,00
0
MADE
Fair
RIP WOOD
CROSSCUT WOOD
CHIPBOARD
PLYWOOD
LAMINATE / MELAMINE / M
DF
LAMINATE FLOORING
NON-FERROUS
Not R
Copyright o
f Fre
ud Americ
a, Inc.
WARNING: Always wear e
ye protection m
Do not use blade if
dull or if
any tips a
warnings & instru
ctions contained in
t
ITEM #
TK806L
TK806L Avanti Thin Kerf Laminate,Melamine & LaminateFlooring Blades
23
Item Dia Teeth Arbor Kerf PlateTK406 10" 60 ATB 5/8" .098 .071TK407 12" 80 ATB 1" .110 .071TK408 14" 96 ATB 1" .118 .087Hook Angle = 15˚
Item Dia Teeth Arbor Kerf PlateTK806L 10" 80 TCG 5/8" .098 .071Hook Angle= 5˚
• Use the TK700 series blades for on-the-jobcutting of non-ferrous metal such as copper
pipe, aluminum extrusions, brass plate, etc.
• Micrograin carbide tips thick enoughfor several re-sharpenings
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Tri-metal brazing for impact-resistant tips
• Covered by Freud's LimitedLifetime Warranty
10"
80T
4mm
TCG
NON-FERROUS SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
5/8" ArborMA
X. R
PM: 7,000
TALY
Fair Good Excellent
OODWOODD
Not Recommended
Not Recommended
Not Recommended
Not Recommended
tion meeting CSA Z94.1 or ANSI Z87.1.
s are damaged or missing. Obey all
e machine manual & blade package.
ITEM #TK706
TK700 Avanti Non-Ferrous Metal/ Plastic Cutting Blade
Item Dia Teeth Arbor Hook Angle Kerf PlateTK703 7"-71/4" 56 TCG 5/8" <> -6° .106 .087TK706 10" 80 TCG 5/8" -5° .091 .071
<> = Diamond Arbor
24
800 / 334-4107
• Combination blade for all materials on table saws
• Freud's thin kerf TK900 series saw bladesare the blades to choose for one blade to
does it all. Pro carpenters and serioushobbyist will appreciate the excellent
quality of cut for both ripping andcrosscutting. No more blade changesbetween operations
• Ideal for ripping hard andsoftwoods from 3/8" to 11/2" &crosscutting from 3/4" to 31/2" thick
• Micrograin carbide tips thickenough for several resharpenings
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies and expansion slots
• Covered by Freud's Limited LifetimeWarranty
10"
50T
4mm
COMB
COMBINATION SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
5/8" ArborMA
X. R
PM: 7,000
TALY
Fair Good Excellent
OODWOODD
Not Recommended
3/8" to 1-1/2"
3/4" to 3-1/2"ction meeting CSA Z94.1 or ANSI Z87.1.
s are damaged or missing. Obey all
he machine manual & blade package.
ITEM #TK906
TK900 Avanti Thin Kerf Combination Blades
Item Dia Teeth Arbor Kerf PlateTK901 61/2" 30 ATB 5/8" <> .094 .063TK903 7"-71/4" 30 ATB 5/8" <> .094 .063TK904 8"-81/4" 36 ATB 5/8" <> .094 .063TK905 9" 40 ATB 5/8" .098 .071TK906 10" 50 ATB 5/8" .098 .071Hook Angle = 15˚ <> = Diamond Arbor
• General purpose for cutting natural & manmadematerials
• Freud's TK300 series offers fast, clean cutsfor a variety of applications
• Ideal for ripping hard and softwoodsfrom 1/4" to 11/2" thick & crosscuttingfrom 3/4" to 31/2" thick
• Thick micrograin carbide tips
• Thin kerf blades makes portablesaws feel more powerful
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Covered by Freud's LimitedLifetime Warranty
WARNING: Always wear e
ye protection
Do not use blade if
dull or if
any tips
warnings & instru
ctions contained in
10"
40T
254mm
ATB
GENERAL PURPOSE SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
5/8"
Arbor
MAX. RPM: 7
,00
0
Fair RIP WOOD
CROSSCUT WOOD
CHIPBOARD
PLYWOOD
LAMINATE
NON-FERROUS
Not R
Copyright o
f Freud Americ
a, Inc.
ITEM #
TK306
TK300 Avanti General Purpose Blades
25
Item Dia Teeth Arbor Kerf PlateTK305 9" 40 ATB 5/8" .098 .071TK306 10" 40 ATB 5/8" .098 .071TK307 12" 44 ATB 1" .098 .071Hook Angle = 15˚ <> = Diamond Arbor
• Freud's TK300 small diameter blades leave asmooth finish when ripping and crosscutting 1xstock, decking, fencing and plywood
• The ideal plywood blade!
• MicroGrain carbide tips are thickenough for several resharpenings,yet these blades are affordableenough to be disposable.
• Thin kerf blades makes portablesaws feel more powerful
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Shear Vent Design minimizes binding in extreme cutting applications
• Covered by Freud's Limited LifetimeWarranty
5/8" Arbor
MAX. RPM: 10,000
Do Not
Knock OutTwist
Out
184mm
ATB
FINISHING SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
MADE IN IT
ALY
40T
7 "Obey all w
arnings
& instru
ctions
contained in th
e
machine manual
& blade package.WARNING: Always wear e
ye
protection m
eeting CSA
Z94.1 or ANSI Z
87.1.
ITEM #
TK303
SHEA
RI
NGVENTS
REDUCES BINDI
NG
TK300 Avanti Small DiameterFinishing Blades
Item Dia Teeth Arbor Kerf PlateTK301 61/2" 40 ATB 5/8" <> .094 .063TK303 7"-71/4" 40 ATB 5/8" <> .068 .052TK304 8"-81/4" 40 ATB 5/8" <> .094 .063Hook Angle = 15˚ <> = Diamond Arbor
• This blade is excellent for providing smooth burn-free cuts in pressure treated decking lumber or
other framing materials
• Micrograin carbide tips thick enough forseveral sharpenings and tri-metal brazing forimpact resistance ensure the longest life
• Thick micrograin carbide tips
• Thin kerf puts less stress on your sawand wastes less material
• Kickback reducing design
• Laser-cut blade bodies and expansionslots
• Shear Vent Design minimizes binding inextreme cutting applications
• Covered by Freud's Limited LifetimeWarranty
/8" Arbor
MAX. RPM: 10,000
Do NotKnock Out
TwistOut
ATB
RAMING & DECKING BLADE
m Thin Kerf Woodworking Saw Blade
IN ITALY
SHEARINGVENTS
RED
UCES BINDING
16 T
1/4"
Obey all warnings
& instructions
ontained in the
hine manual &
e package.
WARNING: Always wear eye
protection meeting CSA
Z94.1 or ANSI Z87.1.
ITEM #TK103
TK103 Avanti Thin Kerf Decking and Framing Blade
Item Dia Teeth Arbor Kerf PlateTK103 7"-71/4" 16 ATB 5/8" <> .068 .052Hook Angle = 15˚ <> = Diamond Arbor
also available:TK103-B 7-1/4 INCH DECKING AND FRAMING BLADE - 20 PACK
• For ripping and fast crosscutting
• The Freud TK200 series of blades is the topchoice of professional framing carpenters and
serious woodworkers. Ideal for fast rippingand crosscutting of 2x stock, these are the
blades to pick for heavy daily use
• Micrograin carbide tips thick enough forseveral sharpenings and tri-metalbrazing for impact resistance ensurelong life
• Thin kerf makes portable saws feelmore powerful
• Kickback reducing design
• Laser-cut blade bodies and expansion slots
• Covered by Freud's Limited LifetimeWarranty
ng CSA Z94.1 or ANSI Z87.1.
aged or missing. Obey all
manual & blade package.
0"
24TATB
FRAMING/RIPPING SAW BLADE
emium Thin Kerf Woodworking Saw Blade
5/8" ArborMA
X. R
PM: 7,000
Good Excellent
D
Not Recommended
ITEM #TK206
TK200 Avanti Framing/Ripping Blades
Item Dia Teeth Arbor Kerf PlateTK201 61/2" 24 ATB 5/8" <> .094 .063TK203 7"-71/4" 24 ATB 5/8" <> .068 .052TK204 8"-81/4" 24 ATB 5/8" <> .094 .063TK205 9" 24 ATB 5/8" .098 .071TK206 10" 24 ATB 5/8" .098 .071Hook Angle = 15˚ <> = Diamond Arbor26
800 / 334-4107
• The TK500 series is the secret weapon of theremodeling contractor and the best friend ofthe home improvement enthusiast. Theseblades feature special micrograin carbideand tri-metal brazing that make themideal for cutting through old walls andfloors where an occasional nail mightbe encountered
• Thick micrograin carbide tips
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Negative hook angle teeth offerextreme durability in nail embeddedwood
• Covered by Freud's Limited LifetimeWarranty
5/8" Arbor
MAX. RPM: 10,000
Do Not
Knock OutTwist
Out
184mm
FLAT
REMODELING SAW BL
Premium Thin Kerf Woodworking
14T
71/4"
ITEM #
TK503
WARNING: Always wear e
ye protection m
eeting CSA
Do not use blade if
dull or if
any tips are damaged
warnings & instru
ctions contained in
the m
achine
MADE IN IT
ALY
TK500 Avanti Thin Kerf Remodeling Blades
Item Dia Teeth Arbor Kerf PlateTK501 61/2" 12 ATB 5/8" <> .094 .063TK503 7"-71/4" 14 ATB 5/8" <> .094 .063TK504 8"-81/4" 18 ATB 5/8" <> .094 .063Hook Angle= -15˚ <> = Diamond Arbor
• This carbide tipped trim blade is the perfectreplacement blade for Porter Cable®, Makita®
or similar trim saws
• Thick micrograin carbide tips
• Thin Kerf uses less power
• Kickback reducing design
• Laser-cut blade bodies andexpansion slots
• Tri-metal brazing for impact-resistant tips
• Covered by Freud's LimitedLifetime Warranty 20mm Arbor
MAX. RPM:14
,000
THIN K
ERF TRIM SAW BLADE
Premium Thin Kerf Woodworking Saw Blade
MADE IN IT
ALFair
Go
Not Recomm
RIP WOOD
CROSSCUT WOOD
CHIPBOARD
PLYWOOD
LAMINATE
NON-FERROUS
Copyright o
f
Freud America, In
c.
36TFLAT
111mm43/8"
WARNING: A
lways wear eye p
Z94.1 or ANSI Z
87.1. Do not u
se
are damaged or missing
instructio
ns conta
manual &
ITEM #
TK001
TK001 Avanti Thin Kerf Trim SawBlade
27
Item Dia Teeth Arbor Kerf PlateTK001 43/8" 36 FLAT 20mm* .067 .051Hook Angle= 5˚*Includes bushing to convert to 3/8" arbor
• Trim saw blade for DeWalt® and other trim sawsextends run time
• Replace the cheap steel blade that came withyour trim saw with a premium quality Freud
blade and experience better cuts thanthought possible
• Inexpensive enough to be disposablebut with micrograin carbide tips thickenough for several re-sharpenings
• Thick micrograin carbide tips
• Ideal job site blade
• Super Thin Kerf uses less power
• Kickback reducing design
• Perma-SHIELD® coating
• Covered by Freud's Limited LifetimeWarranty
ATB
20T
"
MADE IN ITALY
ITEM No. TK006
THIN KERF
TRIM SAW BLADE
1/2"Arbor
Max RPM:12,000
WARNING:
Do not use
blade if dull if any tips
damaged ssing.
WARNING:
Obey all warnings &
instructions contained in
the machine manual &
blade package.
SHEARINGVENTS
RED
UCES BINDING
TK002, 003, 004 Avanti Thin Kerf Cordless Trim Saw Blades
Item Dia Teeth Arbor Kerf PlateTK002 53/8" 16 ATB 10mm .059 .039TK003 53/8" 24 ATB 10mm .067 .051TK004 53/8" 30 ATB 10mm .059 .039Hook Angle = 15 ˚
• Trim saw blades for extending run time on PorterCable® & Saw Boss® trim saws
• Replace the cheap steel blade that came withyour trim saw with a premium quality Freud
blade and experience better cuts thanthought possible
• Inexpensive enough to be disposablebut with micrograin carbide tips thickenough for several re-sharpenings
• Ideal job site blade super Thin Kerfuses less power
• Kickback reducing design
• Tri-metal brazing for impact-resistanttips
• Covered by Freud's Limited LifetimeWarranty
ATB
20T
"
MADE IN ITALY
ITEM No. TK006
THIN KERF
TRIM SAW BLADE
1/2"Arbor
Max RPM:12,000
WARNING:
Do not use
blade if dull if any tips
damaged ssing.
WARNING:
Obey all warnings &
instructions contained in
the machine manual &
blade package.
SHEARINGVENTS
RED
UCES BINDING
TK006, TK007 Avanti Thin Kerf Trim Saw Blades
800 / 334-4107
Item Dia Teeth Arbor Kerf PlateTK006 6" 20 ATB 1/2" .067 .051TK007 6" 40 ATB 1/2" .067 .051Hook Angle = 15 ˚
28
Diablo® Saw Blades
Teethntess FramingCons t ru c c ion/Carp in te ro
Charpen te r ieMAX RPM 10,000 WARNING:
AR EYE PROTECTION
!
TENCIA :e s iempre los ojos
:urs un apparei l
des yeux
5/8" Arbor
Do NotKnock Out
Twistt
®
Diab
loConstruction Series
Specially designed to meet the needs of the
construction and remodeling market, Diablo Saw
Blades have a thin kerf, making them ideal for
portable and low powered saws on the jobsite. The
Perma-SHIELD® Hi-Performance Coating keeps
Diablo blades free from gumming and corrosion, and
laser-cut stabilizer vents reduce vibration and heat
buildup for more precise cuts and longer cutting life.
• The top choice for contractors who want a smooth finishwhen ripping
• Ideal for ripping oak, pine, pressure treatedlumber and plywood
• Laser-cut stabilizer vents for reducedvibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharp cutsand long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited LifetimeWarranty
10 "24 Teeth
254mm
DientesDents
RippingAser rado a l h i lo
Sc iage en longTable Saw
Table de S c iage
S ie r ra de mesa
MAX RPM 7000
R O T A T I O N R O T A C I Ó NR O
T A T I O
N
D1024X
5/8" ArborARNING:PROTECTION
e los ojosparei l
ITALY
XXXXXX-XXXXXX
• Diablo framing blades provide exceptional long life inripping and crosscutting applications
• Diablo blades require less power from thesaw, and cause less user fatigue, and
ultimately extend the life of the saw
• Laser-cut stabilizer vents forreduced vibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharpcuts and long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf designgives fast, clean cuts
• Covered by Freud's LimitedLifetime Warranty
7 1/4" 24 Teeth
184mm
DientesDents Framing
Cons t ru c c ion/Carp in te ro
Charpen te r ie
ROTATIO
N
MAX RPM 10,000 WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los ojos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
D0724A
5/8" Arbor
ITALY
XXXXXX-XXXXXX
Do NotKnock Out
TwistOut
®
30
800 / 334-4107
Diablo Framing Blades
Diablo Ripping Blade
Item Dia Teeth Arbor Kerf PlateD0624X* 61/2" 24 ATB 5/8"<> .059 .040D0724X** 71/4" 24 ATB 5/8"<> .059 .040D0824X 8"-81/4" 24 ATB 5/8"<> .094 .063Hook Angle = 15˚ <> = Diamond Arbor
*Available in bulk as D0624A**Available in bulk as D0724A, also available in a worm drive version
with the diamond knockout removed as D0724W
Item Dia Teeth Arbor Kerf PlateD1024X 10" 24 ATB 5/8" .098 .071Hook Angle = 15˚
• The best choice for your miter saw, this bladeleaves a smooth cut in a variety ofapplications
• Ideal for cutting oak, pine, plywood,pressure treated lumber and beams
• Durable MicroGrain Titanium Carbideteeth for razor-sharp cuts and longlife
• Perma-SHIELD® permanent coatingprevents gumming and corrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited LifetimeWarranty
Diablo General PurposeBlades
10" 40
Teeth
254mm
Diente
s
Dents
General Purp
Para uso genera l
Tous usages
Miter/Tab
Ing le tes/Tab le
Sc ie à ong le
D1040A
5/8" Arbor
Readall warnings inside the package before using blade.
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
ITA
LY
XXXXXX-XXXXXX
Item Dia Teeth Arbor Kerf PlateD1040X** 10" 40 ATB 5/8" .098 .071D1044S* 10" 44 ATB 5/8" .087 .063D1244X 12" 44 ATB 1" .098 .071Hook Angle = 15˚*Hook Angle = 7˚ Designed for sliding miter saws and radial arm saws.**Available in bulk as D1040A. 31
Diablo Combination Blade• The best choice for a table saw when one blade is needed
for ripping and crosscutting
• MicroGrain carbide tips are thick enough forseveral resharpenings, yet these blades areaffordable enough to be disposable
• Laser-cut stabilizer vents for reducedvibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharp cutsand long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited Lifetime Warranty 10
" 50Teeth
254mm
Diente
s
Dents
Combination
Combinada
Combina i son
Miter/Tab
Ing le tes/Tab led
Sc ie à ong le t s
M
D1050X
5/8" Arbor
Readall warnings inside the package before using blade.
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
ITA
LY
XXXXXX-XXXXXX
Item Dia Teeth Arbor Kerf PlateD1050X 10" 50 ATB 5/8" .098 .071Hook Angle = 15˚
• The ideal choice for trim carpenters, Diablo Fine Finish Bladesleave a smooth surface that requires little to no sanding
• Ideal for crosscutting oak, pine, melamine,plywood and moulding
• Laser-cut stabilizer vents for reducedvibration and precise cuts
• Durable MicroGrain Titanium Carbideteeth for razor-sharp cuts and long life
• Perma-SHIELD® permanent coatingprevents gumming and corrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's LimitedLifetime Warranty
0 "60 Teeth
254mm
DientesDents
Fine Finish
Acabado Fino
Fin i t i on FineMiter/Table Saw
Ingle tes/Tab le de S c iage
Sc ie à ong le t s /S ie r ra de mesa
MAX RPM 7000
R O T A T I O N R O T A C I Ó NR O
T A T I O
N
D1060X
5/8" ArborON
ITALY
XXXXXX-XXXXXX
• These blades leave a smooth finish when ripping andcrosscutting 1x stock, decking, fencing and plywood
• The ideal plywood blade!
• MicroGrain carbide tips are thick enoughfor several resharpenings, yet these blades
are affordable enough to be disposable.
• Laser-cut stabilizer vents for reducedvibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharp cutsand long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited LifetimeWarranty
5/8" Arbor
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
N
MAX RPM 10,000
7 1/4" 40 Teeth
184mm
DientesDents FinishAcabado
Fin i
®
D0740A
Do NotKnock Out
TwistOut
32
800 / 334-4107
Diablo Finish Blades
Diablo Fine Finish Blades
Item Dia Teeth Arbor Kerf PlateD0740X 71/4" 40 ATB 5/8" <> .059 .040D0840X 8"-81/4" 40 ATB 5/8" <> .094 .063Hook Angle = 15˚ <> = Diamond Arbor*Available in bulk as D0740A.
Item Dia Teeth Arbor Kerf PlateD0860S* 81/2" 60 ATB 5/8" .087 .063D1060S* 10" 60 ATB 5/8" .087 .063D1060X 10" 60 ATB 5/8" .098 .071D1280X* 12" 80 ATB 1" .118 .087D1484X 14" 84 ATB 1" .118 .087Hook Angle = 15˚*Hook Angle = 7˚ Designed for sliding miter saws and radial arm saws.
• The Diablo D1080L is specially designed to cutlaminate flooring (Pergo®, Armstrong®,Swiftlock®) and double-sided laminates andmelamines cleanly
• Triple Chip Grind (TCG) Tooth Designfor clean, chip free and long life cutsin abrasive
• Laser-cut stabilizer vents forreduced vibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharp cutsand long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited LifetimeWarranty
Readall warnings inside the package before using blade.
TRIPL
E CHIP
GRIND(TC
G)
10" 80
Teeth
Laminate/Melami
Laminado / Me lamina
Panneau Lame l lé / Mé l am
Miter/Tabl
Ing le tes / S ie r ra d
Sc ie à ong le t s /
5/8" Arbor
254mm
Diente
s
Dents
MAX
D1080L
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
ITA
LY
XXXXXX-XXXXXX
Diablo Melamine/Laminate/Laminate Flooring Blade
Item Dia Teeth Arbor Kerf PlateD1080L 10" 80 TCG 5/8" .098 .071Hook Angle = 5˚
• The Diablo D1080X offers the quality that finecabinetmakers expect from Freud, yet this blade isdesigned for the rough world of professionalconstruction
• This blade leaves a smooth, velvety finishthat requires little to no sanding
• Ideal for crosscutting oak, pine,melamine, veneer plywood anddelicate moulding
• Laser-cut stabilizer vents forreduced vibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharp cutsand long life
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design gives fast,clean cuts
• Covered by Freud's Limited LifetimeWarranty
MAX RP
10" 80
Teeth
254mm
Diente
s
Dents
Ultra Finish
Acabado U l t ra f ino
Fin i t i on U l t ra
Miter/Table S
Ing le tes/Tab le de S c ia
Sc ie à ong le t s /S ie r ra
D1080X
5/8" Arbor
Readall warnings inside the package before using blade.
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
ITA
LY
XXXXXX-XXXXXX
Diablo Ultra Finish Blade
Item Dia Teeth Hook Angle Arbor Kerf PlateD1080X 10" 80 ATB 15° 5/8" .098 .071D1296N 12" 96 TCG -5° 1" .091 .071 33
• Use the Diablo series blades for on-the-job cutting ofnonferrous metal such as copper pipe, aluminum
extrusions, brass plate, and Plastics.
• Laser-cut stabilizer vents for reducedvibration and precise cuts
• Durable MicroGrain Titanium Carbideteeth for razor-sharp cuts and longlife
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's LimitedLifetime Warranty
0 " 80 Teeth Non-Ferrous /Plastic
Mater ia l p lá s t i co / no fe r roso
Mé t aux non fe r reux / P las t i que
Miter / Table Saw
Ingle tes / S ie r ra de mesa
Sc ie à ong le t s / Tab le de s c iage
DientesDents
MAX RPM 7000
R O T A T I O N R O T A C I Ó NR O
T A T I O
N
D1080N
5/8" ArborION
s
ITALY
XXXXXX-XXXXXX
Diablo Non-Ferrous/Plastic Blades
• Freud’s New Steel Demon® blades efficientlycuts through ferrous metals quickly and
accurately leaving clean, burr free cuts
• Ideal for cutting steel studs, steel pipe,and steel sheet–for most mild steels
under 1/4 inch, (D0748F–for most mildsteels under 1/8 inch)
• Laser-cut stabilizer vents forreduced vibration and precise cuts
• Durable triple chip metal cuttingtooth design maximizes cutting life& speed producing burr-free cuts
• Perma-SHIELD® permanentcoating prevents gumming andcorrosion
• Laser-cut thin kerf design givesfast, clean cuts
• Covered by Freud's Limited LifetimeWarranty
14"
72 Teeth
350mm
DientesDents
D1472 F
1" Arbor
M
AX
RP
M1
80
0
ROTATIO
NRO
TAC
IÓN
RO
TAT
ION
Bef
FOR FERROUS METALS*:
TUBING*
ALL THREAD TM**
S
ANGLE IRON*
EMT CONDUIT
CHANNEL*
BLACK IRON PIPE
TRIPLE CHIP
GRIND(TCG)
Wall Thickness.**Mild Steel Only - 1" Max. Diameter.
Diablo Steel Demon® Ferrous Metal Blades
Item Dia Teeth Arbor Kerf PlateD0748F 7" 48 TCG 5/8"<> .103 .090D1260F* 12" 60 TCG 1" .114 .098D1472F* 14" 72 TCG 1" .114 .098Hook Angle = -2˚ <> = Diamond Arbor*Use only on dedicated low RPM metal cutting saws.
34
800 / 334-4107
Item Dia Teeth Hook Angle Arbor Kerf PlateD0756N 71/4" 56 TCG -6° 5/8"<> .106 .087D1080N 10" 80 TCG -5° 5/8" .091 .071D1296N 12" 96 TCG -5° 1" .091 .071
<> = Diamond Arbor
• The Diablo Beam Saw Blades are designed for largecapacity beam, post and timber cutting
101/4" BIGFOOT® Blade:• Cuts 4x headers and fence posts, 2x
sandwiched headers, exposed beams fordecks and porches, and 7 sheets of 1/2"plywood with one pass
• Cuts up to 37/8" at 90° and 23/4"at 45°
16 5/16" Beam Saw Blade:• Ideal for timber framing such as
laminated Veneer Lumber(LVL), Glued Timber (Glulams),Paralams®
• Cuts up to 61/4" at 90° and43/16" at 45°
• Durable MicroGrain TitaniumCarbide teeth for razor-sharpcuts and long life
• Perma-SHIELD® permanent Non-Stick coating prevents gummingand corrosion
MAX
Arbor (1"/2
5.4mm)
D1632X
Read all warnings inside the package before using blade.
32Teeth
Diente
s
Dents
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los o jos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
414mm
General Purpose
Para uso genera l
Tous u sages
16 "5/16
Beam Saw
Scie pour Pou t res
Ho ja para s ie r ra g
Diablo Beam Saw Blades
• Use the thin kerf Diablo Trim Saw Blades for high qualitycuts and long life
• Super thin kerf design requires less power,thus extending the battery life of cordlesssaws and motor life of corded saws
• Perma-SHIELD® permanent coatingprevents gumming and corrosion
• Laser-cut stabilizer vents forreduced vibration and precise cuts
• Durable MicroGrain TitaniumCarbide teeth for razor-sharpcuts and long life
• Kickback reducing design
• Covered by Freud's LimitedLifetime Warranty
43/8 " 36
Teeth
111mm
Diente
s
Dents
Finish
Acabado
Fin i
MAX R
WARNING:
WEAR EYE PROTECTION
!
ADVERTENCIA :
Proté jase s iempre los ojos
ATTENTION:
Por tez toujours un apparei l
de protect ion des yeux
20mm Arbor
D0436X
Readall w
arningsinside
the package before using blade.
ON
Diablo Trim Saw Blades
Item Dia Teeth Hook Angle Arbor Kerf PlateD0436X** 43/8" 36 ATB 5° 20mm .049 .039D0516X 53/8" 16 ATB 18° 10mm .049 .039D0524X 53/8" 24 ATB 18° 10mm .049 .039D0536X 53/8" 36 ATB 2° 10mm .049 .039D0620X 6" 20 ATB 18° 1/2" .049 .039D0624X* 61/2" 24 ATB 18° 5/8" .059 .039D0640X 6" 40 ATB 18° 1/2" .049 .039*Available in bulk as D0624A**Includes bushing to convert to 3/8" arbor
Beam Saw Blades:Item Dia Teeth Hook Angle Arbor Kerf PlateD1632X 165/16" 32 ATB 22° 1"/25.4mm .114 .079D1660X 165/16" 60 ATB 22° 1"/25.4mm .114 .079
BIG FOOT® Beam Saw Blade:Item Dia Teeth Hook Angle Arbor Kerf PlateD1040W 101/4" 40 ATB 18° 5/8"<> .063 .039<> = Diamond Arbor
40TeethDientesDents
MAX RPM 7000
General PurposePara uso genera lTous usages
10" Worm Drive SawIngle tes/Tab le de S c iageSc ie à ong le t s /S ie r ra de mesa
R O T A T I ON
RO
TAC
I ÓN
RO
TA
TI O
ND1040W
5/8" Arbor
Readall w
arningsinside
thepackage
beforeusing
blade. WARNING:
WEAR EYE PROTECTION!
ADVERTENCIA :Proté jase s iempre los ojos
ATTENTION:Por tez toujours un apparei lde protect ion des yeux
Do NotKnock Out
TwistOut
10 "1/4254mm
35
NEW LASERCUT THIN
KERF BLADE
(BIGFOOT® is a registered trademark of BIG FOOT TOOLS INC)