ltv-305x product data sheet photocoupler · l tv -30 5 x s eries p art no.: ltv -30 5 x series bnc...
TRANSCRIPT
LITE-ON DCC
RELEASE
LITE-ON Technology Corp. / OptoelectronicsNo.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660http://www.liteon.com/opto
PhotocouplerProduct Data SheetLTV-305X Spec No.: DS70-2014-0079Effective Date: 07/15/2016
Revision: B
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
1/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
1. DESCRIPTION
1.1 Features
Isolation voltage between input and output Viso : 3,750Vrms
4pin MFP non zero-cross optoisolators triac driver output
High repetitive peak off-state voltage VDRM : Min. 600V
High critical rate of rise of off-state voltage ( dV/dt : MIN. 1000V / s )
Mini-flat package :
2.0mm profile : LTV-3050, LTV-3051, LTV-3052, LTV-3053
Safety approval
UL 1577
cUL CA5A
VDE DIN EN60747-5-5 (VDE 0884-5)
RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
ESD pass HBM 8000V / MM2000V
MSL class1
1.2 Applications
Motor Controls Solid state relays For triggering high power thyristor and triac Household use equipment
2/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
2. PACKAGE DIMENSIONS
2.1 LTV-305X series
Notes :
1. 1-digit Year date code, 2-digit work week.
2. Factory identification mark shall be marked (X: China -TJ)
3. IFT Rank
4. “4”or”V” for VDE option.
*All dimensions in millimeters.
3/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
3. TAPING DIMENSIONS
3.1 LTV-305X-TP 3.2 LTV-305X
3.3 Quantities Per Reel
Description Symbol Dimension in mm (inch)
Tape wide W 12±0.3 (0.472)
Pitch of sprocket holes P0 4±0.1 (0.157)
Distance of compartment F 5.5±0.1 (0.217)
P2 2±0.1 (0.079)
Distance of compartment to
compartment P1 8±0.1 (0.315)
Package Type LTV-305X series
Quantities (pcs) 3000
4/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the
secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Rating Unit
Input
Forward Current IF 50 mA
Reverse Voltage VR 6 V
Power Dissipation PD 70 mW
Junction Temperature TJ 125 oC
Output
Off-State Output Terminal Voltage VDRM 600 V
Peak Repetitive Surge Current ( PW=1ms, 120pps ) VTSM 1 A
Collector Power Dissipation PC 300 mW
Junction Temperature TJ 125 oC
Total Power Dissipation Ptot 330 mW
*1. Isolation Voltage Viso 3750 Vrms
Ambient Operating Temperature Range TA -55 ~ +115 oC
Storage Temperature Tstg -55 ~ +150 oC
*2. Soldering Temperature TL 260 oC
5/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C
Parameter Symbol Min. Typ. Max. Unit Test Condition
Input
Forward Voltage VF — 1.15 1.5 V IF=20mA
Reverse Current IR — — 10 A VR=6V
Output
*1 Peak Blocking Current,
Either Direction IDRM — 10 100 nA VDRM=600V
Peak On-State Voltage, Either
Direction VTM — 1.7 3 V ITM=100 mA Peak
*2 Critical Rate of Rise of Off-State
Voltage dv/dt 1000 — — V/s
COUPLED
*3 Led Trigger
Current, Current
Required to Latch
Output, Either
Direction
LTV-3050
IFT
— — 30
mA Main Terminal
Voltage = 3V
LTV-3051 — — 15
LTV-3052 — — 10
LTV-3053 — — 5
Holding Current, Either Direction IH — 250 — A
*1 Test voltage must be applied within dv/dt rating.
*2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.
*3 All devices are guaranteed to trigger at an IF value less than or equal to max IFT.
6/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE)
Fig.1 Forw ard C urrent vs. F ig.2 O n-state C urrent vs. Am bient
Tem perature
F ig.4 Forw ard C urrent vs. Forw ard
F
0
-40
60 C
40 C
20 C
Am bient Tem perature
F ig.6 H old ing C urrent vs.
Tem perature
F ig.5 O n-state Voltage vs. Am bient
F ig.3 M in im um Trigger C urrent
vs. Am bient Tem perature
Fo
rwa
rd c
urr
en
t I
(m
A)
I
, o
n-s
tate
cu
rre
nt
(A)
Fo
rwa
rd c
urr
en
t IF
(m
A)
On
-sta
te v
olt
ag
e V
T (
V)
Min
imu
m t
rig
ge
r c
urr
en
t IF
T (
mA
)
Ho
ldin
g c
urr
en
t IH
(m
A)
Am b ient tem perature Ta ( C) Am b ient Tem perature Ta ( C)
Forward vo ltage VF (V)Am b ient tem perature ( C)
Am b ient tem perature Ta ( C) Am b ient tem perature Ta ( C)
0 20 40 60 80 100
60
0
0.4
1
2.0
0.01
20 40 60 80 10020
1.0
100
20
0
10
o
o
o
Am bient Tem perature
o o
Voltage
IT= 100m A
3.0
10
100
8
6
4
2
50
40
30
20
10
100
1
o
80 Co
100 C
0.05
0.10
TM
VP= 6V
R L= 100
2.6
2.2
1.4
1.8
40 8060o
VP= 6V
0.8 1.2 1.6
o
806040
o
0.1
120-20 -40 -20 0 804020 60 100 120
8/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
6. TEMPERATURE PROFILE OF SOLDERING
6.1 IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three
times.
Profile item Conditions
Preheat
- Temperature Min (TSmin)
- Temperature Max (TSmax)
- Time (min to max) (ts)
150˚C
200˚C
90±30 sec
Soldering zone
- Temperature (TL)
- Time (tL)
217˚C
60 sec
Peak Temperature (TP) 260˚C
Ramp-up rate 3˚C / sec max.
Ramp-down rate 3~6˚C / sec
60 ~ 120 sec
25 C
150 C
200 C
260 C
217 C
60 sec
T im e (sec)
Te
mp
era
ture
(
C)
20 sec
Tsm ax
ts (P reheat)
tL (Soldering)
Tsm in
TL
TP
R am p-dow n
R am p-up
35~70 sec
9/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
6.2 Wave soldering (JEDEC22A111 compliant)
One time soldering is recommended within the condition of temperature.
Temperature: 260+0/-5˚C
Time: 10 sec.
Preheat temperature:25 to 140˚C
Preheat time: 30 to 80 sec.
6.3 Hand soldering by soldering iron
Allow single lead soldering in every single process. One time soldering is recommended.
Temperature: 380+0/-5˚C
Time: 3 sec max.
10/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit: mm
6.25
2.54
1.5
0.8
11/11
Photocoupler
LTV-305X series
Part No.: LTV-305X series
BNC-OD-FC002/A4
Rev. : -
8. NAMING RULE
9. NOTES
LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes
without further notices.
The products shown in this publication are designed for the general use in electronic applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control
equipment, medical equipment, etc, please contact our sales representatives.
When requiring a device for any ”specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
DEVICE PART NUMBER
Please refer to Electrical Optical
Characteristics Table on Page P5
(1) TAPING TYPE (TP or no suffix)
(2) VDE option
Example : LTV3051TP1-V
LTV305(X)(1)-V
LTV-305(X)(1)
DEVICE PART NUMBER
Please refer to Electrical Optical
Characteristics Table on Page P5
(1) TAPING TYPE (TP or no suffix)
Example : LTV-3051-TP1