ls1 project
DESCRIPTION
LS1 Project. Weld in dowel holes to move head over bores. Index and install new dowel hole. Remove seat rings for larger valves. Port cylinder head. Cut manifold in half for offset of heads. Flow head and manifold. With manifold cut in half, that makes porting easier. A second view. - PowerPoint PPT PresentationTRANSCRIPT
LS1 Project
Weld in dowel holes to move head over bores
Index and install new dowel hole.
Remove seat rings for larger valves
Port cylinder head
Cut manifold in half for offset of heads
Flow head and manifold
With manifold cut in half, that makes porting easier.
A second view
Weld manifold together again
A better look at the offset
The bolt holes need to be offset also.
Finished bolt holes
Finished chambers
Rectangular port option
Springs and rocker pads
• For further information;• Call 845 473 1136• E-mail [email protected]• Thanks for your time, have a great
day, John