lri validation suite meeting november 1st, 2011. agenda review of lis test plan template clia...
TRANSCRIPT
LRI Validation Suite Meeting
November 1st, 2011
Agenda• Review of LIS Test Plan Template• CLIA Testing• EHR testing (Juror Document)—Inspection
Testing• Action Item List• Review policy proposal for validating receiver
processing of terminology• Planning
EHR Test Harness Test Flow—Testing the EHR (Model 1)
EHRLab Message
ACK
Validation
LRI EHR Test HarnessInspection Testing can be performed by:
1. On-site inspection2. Over a webex like technology3. Screen-scraper or screen-capture (include clock)4. Printed Reports
Inspection Testing Techniques1. EHR display screens2. Database access3. Configuration files
Communication
Automated TestingAcknowledgement MessageLimited Utility
LRI Test Message
Validation Report
Test Data
Test Case
Use Case
JurorDocument
ACK
CLIA Requirements
42 CFR 493.1291(c) The test report must indicate the following:
1. For positive patient identification, either the patient's name and identification number, or a unique patient identifier and identification number
2. The name and address of the laboratory location where the test was performed
3. The test report date4. The test performed5. Specimen source, when appropriate6. The test result and, if applicable, the units of measurement or
interpretation, or both7. Any information regarding the condition and disposition of specimens that
do not meet the laboratory's criteria for acceptability
CLIA Requirements Mapped to Data Elements42 CFR 493.1291(c) The test report must indicate the following:
1. For positive patient identification, either the patient's name and identification number, or a unique patient identifier and identification number– PID-3 : Unique patient identification number – PID-5 : Patient Name
2. The name and address of the laboratory location where the test was performed- OBX-23/24/25: Lab Identification Fields
3. The test report date- OBX-19: Date/Time Analysis
4. The test performed- OBX-3: LOINC codes for Observation Identifier
5. Specimen source, when appropriate– SPM-4: Specimen Type
6. The test result and, if applicable, the units of measurement or interpretation, or both– OBX-5: Observation Value– OBX-6: Units– OBX-7: Reference Range– OBX-8: Abnormal Flag– OBX-11: Observation Result Status
7. Any information regarding the condition and disposition of specimens that do not meet the laboratory's criteria for acceptability– SPM-21: Specimen Reject Reason– SPM-22: Specimen Quality
Required CLIA Report Elements
– PID-3 : Unique patient identification number – PID-5 : Patient Name– OBX-3: LOINC codes for Observation Identifier– OBX-5: Observation Value– OBX-6: Units– OBX-7: Reference Range– OBX-8: Abnormal Flag– OBX-11: Observation Result Status– OBX-19: Date/Time Analysis– OBX-23/24/25: Lab Identification Fields– SPM-4: Specimen Type– SPM-21: Specimen Reject Reason– SPM-22: Specimen Quality
Are all elements required to be displayed on screen (including the components and subcomponents of these fields)?
Format of the EHR Juror Document
• Follow the workflow of the EHR• Grouping of Data– Display patient name, id, and lab results– Additional demographics– Performing Labs Information• Demographics
• What should be displayed on the EHR and what can be assessed via database access– Also take into account CLIA and MU Requirements
Action Item List I• Select message to handle core lab results
– Identify 20 or so common lab results (In progress)– Obtain/Adapt/Create test messages to cover the core set of lab results
(In progress)• Identify/List all pertinent data elements (In progress)
– Create spreadsheet of all data elements with usage of R, RE, and C (rows)
– Columns will identify:• Juror Document (How to assess the element)• Identify the elements required for CLIA testing• Identify static, configurable, or indifference data elements
• Identify/create/verify value sets (In progress)– Create Spreadsheet; convert to NIST XML tool format– Incorporate the value sets in PHINVADS– Develop download mechanisms and transformation of values to
support the NIST tooling format
Action Item List II
• Review LRI implementation Guide and create a list of all conformance requirements (Not Started)– Create matrix based on data elements– Link all conformance requirements to data elements when possible– Create “higher” level list of conformance requirements
• Determine the policy for assessing receiver side terminology (Done: need to write policy statement)– Inspection test requirements and procedure– Automated test requirements and procedure
• Complete development of LIS Test Plan Skeleton• Complete development of EHR Test Plan Skeleton
Action Item List III• Identify and document the test dimensions (Not Started)
– Coverage of Lab Results– Scenarios (e.g., Preliminary, Final, Corrected)– Reporting formats– Negative testing– Minimally and maximally populated
• Contact CLIA and CAP inspectors to get their lab inspection process (Need contacts)
• Determine a process for verifying test cases (Not Started)• Implement process for verifying test cases (Not Started)• Research ELINCS Test Tool (DONE)
– Determine what we can leverage– Process flow, source code, test messages
Action Item List IV• Identify all the public health reportable lab results (Done)• Identify the data elements that differ from the public health IG and the S
& I LRI IG (Not Started)• Determine a policy for validating LRI messages using EHR PH lab results
messages (Not Started)• Develop spreadsheets for managing test cases/data (In progress)
– Adapt tooling to process and incorporate data– Phase 1 nearly complete– Phase 2 will include the multiple dimensions (Data, Profile, Juror)
• Create the HL7 standard message profiles (Starting soon)– MWB (then produce XML message template)– Need to make updates to the message profile based on changes made in
version 2.7 and 2.7.1– Write XSLT to modify XML message profile
Action Item List V
• Identify the CLIA conformance requirements and compare to the requirements in the implementation guide (In progress)– Mark in spreadsheet – (DONE)– Make sure conformance requirements and IG match– Write conformance requirements in IG where necessary to match
CLIA requirements• Prototype tool (In progress)
– Requirements and design (In progress)– Development (In progress)– Incorporate test cases (Not Started)– Testing (Not Started)