lr mov92366 eple05-50 - daikin
TRANSCRIPT
Air-cooled chillers
EWAP110-540MBYApplied systems
NEW
EPLE05-50 OPI 11/10/05 11:11 Page 1
MOV92366_EPLE05-50
Cyan Magenta Yellow Black
ww
w.
da
ik
in
eu
ro
pe
.c
om
9 models are available with cooling capacities ranging from 111kW to541kW. The units are ideal for use in severe weather conditions andover a wide operation range. This major benefit results from theincorporation of an auto adaptive control system with built-infunctions that include:• head pressure control: fan control for low ambient down to -15°C• head pressure setback for high ambient operation: on hot days,
when cooling is most needed. Daikin chillers will stay on line bymodulating the capacity control in function of the high pressure.
Flexibleapplication
Daikin’s unique position as a manufacturer of air conditioning equipment,
compressors and refrigerants has led to its close involvement in
environmental issues. For several years Daikin has had the intention to
become a leader in the provision of environmental friendly products.
This challenge demands the eco design and development of a wide range of products and
an energy management system; which involves energy conservation and reduction of
waste.
50
433940
30
20
10
0
-10
-20-15
-30-20 -10 0 10 20 30
-5 4 16 26
33
ambient temperature°C
***
leaving evaporator water temperature (°C)
Protect the water circuit against freezing by:• or heater tape (standard)• or filling up the system with a glycol solution
50
433940
30
20
10
0
-10
-20-15
-30-20 -10 0 10 20 30
-5 4 16 26
33
Pull-downarea
Continuousoperation
area
* Glycol** Water
• flow switch standard supplied with the unit• water filter with a perforation diameter
of 1mm supplied as standard accessory
Easy installation
Ô
EPLE05-50 OPI 12/10/05 13:13 Page 2
MOV92366_EPLE05-50
Cyan Magenta Yellow Black
Heat exchanger
Electronic control• advanced pco2 control• detailed information on and accurate control of all functional
parameters by easy menu scrolling: schedule timer, floating set point,free cooling, double evaporator pump, manual pump on, date andtime information, daily pump on
• chilled water and brine temperatures down to -10°C on standard unit.(Parameter in the service menu of the DDC controller must be set by the installer)
• changeable digital input/output such as remote on/off, remote cooling/heating, dual setpoint and limit capacity.• self diagnostic and can be set up in several languages.• Lead lag function is standard• standard equipped with night setback and peak load limitation• Remote DDC (EKRUPC) can be installed up to 1,000m from the unit• thanks to the standard DICN, simultaneous operation of up to 4 chillers is allowed.
This function enables a Daikin 2MW chiller plant to be operated via a single controller.
The new large Daikin chillers are fitted with a G-type singlescrew compressor with stepless capacity control.The G-type stepless single screw compressor enablescapacity requirements to be closely matched by modulatingthe sliding valve position according to the chilled watercontrol condition. Main advantages of continuous modulation arebetter part load efficiency and more stable chilled water temperatureswith closer control tolerance. Capacity control is infinitely variable between30% and 100% on single circuit units and between 15% and 100% on dual circuit units.
Single screw compressor NEW
CONDENSER• condenser coils are constructed from specially designed
header distribution pipes, combined with internallygrooved Hi-X tubing and PE coated waffle louvrepressed fins
• all condenser coils are standard anti-corrosion treatedto better withstand the effects of the externalenvironment
• condenser protection grilles are available throughoutthe whole range
BPHE EVAPORATOR• brazed plate heat exchanger made of stainless steel
plate, brazed gas tight with copper• optimised distribution and counterflow arrangement
benefits of R-407C• fitted standard with evaporator heater
EPLE05-50 OPI 11/10/05 11:12 Page 3
MOV92366_EPLE05-50
Cyan Magenta Yellow Black
110 140 160 200 280 340 400 460 540
o o o o o o o o o factory mounted
o o o o o o o o o factory mounted
o o o o o o o o o factory mounted
o o o o (S) o (S) o (S) o (S) o (S) o (S) factory mounted
o (S) o (S) o (S) o (S) o (S) o (S) o (S) o (S) o (S) factory mounted
o o o o o o o o o factory mounted
o o o o o o o o o factory mounted
o o o o o o o o o factory mounted
o o o o o o o o o factory mounted
o o o o o o o o o kit
o o o o o o o o o kit
o o o o o o o o o kit
o o o o o o o o o kit
o o o o o o o o o kit
EWAP-MBY
Availability
To install EKBMSMBA, EKBMSBNA --> EKAC200A needs to be installed on the unito availableo (S) Option required for Swedish National law SNFS 1992:16
Nominal capacity cooling kW
Nominal input cooling kW
EER
Capacity steps %
Water heat exchanger
Refrigerant circuit type
charge kg
control
oil type
oil charge l
Compressor type
No. of circuits/compressors
Air heat exchanger type
air flow rate m3/min
Dimensions H x W x D mm
Machine weight kg
Operation weight kg
Sound power level standard/low noise option dBA
Casing material
colour
Piping connections evaporator water in/outlet
evaporator water drain
relief device outlet
Safety and functional devices
Operation range air side °C
water side °C
Power supply Y1
110 140 160 200 280 340 400 460 540
111 144 164 199 285 349 395 468 541
41.9 51.8 64.3 78.1 108 140 156 189 222
2.65 2.78 2.55 2.55 2.64 2.49 2.53 2.48 2.44
30 ~ 100
Brazed plate heat exchanger, one per circuit
R-407C
27 39 42 58 84 84 128 129 130
Thermostatic expansion valve
FVC68D
5.5 5.5 7.5 7.5 10 10 2 x 7.5 7.5 + 10 2 x 10
Semi-hermetic single screw compressor
1/1 2/2
Cross fin coil / Hi-X tubes and polyethyleen coated waffle louvre fins
960 960 960 1,920 1,920 1,920 2,880 2,880 2,880
2,250 x 2,346 x 2,238 2,250 x 4,280 x 2,238 2,250 x 5,901 x 2,238
1,417 1,571 1,660 2,203 2,583 2,633 4,865 4,988 5,111
1,425 1,584 1,676 2,223 2,61 2,667 4,939 5,069 5,199
91 96 96 97 99 100 101 101 101
Polyester coated galvanised steel plate
Ivory white / Munsell code 5Y7.5/1
Flexible coupling + counterpipe for welding 3"OD Flexible coupling + counterpipe for welding 3" Flexible coupling + counterpipe for welding 5"
Field installation 1/4"G
Compressor: 1"NPT Compressor: 2x1"NPT Compressor: Compressor:
2x(1"NPT) 1x(1"NPT)+1x(2x1"NPT)
Double PED approved high pressure switches/low pressure protection/pressure relief valve on condenser/compressor motor thermal protector/compressor motor overcurrent relay/
discharge temperature controller/freeze up protection/recycling and guard timer/reverse phase protector/flow switch
-15 ~ 43
-10 ~ 26
3~/50Hz/400V
Notes:1. Nominal cooling capacity at Eurovent condtions: evaporator: 12°C/7°C; ambient: 35°C2. Nominal cooling power input at Eurovent condtions: evaporator: 12°C/7°C; ambient: 35°C3. The sound power level is an absolute value indicating the "power" which a sound source generates.
Option Number Option description
OPHR heat recovery
OPIF inverter fans
OPHF high esp fans
Completely combinable optionsop03 dual pressure relief valve
op12 suction stop valve
op52 main isolator switch
op57 a-meter / V-meter
OPLN Low noise operation
OPCG Condenser protection grilles
Available kitsEKCLWS Leaving water controlsensor for DICN
EKAC200A BMS card
EKBMSMBA BMS gateway modbus/j-bus protocol
EKBMSBNA BMS gateway bacnet protocol
EKRUPC Remote user interface
unit size
EPLE
05-5
0 /
250
/ 10
/05
/ La
Mo
vid
aPr
inte
d o
n n
on
-ch
lori
nat
ed p
aper
/ P
rin
ted
in
Bel
giu
m
Daikin products are distributed by:
Zandvoordestraat 300
B-8400 Oostende, Belgium
www.daikineurope.com
“The present leaflet is drawn up by way of information only and doesnot constitute an offer binding upon Daikin Europe N.V.. DaikinEurope N.V. has compiled the content of this leaflet to the best of itsknowledge. No express or implied warranty is given for thecompleteness, accuracy, reliability or fitness for particular purpose ofits content and the products and services presented therein.Specifications are subject to change without prior notice. DaikinEurope N.V. explicitly rejects any liability for any direct or indirectdamage, in the broadest sense, arising from or related to the useand/or interpretation of this leaflet. All content is copyrighted byDaikin Europe N.V.”
Daikin Europe N.V. is approved by LRQA for its QualityManagement System in accordance with the ISO9001standard. ISO9001 pertains to quality assuranceregarding design, development, manufacturing as wellas to services related to the product.
ISO14001 assures an effective environmentalmanagement system in order to help protect humanhealth and the environment from the potential impactof our activities, products and services and to assist inmaintaining and improving the quality of theenvironment.
Daikin units comply with the European regulations thatguarantee the safety of the product.
Daikin Europe NV participates in the EuroventCertification Programme for Air Conditioners (AC),Liquid Chilling Packages (LCP) and Fan Coil Units (FC);the certified data of certified models are listed in theEurovent Directory.
EPLE05-50 OPI 11/10/05 11:12 Page 4
Compressor:
2x(2x1"NPT)
MOV92366_EPLE05-50
Cyan Magenta Black