lp downtown usa r01 -...

58
USA price list effective May 1st 2014 COLLABORATIVE FURNITURE downtown

Upload: trananh

Post on 24-May-2019

213 views

Category:

Documents


0 download

TRANSCRIPT

USAprice listeffective May 1st 2014

COLLABORATIVE FURNITUREdowntown

downtown

1

design : Suzanne Léger and Artopex team

general information

price list

2visual index

56conditions & guarantees

Seating 6Tables 8

Electrical Outlets 10Complementary Products 12

Colors 15

Typical Layouts 17

Seating 18Tables 31

Mediacom Tables 43Privacy Screens 46

Mobile Panels 48 Storage 51

Occasional Tables 52Complementary Products 53

2

OTTOMANS 18''H - 18 RECTANGULAR SEATING WITH BACKREST - 18

OT STO STFOT STO STFOT STO STFOT STO STFOT

RECTANGULAR SEATING WITH HALF BACKREST - 19

SHRO SHRF SHLO SHLFSHRO SHRF SHLO SHLF

RECTANGULAR SEATING WITH ALTERNATING HALF BACKREST - 20

DSRO DSRF DSLO DSLF

SQUARE SEATING WITH CORNER BACKREST - 21

CRO CRF

RECTANGULAR SEATING WITH CORNER BACKREST - 22

CRO CRF CLO CLF

CRO CRF CLO CLFCRO CRF CLO CLF

RECTANGULAR SEATING WITH ALTERNATING CORNER BACKREST - 24

DCRO DCRF DCLO DCLF

TRAPEZOID OTTOMANS - 25 ROUND OTTOMANS - 26 ARMREST - 26

OZ SZ OC ARMOCOC

OCHOCH

STOOLS - 27

OCS OTS SSF

OTTOMANS 30''H & 42''H - 28

OT OTOT OTOTOT

UPHOLSTERED TABLES - 29

TUS TUC TUCH TUATUS TUC TUCHTUS TUCTUSTUSTUS

UPHOLSTERED TABLES WITH 2" LAMINATE TOP - 30

TLS TLC TLCH TLATLS TLC TLCHTLS TLCTLSTLSTLS

3

17.5''H. OCCASIONAL TABLES - 31

TRDR TSDS TMASS TiTRDR TSDS TMASS Ti

Ti

TEDR

24" H. LOUNGE TABLES - 32

TRD TSDS TSRSTRD TSDS TSRSTRD TSDS TSRSTRD TSDS TSRS

29" H. ROUND TABLES - 33

TRDR TRLERTRDR TRLERTRDR TRLERTRDR TRLER

29" H. SQUARE TABLES - 34

TSDS TSPS TSPS TSRSTSDS TSPS TSPS TSRSTSDS TSPS TSPS TSRSTSDS TSPS TSRS

TSPS

29''H. COLLABORATIVE WORK TABLES - 36

DFi DS DFD DR DFV DRDFi DS DFD DR DFV DR

DFi RS DFD TS DFV TSDFi RS DFD TS DFV TS

DMi RS DMD TS DMV TSDMi RS DMD TS DMV TS

40''H. TABLES - 39

TRDR TSDSTRDR TSDSTRDR TSDS

BISTRO TABLES - 40 BISTRO TABLES WITH MULTI-OUTLET - 41

Ti Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti MTi Ti Ti M Ti M

BISTRO TABLES WITH BUILT-IN STORAGE - 42 BISTRO TABLES WITH BUILT-IN STORAGE & MULTI-OUTLET - 42

TiBi TiBi TiBi M TiBi MTiBi TiBi TiBi M TiBi MTiBi TiBi TiBi M TiBi M

4

MEDIACOM BISTRO TABLES - 43 FINISHING PROFILE - 43

TPAi TPAi TPAFPTPAi TPAiTPAi TPAiTPAi TPAiTPAi TPAiTPAi TPAiTPAi TPAiTPAi TPAi

MEDIACOM TABLES WITH METAL LEG - 44

TPAi DS TPAD DR TPAV DSTPAi DS TPAD DR TPAV DSTPAi DS TPAD DR TPAV DSTPAi DS TPAD DR TPAV DSTPAi DS TPAD DR TPAV DSTPAi DS TPAD DR TPAV DS

MEDIACOM TABLES WITH ARCHITECTURAL BASE- 45

TPAi RS TPAD TS TPAV TSTPAi RS TPAD TS TPAV TSTPAi RS TPAD TS TPAV TSTPAi RS TPAD TS TPAV TSTPAi RS TPAD TS TPAV TSTPAi RS TPAD TS TPAV TS

PRIVACY SCREENS - 46

PAN PAN FJS PASPAN PAN PASPAN PAN PASPAN PAN PASPAN PAN PAS

PAS

MOBILE PANELS- 48

PMMB PMOB SHE PMDBPMOBL PMDB

PMDBPMDBLPMDBLPMDBL

STORAGE UNITS - 51 OCCASIONAL TABLES - 52

BK BK TAAK TAACBK BK

BKBK

HOOK - 53 CUSHIONS - 53

HKB CUSHCUSHCUSH

EXTRA SHELVES - 54

BKS BKSBKSBKSBKS

HARDWARE - 55

AC-FJD AC-EWF AC-RSTi AC-FJPAC-RSTiAC-RSTi

downtown

5

General Information

downtown

6

18"

42"30"

18H

42H

30H

variable

19"

18"

24"27"

30"

3"

The Downtown Collection offers a casual professional work environment adapted to today's new ways of working and the associated technology. Whether your team meets standing up or sitting down, in large or small groups, for a minute or an hour, Downtown provides an atmosphere of freedom and well-being.

Depending on the context, collaborative work is performed using lounge chairs, task chairs or stools. Tables of various heights (17.5'', 24'', 29'' and 40'') adapted to different types of seating are required. The Downtown Collection offers a wide range of seating and table choices that

The linear seating offers both comfort for a moment of relaxation and ease for working with electronic devices. Seating is available in several sizes, and with many choices of backrests. Electrical outlets facilitate the use of electronic devices over a long period. Adapted to new ways of working, focusing primarily on advanced communication technology, this collection has tables that enable the installation of a monitor in addition to high performance power and communication modules. These tables are available in 3 heights allowing for the design of casual work environments.

environments.

Seating consists of a plywood structure covered in high density

are only 1'' high with adjustable levelers, giving the impression that

wrapped.

18” height (continued)Seating in trapezoid and round shapes are also available at a height of 18''.

of the seat or without backrest. The seat's 60° angle allows for

multi-outlet module is available, see p.7.

18'' height :

Backrest models :

side of the seat

Right AlternatingCorner

Height 30'' H Height 42'' H

Seating is available in 3 seat heights :

Overall seat dimensions :

Stools 30'' H

Dimensions :

Round and half-moon seats are available always without backrest. Refer to the price list for available sizes.

Ottomans 30'' H and 42'' H allow for multi-level “bleacher”

General Information

Seating

General Information

downtown

7

16¾"

4¼"

2"

Seating (continued)

Fabric Choices Seating with backrests can be ordered in 2 fabrics : Fabric 1 = seat; Fabric 2 = backrest. The price for the seat is determined by the highest of the two fabric grades. For the complete selection of fabrics available, refer to the current Artopex seating fabric cards.

Fabric 1 : Seat

Multi-Outlet Module (M7) for SeatingA multi-outlet module is available as an option on rectangular and trapezoid seating (18'' H). Only one multi-outlet module can be installed on a seat.

Four positions are available : front left (FL), front right (FR)left side (SL) or right side (SR) .

- Dimensions of the multi-outlet module : 5'' x 2½''

- Power cord : 9 feet

Multi-outlet on the side

Multi-Outlet Module (M6) for an Upholstered TableAn optional multi-outlet module is available on the upholstered table with or without a 2” top. One module is installed at the center. For rectangular tables 48'' and more, it is possible to add 2 modules (see drawing).

triangular table

Tables with Upholstered Base

same fabric. The table consists of a hardwood structure covered in polyurethane foam and a fabric cover. The table has the same legs as the benches, 1'' high.

Tables are available in various shapes : rectangular, round, half-moon, triangular, and in several dimensions. The triangular table has an angle of 60 degrees for creating curved layouts.

Two models of tables are available : all fabric or fabric with a 2” thick laminate surface. In both cases, the total height of the table is 16¾'' H.

Fabric Fabricwith surface

See page 10 for a detailed description of the multi-outlet module (M6).

Multi-outlet on the side (centered)

Multi-outlet in front (left or right)

M7 multi-outlet module

Cable routing under the benches :

ArmrestAn armrest, sold separately, can be installed between two seats with

seat. A metal bracket attaches the armrest to one of the benches. Once installed, the armrest is the same height as the backrest and leaves a 3” space from the front of the seat.

FLfront left

FRfront right

SLleft side

SRright side

Positions of the multi-outlet module :

Table power outlet

Seating electrical outlet

Seating ganging bracket

Cable fasteners

or

General Information

downtown

8

17½"

30"

25"

41"

30"

41"

17½"

29"

24"

40"

30"

30"

Tables

Bistro Table The “bistro” type table is made of a surface and two full-width gables, all 2'' thick (S2).

Different heights are available :

The bistro table is always rectangular. Narrow modesty panels provide stability and conceal electrical outlets and cables if applicable.

The bistro table is available in a model with shared open storage and adjustable shelves (interior space 12''W x 14.5'' deep). This model is available in heights of 30'' and 41''. Additional shelves are sold separately.

The Downtown Collection offers a wide range of tables in various shapes with 1" or 2" thick surfaces. Tables 1" thick are made of

(codes L1 or S1). Tables 2" thick are made with a lightweight yet very strong inner structure of honeycomb cardboard. It is

Many heights are available :

Low table

"Stool" tableWork table

General description of the surface supports

Round tubular leg with round or square base plateThe tubular leg with base plate is available for tables 17½'', 24'', 29'' and 40'' high. It is a tube 3'' or 4'' in diameter and a base plate

surface.

The tube 4'' in diameter permits the installation of a round multi-outlet module (M2) and the routing of cables inside of the tube

enable the cables to pass to the periphery of the base plate. These

Round or square tubular legs : The tubular legs are available for tables 29'' high. Round legs (3'' diameter) and square legs (2½'' x 2½'') are steel, painted in a choice

levelers. Optional casters (black nylon and 2½''H.) can be added on round legs. Numerous meeting tables are available. Refer to the current Take Off Conference tables price list.

Square, rectangular or triangular architectural base : The architectural base is available for tables 24'' and 29'' high. It is made of laminate panels with vertical woodgrain and 90

or Polar White. Cables can be routed through the base and a removable panel provides convenient access to the interior.

architectural base square

architectural base rectangular

architectural base triangular

* The heights shown correspond to 1'' thick surfaces. When using 2'', add 1'' to the total height of the table.

2 adjustable shelves1 adjustable shelf

Tubular leg with round base plate

Tubular leg with square base plate

Round legs Square legs

General Information

downtown

9

30"-41"

57"-62"-73"

24"-29"-40"

60"-72"48"

50"

60"-72"-84"-96"30"-36"

62"-73"

32" -38"

4"

2"

120o

32"

32"

monitor and management of the most complex cabling. It consists of a surface, a leg, and a technical panel with a metal contour and laminate facades.

The Mediacom table is also available in a “bistro” model, with a 2'' thick, full width leg. This table is always rectangular.

Refer to the following pages for more information.

Surface characteristics :

1'' high pressure laminate (S1) and 2'' high pressure laminate (S2) . Width : 48''. Lengths : 60'' and 72''. Heights : 24'', 29'' and 40'' H.. Shapes : rectangular, D or tapered

Choice of surface support : . Metal leg with round or square base plate . Rectangular or triangular architectural base

The technical panel The secured front panel is used to install a monitor. The rear panel is removable for easy access to cables. A metal frame 3'' wide holds the panels together.

. Width : 50''

. Heights : 57'', 62'', 73'' H.

. Maximum monitor size : 55'' diagonal

Surface characteristics :

. Width : 30'' and 36''

. Lengths : 60'', 72'', 84'' and 96''

. Heights : 30'' and 41'' H.

Gable characteristics :. 2” thick gable

The technical panel The panel is identical to that of a regular Mediacom table with the exception of a few characteristics.

. Width : 32'' - 38''

. Heights : 62'', 73'' H.

. Maximum size of the monitor : 32'' diagonal for a 32'' panel and 40'' diagonal for a 38'' wide panel

Technical panel

Monitor and support(not included)

Monitor and support(not included)

2” surface

2” full width gable

Mediacom Tables Mediacom Tables (Bistro model)

Rectangular surface D and tapered surface

Surface

Base

Rectangular surface

conceal electrical cables and monitor support brackets. They are installed with screws on to the technical panel of a Mediacom table and positioned at the desired distance from either side of the monitor.

o

Silver or Polar White.

Technical panel

General Information

downtown

10

!

- Dimensions : 4” x 5”

charging outlets - Touch retractable - Power cord : 10 feet

Multi-outlet modules for Downtown Collection tablesThe multi-outlet modules below cannot be ordered separately.

- Dimensions : 4¼'' diameter on the surface - Two power outlets and two communication outlets (cat. 5e, cable not included) - Power cord : 6'

- Dimensions : 5½'' x 11½'' on the surface- Three electric outlets (power cord : 6')- Three punch outs for communication connections

M2 Multi-Outlet Module

M3 Multi-Outlet Module

M4 Multi-Outlet Module - The module opens and closes with a switch and closes automatically after a few minutes of non-use. - Dimensions : 4¼'' x 15½'' on the surface - Three electric outlets (power cord : 6') - One communication outlet (RJ45) - One phone jack (RJ11) - Two audio jacks 3.5

- One HDMI outlet- Cables included for all outlets

- Sensor prevents rotation when the outlets are in use.

M5 Multi-Outlet Module- Dimensions : 4'' x 5'' - An electrical outlet and a punch out for communication outlets - Touch retractable - Power cord : 6 feet

M6 Multi-Outlet Module

With Bistro tables The option of multi-outlet models M2, M3, M4, M5 or M6 in bistro tables includes the addition of a metal conduit with removable cover, built into the leg of the table for discreet cable management.

M2-M5-M6 modules :Center or right

M3-M4 modules : Table 60'' or more – center or right. Table 54'' or less – center.

The Downtown Collection offers a range of solutions for electricity and cable management. The recessed multi-outlet module option is available on most tables. The model and position varies depending on the surface and the type of base. Please refer to the information in the price list.

M4 multi-outlet module

Table with metal leg :The Downtown Connection system is screwed directly on to the technical panel and is installed inside a vertical cable conduit with a removable “door” for access to cables. The connection access module is positioned on the surface above the power module.

*M4 multi-outlet not available.

Table with architectural base : The M4 multi-outlet module is positioned near the technical panel and cables are routed inside the panel through a grommet.

With Mediacom tables The M4 pivoting multi-outlet module and the linked communication system, Downtown Connection (M8), are optional on Mediacom tables.

The Downtown Connection system is installed directly inside the base, and the cable connection access module is positioned above it.

Bistro tables : The M4 multi-outlet module is positioned near the technical panel and cables are routed inside the panel through a grommet.

The Downtown Connection system is screwed directly on to the technical panel and is installed inside a vertical cable conduit with a removable “door” for access to cables. The connection access module is positioned on the surface above the power module.

Table and Technology Electrical Outlets

Multi-outlet position :

or or

General Information

downtown

11

!

Downtown Connection - M8

monitor.

Simply connect a data sharing cable to a laptop or tablet and press the control button on the same cable for the screen to appear on the monitor.

Components included with Downtown Connection : . 1 x electrical box, HDMI cable with four inputs . 4 x HDMI data sharing cables (6' long) . 1 x HDMI cable for monitor (12' long) . 1 x cable connection access module (recessed in the surface) . 1 x power bar (EPUP - power cord : 9')

Installing Downtown Connection The linked communication system selector housing is installed out of sight beneath the work surface (within a cable conduit or architectural base). It is connected to a monitor by an HDMI cable and is powered by an electrical cable connected to a conventional power outlet.

On top of the surface, a recessed cable access module provides access to 2 outlets, 2 punch outs for communication outlets and 4 HDMI data sharing cables directly connected to the selector housing. The 4 data sharing cables are 6' long (approximately 56'' can be brought to the surface) and have a control button that provides access to the monitor and lights up when enabled. When using the system, the data cables from the module are connected to the laptops and tablets. Once the work session has ended, cables slide easily inside the module where the excess cable is stored inside a cable conduit or an architectural base.

Monitor and support (not included)

2 outlets2 punch outs for communication outlets4 HDMI data sharing cables

The electronic box for the linked communication

system

Module :

Control button

Data sharing cable(max 4 users)

Control button :blue light activated

HDMI Switch : - 4x HDMI cables connected to computers - 1x HDMI cable connected to the monitor

Power bar

Installation of the Downtown Connection box requires electronic connections to be completed on-site.Please refer to the installation guide.

General Information

downtown

12

24"

24"

24"24"

17"

24"

6" 6"

19"

Mobile Panel with Downtown Connection System

The Downtown Connection system is also available on the mobile panel, allowing it to be used with different Downtown Collection tables.

It consists of a metal structure (3'' wide) on legs with casters. The panel is 38'' wide.

The panel is available in 3 heights perfectly matched with the 3 main table heights of the series : 24'' H, 29'' H and 40'' H. Paired with a table with a surface 1'' thick, the lower section of the panel reaches 1'' above the surface. However, paired with a table surface

Laminate (upper)Laminate (lower)

Laminate or marker board (upper)Metal (lower)

Electronic box HDMI cables (4)

Side 1 - Monitor Side 2 - Back

Lower

Upper

Dimensions of the 3 panel heights :

This panel has an upper and lower section. A 5” space between the two provides access to the linked communication system and 2 electrical outlets.

When the linked communication system is not in use, the retracted cables remain concealed inside the mobile panel. Only one electrical connection cable is accessible at the base of the panel.

Upper section : Side 1 of the panel is secured to the metal frame and is used for mounting a monitor. It is available in laminate only.

Side 2 of the panel is removable to facilitate cable management. It is available in laminate or high-gloss white marker board.

Lower section :The lower section houses Downtown Connection. Side 1 is

monitor with the maximum width of 40'' (diagonal). It includes the linked communication system, 2 power outlets and 1 power bar.

Power bar

Double electrical outlet

70" H panel 59" H panel

Surface 1"

Fixed

FixedRemovable

Removable

Surface 2"

General Information

downtown

13

36.5"

36.5"

17.5"

Mobile Panels

3 models of mobile panels are available :

. Marker board . Communication panel . Panel with the Downtown Connection system (see previous page)

They are comprised of a metal structure (3'' wide) on legs with casters and are 38'' wide.

Side 1 Side 2

White marker boardAccessory bar

White marker board

Communication Panel, 70'' H The communication panel is designed for the installation of a monitor with a maximum width of 40'' (diagonal).

Side 1 of the panel is secured to the metal frame, and is for installing a monitor. It is available in laminate only and comes with a recessed accessory bar for hanging accessories and shelves, sold separately.

metal shelf and laminate panel to conceal cables.

Laminate Accessory bar

Laminate or white marker board

Mobile Panel 70'' H

Side 1 has a recessed accessory bar, while Side 2 is full height.

Side 1 Side 2

Fixed Removable

General Information

downtown

14

AB

C

40

58

70

Privacy Screens

Complementary Products

Storage

Occasional tablesTwo models of occasional tables allow users to work comfortably on Downtown seating.

Tripod model (26'' H) : - Rectangular surface 16'' x 20'', 11/16'' thick - Tubular metal base (2'' dia), 3-prong.

C model (26'' H) : - Rectangular surface 13'' x16'', 1'' thick - Laminate sides, 1'' thick - Metal base plate- Storage space (magazines), inside width : 3''.

HookMetal hook screws in under a surface for hanging bags or personal belongings.

Charcoal, Silver or Polar White.

CushionsArtopex cushions are made of polyurethane foam with a fabric cover sewn on all 4 sides.

Available in 3 sizes : 12''x12", 12"x18" and 14"x14". For a complete selection of fabrics available, refer to the current Artopex fabric cards.

Ganging Bracket The ganging bracket is used to join two seats together for large

male and one female, and is screwed to the seat during installation.

joined together using a ganging bracket.

Cable Fasteners The single cable fasteners can be screwed under the seats to hold electrical cables routed under the seats.

Privacy screens are usually placed behind seating to create privacy for users of the space. The screen is made of a 1" tubular steel frame covered with a polyester 3D mesh fabric. For color choices available, see p15.

or with a shelf 1'' thick (C).

tapered painted metal feet. Feet of the vertical screen and screen with a shelf are centered ensuring stability. The center of gravity of the angled-top screen requires an offset foot, allowing the panel to be placed 4'' from a wall.

Dimensions and position of the feet (side view)

Storage units complete the Downtown Collection : storage 16¾'' H serves as occasional tables and storage 29'' H serves as bookcases. These storage units consist of a case made of

thickness of 1'' (TFL : code L1; HPL : code S1) or 2'' (HPL : code

2.5mm thick (2mm for the 2'') in a color matched to the surface

Storage 16¾'' H (16¾'' H in S2) - Open (12'' deep) - Open and shared (24'' deep)

Storage 29'' H- bookcase style

Privacy screen heights :

Junction bracket for privacy screensThe junction bracket serves to join 2 privacy screens, vertical or angled-top. It is made of 2 pieces of metal, available in 4 colors and is assembled during installation. Only one bracket is necessary to join 2 screens and to keep them aligned.

Junction bracket.Installed at the top of the screen.

General Information

downtown

15

DOWNTOWN Component Colors

Text at the bottom of the page always refers to the following table.

* Note : Colors (especially dark colors) may vary between TFL and HPL.

Surface * BaseLegs +

Cable Management*Mobile Panel Privacy Screen

TFL / HPL TFL / HPL Metal Side 1 Side 2 Mesh Fabric

White (BW)Charcoal (F)Frost (A)

Cherry (CH)Dark Oak (DK)Cayenne Maple (CM)Honey (HO)

Chestnut (CG)Maritime Maple (EM)Moka (PM)Douglas Pine (DP)Teak (TE)Tigerwood (TW)

Carbon (CB)Galaxy (GX)Sea Salt (SM)Twilight (TL)

Silver (3090)Polar White (3002)Charcoal (3064)Black (3067)

Marker board

White (SBL)

Mocha (MS00)Black (MS06)Paprika (MS11)Pewter (MS16)Sterling (MS26)

* Surface 1’’ : - T.F.L. (L1)

- H.P.L. (S1)

Surface 2’’ : - H.P.L. (S2)

* Some items in the price list also refer to this choice.

White (BW)Charcoal (F)Frost (A)

Cherry (CH)Dark Oak (DK)Cayenne Maple (CM)Honey (HO)

Chestnut (CG)Maritime Maple (EM)Moka (PM)Douglas Pine (DP)Teak (TE)Tigerwood (TW)

Carbon (CB)Galaxy (GX)Sea Salt (SM)Twilight (TL)

White (BW)Charcoal (F)Frost (A)

Cherry (CH)Dark Oak (DK)Cayenne Maple (CM)Honey (HO)

Chestnut (CG)Maritime Maple (EM)Moka (PM)Douglas Pine (DP)Teak (TE)Tigerwood (TW)

Carbon (CB)Galaxy (GX)Sea Salt (SM)Twilight (TL)

White (BW)Charcoal (F)Frost (A)

Cherry (CH)Dark Oak (DK)Cayenne Maple (CM)Honey (HO)

Chestnut (CG)Maritime Maple (EM)Moka (PM)Douglas Pine (DP)Teak (TE)Tigerwood (TW)

Carbon (CB)Galaxy (GX)Sea Salt (SM)Twilight (TL)

Feet

Silver (3090)Polar White (3002)Charcoal (3064)Black (3067)

General Information

downtown

16

Seating with alternative backrest

Seat fabric : WP39 (grade 2)

Multi-outlet : Right side

Bistro table with storage and multi-outlet moduleTable : 41"H, 84" longSurface : Sea Salt (SM)

Multi-outlet : M6, centered

Mediacom table, tapered with architectural baseTable : 24"H, 72" longFinish and thickness : HPL 2"

Metal : Silver (3090) Multi-outlet : Downtown Connection (M8)

Mobile panel with Downtown ConnectionPanel : 70"H

Metal : Silver (3090)

Ordering code : DW-DSRO182460-WP39-NX59-M7SR

Ordering code : DW-TiBi413084M-S2-SM-CB-M6C-3067

Ordering code : DW-TPAV244872TS-S2-GX-CB-3090-M8

Ordering code : DW-PMDBL7038-GX-SBL-3090

General Information

downtown

17

Typical layouts

. No hardware

Refer to the price list for the various options available for each component.

Rect. seating - 48" STO182448 $ 1953 Rect. seating - 48" (2) STF182448 $ 4 048 Rect. Seating - right SHRF182448 $ 1 667Rect. seating - 24'' STO182424 $ 1117 Seating - corner backrest CRF182424 $ 1 546 Rect. Seating - left SHLF182448 $ 1 667Seating - corner backrest CLO182430 $ 1744 Storage unit - 24''x12'' BK122416 $ 260 Armrest ARM1216 $ 319Upholstered table - top TLS172424 $ 1078 Occasional table - 17''H. TSDS1730 $ 680 Upholstered table - top TLS172412 $ 908Occasional table TAAC261316 $ 523

With multi-outlet module (M7) - $616With multi-outlet module (M6) - $660

Upholstered tables - top TLS172424 $ 1 078 Rect. seating - 48" (2) STF182448 $ 4 048 Ottomans - 18''H. (3) OT181818 $ 1 914S. corner backrest - right CRO182460 $ 2 420 Privacy screens - 48'' (2) PAN5848 $ 3 538 Lounge table - 24''H. TSDS244242 $ 752S. corner backrest - left (2) CLO182460 $ 4 840 Lounge table - 25''H. Ti252442 $ 972 Mobile panel - 54''H. PMDB5438 $ 7 657

(Downtown Connection included)With multi-outlet module (M6) - $660

Mediacom table - 24’’H. TPAi244860DS $ 2 279 Mediacom table - 24’’H. TPAV244860TS $ 2 292 Mediacom table - 41’’H. TPAi413072 $ 2 919Rect. seating - 48" (2) STF182448 $ 4 048 Trapezoid seating (3) SZ182470 $ 8 136 Stools (4) SSF302020 $ 5 764Rect. seating - 60" STF182460 $ 2 503S. corner backrest - right CRF182430 $ 1 837 With Downtown Connection - $4939S. corner backrest - left CLF182430 $ 1 837

With Downtown Connection - $4939

General Information

18

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

OTTOMANS 18" H.

Rectangular seating without backrest, 18''H.

Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

Multi-outlet module NOT AVAILABLE on ottomans 18'' deep.

Dimensions Code Price Spec.

A B C C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 18 OT 1573 1645 1722 1799 1925 2596 34 93 3,8 3,5

24 48 18 OT 1271 1331 1392 1458 1562 2145 26 74 3,1 2,8

24 30 18 OT 979 1029 1078 1128 1216 1562 10 45 2,6 2,4

24 24 18 OT 781 814 847 880 930 1331 8 36 1,7 1,6

18 18 18 OT 638 666 688 715 754 1040 5 25 1,3 1,2

RECTANGULAR SEATING WITH BACKREST

Rectangular seating with 3'' offset backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 18 54 19 STO 2426 2541 2657 2772 2970 4142 49 129 3,8 3,5 2,1 1,9

24 48 18 42 19 STO 1953 2052 2145 2239 2398 3388 38 102 3,1 2,8 1,7 1,6

24 30 18 24 19 STO 1375 1447 1524 1595 1722 2327 10 61 2,6 2,4 1,2 1,1

24 24 18 18 19 STO 1117 1166 1216 1276 1353 1964 8 48 1,7 1,6 0,1 0,9

Rectangular seating with flush backrest.

Possibilty of adding an armrest between rectangular seating with flush backrest, sold separately. See p.7.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

24 60 18 60 19 STF 2503 2624 2739 2860 3058 4268 49 133 3,8 3,5 2,3 2,1

24 48 18 48 19 STF 2024 2123 2222 2327 2492 3526 38 106 3,1 2,8 1,9 1,7

24 30 18 30 19 STF 1458 1535 1612 1689 1821 2514 10 65 2,6 2,4 1,4 1,3

24 24 18 24 19 STF 1177 1232 1287 1342 1436 2090 8 52 1,7 1,6 1,2 1,1

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 (if applicable) : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlet : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR),

left side (M7SL) or right side (M7SR), add $616, see p.7.

C.O.M. Fabric

Seat Backrest

C.O.M. Fabric

Seat Backrest

Price List

19

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

RECTANGULAR SEATING WITH HALF BACKREST

Rectangular seating with half backrest, 3'' offset or flush backrest.

Possibilty of adding an armrest between 2 rectangular seats with flush backrest, sold separately. See p.7.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

RIGHT seating

Dimensions Code Price Spec.

A B C D C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 30 18 SHRO 2052 2151 2255 2360 2525 3548 49 113 3,8 3,5 1,4 1,3

24 48 24 18 SHRO 1667 1755 1837 1925 2068 2904 38 90 3,1 2,8 1,2 1,1

OFFSET BACKREST

24 60 30 18 SHRF 2052 2151 2255 2360 2525 3548 49 113 3,8 3,5 1,4 1,3

24 48 24 18 SHRF 1667 1755 1837 1925 2068 2904 38 90 3,1 2,8 1,2 1,1

FLUSH BACKREST

LEFT seating

Dimensions Code Price Spec.

A B C D C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 30 18 SHLO 2052 2151 2255 2360 2525 3548 49 113 3,8 3,5 1,4 1,3

24 48 24 18 SHLO 1667 1755 1837 1925 2068 2904 38 90 3,1 2,8 1,2 1,1

OFFSET BACKREST

24 60 30 18 SHLF 2052 2151 2255 2360 2525 3548 49 113 3,8 3,5 1,4 1,3

24 48 24 18 SHLF 1667 1755 1837 1925 2068 2904 38 90 3,1 2,8 1,2 1,1

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR),

left side (M7SL) or right side (M7SR), add $616, see p.7.

C.O.M. Fabric

Seat Backrest

C.O.M. Fabric

Seat Backrest

Price List

20

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

RECTANGULAR SEATING WITH ALTERNATING HALF BACKRESTS

Rectangular seating with alternating backrests, 3'' offset or flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

RIGHT seating

Multi-outlet module M7 option available on the front (FR) or the sides (SL or SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 18 DSRO 2365 2486 2607 2728 2937 4120 49 125 3,8 3,5 2,4 2,2

OFFSET BACKRESTS

24 60 30 18 DSRF 2530 2662 2789 2921 3135 4494 49 133 3,8 3,5 2,7 2,5

FLUSH BACKRESTS

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front right (M7FR), left side (M7SL) or right side (M7SR), add $616, see p.7.

LEFT seating

Multi-outlet module M7 option available on the front (FL) or the sides (SL or SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 18 DSLO 2365 2486 2607 2728 2937 4120 49 125 3,8 3,5 2,4 2,2

OFFSET BACKRESTS

24 60 30 18 DSLF 2530 2662 2789 2921 3135 4494 49 133 3,8 3,5 2,7 2,5

FLUSH BACKRESTS

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), left side (M7SL) or right side (M7SR), add $616, see p.7.

Seat Backrest

C.O.M. Fabric

Seat Backrest

C.O.M. Fabric

Price List

21

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

SQUARE SEATING WITH CORNER BACKREST

Square seating with corner backrest, 3'' offset or flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Multi-outlet module M7 option available on the left (FL) or the right (SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 24 24 24 18 CRO 1474 1546 1612 1683 1799 2651 25 58 1,7 1,6 1,9 1,7

OFFSET BACKREST

24 24 27 27 18 CRF 1546 1617 1689 1766 1887 2827 25 61 1,7 1,6 2,1 1,9

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : left (M7FL) or right (M7SR), add $616, see p.7.

C.O.M. Fabric

Seat Backrest

Price List

22

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

RECTANGULAR SEATING WITH CORNER BACKREST

Rectangular seating with corner backrest, 3'' offset or flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

RIGHT seating

Multi-outlet module M7 option available on the front (FL or FR) or the side (SL). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 30 24 30 18 CRO 1744 1837 1931 2019 2173 3064 25 70 2,6 2,4 2,1 1,9

OFFSET BACKREST

24 30 27 33 18 CRF 1837 1931 2024 2123 2277 3240 25 73 2,6 2,4 2,3 2,1

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR) or left side (M7SL), add $616, see p.7.

LEFT seating

Multi-outlet module M7 option available on the front (FL or FR) or the side (SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 30 24 30 18 CLO 1744 1837 1931 2019 2173 3064 25 70 2,6 2,4 2,1 1,9

OFFSET BACKREST

24 30 27 33 18 CLF 1837 1931 2024 2123 2277 3240 25 73 2,6 2,4 2,3 2,1

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR) or right side (M7SR), add $616, see p.7.

C.O.M. Fabric

Backrest

Seat Backrest

Seat

C.O.M. Fabric

Price List

23

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

RECTANGULAR SEATING WITH CORNER BACKREST

Rectangular seating with corner backrest, 3'' offset or flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

RIGHT seating

Multi-outlet module M7 option available on the front (FL or FR) or the side (SL). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 36 18 CRO 2420 2541 2662 2783 2981 4263 49 121 3.8 3,5 2,3 2,1

24 48 24 24 18 CRO 1964 2063 2162 2261 2431 3465 38 96 3,1 2,8 0,2 1,8

OFFSET BACKREST

24 60 27 39 18 CRF 2508 2635 2756 2882 3086 4455 49 123 3,8 3,5 2,5 2,3

24 48 27 27 18 CRF 2035 2140 2239 2343 2519 3641 38 99 3,1 2,8 2,1 1,9

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR) or left side (M7SL), add $616, see p.7.

LEFT seating

Multi-outlet module M7 option available on the front (FL or FR) or the side (SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 36 18 CLO 2420 2541 2662 2783 2981 4263 49 121 3,8 3,5 2,3 2,1

24 48 24 24 18 CLO 1964 2063 2162 2261 2431 3465 38 96 3,1 2,8 2,0 1,8

OFFSET BACKREST

24 60 27 39 18 CLF 2508 2635 2756 2882 3086 4455 49 123 3,8 3,5 2,5 2,3

24 48 27 27 18 CLF 2035 2140 2239 2343 2519 3641 38 99 3,1 2,8 2,1 1,9

FLUSH BACKREST

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR) or right side (M7SR), add $616, see p.7.

C.O.M. Fabric

Seat Backrest

C.O.M. Fabric

Seat Backrest

Price List

24

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

RECTANGULAR SEATING WITH ALTERNATING CORNER BACKRESTS

Rectangular seating with alternating corner backrests, 3'' offset or flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

RIGHT seating

Multi-outlet module M7 option available on the front (FR). See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 24 DCRO 2959 3108 3262 3410 3658 5236 49 137 3,8 3,5 3,8 3,5

OFFSET BACKRESTS

24 60 27 27 DCRF 3102 3256 3416 3575 3834 5588 49 143 3,8 3,5 4,2 3,8

FLUSH BACKRESTS

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module, specify the position : front right (M7FR), add $616, see p.7.

LEFT seating

Multi-outlet module M7 option available on the front (FL). See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 60 24 24 DCLO 2959 3108 3262 3410 3658 5236 49 137 3,8 3,5 3,8 3,5

OFFSET BACKRESTS

24 60 27 27 DCLF 3102 3256 3416 3575 3834 5588 49 143 3,8 3,5 4,2 3,8

FLUSH BACKRESTS

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module, specify the position : front left (M7FL), add $616, see p.7.

Seat Backrest

C.O.M. Fabric

C.O.M. Fabric

Seat Backrest

Price List

25

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

TRAPEZOID OTTOMAN AND SEATING

Trapezoid ottoman, 60o, without backrest.Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

24 70 42 18 OZ 1700 1788 1876 1964 2112 3108 36 89 4,4 4,0

Trapezoid seat with flush backrest.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Multi-outlet module M7 option available on the front (FL or FR) or the sides (SL or SR). One choice only. See p.7.

24 73 42 18 SZ 2712 2849 2992 3135 3372 5000 53 137 4,4 4,0 2,8 2,6

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 (if applicable) : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Options Multi-outlets : Option of multi-outlet module (one choice only), specify the position : front left (M7FL), front right (M7FR),

left side (M7SL) or right side (M7SR), add $616, see p.7.

C.O.M. Fabric

Seat Backrest

Price List

26

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

ROUND OTTOMANS

Round ottoman, 18''H.

Multi-outlet module not available.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

36 18 OC 1227 1287 1348 1408 1507 2437 18 70 0,3 2,7

24 18 OC 787 820 847 875 924 1425 8 31 1,6 1,5

18 18 OC 556 578 600 627 666 957 5 18 1,3 1,2

Half-moon ottoman, 18''H.

Multi-outlet module not available.

54 27 18 OCH 1496 1584 1667 1755 1898 2178 34 97 4,3 3,9

48 24 18 OCH 1188 1265 1348 1419 1551 1705 26 76 3,9 3,6

ARMREST

An armrest may be installed between 2 rectangular seats with flush backrests.

Installation on-site, hardware included, see p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

16 12 ARM 319 336 347 363 391 501 5 5 0,8 0,7

Specify Code : Consult the above product code list.

Fabric : Specify the fabric, refer to Artopex seating fabric sample cards.

C.O.M. Fabric

C.O.M. Fabric

Seat

Fabric

Price List

27

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

STOOLS WITHOUT BACKREST

Round stool.

Footrest included, specify finish.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

19 30 OCS 1223 1263 1302 1340 1404 1888 10 30 2,0 1,8

Square stool.

Footrest included, specify finish.

20 20 30 OTS 1347 1410 1474 1538 1644 2042 10 41 3,2 2,9

Specify Code : Consult the above product code list.

Fabric : Specify the fabric, refer to Artopex seating fabric sample cards.

Footrest : Specify the color of the footrest : Black (3067), Charcoal (3064), Silver (3090).

STOOL WITH BACKREST

Stool with flush backrest.

Footrest included, specify finish.

A different fabric may be specified for the backrest. The highest fabric grade price applies to the entire chair.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m yd m

20 20 30 10 16 SSF 1441 1518 1601 1683 1821 2420 16 54 3,2 2,9 1,0 0,9

Specify Code : Consult the above product code list.

Fabric 1 : Specify the fabric for the seat, refer to Artopex seating fabric sample cards.

Fabric 2 : Specify the fabric for the backrest. When ordering 2 different colors, the highest fabric grade price applies to the entire chair.

Footrest : Specify the color of the footrest : Black (3067), Charcoal (3064), Silver (3090).

C.O.M. Fabric

Seat Backrest

Seat

C.O.M. Fabric

Price List

28

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

OTTOMANS 30" H.

Square or rectangular ottomans without backrest, 30''H.

These ottomans may be used to create multi-level ''bleachers''.

Multi-outlet module not available.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

24 60 30 OT 2134 2272 2409 2552 2783 3845 49 143 6,8 6,2

24 48 30 OT 1667 1782 1903 2024 2228 3020 38 114 5,9 5,4

24 30 30 OT 1320 1414 1496 1584 1727 2464 17 75 4,3 3,9

24 24 30 OT 1144 1221 1304 1381 1513 2057 10 60 4,0 3,7

OTTOMANS 42" H.

Rectangular ottomans without backrest, 42''H.

These ottomans may be used to create multi-level ''bleachers''.

Multi-outlet module not available.

24 48 42 OT 1925 2046 2162 2283 2486 3801 38 154 5,9 5,4

24 30 42 OT 1535 1623 1711 1799 1942 3075 38 119 4,3 3,9

Multi-level ''bleachers''

Specify Code : Consult the above product code list.

Fabric : Specify the fabric, refer to Artopex seating fabric sample cards.

C.O.M. Fabric

Seat

Price List

29

downtownSeating

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

UPHOLSTERED TABLES

Square or rectangular upholstered tables.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

On tables 48'' and higher, option of centered (M6C) or left and right (M6LR) multi-outlet module, see p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

24 60 16¾ TUS 1309 1386 1458 1535 1656 2332 34 75 3,8 3,5

24 54 16¾ TUS 1128 1194 1260 1326 1441 2079 34 68 3,4 3,1

24 48 16¾ TUS 985 1051 1111 1172 1276 1859 34 60 3,1 2,8

24 30 16¾ TUS 781 831 880 930 1018 1364 10 45 2,6 2,4

24 24 16¾ TUS 677 722 770 814 891 1254 8 25 2,4 2,2

24 12 16¾ TUS 534 567 600 627 682 908 5 13 1,7 1,6

Round upholstered tables.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

36 16¾ TUC 996 1051 1117 1177 1276 1958 18 60 3,1 2,8

30 16¾ TUC 792 842 891 941 1029 1452 18 41 2,6 2,4

24 16¾ TUC 649 688 732 770 836 1249 8 27 2,1 1,9

Half-moon upholstered tables.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

54 27 16¾ TUCH 1161 1249 1337 1419 1562 1843 34 85 4,3 3,9

48 24 16¾ TUCH 952 1029 1106 1183 1309 1463 26 67 3,9 3,6

Triangular upholstered table with a 60° angle.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

24 30 16¾ TUA 737 776 820 858 919 1282 10 24 2,0 1,8

Multi-outlet module position

Tables 48'' and higher

Specify Code : Consult the above product code list.

Fabric : Specify the fabric, refer to Artopex seating fabric sample cards.

Options Multi-outlet : Option of multi-outlet module, centered (M6C), add $660, see p.7 and 10.

Double multi-outlet (TUS172448 to TUS172460) : Option of multi-outlet module, left and right (M6LR), add $1320, see p.7 and 10.

Fabric

C.O.M. Fabric

or

Price List

30

downtownSe

atin

g

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

UPHOLSTERED TABLES WITH 2'' LAMINATED TOP

Square or rectangular upholstered tables with 2" high pressure laminated surface.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

On tables 48'' and higher, option of centered (M6C) or left and right (M6LR) multi-outlet module, see p.7.

Dimensions Code Price Spec.

A B C D E C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb yd m

24 60 16¾ TLS 2096 2151 2200 2255 2343 2822 34 108 2,7 2,5

24 54 16¾ TLS 1887 1936 1986 2035 2118 2574 34 93 2,5 2,3

24 48 16¾ TLS 1711 1760 1804 1854 1925 2332 34 87 2,6 2,4

24 30 16¾ TLS 1293 1326 1364 1397 1458 1771 10 62 1,9 1,7

24 24 16¾ TLS 1078 1111 1144 1177 1232 1491 8 39 1,7 1,6

24 12 16¾ TLS 908 924 941 957 990 1238 5 19 1,0 0,9

Round upholstered tables with 2" high pressure laminated surface.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

36 16¾ TLC 1700 1738 1777 1815 1881 2206 18 83 2,0 1,8

30 16¾ TLC 1353 1386 1419 1447 1502 1766 18 58 1,7 1,6

24 16¾ TLC 1056 1084 1108 1134 1177 1397 8 37 1,4 1,3

Half-moon upholstered tables with 2" high pressure laminated surface.

Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

54 27 16¾ TLCH 1920 1969 2024 2074 2162 2805 34 112 2,7 2,5

48 24 16¾ TLCH 1540 1584 1628 1678 1755 2310 26 88 2,2 2,0

Triangular upholstered table, 60o angle, with 2" high pressure laminated surface.Option of centered multi-outlet module (M6), specify (M6C), see p.7 and 10.

24 30 16¾ TLA 1287 1320 1359 1392 1452 1595 10 32 1,8 1,6

Multi-outlet module position

Tables 48'' and higher

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15.

Fabric : Specify the fabric, refer to Artopex seating fabric sample cards.

Options Multi-outlet : Option of multi-outlet module, centered (M6C), add $660, see p.7 and 10.

Double multi-outlet (TLS172448 to TLS172460) : Option of multi-outlet module, left and right (M6LR), add $1320, see p.7 and 10.

Fabric

C.O.M. Fabric

or

Price List

31

downtownTables

17½''H. OCCASIONAL TABLES

Round occasional tables with metal tubular leg (3" diam.) and round base plate (18" diam.).

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Multi-outlet module not available.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C L1 S1 S2 Cu.Ft. lb

30 17½ TRDR 680 828 899 5,2 58

24 17½ TRDR 658 796 840 4,8 52

Elliptical occasional table with metal tubular leg (3" diam.) and round base plate (18" diam.).

21 36 17½ TEDR 658 806 867 5 54

Square occasional tables with metal tubular leg (3" diam.) and square base plate (18" x 18").

30 30 17½ TSDS 680 828 899 5,2 71

24 24 17½ TSDS 658 796 840 4,8 63

Square occasional tables with square metal tubular legs (2½" x 2½").

24 36 17½ TMASS 546 662 721 2,5 35

24 24 17½ TMASS 510 613 638 2 28

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

17½''H. OCCASIONAL TABLES 2''

Occasional tables with surface and gables in 2'' high pressure laminate.

Multi-outlet module not available.

Dimensions Code H.P.L. Specifications

A B C S2 Cu.Ft. lb

24 36 17½ Ti 801 10,1 53

24 30 17½ Ti 752 8,5 48

24 24 17½ Ti 704 6,9 43

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

1'' SURFACE 2" SURFACE

2" SURFACE

Price List

32

downtownTa

bles

24''H. LOUNGE TABLES

Round tables with metal tubular leg (4" diam.) and round base plate.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of centered round multi-outlet module (M2). This base allows for routing of cables through center leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D G L1 S1 S2 Cu.Ft. lb

48 24 24 4/5 759 979 1183 10,9 111

42 24 24 4 752 897 1053 10,2 100

36 21 24 3/4 701 805 947 9,2 77

30 21 24 3 681 746 848 8,7 69

Square tables with metal tubular leg (4'' diam.) and square base plate.

48 48 24 24 4 759 979 1183 10,9 138

42 42 24 24 4 752 897 1053 10,2 123

36 36 21 24 4 701 805 947 9,2 96

30 30 21 24 4 681 746 848 8,7 85

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option, installed at center (M2), add $330, see p.10.

Square tables, architectural base with 90° metal corners.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Multi-outlet module option (includes a removable panel on the base for access to cabling).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D G L1 S1 S2 Cu.Ft. lb

60 60 30 24 8 927 1295 1492 19,3 145

54 54 24 24 4 880 1177 1370 16,5 116

48 48 24 24 4 849 1077 1268 12,6 99

42 42 18 24 4 801 950 1111 8,1 75

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), See p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Metal : Specify the color of the metal : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

1'' SURFACE 2" SURFACE

1'' SURFACE 2" SURFACE

Price List

33

downtownTables

29''H. ROUND TABLES

Round tables with metal tubular leg (4" diam.) and round base plate.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of centered round multi-outlet module (M2). This base allows for routing of cables through center leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

48 24 29 4/5 785 1005 1209 12,9 112

42 24 29 4 779 923 1079 12,2 101

36 21 29 3/4 722 826 968 10,7 78

30 21 29 3 702 767 869 10,2 70

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlets : Round multi-outlet module option (M2), add $330, see p.10.

Round tables with round metal tubular legs (3'' diam.).

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

A stiffener is available for surfaces 54" and 60", see p.55.

Multi-outlet module option (M6), see p.10.

Caster option (includes two locking casters).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

60 29 6 904 1266 1463 7,1 101

54 29 5 873 1165 1357 6,1 86

48 29 4/5 833 1053 1192 5,1 71

42 29 4 826 969 1077 4,3 59

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlets : Multi-outlet module option (M6), add $660, see p.10.

Casters : Caster option, add CA (+$22), see p.8.

1'' SURFACE 2" SURFACE

1'' SURFACE 2" SURFACE

Price List

34

downtownTa

bles

29''H. SQUARE TABLES

Square tables with metal tubular leg (4'' diam.) and square base plate.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of centered round multi-outlet module (M2). This base allows for routing of cables through center leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D G P L1 S1 S2 Cu.Ft. lb

48 48 29 24 4 785 1005 1209 12,9 139

42 42 29 24 4 779 923 1079 12,2 134

36 36 29 21 4 722 826 968 10,7 97

30 30 29 21 4 702 767 869 10,2 86

Square and rectangular tables with square metal tubular legs (2½" diam.).

A stiffener is available for surfaces 54" to 72", see p.55.

Multi-outlet module option (M6), see p.10.

Square tables

60 60 29 8 4 663 1031 1228 6,5 124

54 54 29 4 4 633 930 1122 5,6 105

48 48 29 4 4 602 828 1021 4,9 88

42 42 29 4 4 585 734 895 4,2 73

36 36 29 4 4 553 658 768 3,7 60

*WARNING : The base of the mobile panel may interfere with the tubular legs of the 42'' table.

Rectangular tables

36 84 29 6/8 6 868 1134 1392 6,8 120

36 72 29 6 4 837 1054 1299 5,3 96

36 66 29 6 4 824 1016 1257 5 90

G : Seating capacity.

P : Number of legs.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet (TSDS): Round multi-outlet module option (M2), add $330, see p.10.

Multi-outlet (TSPS): Multi-outlet module option (M6), add $660, see p.10.

2" SURFACE1'' SURFACE

Price List

35

downtownTables

29''H. SQUARE TABLES WITH ARCHITECTURAL BASE

Square tables, architectural base with 90° metal corners.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Multi-outlet module option (includes a removable panel on the base for access to cabling).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D G L1 S1 S2 Cu.Ft. lb

60 60 30 29 8 1004 1372 1569 22,3 139

54 54 24 29 4 958 1255 1447 18,5 134

48 48 24 29 4 926 1154 1346 14,6 97

42 42 18 29 4 879 1027 1189 9,1 86

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Metal : Specify the color of the metal : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

1'' SURFACE 2" SURFACE

Price List

36

downtownTa

bles

29''H. COLLABORATIVE WORK TABLES WITH METAL LEGS

Rectangular collaborative work tables. 2 square metal tubular legs on the back and one metal tubular leg with square base plate on the front.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of round multi-outlet module (M2), allows the routing of cables through centered leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

48 72 29 5 1018 1370 1559 19 180

48 60 29 3 996 1288 1478 18 166

"D" shaped collaborative work tables. 2 round metal tubular legs on the back and one metal tubular leg with round base plate on the front.

48 72 29 5 1085 1414 1624 19 157

48 60 29 3 1060 1340 1516 18 144

Tapered collaborative work tables. 2 round metal tubular legs on the back and one metal tubular leg with round base plate on the front.

48 72 29 5 1085 1414 1624 19 157

48 60 29 3 1060 1340 1516 18 144

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlets : Round multi-outlet module option (M2), add $330, see p.10.

1'' SURFACE 2" SURFACE

Price List

37

downtownTables

29''H. COLLABORATIVE WORK TABLES WITH METAL LEGS AND ARCHITECTURAL BASE

Rectangular collaborative work tables. 2 square metal tubular legs on the back and one architectural base with 90o metal corners on the front.Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Multi-outlet module option (includes a removable panel on the base for access to cabling).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

48 72 29 6 1169 1522 1712 14,5 139

48 60 29 4 1147 1441 1630 13,5 125

"D" shaped collaborative work tables. 2 square metal tubular legs on the back and one architectural base with 90o metal corners on the front.

48 72 29 6 1159 1489 1700 14,5 120

48 60 29 4 1135 1415 1591 13,5 107

Tapered collaborative work tables. 2 square metal tubular legs on the back and one architectural base with 90o metal corners on the front.

48 72 29 6 1159 1489 1700 14,5 120

48 60 29 4 1135 1415 1591 13,5 107

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

1'' SURFACE 2" SURFACE

Price List

38

downtownTa

bles

29''H. COLLABORATIVE WORK TABLES WITH ARCHITECTURAL BASE AND LAMINATE GABLE

Rectangular collaborative work tables. Laminate gable and architectural base with 90o metal corners with modesty panels.Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Multi-outlet module option (includes a removable panel on the base for access to cabling).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

48 72 29 6 1090 1442 1631 16,6 168

48 60 29 4 1063 1356 1546 15,6 151

"D" shaped collaborative work tables. Laminate gable and architectural base with 90o metal corners and modesty panels.

48 72 29 6 1079 1409 1619 16,6 149

48 60 29 4 1051 1330 1506 15,6 133

Tapered collaborative work tables. Laminate gable and architectural base with 90o metal corners and modesty panels.

48 72 29 6 1079 1409 1619 16,6 149

48 60 29 4 1051 1330 1506 15,6 133

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

1'' SURFACE 2" SURFACE

Price List

39

downtownTables

40''H. ROUND TABLES

Round table with metal tubular leg (4" diam.) and round base plate.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of centered round multi-outlet module (M2). This base allows for routing of cabling through center leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C G L1 S1 S2 Cu.Ft. lb

42 24 40 4 800 943 1099 17,2 103

36 24 40 3/4 766 870 1012 16,7 90

30 21 40 3 700 763 866 13,2 73

40''H. SQUARE TABLES

Square table with metal tubular leg (4" diam.) and square base plate.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of centered round multi-outlet module (M2). This base allows for routing of cabling through center leg.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D G L1 S1 S2 Cu.Ft. lb

42 42 24 40 4 800 943 1099 17,2 126

36 36 24 40 4 766 870 1012 16,7 113

30 30 21 40 4 700 763 866 13,2 88

G : Seating capacity.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Round multi-outlet module option, installed at center (M2), add $330, see p.10.

1'' SURFACE 2" SURFACE

1'' SURFACE 2" SURFACE

Price List

40

downtownTa

bles

BISTRO TABLES - 41''H, 30''H and 25''H.

Tables with surface and gables in 2'' high pressure laminate.

5''H center modesty panels are included to ensure base stability.

Multi-outlet module option is available on the same tables, see next page.

30'' deep tables

Dimensions Code H.P.L. Specifications

A B C S2 Cu.Ft. lb

41''H 30 96 41 Ti 1904 12,7 153

30 84 41 Ti 1796 11,7 142

30 72 41 Ti 1687 10,7 130

30 60 41 Ti 1579 9,5 119

30''H 30 96 30 Ti 1716 11,4 135

30 84 30 Ti 1607 10,4 124

30 72 30 Ti 1499 9,4 112

30 60 30 Ti 1390 8,4 101

25''H 30 72 25 Ti 1419 8,9 104

30 66 25 Ti 1361 8,4 99

30 60 25 Ti 1301 7,9 93

30 54 25 Ti 1243 7,4 87

30 48 25 Ti 1185 6,9 81

30 42 25 Ti 1126 6,4 76

30 36 25 Ti 1067 5,9 70

30 30 25 Ti 1009 5,4 65

24'' deep tables

41''H 24 96 41 Ti 1587 10,6 127

24 84 41 Ti 1498 9,7 118

24 72 41 Ti 1410 8,9 108

24 60 41 Ti 1321 8 99

30''H 24 96 30 Ti 1436 9,6 111

24 84 30 Ti 1346 8,7 102

24 72 30 Ti 1258 7,8 92

24 60 30 Ti 1169 6,9 83

25''H 24 72 25 Ti 1216 7,5 86

24 66 25 Ti 1167 7,1 82

24 60 25 Ti 1119 6,7 77

24 54 25 Ti 1070 6,3 72

24 48 25 Ti 1022 5,9 67

24 42 25 Ti 972 5,5 62

24 36 25 Ti 924 5,1 58

24 30 25 Ti 876 4,7 53

Specify Code : Consult codes listed above.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

2" SURFACE

Price List

41

downtownTables

BISTRO TABLES WITH MULTI-OUTLET - 41''H, 30''H and 25''H.

Tables with surface and gables in 2'' high pressure laminate. Multi-outlet module included.

5''H center modesty panels are included to ensure base stability.

Multi-outlet module include a vertical cable conduit built into the gable. See p.10.

30'' deep tables

Multi-outlet modules : (M2), (M3), (M4), (M5) or (M6)

Dimensions Code M-Outlet position H.P.L. Specifications

A B C S2 Cu.Ft. lb

41''H 30 96 41 Ti M 2042 12,7 153

30 84 41 Ti M 1934 11,7 142

30 72 41 Ti M 1825 10,7 130

30 60 41 Ti M C - R C - R 1716 9,5 119

30''H 30 96 30 Ti M 1854 11,4 135

30 84 30 Ti M 1745 10,4 124

30 72 30 Ti M 1637 9,4 112

30 60 30 Ti M C - R C - R 1528 8,4 101

25''H 30 72 25 Ti M 1419 8,9 104

30 66 25 Ti M 1361 8,4 99

30 60 25 Ti M 1301 7,9 93

30 54 25 Ti M 1243 7,4 87

30 48 25 Ti M 1185 6,9 81

30 42 25 Ti M 1126 6,4 76

30 36 25 Ti M 1067 5,9 70

30 30 25 Ti M 1009 5,4 65

24'' deep tables

Multi-outlet modules : (M5) or (M6)

41''H 24 96 41 Ti M 1724 10,6 127

24 84 41 Ti M 1636 9,7 118

24 72 41 Ti M 1547 8,9 108

24 60 41 Ti M C - R 1459 8 99

30''H 24 96 30 Ti M 1572 9,6 111

24 84 30 Ti M 1484 8,7 102

24 72 30 Ti M 1395 7,8 92

24 60 30 Ti M C - R 1307 6,9 83

25''H 24 72 25 Ti M 1353 7,5 86

24 66 25 Ti M 1308 7,1 82

24 60 25 Ti M 1263 6,7 77

24 54 25 Ti M 1218 6,3 72

24 48 25 Ti M 1173 5,9 67

24 42 25 Ti M 1126 5,5 62

24 36 25 Ti M 1081 5,1 58

24 30 25 Ti M 1036 4,7 53

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Multi-outlet (if available) : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

Position (if available) : Consult the above reference list and specify the multi-outlet position, center (C) or right (R).

Metal : Specify the color of the metal conduit : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

2" SURFACE

Price List

42

downtownTa

bles

BISTRO TABLES WITH BUILT-IN STORAGE - 41''H and 30''H.

Tables with surface and gables in 2'' high pressure laminate.

One gable is replaced by an open storage unit with shared access (left or right) and adjustable shelf. (Interior space : 12'' W x 14.5'' D)

The storage unit and shelves are the same color as the base.

5''H. center modesty panels are included to ensure base stability.

Additional shelves available, sold separately, see p.54.

Dimensions Code H.P.L. Specifications

A B C D G S2 Cu.Ft. lb

41''H 30 96 41 14 6 TiBi 1904 21,1 209

30 84 41 14 4 TiBi 1796 20,1 198

30 72 41 14 4 TiBi 1687 19,1 186

30''H 30 96 30 14 6 TiBi 1729 17,6 173

30 84 30 14 4 TiBi 1624 16,6 162

30 72 30 14 4 TiBi 1519 15,6 150

G : Seating capacity.

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15

Base : Specify the color of the base (Base finish), see p.15

Same tables as above with multi-outlet modules. The multi-outlet module may be installed in center (C) or right side (R), side opposite storage.

Multi-outlet module includes a vertical cable conduit built into the gable. See p.10.

Multi-outlet modules : (M2), (M3), (M4), (M5) or (M6)

Dimensions Code M-Outlet position H.P.L. Specifications

A B C D G S2 pi3 lb

41''H 30 96 41 14 6 TiBi M 2049 21,1 209

30 84 41 14 4 TiBi M 1945 20,1 198

30 72 41 14 4 TiBi M 1839 19,1 186

30''H 30 96 30 14 6 TiBi M 1867 17,6 173

30 84 30 14 4 TiBi M 1761 16,6 162

30 72 30 14 4 TiBi M 1657 15,6 150

G : Seating capacity.

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

Multi-outlet : Round multi-outlet module option (M2) add $330, recessed (M3) add $1133, pivoting (M4) add $825,

data outlet (M5) add $385, USB outlet (M6) add $660, see p.10.

Position : Specify the multi-outlet position, center (C) or right (R).

Metal : Specify the color of the metal conduit : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

2" SURFACE

2" SURFACE

Price List

43

downtownM

ediacom Tables

MEDIACOM BISTRO TABLES - 41''H and 30''H

Tables with 2'' surface, one 2'' gable and a higher technical panel at the opposite.

This panel with a metal contour serves as surface support, for mounting monitors and cable management. See p.9.

The technical panel protrudes 1" on each side of the table.

Option of multi-outlet module or ''Downtown Connection'' (linked communication system).

'Downtown Connection'' option (M8) includes a vertical cable conduit attached to the technical panel. See p.10.

Dimensions Code H.P.L. Specifications

A B C D G S2 Cu.Ft. lb

36 96 41 73 6 TPAi 3565 22,9 281

36 84 41 73 6 TPAi 3429 21,7 268

36 72 41 73 6 TPAi 3293 20,5 255

36 60 41 73 4 TPAi 3157 19,3 241

30 96 41 73 6 TPAi 3152 19,9 242

30 84 41 73 6 TPAi 3035 18,8 231

30 72 41 73 6 TPAi 2919 17,7 219

30 60 41 73 4 TPAi 2804 16,6 207

36 96 30 62 6 TPAi 3334 20,4 254

36 84 30 62 6 TPAi 3199 19,2 241

36 72 30 62 6 TPAi 3062 18 228

36 60 30 62 4 TPAi 2927 16,8 214

30 96 30 62 6 TPAi 2958 17,6 221

30 84 30 62 6 TPAi 2841 16,5 209

30 72 30 62 6 TPAi 2726 15,4 197

30 60 30 62 4 TPAi 2610 14,3 185

G : Seating capacity.

Specify Code : Consult the above product code list.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base and panel (Base finish), see p.15.

Metal : Specify the color of the metal components : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Pivoting multi-outlet module option (M4) add $825 or Downtown Connection (M8) add $4939. See p.10-11.

FINISHING PROFILE

Finishing profiles used to conceal electrical cables and the monitor support, see p.9.

The profiles are installed on the technical panel of a Mediacom table, on either side of the monitor.

Set of two.

NOTE : These finishing profiles can also be installed on technical panels of the Mediacom tables on pages 44 and 45.

Dimensions Code Price Specifications

A Cu.Ft. lb

32 TPAFP 77 0,4 11

Specify Code : Consult the above product code list.

Metal : Specify the color of the finishing profiles : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

2" SURFACE

Price List

44

downtownM

edia

com

Tab

les

MEDIACOM TABLES WITH METAL LEGS - 40''H, 29''H and 24''H.

Rectangular Mediacom table with metal tubular leg and square base plate. Available in 3 heights.

This panel with a metal contour serves as a surface support, for mounting monitors and cable management. See p.9.

The technical panel protrudes 1" on each side of the table.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of ''Downtown Connection'' (linked communication system).

''Downtown Connection'' option (M8) includes a vertical cable conduit attached to the technical panel. See p.10.

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D L1 S1 S2 Cu.Ft. lb

48 72 40 73 TPAi DS 2499 2852 3042 35,3 345

48 60 40 73 TPAi DS 2477 2771 2960 34,3 331

48 72 29 62 TPAi DS 2379 2732 2922 29,1 322

48 60 29 62 TPAi DS 2357 2651 2840 28,1 308

48 72 24 57 TPAi DS 2302 2654 2844 26,7 312

48 60 24 57 TPAi DS 2279 2573 2762 25,7 298

''D'' shaped Mediacom table with metal tubular leg and round base plate.

48 72 40 73 TPAD DR 2566 2896 3106 35,3 322

48 60 40 73 TPAD DR 2543 2823 2999 34,3 309

48 72 29 62 TPAD DR 2446 2776 2987 29,1 299

48 60 29 62 TPAD DR 2423 2702 2879 28,1 286

48 72 24 57 TPAD DR 2368 2698 2908 26,7 289

48 60 24 57 TPAD DR 2345 2625 2801 25,7 276

Tapered Mediacom table with metal tubular leg and round base plate.

48 72 40 73 TPAV DS 2566 2896 3106 35,3 322

48 60 40 73 TPAV DS 2543 2823 2999 34,3 309

48 72 29 62 TPAV DS 2446 2776 2987 29,1 299

48 60 29 62 TPAV DS 2423 2702 2879 28,1 286

48 72 24 57 TPAV DS 2368 2698 2908 26,7 289

48 60 24 57 TPAV2 DS 2345 2625 2801 25,7 276

NOTE : Finishing profiles used to conceal electrical cables and the monitor support are available on p.43.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the panel (Base finish), see p.15.

Metal : Specify the color of the metal components : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : ''Downtown Connection'' option (M8) add $4939. See p.11.

1'' SURFACE 2" SURFACE

Price List

45

downtownM

ediacom Tables

MEDIACOM TABLES WITH ARCHITECTURAL BASE - 40''H, 29''H and 24''H.

Rectangular Mediacom table, architectural base with 90° metal corners. Available in 3 heights.

This panel with a metal contour serves as a surface support, for mounting monitors and cable management. See p.9.

The technical panel protrudes 1" on each side of the table.

Surface is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

The heights below are with a 1'' surface. For a 2'' surface, add 1" to the total height indicated.

Option of multi-outlet module or ''Downtown Connection'' (linked communication system).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C D L1 S1 S2 Cu.Ft. lb

48 72 40 73 TPAi RS 2725 3078 3267 28,5 322

48 60 40 73 TPAi RS 2703 2996 3186 27,5 305

48 72 29 62 TPAi RS 2532 2885 3075 24 286

48 60 29 62 TPAi RS 2510 2804 2993 23 269

48 72 24 57 TPAi RS 2405 2757 2946 21,9 270

48 60 24 57 TPAi RS 2382 2675 2864 20,9 253

''D'' shaped Mediacom table, architectural base with 90° metal corners.

48 72 40 73 TPAD TS 2615 2945 3155 28,5 299

48 60 40 73 TPAD TS 2592 2871 3047 27,5 283

48 72 29 62 TPAD TS 2420 2750 2960 24 267

48 60 29 62 TPAD TS 2397 2675 2852 23 251

48 72 24 57 TPAD TS 2316 2646 2856 21,9 253

48 60 24 57 TPAD TS 2292 2572 2748 20,9 237

Tapered Mediacom table, architectural base with 90° metal corners.

48 72 40 73 TPAV TS 2615 2945 3155 28,5 299

48 60 40 73 TPAV TS 2592 2871 3047 27,5 283

48 72 29 62 TPAV TS 2420 2750 2960 24 267

48 60 29 62 TPAV TS 2397 2675 2852 23 251

48 72 24 57 TPAV TS 2316 2646 2856 21,9 253

48 60 24 57 TPAV TS 2292 2572 2748 20,9 237

NOTE : Finishing profiles used to conceal electrical cables and the monitor support are available on p.43.

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the panel and architectural base (Base finish), see p.15.

Metal : Specify the color of the metal components: Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Options Multi-outlet : Pivoting multi-outlet module option (M4) add $825 or Downtown Connection (M8) add $4939. See p.10-11.

1'' SURFACE 2" SURFACE

Price List

46

downtownPr

ivac

y Sc

reen

s

PRIVACY SCREENS - 70''H. and 58''H.

Upholstered screens, vertical or angled-top panels. Freestanding. See p.14.

The frame of the screen is a metal structure (1" thickness) and the exterior is upholstered in 3D mesh.

The width of the screen is limited to the fabric width.

Dimensions Code Price Specifications

A B Cu.Ft. lb

54 70 PAN 2138 35,5 54

48 70 PAN 2024 31,7 52

42 70 PAN 1954 27,9 50

36 70 PAN 1822 24,1 48

30 70 PAN 1672 20,3 46

54 58 PAN 1848 3,9 49

48 58 PAN 1769 3,5 47

42 58 PAN 1690 3,1 45

36 58 PAN 1610 2,6 43

30 58 PAN 1496 2,2 41

Specify Code : Consult the above product code list.

Mesh : Specify the color : Black (MS06), Sterling (MS26), Mocha (MS00), Pewter (MS16), Paprika (MS11).

Metal : Specify the color of the feet : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

BRACKET FOR PRIVACY SCREENS

Sold individually.

2½ 2½ FJS 55 0,1 1

Specify Code : Consult the above product code list.

Metal : Specify the color of the bracket : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Price List

47

downtownPrivacy Screens

SCREENS WITH SHELF

Freestanding screen with built-in shelf (for taking notes, etc). See p.14.

The frame of the screen is a metal structure (1" thickness) and the exterior is upholstered in 3D mesh.

The shelf is available in 1" thermally fused laminate (L1) or 1" high pressure laminate (S1).

The shelf is ½'' longer than the width of the screen.

The dimension of the shelf (1'' thickness) is the same as dimension (A), see below.

Use junction plates to join several screen with shelf together.

1'' Surface Dimensions Code T.F.L. H.P.L. Specifications

A B C L1 S1 Cu.Ft. lb

60 12 40 PAS 1936 2059 13,5 73

54 12 40 PAS 1901 2015 12,1 70

48 12 40 PAS 1861 1984 10,7 67

42 12 40 PAS 1800 1879 9,3 64

36 12 40 PAS 1632 1698 7,9 61

30 12 40 PAS 1584 1650 6,5 58

Specify Code : Consult the above product code list.

L1 / S1 : Specify the code identifying the type of finish and thickness of the surface (L1 or S1), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Mesh : Specify the color : Black (MS06), Sterling (MS26), Mocha (MS00), Pewter (MS16), Paprika (MS11).

Metal : Specify the color of the feet : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Price List

48

downtownM

obile

Pan

els

MOBILE PANELS - WHITE MARKER BOARD

The 2-sided mobile panel is comprised of a metal structure (3'' wide) on legs with casters. See p.13

Side 1 : high-gloss white marker board finish and an integrated accessory bar (anodized aluminum).

Side 2 : high-gloss white marker board finish full height.

Use dry erase marker only (not included).

Dimensions Code Price Specifications

A B Cu.Ft. lb

38 70 2327 7,8 134

Specify Code : Consult the above product code list.

Metal : Specify the color of the metal components : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

FrontSide 1

BackSide 2

Price List

49

downtownM

obile Panels

MOBILE COMMUNICATION PANEL

The 2-sided mobile panel is comprised of a metal structure (3'' wide) on legs with casters. See p.13.

Side 1 : fixed, available in laminate, monitor can be installed, integrated accessory bar (anodized aluminum)

Side 2 : removable (to facilitate cable management), available in laminate or high-gloss white marker board.

Metal shelf included 14''x36'' (for a DVD player or other electronics accessories).

Standard outlet and power bar are included.

A cable conduit is installed between the laminate sections and the metal shelf.

Shelf for use on the accessory bar is available, see below.

Dimensions Code Price Specifications

A B Cu.Ft. lb

Side 1 : laminate / Side 2 : laminate

38 70 1575 7,8 111

Side 1 : laminate / Side 2 : white marker board

38 70 1879 7,8 111

Specify Code : Consult the above product code list.

Side 1 : Specify the laminate finish (Side 1), see p.15.

Side 2 : Specify the laminate finish or the marker board (SBL), see p.15.

Metal : Specify the color of the metal components : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

SHELF

Laminate shelf attaches to the accessory bar of the mobile communication panel.

Edge band color matched to the shelf finish. Support with anodized aluminum finish included.

Dimensions Code Price Specifications

A B C Cu.Ft. lb

14 24 168 0,9 7

Specify Code : Consult the above product code list.

Base : Specify the color of the shelf (Base finish), see p.15.

FrontSide 1

BackSide 2

Laminate Laminate or white marker board

Price List

50

downtownM

obile

Pan

els

MOBILE PANEL WITH ''DOWNTOWN CONNECTION'' (linked communication system)

Mobile panel with ''Downtown Connection'' system. See p.12.

The 2-sided mobile panel is comprised of a metal structure (3'' wide) on legs with casters.

Available in 3 heights to match table heights of this collection.

Included with this panel : 1 linked communication system, 2 electrical outlets and one power bar.

Side 1

Top section : fixed, laminate.

Lower section : removable, laminate.

Side 2

Top section : removable, laminate or white marker board.

Lower section : fixed, metal.

Dimensions Code Price Specifications

A B Cu.Ft. lb

Side 1 : laminate / Side 2 : laminate

38 70 7827 7,8 119

38 59 7717 6,5 116

38 54 7657 6 108

Side 1 : laminate / Side 2 : white marker board

38 70 8074 7,8 119

38 59 7964 6,5 116

38 54 7905 6 108

Specify Code : Consult the above product code list.

Side 1 : Specify the laminate finish (side 1), see p.15.

Side 2 : Specify the laminate finish or the marker board (SBL) (side 2), see p.15.

Metal : Specify the color of the metal components : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

FrontSide 1

BackSide 2

Fixed, laminate Removable, laminate or white marker board

Removable, laminate Fixed, metal

Price List

51

downtownStorage

STORAGE

Open storage.

Shared access for the 24''x24'' storage units.

The storage top is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

Dimensions Code T.F.L. H.P.L. H.P.L. Specifications

A B C L1 S1 S2 Cu.Ft. lb

24 24 16¾ 519 568 644 7,4 54

12 24 16¾ 260 284 322 4 30

Open storage with one adjustable shelf. Additional shelves available, sold separately, see p.54.

Storage units 48'' and 60'' are equipped with a center support.

The storage top is available in 1" thermally fused laminate (L1), 1" high pressure laminate (S1) or 2" high pressure laminate (S2).

12 60 29 886 946 1041 15,6 108

12 48 29 708 757 833 12,6 90

12 30 29 443 473 520 8 58

12 24 29 354 378 417 6,5 49

Specify Code : Consult the above product code list.

L1 / S1 / S2 : Specify the code identifying the type of finish and thickness of the surface (L1, S1 or S2), see p.8.

Surface : Specify the color of the surface (Surface finish), see p.15.

Base : Specify the color of the base (Base finish), see p.15.

1'' SURFACE 2" SURFACE

Price List

52

downtownO

ccas

iona

l Tab

les

OCCASIONAL TABLES

Rectangular occasional table with metal tubular leg (2'' diam) and tripod base. See p.14.

Laminate surface (11/16'' thickness).

Dimensions Code Price Specifications

A B C Cu.Ft. lb

16 20 26 TAAK 432 6 14

''C'' shaped occasional table with metal base. See p.14.

Top and sides are in 1'' laminate.

Storage space (magazines, etc), interior width of 3".

16 13 26 TAAC 523 4,4 38

Specify Code : Consult the above product code list.

Surface : Specify the color of the laminate components (Surface finish), see p.15.

Metal : Specify the color of the metal base : Black (3067), Charcoal (3064), Silver (3090) or Polar White (3002).

Price List

53

downtownCom

plementary

Products

HOOK

Metal hook to be installed under a surface for hanging bags, umbrellas etc. See p.14.

Sold individually.

Dimensions Code Price Specifications

A B C Cu.Ft. lb

4.5 2.5 HKB 28 0,1 1

Specify Code : Consult the above product code list.

: Specifiy color of the metal hook : Black (3067), Charcoal (3064), Silver (3090), Polar White (3002)

CUSHIONS

Cushions available in 3 sizes. See p.14.

Dimensions Code Price Specifications

A B C C.O.M./GR1 GR2 GR3 GR4 GR5 Leather Cu.Ft. lb

12 18 CUSH 211 231 248 272 292 371 0,7 1

14 14 CUSH 205 221 234 253 268 353 0,6 1

12 12 CUSH 201 215 224 241 254 307 0,5 1

Specify Code : Consult the above product code list.

Fabric : Specify the fabric for the cushion, refer to Artopex fabric sample cards.

Price List

C.O.M. fabrics change from Grade 1 to Grade 2_May 15th, 2016

54

downtownCo

mpl

emen

tary

Pr

oduc

ts

EXTRA SHELVES FOR STORAGE UNITS

Extra shelves for open storage units 29''H .

Shelf is 1'' thick, laminate finish with matching edge band.

Dimensions Code Price Storage type Specifications

A B Cu.Ft. lb

11 28½ BKS 97 0,6 8

11 28 BKS 97 0,6 8

11 22½ BKS 97 0,5 6

11 22 BKS 97 0,5 6

EXTRA SHELVES FOR BISTRO TABLES WITH BUILT-IN STORAGE

Extras shelves for bistro tables (30''H and 41''H) with built-in storage (p.42)

Shelf is 1'' thick, laminate finish with matching edge band.

Dimensions Code Price Specifications

A B Cu.Ft. lb

14½ 12 BKS 86 0,3 4

Specify Code : Consult the above product code list.

Base : Specify the color of the shelf (Base finish), see p.15.

Price List

55

downtownCom

plementary

Products

GANGING BRACKET FOR SEATING

Bracket in 2 parts - male-female.

Black only.

Code Price Specifications

Cu.Ft. lb

Ganging bracket AC-FJD 50 0,1 2

CABLE FASTENERS

Cable fasteners, attach under the seating.

Shipped in packages of 5, hardware included.

Black finish.

Fastener AC-EWF1 19 0,1 1

STIFFENER

Stiffener, recommended for tables 54'' or more with tubular legs.

Harware included.

Charcoal finish.

AC-RSTi64 83 For surface 72'' long 0,5 5

AC-RSTi52 77 For surfaces 60'' and 66'' long 0,5 4

AC-RSTi46 72 For surface 54'' long 0,5 3

JUNCTION PLATES

Metal junction plates, Black finish.

Used to join 2 surfaces side-by-side.

Pack of 2 AC-FJP 20

Price List

downtown

56

Prices and Payment

All prices shown in this price list are suggested retail prices and are subject to change without notice. Prices do not include installation and shipping costs. Taxes are extra. These prices are guaranteed for 30 days from the date

acceptance of the order. Orders are invoiced at the time of shipment. Terms of payment are net 30 days from date of invoice. Any products sold by Artopex shall remain its property until fully paid in cash. In the event that the purchaser defaults in the payment of any sum due to

condition becomes unsatisfactory to Artopex, Artopex reserves the right upon notice to the purchaser, to differ or discontinue shipment of any goods or, to refuse any order until time as the default is corrected or the purchaser provides assurance of payment to Artopex.

Orders

Artopex requires that all orders be submitted in writing to avoid errors and/or duplication. The purchaser is responsible to submit complete

colors missing…) will be processed upon reception of the complete information and normal production lead-time will be applied from the date that the complete information is received.

Acknowledgments

Orders will be acknowledged with Artopex acknowledgement forms governing the transaction. The details appearing on this acknowledgment will describe the items to be shipped to the purchaser and the ready to ship date (not the actual shipping date). It is the purchaser’s responsibility to verify that the acknowledgment information is correct. If not, the purchaser must notify Artopex within 48 hours in writing. Failure to provide corrections within 48 hours could be subject to extra charges (see Changes and Cancellation).

Changes and Cancellations

Order cancellations or changes are subject to acceptance by Artopex. Special order items and fabric-covered items (standard or COM fabrics) already in production are not subject to change or cancellation under any circumstances.

surcharge. Changes to the shipping date must be taken into consideration.

invoice the purchaser for any items already in production at the cancellation date and for lost

Storage

Artopex reserves the right to invoice the

Shipping

A) Prices are F.O.B. factory, collect.B) Artopex will choose the carrier unless

will be handed over to the common carrier in good condition; Artopex liability ceases at this point. Shipping will be done at the purchaser’s unloading dock. The purchaser should have an unloading dock able to accommodate 53’ trailers and must supply the unloading personnel.

damage that occurs in transit or in storage. It is the purchaser’s responsibility to examine

the carrier. Failure to provide an adequate description of the lost items or damages to the carrier could result in the carrier refusal to honor the charges. It is the purchaser’s responsibility to obtain information on the carrier’s claim policies and to send any claims to the carrier. For other policies, contact Customer Service.

any claims even if the order has been shipped directly to the client.

Return of Goods

A) No merchandise may be returned without Artopex written consent and shipping instructions. If this procedure is not followed, the merchandise will not be accepted by the factory and will be reshipped collect without further notice.

and all boxes must be clearly marked with the authorization number.C) Returns of items authorized by Artopex are subject to a charge of 25% plus freight (and customs, if applicable) and repair costs.

Artopex reserves the right to modify the

accessories without notice. Artopex also reserves the right to cease production of any product at any time. The

as described in the price list prevail over the content of brochures or folders. The weights and volumes shown on the price lists include packaging and are approximations.

Noki Lock

Mechanism warranted for 10 years. Industrial and patent pending designs.

Artopex Lifetime Warranty

Artopex warrants its products are free of defects in design, material and workmanship for as long as the original purchaser owns them.

If written notice of the defect is given to Artopex within the applicable warranty period, Artopex will repair or replace with comparable product, at Artopex’s choice, without charge to the original purchaser, any part or product shipped after July 1, 2001, which fails under normal use as a result of such defect.

This warranty provides limits on the following products :

for (10) ten years from date of delivery,

of delivery,

foam, wood framed seating products, stacking chairs, glides, slides, casters, user-adjustable worksurface mechanisms, which are warranted

of delivery,

for (1) one year from date of delivery.

This warranty does not extend to:

applied to Artopex products,

not been installed or used according to Artopex application and installation guidelines.

of years of single shift usage, the warranty period will be reduced in a pro-rata manner when the products are used in a manner that exceeds the equivalent of a single shift forty (40) hour work week.

This warranty is the Customer’s sole remedy for product defect. This warranty does not cover damage by a carrier in transit. Artopex makes no warranties, including the implied warranties

purpose, other than the expressed warranties contained herein. There are no other warranties express or implied. Artopex shall not be liable for consequential or incidental damages arising from any product defect.

Conditions & Guarantees

Conditions & Guarantees

PRIN

TED

IN C

ANAD

A

© A

RTO

PEX

INC.

LT

502-

U-0

514

Designing, manufacturing, advising, planning

and supporting: that’s the art that

distinguishes our purpose at Artopex.

Tel. : 9810.873.054 0403.363.008 1

Fax. : 450.378.9712

HEAD OFFICE 800, Vadnais Street Granby, QuebecJ2J 1A7CANADA

artopex.com