low visual impact antennas - cs-h1.net visual impact antennas.pdf · growing visual pollution, and...
TRANSCRIPT
Low Visual Impact Antennas
Over the past 20 years, the mobile telecom industry experienced amassive growth, leading a lot of mobile operators to intensivelydeploy their infrastructures. This led, at the same time, to agrowing visual pollution, and a high visual impact, especially inurban areas (with towers, cables, antennas etc..).
This situation made authorities and consumers react, and makes it more difficult than ever for mobile operators to expand their mobile coverage and find a site for their antennas.
This is where solutions for cell sites integration became very useful for mobile operators. Integrate and disguise telecom infrastructures in harmony with the landscape is the best way to combine a necessary mobile coverage with a clean environment.
The Kathrein Group, worldwide leading manufacturerin base station antennas, had already taken this newpriority into consideration, by developing a specialrange of low visual impact antennes (LVIA) for itscustomers.
Allowing site-sharing to mobile operators, this newtype of integrated solution is a standard base stationpanel antennas integrated in a cylindrical radomewith a common internal structure, called pipeantennas.
With every feature of a good support for base station antennas, it immediately bringsto mobile phone users the benefit of making phone calls, without being exposed tothe negative side of it (visual pollution).
Low visual impact
� Mono-, Bi-, and Tri-Sector: from 1 to 3 panel antennas in the same tube (cylindrical radome)
� 3 different diameters: 330mm, 350mm & 522mm
� Individual azimuth adjustment: per sector from ±10° to ±20°
� Mast weight: 37kg
� All kind of technology: single/dual/triple/quad-band, broadband, Ultra-Broadband, side-by-side, & double broadband antennas for LTE800/GSM900/UMTS900/DCS1800/LTE1800/UMTS2100/LTE 2.6
� Easy access door to Service Area for tilt setting and RCU, DTMAs, combiners installation
� Extended Tilt Range
� Feeder entrance hatch for optimal installation
Technical features
320/350/522 mm
1.5m, 2 m or 2.5 m
� Low cost & easy installation� Easily integrated into the environment� Light, low sized � Turn key solution with:
� Bending hinge� Azimuth Adjustment
Customer benefits
Modular System
Service Area
Antennas inside
Tilt Adjustment
For:
- Antenna Systems Housing(RCUs, DTMAs, Combiners ..)- Jumpers
Service Area
Folding HingeSet Up
Gross Azimuth Setting
Christian HARELGeneral [email protected]
Guillaume CapetteExport [email protected]
Christophe BouchetArea Sales Manager – North [email protected]
Contacts