low capacity digital bench bases...bso low capacity digital bench bases technical specifi cation...
TRANSCRIPT
The 2 lb and 10 lb (1kg and 5kg) BSQ is a high resolution, digital bench base with up to 1 billion internal count resolution, a readability of over 2.5 million divisions. This robust digital bench base features some of the very latest, state of the art suspended Quartzell technology, guaranteeing repeatable balance accuracy at all times.
A rugged die-cast, clamshell case provides outstanding protection to the internally mounted Quartzell transducer. Its specially designed suspension system protects the Quartzell transducer from damage and off ers up to 1100% overload protection.
Weighing in oily environments
Features built-in drip pathways to help channel all unwanted dirt and cutting fl uids away from critical areas within the base.
Optional draft shield
A draft shield option allows increased accuracy when weighing minute items.
Optional underhook
A quick-fi t underhook enables items to be suspended under the bench base, for density weighing applications.
SPECIFICATIONSGENERAL
Indicator Compatibility ZM400 series indicators
Connectivity Base connection to the indicator can be achieved by either RS232 to indicator or PC terminal (for custom applicationsoftware only). 1 x RS232 (via a Keyed RJ45 socket).1 x USB VCP
Base Communication Count Data (SMA , 115200, 8 data bits, none, 1 stop bit) or PC terminal
Allowable Cable Length RS232 up to 50 ft (15 M) USB up to 10 ft (3 M)
Power Base is powered from the indicator
Base Size & Max Capacity From 0.2 lb to 2 lb (100 g to 1000 g) 9” x 12” (230 mm x 305 mm) base housing with a 6” (156 mm) dia. weight platterFrom 1 lb to 10 lb (500 g to 5000 g) 9” x 12” (230 mm x 305 mm) base housing with a 6” (156 mm) dia. weight platter
Displayed Resolution Can resolve up to 10,000,000 divisions
Legal for Trade Resolution 2 lb (1 kg) base: 10,000 divisions single range with a min 0.00002 lb / 0.1 g (not OIML approved)10 lb (5 kg) base: 10,000 divisions 3 range with a min 0.00002 lb / 0.1 g
Non Legal for Trade Resolution
100,000 divisions center of pan, stable room temperature
Readability 2 lb (1 kg) base: up to 1: 2,000,000 divisions 10 lb (5 kg) base: up to 1: 2,500,000 divisions
Internal Resolution 1 billion counts (1,000,000,000 counts)
Filter Setting Controlled within the ZM indicator
High resolution, robust bench bases designed to give balance
accuracy within an industrial environment.
Technical Specifi cation
BSOLOW CAPACITY DIGITAL
BENCH BASES
DESCRIPTION
BSO LOW CAPACITY DIGITAL BENCH BASES Technical Specifi cation
GENERAL
Creep 0.001% of 100,000 divisions over a 30 minute time span or 0.0005% of 200,000 divisions over a 5 minute time span
Minimum Recommended Non Veri� able Division Size
0.000001 lb (0.0005 g) for the 2 lb (1kg) BSQ base0.000005 lb (0.002 g) for the 10 lb (5kg) BSQ base
Minimum Allowed Veri� able Division Size (Class III)
0.0002 lb (0.1 g) for the 2 lb (1kg) BSQ base (10,000d approved) single range 0.0002 lb (0.1 g) for the 10 lb (5kg) BSQ base (10,000d approved) 3 multi range
Metrology Data Stored within the indicator
Base Construction Robust die-cast clamshell base design with a centrally positioned suspended digital QDT cell with built-in anti-shock fl ex suspension, 4 adjustable anti-slip feet and a lipped stainless steel weigh platter
Loadcell Technology High accuracy digital Quartzell transducer
Overload Protection 1100% overload protection based off the 10 lb (5kg) construction
Operating Temperature 41° F to 104° F / +5° C to 40° C (approvals) at 10 to 90% humidity-4° F to 140° F / -20° C to 60° C (industrial) at 10 to 90% humidity
Foot Adjustment Hard wearing anti-slip rubber foot with fi nger grip locking ring to allow up to 0.75” (19 mm) height adjustment
IP Rating Designed to meet IP42
Carry Handles Carry handles allow this scale base to be easily moved
DIMENSIONS (inches)
Base Size a b c d e f g h k l m n o
9” x 12” 13.50 10.00 9.50 7.00 5.58 4.85 15.70 15.00 8.70 1.61 6.25 5.50 0.75 5.50 8.20 7.45 6
DIMENSIONS (millimeters)
Base Size a b c d e f g h k l m n o
230mm x 305mm 343 254 241 241 178 123 399 381 221 41 159 140 19 140 208 189 152
Max Min Max Min Max Min Max Min
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
N/A
BSQ 9 x 12 BASE ONLY
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_BASE_KIT
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
9.5113.33
6.255.52 5.58
4.85
12.24
9.24
10.00
1.61 1.29.55
6.50
Max Min Max Min Max Min Max Min
OPTIONS
Draft Shield 2-10 lb (1-5 kg), allows access from all 4 sides
Underhook Only available on the 2 -10 lb (1-5 kg) versions
Base Column 15” or 23” high ZM indicator to BSQ base column
APPROVALS
Agencies NTEP (US) Class III/IIIL 10,000 d (CC# 15-028)Measurement Canada (AM-5985)OIML (European and UK) Class III 10,000 *EC*UL/c-UL-US*Pending
MeasurementCanada Approved
AM-5985
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
N/A
BSQ 9 x 12 BASE ONLY
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_BASE_KIT
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
9.5113.33
6.255.52 5.58
4.85
12.24
9.24
10.00
1.61 1.29.55
6.50
6.08
c
d
e
a
b
h
k
o
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
n/a
BSQ 9 x 12 DRAFT SHIELD
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_draft shield assembly
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
8.7011.70
9.5113.33
15.7014.97
5.584.85
12.24
9.24
10.00
1.61 1.29.55
6.50
c
d
g
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
n/a
BSQ 9 x 12 BASE HOOK KIT
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_base_hook_kit
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
9.51
13.33
6.255.52 5.58
4.85
12.24
9.24
10.00
1.61 1.29.55
6.50
8.197.46
5.50
.75
.50
1.75
6.50
.50
MINIMUM RECOMMENDEDCUT-OUT
k
I
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
n/a
BSQ 9 x 12 BASE HOOK KIT
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_base_hook_kit
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
9.51
13.33
6.255.52 5.58
4.85
12.24
9.24
10.00
1.61 1.29.55
6.50
8.197.46
5.50
.75
.50
1.75
6.50
.50
MINIMUM RECOMMENDEDCUT-OUT
m
n
12345678
A
B
C
D
A
B
C
D
12345678
SCALE SHEET
SIZE DWG. NO. ISSUE
FINISHMATERIAL
APPROVALS DATE
DRAWN
CHECK
MECH ENG
ELEC ENG
2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005
INT.CLASS
2B
EXT.CLASS
2A
©2016 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
THIRD ANGLE PROJECTION
1 OF 1
n/a
BSQ 9 x 12 DRAFT SHIELD
.03
.0101 DEG.
Greg Abel 10-May-16
PN AWT15-501527_draft shield assembly
D
UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DO NOT SCALE DRAWING
REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA
DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR
10-May-16
7.00
8.7011.70
9.5113.33
15.7014.97
5.584.85
12.24
9.24
10.00
1.61 1.29.55
6.50
a
f
b
e
h
d
DRAFT SHIELD OPTION
UNDERHOOK OPTION
BSO LOW CAPACITY DIGITAL BENCH BASES Technical Specification
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
www.averyweigh-tronix.comAvery Weigh-Tronix is an ITW company
BSQ_1kg_5kg_spec_501587.indd V2 AWT35-501587