locks & lock systems - hardware imagination & lock systems 336 operation key removable in...

19
LOCKS & LOCK SYSTEMS 336 Operation Key removable in both locked and unlocked postions Keying Will key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes) Packaging Supplied with two keys and mounting screws CAM Lock Drawer Lock National Cylinder Max Material Finish Keyed Alike Key No. for Keyed Part No. Length Thickness Order No. Keyed Alike Different 8054-14A 15/16” 5/8” Nickel 39-102 413A 39-104 8053-3 1-3/16” 7/8” Pol Brass 39-106 413A 39-108 8053-14A 1-3/16” 7/8” Nickel 39-110 413A 39-112 8055-14A 1-3/16” 7/8” Nickel 39-118 413A 39-120 8053-14A 1-3/16” 7/8” Nickel 39-200 415A NS 8053-14A 1-3/16” 7/8” Nickel 39-202 390A NS 8053-14A 1-3/16” 7/8” Nickel 39-204 346A NS 8053-14A 1-3/16” 7/8” Nickel 39-206 420A NS 8053-14A 1-3/16” 7/8” Nickel 39-208 642A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-270 415A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-272 390A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-274 346A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-276 420A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-278 642A NS 8060-14A 1-3/4” 1-7/16” Nickel 39-280 413A 39-282 Order Information All locks flush or lipped mounting, 25 per case. National Cylinder Dead Bolt Finish Keyed Alike Keyed Part No. Length Travel Order No. Different 8703-3 15/16” 11/32” Pol Brass 39-122 39-124 8703-14A 15/16” 11/32” Nickel 39-126 39-128 8705-3 1-3/16” 11/32” Pol Brass 39-134 NS 8705-14A 1-3/16” 11/32” Nickel 39-136 39-138 Order Information Locks use key 413A and are packaged 25/case. Application For drawers, R.H. or L.H. doors with either lipped or flush construction Operation 90° Cam turn – key removable in both locked and unlocked postions Keying Will key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes) Packaging Supplied with two keys, trim washer, spur washer for wood and two cams to accommodate construction needs. MOUNTING HOLE FOR ALL LOCKS Master Keyed x Keyed Different 8053 Nickel 39-180 MASTER KEY Order Number 39-182 ALL LOCKS ON THIS PAGE CAN BE MASTER KEYED SPECIAL ORDER

Upload: dangngoc

Post on 27-May-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

LOCKS & LOCK SYSTEMS

336

OperationKey removable in both locked and unlocked postions

KeyingWill key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes)

PackagingSupplied with two keys and mounting screws

CAM Lock

Drawer Lock

National Cylinder Max Material Finish Keyed Alike Key No. for Keyed Part No. Length Thickness Order No. Keyed Alike Different 8054-14A 15/16” 5/8” Nickel 39-102 413A 39-104 8053-3 1-3/16” 7/8” Pol Brass 39-106 413A 39-108 8053-14A 1-3/16” 7/8” Nickel 39-110 413A 39-112 8055-14A 1-3/16” 7/8” Nickel 39-118 413A 39-120 8053-14A 1-3/16” 7/8” Nickel 39-200 415A NS 8053-14A 1-3/16” 7/8” Nickel 39-202 390A NS 8053-14A 1-3/16” 7/8” Nickel 39-204 346A NS 8053-14A 1-3/16” 7/8” Nickel 39-206 420A NS 8053-14A 1-3/16” 7/8” Nickel 39-208 642A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-270 415A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-272 390A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-274 346A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-276 420A NS 8055-14A 1-7/16” 1-1/8” Nickel 39-278 642A NS 8060-14A 1-3/4” 1-7/16” Nickel 39-280 413A 39-282

Order InformationAll locks flush or lipped mounting, 25 per case.

National Cylinder Dead Bolt Finish Keyed Alike Keyed Part No. Length Travel Order No. Different 8703-3 15/16” 11/32” Pol Brass 39-122 39-124 8703-14A 15/16” 11/32” Nickel 39-126 39-128 8705-3 1-3/16” 11/32” Pol Brass 39-134 NS 8705-14A 1-3/16” 11/32” Nickel 39-136 39-138

Order InformationLocks use key 413A and are packaged 25/case.

ApplicationFor drawers, R.H. or L.H. doors with either lipped or flush construction

Operation90° Cam turn – key removable in both locked and unlocked postions

KeyingWill key together with all other C8000 and C8700 series cabinet locks shown in this catalog. Available keyed alike (6 key codes) except C8053 (polished brass) which has only 3 codes available. Keyed different (200 changes) and masterkeyed different E41A (200 changes)

PackagingSupplied with two keys, trim washer, spur washer for wood and two cams to accommodate construction needs.

MOUNTING HOLEFOR ALL LOCKS

Master Keyed x Keyed Different8053 Nickel 39-180

MASTER KEY Order Number 39-182

ALL LOCKS ON THIS PAGE CAN BE MASTER KEYED SPECIAL ORDER

LOCKS & LOCK SYSTEMS

337

Push Lock

Strike Plates

Timberline Accessories

Features•Pushlockforwoodslidingdoorsup

to 1” thick•Pushingincylinderlocksdoors•Keyremovableinbothlockedand

unlocked positions

C8043

ORDER NUMBERSBright Brass - KA ....... 39-254Bright Brass - KD ....... 39-256Dull Chrome - KA ....... 39-250Dull Chrome - KD ....... 39-252

KA = Key number 413A

ORDER NUMBER

Nickel ..............39-194

ORDERNUMBER

39-340

ORDERNUMBER

39-344ORDER

NUMBER

39-350

ORDER NUMBER

C7005 3” Straight Cam ..... 39-172

ZChange Tool 16.5mm Drill Bit Spacer for 5/8” Panel

KY-500 DB-165 SP-300

Required to remove lock plugs in cylinder bodies

Drills the proper diameter hole for most cylinder bodies

Allows CAM lock cylinder bodies to be used in 5/8” thick panels

10 mm shankdiameter

LOCKS & LOCK SYSTEMS

338

Timberline Removable Lock Plug System

Adjustable Pin Installation Tool

ORDERNUMBER

39-342

TL-100

Used to install adjustable pins and rotate cylinder bodies

ANY LOCK PLUG SNAPS INTO CYLINDER BODY

Lock Plug + Cylinder Body = Assembled Lock

Complete Key Versatility•InPlant...furniturecanbekeyed easily to the customer’s requirements at any time•InField...keynumberscanbereadily changed by your customer

Ease of Finishing•Furnituremaybefinishedwithoutlock plug installed, eliminating need for masking

Simplified Inventory Management•Onestockoflockplugsfulfillsalllocking requirements

LOCK PLUGS39-300 – LP100 Nickel KA100T39-302 – LP500 Brass KA100T39-304 – LP700 Satin Nickel KA100T39-320 – LP100 Nickel KD

Most of the merchandise in this catalog is available in all Hardware Imagination locations. If your selection isn’t available at the store nearest you, we’ll gladly order it from one of the other stores or through special order.

39-400 39-40239-404

39-406

39-408

LOCKS & LOCK SYSTEMS

339

Timberline System 100

Timberline System 150

ORDERNUMBER

Complete Set39-330*

ORDERNUMBER

Complete Set39-328*

LOCK PLUGS39-300 – LP100 Nickel KA100T39-302 – LP500 Brass KA100T39-304 – LP700 Satin Nickel KA100T39-320 – LP100 Nickel KD

Type 100 cylinder body

Type 100 lockbar clip

Type 150 cylinder body

Type 150 lockbar clip

Lockbar retainer

Drawer locking clipAdjustablePin

Lockbar retainer

Drawer locking clip

AdjustablePin

11/16” min.

16.5 mmdia. hole

1-1/4”

1/2”5/32” min.

11/16” min.

16.5 mmdia. hole

1” min.

1-1/4”

1/2”5/32” min.

1-5/8”

Lockbar 24” standard or cut to size

Lockbar 24” standard or cut to size

Typical Installation Details

Typical Installation DetailsFeatures•Full1/2”lockbarthrow•Fitswithin1/2”drawerslide

clearance•Minimalmachiningrequired - hole for lock - groove for lockbar

* Sold in sets ONLY

* Sold in sets ONLY

LOCKS & LOCK SYSTEMS

340

Disc Tumbler 3 Drawer Gang Lock

Metal Hanging File BracketsDescription•Reducesmanufacturingcosts–quicktoinstall•Flexible–caneasilybemovedtoaccommodatelegalorlettersizefiles

•Strong–16gaugesteelwillholdtheheaviestfiles•Attractive–zincplatedfinish

Brackets can be used for side-to-side orfront-to-backfiling.

Clip25-410

Bar MountFits 1/2” material

25-414

Top Mount25-418

Bar 1/2” X 1/8” X 96”25-412

Face MountFits 1/8” material

25-416

ApplicationFor locking drawers in desk pedestals and other multiple drawer applications. Requires 7/8” dia. hole for cylinder and dado for bar, measuring 7/8” x 1/8” deep on inside of panel.

OperationKey removable in both locked and unlocked postions. Turning the key locks all drawers simultaneously (drawers must be in closed position). Bar moves studs into notch in drawer or slide, thus preventing drawer movement.

KeyingWill key together with all other disc tumbler locks using D6785 key blank. See table for available keying. Masterkeying to E41A

PackagingSupplied with two keys, three locking studs, three stud slides, saddle and mounting screws.

Saddle reverses for mortise application

Cylinder is located near top of pedestal

ORDERNUMBER

Nickel FinishKA-413A ............... 39-168KD ........................ 39-170

LOCKS & LOCK SYSTEMS

341

DualAxess by CompX Security Products- an innovative combination cam lock with key override.

DualAxesscanberetrofitforexistingwoodormetalapplications to give keyless access and to eliminate keys.The lock can be mounted vertically or horizontally on flush, overlay or lipped/overlay applications. Attach the camfor 90° latching in any direction, based on individual application needs.

To change the combination, the current combination and a valid key is needed. 10,000 possible combinations- any four digit number - are available.

DualAxess by CompX can be operated using either a combination or a key. Once unlocked, rotate the housing90° clockwise to unlatch.

Unlock using combination:.. Factory set combination is 0-0-0-0.

.. Turn wheels until correct combination appears in the combination windows.

..Pressbutton,rotatehousingtounlatch.

.. Scramble wheels to lock.

Security Locks

Unlock using key:.. Insert key into lock plug; rotate key 90° clockwise.

.. Rotate housing to unlatch.

.. Important: Rotate key 90° counterclockwise to lock.

*Special Order*

LOCKS & LOCK SYSTEMS

342

Security LocksWIRELESS or ETHERNET READY

Access Control Features: •Easy Installation On Existing Or New Cabinets

•3,000 User/Supervisor Codes

•FourModesOfAccess:Keypad,ProximityCard*HidOrIclassHid,Magstripe Card* (Track 2)

*UseExistingIdentificationCards

•Motor-DrivenLatchingMechanismProvidesTheConvenienceOfAutomaticRelocking

•Elock Is Capable Of Operating Two Latches Or Doors

•OperatesOn6AaAlkalineBatteriesOrDedicatedPowerSupply

•Low Battery Indicator

•“JumpStart”9-VoltBatteryPowerPortAllowsTheUser,WithAValidCredential, To Access The Compx Elock® When The Batteries Are Exhausted

•ProgrammingCanBeDoneManuallyOnUser-FriendlyLcdBlueBacklitScreen Or Through Lockview® Software

•Compatible With 12-Volt Electric Door Strikes To Control Access On Interior Doors

•OptionalDoorSwitchProvidesInstantNotificationOfUnauthorizedEntryOrDoor Ajar Alerts

Network features: •Utilizes 802.11g wireless protocol or Ethernet communication on existing networks

•Enablestwo-waycommunicationviacommonsecurityencryptionmethods:WEP64-key,WEP128-key,WPA-PSK(TKIP),WPA2-PSK(AES)andotherenterprise-classwirelesssecurity

Lockview®

Software Features: •ProvidesAComprehensiveAuditTrailOfTheLast15,000AccessAttempts;IncludingDate,TimeAndUserName

•EscalatingNotificationSystemSendsAlertsViaEmail;OptionalShortMessageServiceProvidesTextMessage,VoiceMessagingOrFaxAlerts

•CompliesWithJointCommissionStandardsAndIs21CfrPart11Compliant

•ComplianceDashboardProvidesAt-A-GlanceStatusOfAllElocksOnTheNetwork

•LockviewEnablesUpdatesViaTheNetworkToAnyElockOnTheSystem.UPdatesCanInclude:•User Changes (Add / Delete / Modify Credentials) •Elock Changes (Add / Delete / Modify Elocks)

•Access Rights Changes Minimum System Requirements MssqlServer2005OrMssqlServerExpress,2gbMemory,2gbFreeSpaceOnHardDisk,AndWindowsXp,Vista,Or7.OtherConfigurationsAreAcceptable;PleaseConsultFactoryForDetailedInformation.

LockView® software features:w Provides a comprehensive audit trail of the last

15,000 access attempts; including date, time and user name

w Escalating notification system sends alerts via email; optional Short Message Service provides Text Message, Voice Messaging or Fax alerts

w Complies with Joint Commission standards and is 21 CFR Part 11 compliant

w Compliance Dashboard provides at-a-glance status of all eLocks on the network

w LockView enables updates via the network to any eLock on the system. Updates can include:

— User changes (Add / Delete / Modify Credentials) — eLock Changes (Add / Delete / Modify eLocks) — Access Rights changes

Minimum System RequirementsMSSQL Server 2005 or MSSQL Server Express, 2GB memory, 2GB free space on hard disk, and Windows XP, VISTA, or 7. Other configurations are acceptable; please consult factory for detailed information.

Reorder #: F2644-029 For more information, call 847.752.2500 Copyright 2011 © CompX Security Products / 847.752.2500 / compx.com / 715 Center St., Grayslake, IL 60030Any companies and/or products referred to herein are marks or registered trademarks of their respective companies, owners and/or mark holders.

Network cabinet eLock has three components:Controller Motorized gear-driven latch Battery compartment

LockView 4 is easy to use, with many programmable options, and allows access to any eLock from any computer on the network.

SOFTWARE

Exterior mountInterior mount

*Special Order*

LOCKS & LOCK SYSTEMS

343

File Frame Facts

File Frame Systems – Typical Configurations

File Frame Systems – Special Applications

1-1/4”

RECOMMENDED MINIMUM FILE TAB

CLEARANCE

LETTER FILES

FILE FRAME SYSTEM CAN PROVIDE PERFECT FILING WITHIN THESE DIMENSIONS

LEGAL FILES

8-3/4” 8-3/4”

3/4” 3/4”

12-1/8” to 12-3/16”

11-3/16” to 13-3/16”

15-1/8” to 15-3/16”

14-13/16” to 16-3/16”

RecommeNded INSIde dRAWeR

HeIGHT

PRoFILe HeIGHT

FOUR SIDED DRAWER

LATERAL FILE DRAWER WITH SIDE

TO SIDE FILING

LATERAL FILE DRAWER

METAL DRAWER – LETTER WIDTH

FILES

METAL DRAWER – LEGAL WIDTH

FILES

PLAINDRAWERSYSTEMS

LETTER OR LEGAL FILING

WIDE FILE DRAWER

FILE DRAWERWIDEANDDEEP

FILE DRAWER

THREE SIDED DRAWER

ORDER NUMBER

Letter width files ..... 39-290Legal width files ..... 39-292

KITSSUPPLIEDWITHTHECOMPONENTSNEEDED TO OFFER

FRONT-TO-BACK AND SIDE-TO-SIDE FILING

FITS DRAWERS WITH INSIDEDEPTHLESS

THAN 23”

CUT-TO-SIZE KITS

LOCKS & LOCK SYSTEMS

344

Glass Door Locks Bore Through Style Locks

Compression Mount Style Locks

Glass Cylinder Lock

E-8-P222

LAMP

E110I1A

TYPE 300 SERIES – Horizontal Mount

TYPE 350 SERIES – Horizontal Mount

7/8” DIAMETER HOLE BORED IN GLASS CENTERED 7/8”

FROM EDGE

NUT WASHER IS HAND TIGHTENED TO

FASTEN CYLINDER BODY TO GLASS

CAM MUST ROTATE

COUNTER-CLOCKWISE

TO LOCK

FINISHCAPISATTACHED TO GIVE FINISHED APPEARANCE

ORDER NUMBERS

Nickel Finish39-306

Brass Finish39-308

Satin Nickel Finish39-310

Nickel Finish39-294

Brass Finish39-296

Satin Nickel Finish39-298

3/16”15/16”

1-1/4”

1-3/16”

1-5/8”

LOCK PLUGS39-300 – LP100 Nickel KA100T39-302 – LP500 Brass KA100T39-304 – LP700 Satin Nickel KA100T39-320 – LP100 Nickel KD

NO BORING REQUIREDLOCKSLIPSInto EDGE OF GLASS

DOOR AT ANY LOCATION

1-5/8”

1/2”Ø 7/8”

1-3/16”

5/16”

7/16”

1-1/8”

Features•Fullycushionedto

avoid glass damage•Glassdoors1/4”to

5/16” thick

Features•Chromeonbrasscylinder•KeyworksasKnobinunlockedposition•Angleoflocked&unlockedis90°•Settingholediameter:

18.5 mm (23/32”)•Maximumdoorthickness:

7mm (9/32”)

Features•Forswingstyle

doors•Glassdoorsupto

3/8” thick

ORDER NUMBERS

Polished stainless steel front plate ...... 39-176Polished brass front plate .................. 39-178

Casters

345

Casters

Features•Hoodedballformore

decorative applications•Non-markingPVCball•100lb.capacitypercaster•Wheelsize2”–

total height 2-5/8”•Standardtopplate

1-3/16” x 2”

Features•Dual wheel hooded caster•2”diameterwheels•Rated45lbs.percaster•Plateincluded

Features•75mmnon-hoodedblack

twin-wheel caster•1-1/2”squaretopplate•135lb.loadcapacityper

caster

Features•75mmnon-hoodedblack

twin-wheel caster•Locksinplace•65mmx55mmtopplate•Polyurethanewheelsandbrakes•135lb.loadcapacitypercaster

Features•Single,4”x7/8”,rubberwheel•Rigid–non-swivelcaster•Overallheight4-3/4”•2-3/4”x3-3/4”topplate•150lb.loadcapacitypercaster

Features•Single,5”x1-1/4”,

rubber wheel•Lockingswivelcaster•Overallheight6”•SwivelRadius3-5/8”•3-1/8”x4-3/16”topplate•300lb.loadcapacitypercaster

ORDER NUMBERS

Polished Brass ......... 23-120 Polished Chrome ...... 23-122

ORDER NUMBERS

Black / locking .......... 23-128Brass / Black ............. 23-130Chrome / Black ......... 23-132Black Texture ............ 23-134

ORDER NUMBER ............... 23-158

ORDER NUMBER ............... 23-160 ORDER NUMBER ............... 23-162

ORDER NUMBER ............... 23-156

SOLD PER PIECESOLD

PER PIECE

SOLD PER PIECE

SOLD PER PIECE

SOLD PER PIECE

SOLD PER PIECE

CATCHES, LATCHES & BRACKETS

346

Catches & Latches

Flexa Touch® Drawer Touch Latch

This unique drawer opener works like a ball point pen. Pressforwardabout1/8”anditsprings open. Excellent for large or small drawers. Aproximate 2-1/2” clearance is required behind drawer.

• Madeofresin-rustproof• Proveninteststolast...

more than 300,000 times• Catch&Strikemadeof

polyacetal (natural white)• Rollersmadeof

polyethylene (natural white)• Packaged:5sets

• Strong,permanentmagnet• 40mmholeC/C• Floatinghead• Comeswithstrikeplate• Adjustableholes• 8lb.Pullingcapacity

Order number ........ 17-122

Mounted throughback of drawer

Mounted onback of drawer

Rotary Catch

Magnetic Catch

White ....................... 17-156Brown (not shown) .... 17-158

White ....................... 17-112Black (not shown) ..... 17-152

Rustproof catch ideal for bathroom and kitchen cabinets.

5 sets per pack

CATCHES, LATCHES & BRACKETS

347

• Magneticforce= 1.5kg (3.3 lbs.)

• Weight=28.5g• Box=24pcs.• Carton=720boxes

K-Catch

Super 88 Magnetic Catch

Super Strong Nylon Catch

Order number ........ 19-250

5 sets per pack

25

46(1-13/16")

15(1

9/32

")

1

28 1.6

16

1

2

3

27

16 21

4 ¥ 8

36

4

f4.2, f6

• Material:Catchhousing-aluminum Strike - Steel

• Finish:Strike-clearzincchromate• Screwsnotincluded

Order number ........ 17-114

SP Series Magnetic Catch

ML-80 Series Magnetic Touch Latch

SP single plate ....... 17-116 • Material: CatchHousing–Polyamide Strike – 430 Stainless Steel• Finish: White

Screws not included

ML-80 Brown .......... 17-154ML-80 Black ........... 17-155ML-80 White ........... 17-164

• MagneticForce:1.6kg(3.5lbs)• Pakaged: 20pcs.perbox 400 pcs. per carton• Material: body–ABSPlastic latch – Steel counterplate – Steel• Finish: body–white,brownorblack latch – Yellow Zinc Chromate counterplate – Yellow Zinc Chromate

CATCHES, LATCHES & BRACKETS

348

Catches & BoltsEPCO Solid Brass Double Roller Ball Catch EPCO Elbo Catch

KV Bullet Catch

Stainless Steel Barrel Bolt

1-3/4” ...........17-1362-3/8” ...........17-138

Packaged5pieces Brite Chrome .................. 17-128Polished Brass .............. 17-134

Order number ................ 17-118

Brite Chrome .................. 17-130

Packaged1piece

2-1/2” LongChrome on Brass Barrel Bolt

• Finish: Body-satin Shoot - brass nickel plated

• Suppliedwithstainlesswoodscrews

Order number55-104

Parker Polished Chrome Barrel Bolt

CATCHES, LATCHES & BRACKETS

349

LatchesMini Touch Latch

Single Magnetic Touch Latch

Double Magnetic Touch Latch

RV & Boat Touch Latch

• Minilatch• Stikeincluded• Material:Steel/Plastic• Packaged1set• White

Order number ........ 17-104

Order number ........ 17-210

Brown ..................... 17-146White ....................... 17-144Black ....................... 17-148

Brown ..................... 17-124White ....................... 17-126Black ....................... 17-150

A simple push is all it takes to open or close a door.

• Suitableforglassorwooddoors• Material:plastic

• Doubletouchlatch for two doors• Material:plastic

CATCHES, LATCHES & BRACKETS

350

BracketsWorkstation Bracket

Heavy Duty Bracket

Suggested Uses:

• Computerworkstations

• Handicapcountertops

• Wallworkbenchtops

• Anyapplicationthatrequires strong, rigid support

Suggested Uses:

• Countertops

• Worksurfaces

• Bookshelves

• Closetshelves

Features:

• 45°cut-outallowsforusewith up to 1-3/8” x 1/3/8’ wall cleats

• 1/8”powdercoatedsteel

• 1,000lb.loadcapacity

• Soldperpair:1-left,1-right

Features:

• 5mmsteel

• Epoxycoated

• Soldperpiece

White (18” x 24”) ..............43-434Black (18” x 24”) ...............43-436White (24” x 29”) ..............43-438Black (24” x 29”) ...............43-440

White (11-1/2” x 8-1/2”) ....... 27-500Black (11-1/2” x 8-1/2”) ....... 27-502White (15-1/2” x 10-1/2”) ..... 27-504Black (15-1/2” x 10-1/2”) ..... 27-506White (19-1/2” x 13”) ........... 27-508Black (19-1/2” x 13”) ........... 27-510

CATCHES, LATCHES & BRACKETS

351

DIM INCHESA 6 5/8”B 12 1/8”C 7/8”

LOAD CAPACITY 600 LBS.

LOAD CAPACITY 300 LBS.

•80Lbs.CapacityPerSet•BlisterPacked•AllHardwareSupplied•SoldInPairs

•HeavyDutyStainlessSteel•Type304Electro-Polished•SoldIndividually

Folding Brackets

Order number ............. 27-294

Order number ............. 27-296

CATCHES, LATCHES & BRACKETS

352

Wall Standards & Shelf Brackets

Wall Standard24” .............27-30236” .............27-30448” .............27-30660” .............27-30872” .............27-31096” .............27-312

Double TrackWall Standard24” .............27-34836” .............27-35072” .............27-35296” .............27-354

Heavy DutyWall Standard24” .............27-33036” .............27-33248” .............27-33460” .............27-33672” .............27-33896” .............27-340

Shelf Bracket6” ...............27-3168” ...............27-31810” .............27-32012” .............27-32214” .............27-32416” .............27-32618” .............27-328

Shelf Bracket12” .............27-34214” .............27-34416” .............27-34618” .............27-34720” .............27-349

Shelf Bracket12” .............27-35614” .............27-35816” .............27-36018” .............27-36220” .............27-364

CATCHES, LATCHES & BRACKETS

353

Shelf ClipsNickel Plated Glass Retainer Shelf Clip

1/4” ‘L’ Shelf ClipMetal Spoon Clip

5 mm Shelf Clip with Steel PinMetal 1/4” Shelf Clip Socket

The Parrot Shelf ClipWood Shelf Retainer Clip

Ø 5

Ø 6

2 8

9 11

26 Order number5 mm ....... 27-208

Order numberClear ........ 27-228White ....... 27-232

Order number27-240

Order number5 mm ....... 27-1641/4” .......... 27-166

Order numberPolished Chrome ......27-194Polished Brass .........27-192

Order number5mm Bright Brass .......27-1685mm Bright Nickel .......27-1701/4” Bright Brass .........27-2121/4” Bright Nickel ........27-214

Order numberPolished Chrome ......27-226Polished Brass .........27-238

Order numberGlass shelves ..... 27-148Wood shelves ..... 27-150

Works With 3/16” Or 1/4” Glass

Packaged100 pieces

Requires a 9/32” boring

Can be used with 1/4” stem shelf clips

1/4” clip may be used with 27-192 or 27-194 clip sockets

• WhitePlastic• Ridgesallow5/8”+or–1/16”

shelf to work properly• Clipsfor1/2”or3/4”shelves• Othercolorsbyspecialorder• Packaged100pcs

5mm Econo Shelf Clip

CATCHES, LATCHES & BRACKETS

354

Fastening FittingsHanger Fittings

Key Lock Fitting

Order number19-198

Order number19-194

• Madeofsteel• Finish:brightzincchromate• Packaged5pieces

• Madeofsteel• Finish:brightzincchromate• Packaged5pieces

40(1-37/64")

31

16.2

(41/

64")

f4

4.5

28.

2

3276 (3

")

45(1

-25/

32")

33

16.5(21/32")

32

15(19/32")

24

42

f4

f4

4f4.5(W)f4.1(S) 8

wood screw Most of the merchandise in this catalog is available in all Hardware Imagination locations. If your selection isn’t available at the store nearest you, we’ll gladly order it from one of the other stores or through special order.