localview - socomec...• run the application ./startapp.sh at this stage all localview services...

LocalViewf o r L I N U X a n d M A C

Installation and operating manual EN

Manuel d’installation et d’utilisation FR

Manuale di installazione e uso IT

2 LocalView - Ref.: IOMLOCVWXX01-EN 01

This SOCOMEC continuous power system is guaranteed against any manufacturing and material defects.

The warranty is valid for 12 (twelve) months from the date of commissioning, if activation is carried out by SOCOMEC personnel

or personnel from a support centre authorised by SOCOMEC, and no more than 15 (fifteen) months from the date of shipment by

SOCOMEC.

The warranty is valid throughout the country. If the UPS is exported abroad, the warranty will only cover the parts used to repair the fault.

The warranty is valid ex-works and covers labour and parts used to repair the fault.

The warranty shall not apply in the following cases:

• Failure due to accidents or force majeure (lightning, floods, etc.);

• Failure due to negligence or improper use (use outside tolerance limits: temperature, humidity, ventilation, electric power supply,

applied load, batteries);

• Insufficient or inadequate maintenance;

• Attempted maintenance, repairs or modifications not carried out by SOCOMEC personnel or personnel from a support centre

authorised by SOCOMEC.

• If the battery has not been recharged in accordance with the terms indicated on the packaging and in the manual, in cases of

extended storage or UPS inactivity.

SOCOMEC may, at its own discretion, opt for the repair of the product or the replacement of the faulty or defective parts with new

parts or used parts that are equivalent to new parts with regard to functions and performance.

Defective or faulty parts replaced free of charge shall become the property of SOCOMEC.

Replacements, repair of parts, or any modifications made to the product during the warranty period will not extend the duration of

the warranty.

SOCOMEC shall not be responsible for damages under any circumstances (including and without limitations, damage for loss of

earnings, interruption of activity, loss of information or other financial losses) resulting from the use of the product.

These conditions are subject to Italian law. Any disputes fall under the jurisdiction of the Court of Vicenza.

CERTIFICATE AND CONDITIONS OF WARRANTY

SOCOMEC retains the full and exclusive ownership rights over this document. Only a personal right to use the document for the

application indicated by SOCOMEC is granted to the recipient of the document. The reproduction, modification, distribution of this

document, partially or fully and in any way, is expressly prohibited except upon Socomec’s express prior written consent.

This document is not a specification. SOCOMEC reserves the right to make any changes to information without prior notice.

3LocalView - Ref.: IOMLOCVWXX01-EN 01

EN

GL

ISH

CONTENTS

EN

GL

ISH

1. SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. LOCAL VIEW FOR LINUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1. COMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3. COMMUNICATION CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4. RUNNING LOCAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.5. NOTIFICATION UTILITY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.6. LOCAL VIEW UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3. LOCAL VIEW FOR COMPUTER WITH MAC OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.1. COMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.3. COMMUNICATION CHANNEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4. RUNNING LOCAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.5. STARTING APPLICATION ON A MAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.6. NOTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.7. LOCALVIEW UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4. USER INTERFACE WEB PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1. GENERAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2. SERVICE AND UPS STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.3. USER INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5. EXPERT LOCALVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1. MENU NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.2. MEASUREMENTS HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.3. EVENT LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.4. EMAIL CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.5. SHUTDOWN CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.6. USER CONFIGURATION - MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . 30

5.7. COMMUNICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33


UPS monitoring

• Simple user interface

- UPS status

- Battery status and measurements

- Load status and measurements

• Expert level access for :

- UPS events history log

- Measurements history log

- Configuration

- Email notification

- Shutdown procedure

- Miscellaneous (language, serial port, log filter)

Alert notification via email

• Simple user interface

• Multiple recipients

Automatic shutdown procedure

• Event selection

• Batch and shutdown timing

UPS communication with the server/Mac

• RS232

• USB

• Ethernet

1. SUMMARY

1-1


EN

GL

ISH

EN

GL

ISH

2.1. COMPATIBILITY

HARDWARE COMPATIBILITY

LocalView runs on x86 / x64 platform.

A serial port, USB port or Ethernet connection is required depending on the UPS model.

LIST OF TESTED LINUX DISTRIBUTION

• UBUNTU

• DEBIAN

• REDHAT

• SUSE

WEB BROWSER COMPATIBILITY

The LocalView user interface is provided via web server, included in the LocalView package.

LocalView is compatible with:

• Mozilla

• Safari

• Chrome

2.2. INSTALLATION

USER ACCOUNT

It is necessary to install LocalView software with the administrator account as the root user.

2. LOCAL VIEW FOR LINUX



LOCALVIEW PACKAGE

Copy the LocalView package from CD or the SOCOMEC website to LINUX disk (i.e. the user /Documents standard directory).

Extract gz.tar file via file manager or via Terminal.

tar –zxvf L32_Package_xxx

tar –zxvf L64_Package_xxx

After unzipping, the setup and localview folders are present in the same directory.

2.2-1

./install.sh to install LocalView, then LocalView is installed in '/usr/Socomec UPS/LocalView' folder by default.

WARNING!

Do not change the default installation directory.

2.2-2

2.3. COMMUNICATION CHANNEL

LocalView communicates via RS232, USB or Ethernet. Ensure the port provided for LocalView is available.

If a USB/R232 converter is used, the device has to be installed beforehand (please refer to the manufacturer's website for the

driver). The resource is /dev/ttyUSB0 in this case.

You can check the list of devices with the following shell command: dmesg | grep tty

SETTINGS IN THE CASE OF ETHERNET CONNECTION:

UPS Protocol type: VU-MAP for ITYS PRO UPS range

IP address: UPS address (to check on the UPS mimic panel)

Port: 1025.


EN

GL

ISH


2.4. RUNNING LOCAL VIEW

MANUALLY VIA TERMINAL

• Open a terminal session

• Select the installation folder : cd '/usr/Socomec UPS/LocalView'

• Run the application ./StartApp.sh

At this stage all LocalView services will be running.

RUNNING LOCALVIEW AS A DEMON

If LocalView is installed as a demon all services will be running when LINUX is starting up. It is not necessary to open a session to run it.

EXAMPLE OF INSTALLATION:

UBUNTU / DEBIAN

Edit the following file using root rights: /etc/rc.local

Add this line before the exit 0 command: sh '/usr/Socomec UPS/LocalView/StartApp.sh' &

REDHAT

Edit the following file using root rights: /etc/rc.d/rc.local


SUSE

Edit the following file using root rights: /etc/init.d/after.local


After saving the file it is necessary to restart LINUX to start LocalView as a demon.

OPENING THE USER INTERFACE

Start the web browser and open the LocalView home page with this link: http://localhost/8080/index.html

Port 8080 is set by default. It is possible to change the port on the LocalView Expert Miscellaneous page.

Communication with the UPS is not open the first time.

Select the LocalView Expert link to switch to configuration pages.

2.4-1

Select CONFIGURATION menu, and Communication slide.



• Select the interface:

- USB for NETYS UPS range

The protocol is set to PH

- Serial for other UPS models

• Select the Protocol and serial configuration:

Select the protocol: JBUS-P

Slave ID: set to 1 by default

COM speed: 9600 by default.

• ETH (Ethernet)

- Select the protocol: VU-MAP for ITYS PRO

- IP address of the UPS

- Port: 1025

• Save the parameter

At the end of the procedure communication starts.

The UPS status is displayed on the page header.

2.5. NOTIFICATION UTILITY INSTALLATION

LocalView includes a notification application. This application is an external tool based on the Desktop Graphical Interface

currently used by the system, such as GNOME or KDE.

Two specific tools can be used depending on the LINUX distribution and the application:

• GNOME/UNITY environment > '/usr/Socomec UPS/LocalView/StartMenuBar_Gnome.sh'

• KDE environment > '/usr/Socomec UPS/LocalView/StartMenuBar_KDE.sh'

IMPORTANT PREREQUISITE!

The MenuBar application requires these system tools to be installed:

GNOME/UNITY environment > notify-send

KDE environment > kdialog

Usually these tools are present by default on the system. If not they must be installed, which can be implemented

using the standard software management present on the Linux System.

See the following steps for automatic startup of the notification program.


EN

GL

ISH


2.5-2

2.5-1

UBUNTU (GNOME/UNITY)

Start the application Startup Applications

Click on Add and select the required application.


REDHAT (GNOME)

Run the application gnome-session-properties manually (using ALT + F2).


2.5-3

2.5-4


DEBIAN (GNOME)

Go to the menu SYSTEM > PREFERENCES > STARTUP APPLICATIONS



EN

GL

ISH


Start the application Autostart.

2.5-5

2.5-6

Click on Add script and select the required application.

SUSE (KDE)

Start the application Autostart

Click on Add script and select the required application.


NOTIFICATION

Notification is only displayed if a session is open.

This application is started when a new session is open and stopped when closed.

Notification relates to UPS STATUS, and SHUTDOWN PROCEDURE. Normal status is not notified.

Example of notification display web page.


2.5-7

Bear in mind that notification pops up in different Linux distributions. Layout and position may differ.

NOTIFICATION LIST

Status Description

No communication with UPS No communication with UPS

Shutdown procedure in progress Shutdown procedure in progress

UPS Off or Imminent Stop UPS Off or Imminent Stop

UPS on Standby

Alarm Present or On Bypass Alarm Present or On Bypass

NORMAL MODE / eco MODE Normal Mode

Expert / Viewer Link Button Switch to Expert or Viewer program

2.6. LOCAL VIEW UPDATE

LocalView makes it possible to access the SOCOMEC SOFTWARE website to download the latest release of LocalView if required.

When a new release is installed all previous configuration and log files are kept. It is not necessary to configure the LocalView

environment again.


EN

GL

ISH

3. LOCAL VIEW FOR COMPUTER WITH MAC OS

3.1. COMPATIBILITY

HARDWARE COMPATIBILITY

LocalView runs on the APPLE platform.

A serial port or USB port is required depending on the UPS model. With a serial connection the RS232/USB converter is mandatory.

Recommended converter: PROLIFIC TECHNOLOGY USB/RS232 Converter.

MAC OS COMPATIBILITY

• YOSEMITE

WEB BROWSER COMPATIBILITY

The LocalView user interface is provided via web server, included in the LocalView package.

LocalView is compatible with:

• Safari

• Chrome

3.2. INSTALLATION

USER ACCOUNT

It is necessary to install LocalView software with the administrator account.

LOCALVIEW PACKAGE

Copy the LocalView package (LocalView_Mac_xxx.mpkg) from CD or SOCOMEC website to MAC disk

Double click on the file to install LocalView and follow the standard installation tools.

3.2-1



3.3. COMMUNICATION CHANNEL

LocalView communicates via RS232 or USB. Ensure the port provided for LocalView is available.

If using a USB/R232 converter the device has to be installed beforehand.

The resource is /dev/tty.usbserial in this case.

Checking the driver: Select about in MAC system, info menu and system report.

In the HW list device check on USB item if the device is present and running.

3.4. RUNNING LOCAL VIEW

RUNNING LOCALVIEW AS A SERVICE

It runs automatically as a service. When the MAC restarts, LocalView starts as well.

OPENING THE USER INTERFACE

Start the web browser and open the LocalView home page with this link: http://localhost/8080/index.html

Port 8080 is set by default. It is possible to change the port on the LocalView Expert page.

Communication with the UPS is not open the first time.

Select the LocalView Expert link to switch to configuration pages.

3.4-1

Select CONFIGURATION menu and Communication slide.

• Select the interface




• Select the Protocol and serial configuration

- Select the protocol : JBUS-P

- Slave ID : set to 1 by default

- COM speed: 9600 by default.

• ETH (Ethernet)



- Port: 1025

• Save the parameter

At the end of the procedure communication starts.

The UPS status is displayed on the page header.


EN

GL

ISH


3.5. STARTING APPLICATION ON A MAC

• Using the icon on MenuBar

3.5-1

3.5-2

3.5-3

• Using the APP on Application Folder

• Using the APP on LaunchPad


3.6. NOTIFICATION

LocalView includes a notification application.

On the MAC MenuBar a new icon is added. This icon gives access to LocalView Viewer and LocalView Expert pages, as described

in the previous paragraph. This icon flashes during UPS event notification or the shutdown procedure.

Clicking opens the MenuBar (see figure 3.5-1).

The first line gives UPS status, and the second part accesses LocalView interfaces.

NOTIFICATION

Status Description

Service stopped Service Stopped




UPS on Standby


NORMAL MODE / eco mode Normal Mode

3.7. LOCALVIEW UPDATE

LocalView makes it possible to access the SOCOMEC SOFTWARE website to download the latest release of LocalView if required.

When a new release is installed all previous configuration and log files are kept. It is not necessary to configure the LocalView envi-

ronment again.



EN

GL

ISH

4. USER INTERFACE WEB PAGE

The following chapter is common to LINUX and MAC.

The user interface is identical for both platforms.

4.1. GENERAL OVERVIEW

4.1-1

4.2-1

The top bar of the page gives UPS status, load rate and remaining backup time.

During the shutdown procedure these parameters are replaced with shutdown procedure status, including the remaining time

before shutdown.

4.2. SERVICE AND UPS STATUS

UPS STATUS

When running, an icon is present in the top area of the Viewer or Expert

Icon colour defines the service and UPS status, for example:

Status Icon Description

Service Stopped Service Stopped




UPS on Standby


NORMAL MODE / eco mode Normal Mode



UPS PARAMETERS

Load rate and remaining backup time are displayed on the status bar. Values are automatically refreshed when updated.

If the remaining backup time is not available from the UPS the label and value are disabled.

EXPERT / VIEWER HYPERLINK

This link switches from Local View viewer to Expert mode and vice versa.

4.3. USER INTERFACE

1 UPS REFERENCE

Name and picture of the UPS connected to the server/Mac.

LIST OF UPS SYSTEMS

MODULYS 1/1

NETYS PE

NETYS PL

NETYS PR

ITYS

NETYS RT

Note: the UPS picture is approximate and may differ from the actual UPS connected to the server/Mac.

2 UPS STATUS


EN

GL

ISH

Status Type of info Reason

AlarmThe UPS output will be switched OFF due to a

critical alarm(1)

Alarm AC failure

StatusServer/Mac powered by the mains, and Inverter

automatically switched on when AC failed

Status Server/Mac powered by mains(1)

Status Server/Mac protected by UPS(1)

Status Server/Mac not powered and awaiting reactivation

Status Server/Mac not supplied(1)

(1). Not available for Netys PE and Netys PL.

3 BATTERY BACKUP TIME

The remaining backup time is displayed in minutes, and automatically updated when the value changes.

Depending on the UPS range, backup time is only calculated when the UPS switches to the battery; otherwise the value is not

displayed.

4.3-1




4 BATTERY STATUS

Symbol Status Value

Battery not connected or

UPS ON BYPASS(1)

BATTERY LOW

BATTERY DISCHARGED(1)

BATTERY DISCHARGING

BATTERY CHARGING(1)

BATTERY CHARGED(1)The level represents % capacity.

From 60 to 100%.

(1). Not available for Netys PE and Netys PL.

5 BATTERY CAPACITY

The battery capacity (in %) is displayed if the measurement is calculated by the UPS, otherwise the battery voltage is displayed.

6 BATTERY TEST BUTTON

LocalView can test the battery. If isn’t available battery testing is not possible or has been disabled by the UPS.

Battery test status and results are displayed on the ALARM bar (8).


EN

GL

ISH


BATTERY STATUS

Battery OK(1)

Battery alarm

Battery Test alarm(1)

Battery test in progress

(1). Not available for Netys PE and Netys PL

7 LOAD STATUS

The blue tank represents the % of UPS load rate:

In the event of overload ( Load rate > 100%) the tank is yellow :

4.3-2

8 BATTERY STATUS & ALARM BAR

When a UPS alarm occurs it is displayed and the Alarm ACK button appears . If there are several alarms, they are displayed

consecutively.

LIST OF ALARMS

END BACKUP TIME

BATTERY ALARM

GENERAL ALARM

OVER TEMPERATURE (1)

OVERLOAD (1)

(1) Not available for Netys PE and Netys PL



9 ACK BUTTON

When a new alarm occurs the buzzer sounds on the UPS. Selecting sends a command to stop the buzzer.

Example of the User Interface with a general UPS alarm:

4.3-3


EN

GL

ISH

5. EXPERT LOCALVIEW

5.1. MENU NAVIGATION

• Accesses the measurements history

• Accesses the event log (Status and Alarms)

• SMTP and Email configuration

• Server/Mac Shutdown configuration

• Miscellaneous item:

- Language selection

- Log filter and sample settings

- Automatic update settings

• UPS communication port settings

5.2. MEASUREMENTS HISTORY

5.2-1

Press the left or right arrows to move to the previous or following measurements log pages.


5. EXPERT LOCALVIEW

LIST OF MEASUREMENTS STORED

Measurements Format

UPS Load Rate %

Output voltage V (L1, L2, L3 if triphases)

Battery capacity %

Battery voltage V

Input voltage V (L1, L2, L3 if triphases)

The number of samples depends on logging filters set on the miscellaneous page.

Default setting: Records by WEEK, 10 minute sampling.

The oldest record is replaced with the newest (FIFO). Maximum no. of records allowed: ~ 1500.

EXPORT

This option saves the entire measurements history in CSV format to the local disk. It is possible to open this file using an external

tool for diagnostic purposes if required. It can also be used as backup.

5.3. EVENT LOG

LocalView creates a history log with the most important statuses and alarms.

Each new event is dated and stored in a file.

5.3-1


EN

GL

ISH

EN

GL

ISH

LIST OF EVENTS STORED:

STATUS TYPE

Imminent Stop ALARM

On Battery ALARM

End Backup Time ALARM

Battery Alarm ALARM

General Alarm ALARM

Over Temperature ALARM

Overload ALARM

Battery Test Alarm ALARM

Battery Test In Progress STATUS

Battery OK STATUS

eco MODE STATUS

Bypass Mode STATUS

Normal Mode STATUS

Standby Mode STATUS

Off STATUS

EVENTS FILTERING

5. EXPERT LOCALVIEW

5.3-2

It is possible to select different event periods, for example:

Last 7 days shows events recorded for the last seven days.

All disables the current filter.

EXPORT

This option saves the entire event log in CSV format to the local disk. It is possible to open this file using an external tool for diagnostic

purposes if required. It can also be used as backup. The recommended default file name is: EventsLog_ddMMyy_HHmm.csv,

where dd = day; MM = month; yy = year, HH = hour (24h format); mm = minutes.


5.4. EMAIL CONFIGURATION

LocalView can send notification according to different events. It is possible to select events, level of criticality and up to 8 recipients.

This process is managed by the service. It is not necessary to have the User Interface open.

5.4-1

SMTP SERVER CONFIGURATION

Defines mail server network configuration

- In the case of a company mail server

- In the case of external providers' mail server

- Account configuration

EVENTS

Click inside the box to enable the event that will send an email.

RECIPIENTS

The recipient address format is: name@domain

The description field is only for information, it is not included in the email body.

Level of criticality: Info = All enabled events

Warning = Warning + Critical events

Critical = only Critical events

SEND A TEST EMAIL

Sends a test email to check the mail server configuration (SMTP).

5. EXPERT LOCALVIEW


EN

GL

ISH

EN

GL

ISH

5.4-2

UPS New Events

LocalViewNetys

L a s t E v e n t s t r i g g e r e d :

G e n e r a l A l a r m

E v e n t s s t i l l a c t i v e :

O v e r l o a d

O v e r Te m p e r a t u r e

5. EXPERT LOCALVIEW

CRITICALITY MANAGEMENT

The different levels are :

• Info

• Warning

• Critical

The recipient will only receive an email event from the minimum level selected. For example:

• Critical = Only Critical level

• Warning = Critical + Warning levels

• Info = Info + Warning + Critical levels

DELAY MANAGEMENT

Delays and repetitions are set to 0 by default. If events occur emails are sent immediately without repetitions.

LocalView sends notification after a delay, which is set in hours. If the event is still present email notification is sent at the end of the period.

countdownevent present

delayreached

repetition event no longer

present

email issue

process

new event

General case:

notification

event cancelled

EMAIL FORMAT

eMail subject :

UPS New Events

UPS Events Cancelled

UPS Events Notification

Email message:

New Events:

Events Cancelled:

Events Active:


5. EXPERT LOCALVIEW

5.5. SHUTDOWN CONFIGURATION

LocalView can shut the Server/Mac down. It is possible to select events, delays, and shutdown commands.

This process is managed by the service. It is not necessary to have the User Interface open.

If a script file is present it should be executed before shutdown. It must be created before setting the shutdown parameters.

5.5-1

SHUTDOWN EVENTS

This table illustrates the server/Mac shutdown and timing procedure.

Events Warning interval Delay before executing the script Delay before OS shutdown

On Battery

Fixed at 30 seconds

First delay Shutdown delay

0 = Immediate

Range from 1’ to 60’

Overload

Over Temperature

Battery Low

Imminent Stop

On Bypass


EN

GL

ISH

EN

GL

ISH

5. EXPERT LOCALVIEW

SHUTDOWN TIMING

CASE 1:

No shutdown

CASE 2:

Shutdown process

Event

Detection

First

notificationFirst delay countdown

End delay:

Script

execution

Shutdown

delay

countdown

End delay:

Server/Mac

Shutdown

SCRIPT SETTINGS

Click on the box to activate this function.

Select the script/batch file to be executed, via the file explorer.

SHUTDOWN COMMAND

Click on the box to enable shutdown.

UPS SHUTOFF

LocalView sends a delayed UPS shutoff when the Server/Mac shutdown is starting, and only in the event of a battery alarm. The

UPS shuts off when the countdown is completed.

This function isn’t available for all UPS systems (Refer to your UPS manual).

TEST SHUTDOWN PROCEDURE

LocalView checks procedure and timing via AC Fail/ On battery status simulation.

It is possible to cancel this procedure during the shutdown countdown.

The UPS shutoff will not be executed in this case for safety reasons.


5. EXPERT LOCALVIEW

USER NOTIFICATION

During the shutdown procedure UPS status is replaced with shutdown status, the reason, and countdown notification. This notifica-

tion is refreshed every 30s. The countdown indicates the remaining time in seconds before Server/MAC shutdown.

Shutdown Status includes:

- Shutdown warning

- Shutdown cancelled

- Shutdown in progress

5.6. USER CONFIGURATION - MISCELLANEOUS

5.6-1

LANGUAGE

The User Interface goes to English by default. It is possible to change the language by selecting the text.

FILTER

The filter defines the period and sample time for the measurements history.

Detailed record table:

Sample in minutes DAY WEEK MONTH

1 1440

2 720

5 288

10 144 1008

20 72 504

30 48 336 1488

60 24 168 744

HTTP PORT

It is possible to change the HTTP port of the application. If changed, it is necessary to reload the webpage at the new port.

I.E.: httpport = 8081

New link = http://localhost:8081/index.html


EN

GL

ISH

EN

GL

ISH

5. EXPERT LOCALVIEW

UPDATE

Press the Check for updates button to check for new updates. If present a link-message

will notify you of the presence of new packages. Click on it to access the Socomec software download page.

5.6-2


5.7-1

5.7. COMMUNICATION

In the event of a UPS port connection modification on your Server/Mac the communication settings can be changed. Select the

correct communication port and settings manually.

• Select the interface:




• Select the Protocol and serial configuration:

Select the protocol: JBUS-P

Slave ID: set to 1 by default

COM speed: 9600 by default.

• ETH (Ethernet)



- Port: 1025

5. EXPERT LOCALVIEW


EN

GL

ISH

6. TROUBLESHOOTING

Page not found – Error 404 when LocalView html page is requested

Case 1

LocalView service is not stated. Check if the process is present in Linux (ps – all) and if the application is running on

MAC. Restart Local View.

Case 2:

The http port has been changed or the default port is not accessible.

It must be changed manually in UserPlantConf.xml. Local View has to be restarted.

The LocalView Status icon is blue

No communication with UPS. Check the cable, communication setting and UPS connection.

There is no button

Battery testing is not available, or has been disabled by the UPS

When I click on nothing happens

The battery test has been cancelled, or has been suspended by the UPS

When I click on the buzzer still sounds on the UPS

It is possible that a new alarm is occurring at the same time. The buzzer must be stopped directly on the UPS.

There is no button

The command has been sent, or the alarm is no longer present

I haven’t received an email

Check the SMTP configuration.

Test the send email function

Check that events have been enabled

The script file has not been executed

Check if the command file is already present on the disk, in the correct folder.

Manually test this script file.

Test this file with the shutdown test procedure function.

Shutdown hasn’t been completed

Check if the shutdown command is present on the configuration page.

Manually check if the command has been executed (command script shell)

Check if the shutdown command option is correct

The service doesn’t start automatically

Check your RC configuration. Try to start it manually.

I cannot change the language

Not all languages are available. Select the UK version. If nothing changes close LocalView and run it again.

The log file is empty

Maybe nothing has happened today. Select the Last 7 days or All filter option if events have been stored.

The measurements history is empty

Check the record sample via the configuration page, and check communication with the UPS.

Click on Export if data is stored in the file.

Close LocalView and open it again.

*IOMLOCVWXX01-EN 01*IOMLOCVWXX01-EN 01 10.2015

www.socomec.com

HEAD OFFICE

SOCOMEC GROUPS.A. SOCOMEC capital 10 816 800€ R.C.S. Strasbourg B 548 500 149 B.P. 60010 - 1, rue de Westhouse F-67235 Benfeld Cedex - FRANCE Tel. +33 3 88 57 41 41 Fax +33 3 88 74 08 00 [email protected]

Socomec worldwide

BELGIUM

SolarTel. +32 2 340 02 30 Fax +32 2 346 28 99 [email protected]

FRANCE

SolarTel. +33 1 45 14 63 00 Fax +33 1 48 67 31 12 [email protected]

GERMANYPower Control & Energy EfficiencyTel. +49 7243 65292 0 Fax +49 7243 65292 13 [email protected]. +49 621 71 68 40 Fax +49 621 71 68 444 [email protected]

ITALYPower Control & Energy EfficiencyTel.+39 02 98 49 821 Fax +39 02 98 24 33 10 [email protected]. +39 0444 598611 Fax +39 0444 598627 [email protected] Tel.+39 02 98 242 942 Fax +39 02 98 240 723 [email protected]

NETHERLANDS

SolarTel. +31 30 760 0900 Fax +31 30 637 2166 [email protected]

POLANDPower Control & Energy EfficiencyTel. +48 91 442 64 11 Fax +48 91 442 64 19 [email protected]. +48 22 825 73 60 Fax. +48 22 825 73 60 [email protected]

PORTUGALUPS / SolarTel.+351 261 812 599 Fax +351 261 812 570 [email protected]

ROMANIA


RUSSIA


SLOVENIA

SolarTel. +386 1 5807 860 Fax +386 1 561 11 73 [email protected]

SPAIN


UNITED KINGDOMPower Control & Energy EfficiencyTel. +44 1462 440 033 Fax +44 1462 431 143 [email protected].+44 1285 863 300 Fax+44 1285 862 304 [email protected]

TURKEY

SolarTel. +90 216 540 71 20-21-22 Fax +90 216 540 71 27 [email protected]

YOUR DISTRIBUTOR

IN ASIA PACIFIC

AUSTRALIAUPSTel. +61 2 9325 3900 Fax +61 2 9888 9544 [email protected]

CHINAUPS / Power Control & Energy EfficiencyTel. +86 21 52 98 95 55 Fax +86 21 62 28 34 68 [email protected]

INDIAPower Control & Energy EfficiencyTel. +91 124 4027210 Fax +91 124 4562738 [email protected]

Tel. +91 44 39215400 Fax +91 44 39215450 & 51 [email protected] [email protected]

SINGAPORE UPS / Power Control & Energy EfficiencyTel.+65 6506 7600 Fax +65 64 58 7377 [email protected]

THAILANDUPSTel. +66 2 941 1644 7 Fax +66 2 941 1650 [email protected]

VIETNAMUPSTel. +84 8 3559 1220 Fax +84 8 3559 1221 [email protected]

IN MIDDLE EAST

UNITED ARAB EMIRATES

SolarTel.+971 4 29 98 441 Fax +971 4 29 98 449 [email protected]

IN AMERICA

USA, CANADA & MEXICOPower Control & Energy EfficiencyTel. +1 617 245 0447 Fax +1 617 245 0437 [email protected]

OTHER COUNTRIES

NORTH AFRICAAlgeria / Morocco / [email protected]

AFRICAOther [email protected]

SOUTH EUROPECyprus / Greece / Israel / [email protected]

SOUTH AMERICATel. +34 93 540 75 75 [email protected]

MORE DETAILSwww.socomec.com/worldwide

IN EUROPE