lo-cat blanking conveyors – t he original
TRANSCRIPT
Lo-Cat Blanking Conveyors – the original
LO-CAT blanking conveyors were developed in 1982, and are the worldwide number one for the recovery of blanks and scrap from stamping tools. They are also highly suitable for body shells as well as scrap recovery from hard-to-access locations, and for transporting multiple blanks at the same time. The constant ongoing further development of their design and features ensures the maximum possible reliability and efficiency.
We differentiate between two drive systems used in LO-CAT blanking con-veyors: pneumatic and electric. The pneumatic drive features a pneumatic motor controlled with pressurised air, while the electric drive uses a servo motor matched precisely to the control of the respective presses. The lifting movement is triggered by a pneumatic valve of the press in all LO-CAT blanking conveyors.
Continuous magnetic strips provide optimal adhesion and prevent the parts being transported from slipping. The very high output speed of the LO-CAT blanking conveyors ensures the best possible material flow, together with maximum process safety.
For all LO-CAT blanking conveyors, we offer a 15-year spare parts warranty.
Blanking Die Systems
Made in Germany
Lo-Cat Blanking Conveyors overview
Pneumatic magnetic roller
Pneumatic magnetic roller Pneumatic magnetic roller Pneumatic magnetic roller Pneumatic magnetic roller Type 61 02 020Type 61 02 021
Type 61 02 027 00Type 61 02 027 01
Type 61 02 039 Type 61 02 040
Type Super-compact roller vertical Standard horizontal Horizontal Standard vertical
Drive Pneumatic Pneumatic Pneumatic Pneumatic
Nominal lengths 145 mm 448 to 1120 mm 160 to 608 mm 640 to 1120 mm
Feed type Magnetic Magnetic Magnetic Magnetic
Pneumatic vacuum roller Electric magnetic roller
Pneumatic vacuum roller Electric servo motor-driven magnetic roller
Type 61 02 060 Type 61 04 041
Type Standard horizontal Standard vertical
Drive Pneumatic Electric
Nominal lengths 335 to 400 mm 320 to 1120 mm
Feed type Vacuum Magnetic
Pneumatic magnetic roller
Pneumatic magnetic roller Pneumatic magnetic roller Pneumatic magnetic roller Pneumatic magnetic rollerType 61 02 041 Type 61 02 042 Type 61 02 043 Type 61 02 044
Type Standard vertical Vertical or horizontal, without lift vertical (flange), without lift Compact roller vertical
Drive Pneumatic Pneumatic Pneumatic Pneumatic
Nominal lengths 192 to 608 mm 160 to 608 mm 160 to 608 mm 160 mm
Feed type Magnetic Magnetic Magnetic Magnetic
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
Lo-Cat Pneumatic Magnetic Rollertype 61 02 020 / 61 02 021
This LO-CAT magnetic roller can be used for removal of blanks, scrap recov- ery and component transport even external to the tools for small blanks. It is also suitable for lateral removal and for multiple cuts. Its nominal length of 145 mm makes it the optimal solution for cramped spaces and small blanks. And thanks to its slim design, it is the ideal blanking conveyor for die-cast tools and tools made of steel when installation space is restricted. The roller is designed for a maximum stroke rate of up to 60 per minute and a speed of 150 m/min.
This LO-CAT blanking conveyor is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Rollertype 61 02 020 / 61 02 021
Notes• Oil-mist lubricators must be connected (this is included in the scope of supply).
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 25Speed [m/min] 150Torque [Nm] 15Stroke/min 60NL [mm] 145Maintenance-free yesContinuous speed control noSpecial design no
Part number 610202000 Part number 610202100
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
LO
-CAT
NL=
145 2xB Ø 11
106
130
70
H25
G 1/4"M
168
.567
VØ 6mm
LO
-CAT
NL=
145
2xB Ø 1180
150
B=1
31H
25
119
.5
G 1/4"M
116
Legend
V = Compressed air (controlled)M = MotorH = StrokeB = FixtureNL = Nominal length
Lo-Cat Pneumatic Magnetic Rollertype 61 02 027 00 / 61 02 027 01
The slim design of this LO-CAT magnetic roller makes it ideal for moulded tools when the space available for installation is extremely limited. Thanks to its brass slide rails, scratches to the sensitive metallic sheets are prevented during the feed process. With nominal lengths ranging from 448 mm to 1120 mm and a formidable torque of 25 Nm or 36 Nm, it is the perfect blanking conveyor for multiple cuts, for the transport and removal of small components and for scrap recovery.
This LO-CAT blanking conveyor is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Rollertype 61 02 027 00 / 61 02 027 01
Features• Double-acting pneumatic cylinder.• 30 mm stroke.• The guides and bearings are maintenance-free.
Notes• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 448 to 608 mm or from 640 - 1120, in steps of 32 mm each.• Throttle is included in the scope of supply of type 61 02 027.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 30Speed [m/min] 130Torque [Nm] 25 Type 61 02 027 01
36 Type 61 02 027 00Stroke/min 60NL [mm] 448 - 608 Type 61 02 027 01
640 - 1120 Type 61 02 027 00Maintenance-free yes
Continuous speed control yes Throttle 66104010 optional
Special design no
Example of an order 610202701-0544 *Model 00: NL 640 - 1120 mm640 / 672 / 704 / 736 / 768 / 800 832 / 864 / 896 / 928 / 960 / 992 1024 / 1056 / 1088 / 1120
*Model 01: NL 448 - 608 mm448 / 480 / 512 / 544 / 576 / 608
Legend
V = Compressed air (controlled)M = MotorH = StrokeB = FixtureNL = Nominal lengthR = Return air (controlled)Y = 100 + (NL-448)/2
Roller having nominal length of 544 mm6102 027 01 -0544
Item 6102Type 027Model* 01Nominal length (mm) -0544
VR
Ø 6mm
R 1/4"
77H
max
. 30
75 .5
97
Ø 140
120175
178
117
81
V
R
Ø 63
230
NL
NL
+80
2060
35 ±0.2
75 ±0.2
Y±0
.2Y
±0.2
4xB
Ø11
mm
M
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
Lo-Cat Pneumatic Magnetic Rollertype 61 02 039
This LO-CAT magnetic roller is perfect for tools with a low installation height (e.g. steel blanking die tools). It is suitable for removal of blanks, scrap recovery and component transport even external to the tools. It can also be used for lateral removal in tools. Thanks to its brass slide rails, scratches to the sensitive metallic sheets are prevented during the feed process. With a nominal length that starts at 160 mm, it is also suitable for cramped spaces and small blanks – and, because its nominal length goes up to 608 mm, for the removal of blanks and components with a length of up to 2,000 mm. It can do this up to a stroke rate of 60 per minute.
This LO-CAT blanking conveyor is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Rollertype 61 02 039
Features• Single acting pneumatic cylinder.• The guides and bearings are maintenance-free.
Notes• For anticlockwise rotation (TYPE 61 02 039 10) the blanking conveyors must be installed with lateral inversion.• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 160 to 608 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 28Speed [m/min] 130Torque [Nm] 25Stroke/min 60NL [mm] 160 - 608Maintenance-free yesContinuous speed control yesSpecial design no
Example of an order 610203910-0256 Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL to 160 - 608 mm160 / 192 / 224 / 256 / 288 320 / 352 / 384 / 416 / 448 480 / 512 / 544 / 576 / 608
Legend
V = Compressed air (controlled)M = MotorH = StrokeB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 256 mm, anticlockwise rotation6102 039 10 -0256
Item 6102Type 039Model* 10Nominal length (mm) -0256
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
246
(NL/
2)-8
NL/2
)-8
(NL/
2)-8
NL NL+7
4
50
70 752xB Ø 11mm
M
74
DrR61 02 039 00
Hm
ax
28
DrL61 02 039 10
V
Ø 6mm
Lo-Cat Pneumatic Magnetic Roller type 61 02 040
The slim design of this LO-CAT magnetic roller makes it ideal for moulded tools and steel blanking die tools when only limited space is available for installation. Thanks to its brass slide rails, scratches to the sensitive metallic sheets are prevented during the feed process. With nominal lengths ranging from 640 mm to 1,120 mm and a torque of 36 Nm, the blanking conveyor is also suitable for the transport and removal of very large and heavy blanks.
This LO-CAT blanking conveyor is entirely maintenance-free and can also be supplied in special designs.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Rollertype 61 02 040
Features• Double-acting pneumatic cylinder.• The guides and bearings are maintenance-free. Notes• For anticlockwise rotation (TYPE 61 02 040 10) the blanking conveyor must be installed with lateral inversion.• Other stroke lengths on request.• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 640 to 1,120 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 22Speed [m/min] 130Torque [Nm] 36Stroke/min 60NL [mm] 640 - 1120Maintenance-free yesContinuous speed control yes*Special design yes (on request)
* Throttle 66 10 40 10 optional
Example of an order 610204010-0960 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL 640 - 1120 mm640 / 672 / 704 / 736 / 768800 / 832 / 864 / 896 928 / 960 / 9921024 / 1056 / 1088 / 1120
Legend
V = Compressed air (controlled)R = Return air (controlled) M = MotorH = StrokeB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 960 mm, anticlockwise rotation6102 040 10 -0960
Item 6102Type 040Model* 10Nominal length (mm) -0960
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
(NL/
2)-1
92(N
L/2)
-192
NL
NL+1
00
50
2xB
Ø 11
mm
R 1/
4"
M
101 .5
3020
614
.5
92 .5
22 H
22 .5
45
DrL61 02 040 10
DrR61 02 040 00
VR
Ø 6mm
Lo-Cat Pneumatic Magnetic Roller type 61 02 041
The slim design of this LO-CAT magnetic roller makes it ideal for moulded and steel blanking die tools when only limited space is available for installation. Thanks to its brass slide rails, scratches to the sensitive metallic sheets are prevented during the feed process. With nominal lengths ranging from 192 mm to 608 mm and a formidable 25 Nm torque, it is the perfect blankingconveyor for multiple cuts, for the transport and removal of small com- ponents and also for scrap recovery.
This LO-CAT blanking conveyor is entirely maintenance-free and can also be supplied in special designs.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Roller type 61 02 041
Example of an order 610204110-0256 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL 192 - 608 mm192 / 224 / 256 / 288320 / 352 / 384416 / 448 / 480512 / 544 / 576 / 608
Legend
V = Compressed air (controlled)R = Return air (controlled) M = MotorH = StrokeB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 256 mm, anticlockwise rotation6102 041 10 -0256
Item 6102Type 041Model* 10Nominal length (mm) -0256
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
(NL/
2)+3
0(N
L/2)
+30
NL
NL
+10
0
R1/
4"
M
2xB
Ø11
mm
101.5
14.5
3020
7
22.5
45
92.5
22 H
DrL61 02 041 10
D rR61 02 041 00
VR
Ø 6mm
Features• Double-acting pneumatic cylinder.• The guides and bearings are maintenance-free. Notes• For anticlockwise rotation (TYPE 61 02 041 10) the blanking conveyor must be installed with lateral inversion.• Other stroke lengths on request.• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 192 to 608 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 22Speed [m/min] 130Torque [Nm] 25Stroke/min 60NL [mm] 192 - 608Maintenance-free yesContinuous speed control yes*Special design yes
* Throttle 66 10 40 10 optional
Lo-Cat Pneumatic Magnetic Roller type 61 02 042
The slim design of this fi xed LO-CAT magnetic roller makes it ideal for moulded and steel blanking die tools when only limited space is available for installation.With nominal lengths ranging from 160 mm to 608 mm and a formidable 25 Nm torque, it is perfect for the removal of small components and large scrap parts at cramped or hard-to-access locations. This variant is also suit-able for horizontal mounting.
This LO-CAT blanking conveyor is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Roller type 61 02 042
Features• Choice of flat assembly or wall mounting.• The guides and bearings are maintenance-free. Notes• For anticlockwise rotation (TYPE 61 02 042 10) the blanking conveyor must be installed with lateral inversion.• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 160 to 608 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 0Speed [m/min] 130Torque [Nm] 25Stroke/min 60NL [mm] 160 - 608Maintenance-free yesContinuous speed control yes*Special design no
* Throttle 66 10 40 10 optional
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
NL
NL+7
0
5020
NL/2
-27.
5
2xB
Ø11
mm
M
NL/2
-27.
5
48.5
142
.5
60 12
78
DrL61 02 042 10
DrR61 02 042 00
V Ø 6mm
Example of an order 610204210-0256 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL to 160 - 608 mm160 / 192 / 224 / 256 / 288 320 / 352 / 384 / 416 / 448 / 480 512 / 544 / 576 / 608
Legend
V = Compressed air (controlled)M = MotorB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 256 mm, anticlockwise rotation6102 042 10 -0256
Item 6102Type 042Model* 10Nominal length (mm) -0256
Lo-Cat Pneumatic Magnetic Roller type 61 02 043
The slim design of this fi xed LO-CAT magnetic roller makes it ideal for mouldedand steel blanking die tools when only limited space is available for installation. With nominal lengths ranging from 160 mm to 608 mm and a formidable 25 Nm torque, it is perfect for the removal of small components and large scrap parts at cramped or hard-to-access locations.
This LO-CAT blanking conveyor is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Roller type 61 02 043
Features• The guides and bearings are maintenance-free. Notes• For anticlockwise rotation (TYPE 61 02 043 10) the blanking conveyor must be installed with lateral inversion.• Oil-mist lubricators must be connected (this is included in the scope of supply). • Nominal length from 160 to 608 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 0Speed [m/min] 130Torque [Nm] 25Stroke/min 60NL [mm] 160 - 608Maintenance-free yesContinuous speed control yes*Special design no
* Throttle 66 10 40 10 optional
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
NL/
2-2
7.5
NL
NL
+70
5020
M
NL/
2-2
7.5
60 12 40
2024
.5
142
.5
2xB Ø 11mm
DrL61 02 043 10
22 .5
78
DrR61 02 043 00
V Ø 6 mm
Example of an order 610204310-0256 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL to 160 - 608 mm160 / 192 / 224 / 256 / 288 320 / 352 / 384 / 416 / 448 / 480 512 / 544 / 576 / 608
Legend
V = Compressed air (controlled)M = MotorB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 256 mm, anticlockwise rotation6102 043 10 -0256
Item 6102Type 043Model* 10Nominal length (mm) -0256
Lo-Cat Pneumatic Magnetic Roller type 61 02 044
The slim design of this LO-CAT magnetic roller makes it ideal for moulded and steel blanking die tools when only limited space is available for installation. Thanks to its brass slide rails, scratches to the sensitive metallic sheets are prevented during the feed process. It is the smallest of the LO-CAT blanking conveyors, with a nominal length of 160 mm and slide rails on the inside. With a formidable 25 Nm torque, it is the blanking conveyor for multiple cuts, andalso for transporting and removing small components and for scrap recovery.
This LO-CAT blanking conveyor is entirely maintenance-free and can also be supplied in special designs.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Magnetic Roller type 61 02 044
Features• Slide rails located inside.• Super-compact construction.• Double-acting pneumatic cylinder.• The guides and bearings are maintenance-free. Notes• For anticlockwise rotation (TYPE 61 02 044 10) the blanking conveyor must be installed with lateral inversion.• Other stroke lengths on request.• Oil-mist lubricators must be connected (this is included in the scope of supply).
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 22Speed [m/min] 130Torque [Nm] 25Stroke/min 60NL [mm] 160Maintenance-free yesContinuous speed control yesSpecial design yes (on request)
* Throttle 66 10 40 10 optional
Example of an order 610204410-0160 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL 160 mm
Legend
V = Compressed air (controlled)R = Return air (controlled) M = MotorH = StrokeB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotation
Roller having nominal length of 160 mm, anticlockwise rotation6102 044 10 -0160
Item 6102Type 044Model* 10Nominal length (mm) -0160
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
NL
= 16
0
230
M
R1/
4"B=N
L/2
B=N
L/2
101 .5
14.5
3021
1
22 .5
45
92 .5
22 H
2xB Ø 11mmDrL61 02 044 10
DrL61 02 044 00
VR
Ø 6mm
Lo-Cat Pneumatic Vacuum Rollertype 61 02 060
This LO-CAT vacuum roller is suitable for non-magnetic sheets or com-ponents – made of stainless steel, for example, or aluminium or copper. It is fi tted with special suction belts, to protect sensitive surfaces. The vacuum is generated using a vacuum pump with a permanent pneumatic connection, and the drive too is likewise controlled by a pneumatic connection. The roller’s space-saving construction makes it easy to integrate into new and existing projects. The design of the LO-CAT vacuum roller can be fi ne-tuned to meet the customer’s requirements and even coupled via a Cardan shaft, thus making it possible to remove large components and ensuring an absolutely synchronous feed. Up to 4 vacuum rollers can be connected to one another.
This LO-CAT blanking conveyors is entirely maintenance-free.
Blanking Die Systems
Made in Germany
Lo-Cat Pneumatic Vacuum Roller type 61 02 060
Notes• Different directions of rotation.• The stroke can be adjusted as desired between 16 and 22 mm. • The pressure gauge can be positioned externally if desired.• Available as a coupled version with 2, 3 or 4 rollers.• Oil-mist lubricators must be connected (this is included in the scope of supply).
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 16 - 22Speed [m/min] Torque [Nm] 36Stroke/minNL [mm] 335 und 400Maintenance-free yesContinuous speed control noSpecial design yes (on request)
Features• Double-acting pneumatic cylinder.• The guides and bearings are maintenance-free.
Example of an order 610206000-0400 * Model 00: Clockwise rotation Model 10: Anticlockwise rotation
NL 335 and 400 mm
Legend
V = Compressed air (controlled)D = Compressed air (permanent)R = Return air (controlled)H = StrokeB = FixtureNL = Nominal lengthDrR = Clockwise rotationDrL = Anticlockwise rotationVD = Vacuum canF = Conveyor belt
Roller having nominal length of 400 mm, anticlockwise rotation6102 060 00 -0400
Item 6102Type 060Model* 00Nominal length (mm) -0400
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
155
55NL
NL+
80
6565
NL+
15
196
30
207 .5
VR
D
Ø 6mm
62
193
50
234
H16
-22
2xBØ 11mm
FVDDrL61 02 06 0 10
ø 60
DrR61 02 06 0 00
Lo-Cat Electric Magnetic Rollertype 61 04 041
The LO-CAT electric magnetic roller delivers total accuracy in the removal of the blanks cut from the tool, thanks to its stop & go operation. The removal speed can be adjusted precisely to match the speed of the conveyor belts at the press and, if necessary, modified for higher or lower speeds. The stacking accuracy of the cut blanks is +/- 1 mm. Under certain conditions, the LO-CAT electric magnetic roller requires the one-time installation of a switching cabinet with controller at the press. Depending on the tool, different stacking intervals can be set using a speed controller.
Blanking Die Systems
Made in Germany
Lo-Cat Electric Magnetic Rollertype 61 04 041
Notes• The blanking conveyor can also be mounted with lateral inversion.• Other stroke lengths on request.• The motor can also be positioned externally via a Cardan shaft.• Electrical sensing via the position of the stroke.• Oil-mist lubricators must be connected (this is included in the scope of supply). • One control unit must be installed for each roller on the compression side (optional).• Nominal length from 320 to 1,120 mm, in steps of 32 mm each.
The CAD data is also available for downloading at www.lo-cat-systems.com.
Operating pressure [bar] 6Stroke [max.] 22
Speed [m/min] continuous control up to 240 metres/minute
Torque [Nm] 40Stroke/min 60NL [mm] 320 - 1120Maintenance-free yesSpecial design yes (on request)
Features• For Stop & Go operation with a stacking tolerance of <= +- 1 mm.• Double-acting pneumatic cylinder.• The guides and bearings are maintenance-free.
Example of an order 610404100-0960 NL 320 - 1120 mm320 / 352 / 384 / 416 / 448 / 480512 / 544 / 576 / 608 / 640 / 672704 / 736 / 768 / 800 / 832 / 864 896 / 928 / 960 / 9921024 / 1056 / 1088 / 1120
Legend
V = Compressed air (controlled)R = Return air (controlled)H = StrokeB = FixtureNL = Nominal lengthM = Servo motor
Roller having nominal length of 960 mm6104 041 00 -0960
Item 6104Type 060Model* 00Nominal length (mm) -0960
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com
H22
2x B Ø 11
375
345
146.5
367
.5
45
22.5
B=NL
+60
NL
NL+1
40
368
82
M
max.
100
VR
Ø 6mm
Lo-Cat Blanking Conveyorsoriginal Spare Parts
Description Part number Suitable for typeCompressed air motor, 15 Nm, 370 W 6610012 61 02 020
61 02 021
Compressed air motor, 25 Nm, 370 W 6610010 61 02 027 01
61 02 039
61 02 041
61 02 042
61 02 043
61 02 044
Compressed air motor, 36 Nm, 620 W 6610011 61 02 027 00
61 02 040
61 02 060
Micro oil mist lubricator G1/4“ with mounting accessories
66104015 All types
Magnetic roller 66106330 All types except 61 02 060
Sprocket wheel with 9 teeth 66120009 All types
Sprocket wheel with 13 teeth 67120013 All types
Spare chain 500 mm length 68120017 All types
Chain joint for spare chain 69120018 All types
Flow control valve G1/4“ 66104010 61 02 027 00
61 02 027 01
61 02 039
61 02 041
61 02 042
61 02 043
61 02 044
61 02 040
Endless vacuum belt NL = 335 mm 1204080 61 02 060 00-335
Endless vacuum belt NL = 400 mm 1204081 61 02 060 00-400
Single-acting compact cylinder 50-10 66105010 61 02 039
Double-acting compact cylinder 50-25 66105025 61 02 041
61 02 044
61 02 060
Double-acting compact cylinder 63-25 66106325 61 02 027 00
61 02 027 01
Double-acting compact cylinder 63-30 66106330 61 02 040
LO-CAT SySTemS GmbHBrand 12 / 79677 Schönau / Germany / Phone +49 7673 828-0 / Fax +49 7673 828-87 / [email protected] / www.lo-cat-systems.com