lng operation specialist · 2020. 1. 22. · scandinavian engineering group ltd registration...
TRANSCRIPT
Scandinavian Engineering Group Ltd Registration Number: IC20131083 10Th Floor Swiss Tower Jumeirah Lake Towers P.O. Box
3090562, Dubai, United Arab Emirates www.scengroup.com | E-mail: [email protected] Phone: +97 156 797 45 00
LNG Operation specialist Position Description
Essential duties and responsibilities:
Responsible for the operation and maintenance of Piping, compressors and auxiliary equipment, engines, turbines,
motors, cooling equipment, pump stations, pumps, dehydration equipment, process equipment, valves, seals and
other related equipment.
Ensure the cost effective and efficient performance of all engines, pumps and associated equipment at an LNG
facility.
Diagnose and repair engines, turbines, compressors, pumps, seals, valves and instruments.
Install, repair, service and maintain valves, centrifugal pumps, cryogenic compressors and reciprocating engines.
Responsible for the general upkeep and maintenance of all facilities and equipment, including pipeline right-of-
way, and storage areas, including but not limited to excavating, repairing, coating and backfilling excavations,
concrete work, painting, building erection, weed control, etc.
Maintain, adjust, make minor repairs, and operate equipment (e.g., industrial carry deck crane, backhoe, water
pumps, air compressors, coolers, test equipment, vehicles, etc.)
Oversee construction and/or maintenance activities performed by third parties.
Train and oversee company and third-party personnel as required.
Perform governmental compliance activities (PHMSA, State Agencies, EPA, USFS, etc.)
Perform minor electrical maintenance.
Identify, report and correct safety and environmental concerns.
Actively participate in safety programs and initiatives.
Participate in the development of O&M Procedures, Site Specific Procedures, project scopes and work plans.
Complete all applicable documentation and record keeping.
Perform all work in compliance with Company standards, procedures, regulatory, and Company tariff requirements.
Demonstrate performance toward operational excellence.
Demonstrate safe work practices with product (gas & liquid) handling techniques/procedures.
Ability to work alone safely and accomplish routine ‘covered tasks’ with oversight from a qualified employee.
Regular and predictable attendance
Other duties as assigned
Position Requirements Essential duties and responsibilities:
Responsible for the operation and maintenance of Piping, compressors and auxiliary equipment,
engines, turbines, motors, cooling equipment, pump stations, pumps, dehydration equipment, process
equipment, valves, seals and other related equipment.
Ensure the cost effective and efficient performance of all engines, pumps and associated equipment at
an LNG facility.
Diagnose and repair engines, turbines, compressors, pumps, seals, valves and instruments.
Install, repair, service and maintain valves, centrifugal pumps, cryogenic compressors and reciprocating
engines.
Responsible for the general upkeep and maintenance of all facilities and equipment, including pipeline
right-of-way, and storage areas, including but not limited to excavating, repairing, coating and
backfilling excavations, concrete work, painting, building erection, weed control, etc.
Maintain, adjust, make minor repairs, and operate equipment (e.g., industrial carry deck crane,
backhoe, water pumps, air compressors, coolers, test equipment, vehicles, etc.)
Oversee construction and/or maintenance activities performed by third parties.
Train and oversee company and third-party personnel as required.
Perform governmental compliance activities (PHMSA, State Agencies, EPA, USFS, etc.)
Perform minor electrical maintenance.
Scandinavian Engineering Group Ltd Registration Number: IC20131083 10Th Floor Swiss Tower Jumeirah Lake Towers P.O. Box
3090562, Dubai, United Arab Emirates www.scengroup.com | E-mail: [email protected] Phone: +97 156 797 45 00
Position Requirements
Essential duties and responsibilities:
Identify, report and correct safety and environmental concerns.
Actively participate in safety programs and initiatives.
Participate in the development of O&M Procedures, Site Specific Procedures, project scopes and work
plans.
Complete all applicable documentation and record keeping.
Perform all work in compliance with Company standards, procedures, regulatory, and Company tariff
requirements.
Demonstrate performance toward operational excellence.
Demonstrate safe work practices with product (gas & liquid) handling techniques/procedures.
Ability to work alone safely and accomplish routine ‘covered tasks’ with oversight from a qualified
employee.
Regular and predictable attendance
Other duties as assigned
Position Requirements
Minimum requirements:
Education:
High School Diploma or GED
Experience / knowledge and/or familiarity:
Must respond to, and address, callouts and emergencies after regular business hours including after
dark hours, which may require carrying a communication device.
Detailed knowledge of compressor or pump station, terminal, process plant, gas treatment, storage
facilities, gathering and transmission pipeline systems operations
Knowledge and experience in safe handling practices of flammable gases, liquids and high and low-
pressure systems
Experience analysing, adjusting, and making minor repairs on compressor engines, pumps and other
associated equipment
Experience reading and interpreting blueprints, P&IDs, and other diagrams
Certifications, licenses, registrations:
Possess a valid driver's license and meet company insurability requirements.
Must meet the criteria to maintain a Transportation Workers Identification Card (TWIC) as required by
USCG/DHS regulations.
May be required to possess a commercial driver’s license, drive a company commercial vehicle and
comply with all commercial vehicle regulations
May be required to achieve and maintain certifications as required to perform job duties
Achieve and maintain all OQ qualifications and progression requirements applicable to the job
classification.
Completion of any site specific technical training (TPC Training Program, locally developed training
program(s)
Completion of DOT OQ Qualification
Review appropriate O&M Procedures
Job level commensurate with experience and skill set
Other responsibilities:
The above statements describe the general nature and level of work being performed. This position
may perform other duties as assigned.
Project/Construction/Commissioning and Normal Operation phase responsibilities.
Scandinavian Engineering Group Ltd Registration Number: IC20131083 10Th Floor Swiss Tower Jumeirah Lake Towers P.O. Box
3090562, Dubai, United Arab Emirates www.scengroup.com | E-mail: [email protected] Phone: +97 156 797 45 00
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because
of race, colour, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of
disability or any other federal, state or local protected class.
For further information, please contact us on [email protected] or +971 56 797 45 00