list of ndt & inspection approved training organisations

APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only

1

ISSUE NO 128 DATE 24th January 2018 REF APP‐LIST‐NDT

List of NDT & Inspection Approved Training Organisations

CONTENTS

Part 1 – Accredited Non‐Destructive Testing (NDT) Courses Available Page 3

Part 2 – Courses outside the scope of PCN meeting specific criteria 4

Part 3 – Providers of individually designed level 3 training packages recognised by BINDT Page 18


2


Foreword Approval of Level 3 Training.

The BINDT Approval Panel, which reports to MQ&E (Membership, Qualification and Education Committee) routinely accredits training courses at Level 1 and 2. Courses are approved as meeting specific requirements, (generally defined in terms of an examination syllabus) and the object of the exercise is to ensure that all aspects of the syllabus are addressed within the training course at a suitable level and depth. Most courses that are accredited will be for training prior to PCN examinations but that need not always be the case. For instance if an ATO has a requirement to train candidates to perform a range of well defined tasks, then a training course could be designed, and subsequently accredited by BINDT as meeting those requirements and would be listed under part 2 of the approval list. The syllabus is well defined, therefore a training course can be designed to cover those areas of learning. This works well for Level 1 and Level 2 training but it does not work at Level 3. Level 3 courses need to be well versed in a very broad range of knowledge and the candidate should be familiar with Product Technology, the other four main NDT methods, Procedure Writing and so on. The way that we address this dilemma is to define three main requirements that training centres must meet if they are to be recognised as providers of Level 3 training:

1. The tutors must be Level 3 Certificated. 2. The training school must have available the defined Essential Reading material. 3. There must be a system in place whereby candidates are assessed on arrival, (or beforehand), in order to identify the gaps in their knowledge. The

training course must then be specifically designed to address those areas of weakness.

The course content must be designed as a bespoke product, suited to a particular individual. Any training establishment that meets the three requirements set out above may request that BINDT recognises that they are capable of offering Level 3 training courses and once proven at audit can be listed under part 3 of the approval list but will not be included on their certificate of approval.


3


PART I Accredited Non‐Destructive Testing (NDT) Courses Available

Note: Courses validated as suitable pre‐approval training for PCN examinations also broadly satisfy the General Theory and Product Technology requirements of employer‐based schemes (e.g. NAS 410, EN 4179 and SNT TC 1A). Any course offered under a company‐based certification scheme must also satisfy the requirements of the employer’s written practice and training programme. It is the employer’s responsibility that any necessary company specific training that would fall outside the validated course syllabus and content is adequately addressed. Condition Monitoring courses are in accordance with ISO18436 and CMGEN.

All courses listed below are approved as suitable preparation for the corresponding PCN examinations.


4


KEY TO CODES TO DEFINE SCOPE OF APPROVAL

Numbers in bold type indicate the certification level at which the course(s) are aligned. Letter(s) indicate the product sector to which each course is aligned.

CODE PRODUCT SECTOR

G GENERAL W WELDS C CASTINGS F FORGINGS/WROUGHT PRODUCTS A AEROSPACE R RAIL ISI IN‐SERVICE INSPECTION

CODE NDT METHOD

RT Radiographic Testing RI Radiographic Interpretation CRT Computerised Radiographic Testing UT Ultrasonic Testing MT Magnetic Particle Testing PT Penetrant Testing ET Eddy Current Testing VT Visual Testing WI Weld Inspection

ACFM Alternating Current Field

ISI UT UT thickness Measurement + Corrosion Monitoring of steel

TOFD Time of Flight DiffractionPA Phased Array

CODE SCOPE OF COMPETENCE

a X‐Ray only b Dense Metals Welds c Ultrasonic testing of railway axles d Ultrasonic testing of railway axles

(solid or hollow) e Single frequency Eddy Current Testing of

Weldsg Tube testing l Light Metal Welds r Rail


5


APPROVED TRAINING ORGANISATIONS ‐ UK

EAST ANGLIA – Name of Approved Training Organisation & Contact Details

RT RI CRT UT MT PT ET VT WI ACFM

International School of Aerospace NDT Unit 2, Beech Avenue Taverham Norwich NR8 6HW

Contact: Wayne Middleton T: +44 (0) 1603 260148. E: [email protected] E: [email protected] W: www.isandt.co.uk

1,2 A

1,2 A

1,2 A

1,2 A

1,2 A

TWI Ltd ‐ Cambridge Granta Park Abington Cambridge CB21 6AL

Contact: Michael Skerik T: +44 (0) 1223 899 500 E: [email protected] W: www.twitraining.com

2 W,C

2 W,C

1,2 G

TOFD

PA

1,2 W,F,C

1,2 W,F,C

2 F,A

Tri Service School of NDT 71 (IR) Squadron, Building 716 RAF Wittering Peterborough PE8 6HB

Contact: Andrew Murray T: +44 (0) 1780 417912 E: 71irsqn‐[email protected]

2 A 2

A 2 A

2 A

2 A

EAST of ENGLAND – Name of Approved Training Organisation & Contact Details

RT RI CRT UT MT PT ET VT WI ACFM GUIDED WAVE

Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Essex CM22 6SJ

Contact: Samantha Wright T: +44 (0) 1279 870276 E: [email protected] E: [email protected] W: www.aerospacendt.co.uk

1,2a A 1,2

1,2 A

PA

1,2 A

1,2 A

1,2 A

Guided Ultrasonics (Training) Ltd Unit 3 Brentwaters Business Park The Ham, Brentwood TW8 8HQ

Contact: Mark Evans T: +44 (0) 845 605 0227 E: info@guided‐ultrasonics.com W: www.guided‐ultrasonics.com

1 Wavemaker


6



EAST MIDLANDS – Name of Approved Training Organisation & Contact Details


SERCO Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP

Contact: Paul Seaton T: +44 (0)1332 264 782 E: [email protected]

1,2, C,D1R

1,2 W,F,C,R

NORTH EAST – Name of Approved Training Organisation & Contact Details


NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton‐on‐Tees TS18 3HF

Contact: Geoff Mason T: +44 (0) 1642 604 661 E: [email protected]

2 W

2 W

2 W

2 W

2 W

TWI Technology and Training Centre (North East) Ferrous Road Riverside Park Middlesbrough TS2 1DJ

Contact: Michal Skerik T: +44 (0) 1642 216320 E: [email protected] W: www.twitraining.com

2 W,F,C

2 W,C

1,2 G

2 W

2 W,F,C

2 W,F,C

2 F,A

1,2 Wf

AIS Shoreland Training NDT Ltd 3 & 4 Jupiter Court Tyne Tunnel Trading Estate Newcastle Upon Tyne NE29 7SE

Contact: Eve Roberts T: +44 (0)844 800 1810 E: [email protected] W: www.shorelandndt.com

2 W

1,2 W,F

1,2 W,F,C

1,2 W,F,C

1,2 W

1,2 W,F,C

1,2


7



SCOTLAND – Name of Approved Training Organisation & Contact Details

RT RI CRT UT MT PT ET VT WI ACFM ISI UT

Fife College Future Skills Centre, Stenton Road Glenrothes Fife KY6 2RA

Contact: Peter McPherson T: +44 (0) 1592 223 355/223 387 E: [email protected] E: [email protected] W: www.fife.ac.uk/

2 W

2 W

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C 2

Array Training Limited C/O Rigmar Group Hareness Circle Aberdeen AB12 3LY

Contact: Ray Wilson/Claire Fyvie T: +44 (0) 1224 243 000 E: [email protected] E: [email protected] W: www.rigmartraining.com

1,2 W

Basic Rad Safety

2 W

1,2 W,F

1,2 W,F

1,2 W,F

1,2 W

1,2 ISI UT

NORTH WEST – Name of Approved Training Organisation & Contact Details


Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ

Contact: Lynn Brodie E: [email protected] T: +44 (0) 1253 696400 W: www.talonblackpool.com

2 W

1,2 W,F

1,2 W,F,C

1,2 W,F,C

1,2 W


8



SCOTLAND – cont’d… RT RI CRT UT MT PT ET VT WI ACFM

Talon NDT Ltd Unit 6, Murcar Commercial Park Denmore Road Bridge of Don Aberdeen AB23 8JW

Contact: Ian Judge T: +44 (0) 1224 822 251 E: [email protected] W: www.talonndt.co.uk

1,2 W

Basic Rad Safety

2 W

1,2 W,F

1,2 W,F,C

1,2 W,F,C

1,2 W

TWI Aberdeen Unit 20 Spires Business Centre, Mugiemoss Road, Bucksburn Aberdeen AB21 9BG

Contact: Andrew Jeffreys T: +44 (0) 1224 691 222 E: [email protected] W: www.twitraining.com

2 W,C

1,2 G 1,2

W 1,2

W,F,C 1,2

W,F,C 1,2 W

Sonomatic Ltd The Core Industrial Estate Berryhill Crescent Murcar Aberdeen AB23 8AN

Main Contact: Chris Stanton Contact: Donna Stewart T: +44 (0) 1224 823960 E: [email protected] E: [email protected] E: [email protected] W: www.sonomatic.com

2 W

1,2 W,F

TOFD PA

(W,F)

1,2 W,F,C

1,2 W,F,C

1,2 We

WALES – Name of Approved Training Organisation & Contact Details


South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff CF23 8HF

Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: [email protected] W: www.swsndt.co.uk

1,2 W,A

2 W

1,2 A,W

1,2 W,F,C,

A

1,2 W,F,C,

A

1,2 A,F

1,2 W,F,C 2

Testia Ltd Quadrant House, Celtic Springs, Coedkernew, Newport NP10 8FZ

Contact: Charlotte Smith T: +44 (0) 1633 715811 E: [email protected] W: www.testia.com

1,2 A

1,2 A

1,2 A

1,2 A

1,2 A


9



WEST MIDLANDS – Name of Approved Training Organisation & Contact Details


NDT Consultants Ltd Middlemarch House Siskin Drive Coventry CV3 4FJ

Contact: Linda Dulay T: +44 (0) 24 7651 1151 E: sales@ndt‐consultants.co.uk W: www.ndt‐consultants.co.uk

1,2 F,C,A

1,2 F,C,A

1,2 F,C,A

1,2 F,C,A

YORKSHIRE & HUMBER – Name of Approved Training Organisation & Contact Details


IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield S9 1XH

Contact: Stephen Wisniewski T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org/arl

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C TOFD PA

1,2 W,F,C,

R

1,2 W,F,C,

R

1,2 W

1,2 W,F,C 1,2

ISI UT

Lavender International NDT Consultancy Services Limited Unit 7, Penistone Station Sheffield S36 6HP

Contact: Susan Young T: +44 (0) 1226 765 769 E: bev@lavender‐ndt.com W: www.lavender‐ndt.com

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C

TOFD‐W PA ‐W,F,C

1,2 W,F,C

1,2 W,F,C

1,2 F g

1,2 W e

1,2 W,F,C 2 1,2

W ISI UT

NDT Ltd Maltravers Road Sheffield South Yorkshire S2 5AD

Contact: Mr S Sennett T: +44 (0) 1142 727 317 E: [email protected] W: www.ndt.ltd.uk

2 W,F,C,

A

1,2 W,F

2 W,F,C,

A

2 W,F,C,

A

LIBERTY STEEL Stocksbridge Sheffield S36 2JA

Contact: Mr John Barker T: +44 (0) 1142 832 071 E: [email protected] W: www.libertyspecialitysteels.com

1,2


10


APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE

AUSTRALIA – Name of Approved Training Organisation & Contact Details


ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia

Contact: Paul Grosser T: +61 3 9574 6144 E: [email protected] W: www.attar.com.au

2 W

2 W

2 W,F,C

2 W,F,C

TCS NDT Tafe, Perth Campus, Building 2, Room, 1‐35, 30 Aberdeen Street, Perth, Western Australia 6000 Postal address (administration office) 28 Exmouth Drive Butler WA 6036

Contact: Elise Cronin T: +61 (0) 426 684 822 E: [email protected] W: www.tcsndt.com.au

1,2 W1,2 Basic Rad Safety

1,2 TOFD PA (W)

1,2 W,F,C

1,2 W,F,C

1,2

W ISI UT

CHINA (PEOPLE’S REPUBLIC) – Name of Approved Training Organisation & Contact Details


SGS (Shanghai) NDT Training & Examination Centre SGS‐CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road, Pudong District, Shanghai 201319, P.R. China

Contact: Shelley Xu T: +86 (0)21 6818 3905 E: [email protected] W: www.sgs.com

1,2 W,C 1,2 C

2 W,Cb

1,2 W,F,C

TOFD PA (W)

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C


11


CARIBBEAN – Name of Approved Training Organisation & Contact Details


NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.

Contact: Sonny James T: (868) 653 9343 T: (868)‐657‐6572 E: [email protected] E: [email protected] E: [email protected] W: www.learnndt.com

1,2 W

1,2 W,F,C

1,2 W,F,C

GREECE – Name of Approved Training Organisation & Contact Details


VOCATIONAL TRAINING CENTER: INDUSTRIAL AND BUSINESS EDUCATION AND TRAINING INSTITUTE‐ SEV Hellenic federation of enterprises.

KΕΚ Ι.V.EP.E‐SEV 143 Liossion & 6 Theirsiou Str. Attikis Square 10445 Athens Greece

Contact: Mr Thanos Totsikas T: +30 210 8257 817 E: [email protected] W: www.ivepe.gr

Basic Rad Safety course ONLY

1,2 W,P

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C 2

TQCC/Lavender Greece Z Pigis 51 382 22 Volos Magnesia Greece

Contact: Athena Xirofotou T: +30 24210 59881 E: [email protected] W: www.ketepe‐ndt.com

1,2 W

2 W

1,2 W

‘PLATE’ F,C

PA 1,2

1,2 W,F,C

1,2 W,F,C

1,2 F

1,2 W,F,C 2


12


GREECE – Cont’d….. Name of Approved Training Organisation & Contact Details


TQCC/Lavender Greece G. Papandreou 150, 14452 Metamorfosi, Athens, Greece

Contact: Dimitrios Pitteris & Apostolos Kotouas E: [email protected] T: +3024210 59881

1,2 W

2 W

1,2 W

‘PLATE’ F,C

PA 1,2

1,2 W,F,C

1,2 W,F,C

1,2 F 1,2

W,F,C 2

INDIA – Name of Approved Training Organisation & Contact Details


Noble Quality Evaluation Private Ltd Plot no. 20 & 21, Anjaneya Nagar (Near Miet), Gundur (Post), Tiruchirapalli, 620007, Tamil Nadu, India

Contact: Mr Ramesh Narayanasamy T: +91 822 095 4947 E: [email protected] W: www.nobleqe.com

2 W b 1,2

W 1,2 W

1,2 W

BIT inspection Technology No. 11, 6th Pillaiyar Koil Street, Ambal Nagar, Ekkatthuthangal, Chennai India 600032

Contact: Rajamanickam Baskar T: +91 98408 00863 E: [email protected]

1,2 W

2 W b 1,2

W 1,2 W

1,2 W

Smart Technocrats and Consultancy Services (I) Pvt. Ltd Plot No. 5ector 18A, Nerul, Navi, Mumbai, India 400706

Contact: Sunil Mukul T: +91 22 2770 6055 E: [email protected] / [email protected]

1,2 W

2 W b

1,2 W

TOFD PA (W)

1,2 W

1,2 W

A‐Star Training and Consultancy Pvt Ltd “Shree” Building, 47/11‐1 Devadi Street, Off Kutchery Road Near More Supermarket, Mylapore, Chennai 600004 Tamil Nadu, India

Contact: Anup Nair T: +91 44 2495 0082 E: anup@astar‐training.com

2 W

1,2 W

TOFD PA (W)

1,2 W

1,2 W

TWI India Pvt. Ltd Contact: Ayyala Venkateswara 2 1,2 1,2 1,2


13


78/97 Chamiers Road, Nandanam, Chennai, 600018 India

T: +91 (0) 44 43189691 /2 /3 /4 E: [email protected]

W b W

PAUT TOFD

W,F,C W,F,C

INDIA Cont’d ‐ Name of Approved Training Organisation & Contact Details


ROYAL TECH TRAINING & CONSULTANCY Plot no A75, Opp Petrol Pump, VUDA colony, gopalapatnam, Visakapatnam‐ 530027 Andrapradesh, India

Contact: Raja Suhas T: +91 8916524882 E: [email protected]

2 Wb 1,2

W 1,2 W

1,2 W

Trichy Institute for Welding M.S.A Complex, 1st Floor, Rail Nagar. Ariyamangalam, Trichy, 620010 Tamil Nadu India

PCN Coordinator: M Riyaz T: +914312442118 E: [email protected]

1,2 W

2 W 1,2

W 1,2 W

1,2 W

INDONESIA – Name of Approved Training Organisation & Contact Details


Indonesia Institute of NDT (IINDT) Trikarsa Equalita, Block C, No 12, Sei Panas, Batam, Indonesia 29433

Contact: Brillian Wiraprima Sardi T: +62 778 472 122 E: [email protected]

2 W

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2

PT WENS QUALITY ASSURANCE Komplex Pertokoan air mas, Block C, No.2 Batam Center Batam 29461 Indonesia

Contact: Mr. P. Sasikumar Tel no. +62 778 7486216 / 812 76663599 Email : [email protected] Email : [email protected] Website: www.wensgroup.com / www.ptwens.com

2 W

1,2 W

1,2 W

1,2 W

1,2 W

MALAYSIA – RT RI CRT UT MT PT ET VT WI ACFM


14


Name of Approved Training Organisation & Contact Details

TWI TECHNOLOGY (S.E.ASIA) SDN BHD No. 1, Jalan Utarid U5/13, Section U5, 40150, Shah Alam, Selangor Darul Ehsan

Contact: Noorhaslinda Binti Ahmad Nasir T: +603‐7848 1000 E: [email protected] W: www.twitraining.com

2 W

1,2 W

TOFD PA

1,2 W,F,C,

A

1,2 W,F,C,

A

MALAYSIA Cont’d – Name of Approved Training Organisation & Contact Details


Nilai Technical Training Centre‐NTTC PT 7328, Jalan BBN 1/2E Putra Nilai, 71800 Nilai Negeri Sembilan Malaysia

Contact: Sabri Ngah T: +606‐7947879 E: enquires@nttc‐my.org W: www.nttc‐my.org

1,2 W

1,2 W

1,2 W

1,2 W

1,2 W

Ruane‐TATI Sdn Bhd (Terengganu Advanced Technical Institute) PT 4847, Jalan Panchor, Telok Kalong, 24000 Kemaman, Terengganu Malaysia

Contact: Azmil Mohamad T: +609 863 1033 E: azmil.mohamad@ruane‐tati.com W: www.ruane‐tati.com

2 W b & l

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2 W

1,2

Trident Global Training & Consultancy No. 7 Jalan Cenderai 26, KWSN, Perindustrian, Kota Putri, 81750, Malaysia

Contact: Natarajan Rajappan T: +65 96416878 E: [email protected]

1,2 W

1,2 W

TOFD PA

1,2 W

1,2 W

1,2 W

MINDT TRAINING & CERTIFICATION SDN BHD No 18 Jalan Tanjung 13/2, Bandar Sri Damansara, 52200, Kuala Lumpur, Malaysia

Contact: Tan Hendry & Andy Kular E: [email protected] E: [email protected] T: + 603 6280 3448

1,2 W

1,2 W

1,2 W

1,2 W

1,2

W

NORWAY Name of Approved Training Organisation & Contact Details


APPTRAA GLOBAL AS Eiganesveien 14 4008 Stavanger NORWAY

Contact: Ravindira C Dev T: +47 4558 6749 E: [email protected] E: [email protected] E: [email protected]

1,2 W 1,2

W 1,2 W

1,2 W


15


SINGAPORE – Name of Approved Training Organisation & Contact Details


A‐Star Training and Consultancy Pte Ltd #05‐111, 18 Boon Lay Way Tradehub 21 Singapore, 609966

Contact: Shaik Khaja Mohiuddin T: +65 6465 0877 E: astar@astar‐training.com W: www.astar‐training.com

2 W b

1,2 W

TOFD PA

1,2 W

1,2 W

SETSCO Services PTE Ltd 18 Teban Gardens Crescent, Singapore 608925

Contact: Sze Thiam Siong T: +65 6566 7777 E: [email protected] E: [email protected] W: www.setsco.com

1,2 W,A

1,2 W,A

PA

1,2 W,F,C,

A

1,2 W,F,C,

A

1,2 A

SOUTH AFRICA – Name of Approved Training Organisation & Contact Details


African NDT Centre (Pty) Ltd 224 Witch‐Hazel Avenue Highveld Technopark Centurion South Africa

Contact: Mr W Claassens T: +27 (0) 12 665 3248 E: [email protected] W: www.andtc.com

1,2 W

2 W

1,2 W

PA W,F,C

1,2 W,F,C

1,2 W,F,C

1,2 W1

1,2 W,F,C 1,2

Non‐Destructive Academy of South Africa CC (NASA Durban branch) 3 Pastoll Road, Sarnia 3610, Durban, South Africa

Contact: Nish Kanaye T: +27 (0) 31 708 3433 E: [email protected] / [email protected] W: www.nondestructive.co.za

1,2 W

1,2 W

1,2 W 1,2

W

African NDT Centre (Pty) Ltd Suite 403, Block 4 Island Circle Office Park, 35‐37 Island Circle Road Riverhorse Valley Durban, South Africa

Contact: Mr W Claassens T: +27 31 569 5054 E: [email protected] W: www.andtc.com

1,2 W

2 W 1,2

W 1,2

W,F,C 1,2

W,F,C 1,2 W

1,2 W 1,2


16


THAILAND – Name of Approved Training Organisation & Contact Details


A‐Star Thailand – Master Solution Co Ltd. 41/19 Sermsuwan Road, T.Maptaphut A Muangrayong, Rayong 21150

Contact: Gaurav Kaushik T: +66 38 691 152/3 E: gaurav@astar‐training.com W: www.astar‐training.com

2 Wb

1,2 W

PA (W) 1,2

TOFD 1,2

1,2 W

1,2 W

UNITED ARAB EMIRATES UAE – Name of Approved Training Organisation & Contact Details


WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC PO BOX 393179, Unit 2F‐A‐02, Empire Heights, Tower A, Business Bay, Dubai, UAE

Contact: Babu Sajeesh Kumar T: +971 4554 6284 +971 5624 28507 E: [email protected]

2 W

2 W,C

1,2 W

TOFD 1,2 W

PA(UT) 1,2 W,F,C

1,2 W,F,C

1,2 W,F,C

1,2

SAUDI ARABIA RT RI CRT UT MT PT ET VT WI ACFM


17


USA ‐ Name of Approved Training Organisation & Contact Details


LAVENDER INTERNATIONAL NDT University Business Park, Suite F. 15200 Middlebrook Dr. Houston Texas 77058 United States

Contact: Nicola Dodsley T: +44 (0) 1226 765 769 E: nicola@lavender‐ndt.com W: www.lavender‐ndt.com

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C

TOFD PA – W,F,C

1,2 W,F,C

1,2 W,F,C

1,2 F g

1,2 W e

1,2 W,F,C 2

1,2 ISI UT

Name of Approved Training Organisation & Contact Details ENGINEERING TECHNOLOGY TRAINING CENTER – ETTC P.O. # 70401, Al Khobar – 31952, Kingdom of Saudi Arabia

Contact: Motlaq Motairi T: +966 92 000 2712 E: president@axis‐inspection.com

1,2 W

1,2 W

1,2 W

1,2 W


18


PART 2 Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN)

Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.

Training Organisation Contact Method(s) Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Stansted Airport Bishop’s Stortford Essex, CM22 6SJ

Contact: Samantha Wright T: +44 (0) 1279 870276 E: [email protected] W: www.aerospacendt.co.uk

Infrared Thermography (Aero) Acid Etch Inspection Bond Testing of structures using the Staverley

Bondmaster

IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield

Contact: Mr Andy Kular T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org

Acid Etch Inspection Hardness Testing Conductivity Testing Ultrasonic Testing of

PT Rail Upgrade 26 week

NDT/Inspection Training Programme


19


Training Organisation Contact Method(s) S9 1XH

Wrought Plate including Thickness Gauging (ISO 20807)

Anodic Testing MT Rail Upgrade

BGAS Transition to PCN Weld Inspector level 2

Infrared Thermography level 1 (SNT‐TC‐1A)


T: +44 (0) 1603 260148. E: [email protected] E: [email protected] W: www.isandt.co.uk

Infrared Thermography (Aero)

Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP

Contact: Ms N Dodsley T: +44 (0) 1226 765 769 E: nicola@lavender‐ndt.com W: www.lavender‐ndt.com

Eddy Current Testing of Non‐Ferromagnetic Tubes

Acid Etch Inspection Hardness Testing

Conductivity Testing Anodic Flaw Detection Composite Materials

(courses also available at TQCC/Lavender Greece)

NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton‐on‐Tees TS18 3HF

Contact: Melanie Holland T: +44 (0) 1642 604 661 E: [email protected]

Profile Radiography GE Rad View Software Specific Computed Radiography GE Rad View Software

Specific Ultrasonic Time of Flight Diffraction (Basic and

Advanced) Training Organisation Contact Method(s)

NDT Consultants Ltd Middlemarch House, Siskin Drive Coventry CV3 4FJ


Acid Etch Inspection Anodic Flaw

Detection Conductivity Testing Hardness Testing

Visual Inspection Coating Thickness

measurement Bond Testing

NDT Ltd Maltravers Road Sheffield South Yorkshire , S2 5AD

Contact: Mr S Sennett T: +44 (0) 114 272 7317 E: [email protected] W: www.ndt.ltd.uk

Ultrasonic Testing Thickness and Laminations ISO 20807

South West School of NDT Contact: Michelle Clapham Acid Etch Inspection


20


Training Organisation Contact Method(s) Merton House Croescadarn Close Pentwyn Cardiff, CF23 8HF

T: +44 (0) 292 054 0000 E: [email protected] W: www.swsndt.co.uk

Hardness Testing Conductivity Testing Anodic Testing Laser Shearography (Aero) Infrared Thermography (Aero)

Sonomatic Ltd Unit 1, Energy Development Centre, Claymore Drive, Bridge of Don, Aberdeen , AB23 8GD

Main Contact: Chris Stanton Contact: Donna Stewart T: +44 (0) 1224 823960 E: [email protected] E: [email protected] W: www.sonomatic.com

Ultrasonic Testing of Wrought Plate including

Thickness Gauging (ISO 20807)

Test NDT International Ltd 16 Tolsey Drive Hutton Preston Lancashire PR4 5SH

Contact: Richard/Catherine Harrison T: +44 (0) 1772 616913 E: [email protected] W: www.testndt.com

Ultrasonic Phased Array Aircraft Inspection Composite Bond Structure Inspection (Aerospace) Eddy Current Array Level 1 and 2

TQCC/Lavender Greece Z Pigis 51 382 22 Volos Greece

Contact: Athena Xirofotou T: +30 24210 59881 E: [email protected] W: www.ketepe‐ndt.com

UT Castings (SNT) RI/RT Castings (SNT)

TCS NDT 19 Weymouth Boulevard, Quinn’s Rocks, Perth WA Australia 6030

Contact: Alisa Hewling T: +61 (0) 415 573095 E: [email protected] W: www.tcsndt.com.au

Critical Ultrasonic Assessment of Welds Defects

Training Organisation Contact Method(s) Tri Service School of NDT NDES, RAF Wittering, Peterborough, Cambridgeshire PE8 6HB

Contact: Philip Byram T: +44 (0) 1780 417138 E: [email protected] E: 71irsqn‐[email protected]

10 week Aerospace NDT Technicians Course

TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road, Bucksburn Aberdeen, AB21 9BG


Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)


21


Training Organisation Contact Method(s)

TWI ‐ Training & Examination Services Granta Park Abington Cambridge CB21 6AL

Contact: Michal Skerik T: +44 (0) 1223 899 500 E: [email protected] W: www.twitraining.com





NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.

Contact: Sonny James T: (868) 653 9343 E: [email protected] W: www.learnndt.com


Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ

Contact: Suzanne Judge T: +44 (0) 1253 696400 E: info@cjis‐ltd.com W: www.talonndtblackpool.com


Testia Ltd Quadrant House, Celtic Springs, Coedkernew, Newport NP10 8FZ

Contact: Charlotte Smith T: +44 (0) 1633 715811 E: [email protected] W: www.testia.com

Magnetic Particle Testing EN 4179 Liquid Penetrant Testing EN 4179 Radiographic Testing EN 4179 Eddy Current Testing EN 4179 Ultrasonic Testing EN 4179


22


PART 3 Historically, a number of Approved Training Organisations have offered level 3 training courses. By definition, these courses must be tailored to meet the

needs of individual candidates. Please refer to the Foreword on page 2.

Note: The following organisations have been recognised by BINDT as providers of individually designed level 3 training packages.


23


Training Organisation Contact

IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield S9 1XH

Contact: Andy Kular T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org


T: +44 (0) 1603 260148. E: [email protected] E: [email protected] W: www.isandt.co.uk

Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP


South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff CF23 8HF

Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: [email protected] W: www.swsndt.co.uk

TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road Bucksburn Aberdeen AB21 9BG


TWI ‐ Training & Examination Services Granta Park Abington Cambridge CB21 6AL

Contact: Michal Skerik T: +44 (0) 1223 899 500 E: [email protected] W: www.twitraining.com




24



SGS (Shanghai) NDT Training & Examination Centre SGS‐CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road Pudong District Shanghai 201319 P.R. China

Contact: Shelley Xu T: +86 21 6119 6406 E: [email protected] W: www.sgs.com

ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia

Contact: Paul Grosser T: +61 3 9574 6144 E: [email protected] W: www.attar.com.au

Serco Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP

Contact: Deborah Stenson T: +44 (0)1332 264 782 E: [email protected]

WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC PO BOX 393179, Unit 2F‐A‐02, Empire Heights, Tower A, Business Bay, Dubai, UAE

Contact: Babu Sajeesh Kumar T: +971 4554 6284 T: +971 5624 28507 E: [email protected]

SETSCO Services PTE Ltd 18 Teban Gardens Crescent Singapore 608925

Contact: Sze Thiam Siong T: +65 6566 7777 E: [email protected] W: www.setsco.com

NDT Consultants Ltd Middlemarch House, Siskin Drive Coventry CV3 4FJ



25



African NDT Centre (Pty) Ltd 224 Witch‐Hazel Avenue Highveld Technopark Centurion South Africa

Contact: Mr W Claassens T: +27 (0) 12 665 3248 E: [email protected] W: www.andtc.com

African NDT Centre (Pty) Ltd Suite 403, Block 4 Island Circle Office Park 35‐37 Island Circle Road Riverhorse Valley Durban, South Africa

Contact: Mr W Claassens T: +27 31 569 5054 E: [email protected] W: www.andtc.com

LAVENDER INTERNATIONAL NDT University Business Park, Suite F. 15200 Middlebrook Dr. Houston Texas 77058 United States


AEROSPACE INSPECTION TRAINING LTD Units 9 & 10 Takeley Business Centre Dunmow Road, Takeley Bishops Stortford, CM22 6SJ

Contact: Samantha Wright T: +44 (0) 1279 870276 E: [email protected] E: [email protected] W: www.aerospacendt.co.uk

list of ndt & inspection approved training organisations

Documents