list of din standard

List of DIN standardsFrom Wikipedia, the free encyclopedia

Jump to: navigation, search

This is an incomplete list of DIN standards.

The "STATUS" column gives the latest known status of the standard. o If a standard has been withdrawn and no replacement specification is listed, either

the specification was withdrawn without replacement or a replacement specification could not be identified.

DIN standards that begin with "DIN V" ("Vornorm", meaning "pre-issue") are the result of standardization work, but because of certain reservations on the content or because of the divergent compared to a standard installation procedure of DIN, they are not yet published standards.

Contents

[hide]

1 DIN 1 to DIN 999 o 1.1 DIN 1 to DIN 99 o 1.2 DIN 100 to DIN 199 o 1.3 DIN 200 to DIN 299 o 1.4 DIN 300 to DIN 399 o 1.5 DIN 400 to DIN 499 o 1.6 DIN 500 to DIN 599 o 1.7 DIN 600 to DIN 699 o 1.8 DIN 700 to DIN 799 o 1.9 DIN 800 to DIN 899 o 1.10 DIN 900 to DIN 999

2 DIN 1000 to DIN 9999 o 2.1 DIN 1000 to DIN 1999 o 2.2 DIN 2000 to DIN 2999 o 2.3 DIN 4000 to DIN 4999 o 2.4 DIN 5000 to DIN 5999 o 2.5 DIN 6000 to DIN 6999 o 2.6 DIN 7000 to DIN 7999 o 2.7 DIN 8000 to DIN 8999 o 2.8 DIN 9000 to DIN 9999

3 DIN 10000 to DIN 19999 o 3.1 DIN 10000 to DIN 10999 o 3.2 DIN 11000 to DIN 11999

o 3.3 DIN 12000 to DIN 12999 o 3.4 DIN 13000 to DIN 13999 o 3.5 DIN 14000 to DIN 14999 o 3.6 DIN 15000 to DIN 15999 o 3.7 DIN 16000 to DIN 16999 o 3.8 DIN 17000 to DIN 17999 o 3.9 DIN 18000 to DIN 18999 o 3.10 DIN 19000 to DIN 19999

4 DIN 20000 to DIN 29999 o 4.1 DIN 24000 to DIN 24999 o 4.2 DIN 28000 to DIN 28999

5 DIN 30000 to DIN 39999 o 5.1 DIN 31000 to DIN 31999

6 DIN 40000 to DIN 49999 7 DIN 50000 to DIN 59999 8 DIN 60000 to DIN 69999 9 DIN 70000 to DIN 79999 10 External links

[edit] DIN 1 to DIN 999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG

REPLACEMENT

DIN 1Cone Pins, untempered

Withdrawn DIN EN 22339 ISO 2339

DIN 3Standard measurements

Withdrawn

DIN 5

Technical drawings - Axonometric projections, Isometric projection

Withdrawn

DIN ISO 5456-1, DIN ISO 5456-2,DIN ISO 5456-3, DIN ISO 5456-4

ISO 5456-1, ISO 5456-2,ISO 5456-3, ISO 5456-4

DIN 5-10 Technical Withdrawn DIN ISO 10209-2 ISO 10209-2

http://en.wikipedia.org/wiki/List_of_DIN_standards





drawings - projections, terms

DIN 6

Projection displays in Normal, views and special presentations

Withdrawn DIN ISO 128, DIN EN ISO 128 ISO 128

DIN 7 Parallel Pins Withdrawn DIN EN 22338 ISO 2338

DIN 11

Whitworth pipe threads 1/4"-6" Thread diameter, sizes, teaching information

Withdrawn

DIN 13-1

ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm

Active

DIN 13-2 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2

Active

mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm

DIN 13-3

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

Active

DIN 13-4

ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm

Active

DIN 13-5 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch

Active

threads; nominal diameter from 7,5 mm to 200 mm

DIN 13-6

ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm

Active

DIN 13-7

ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm

Active

DIN 13-8 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300

Active

mm

DIN 13-9


Active

DIN 13-10


Active

DIN 13-11


Active

DIN 13-12

ISO general purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and fine pitch threads Selected diameters and pitches

Active

DIN 13-13

ISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

Active

DIN 13-19

ISO general purpose metric screw threads - Part 19: Nominal profiles

Active

DIN 13-20

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance

Active

classes; nominal sizes from 1 mm to 68 mm

DIN 13-21

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm

Active

DIN 13-22

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm

Active

DIN 13-23

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine

Active

pitch threads with the preferred tolerance classes; Nominal diameter from 53 mm to 110 mm

DIN 13-24


Active

DIN 13-25


Active

DIN 13-26


Active

DIN 13-28

ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles

Active

DIN 13-50

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw

Active

threads

DIN 13-51

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

Active

DIN 13-52

ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile

Active

DIN 76-1

Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1

Active

DIN 76-2 Thread run-outs and thread

Active

undercuts for pipe threads conforming to ISO 228 part 1

DIN 76-3

Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch

Active

DIN 78Protrusions of bolt ends

ActiveDIN EN ISO 4753 (governs thread ends for bolts assembled with hexagon slotted nuts)

ISO 4753

DIN 84

Product grade A slotted cheese head screws

Withdrawn DIN EN ISO 1207 ISO 1207

DIN 85Product grade A slotted pan head screws


DIN 93Tab washers with long tab


DIN 94 Split pins Withdrawn DIN EN ISO 1234 ISO 1234

DIN 95 Slotted Raised Countersunk

Active

(Oval) Head Wood Screws

DIN 96Slotted Round Head Wood Screws

Active



REPLACEMENT

DIN V 105-1

Clay masonry units - Part 1: Solid and hollow bricks with density classes of 1,2

WithdrawnDIN V 105-100, DIN EN 771-1

EN 771-1

DIN V 105-2

Clay masonry units - Part 2: Solid and hollow bricks with density classes equal 1.0

WithdrawnDIN V 105-100, DIN EN 771-1

EN 771-1

DIN 105-3 Clay masonry units - Part 3: Tile and high strength-high-strength

Withdrawn DIN V 105-100, DIN EN 771-1

EN 771-1






clinker

DIN 105-4

Clay masonry units - Part 4: Ceramic bricks

WithdrawnDIN V 105-100, DIN EN 771-1,DIN EN 772-7

EN 771-1, EN 772-7

DIN 105-5

Clay masonry units - Part 5: Lightweight long-hole brick and light long-hole brick panels

Active

DIN V 105-6

Clay masonry units - Part 6: High precision units

Active

DIN V 105-100

Clay masonry units - Part 100: Clay masonry units with specific properties

Active

DIN 125 Washers; medium type, primarily for hexagon

Withdrawn DIN EN ISO 7089,DIN EN ISO 7090

ISO 7089,ISO 7090

bolts

DIN 125-1

Product grade A washers - with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

WithdrawnDIN EN ISO 7089,DIN EN ISO 7090

ISO 7089,ISO 7090

DIN 125-2

Product grade A washers - with a hardness up to 300 HV designed for use with hexagon head bolts and nuts


ISO 7089,ISO 7090

DIN 126

Product grade C washers - designed for use with hexagon head bolts and nut


DIN 127

Spring lock washers with square ends or tang ends

Withdrawn

DIN 128

Curved and wave spring lock washers

Withdrawn

DIN 137

Spring washers, curved or wave

Withdrawn


DIN TITLE STATUS DIN

REPLACEMENT OTHER ORG

REPLACEMENT

DIN 201

Technical drawings; Hatchings; Representation of cutting edges and materials

Withdrawn DIN ISO 128-50 ISO 128-50

DIN 209

Machine Reamers with Screwed-on Blades

Active

DIN 267-1

Fasteners - Part 1: Technical delivery conditions; General requirements

Withdrawn

DIN 267-2 Fasteners - Part 2: Technical

Active DIN EN ISO 4759-1 ISO 4759-1






delivery conditions; Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Types and Dimensional Accuracy

DIN 267-3

Fasteners - Part 3: Technical delivery conditions; Property classes for carbon steel and alloy steel bolts and screws; Conversion of property classes

Withdrawn DIN EN ISO 898-1 ISO 898-1

DIN 267-4

Fasteners - Part 4: Technical delivery conditions; Property classes for nuts (previous classes)


DIN 267-5 Fasteners – Part 5: Technical delivery conditions; Acceptance inspection;


modified version of ISO 3269, 1984 edition

DIN 267-6

Fasteners - Part 6: Technical delivery conditions; Designs and accuracy of measurement for product grade F

Active

DIN 267-7

Fasteners - Part 9: Technical delivery conditions; Bolts made of unalloyed or low-alloy steels


DIN 267-9

Fasteners - Part 9: Technical delivery conditions; Components with Electroplated Coatings


DIN 267-10 Fasteners - Part 10: Technical delivery conditions; Hot dip


galvanized parts

DIN 267-11

Fasteners - Part 11: Technical delivery conditions (with additions to ISO 3506); Corrosion-resistant stainless steel fasteners

Active

DIN 267-12

Fasteners - Part 12: Technical delivery conditions; Self-tapping screws


DIN 267-13 Fasteners - Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature

Active

Strength

DIN 267-15

Fasteners - Part 15: Technical delivery conditions; Prevailing torque type nuts

Withdrawn

DIN EN ISO 2320,DIN EN ISO 3506-1,DIN EN ISO 3506-2,DIN EN ISO 3506-3

ISO 2320,ISO 3506-1,ISO 3506-2,ISO 3506-3

DIN 267-18

Fasteners - Part 18: Technical delivery conditions; Components made of Non-ferrous Metals


DIN 267-19

Fasteners - Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws

WithdrawnDIN EN ISO 26157-1,DIN EN ISO 26157-3

ISO 6157-1,ISO 6157-3

DIN 267-20

Fasteners - Part 20: Technical delivery conditions; Surface discontinuities on nuts

WithdrawnDIN EN ISO 6157-2,DIN EN ISO 10484,DIN EN ISO 10485

ISO 6157-2,ISO 10484,ISO 10485

DIN 267-21 Fasteners - Part 21:

Withdrawn DIN EN ISO 6157-2,DIN EN ISO 10484,

ISO 6157-2,ISO 10484,

Technical delivery conditions; Widening test on nuts

DIN EN ISO 10485 ISO 10485

DIN 267-23

Fasteners - Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)


DIN 267-24

Fasteners - Part 24: Technical delivery conditions; Property classes for nuts (Hardness classes)

Active

DIN 267-25

Fasteners - Part 25: Technical delivery conditions; Torsion testing of M1 to M10 bolts and screws

Withdrawn DIN EN 20898-7 EN 20898-7

DIN 267-26 Fasteners - Part 26: Technical delivery conditions;

Active

Conical spring washers for bolt/nut assemblies

DIN 267-27

Fasteners - Part 27: Technical specifications; Steel screws, bolts and studs with adhesive coating

Active

DIN 267-28

Fasteners - Part 28: Technical specifications; Steel screws, bolts and studs with locking coating

Active

DIN 267-29

Fasteners - Part 29: Technical specifications; Product grades for parts for bolted connections for use at temperatures ranging from -200°C to +700°C

Active

DIN 267-30 Fasteners - Part 30: Technical specifications; Metric thread

Active

rolling screws of property class 10.9

DIN 276-1

Building costs; Part 1: Building construction

Active

DIN 276-2

Building costs; Part 2: Classification of cost

Active

DIN 276-3

Building costs; Part 3: Ascertainment of cost

Active



REPLACEMENT

DIN 315Wing nuts with rounded wings

Active

DIN 316Wing screws with rounded wings

Active

DIN 323-1 Preferred Numbers and Series of Preferred Numbers; Basic Values,

Active






Calculated Values, Rounded Values

DIN 323-2

Preferred Numbers and Series of Preferred Numbers; Introduction

Active

DIN 332-1

60° centre holes; types R, A, B, and C

Active

DIN 332-2

Center holes 60° with thread for shaft ends for rotating electrical machines

Active

DIN 332-4

Centre holes for rail vehicles axles

Active

DIN 332-7

Machine tools; 60° centre holes; dimensioning

Active

DIN 332-8

Centre holes 90°, form S; dimensions, determination process

Active

DIN 332-10

Center Holes; Indications on Technical Drawings

Withdrawn DIN ISO 6411 ISO 6411

DIN 338

Parallel shank twist drills, jobber series

Active



REPLACEMENT

DIN 404Slotted capstan screws

Active

DIN 406-10

Engineering drawing practice; dimensioning; concepts and general principles

Active

DIN 406-11

Engineering drawing practice; dimensioning; principles of application

Active

DIN 406-12

Engineering drawing practice; dimensioning; tolerancing of linear and

Active






angular dimensions (modified version of ISO 406:1987)

DIN 417Slotted set screws with long dog point


DIN 427

Slotted headless screws with chamfered end


DIN 428Hexagon nuts, Grade C


DIN 433

Washers for use with cheese head screws


DIN 433-1

Product grade A washers - with a hardness up to 250 HV designed for use with cheese head screws


DIN 433-2

Product grade A washers - with a hardness up to 300 HV designed for use with


cheese head screws

DIN 438Slotted set screws with cup point


DIN 439Hexagon thin nuts

WithdrawnDIN EN ISO 4035, DIN EN ISO 4036, DIN EN ISO 8675

ISO 4035, ISO 4036,ISO 8675

DIN 439-1

Unchamfered hexagon thin nuts - Product grade B


DIN 439-2

Chamfered hexagon thin nuts - Product grades A and B

WithdrawnDIN EN ISO 4035, DIN EN ISO 8675

ISO 4035, ISO 8675

DIN 440Washers for use in timber constructions


DIN 444 Eyebolts Active

DIN 461

Graphical Representation in Systems of Coordinates

Active

DIN 462 Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner

Active

according to DIN 1804

DIN 464Knurled thumb screws, high type

Active

DIN 466Knurled nuts, high type

Active

DIN 467Knurled nuts, low type

Active

DIN 471

Circlips (retaining rings) for shafts; Normal type and heavy type

Active

DIN 476 Paper sizes Withdrawn DIN EN ISO 216 ISO 216

DIN 476-2

Trimmed Sizes of Paper - C Series

Active

DIN 477 DIN 479Square head bolts with short dog point

Active



REPLACEMENT

DIN 522 Metal washers; technical







delivery conditions

DIN 551

Slotted set screws with flat point


DIN 553

Slotted set screws with cone point


DIN 555

M5 to M100x6 hexagon nuts - Product grade C


DIN 558Hexagon head screws


DIN 580

Collar eyebolts for lifting purposes

Active



REPLACEMENT

DIN 601 M5 to M52 hexagon head bolts; product







grade C

DIN 603

Mushroom head square neck bolts

Active

DIN 609

Hexagon fits bolts with long thread

Active

DIN 625-1

Rolling bearings; single row radial contact ball bearings

Active

DIN 625-3

Rolling bearings; double row radial contact ball bearings

Active

DIN 625-4

Rolling bearings; radial contact groove ball bearings with flanged outer ring

Active

DIN 653 Knurled thumb

Active

screws, low type

DIN 678-1Envelopes - Part 1: Sizes

Active

DIN 678-2

Envelopes - Part 2: Envelopes for Processing in Enveloping Machines, Size C6 to C4

Active



REPLACEMENT

DIN 763

Tested, non-calibrated, long-link round steel chains

Active

DIN 764-1

Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d

Active






DIN 764-2

Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d

Active

DIN 766

Calibrated and tested grade 3 round steel link chains

Active

DIN 799-1Foundation Blocks

Active




REPLACEMENT

DIN 820-1Standards Work - Part 1: Principles

Active

DIN 820-2

Standardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part lists

Active

DIN 820-3 Standardization - Part 3:

Active






Concepts

DIN 820-4

Standardization - Part 4: Working procedure

Active

DIN 820-11

Standardization - Part 11: Presentation of Standards concerning safety regulations which are VDE-Specifications or VDE-Guidelines

Active

DIN 820-12

Standardization - Part 12: Presentation of standards concerning safety regulations

Active

DIN 820-13

Standardization - Part 13: Adoption of European documents of CEN, CENELEC and of ETSI; Concepts and presentation

Active

DIN 820-15 Standardization - Part 15:

Active

Implementation of ISO and IEC international documents; Concepts and presentation

DIN 820-120

Standardization - Part 120: Guidelines for the inclusion of safety aspects in standards (ISO/IEC Guide 51:1999)

Active

DIN 824

Technical drawings; Folding to filing size

Active

DIN 899

Hand Operated Wrenches and Sockets; Technical Specifications





REPLACEMENT

DIN 908

Hexagon socket screw plugs with parallel screw thread

Active






DIN 910Hexagon-duty hexagon head screw plugs

Active

DIN 911Hexagon Socket Screw Keys


DIN 912

Hexagon socket head cap screws (modified version of ISO 4762)


ISO 4762,ISO 21269

DIN 913

Hexagon socket set screws with flat point (ISO 4026 modified)


DIN 914

Hexagon socket set screws with cone point (ISO 4029 modified)


DIN 915

Hexagon socket set screws with full dog point


DIN 916

Hexagon socket set screws with cup point (ISO 4029 modified)


DIN 918

Fasteners; Terminology; Spelling of terms; Abbreviations

Active

DIN 918-3

Overview of European Standards for fasteners

Active

DIN 919-1

Technical Drawings; Wood Processing; Principles

Active

DIN 921

Slotted pan head screws with large head

Active

DIN 923Slotted pan head screws with shoulder

Active

DIN 929Hexagon weld nuts

Active

DIN 930

Fine thread pitch partially threaded screws

Withdrawn DIN 931-1, DIN 931-2

DIN 931-1 M1,6 to M39 hexagon head bolts - Product grades A and


B

DIN 931-2

M42 to M160x6 hexagon head bolts - Product grade B


DIN 933

M1,6 to M52 hexagon head screws thread up to the head - Product grades A and B


DIN 934

Hexagon nuts with metric coarse and fine pitch thread - Product classes A and B


ISO 4032,ISO 8673

DIN 935-1

Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B

Active

DIN 935-2 M42 to M160x6 hexagon head bolts; product

Active

grade B

DIN 935-3

Hexagon slotted nuts with metric coarse pitch thread - Product grade C

Active

DIN 936

M8 to M52 and M8x1 to M52x3 hexagon thin nuts; product grades A and B

Withdrawn

DIN 937Hexagon thin castle nuts

Withdrawn

DIN 938

Studs with a length of engagement equal to about 1 d

Active

DIN 939

Studs with a length of engagement equal to about 1,25 d

Active

DIN 946 Determination of coefficient of friction of bolt/nut assemblies under specified


conditions

DIN 960

M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and B


ISO 8765,ISO 8676

DIN 961

M8x1 to M52x3 hexagon head bolts with fine pitch thread - Product grades A and B


DIN 962Designation system for fasteners

Active

DIN 963

Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972)


DIN 964

Slotted raised countersunk oval head screws


DIN 965 Cross Withdrawn DIN EN ISO 7046-1, ISO 7046-1,

recessed countersunk flat head screws

DIN EN ISO 7046-2 ISO 7046-2

DIN 966

Cross recessed raised countersunk head screws


DIN 970

Hexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modified


DIN 971-1

Style 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8


DIN 971-2

Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12


DIN 972 M5 to M39 hexagon nuts; style 1;


product grade C (modified version of ISO 4034)

DIN 975 Threaded rods Withdrawn

DIN 976-1Metric thread stud bolts

Active

DIN 976-2

Metric interference-fit thread stud bolts

Active

DIN 977Hexagon weld nuts with flange


DIN 979

Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B

Active

DIN 980

All-metal prevailing torque type hexagon nuts


ISO 7042,ISO 10513

DIN 981

Locknuts for use with rolling bearings

Active

DIN 982

Prevailing torque type hexagon nuts with nonmetallic insert


ISO 7040,ISO 10512

DIN 983

Retaining rings with lugs for use on shafts (external circlips)

Active

DIN 985

Prevailing torque type hexagon thin nuts with nonmetallic insert


DIN 988

Shim rings and supporting rings

Active





REPLACEMENT

DIN 1301-1Units - Part 1: Names and Symbols

Active

DIN 1301-2 Units - Part 2: Submultiples

Active






and Multiples for General Use

DIN 1301-3

Units - Part 3: Conversions of Units No Longer To Be Used

Active

DIN 1302

General Mathematical Symbols and Concepts

Active

DIN 1303

Vectors, matrices, tensors; symbols and concepts

Active

DIN 1304-1

Letter symbols for physical quantities - Part 1: Symbols for general use

Active

DIN 1304-2

Letter symbols for physical quantities - Part 2: Symbols for use in meteorology and geophysics

Active

DIN 1304-3 Letter symbols for physical quantities - Part 3: Symbols for use in electric power

Active

engineering

DIN 1304-5

Letter symbols for physical quantities - Part 5: Symbols for use in fluid mechanics

Active

DIN 1304-8

Letter symbols for physical quantities - Part 9: Symbols for use in the field of static converters using semiconductor devices

Active

DIN 1304-9

Letter symbols for physical quantities - Part 9: Symbols for equivalent circuits of piezoelectric crystals

Active

DIN 1311-1

(Mechanical) vibrations, oscillations and vibration systems - Part 1: Basic concepts, survey

Active

DIN 1311-2 (Mechanical) vibrations, oscillations and

Active

vibration systems - Part 2: Linear vibration systems with single degree of freedom

DIN 1311-3

(Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom

Active

DIN 1311-4

Vibration; Vibrating Continua, Waves

Active

DIN 1313

Physical Quantities and Equation; Concepts, Methods of Writing

Active

DIN 1315Angle; Concepts, Units

Active

DIN 1318 Loudness Level Active

DIN 1319-1 Fundamentals of Metrology –

Active

Part 1: Basic Terminology

DIN 1319-2

Basic Concepts in Metrology – Part 2: Terminology Related To Measuring Equipment

Active

DIN 1319-3

Basic Concepts in Metrology – Part 3: Terminology Relating To the Uncertainty of Measurement and the Assessment of Measuring Instruments and Measuring Equipment

Active

DIN 1319-4

Basic Concepts in Metrology – Part 4: Treatment of Uncertainties in the Evaluation of Measurements

Active

DIN 1320Acoustics; Terminology

Active

DIN 1324-1Electromagnetic Field - Part 1. State Quantities

Active

DIN 1324-2

Electromagnetic Field - Part 2. Material Quantities

Active

DIN 1324-3

Electromagnetic Field - Part 3. Electromagnetic Waves

Active

DIN 1325-1

Vocabulary for value management, value analysis and functional analysis - Part 1: Value analysis and functional analysis

Active

DIN 1325-2

Value Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value Management

Active

DIN 1332Acoustics; Symbols


DIN 1333Presentation of Numerical Data

Active

DIN 1338Writing and Typesetting of Formulae

Active

DIN 1355-1

Time; Calendar, Numbering of Weeks, Date of Day, (Clock) Time

Withdrawn

DIN 1421

Arrangement and Numbering in Texts; Clauses, Paragraphs, Enumerations

Active

DIN 1422-1

Publications in Sciences, Technology, Economy and Administration; Presentation of Manuscripts and Typoscripts

Active

DIN 1422-2

Publications in Sciences, Technology, Economy and Administration; Presentation of Clean Copies for Reprographic Use

Active

DIN 1422-3

Publications in Sciences, Technology, Economy and Administration; Typographical Presentation

Active

DIN 1422-4

Publications in Sciences, Technology, Economy and Administration; Presentation of Scientific and Technical Reports

Active

DIN 1440Medium type washers for pins


DIN 1443Clevis pins without head


DIN 1444Clevis pins with head


DIN 1451-1

Lettering - Linear-Antiqua without serifes – General

Active

DIN 1451-2

Typefaces - lineal Linear-Antiqua; lettering for transportation

Active

DIN 1451-3

Lettering - Linear-Antiqua without serifes; lettering for printing

Active

DIN 1451-4 Typefaces - lineal Linear-Antiqua;

Active

stenciled lettering for engraving and other processes

DIN 1463-1

Guidelines for the Establishment and Development of Thesauri; Monolingual Thesauri

Active

DIN 1463-2

Guidelines for the Establishment and Development of Thesauri; Multilingual Thesauri

Active

DIN 1470

Grooved Pins, Full Length Parallel-grooved with Pilot


DIN 1471Grooved Pins, Full Length Taper-grooved


DIN 1472Grooved Pins, Half Length Taper-grooved


DIN 1473 Grooved Pins, Full Length Parallel-


grooved with Chamfer

DIN 1474

Grooved Pins, Half Length Reverse-grooved


DIN 1475Grooved Pins, Third Length Centre-grooved


DIN 1476Round Head Grooved Pins


DIN 1477Countersunk Head Grooved Pins


DIN 1481

Spring-Type Straight Pins (Roll Pins) - Heavy Type


DIN 1505-1

Bibliographic references to documents - Part 1: Full References to Printed and Published Documents

Active

DIN 1505-2

Bibliographic references to documents - Part 2: Rules for Citing

Active

DIN 1505-3

Bibliographic references to documents - Part 3: Indexes of cited documents (bibliographies)

Active

DIN 1511

Pattern Equipment for Foundries; Production and Quality

Withdrawn DIN EN 12890 EN 12890

DIN 1530-1

Tools for moulding - Part 1: Ejector pins with cylindrical head

Active

DIN 1530-2

Tools for moulding - Part 2: Shouldered ejector pins

Active

DIN 1530-3

Tools for moulding - Part 3: Ejector pins with conical head

Active

DIN 1587Hexagon domed cap nuts

Active

DIN 1707

Soft Solders; Composition, Technical Delivery Condition


DIN 1712 Part 1

Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting – Specifications


DIN 1712 Part 3

Aluminium; Half-Finished Products


DIN 1783

Strips, Plates and Sheets of Aluminium and Wrought


DIN 1786

Seamless Drawn Copper Tubes for Piping Systems


DIN 1798

Round Rod of Aluminium (Highest Grade Aluminium)


DIN 1804

Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread

Active

DIN 1810 Hook wrenches Active

DIN 1816 Round Nut with Set Pin Holes Inside; ISO

Active

Metric Fine Thread

DIN 1912-1

Graphical Representation of Welded, Soldered and Brazed Joints


DIN 1912-2

Graphical Representation of Welded, Soldered and Brazed Joints


DIN 1912-4

Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams

Active

DIN 1912-5

Symbolic Representation on Drawings of Welded, Soldered and Brazed Joints


DIN 1960 Construction contract procedures (VOB) - Part A: General provisions relating to the award of

Active

construction contracts

DIN 1961

Construction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work

Active




REPLACEMENT

DIN 2112

Alphanumeric office machines - Alphanumeric keyboards, keyboard arrangement for manually operated typewriters


DIN 2127 Alphanumeric office machines; alphanumeric keyboards, keyboard arrangement for electro-mechanical operated







typewriters

DIN 2137-1

Text and office systems - Keyboards - Part 1: German keyboard for typewriters; key arrangement and allocation of characters to keys

Active

DIN 2137-2

Text and office systems - Keyboards - Part 2: German keyboard for data and text processing; Key arrangement and allocation of graphic characters to keys

Active

DIN 2137-6 Text and office systems - Keyboards - Part 6: German keyboard for data and text processing as well as for typewriters;

Active

Key arrangement and allocation of functions to keys

DIN 2137-10

Text and office systems - Keyboards - Part 10: German keyboard for data and text processing as well as for typewriters; Arrangement of key positions and key distances

Active

DIN 2137-11

Text and office systems - Keyboards - Part 11: German keyboard for data and text processing as well as for typewriters; Principles governing the allocation of characters or functions to keys and the placement of their symbols on the keys

Active

DIN 2137-12

Text and office systems - Keyboards - Part 12: German keyboard for data and text processing; Key arrangement and allocation for portable computers

Active

DIN 2342-1

Vocabulary of terminology; basic concepts

Active

DIN 2391-1

Seamless precision steel tubes - Part 1: Dimensions

Canceled DIN EN 10305-1 EN 10305-1

DIN 2391-2

Seamless precision steel tubes - Part 2: Technical delivery conditions

Canceled DIN EN 10305-1 EN 10305-1

DIN 2448 Seamless Steel Pipes and Tubes - Dimensions, Conventional Masses per

Canceled DIN EN 10220 EN 10220

Unit Length

DIN 2527

Blank flanges - Nominal pressure 6 to 100


DIN 2860

Capillary Fittings; Bends 180° of Copper

Withdrawn

DIN 2999-1

Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions


DIN 2999-2

Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and Use of Gauges


DIN 2999-3 Whitworth Pipe Threads for Tubes and Fittings;


Gauge Dimensions

DIN 2999-4

Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread


DIN 2999-5

Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads, Sizes


DIN 2999-6

Whitworth Pipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes





REPLACEMENT






DIN 4102-1

Fire behaviour of building materials and elements - Part 1: Classification of building materials - Requirements and testing

Active

DIN 4102-2

Fire Behaviour of Building Materials and Building Components - Part 2: Building Components; Definitions, Requirements and Tests

Active

DIN 4102-3

Fire Behaviour of Building Materials and Building Components - Part 3: Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests

Active

DIN 4102-4

Fire behaviour of building materials and elements - Part 4: Overview and design of classified building materials,

Active

elements and components

DIN 4102-5

Fire Behaviour of Building Materials and Building Components - Part 5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests

Active

DIN 4102-6

Fire Behaviour of Building Materials and Building Components - Part 6: Ventilation Ducts; Definitions, Requirements and Tests

Active

DIN 4102-7

Fire behaviour of building materials and elements - Part 7: Roofing - Concepts, requirements and testing

Active

DIN 4102-8

Fire behaviour of building materials and components -

Active

Part 8: Small scale test furnace

DIN 4102-9

Fire behaviour of building materials and elements - Part 9: seals for cable penetrations; concepts, requirements and testing

Active

DIN 4102-11

Fire behaviour of building materials and building components - Part 10: pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing

Active

DIN 4102-12

Fire behaviour of building materials and elements - Part 12: Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testing

Active

DIN 4102-13

Fire behaviour of building materials and elements - Part 13: Fire resistant glazing; concepts, requirements and testing

Active

DIN 4102-14

Fire behaviour of building materials and elements - Part 14: Determination of the burning behaviour of floor covering systems using a radiant heat source

Active

DIN 4102-15

Fire behaviour of building materials and elements - Part 15: "Brandschacht"

Active

DIN 4102-16

Fire behaviour of building materials and elements - Part 16: "Brandschacht" tests

Active

DIN 4102-17

Fire behaviour of building materials and elements - Part

Active

17: determination of melting point of mineral fibre insulating materials; concepts, requirements and testing

DIN 4102-18

Fire behaviour of building materials and components - Part 18: fire barriers, verification of automatic closure (continuous performance test)

Active

DIN 4102-22

Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design of partial safety factors

Active

DIN 4108-1

Thermal protection and energy economy in buildings - Part 1: Quantities and units

Active

DIN 4108-2

Thermal protection and

Active

energy economy in buildings - Part 2: Minimum requirements to thermal insulation

DIN 4108-3

Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions; Requirements and directions for design and construction

Active

DIN 4108-7

Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance

Active

DIN 4108-10

Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation

Active

materials - Factory made products

DIN 4150-1

Structural vibration - Part 1: Prediction of vibration parameters

Active

DIN 4150-2

Structural vibration - Part 2: Human exposure to vibration in buildings

Active

DIN 4150-3

Structural vibration - Part 3: Effects of vibration on structures

Active

DIN V 4701-10

Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation

Active

DIN V 4701-12

Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat

Active

generation and domestic hot water generation

DIN 4710

Statistics on German meteorological data for calculating the energy requirements for heating and air conditioning equipment

Active




REPLACEMENT

DIN 5008Rules for text presentation

Active

DIN 5031-1

Physics of radiation in the field of optics and illuminating engineering - Part 1: Quantities, symbols and units of radiation physics

Active

DIN 5031-2

Physics of radiation in the field of optics and illuminating engineering - Part 2:

Active






Evaluation of radiation by different detectors

DIN 5031-3

Physics of radiation in the field of optics and illuminating engineering - Part 3: Quantities, symbols and units of illuminating engineering

Active

DIN 5031-4

Physics of radiation in the field of optics and illuminating engineering - Part 4: Efficiencies

Active

DIN 5031-5

Physics of radiation in the field of optics and illuminating engineering - Part 5: Definitions for temperatures

Active

DIN 5031-6

Physics of radiation in the field of optics and illuminating engineering - Part 6: Pupil intensity as a measure of

Active

retinal illumination

DIN 5031-7

Physics of radiation in the field of optics and illuminating engineering - Part 7: Terms for wavebands

Active

DIN 5031-8

Physics of radiation in the field of optics and illuminating engineering - Part 8: Definitions and constants of radiation physics

Active

DIN 5031-9

Physics of radiation in the field of optics and illuminating engineering - Part 9: Definitions in the field of luminescence

Active

DIN 5031-10

Physics of radiation in the field of optics and illuminating engineering - Part 10: Photobiologically effective radiation, quantities, symbols and

Active

actions

DIN 5035-3

Artificial lighting - Part 3: Lighting of health care premises

Active

DIN 5035-6

Artificial lighting - Part 6: Measurement and evaluation

Active

DIN 5035-7

Artificial lighting - Part 7: Lighting of interiors with visual displays work stations

Active

DIN 5035-8

Artificial lighting - Part 8: Workplace luminaries - Requirements, recommendations and proofing

Active

DIN 5145Plane irons for wood smooth and for planes

Active

DIN 5146Curved irons for jack planes

Active

DIN 5406

Lockwashers and locking plates for use with rolling bearings

Active

DIN 5473Logic and set theory; symbols and concepts

Active

DIN 5474Signs in mathematical logic

Withdrawn DIN 5473

DIN 5475-1

Complex quantities; nomenclature

Withdrawn DIN 5483-3

DIN 5483-1

Time-dependent quantities - Part 1: Terms for the time-dependency

Active

DIN 5483-2

Time-dependent quantities - Part 2: Letter symbols

Active

DIN 5483-3

Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities

Active

DIN 5486Notation of matrices

Withdrawn DIN 1303

DIN 5487

Fourier-, Laplace- and Z-transformation; symbols and concepts

Active

DIN 5489 Directions and Withdrawn DIN EN 60375 EN 60375

signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagrams

DIN 5493-2

Logarithmic quantities and units - Part 2: Logarithmic ratios, levels in nepers and decibels

Active




REPLACEMENT

DIN 6319

Spherical washers and conical seats

Active

DIN 6325

Parallel Pins, Hardened; Tolerance Zone m6


DIN 6340Washers for clamping devices

Active

DIN 6738 Paper and paper board - Lifespan

Active






classes

DIN 6776Technical drawings, labeling


DIN 6797Toothed lock washers

Withdrawn

DIN 6798Serrated lock washers

Withdrawn

DIN 6799

Lock washers (retaining washers) for shafts

Active

DIN 6880

Bright Key Steel; Dimensions, Permissible Variations, Weights

Active

DIN 6885-1

Drive Type Fastenings without Taper Action – Part 1: Parallel Keys, Keyways, Deep Pattern

Active

DIN 6885-2

Drive Type Fastenings without Taper Action – Part 2: Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application

Active

DIN 6885-3

Drive Type Fastenings without Taper Action – Part 3: Parallel Keys, Shallow Pattern, Dimensions and Application

Active

DIN 6900Screw and Washer Assemblies


DIN 6901

Tapping screw and washer assemblies


DIN 6902 Plain washers for


screw and washer assemblies

DIN 6903

Plain washers for tapping screw and washer assemblies


DIN 6912

Hexagon socket thin head cap screws with pilot recess

Active

DIN 6914

High-strength hexagon head bolts with large widths across flats for structural steel bolting


DIN 6916

Round washers for high-strength structural steel bolting

Withdrawn

DIN 6921Hexagon flange bolts


DIN 6922 Hexagon flange bolts


with reduced shank

DIN 6923Hexagon nuts with flange


DIN 6924

Prevailing torque type hexagon nuts with nonmetallic insert


ISO 7040,ISO 10512

DIN 6925

Prevailing torque type all-metal hexagon nuts


ISO 7042,ISO 10513

DIN 6926

Prevailing torque type hexagon nuts with flange and with non-metallic insert

WithdrawnDIN EN 1663, DIN EN 1666

ISO 7043 (modified), ISO 12125 (modified)

DIN 6927

Prevailing torque type all-metal nuts with flange


ISO 7044 (modified),ISO 12126 (modified)







REPLACEMENT

DIN 7045

Pan head screws with type H or type Z cross recess - product grade A

Active

DIN 7245

Saw blades for web saws

Active

DIN 7337

Break mandrel blind rivets

Withdrawn

DIN EN ISO 14589, DIN EN ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN ISO 15981, DIN EN ISO 15982, DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584

ISO 14589, ISO 15977, ISO 15978, ISO 15979, ISO 15980, ISO 15981, ISO 15982, ISO 15983, ISO 15984, ISO 16582, ISO 16583, ISO 16584

DIN 7343

Spiral Pins; Normal Type


DIN 7344

Spiral Pins; Heavy Duty Type


DIN 7346

Spring-Type Straight Pins; (Roll Pins) Light-weight Type


DIN Plain Active


7349

Washers for Bolts with Heavy Clamping Sleeves

DIN 7500-1

Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements

Withdrawn ISO 7085

DIN 7500-2

Thread rolling screws for ISO metric thread; guideline values for hole diameters

Active

DIN 7504

Self-drilling screws with tapping screw thread - Dimensions, requirements and testing

Withdrawn DIN EN ISO 10666, DIN EN ISO 15480, DIN EN ISO 15481, DIN EN ISO 15482, DIN EN ISO 15483

ISO 10666, ISO 15480, ISO 15481, ISO 15482, ISO 15483

DIN 7513

Hexagon head and slotted head thread cutting screws - Dimensions,

Active

requirements and testing

DIN 7516

Cross recessed head thread cutting screws - Dimensions, requirements and testing

Active

DIN 7603

Ring seals and gaskets

Active

DIN 7962

Cross recesses for screws; (modified version of ISO 4757)


DIN 7970

Threads and thread ends for tapping screws (modified version of ISO 1478)


DIN 7971

Slotted pan head tapping screws


DIN 7972

Slotted countersunk head tapping screws


DIN 7973

Slotted raised countersunk head tapping screws


DIN 7977

Taper Pins with Thread Ends and Constant Point Lengths


DIN 7978

Taper Pins with Internal Thread


DIN 7979

Parallel Pins with Internal Thread


ISO 8733,ISO 8735

DIN 7980

Spring lock washers with square ends for cheese head screws

Withdrawn

DIN 7981

Cross recessed pan head tapping screws


DIN 7982

Cross recessed countersunk head tapping screws


DIN 7983

Countersunk (Flat) Head Tapping Screws with Cross Recess


DIN 7984

Hexagon socket thin head cap screws

Active

DIN 7985

Cross recessed raised cheese head screws


DIN 7991

Hexagon socket countersunk head cap screws





REPLACEMENT

DIN 8074Polyethylene (PE) pipes – Dimensions

Active

DIN 8075 Polyethylene (PE) pipes - PE 63, PE 80, PE 100, PE-HD - General quality

Active






requirements, testing

DIN 8513-1

Brazing and Braze Weld Filler Metals; Copper Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery


DIN 8513-2

Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Silver; Composition, Use, Technical Conditions of Delivery


DIN 8513-3

Brazing filler metals; silver brazing filler metals containing not less than 20 % of silver; composition, application, technical delivery conditions


DIN 8513-4

Brazing and Braze Weld Filler Metals; Aluminium-Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery


DIN 8513-5

Brazing filler metals; Nickel base filler metals for high temperature brazing; Application, composition, technical delivery conditions


DIN 8580

Manufacturing processes - Terms and definitions, division

Active

DIN 8806-1

Narrow band saw blades for woodworking; dimensions

Active



REPLACEMENT






DIN 9021

Plain washers with large outside diameter

WithdrawnDIN EN ISO 7093-1, DIN EN ISO 7093-2

ISO 7093-1, ISO 7093-2




REPLACEMENT

DIN 10504

Food hygiene - Lamps for the lighting of meat and meat products

Withdrawn




REPLACEMENT

DIN 11850

Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials

Active














REPLACEMENT

DIN 12950-1

Laboratory furniture; safety cabinets for microbiological and biotechnological work; safety requirements, tests

Withdrawn

DIN 12950-2

Laboratory furniture; safety cabinets for microbiological and biotechnological work; containment of class 1 and class 2 cabinets, microbiological test

Withdrawn

DIN 12950-10

Laboratory furniture; safety cabinets for microbiological and biotechnological and biotechnological work; requirements and testing

Withdrawn












REPLACEMENT

DIN 13080

Division of hospitals into functional areas and functional sections

Active

DIN 13260-2

Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuum

Active



REPLACEMENT

DIN 14090Areas for the fire brigade on premises

Active







DIN 14096-1

Fire precaution regulation - Part 1: General and part A (placard); rules for drafting and placarding

Active

DIN 14096-2

Fire precaution regulation - Part 2: Part B (for persons without special tasks of fire prevention and fire fighting); rules for drafting

Active

DIN 14096-3

Fire precaution regulation - Part 3: Part C (for persons with special tasks of fire prevention and fire fighting); rules for drafting

Active

DIN 14210Water pool for firefighting

Active

DIN 14406-4

Portable fire extinguishers - Part 4: Maintenance

Active

DIN 14503

Trailers for firefighting purposes, two-wheeled; general requirements

Withdrawn DIN 14521

DIN 14505

Firefighting and rescue service vehicles - Vehicles for roller containers - General requirements

Active

DIN 14507

Rescue service vehicles - Vehicles for roller containers - General requirements

Active

DIN 14520Trailers for portable fire pumps

Withdrawn

DIN 14521

Firefighting - Trailer with removable foam-water monitor

Active

DIN 14530-5

Fire fighting vehicles - Part 5: Group pumping appliance LF 10/6, Group pumping appliance for rescue operations HLF 10/6

Active

DIN 14530-11

Fire fighting vehicles - Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16

Active

DIN 14530-16

Fire fighting vehicles - Part 16: Pumping appliance TSF

Active

DIN 14530-17

Fire fighting vehicles - Part 17: Pumping appliance TSF-W

Active

DIN 14530-21

Fire fighting vehicles - Part 21:

Active

Pump water tanker TLF 20/40, Pump water tanker TLF 20/40-SL

DIN 14530-22

Fire fighting vehicles - Part 22: TLF 16/24-TR

Active

DIN 14530-24

Fire fighting vehicles - Part 24: Small pumping appliance KLF

Active

DIN 14530-25

Fire fighting vehicles - Part 25: Pumping appliance STLF 10/6

Active

DIN 14555-1

Vehicles carrying tools and gears - Part 1: General requirements

Active

DIN 14555-3

Vehicles carrying tools and gears - Part 3: Emergency

Active

tender RW

DIN 14555-12

Vehicles carrying tools and gears - Part 12: Damage control tender GW-G

Active

DIN 14555-21

Vehicles carrying tools and gears - Part 21: GW-L1 for logistic tasks

Active

DIN 14555-22

Vehicles carrying tools and gears - Part 22: GW-L2 for logistic tasks

Active

DIN 14565Fire hose tender; Type SW 2000-TR

Withdrawn

DIN 14701-1

Turntable ladders and similar fire fighting vehicles; Purpose, concepts, safety equipment, requirements


DIN 14701-2

Turntable ladders and similar fire fighting vehicles; Turn table ladders, engine driven


EN 14043, EN 14044

DIN 14701-3

Turntable ladders and similar fire fighting vehicles; Rescue baskets


DIN 14702

Turntable ladder DL 16-4, hand operating

Active

DIN 14703Trailer Ladder AL 16-4

Active

DIN 14710-1

Hook ladder, manufactured using wood; with hinged hook


DIN 14710-3

Hook light metal ladder

Withdrawn

DIN 14711-1

Scaling ladder; made from wood


DIN 14711-2

Scaling ladder; made from light metal


DIN 14711-3

Scaling ladder; socket rungs and socket parts


DIN 14713Folding ladder


DIN 14715-1

Three piece extension ladder made from wood


DIN 14715-2

Three piece extension ladder; made of light metal




REPLACEMENT

DIN 15018-2

Cranes; steel structures; principles of design and construction

Active






DIN 15721

Film 70 mm; projection reel

Active



REPLACEMENT

DIN 16518Classification of types

Active

DIN 16892

Cross-linked high-density polyethylene (PE-X) pipes - General quality requirements and testing

Active

DIN 16893

Cross-linked high-density polyethylene (PE-X) pipes – Dimensions

Active



REPLACEMENT

DIN 17410 Materials for permanent magnets:

Active











Technical conditions

DIN 17471Resistance alloys

Active



REPLACEMENT

DIN 18012

House service connections facilities - Principles for planning

Active

DIN 18013

Recesses for meter boards (electric meters)

Active

DIN 18014

Foundation earth electrode - General planning criteria

Active

DIN 18015-1

Electrical installations in residential buildings - Part 1: Planning principles

Active






DIN 18015-2

Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment

Active

DIN 18015-3

Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment

Active

DIN 18022

Domestic kitchens, bathrooms and WCs; design principles

Withdrawn

DIN 18024-1

Barrier-free built environment - Part 1: Streets, squares, paths, public transport, recreation areas and playgrounds - Design principles

Active

DIN 18024-2

Construction of accessible buildings - Part 2: Publicly accessible buildings and workplaces, design principles

Active

DIN 18065

Stairs in buildings - Terminology, measuring rules, main dimensions

Active

DIN 18379

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems

Active

DIN 18382 Contract procedures for building works - Part C: General technical specifications for building works; Low-

Active

voltage installation and medium-voltage installation with nominal voltages up to including 36 kV

DIN 18384

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems

Active

DIN 18800-1

Steel structures - Part 1: Design and construction

Active

DIN 18800-2

Steel structures - Part 2: Analysis of safety against buckling of linear members and frames

Active

DIN 18800-3

Steel structures - Part 3: Analysis of safety against buckling of plates

Active

DIN 18800-4

Steel structures - Part 4: Analysis of safety against buckling of shells

Active

DIN 18800-5

Steel structures - Part 5: Composite structures of steel and concrete - Design and construction

Active

DIN 18800-7

Steel structures - Part 7: Execution and constructor's qualification

Active




REPLACEMENT






DIN V 19222

Control technology – Terminology

Active

DIN 19225

Measurement and control; terminology and classification of controllers

Active

DIN 19226-1

Control technology - Part 1: General terms and definitions

Active

DIN 19226-2

Control technology - Part 2: Terms and definitions; dynamic systems behaviour

Active

DIN 19226-3

Control technology - Part 3: Terms and definitions of switching systems behaviour

Active

DIN 19226-4

Control technology - Part 4: Terms and definitions of

Active

control systems

DIN 19226-5

Control technology - Part 5: Functional terms

Active

DIN 19226-6

Control technology - Part 6: Terms and definitions of functional and constructional units

Active

DIN 19227-1

Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions

Active

DIN 19227-2

Control technology; graphical symbols and identifying letters for process control engineering; representation

Active

of details

DIN 19237

Measurement and control; control engineering vocabulary

Withdrawn

DIN 19226-3, DIN 19226-4,DIN 19226-5, DIN 19226-6

DIN 19227-1

Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions

Active

DIN 19227-2

Control technology; graphical symbols and identifying letters for process control engineering; representation of details

Active

DIN 19533 Pipe-lines of high-density PE (high-density polyethylene) and low-density PE (low density polyethylene)

Withdrawn DIN EN 12201-1,DIN EN 12201-2,DIN EN 12201-3,DIN EN 12201-5

EN 12201-1,EN 12201-2,EN 12201-3,EN 12201-5

for drinking water supply; pipes, pipe connections and fittings for pipe-lines

DIN 19704-1

Hydraulic steel structures - Part 1: Criteria for design and calculation

Active

DIN 19704-2

Hydraulic steel structures - Part 2: Design and manufacturing

Active

DIN 19704-3

Hydraulic steel structures - Part 3: Electrical equipment

Active




REPLACEMENT

DIN 24190 Ventilation and air

Withdrawn






conditioning - folded and welded rectangular sheet metal ducts

DIN 24340-2

Hydraulic valves; mounting surfaces and connecting plates for directional control valves

Active



REPLACEMENT

DIN 28610-1

Ductile iron pressure pipes with socket with cement-mortar lining for gas and water pipelines; dimensions and masses

Withdrawn DIN EN 545, DIN EN 969 EN 545, EN 969

DIN 28610-2 Ductile iron pressure pipes with







socket for gas and water pipelines rated for pressures over 4 bar up to and including 16 bar; dimensions and masses



REPLACEMENT

DIN 30722-1

Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel

Active

DIN 30722-2 Roller contact tipper vehicles, roller

Active






containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel

DIN 30722-3

Roller contact tipper vehicles, roller containers - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel

Active

DIN 30722-4

Roller containers for the transport on road and rail

Active







REPLACEMENT

DIN 31635

Conversion of the Arabic alphabet

Active




REPLACEMENT

DIN 40015

Frequency and wave bands

Active

DIN 40020

Guidelines for the user interface in multimedia equipment for general purpose use (IEC/TR 61997:2001)

Active

DIN 40050-9

Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipment

Active

DIN 40101-1

Graphical symbols for use on equipment

Withdrawn

DIN 40101-2

Graphical symbols for use on equipment;

Active







graphical symbols from ISO 7000 for electrical engineering

DIN 40108

Electric power technology - Current systems - Concepts, quantities, letter symbols

Active

DIN 40110-1

Quantities used in alternating current theory - Part 2: Two-line circuits

Active

DIN 40110-2

Quantities used in alternating current theory - Part 2: Multi-line circuits

Active

DIN 40146-1

Telecommunications - Part 1: Basic concepts

Active

DIN 40148-1

Transmission systems and two-ports; concepts and quantities

Active

DIN 40148-2

Transmission systems and two-ports; symmetry characteristics of linear two-ports

Active

DIN 40148-3

Transmission systems and two-ports; measures for

Active

attenuation

DIN 40200

Nominal value, limiting value, rated value, rating - concepts

Active

DIN 41215

Electrical communication engineering; electromagnetic relays, definitions

Withdrawn

DIN 41301

Electro Sheets; Magnetic Materials for Transformers

Withdrawn

DIN 41309-1

Small transformers and chokes; strip-wound cut cores; types SM, SE, SU, SG and S3U; dimensions materials

Withdrawn

DIN 41309-2

Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for one phase applications; types SM, SE, SU and SG

Withdrawn

DIN 41309-3

Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for three phase applications;

Withdrawn

type S3U

DIN 41426

Nominal values of resistors and capacitors

Withdrawn DIN IEC 60063 IEC 60063

DIN 41429

Colour code for fixed resistors


DIN 41524

Circular connectors for radio and associated sound equipment three and five-pole connectors

Withdrawn

DIN 41612-1

Two-part connectors for printed board, grid 2,54 mm; common mounting features; survey of types

Withdrawn DIN 41612-1 S1

DIN 41612-1 S1

Two piece connectors for printed circuits, grid 2,54 mm (0,1 in); general allusions


DIN 41612-2

Two-part connectors for printed boards; grid 2,54mm; dimensions of types B, C and D


DIN 41612-3

Two part connectors for printed boards; grid 2,54mm; dimensions of types F and G


DIN 41612-4

Two-part connectors for printed boards; grid 2,54mm, dimensions of type H


DIN 41612-5

Two-part connectors for printed boards; grid 2,54mm; ratings, requirements, tests


DIN 41612-6

Two-part connection for printed boards; grid 2.54mm; dimensions of types Q, R and S


DIN 41612-7

Two-part connectors for printed boards; grid 2,54 mm; dimensions of types U and V


DIN 41612-8

Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M


DIN 41612-8 S1

Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M; survey of special contracts for use with type M


DIN 41612-9

Two-part connectors for printed boards;


grid 2,54 mm; dimensions of type E

DIN 41612-10

Two-part connectors for printed boards; grid 2,54mm; gauges


DIN 41612-102

Two-part connectors for printed boards; dimensions for type X


DIN 41612-103

Two-part connectors for printed boards; dimensions of type M


DIN 41652-1

Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of types

Active

DIN 41652-2

Rack and panel connectors; trapezoidal, round contacts 1 mm; ratings, requirements, tests

Active

DIN 41750-1

Rack and panel connectors, trapezoidal, round contacts ø1 mm; common mounting

Active

features and dimensions; survey of types

DIN 41750-2

Rack and panel connectors, trapezoidal, round contacts ø1 mm; ratings, requirements, tests

Active

DIN 41750-3

Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type A; solder termination for free wiring

Active

DIN 41750-5

Rack and panel connectors, trapezoidal, round contacts ø1 mm; dimensions of type C; crimp termination for free wiring

Active

DIN 41782

Guidelines for the presentation of published data

Withdrawn DIN IEC 60747-2 IEC 60747-2

DIN 41786

Thyristors, definitions

Withdrawn

DIN 41855

Semiconductor devices and integrated circuits; kinds of devices and general terms

Withdrawn

DIN 41855-2

Semiconductor devices and integrated circuits; optoelectronic semiconductor devices; terms and definitions

Withdrawn

DIN 41868

Cases 10 A 3 and 10 B 3 for semiconductor devices; main dimensions

Withdrawn

DIN 41869-1

Case 23 A 3 for semiconductor devices; main dimensions

Withdrawn

DIN 41869-2

Cases 34 A 2 and 34 A 3 for semiconductor devices; main dimensions

Withdrawn

DIN 41869-3

Case 11 A 3 and 11 B 3 for semiconductor devices; main dimensions

Withdrawn

DIN 41869-4


Withdrawn

DIN 41869-5


Withdrawn

DIN 41869-6


Withdrawn

DIN 41869-7

Case type 15 for semiconductor devices; main dimensions

Withdrawn

DIN 41873

Cases type 5 for semiconductor devices and integrated circuits

Withdrawn

DIN 41876

Cases 18 A, B and C with 2 up to 4 terminals for semiconductor devices; main dimensions

Withdrawn

DIN 42400

Terminal markings for electrical equipment; general rules, alphanumeric system


DIN 42402

Terminal markings for power transformers and reactors

Active

DIN 42403

Terminal markings for power converters


DIN 42673-1

Totally enclosed fan-cooled three-phase induction

Withdrawn

motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions and relationship frame sizes-output ratings

DIN 42673-2

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"

Active

DIN 42673-3

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"

Active

DIN 42673-4

Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope

Active

dimensions

DIN 42961

Rating plates for rotating electrical machinery; design

Active

DIN 42973

Rated output values for rotating electrical machinery for continuous duty

Active

DIN 43700

Measurement and control - Measurement and control instruments for panel mounting - Nominal front- and cut-out-dimensions


DIN 43780

Electrical measuring instruments; direct acting indicating electrical measuring instruments and their accessories


DIN 43802-2

Line scales and pointers for indicating electrical measuring instruments; general requirements

Active

DIN 43802-3

Line scales and pointers for indicating electrical measuring instruments; designs and dimensions

Active

DIN 43802-4

Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering

Active

DIN 43807

Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor

Active

DIN 43856

Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams

Active

DIN 43856-2

Electricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995

Active

DIN 43870-1

Meter mounting boards; dimensions based on a grid system

Active

DIN 43870-2

Meter mounting boards; functional area

Active

DIN 43870-3

Meter panels; wirings

Active

DIN 44070-1

Meter mounting boards; dimensions based on a grid system

Active

DIN 44070-2

Meter mounting boards; functional area

Active

DIN 44070-3

Meter panels; wirings

Active

DIN 44070-4

Meter panels; cover for wiring

Active

DIN 44080

Thermistors; PTC, technical terms and tests

Withdrawn

DIN 44300

Information processing; vocabulary

Withdrawn

DIN 44300-1

Information processing - Concepts - General terms

Withdrawn

DIN 44300-2

Information processing - Concepts -

Withdrawn

Representation of data

DIN 44300-3

Information processing - Concepts - Data structures

Withdrawn

DIN 44300-4

Information processing - Concepts – Programming

Withdrawn

DIN 44300-5

Information processing - Concepts - Components of digital computer systems

Withdrawn

DIN 44300-6

Information processing - Concepts – Storage

Withdrawn

DIN 44300-7

Information processing - Concepts – Times

Withdrawn

DIN 44300-8

Information processing - Concepts - Processing functions

Withdrawn

DIN 44300-9

Information processing - Concepts - Process relations and modes of operation

Withdrawn

DIN 45322

Circular connectors for radio and associated sound equipment; six-pole connectors


DIN 45323

Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial power plugs)

Active

DIN 45500-1

High fidelity audio equipment and systems; minimum performance requirements; Part 1: general


DIN 45500-2

High fidelity audio equipment and systems; requirements for tuner equipments


DIN 45500-3

High fidelity audio equipment and systems; requirements for disk record reproducing equipments

Withdrawn

DIN 45500-4

High fidelity audio equipment and systems; minimum performance

Withdrawn

requirements for magnetic recording and reproducing equipment

DIN 45500-5

High fidelity audio equipment and systems; minimum performance requirements for microphones

Withdrawn

DIN 45500-6

High fidelity audio equipment and systems; minimum performance requirements for amplifiers


DIN 45500-7

High fidelity audio equipment and systems; requirements for loudspeakers


DIN 45500-8

High fidelity audio equipment and systems; for sets and systems

Withdrawn

DIN 45500-10

High fidelity audio equipment and systems; minimum performance requirements for headphones

Withdrawn

DIN 45507

Measuring apparatus for frequency variations in sound


recording equipment

DIN 45539

Disk record reproducing equipment; directives for measurements, markings and audio frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers


DIN 45596

Microphones; phantom powering

Withdrawn

DIN 46400-1

Steel flats with special magnetic properties cold rolled, non - oriented, finally annealed magnetic sheet and strip hysteresis loss at frequencies above 100 Hz


DIN 46400-3

Grain-oriented magnetic steel and strip technical conditions


DIN 47100

Cords for telecommunication; code of insulated conductors, colour of sheath

Withdrawn

DIN 47301-1

Terms of HF-lines Active

DIN 47301-2

Terms of HF-lines Active

DIN 47301-3

Definition of radio frequency transmission lines - mean characteristic impedance - mean standing wave ratio

Active

DIN 48803

Lightning protection system; Arrangement of components and dimensions for mounting

Withdrawn

DIN 48830

Lightning protection system; Description

Withdrawn




REPLACEMENT

DIN 51097 Testing of floor coverings; determination of the anti-slip properties: wet-loaded barefoot areas; walking method; ramp

Withdrawn DIN 51130






test

DIN 51130

Testing of floor coverings; determination of the anti-slip properties: workrooms and fields of activities with slip danger, walking method - ramp test

Withdrawn DIN 51097

DIN 51501

Lubricants; Lubricating Oils L-AN; Minimum Requirements

Withdrawn

DIN 52368

Testing of particleboards; determination of formaldehyde emission by gas analysis


DIN 53150

Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)

Active

DIN 53452Testing of Plastics; Flexural Test


DIN 53575

Flexible Cellular Polymeric Materials - Determination of Tear Strength


DIN 55003-3

Machine tools; symbols; numerically controlled machine tools

Withdrawn

DIN 58810

Surgical implants; threads for bone screws and nuts

Withdrawn

DIN 58888

Thread connection for microscope objectives





REPLACEMENT

DIN 66000 Information processing; switching algebra,

Active






mathematical signs and symbols

DIN 66001

Information processing; graphical symbols and their application

Active

DIN 66002

Information processing; handwriting of the digit 0 and of the upper case letter O

Active

DIN 66003Information technology - 7-bit code

Active

DIN 66004-1

Information processing - Coding on data media - Part 1: Representation of 7-bit code character sets on punched tape 25

Active

DIN 66004-2

Information processing - Coding on data media - Part 2: Representation of 7-bit coded and 8-bit coded character sets on punched cards

Active

DIN 66004-3

Information processing - Coding on data media - Part 3: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape 12

Active

DIN 66004-4

Information processing - Coding on data media - Part 4: Representation of 7-bit coded and 8-bit coded character sets on magnetic tape cassette 3,8

Active

DIN 66004-5

Information processing - Coding on data media - Part 5: Representation of 7-bit coded and 8-bit coded set on media-flexible disk cartridge

Active

DIN 66005

Information processing; representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12

Active

DIN 66006

Presentation of ALGOL/ALCOR programs on paper tape and punch cards

Withdrawn

DIN 66007

Font CMC 7 for magnetic ink character recognition; characters and nominal dimensions


DIN 66008-1

Font A for optical character recognition; characters and nominal dimensions

Active

DIN 66008-6

Font A for optical character recognition; characters and nominal dimensions; extension of the character set

Active

DIN 66008-7

Font A for optical character recognition; representation of characters by dots in a 9 × 9 matrix

Active

DIN 66009 Font B for optical character recognition;

Withdrawn

character

DIN 66020-1

Functional requirements for the interface between data terminal equipment and data circuit-terminating equipment - Part 1: General application

Active

DIN 66020-2

List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) in public data networks

Active

DIN 66020-4

Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)

Active

DIN 66020-9

Interface between data terminal

Active

equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per second

DIN 66021-1

Data transmission; interface between data circuit-terminating equipment (DCE) and data terminal equipment (DTE)

Active

DIN 66021-2

Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for synchronous transmission on group band circuits at 48000 bits per second

Active

DIN 66025-1

Numerical control of machines, format; general

Active

requirements

DIN 66025-2

Industrial automation; numerical control of machines; format, preparatory and miscellaneous functions

Active

DIN 66027

Information processing; programming language FORTRAN

Withdrawn

DIN 66215-1

Programming of numerically controlled machines; CLDATA, general structure and record types

Active

DIN 66215-2

Programming of numerically controlled machines; CLDATA; minor elements of type 2000 records (post-processor commands)

Active

DIN 66234

Information processing; programming language PL/I

Active

DIN 66255

Information processing; programming language PL/I

Active

DIN 66256

Information processing; programming language PASCAL

Withdrawn

DIN 66257

Numerical control of machines; concepts


DIN 66258-1

Interfaces and basic data link control procedures for data communication; C S-interface, V S-interface

Withdrawn

DIN 66258-2

Interface and basic data link control procedures for data communication; balanced interface for start-stop transmission using basic data link control procedures on point-to-point connection

Withdrawn

DIN 66261

Information processing; Nassi-Shneiderman flowchart symbols

Active

DIN 66264-1

Industrial automation systems and integration - Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel bus

Active

DIN 66264-2

Multiprocessor control system for industrial machines (MPST); industrial automatics; rules for information interchange

Active

DIN 66303Information technology - 8 bit code

Active

DIN V 66304

Industrial automation; Computer Aided Design; format for the exchange of standard parts data

Active

DIN 66325-2

Local and Metropolitan Area Networks; LLC; identical with ISO 8802-2:1989

Withdrawn ISO 8802-2

DIN 66325-4

Local and Metropolitan Area Networks; token-passing bus access method; identical with ISO/IEC 8802-4:1990

Withdrawn ISO/IEC 8802-4

DIN 69901

Project controlling; project management; concepts

Active




REPLACEMENT

DIN 71412Lubricating nipples; cone type

Active

DIN 72311-1

Lead storage batteries; starter batteries for motorcycles, nominal capacities, main

Active






dimensions

DIN 72311-4

Lead storage batteries; starter batteries, terminals, vent plugs and filler openings

Active

DIN 72311-8

Lead storage batteries; starter batteries for motor cycles and passenger cars

Active

DIN 72311-13

Lead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45 and 54 Ah, for lateral basic fastening 10,5

Active

DIN 72311-16

Lead storage batteries; starter batteries for starting, lighting and ignition, 12 V, 27, 36, 45, 54 and 63 Ah, for lateral basic fastening 19

Active

DIN 72311-17

Lead storage batteries;

Active

starter batteries, protective covering for terminal

DIN 72311-18

Lead storage batteries; starter batteries with basic fastening 10,5 for passenger cars and commercial vehicles; nominal capacities, main dimensions

Active

DIN 72311-20

Lead storage batteries; starter batteries for commercial vehicles; nominal capacities and main dimensions

Active

DIN 72311-21

Lead storage batteries; starter batteries with 10,5 basic fastening lugs for commercial vehicles; nominal capacities and main dimensions

Active

DIN 72552-1

Terminal markings for motor vehicles; scope, principles, requirements

Active

DIN 72552-2

Terminal markings for motor vehicles; codes

Active

DIN 72552-3

Terminal markings for motor vehicles; examples for application on circuit diagrams

Active

DIN 72552-4

Terminal markings for motor vehicles; summary

Active

DIN 75490

Radio communication devices in motor vehicles; installation space, general requirements

Active

list of din standard

Documents

optical character

grooved grooved

alternating

metropolitan

stripwound

lead storage

numerically

group band