list admission control parameters
TRANSCRIPT
![Page 1: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/1.jpg)
List Admission Control Parameters(LST UADMCTRL)
Function
Use this command to list the RNC-oriented Call Admission Control (CAC) algorithm parameters.
Note
None
Parameter
Parameter ID Parameter Name Parameter Description
AFSetObj AFSetObjMeaning: The activity factor at the radio layer varies with the service priority. The configuration of the activity
factor is performed based on the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive.
GUI Value Range: NOPRIORITY(NOPRIORITY), GOLD(GOLD), SILVER(SILVER), COPPER(COPPER)
Actual Value Range: NOPRIORITY, GOLD, SILVER, COPPER
Unit: None
Default Value: None
Recommended Value: None
Parameter Relationship: None
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
Example
List the RNC-oriented CAC algorithm parameters vertically. LST UADMCTRL:LstFormat=VERTICAL;
%%LST UADMCTRL: LstFormat=VERTICAL;%%RETCODE = 0 Execution succeeded.
List Admission Control Parameters--------------------------------- AFSetObj = NOPRIORITY UL AF of SRB = 10 DL AF of SRB = 10 UL AF of R99 AMR conv service = <NULL> DL AF of R99 AMR conv service = <NULL>UL AF of R99 non AMR conv service = <NULL>DL AF of R99 non AMR conv service = <NULL> UL AF of R99 Streaming service = <NULL> DL AF of R99 Streaming service = <NULL> UL AF of R99 interactive service = <NULL> DL AF of R99 interactive service = <NULL> UL AF of R99 background service = <NULL> DL AF of R99 background service = <NULL> AF of MBMS service = <NULL> AF of hsupa conv service = <NULL> AF of hsdpa conv service = <NULL> AF of hsupa streaming service = <NULL> AF of hsdpa streaming service = <NULL> AF of hsupa interactive service = <NULL>
![Page 2: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/2.jpg)
AF of hsdpa interactive service = <NULL> AF of hsupa background service = <NULL> AF of hsdpa background service = <NULL>
AFSetObj = GOLD UL AF of SRB = <NULL> DL AF of SRB = <NULL> UL AF of R99 AMR conv service = 50 DL AF of R99 AMR conv service = 50UL AF of R99 non AMR conv service = 100DL AF of R99 non AMR conv service = 100 UL AF of R99 Streaming service = 100 DL AF of R99 Streaming service = 100 UL AF of R99 interactive service = 10 DL AF of R99 interactive service = 10 UL AF of R99 background service = 10 DL AF of R99 background service = 10 AF of MBMS service = 100 AF of hsupa conv service = 100 AF of hsdpa conv service = 100 AF of hsupa streaming service = 100 AF of hsdpa streaming service = 100 AF of hsupa interactive service = 100 AF of hsdpa interactive service = 100 AF of hsupa background service = 100 AF of hsdpa background service = 100
AFSetObj = SILVER UL AF of SRB = <NULL> DL AF of SRB = <NULL> UL AF of R99 AMR conv service = 50 DL AF of R99 AMR conv service = 50UL AF of R99 non AMR conv service = 100DL AF of R99 non AMR conv service = 100 UL AF of R99 Streaming service = 100 DL AF of R99 Streaming service = 100 UL AF of R99 interactive service = 10 DL AF of R99 interactive service = 10 UL AF of R99 background service = 10 DL AF of R99 background service = 10 AF of MBMS service = 100 AF of hsupa conv service = 100 AF of hsdpa conv service = 100 AF of hsupa streaming service = 100 AF of hsdpa streaming service = 100 AF of hsupa interactive service = 100 AF of hsdpa interactive service = 100 AF of hsupa background service = 100 AF of hsdpa background service = 100
![Page 3: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/3.jpg)
AFSetObj = COPPER UL AF of SRB = <NULL> DL AF of SRB = <NULL> UL AF of R99 AMR conv service = 50 DL AF of R99 AMR conv service = 50UL AF of R99 non AMR conv service = 100DL AF of R99 non AMR conv service = 100 UL AF of R99 Streaming service = 100 DL AF of R99 Streaming service = 100 UL AF of R99 interactive service = 10 DL AF of R99 interactive service = 10 UL AF of R99 background service = 10 DL AF of R99 background service = 10 AF of MBMS service = 100 AF of hsupa conv service = 100 AF of hsdpa conv service = 100 AF of hsupa streaming service = 100 AF of hsdpa streaming service = 100 AF of hsupa interactive service = 100 AF of hsdpa interactive service = 100 AF of hsupa background service = 100 AF of hsdpa background service = 100(Number of results = 4)
1 reports in total
--- END
Output Description
Refer to parameter description of SET UADMCTRL.
![Page 4: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/4.jpg)
et Admission Control Parameters(SET UADMCTRL)
Function
Use this command to set the RNC-oriented Call Admission Control(CAC) algorithm parameters,including UL AF(activity factor) of traffic,DL AF of traffic and so on.
Note
None
Parameter
Parameter ID Parameter Name Parameter Description
AFSetObj AFSetObjMeaning: The activity factor at the radio layer varies with the service priority. The configuration of the activity factor is performed based on
the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive.
GUI Value Range: NOPRIORITY(NOPRIORITY), GOLD(GOLD), SILVER(SILVER), COPPER(COPPER)
Actual Value Range: NOPRIORITY, GOLD, SILVER, COPPER
Unit: None
Default Value: None
Recommended Value: None
Parameter Relationship: None
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlSrbActFactor UL AF ofSRB Meaning: UL activity factor of SRB.Signals might be discontinuously transmitted because of the activation detection of conversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time.
The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to NOPRIORITY.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
DlSrbActFactor DL AF ofSRB Meaning: DL activity factor of SRB. Signals might be discontinuously transmitted because of the activation detection of conversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation
time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to NOPRIORITY.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlAmrConvAF UL AF ofR99 AMR conv service Meaning: UL activity factor of the R99 AMR conversational service. Signals might be discontinuously transmitted because of the activation detection
of conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation
n time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 50
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
![Page 5: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/5.jpg)
Parameter ID Parameter Name Parameter Description
DlAmrConvAF DL AF ofR99 AMR conv service Meaning: DL activity factor of the R99 AMR conversational service. Signals might be discontinuously transmitted because of the activation detection
of conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel
occupation time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 50
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlNonAmrConvAF UL AF ofR99 non AMR convservice
Meaning: UL activity factor of the R99 non AMR conversational service. Signals might be discontinuously transmitted because of the activation
detection of conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to
channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
DlNonAmrConvAF DL AF ofR99 non AMR convservice
Meaning: DL activity factor of the R99 non AMR conversational service. Signals might be discontinuously transmitted because of the activation detection o
f conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time.
The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlStreamAF UL AF ofR99 Streamingservice Meaning: UL activity factor of the R99 streaming service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GGOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
DlStreamAF DL AF ofR99 Streamingservice Meaning: DL activity factor of the R99 streaming service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity
factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlInteractAF UL AF ofR99 interactiveservice Meaning: UL activity factor of the R99 interactive service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
![Page 6: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/6.jpg)
Parameter ID Parameter Name Parameter Description
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
DlInteractAF DL AF ofR99 interactiveservice Meaning: DL activity factor of the R99 interactive service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity
factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
UlBackgroundAF UL AF ofR99backgroundservice Meaning: UL activity factor of the R99 background service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
DlBackgroundAF DL AF ofR99backgroundservice Meaning: DL activity factor of the R99 background service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 10
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
MbmsAF AF ofMBMSservice Meaning: Activity factor of the MBMS service. Signals might be discontinuously transmitted because of the activation detection of conversationalservice
and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsupaConvAF AF of hsupaconv service Meaning: UL activity factor of the HSUPA conversational service. Signals might be discontinuously transmitted because of the activation detectionof conversational servicethe ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
![Page 7: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/7.jpg)
Parameter ID Parameter Name Parameter Description
Recommended Value: 50
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsdpaConvAF AF of hsdpa conv service Meaning: DL activity factor of the HSUPA conversational service. Signals might be discontinuously transmitted because of the activation detectionof
conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation
time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 50
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsupaStreamAF AF of hsupastreamingservice Meaning: UL activity factor of the HSUPA streaming service. Signals might be discontinuously transmitted because of the activation detection
ofconversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation
time. The activity factors of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsdpaStreamAF AF of hsdpa streamingservice Meaning: DL activity factor of the HSUPA streaming service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsupaInteractAF AF of hsupainteractiveservice Meaning: UL activity factor of the HSUPA interactive service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsdpaInteractAF AF of hsdpa interactiveservice Meaning: DL activity factor of the HSUPA interactive service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
![Page 8: List Admission Control Parameters](https://reader036.vdocuments.us/reader036/viewer/2022081805/55cf9677550346d0338baa86/html5/thumbnails/8.jpg)
Parameter ID Parameter Name Parameter Description
HsupaBackGroundAF AF of hsupabackgroundservice Meaning: UL activity factor of the HSUPA background service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD,SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
HsdpaBackGroundAF AF of hsdpabackgroundservice Meaning: DL activity factor of the HSUPA background service. Signals might be discontinuously transmitted because of the activation detection ofconversational
service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors
of the same transport channel might be different in UL and DL.
GUI Value Range: 0~100
Actual Value Range: 0~1, step: 0.01
Unit: None
Default Value: None
Recommended Value: 100
Parameter Relationship: This parameter is valid only when AFSetObj is set to GOLD, SILVER, or COPPER.
Service Interrupted After Modification : No (No impact on the UE in idle mode)
Impact on Network Performance: None
Example
The CAC algorithm parameters for gold priority are set as follows: 1.The UL activity factor of R99 AMR service is 0.5; 2.The DL activity factor of R99 AMR service is 0.5; 3.The UL activity factor of R99 AMR service is 1; 4.The DL activity factor of R99 AMR service is 1; ......SET UADMCTRL: AFSetObj=GOLD, UlAmrConvAF=50, DlAmrConvAF=50, UlNonAmrConvAF=100, DlNonAmrConvAF=100, UlStreamAF=100, DlStreamAF=100, UlInteractAF=10, DlInteractAF=10, UlBackgroundAF=10, DlBackgroundAF=10, MbmsAF=100, HsupaConvAF=100, HsdpaConvAF=100, HsupaStreamAF=100, HsdpaStreamAF=100, HsupaInteractAF=10, HsdpaInteractAF=10, HsupaBackGroundAF=10, HsdpaBackGroundAF=10;