liquid level switches · is ideal for industrial environments. float level switches (not shown) are...

873Davis Inotek Instruments www.davis.com

Level

J

Liquid Level Switches

Compact Level SwitchHigh or Low Liquid Level

Stainless Steel Level Switch

• Ideal for use in viscous or contaminated liquids.• Liquid Specific Gravity: .90 min.• No metal parts to corrode• Mounts vertically to top or bottom of tanks• 1-year warranty

Cat. No. Model Material Description PriceGM424112 133299 Teflon® Liquid Level Switch $322.00

LS-1700 SeriesExtremely compact, small float displace-

ment, 20VA switch. Whenever possible, singlestation units with greater float displacementand switch ratings should be used. For use inoils, water. Supplied with 24", #22AWG leadwires.

SPECIFICATIONSOther Wetted Material 316 SS, HysolOperating Temperature Brass/Buna-Water: 0° to 180°F; Brass/Buna-Oil: 0° to 230°F;

Stainless/Teflon®: -40° to 225°FPressure Rating 150 psi max. (Stainless/Teflon® 1000 psi)Mounting 1⁄8" NPTDimensions 7⁄8" H x 1" Dia.Switches are UL recognized, CSA Approved

Stem FloatCat. No. Model Material Material Switch PriceGM424106 01701 Brass Buna N 20 VA $31.00GM424107 01702 316 SS Buna N 20 VA 52.00GM424108 26790 Brass Teflon® 20 VA, N.O. 65.00GM424109 27978 Brass Teflon® 20 VA, N.C. 65.00GM424110 26791 316 SS Teflon® 20 VA, N.O. 73.00GM424111 27980 316 SS Teflon® 20 VA, N.C. 73.00

LS-1950 Series These all-stainless-steel units

are exceptionally accurate andrugged for level monitoring athigher temperatures...to 300°F(LS-1950)... and in pressurized orcorrosive liquids. Widely used inchemical plants and systems. Foruse in oils, water, chemicals.

Catalog No. Model Description PriceGM424113 01950 316 SS Level Switch, 20 VA $63.00GM424114 26717 316 SS Level Switch, 100 VA 70.00

SPECIFICATIONSTemperature Range 0° to 300°FPressure (max.) 40 psigSwitch SPDT, 20 VA, N.O. or N.C.Cable No. 18 AWG, 24"Connection 1⁄4" NPTDimensions 2" Height x 21⁄8" Diameter

SPECIFICATIONSOperating Temp. -40° to 300°FPressure Rating 750 psi max.Mounting 1⁄4" NPTSwitch SPST, 20/100 VALead Wires #18 AWG, 24" LMaterial 316 Stainless SteelSwitches are UL recognized, CSA Approved

All Teflon® switches operate dependably in sticky orcontaminated liquids. The problem of material build-up, which inhibits float travel, is minimized or elimi-nated. Compatible with a broad range of chemicals.Ideal for chemical metering pumps or processing and inplating systems.

FLOW

LINE

SERI

ES

Davis Inotek Instruments www.davis.com874

Switches

#1 Tuning Fork Level SwitchesIdeal for more challenging, light-to-medium coat-ing or scaling type liquids including wastewater,light brine, slurry, and caustic solutions. Alsouse with non-hazardous, light-weight solids likegrains or pellets. Includes 8-ft cable.

Ultrasonic Level Switches (shown)Work best with relatively clean, light coating orscaling liquids including treated water, printingink, spent acid, solvents, and light-weight oils.Available in PP or Teflon® PFA for increasedchemical compatibility. Two sensor length op-tions increase installation flexibility. Includes 8-ft cable.

#2 Non-Intrusive RF CapacitanceLevel Switch

If you are concerned about your liquid’s purity,this non-intrusive level switch is the solution.Sensor mounts on the outside of your non metal-lic tank—never touches your liquid. Use withclean, non-coating, non-scaling, and conductiveliquids. NEMA 4X, polysulfone sensor enclosureis ideal for industrial environments.

Float Level Switches (not shown)Are best for clean, non-coating, non-scaling liq-uids. Choose either vertical or horizontal mount-ing to fit your application. Your liquid must havea specific gravity of 0.8 or greater. Includes 2-ftcable.

#3 Buoyancy Level SwitchesAre best for clean, non-coating or non-scalingtype liquids including process water, acid, andchemical solutions. Baffled body design reducesswitch chatter caused by agitation. Choose fromPP or PVDF wetted materials for compatibilitywith your liquid. Your liquid must have a specificgravity of 0.8 or greater. Includes 8-ft cable.

#4 SuperGuard™ RF CapacitanceLevel SwitchIs the perfect switch for conductive, light-to-medium coating, or scaling liquids like soap solu-tions, printing ink, and wastewater.Polypropylene construction is ideal for corrosiveenvironments. Includes 8-ft cable.

Flowline® Point Level Switches and ControllersChoose from six switch technologies to fit your application

#1 Ultrasonic Level Switch

Build a Complete System...1 Choose a switch suitable for your liquid2 Select a controller

#2 Non-InvasiveRF Capacitance Level Switches

#4 RF Capacitance Level Switches

#3 Buoyancy Level Switches

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

FLOW

LINE SERIES


Catalog No. Model Sensor Mounting Mounting Accuracy* Repeatability* Temperature Pressure† Output PriceMaterial Threads Orientation (max)

Float level switches

FN20120 LV20-1201 PP 1/8" NPT (M) Vertical ± 5 mm ± 2 mm -40 to 194°F 25 psi Reed: $21.00(-40 to 90°C) 50 VA at 120

VAC/VDCFN20121 LV20-5201 PVDF 1/8" NPT (M) Vertical 42.00

FN20122 LH21-1201 PP 1/2" NPT (M) Horizontal 21.00

Buoyancy level switchesFN70130 LV10-1301 PP 3/4" NPT (M) Vertical ± 2 mm ± 1 mm -40 to 194°F 25 psi Reed: 85.00

(-40 to 90°C) 15 VA at 120 VAC/VDC

FN70230 LV10-5301 PVDF 3/4" NPT(M) 185.00SuperGuard™ RF capacitance level switchFN20125 LP15-1405 PP 3/4" NPT(M) — ± 1 mm ± 0.5 mm -40 to 194°F 150 psi SPST relay: 250.00

(-40 to 90°C) 1A at 60VDC/VAC

Tuning fork level switchFN20126 LZ10-1405 PP/Ryton® 3/4" NPT (M) Vertical ± 1 mm ± 0.5 mm -40 to 194°F 150 psi SPST relay: 290.00

(-40 to 90°C) 1 A at 60 VDC/VAC

Ultrasonic level switchesFN20127 LU10-1305 PP 3/4" NPT (M) — ± 1 mm ± 0.5 mm -40 to 194°F 150 psi SPST relay: 270.00

(-40 to 90°C) 1A at 60 280.00VDC/VAC

FN20128 LU10-1405FN20129 LU10-2305 PFA 3/4" NPT (M) — 270.00FN20130 LU10-2405 380.00Non-intrusive RF capacitance level switchFN506002R LP50-6005 PS — — — ± 1 mm -40 to 194°F — SPST relay: 215.00

(-40 to 90°C) 1A at 60 VDC/VAC

FN956001 LP95-6001 Mounting bracket, polyethylene 20.00FN951001 LP95-1001 Mounting bracket, polypropylene 20.00Includes 8-ft cable. Weld mounting bracket (sold below) in place for firm hold.FN401001 LC40-1001 Single Sensor Controller for alarms 170.00FN411001 LC41-1001 Dual Sensor Controller for automatic control 200.00FN421001 LC42-1001 Three Sensor Controller for automatic control with alarms 250.00

Please inquire for NIST Certification

Selectable normally open or normally closed relays increase system flexibility

NIST it

Digital Indicator FeaturesLC40 remote Relay Controller LC10 Compact Relay ControllerOne or two relay outputs One relay outputFail-safe design for direct actuation of pumps, valves or alarms Mounts directly to sensor or installation fittingsPP enclosure mounts on 35 mm DIN rail or panel installation PP enclosure NEMA 4X with 1/2" conduit connector

LED indicators for sensor, relay and power statusAdjustable 0-60 second time delay dampers cut relay chatter

Invert switch provides simple N.O. or N.C. relay operation120 VAC (240 VAC) , 50/60 Hz

Optional flash alarm brings immediate attention to alarm conditions

FLOW

LINE

SERI

ES


Flowline® Switch Pro™ Point Level Control Switches

Select from three sensor technologies

Tuning Fork SensorsAre best for more challenging, light to mediumcoating or scaling type liquids including waste-water, light brine, slurry, and caustic solutions.

Ultrasonic SensorsAre best for relatively clean, light coating or scal-ing type liquids including treated water, printingink, spent acid, solvent and light-weight oils.Available in PP, or Teflon™ PFA for increasedchemical compatibility.

Buoyancy Sensors Are best for clean, non-coating or scaling typeliquids including process water, acid, and chemical solutions.

• Process vessels• Bulk storage tanks• Waste storage tanks

Multiple process interface/sensor configurations available to fit your application

These versatile Switch Pro™ switches allowyou to interface with a control device like a PLC,or connect directly to a pump or other equipment.Choose from three sensor technologies dependingon your liquid. mount switches through the side ofyour tank—mount high to prevent spills, or low toprotect your pump from running dry.

Switch Pro™ with compact junction box is idealfor interfacing with remote devices such as a PLC,SCADA, or alarm. For hazardous areas, select theultrasonic sensor with the intrinsically safe out-put that switches between 4 or 20 mA.

Switch Pro™ with relay controller providesbuilt-in SPDT relay for controlling pumps, valves,or alarms. LEDs give a visual indication of powerand relay status. A relay time delay (0 to 60 sec)eliminates relay chatter.

Model AU13

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

FLOW

LINE SERIES


NIST it

Catalog No. Model Sensor Technology Sensor Material Output Configuration PriceSwitch Pro™ with compact junction boxFN13113 AZ13-1130 Tuning fork PP/Ryton® p-channel, FET $330.00FN13114 AZ14-1130 n-channel, FET 330.00FN13115 AZ18-1130 Relay, 1A 350.00FN13116 AU10-1130 Ultrasonic PP 4 or 20 mA* 350.00FN13117 AU13-1130 p-channel, FET 310.00FN13118 AU14-1130 n-channel, FET 310.00FN13119 AU-18-1130 Relay, 1A 330.00FN13120 AU10-2130 Ultrasonic Teflon® PFA 4 or 20 mA 450.00FN13121 AU13-2130 p-channel, FET 410.00FN13122 AU14-2130 n-channel, FET 410.00FN13123 AU18-2130 Relay, 1A 430.00FN13124 AH16-1130 Buoyancy PP Reed, 15 VA 145.00Switch Pro™ with relay controllerFN13125 AZ13-1120 Tuning fork PP Relay, SPDT 250 VAC, 10 A 420.00FN13126 AU13-1120 Ultrasonic PP 400.00FN13127 AU13-2120 Ultrasonic Teflon® PFA 500.00FN13128 AH13-1120 Buoyancy PP 235.00* Models are intrinsically safe. CSA approval: Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; Class II. CSA entity parameters: Vmax = 32 VDC, =0.5 A, Ci = 0, Li = 0


SPECIFICATIONSSwitch Pro™ interfacePower Switch Pro™ with compact junction box:12 to 36 VDC

Switch Pro™ with relay controller:120/240 VACRelay delay 0 to 60 seconds (with relay controller)Temperature Range -40° to 194°F (-40° to 90°C)Mounting threads 3/4" NPT(M)Housing NEMA 4X, IP65SensorsTuning ForkAccuracy ± 1 mm in waterRepeatability ± 0.5 mm in waterPressure rating 150 psi at 25°CUltrasonicAccuracy ± 1 mm in waterRepeatability ± 0.5 mm in waterPressure rating 150 psi at 25°CBuoyancyAccuracy ± 2 mm in waterRepeatability ± 1 mm in waterSpecific gravity 0.8 minimumPressure rating 25 psi at 25°C

Tech TipThe fail-safe relay controller features a 10 amp

relay with an adjustable time delay, LED indicatorsand invert switch for simple NO or NC operation.The rugged NEMA 4X enclosure is made of fire re-tardant polypropylene with a 300° rotational base.

This switch package is installed through the side of a tank

FLOW

LINE

SERI

ES


Flowline® Switch Pak™ Single-Point Level SystemsPerfect for high-level spill prevention or low-level pump protection

• Three sensor technologies to match your application needs—float,ultrasonic, and tuning fork

• Choose PP or PVDF for chemical compatibility with most liquids• High or low relay switch with one switch point controls pump, valve, or

alarm directly• Eliminate relay chatter with 0 to 60 second time delay• Models with alarm include a strobe light to indicate an activated relay


Float SensorsAre best for clean, non-coating or scaling typeliquids including process water, acid and chemical solutions.

Ultrasonic SensorsAre ideal for relatively clean, light coating orscaling type liquids including treated water,printing ink, spent acid, solvent and light-weightoils.

Tuning Fork SensorsAre perfect for more challenging, light to medi-um coating or scaling type liquids includingwastewater, light brine, slurry, and caustic solutions.

Float Switch with Alarm

Float Switch

SPECIFICATIONSRange 1 to 8 ftAccuracyFloat ± 0.1"Ultrasonic tuning fork ± 0.04"RepeatabilityFloat ± 0.3"Ultrasonic, tuning fork ± 0.02"Temperature rating -40 to 194°F (-40 to 90°C)Pressure rating 0 to 150 psiMounting threads 2” NPT(M)Relay output 10 A, 250 VAC, NO or NCPower 120/240 VAC, 50/60 Hz

• Bulk storage tanks• Waste storage tanks• Waste treatment tanks

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

FLOW

LINE SERIES


NIST it

Sensor length Level switches Level switches with alarm

Catalog No. Model Price Catalog No. Model PriceFloat sensors, PP1 ft FN13423 AV13-4223-12 $315.00 FN13463 AV13-4213-12 $370.002 ft FN13424 AV13-4223-24 320.00 FN13464 AV13-4213-24 405.003 ft FN13425 AV13-4223-36 325.00 FN13465 AV13-4213-36 380.004 ft FN13426 AV13-4223-48 330.00 FN13466 AV13-4213-48 385.005 ft FN13427 AV13-4223-60 335.00 FN13467 AV13-4213-60 390.006 ft FN13428 AV13-4223-72 340.00 FN13468 AV13-4213-72 395.007 ft FN13429 AV13-4223-84 345.00 FN13469 AV13-4213-84 400.008 ft FN13430 AV13-4223-96 350.00 FN13470 AV13-4213-96 405.00Float sensors, PVDF1 ft FN13431 AV13-5223-12 465.00 FN13471 AV13-5213-12 520.002 ft FN13432 AV13-5223-24 490.00 FN13472 AV13-5213-24 545.003 ft FN13433 AV13-5223-36 515.00 FN13473 AV13-5213-36 570.004 ft FN13434 AV13-5223-48 540.00 FN13474 AV13-5213-48 595.005 ft FN13435 AV13-5223-60 565.00 FN13475 AV13-5213-60 620.006 ft FN13436 AV13-5223-72 590.00 FN13476 AV13-5213-72 645.007 ft FN13437 AV13-5223-84 615.00 FN13477 AV13-5213-84 670.008 ft FN13438 AV13-5223-96 640.00 FN13478 AV13-5213-96 695.00Ultrasonic sensors, PP1 ft FN13439 AU13-4223-12 480.00 FN13479 AU13-4213-12 535.002 ft FN13440 AU13-4223-24 485.00 FN13480 AU13-4213-24 540.003 ft FN13441 AU13-4223-36 490.00 FN13481-AU13481 AU13-4213-36 545.004 ft FN13442 AU13-4223-48 495.00 FN13482 AU13-4213-48 550.005 ft FN13443 AU13-4223-60 500.00 FN13483 AU13-4213-60 555.006 ft FN13444 AU13-4223-72 505.00 FN13484 AU13-4213-72 560.007 ft FN13445 AU13-4223-84 510.00 FN13485 AU13-4213-84 565.008 ft FN13446 AU13-4223-96 515.00 FN13486 AU13-4213-96 570.00Ultrasonic sensors, PVDF1 ft FN13447 AU13-5223-12 630.00 FN13487 AU13-5213-12 685.002 ft FN13448 AU13-5223-24 655.00 FN13488 AU13-5213-24 710.003 ft FN13449 AU13-5223-36 680.00 FN13489 AU13-5213-36 735.004 ft FN13450 AU13-5223-48 705.00 FN13490 AU13-5213-48 760.005 ft FN13451 AU13-5223-60 730.00 FN13491 AU13-5213-60 785.006 ft FN13452 AU13-5223-72 755.00 FN13492 AU13-5213-72 810.007 ft FN13453 AU13-5223-84 780.00 FN13493 AU13-5213-84 835.008 ft FN13454 AU13-5223-96 805.00 FN13494 AU13-5213-96 860.00Tuning fork sensors, PP1 ft FN13455 AZ13-4223-12 500.00 FN13495 AZ13-4213-12 555.002 ft FN13456 AZ13-4223-24 505.00 FN13496 AZ13-4213-24 560.003 ft FN13457 AZ13-4223-36 510.00 FN13497 AZ13-4213-36 565.004 ft FN13458 AZ13-4223-48 515.00 FN13498 AZ13-4213-48 570.005 ft FN13459 AZ13-4223-60 520.00 FN13499 AZ13-4213-60 575.006 ft FN13460 AZ13-4223-72 525.00 FN134100 AZ13-4213-72 580.007 ft FN13461 AZ13-4223-84 530.00 FN134101 AZ13-4213-84 550.008 ft FN13462 AZ13-4223-96 535.00 FN134102 AZ13-4213-96 590.00FN501001 LM50-1001 Side Mounting Bracket 30.00


FLOW

LINE

SERI

ES


Flowline® Smart Trak™ Systems for Point Level Control

SPECIFICATIONSRange 8" to 8 ftAccuracyFloat ± 0.1"Ultrasonic, tuning fork 0.04"RepeatabilityFloat ± 0.3"Ultrasonic, tuning fork ± 0.02"Temperature range -40 to 194°F (-40 to 90°C)Pressure rating atmosphericMounting threads 2" NPT(M)Output(s)Dual-point switch: one SPDT relay, 10 A, 250 VAC, NO or NCTriple-point switchesFloat three reed switches, 15 VA, 120 VAC/VDCUltrasonic, tuning fork three relays, 1A, 60 VAC or 60 VDCWetted materialsFloat, ultrasonic PolypropyleneTuning fork Polypropylene, Ryton®

PowerDual-point switches 120/240 VAC, 50/60 HzTriple-point switches 12 to 36 VDCRail length Dual-point switches Triple-point remote switches

Perform automatic fill or empty operations between two switch points


Float SensorsAre best for clean, non-coating or scaling typeliquids including process water, acid, and chemical solutions.

Ultrasonic SensorsAre ideal for relatively clean, light coating orscaling type liquids including treated water,printing ink, spent acid, solvent and light-weightoils.

Tuning Fork SensorsAre perfect for more challenging, light to medium coating or scaling type liquids includingwastewater, light brine, slurry and caustic solutions.

Dual-Point SwitchesInclude two sensors and an integral NO/NC re-lay to control a pump or valve. The 0 to 60 secondtime delay eliminates relay chatter. LED lightsindicate sensor, power, and relay status.

Triple-Point Remote SwitchesInclude three sensors for critical applications.Two sensors are used as switch points for fill orempty operation, and the third sensor detectshigh or low alarm conditions. Interface relay out-put with a remote control device such as thetriple-point controller—order below

Offers a complete solution for high andlow level switching.

Choose rail length for your tank and slide sen-sors to desired positions

Polypropylene construction—ideal for corrosive environments

FLOW

LINE SERIES


Dual Point Triple PointCatalog No. Model Price Catalog No. Model Price

Float sensor1 ft FN43324 AV23-4313-12-12-12 490.00 FN433418 Av36-4342-12-12-12-12 465.002 ft FN43325 AV23-4313-24-24-24 505.00 FN433419 AV36-4342-24-24-24-24 480.003 ft FN43326 AV23-4313-36-36-36 520.00 FN433420 AV36-4342-36-36-36-36 495.004 ft FN43327 AV23-4313-48-48-48 550.00 FN433421 AV36-4342-48-48-48-48 510.005 ft FN43328 AV23-4313-60-60-60 550.00 FN433422 Av36-4342-60-60-60-60 525.006 ft FN43329 AV23-4313-72-72-72 565.00 FN433423 AV36-4342-72-72-72-72 540.007 ft FN43330 AV23-4313-84-84-84 580.00 FN433424 AV36-4342-84-84-84-84 555.008 ft FN43331 AV23-4313-96-96-96 595.00 FN433425 AV36-4342-96-96-96-96 570.00Ultrasonic sensor1 ft FN43332 AU23-4313-12-12-12 820.00 FN433426 AU38-4342-12-12-12-12 1,020.002 ft FN43333 AU23-4313-24-24-24 835.00 FN433427 AU38-4342-24-24-24-24 1,035.003 ft FN43334 AU23-4313-36-36-36 850.00 FN433428 AU38-4342-36-36-36-36 1,050.004 ft FN43335 AU23-4313-48-48-48 865.00 FN433429 AU38-4342-48-48-48-48 1,065.005 ft FN43336 AU23-4313-60-60-60 880.00 FN433430 AU38-4342-60-60-60-60 1,080.006 ft FN43337 AU23-4313-72-72-72 895.00 FN433431 AU38-4342-72-72-72-72 1,095.007 ft FN43338 AU23-4313-84-84-84 910.00 FN433432 AU38-4342-84-84-84-84 1,110.008 ft FN43339 AU23-4313-96-96-96 925.00 FN433433 AU38-4342-96-96-96-96 1,125.00Tuning fork sensor1 ft FN433410 AZ23-4313-12-12-12 860.00 FN433434 AZ38-4342-12-12-12-12 1,080.002 ft FN433411 AZ23-4313-24-24-24 875.00 FN433435 AZ38-4342-24-24-24-24 1,095.003 ft FN433412 AZ23-4313-36-36-36 890.00 FN433436 AZ38-4342-36-36-36-36 1,110.004 ft FN433413 AZ23-4313-48-48-48 905.00 FN433437 AZ38-4342-48-48-48-48 1,125.005 ft FN433414 AZ23-4313-60-60-60 920.00 FN433438 AZ38-4342-60-60-60-60 1,140.006 ft FN433415 AZ23-4313-72-72-72 935.00 FN433439 AZ38-4342-72-72-72-72 1,155.007 ft FN433416 AZ23-4313-84-84-84 950.00 FN433440 AZ38-4342-84-84-84-84 1,170.008 ft FN433417 AZ23-4313-96-96-96 965.00 FN433441 AZ38-4342-96-96-96-96 1,185.00FN501001 LM50-1001 Side Mounting Bracket 30.00FN401001 LC40-1001 Single Sensor Controller for alarms 170.00FN411001 LC41-1001 Dual Sensor Controller for automatic control 200.00FN421001 LC42-1001 Three Sensor Controller for automatic control with alarms 250.00


NIST it

Digital Indicator FeaturesLC40 remote Relay Controller LC10 Compact Relay ControllerOne or two relay outputs One relay outputFail-safe design for direct actuation of pumps, valves or alarms Mounts directly to sensor or installation fittingsPP enclosure mounts on 35 mm DIN rail or panel installation PP enclosure NEMA 4X with 1/2" conduit connector

LED indicators for sensor, relay and power statusAdjustable 0-60 second time delay dampers cut relay chatter

Invert switch provides simple N.O. or N.C. relay operation120 VAC (240 VAC) , 50/60 Hz

Optional flash alarm brings immediate attention to alarm conditions

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

Bulk Tank Level Controller Features

FLOW

LINE

SERI

ES


To fit your small or bulk tank applications with ultrapure, dirty, coating,scaling or corrosive liquids

Flowline® Ultrasonic Level Controllers

• Accurate and reliable level detection up to 12 feet• Dual relay channels for pump, valve and alarm automation• 8° beam allows application in restricted environments• Rugged NEMA 4X enclosure with PVDF transducer• Automatic temperature compensation over entire range• Simple potentiometer calibration for all relay set points• LED indication for power, relay and acoustic fail-safety• Echo-Map™ filtration eliminates false echo signal returns• Fail-safe intelligence provides maximum process safety

BULK TANK LEVEL CONTROLLER SPECIFICATIONSRange 0.5 to 12’ (15.2 cm to 3.7 m)Accuracy ± 0.25% of span (air)Resolution 0.125" (3 mm)Frequency 50 kHzPulse Rate 3 per secondBeam Width 8° conicalBlocking Distance 6" (15.2 cm) minimumSupply Voltage 5001: 120 VAC

5801: 18-30 VDCRelay Types (2) Latched, SPDTRelay Rating 5001: 250 VAC, 10A, 1/2 hp.

5801: 250 VAC, 10A, 1/4 hp.Relay Mode Selectable NO or NCRelay Latch ON or OFFHysterysis Adjustable over rangeTemperature Range F: -40° to 140°

C: -40° to 60°Pressure Rating 30 psi (2 bar) @ 25 °C., derated @ 1.667 psi (.113 bar) per °C. above 25°CConduit Connection 1/2" NPTCE Compliance (pending) EN 50082-2 immunity

EN 55011 emissionEN 61010-1 safety

The bulk tank ultrasonic level controller ismounted through the top wall of the tank and pro-vides non-contact level detection up to 12’ withtwo integral relays for pump, valve or alarm con-trol. This device is ideal for automating intermedi-ate bulk tanks, day tanks and waste lift stations.

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

FLOW

LINE SERIES


The small tank ultrasonic level controller ismounted through the top wall of the tank and pro-vides non-contact level detection up to 6’ with twointegral relays for pump, valve or alarm control.This device is ideal for automating small tanks,process vessels, waste lift stations or IBC’s.

Catalog No. Model Description PriceFN165001 LA165001 RicoRelay Small Tank Ultrasonic Level Controller (3/4" NPT) $550.00FN165061 LA165061 RicoRelay Small Tank Ultrasonic Level Controller (3/4" G) metric thread with Viton® mounting gasket 555.00FN215001 LA215001 RicoRelay Bulk Tank Ultrasonic Level Controller (2" NPT) 650.00FN215061 LA215061 RicoRelay Bulk Tank Ultrasonic Level Controller (2" G) metric thread with Viton® mounting gasket 655.00


Small Tank Level Controller Features • Accurate and reliable level detection up to 6 feet• Dual relay channels for pump, valve and alarm automation• 8° beam allows application in restricted environments• Rugged NEMA 4X enclosure with PVDF transducer• Automatic temperature compensation over entire range• Simple potentiometer calibration for all relay set points• LED indication for power, relay and acoustic fail-safety• Echo-Map™ filtration eliminates false echo signal returns• Fail-safe intelligence provides maximum process safety

SMALL TANK LEVEL CONTROLLER SPECIFICATIONSRange 3.6" to 6' (9 cm to 1.8 m)Accuracy ± 0.25% of span (air)Resolution 0.125" (3 mm)Frequency 83 kHzPulse Rate 3 per secondBeam Width 8° conicalBlocking Distance 3.6" (9 cm) minimumSupply Voltage 5001: 120 VAC

5801: 18-30 VDCRelay Types (2) Latched, SPDTRelay Rating 5001: 250 VAC, 10A, 1/2 hp.

5801: 250 VAC, 10A, 1/4 hp.Relay Mode Selectable NO or NCRelay Latch ON or OFFHysterysis Adjustable over rangeTemperature Range F: -40° to 140°

C: -40° to 60°Pressure Rating 30 psi (2 bar) @ 25 °C., derated @ 1.667 psi (.113 bar) per °C above 25 °CConduit Connection 1/2" NPTCE compliance (pending) EN 50082-2 immunity


NIST it

Viton is a registered trademark of DuPont Dow Elastomers

FLOW

LINE

SERI

ES


Flowline® Ricochet™ Alphasonic Non-Contact Level Transmitter• Non-contact continuous level measurement with two-wire 4-20 mA

output• Accurate and reliable measurement from 0.3 to 6 feet• Low cost solution for broad range of OEM and process applications• 3/4” transducer for installation in small tank environments• Automatic temperature compensation over entire range• Echo-safe™ filtration eliminates false echo signal returns• All plastic construction with PVDF transducer and PP enclosure rated

NEMA 4X• Fail-safe intelligence ensures echo signal loss safety

SPECIFICATIONSRange 0.3 to 6 feetAccuracy ± 0.25% of span in airResolution 0.125” (3 mm)Frequency 40 kHzPulse rate 5 per secondBeam width 12° conicalBlocking distance 2" minimumLED indication Power statusSupply voltage Two-wire, 12-36 VDCMax loop resistance 600 ohms @ 36 VDCSignal output 4-20 mA, 18-36 VDCSignal invert 4-20/20-4 mAFail-safe diagnostics Reverts to 4 mA or 22 mATemperature range F: -40° to 140° C: -40° to 70°Temp. comp Automatic over entire rangePressure rating 30 psi (2 bar) @ 25°C., derated @ 1.667

(.113 bar) psi per °C above 25°CEnclosure rating NEMA 4X/IP65Enclosure material PolypropyleneTransducer material PVDFMounting threads 3/4" NPT

Range RadiusFeet Inches

1 1.22 2.13 2.94 3.75 4.96 5.4

Clearance Radius

LA15

Digital Indicator Features• Easy single button scaling • Steady, accurate display to

± 199,990• 41⁄2 Digits + extra zero• UL Listed

• 4 Alarm points with LED statusindication

• NEMA 4 front panel• Isolated 24V transmitter power

supply

TO ORDER, SEE NEXT PAGE

FLOW

LINE SERIES


NIST itFlowline® Ricochet™ Bulk Tank Alphasonic Level Transmitter

• Accurate and reliable level measurement up to 12 feet• Low cost solution for OEM and process applications• Simple design does not require any field calibration• 8° beam allows application in restricted environments• Rugged NEMA 4X enclosure with PVDF transducer• Automatic temperature compensation over entire range• LED indication for power and fail-safety status• Echo-safe™ filtration eliminates false echo signal returns• Fail-safe intelligence provides maximum process safety

SPECIFICATIONSRange 0.5 to 12' (15.2 cm to 3.7 m)Accuracy ± 0.25% of span (air)Resolution 0.125” (3 mm)Frequency 50 kHzPulse rate 3 per secondBeam width 8° conicalBlocking distance 6" (15.2 cm) minimumSupply voltage 12 - 36 VDCLoop resistance 600 ohms @ 36 VDCSignal output 4-20 mA, 12-36 VDCFail-safe diag. Reverts to 22 mALED indication Power and fail-safetyTemperature range F: -40° to 140°

C: -40° to 60°Temperature comp Automatic over entire rangePressure rating 30 psi (2 bar) @ 25°C, derated @ 1.667

psi (.113 bar) per °C, above 25°CEnclosure rating NEMA 4X (IP65)Enclosure material Polypropylene, U.L. 94VOTransducer material PVDFMounting threads 2" NPT (2" G)Mounting gasket Viton (metric only)Conduit connection 1/2" NPTCE compliance EN 50082-2 immunity

EN 55011 emission

Catalog No. Model Description PriceFN155001 LA15-5001 Ricochet Alphasonic Non-Contact Level Transmitter, 3/4" NPT $495.00FN205001 LA20-5001 Richochet Bulk Tank Alphasonic Level Transmitter, 2" NPT 595.00FN205061 LA20-5061 Richochet Bulk Tank Alphasonic Level Transmitter, 2" G metric thread with 2" Viton® mounting gasket 600.00PD885100 PD690-3-N Digital Indicator 117VAC 229.00PD885101 PD690-3-14 Digital Indicator 117VAC w/2 relay outputs 289.00PD885102 PD690-3-15 Digital Indicator 117VAC w/isolated 4-20mA output 328.00PD885103 PD690-3-16 Digital Indicatorr 117VAC w/2 relay & 4-20mA output 408.00PD885104 PD690-3-17 Digital Indicator 117VAC w/4 relay outputs 424.00PD885105 PD690-3-18 Digital Indicator 117VAC w/4 relay output & 4-20mA 478.00


Range RadiusFeet Inches

1 1.22 2.13 2.94 3.75 4.96 5.47 6.28 7.19 7.910 8.811 9.612 10.4

Beam Radius

Viton is a registered trademark of DuPont Dow Elastomers

FLOW

LINE

SERI

ES


Flowline® 2-Wire Ultrasonic Level Transmitter

APPLICATION VARIABLESLiquid Yes NoFoam •Conductive •Non-conductive •∆ Conductivity •Contact •Non-contact •Clean •Dirty •Coating •Non-coating •Vapors •∆ Gas density •Vacuum •Ambient pressure •Low pressure •Medium pressure •

An ultrasonic sound wave is pulsed two times per second from the base ofthe transducer. The sound wave reflects against the process mediumbelow and returns to the transducer. The micro-processor basedelectronics measure the time of flight between the sound generation andreceipt and translates this figure into the distance between the transmitterand process medium below.

Catalog No Model Description PriceFN5001 LU20-5001 Echotouch two-wire level $795.00

transmitter, loop poweredFN5003 LU20-5001-IS Echotouch two-wire level 850.00

transmitter, loop powered CSA Approved Intrinsically safe

AccessoriesFN334136 LC52-1001 Continuous relay controller 425.00

with LED displayPlease inquire for NIST Certification

The two-wire ultrasonic level transmitter is thecompact solution for non-contact continuous levelmeasurement in process vessels, storage tanksand open channels. The loop powered device provides accurate level measurement up to 16.5feet and is the ideal choice for more challengingcoating or scaling type liquids including sodiumhydroxide, wastewater, resin, wax, liquor andbleach. CE Compliant.

SPECIFICATIONSRange 0.5 to 18 feetAccuracy ± 0.25% of spanResolution 0.125" (3 mm)Frequency 50 kHzPulse rate 2 pulses/secondBeam width 8° conicalBlacking distance 6" minimumDisplay type 4 segment LCDDisplay units Inch / cmSupply voltage 12-36 VDCMax loop resistance 900 ohms @ 36 VDCSignal output 4-20 mA, 12-36 VDCSignal invert 4-20/20-4 mACalibration Push buttonFail-safe diagnostic Reverts to 4 mA or 22 mATemperature rating -40° to 140°F

-40° to 60°CTemp. compensation Automatic over entire rangePressure rating 30 psi @ 25°C, derated @ 1.667 psi

per °C above 25°CEnclosure rating NEMA 4X/IP65Enclosure mat’l PolypropyleneTransducer mat’l Polyvinylidene

FluorideMounting threads 2"NPT

• Non-Contact Level Transmitterwith 4-20 mA Output

• Accurate and Reliable LevelMeasurement from 0.5' to 16.5'

• Automatic TemperatureCompensation Over Full Range

• 8° Beam Allows Applications inRestricted Environments

• All Plastic Construction with PPand PVDF Materials

• LCD Digital Display IndicatesLevel in Inches or Centimeters

• Easy-Cal™ Push ButtonCalibration For All User SetPoints

• Echo-Map™ Signal LogicEliminates False Echo SignalReturns in the Tank

• Fail-Safe Intelligence ProvidesEcho Signal Loss Safety

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

FLOW

LINE SERIES


Use for applications with dirty, coating, scaling or corrosive type liquids

Flowline® Echotouch™ Long Range Ultrasonic Level Transmitter

Catalog No. Flange Type Transmitter Output PriceFN507003 3" ANSI/DIN80 4-20 mA, sourcing $1,095.00FN507004 3" ANSI/DIN80 4-20 mA, sinking 1,095.00FN507063 3" ANSI/DIN80 4-20 mA, sourcing 1,100.00FN507064 3" ANSI/DIN80 4-20 mA, sinking 1,100.00


• Accurate and reliable measurement from 1.5 to 40 feet• Integral relay for alarm or automatic filling or emptying• 8° beam allows application in restricted environments• Rugged NEMA 4X enclosure with PVC transducer/flange• Automatic temperature compensation over entire range• Easy-cal™ push button calibration for all user set points• LED digital display indicates level in inches or centimeters• Echo-Map™ filtration eliminates false echo signal returns• Fail-safe intelligence provides maximum process safety

SPECIFICATIONSRange 1.5 to 40' (.5 to 12.2 m)Accuracy ± 0.25% of span (air)Resolution 0.125" (3 mm)Frequency 26 kHzPulse rate 8 per secondBeam width 8° conicalBlocking distance 1.5' (.5 m) minimumDisplay type 4 segment LEDDisplay units Inch (cm)Memory Non-volatileSupply voltage 14-36 VDCConsumption 200 mACurrent flow source/sinkSignal output 4-20 mA, 14-36 VDCSignal invert 4-20 mA/20-4 mASignal averaging Fast/slowCalibration Push buttonRelay type SPDT, latchingRelay output 250 VAC, 10A, 1/2 hp.Relay mode Selectable, NO or NCRelay indication ON/OFF statusContact resistance 30 milliohmFail-safe diagnostics Relay reverts to safe positionTemperature rating -40 to 140°F (-40 to 60°C)Temperature comp. Automatic over entire rangePressure rating 30 psi (2 bar) @ 25 °C, derated @ 1.667

psi (.113 bar) per °C above 25°CEnclosure rating NEMA 4X (IP65)Enclosure material Polypropylene, U.L. 94VOTransducer material PolyvinylchlorideMounting threads 3" ANSI/DIN 80 flangeConduit connection 1/2" NPTCE compliance EN 50082-2 immunity


6.9” (175 mm

)

NIST it

Davis Inotek Instruments www.davis.com

J

Leve

l

888

Bürkert Ultrasonic Level Transmitter

Catalog No. Model Description PriceBU827 430827J Ultrasonic Level Transmitter — Plug, with DIN 1 1/2" NPT connector $903.00BU828 430828T Ultrasonic Level Transmitter — Entry, with DIN 1/2" NPT connector 893.00


SPECIFICATIONSProcessRange 1 ft - 32 ftAccuracy ± 0.25% of full scale

± 0.15% of full scale with calibration in Teach-In modeResolution ± 0.12 inchFrequency 50 kHzPulse rate 8 pulses per secondFull beam width 8 degrees conicalBlocking distance 12" from transducer baseDisplay type 15 x 60 mm LCD 8 digits, alphanumeric 15 segments, 0.35 inch highSupply voltage 18-32 VDCLoadat 32 V max. 1300at 24 V max. 1000at 18 V max. 550Medium temperature 40° up to + 176°FAmbient temperature -4° up to + 140°FTemperature adjustment Programmable according to gas mediumPressure rating max. 28 PSI at 77°FTransducer material PVDFEnclosure material PC, reinforced with 20% glass fiberEnclosure rating NEMA 4 (IP65)Mounting threads NPT 2"Signal invert 4-20 mA or 20-4 mA* in reference conditions (77°F, 14 PSI in air, on liquid without foam)

The Ultrasonic level transmitter combines an ultra-sonic sensor and a transducer with a large 8-digit multilanguage display in a splash-proof plasticNEMA 4 (IP65) enclosure.

The transmitter is powered with 18-32 VDC and fea-tures a three-wire 4-20 mA output for direct controlling acontinuous control valve, a PLC or for monitoring.

Easy and fast commissioning is guaranteed with the“Teach-In” and “Simulation” functions. Different tankshapes (cylindric, cubic, spheric) can be easily pro-grammed via fixed default shapes or at complex tankshapes step by step.

The measured value can be shown as a level, a dis-tance (in, cm, m, inch or feet) or direct as a volume (liter, m3, imp. gal, us gal).

Non-contact continuous level or volume measurementwith all liquids in open or closed vessels.

Teach-In function for easy commissioning

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


Level

J

Electronic Level Switch

• VersatileCan be used for level alarmand/or control of conductive andnon-conductive liquids, granularmaterials, foams, pastes, slurries,and interface applications

• Eliminates False Level DetectionThe innovative shield driver cir-cuitry enables the system toignore the effects of conductivematerial buildup on the level sen-sor surface.

• Flexible Relay SetupAn adjustable 0-20 second relaydelay time, together with normalor fail-safe operating modes, pro-vides versatile control functionconfiguration.

• Differential (Cyclic) ControlDifferential control enables twosetpoints to be established on thesensor

• Push-to-test VerificationHigh level (overflow) alarm oper-ation can be verified without actu-ally filling the vessel.

• Remote Mounting CapabilityThe sensor can be remotelymounted for applications withhigh temperature and/or highvibration

• Wide Range of ApplicationsThis system can control anymedia that has a dielectric con-stant between 1.5 and 80.0

• Multiple Power SuppliesThe Model 14L will operate onvarious power inputs from 115VAC or 230 VAC (50/60 Hz) to 12VDC or 24 VDC.

• RuggedSolid state electronics housed ina cast aluminum explosion-proofenclosure.

The Model 14L RF electronic level switch, housed in a castaluminum explosion-proof enclosure, is ideal for alarm and/orcontrol of conductive and non-conductive liquids, granular ma-terials, foams, slurries, and interface applications. An ad-justable 0-20 second relay delay time, together with normal orfail-safe operating modes, provides versatile control functionconfiguration for your application requirements. Differential(cyclic) control enables two setpoints to be established on thesensor. The relay state changes when the level reaches the sec-ond setpoint and remains in this state until the level falls be-low the first setpoint. This system can control any media thathas a dielectric constant between .5 and 80.0 (light hydrocar-bons, plastic pellets to water, acids, and slurries).

The sensor is energized with a radio frequency signal. Asthe media level changes, the capacitance of the sensor changes,resulting in a change in radio frequency signal. This frequencychange is compared with a preset value stored in the measur-ing circuit and used to actuate a relay for alarm and/or control.The design of the Model 14L contains an innovative shield dri-ver circuit, enabling it to ignore the effect of conductive materi-al coatings.

Typically, the sensor is integrally mounted to the Model 14Lhousing. The sensor can also be remotely mounted for applica-tions with high temperature and/or high vibration. The sen-sors are manufactured in a variety of metals and insulatingmaterials. The active measurement length of the sensor variesdepending on the application requirements. The sensor may bemounted in a vertical or horizontal position. Normally, the sen-sor is threaded into a process vessel with a 3/4-inch NPT connection

Common measured process materials• Conductive Liquids:

Water, acid, caustic, etc.• Organic Solvents:

Ethylene, methyl or isopropyl alcohol, toluene, heptane, turpentine, acetone, etc.

• Hydrocarbons:Crude or refined oil, kerosene,ethylene glycol, gasoline, etc.

• Interface Liquids:Hydrocarbons and water

• Bulk SolidsSPECIFICATIONSSensor Specifications

Wetted Materials 316 SS and TFE Teflon®Maximum Temperature 450°F (232°C)Model 4000L 1/4-inch rod diameter (3/8-inch with insulation)

General Purpose sensor for non-coating applications with 3/4-inch NPT process connection.

Model 4100L 1/2-inch rod diameter (3/4-inch with insulation) Heavy Duty sensor for non-coating applications with 1-inch NPT process connection.

Model 4401L 3/8-inch diameter Driven-shield sensor for coating applications with 3/4-inch NPT process connection.

Model 14L SpecificationsSensitivity 0.2 pF or betterTemperature Range -40 to 160°F (-40 to 71°C)Drift 0.003 pF per °FAdjustment Range 0 to 250 pF, zero and optional differentialProtection RFI, EMI, and static chargePower Requirement 115 or 230 VAC, 50/60 Hz; 12 or 24 VDC; 6 wattsmax.Enclosure Cast aluminum, NEMA 4, 7 and 9 (weatherproof,

hose-down, dust and vapor explosion-proof)Relay Functions:Output (1 relay) DPDT, two Form C contacts, 5A resistive at

15/230 VAC and 30 VDC Time Delay 0-20 seconds, field-selectable to delay on pull-in,

drop-out, or both waysFail-Safe High or low level, field-selectable

Catalog No. Model Description PriceGL14401 14L1A0NN RF electronic level switch in a cast aluminum enclosure (115 Volts, 50/60 Hz) $395.00GL14402 4000L 316SS (bare) General Purpose sensor for non-coating applications 145.00

(specify length in inches) plus .50/in.GL14403 4001L TFE Teflon® insulated General Purpose sensor for non-coating applications 145.00

(specify length in inches) plus .50/in.GL14404 4100L 316SS (bare) Heavy duty sensor for non-coating applications 175.00

(specify length in inches) plus .90/in.GL14405 4101L TFE Teflon® insulated Heavy Duty sensor for non-coating applications 175.00

(specify length in inches) plus .90/in.Please inquire for NIST Certification

NIST it


J

Leve

l

890

Level Transmitter and Sensors

The Model 690L non-indicating level trans-mitter, housed in a cast aluminum explosion-proof enclosure, provides a continuous 4-20mA output representing the level in a vessel.The isolated output features adjustabledamping for turbulent applications and fieldselectable direct or reverse acting operation.Enhanced anti-coat circuitry minimizes falselevel detection caused by conductive materialcoatings on the sensor. Optional remotemount accessories allow the transmitter to beinstalled up to 150 feet from the level sensor.The active measurement length of the sensorvaries depending on the application require-ments. The sensor, normally mounted verti-cally, is threaded into a process vessel with a3/4-inch NPT connection.

SPECIFICATIONSAmbient Conditions -40 to 160°F (-40 to 71°C)Power Requirements 18 to 35 VDCAnalog Output Isolated 4-20mA, field-selectable for direct or

reverse actingOutput Load Maximum Loop Load

(in series with 690L and power supply)550 ohms with 24 VDC power supply1100 ohms with 35 VDC power supply

Note: For long cable runs, the resistance of the wire must be considered, and itmay decrease maximum load capacity.Output Damping Adjustable, 0.1 to 10 secondsProtection RFI, EMI, and static chargeZero Adjustment Range 0 to 500 pFSpan Adjustment Range 10 to 10,000 pFZero/Span Ratio 10 to 1 maximumLinearity 0.5% of full scaleTemperature Stability Greater of 0.01 pF per °F -or- 0.1% of span per °FEnclosure Cast aluminum with urethane finish,

NEMA 4, 7 and 9 (weatherproof, hosedown, dust and vapor explosion-proof)

Catalog No. Model Description PriceGL69901 690L0F1A0NN Level transmitter in a cast aluminum enclosure $745.00GL14403 4001L TFE Teflon® insulated General Purpose sensor for non-coating applications 145.00

(specify length in inches) plus 1.20/in.GL14405 4101L TFE Teflon® insulated Heavy Duty sensor for non-coating applications 175.00

(specify length in inches) plus 2.50/in.GL14406 4204L PFA Teflon® insulated Enhanced Performance sensor for coating applications 165.00

(specify length in inches) plus 1.45/in.GL14407 4304L PFA Teflon® insulated Flexible Cable sensor for non-coating applications 245.00

(specify length in inches) plus 1.60/in.Please inquire for NIST Certification

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


Level

J

Capacitance Point Level ProbeFor Liquids or Bulk Solids

Catalog No. Model Description PriceDV725101 511 B Level Control with NEMA 4 housing $345.00ProbesDV725102 GIMN 14" Probe for dry products, non-corrosive 145.00DV725103 GT 18" Probe for liquids, corrosive products 245.00


VersatileA single calibration permits theapplication on any product with adielectric constant from 1.5 (lighthydrocarbons, plastic pellets) to80.0 (water, acids and slurries)

Fail SafeA simple field selection determinesthe High or Low FAIL-SAFE mode

Immune to Product BuildupA “Guarded Probe” prevents anyshift or loss of calibration due tobuild up of conductive or non-conductive materials

High SensitivitySensitivity is .5 pfd or less. The CapPoint/511 system will reliably detectany product whose dielectricconstant is 1.5 or higher withoutfield calibration. Products withdielectric constants lower than 1.5will require field calibration

RuggedTotally solid state electronicsmounted in an explosion proof castaluminum housing

Immune to StaticThe probe input circuit is protectedfrom static electrical discharges

RFI ImmunityThe circuit is immune to RFI

Power SupplyThe Cap Point/511 will operate witheither 115 VAC, 230 VAC 50-60 Hzpower source or 24 VDC

VersatileA field adjusted time delay isavailable to provide protection fromturbulent level conditions

Shop CalibrationThe CAP POINT/511 system isdesigned to be installed without fieldcalibration in most applications

The Cap Point/511 systemconsists of an electronic amplifi-er mounted in a cast aluminumexplosion proof housing. Thishousing is integrally mountedon the rear of the probe. TheCap Point/511 always uses ei-ther a F.P. (guarded polypropy-lene) or GT (guarded Teflon®)probe assembly (see below).

Probes are manufactured ina variety of insulating materi-als and metals. The activelength of the probe will varysubject to the specific applica-tion of the system. The probemay be mounted in a vertical orhorizontal position. Normally,the probe is threaded into theprocess vessel with a 3⁄4" connec-tion. The probe is energizedwith a radio frequency signal(about 2 megahertz). When theprocess level changes, a change of capacitance occurs, resultingin a small change in frequency. This change is compared withpreset values in the electronic measuring circuit. After properamplification, this signal is used to provide a change of statecondition which operates the relay.

The CAP POINT/511 is pre-calibrated to operate in any sizevessel, provided the tank's physical dimensions are greaterthan one foot in diameter. Smaller vessels or probes installedin pipes must be dynamically calibrated, i.e. installed in

process vessel and calibrated to your exact conditions.Installation with products that have dielectric constants of lessthan 1/5 should be dynamically calibrated. The pre-calibrationpermits application to the control of any product with a dielec-tric constant from 1.5 to 80.0 (light hydrocarbons, plastic pel-lets to water acids and slurries). A time delay is provided toeliminate the effects from turbulence.

The CAP POINT/511 utilizes a guarded probe that eliminatesany shift in control point due to build up of product.

The CAP POINT/511 is an ideal solution for many level controlproblems. Most liquids are potential applications for the Cap Point/511 as are free flowinggranular products.• Liquids-Petroleum Products:

Eg: Crude Oil, Refined Oil,Kerosene, Ethylene Glycol,Gasoline, etc.

• Liquids-Organic Solvents:Eg: Ethylene, Methyl and IsopropylAlcohol, as well as Toluene,Heptane, Turpentine, Acetone, etc.

• Liquids-Conductive:Eg: Water, acids, diluted acids(within the limits of probe sensorgland housing and insulation mate-rials), water with impurities

• Liquids-Interface: Eg: Petroleum products and water(with calibration)

• Bulk Solids:Eg: Cereal grains, plastic pelletsand powders, sand, ores, crushedcoal, coke and other free flowinggranular products*Note: Resistance to corrosion isdetermined by insulating materials

NIST it

AMPLIFIER SPECIFICATIONSSupply Voltage Nominal Absolute Limit

115 VAC 90-135 VAC230 VAC 180-270 VAC24 VDC 28 VDC max., 12 VDC min.

Power Less than 3 Volt-AmperesFrequency AC Power 50-60 Hz, 45 Hz. min.Output Relay, from C SPDT switchRatings 5A @ 115 VAC non-inductive

2.5A @ 240 VAC non-inductive3A @ 26 VDC non-inductive

Time Delay Field adjusted 50 MS to 15 SFail-safe Switch selectable High level or Low levelHigh level Fail-safe Position Relay is de-energized when liquid is presentLow level Fail-safe Position Relay is de-energized when liquid is not presentIndicators Two, light emitting diodes (LED).

RED-Illuminated when probe capacitance is greater than set point. YELLOW-Illuminated when relay is energized

Temperature -40°F to 160°F (-40°C to 70°C)Range (amplifier) Stability Sensitivity ± .01%/°FHousing Cast aluminum with fused polyester finish. Meets NEMA 4, 5, 6, 7, 9,

& 12; NEC Class I, Group C, D; Class II, Group E, F, & G

PROBE SPECIFICATIONS14" Probe 3⁄4" NPT process connection; steel with zinc plate; length fixed;

polypropylene insulation18" Probe 3⁄4" NPT process connection; 316 Teflon® insulation; length variable

2-year warranty

Teflon—Reg TM E.I. duPont de Nemours & Co.


J

Leve

l

892

Point Liquid Level SwitchThe sensor is a magnetostrictive device consisting of a

diaphragm, nickel tube, magnet, drive coil and pickup coil When 40 kHz energy is applied to the drive coil, it caus-

es the diaphragm to vibrate at a frequency determined bythe mechanical resonant system of the sensor. Electricalenergy is transferred to the pickup coil when the di-aphragm is free to move in gas. When the diaphragm mo-tion is loaded by a process material, less energy is trans-

ferred to the pickup coil.The pickup coil of the

sensor is connected to theinput of an amplifier andthe output of the amplifierto the drive coil to form afeedback loop circuit. Anyenergy appearing in the out-put of the sensor will be fedto the amplifier, amplified,and returned to the input ofthe sensor. This causes vi-

brations at 40 kHz to occur in the diaphragm and furnish asignal back to the amplifier for reamplification. When thegain of the amplifier is adjusted so as to exceed the losseswithin the sensor, continuous oscillations are produced.

If the diaphragm of the sensor is exposed to a processliquid product which offers greater mechanical resistanceto the motion of the diaphragm, the transfer of energy tothe pickup coil decreases. This results in a decrease in the

signal feedback into the am-plifier and a correspondingdecrease in the signal avail-able from the output of theamplifier. The decreasedsignal triggers a voltagesensitive network that con-trols the output relay.

A unique AUTO TESTself-checking circuit con-stantly verifies the integrityof the sensor circuits. TheRED LED is illuminatedwhen the product is presentat the sensor and the systemis not oscillating at approxi-mately 40 kHz. If the ampli-tude or the frequency of thesensor circuits changes, theRED LED will come on. Ifthe change of state occursdue to a level change, the re-lay will follow and changeits state. However, if thechange of state is due to asensor failure or some othercomponent failure, the relaywill immediately transfer tothe alarm condition. Thisfoolproof feature protectsthe system for loss of power,major component failure ordamaged sensor conditions.The SONAC®/110B systemwill fail safe for all sensor orcomponent failures exceptfor open sensor in the lowlevel fail safe mode.

Function• Single Point Switch for On-Off

Control of Liquids

Typical uses• High Level Alarm or Control• Pump Control or Inlet Starvation

Alarm• Flow/No Flow Indication• Low Level Alarm or Control

SPECIFICATIONSInput Voltage Nominal Absolute Limits

115 VAC 90-135 VAC230 VAC 180-270 VAC24 VDC ± 4V

Frequency, AC Power 50-60 HzDelay Time Range 50 m Sec. Min.-10 Sec. Max.;

long delay, 30 sec. max.Fail-safeSwitch selectable High Level or Low LevelHigh Level Relay is de-energized when product is present (wet).Fail-safe PositionLow Level Relay is de-energized when product is not Fail-safe Position present (dry).Indicators Two light emitting diodes (LED)

YELLOW-Illuminated when relay is energizedRED-Illuminated when product is present at sensor.

Amplifier Ambient -40°F to 160°FTemperature Rating Output Ratings Relay, DPDT 2 Form C contacts; 5A at 120 VAC

non-inductiveHousing Cast aluminum with fused polyester finish; meets

NEMA 4, 5, 7, 9, & 12 NEC Class I Group C,D; Class II Group E, F, & G

Sensor Pressure 2000 psi (max.)Temperature -65° to 220°F (sensor)

Cat. No. Model Description PriceDV841101 110B Compact Liquid Level Switch $365.00

SensorsDV841103 95TA General Purpose Sensor with Non-stick Teflon® 345.00DV841104 93 Sanitary (USDA approved for 380.00

AAA Sanitary ServiceDV841105 94S General Purpose 316 Stainless Steel 255.00DV841106 99 Hastelloy “C” for Corrosive Chemicals 750.00

When ordering, please specify required sensorPlease inquire for NIST Certification

• Where liquids to be sensed con-stantly change physical or electricalproperties. The SONAC®/110 prin-ciple of measurement is used withextremely small vessels or pipesand when little or no intrusion intothe process is required

• Non-dedicated vessels-liquids• The device senses virtually any liq-

uid and does not need adjustmentwhen the density or dielectric con-stants are changed

• High temperature, high pressureservice

• The welded, all stainless steel sen-sor body is designed for service attemperatures to 220°F (104°C) andpressures to 2000 psig

• Fluids with foam blankets• The control ignores foam to indi-

cate the true liquid level• The SONAC®/110B provides the

most reliable overflow alarm orcontrol available

Auto Test self-checkingThe unique self-checking feedbackloop constantly "proves" that the control is working properly and offers superior reliability in criticalapplications.

Really Fail-safeThe SONAC®/110B is designed sothat any electrical or mechanical fail-ure of sensor or component willcause a change of state to the FailMode. Redundant circuit compo-nents are used in critical locations.

Stable, dependable performanceThis sensing technique provides awet/dry ratio of 100:1 to providedependable performance year in andout, without periodic adjustment.No false trips due to surge of splash-ing liquids

CompactThe electronic amplifier is located inan integral explosion proof housingthreaded to the rear of the sensor.

Versatile power supplyThe standard units are designed toaccept 115 VAC, 230 VAC or lowvoltage DC input power.

Non-intrusiveThe sensor need not extend into the vessel beyond 1⁄4". This featureminimizes the possibility of productbridging.

RuggedThe all stainless steel, heavy dutysensor resists damage from productabrasion or corrosion. No packingglands are used.

CSA Approved

FM Approved

2 year warranty

NIST it


Level

J

Capacitance Continuous Level Probe

• Immune to product build-up —The CAP ANALOG/4100 system willtolerate heavy build-up of conductivematerials without loss of calibration

• Two Wire —True two wire circuit. Use ordinarytwisted pair wire, 4 to 20mA DC Signal

• Rugged — Totally solid state electronics mounted inan explosion proof cast aluminumhousing, with fused polyester finish forenhanced corrosion resistance

The CAP ANALOG/4100 system consists of an electronicamplifier mounted in a cast aluminum explosion proof hous-ing. This housing normally is integrally mounted on the rear ofthe probe.

The CAP ANALOG/4100 system is Capacitance Probe LevelTransmitter — a true two wire DC powered system.

Probes are manufactured in a variety of insulation materi-als and metals. The active length of the probe will vary subjectto the specific application of that system. The probe usually ismounted in a vertical position. Normally the probe is threadedinto the process vessel with a 3⁄4 " NPT connection.

Catalog No. Model Description PriceDV724101 4100 Level transmitter $820.00DV724102 THD 1⁄2" Heavy duty teflon® probe 200.00

Assembly Solid ProbeDV724103 Solid rod per foot (20 ft. Max.) 2.50DV7241031 TF Flexible Probe 400.00DV724104 KF Kynar® (PVDF) Flexible Probe 1" NPT 400.00DV724105 Flexible probe length per inch (150' max) 1.70

When ordering please specify required probe and cable length

SPECIFICATIONS-AmplifierSupply Voltage Nominal Load

24VDC 600Ω at 20mA18VDC 300Ω at 20mA13VDC 50Ω at 20mA

Power Less than 2 volt-amperesOutput 4-20mA DC, 600Ω maximum with 24VDC power supplyReverse Output 20-4mA DC, 600Ω maximum Switch SelectableImmunity Immunity to build-up of conductive liquidsSpan (pfd) Range 1 Range 2 Range 3 Range 4

Min 15 Min 60 Min 400 Min 2500Max 100 Max 600 Max 4000 Max 30,000

Temperature Range (Amplifier) -40°F to + 160°F (-40° to + 70°C)Housing Cast Aluminum

Meets NEMA 4, 5, 7, 9, & 12NECClass I Group C & D Class II Group E, F, and G

2 Year Warranty

2 Wire Transmitter, 4-20mA Output

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


J

Leve

l

894

Point Liquid Level SwitchFeaturing a High Temperature Sensor

Function• Single Point Switch for On-Off Control

of Liquids

Typical Uses• High Level Alarm or Control• Pump Control or Inlet Starvation

Alarm• Flow/No Flow Indication• Low Level Alarm or Control

Catalog No. Model Description Price

DV84120 120 Level Control with NEMA 4X housing $545.00

Sensors

DV84221 21 General Purpose Sensor, 347 Stainless Steel-Temp. Range: -65°F to 400°F 335.00

DV84222 22 High Temperature Sensor, 347 Stainless Steel-Temp. Range: -65°F to 400°F 480.00

DV84224 24 General Purpose Sensor, Sintered Teflon® Coated for non-stick-347 S.S.- 480.00Temp. Range: -65°F to 220°F

DV84225 25 High Temperature Sensor, Sintered Teflon® Coated for non-stick-347 S.S.- 525.00Temp. Range: -65°F to 400°F

DV84227 28 Sanitary-Ladish Fitting Sensor, USDA Approved for AAA Sanitary Service-347 S.S.- 500.00Temp. Range: -65° to 220°F

DV84228 21H Hastelloy “C” Sensor, for Corrosive Chemicals-Temp. Range: -65° to 220°F 810.00

Cables

DV84125 23277 General Purpose 50' PVC Cable Assembly used with sensors #21 175.00

DV84124 23278 General Purpose 100" PVC Cable Assembly used with sensors #21 215.00

DV84126 23273 High Temperature 15' Teflon® Cable Assembly-Temp. Range: Exceed 200°F (93°C) 200.00

DV84127 23274 High Temperature 30' Teflon® Cable Assembly-Temp. Range: Exceed 200°F (93°C) 255.00(When ordering, please specify Level Control, Sensor Required, and Sensor Cable Assembly)


The SONAC®/120 is a reliable levelcontrol that will sense almost any liquid.Its failsafe features insure positive levelcontrol in critical processes. The non-intrusive features of its sensor permitits installation in extremely small ves-sels and pipesNon-dedicated vessels-liquids• The device senses virtually any liquid

and does not need adjustment whenthe density or dielectric constants arechanged

High temperature, high pressure service• The welded, all stainless steel sensor

body is designed for service at tem-peratures to 4000°F (205°C) andpressures to 2000 psig

Fluids with foam blankets• The control ignores foam to indicate

the true liquid levelCryogenic fluids• Series 26 sensors are designed for

service at fluid temperatures to -425°F(-255°C) Please inquire

Precision level control requirements• Repeatability to 0.050 in. standardCorrosion resistant sensors• Standard sensor is 347 SS Optional

models are available in Carpenter 20,Hastelloy C or 316 SS

SPECIFICATIONSInput Voltage Nominal Absolute Limits

115 VAC 90-135 VAC230 VAC 180-270 VAC24 VDC ± 4V

Power 3 VAFrequency, AC Power 50-60 HzTime Delay Adjustable non-integrating on wet, dryDelay Time Range 50 m Sec. Min-10 Sec. Max.; Long Delay, 30 sec. max.Probe 1" NPT mountFailsafe • Switch Selectable-High Level or Low Level

• High Level Failsafe Position-Relay is de-energized when product is present (wet).• Low Level Failsafe Position-Relay is de-activated when product is not present (dry).

Indicators Two, light emitting diodes (LED); YELLOW- Illuminated when product is energized; RED-Illuminated when product is absent at sensor

Operating Temperature -40° to 160°F (-40° to 71°C)Output Relay, DPDT Form CRatings 5A at 120 VAC Resistive

NIST it

The sensor is a magnetostrictive device consisting ofa diaphragm, nickel tube, magnet, drive coil and pick-up coil.

If the diaphragm of the sensor is exposed to a liquidmaterial, which offers greater mechanical resistance tothe motion of the diaphragm, the transfer of energy tothe pickup coil decreases. This results in a decrease inthe signal feedback into the amplifier and a corre-sponding decrease in the signal available from the out-put of the amplifier.The decreased signal triggers avoltage sensitive network that controls the output re-lay.

A unique AUTO TEST self-checking circuit con-stantly verifies the integrity of the sensor circuits. TheRED LED is illuminated when the product is absent atthe sensor and the system is oscillating at approxi-mately 40 kHz. If the amplitude or the frequency of thesensor circuits changes, the RED LED will go out. Ifthe change of state occurs due to a level change, the re-lay will follow and change its state. However, if thechange of state is due to a sensor failure or some othercomponent failure, the relay will immediately transferto the alarm condition. This foolproof feature protectsthe system for loss of power, major component failureor damaged sensor conditions.


Level

J

Submersible Liquid Level Transmitters

Catalog No. Range PriceWK4262761 0 - 100 Inches WC $349.00WK4262779 0 - 150 Inches WC 349.00WK4262787 0 - 250 Inches WC 349.00WK4262809 0 - 5 psi 349.00WK4262817 0 - 10 psi 349.00WK4262825 0 - 15 psi 349.00WK4262883 0 - 25 psi 349.00WK4262841 0 - 30 psi 349.00WK4262850 0 - 50 psi 349.00WK4262868 0 - 100 psi 349.00

AccessoriesNISTPR132 NIST Traceable Certificate 99.00NISTPR133 NIST Traceable Certificate with Data 130.00NISTPRQ132 2 Year NIST Traceable Certificate 148.00NISTPRQ133 2 Year NIST Traceable Certificate with Data 195.00

SPECIFICATIONSAccuracy ± 0.25% Best Fit Straight LineWetted Parts 316SS, polyurethane, polyamidCase 316SSPressure Connection G1/2BPower Supply 10 – 30 V DC, includes

5 foot vented cableSignal Output 4 – 20mA

WIKA LS-10 submersible liquid level transmit-ters and transducers are engineered for a wide va-riety of industrial and municipal liquid level mea-surement applications. Each transmitter under-goes extensive quality control testing and calibra-tion to achieve an accuracy < 0.25% full scale. Theprinted circuit boards use state-of-the-art surfacemount technology for protection against mechani-cal shock and vibration. Each is temperaturecompensated to assure accuracy and long-termstability when exposed to severe ambient temper-ature variations.

The transmitter features a watertight, ventedpolyurethane cable that can withstand over 220pounds of strain. This allows the transmitter tobe supported without any additional cabling. Thetransmitter meets NEMA 6P and IP 68 require-ments for submersion up to 300 feet.

This compact, rugged submersible pressuretransmitter is suitable for applications in levelmeasurement, water and wastewater treatment,well depth measurement, and offshore waterdepth measurement.

NIST it

Save 50%on 2nd year

recalibration

Ask about2 YearNIST


J

Leve

l

896

Level, Volume, Flow & Differential Level Ultrasonic Sensor System

• Measures level, volume, flow, and differential level• Available with FM Class I, Div I hazardous ratings• Microprocessor with E2 memory retains settings

on power loss• Temperature compensated to maintain accuracy

Catalog No. Model Description PriceLD7720021 DCR-1003 Controller, NEMA 4X windowed enclosure with membrane keypad, LED display and 4 relays. $800.00

Operates from 110/220 V AC (requires use of DST sensor).LD7720022 DCR-1004 Same as DCR-1003 with 4-20 mA analog output (requires use of DST sensor). 850.00LD7720023 DCR-1004-3 DCR-1004 with a 0-5 V output option 850.00LD7720024 DCR-1004-4 DCR-1004 with a 0-10 V output option 850.00SensorsLD772003 DST-1001 Remote Sensor head with electrostatic transducer, stainless steel case, temperature compensation 549.00

and 6' (1.8m) of cable. .6 to 35’ rangeLD772005 DST-1002 Remote Sensor head with PVC transducer and case, temperature compensation, and 10' (3m) of cable. 649.00

3" NPT mounting. 1.5 to 35' range. FM Class I Div. ILD10040 DST-1004 Remote sensor head with Teflon® faced flange transducer and a 3" 150 # flange mount, PVC housing 725.00

with 10' (3m) of cable. 1.5 to 35" rangeLD10070 DST-1007 Remote sensor head with PVC transducer and housing, temperature compensation, and 10' (3m) of cable 549.00

1 to 16' range. 2" NPT mountingLD10080 DST-1008 Same as the DST-1007 with a 2" 150# Teflon® faced flange transducer 649.00


SPECIFICATIONSDCR-1001 DCR-1002 DCR-1003 DCR-1004

Outputs 4 NPN trip points 4 NPN trip points 4 form “A” relays 4 form “A” relays (200 mA @ 24 V) (200 mA @ 24 V) and 4 - 20 mA (5 A 240 V AC) (5 A 240 V AC) and 4 - 20 mA

Supply Voltage 12 - 24 V DC 12 - 24 V DC 110/220 V AC 110/220 V ACTotal Current Draw 60mA max 110mA with DST 80mA max 130mA with DST 0.10A 0.10AResolution 0.1" (2.54 mm) 0.1" (2.54 mm) 0.1" (2.54 mm) 0.1" (2.54 mm)Operating Temperature -30° to 60°C -30° to 60°C -30° to 60°C -30° to 60°CDimensions 6.3" x 3.15" x 2.2" 6.3" x 3.15" x 2.2" 6.5" x 8.5" x 4.25" 6.5" x 8.5" x 4.25"

(160 x 40 x 56 mm) (160 x 40 x 56 mm) (165 x 216 x 108 mm) (165 x 216 x 108 mm)

DST-1001 DST-1002 DST-1004 DST-1007 DST-1008Application dry stable wet corrosiveOperating Range 0.6' - 35' 1' - 35' 1' - 35' 1' - 16' 1' - 16'

(0.18 - 10.6 m) (0.45 - 10.6m) (0.45 - 10.6m) (0.45 - 4.8m) (0.45 - 4.8m)Transducer Type electrostatic ceramic PVC faced ceramic Teflon® faced ceramic PVC faced ceramic Teflon® facedRating NEMA 12 IP53 NEMA 6p. IP65 NEMA 6p. IP65 NEMA 6p. IP65 NEMA 6p. IP65Operating Temperature -30° to 60°C -30° to 60°C -30° to 60°C -30° to 60°C -30° to 60°CAccuracy 0.25% of range with not temperature gradientDimensions 2.35" dia. x 3.5" 3.5" dia. x 7" 3.5" dia. x 6" 2.35" x 7" 2.35" dia. x 7.7"

(59 x 89mm) (89 x 179mm) (89 x 152mm) (60 x 179mm) (60 x 195mm)


Level

J

Water Level Meters NIST it

Hand-Held Water Depth Gauge

Contact of the electrode assembly with thewater surface is indicated by an LED and thesound of the audio alert beeper.

The lead electrode assembly is 3/8” in di-ameter and is easily replaceable in the field.The cable is two-conductor, steel and copperplated, with a tensile strength of approxi-mately 300 lbs and a tough plastic type insu-lating jacket. It is mounted on a small hand-held spool and stand which can be used con-veniently to let out or withdraw the cable andelectrode assembly.

Depth indication is provided by numberedmetal tags securely crimped to the cable atintervals of five feet.

Catalog No. Model Description Length PriceFI792101 WLT100 Water Level Indicator 100' $270.00FI792102 WLT200 Water Level Indicator 200' 310.00FI792103 WLT300 Water Level Indicator 300' 350.00FI792104 WLT400 Water Level Indicator 400' 390.00FI792105 WLT500 Water Level Indicator 500' 430.00

Catalog No. Model Description PriceSD5000 SM-5 Depthmate portable sounder $185.00SD5001 SM-5A Depthmate portable sounder with external transducer 209.00

• Reads in Feet or Meters, to the nearest tenth through asolid hull, inflatable bottom, or black ice. This is anextremely accurate unit when used properly.

• 400 kHz with 6° beam angle• Reads from 2 feet to 260 feet• Each reading is backlit and stays displayed for ten sec-

onds. Simply put the head in the water, or against thesolid hull of a boat. Sonar will not read through air.

SPECIFICATIONSFrequency 400kz (Beam Angle 6°)Waterproof To 160 feet; 50 metersRange 2-260 feet or .6-79 metersPower Standard 9V dry cell battery

(good for 500 10 second readings)Measures 7.7 x 1.7 inches (198 x 42 mm)Weighs 10 oz. / 300 grams

This unique pocket-sized depth sounder is very accurate andof very high quality. It is useful for boating, fishing, scuba div-ing, coastal survey, and scientific work.

Save 50%on 2nd year

recalibration

Ask about2 YearNIST

liquid level switches · is ideal for industrial environments. float level switches (not shown) are...

Documents