linkbasic catalogo cableado estructurado 2013
TRANSCRIPT
COPPER SYSTEMS
www.linkbasic.com
Cableandnetconnectorassemblies
. 2 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
BRIEF INTRODUCTION Our professions
Our qualification
Our quality
Suzhou Plant
Test Test
Test Test
Linkbasic is a total solution supplier of professional integrated cabling and cabinet related products. In the past 15 years, we have been dedicating ourselves to providing copper cable and fiber optical cable solutions used in voice, video, and audio signal transmission.
Linkbasic fully dedicates itself to the job of fulfilling all clients’ requirement, seizing new technology trends and investing more in developing new products as well. Our innovation endows the products such features like good expansibility, easy usage and high efficiency. As a prominent total cabling solution supplier, High qualified designers of linkbasic keep designing, developing and working out innovative solutions for clients all over the world. Advanced end to end solution helps all kinds of enterprises enjoy a high speed and safe data transmis-sion in communication network.
We keep exceeding and dedicating ourselves to establish a high level marketing team in both mainland and abroad. and make our products the best choice all over the world. Linkbasic has sales representatives and distribution channels in 6 continents. The full range of products and service resources can meet the requirements of clients from regions and worldwide. Every member of the team cooperation with each other to satisfy the clients. All the measures we take above serve one aim, which drives linkbasic a long-term development. And provide clients from different industries and religions with even reliable and better services.
Professional technical staffs of linkbasic willtry our best to offer the help from the very beginning of project evaluation to the fulfillment of network communication, and whatever the stage of your project is, it is our honor to provide you all-round service.
We emphasize on communicating with our clients, and try to get to know what they need. Our team is composed by system designers, Installation partners and technicians. And we emphasize on evaluating and complying with clients’ requirements. As a result, many enterprises are satisfied with our solution because they know we are able to make the tough job of data transmission much easier.
Manufacturing standards: linkbasic put quality in the first place. To ensure the high standard of quality all the factories involved in manufac-turing has passed ISO 9000 certification.
Environmental standards: We have obtained ISO14001 environmental management system certification which requires extensive environment-friendly process and policy to minimize the affection to the environment and to Comply with environmental regulations. Our ISO14001 environmental auditing scheme includes the raw material and internal management system. We have internal flows to pay close attention to the law and the trends of resource development.
Industrial standards: Linkbasic completely follow the relevant industry standards of wiring network. All products relevant exceed TIA/EIA and ISO the structured cabling standards. Network cabinets and related products are comply with ANSI/EIARS-310-D, DIN41491;part1, IEC297-2, DIN41494;part7,and GB/T3047.2-92.
As a end-to-end solution provider, Linkbasic offers a 15-year quality guarantee of products, system performance and application. it is applicable to all our structural cabling solutions which save troubles once for all for all clients, ensuring that the cabling system can meet clients’ requirement now and in the next few years.
We regularly pick trained and certificated engineers to support this comprehensive quality assurance. The combination of this kind of training and quality assurance ensures the lifetime support for the clients’ network facility construction.
You can contact local authorized agent or fill in the inquiry form if you want to further know our quality assurance.
. 3 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6A SYSTEM PRODUCTS
4 TWISTED PAIR CAT 6A CABLE 4-5
6-7
8-9
10
CAT 6A KEYSTONE JACK
CAT 6A PATCH PANEL
CAT 6A PATCH CABLE
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: CLA04-SC6A
P/N: PNG24-SC6A
P/N: JKG06-SC6A
P/N: CAA01-SC6A-*-#
. 4 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
CAT 6A SOLID CABLE P/N: CLA04-SC6A CLA04-UC6A
Insulation
Polyester Tape
Filler
AL foil
Drain Wire
Outer Jacket
ConductorCross sectionCLA04-SC6A
CLA04-UC6A
Conductor
Drain WireFiller
Insulation
AL foil
Outer Jacket
Polyester Tape
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B.2-10& ISO/IEC 11801, IEC 61156Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel,Reel in Box
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN1000Base-T1000Base-TX155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
FTP4 Pair23AWG0.585Solid Bare Copper
HDPE1.151.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnYesNoYes (AL Foil)Yes (Tinned Copper)PVC or LSZHBased On Customer Requirements 7.2 ± 0.3
MECHANICAL CHARACTERISTICS
Operating Temp. RangeMax. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~70℃110N
8 x O.D.CMR
ELECTRICAL CHARACTERISTICS
MAX. Matual Capacitance @ kHzMAX. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMni. Insulation resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF 11 DOM≤330pF /100M
65%
45ns/100M7.32Ω /100M (23AWG)
≤5%
5000
300V
10 G
P/N: CLA04-SC6A CLA04-UC6A
Insulation
Filler
Rip cord (optional)
AL foil
Outer Jacket
ConductorCross section
. 5 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6A SOLID CABLE P/N: CLA04-SC6A CLA04-UC6A
Cat 6A FTP solid cable Cat 6A UTP solid cable
CLA04-SC6A
TIA/EIA 568-B.2 ELECTRICAL CHARACTERISTICS
Frequency
(MHz)
16
20
31.25
125
250
300
400
Input Impedance
(Ohms)
100±15
100±15
100±15
100±20
100±22
100±25
100±25
ATT
(DB/100m)
7.5
8.4
10.5
21.5
31.1
34.3
40.1
RL
(Db)
20
20
18.6
14.4
12.3
11.8
10.9
NEXT
(Db)
54.2
52.8
50
40.8
36.3
35.1
33.3
PSNEXT
(Db)
54.2
52.8
49.0
40.8
36.3
35.1
33.3
ELFEXT
(Db/100m)
43.7
41.8
37.9
25.9
19.8
18.3
15.8
PSELFEXT
(Db/100m)
40.7
38.8
34.9
22.9
16.8
15.3
12.8
TCL
(Db)
38.0
37.0
35.1
29.0
26.0
25.2
24.0
DELAY
(Ns/100m)
543.0
542.0
540.4
537.2
536.3
536.1
535.8
PSANEXT
(Db)
67.0
67.0
67.0
61.0
56.5
55.3
53.5
PSACCRF
(Db)
54.1
52.2
48.3
36.3
30.2
28.7
26.2
ORDER INFORMATION
RAL 7035 RAL 7035
Cat 6A FTP solid cable Cat 6A FTP solid cable Cat 6A FTP solid cable RAL 7035RAL 7035 RAL 7035
CLA04-SC6A-CMRCLA04-SC6A-LSZH CLA04-SFC6A
Part number
CLA04-SC6A
CLA04-SC6A-CMR
CLA04-SC6A-LSZH
CLA04-SFC6A
CLA04-UC6A
CLA04-UC6A-CMR
CLA04-UC6A-LSZH
Description
Cat 6A FTP solid cable
Cat 6A FTP solid cable
Cat 6A FTP solid cable
Cat 6A SFTP solid cable
Cat 6A UTP solid cable
Cat 6A UTP solid cable
Cat 6A UTP solid cable
Carton
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
23AWG
23AWG
23AWG
23AWG
23AWG
23AWG
23AWG
Standard color
RAL7035
RAL7035
RAL7035
RAL7035
RAL7035
RAL7035
RAL7035
Packing Type
Reel
Reel
Reel
Reel
Reel
Reel
Reel
Carton measurement
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Carton weight
19.70KG
19.70KG
18.90KG
23.85KG
16.30KG
16.30KG
16.00KG
CLA04-UC6A
Cat 6A UTP solid cable Cat 6A UTP solid cable RAL 7035 RAL 7035
CLA04-UC6A-LSZH CLA04-UC6A-CMR
. 6 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
CAT 6A KEYSTONE JACKS P/N: JKG06-SC6A
The new style Jack provides Category 6A system performance and user-friendly installation features. A shielded is available to maximum protection from EMI/RFI interference, the compact size provides high-density connectivity in the work area and telecommunications room.
DESCRIPTION
Available in Cat6A, T568A/B wiring, meet or exceed TIA/EIA Cat6A requirementsShielding protects against EMI/RFI interferenceHousing : high temperature thermoplasticCompact jack design,8 positions and 8 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ"gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
PRODUCT FIGURE
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
1500 matching recycles .
Allow RJ45 plugs to provide high-density solutions .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Category 6A component and channel requirement of T568A and T568B.
The new design allows high density solutions .
P/N: JKG06-SC6A
10 G
Termination caps prevent wire from dropping off .
14.5mm
33.2
mm
16.3mm
20.9
mm
33.2mm
16.1mm
. 7 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6A KEYSTONE JACKS
INSTALLMENT INSTRUCTIONS
ORDER INFORMATION
A B C D E
Strip approxialately 4 cm of the cable jacket. Cut the pair separator and rip cord (if present) as close as possible to the jacket. Note: Be careful not to nick conductors.
Insert each wire into the appropriate channel according to the color code on the module.
Press the front part of shield case into the module tightly using Linkbasic tool (P/N: TLA02).
Finish the installment.
JKG06-SC6A
JKA09-UC6A
Part number
JKG06-SC6A
JKA09-UC6A
Description
Cat6A shielded keystone jacks (180 degree)
Cat6A unshielded keystone jacks (180 degree)
Inner box
20PCS
25PCS
standard color
Silver
White
Carton
200PCS
250PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
9.20KG
3.80KG
Cat6A shielded keystone jacks (180 degree)
Cat6A unshielded keystone jacks (180 degree)
. 8 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
CAT 6A 24-PORT PATCH PANEL P/N: PNA24-SC6A PNA24-UC6A
P/N: PNA24-SC6A
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Front surface is uninterrupted by screw heads for a clean appearance .
The shielded patch panels are loaded with shielded keystone jacks , which are housed in a closure full shielding metal enclosure designed to meet highest industry requirement.A shielded version is also available to maximum protection from EMI/RFI interference. By utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions.
DESCRIPTION
Design to mount to any standard 19" rack or cabinet 24 -port Cat 6A shielded Patch panel Space saving, high-density 1U Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568B.2Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemesSturdy Aluminum Plate around RJ 45 Jacks Phosphor bronze with 6-50 micro inches gold plated Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 6A standard Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires Metal sheet: Corrosion resistant steelPlastic: fire self -extinguish high impact plastic
FEATURES AND BENEFITS
10 G
PRODUCT FIGURE
8.3mm
18mm
3.2mm
41.3mm
44.2mm
84.2mm
32mm
9.5mm7mm
465mm482.5mm
16.6mm 25mm
1 9 172 10 1811 1912 2013 2114 2215 2316 243 4 5 6 7 8
. 9 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6A 24-PORT PATCH PANEL
INSTALLMENT INSTRUCTIONS
A B C
The bracket of Cat 6A patch panel. Position the shielded keystone jack for installation. Insert the jack into the mounting location properly.
PNG24-SC6A
Cat 6A FTP 24-port patch panel
PNA24-KJ
Empty panel
ORDER INFORMATION
Part number
PNG24-SC6A
PNA24-UC6A
PNA24-KJ
Description
24-port Cat6A shielded patch panels (jack style )(JKG06-SC6A)
24-port Cat6 unshielded patch panels (jack style) (JKA09-UC6A)
Empty panel
Inner box
1PC
1PC
1PC
Carton
10PCS
10PCS
10PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
17.00KG
10.00KG
7.80KG
standard color
Black
Black
Black
PNA24-SC6A
Cat 6A UTP 24-port patch panel
. 10 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
CAT 6A PATCH CABLES P/N: CAA01-SC6A-*-# CAA01-UC6A-*-#
10 G
Perfect for use with Gigabit Ethernet , they comes complete RJ45 male to male Connectors and snagless molded strain relief, the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
DESCRIPTION
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectorsFitted with strain relief bootsWith or without reports made to the order 100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6A requirement They are available in a variety of the lengths
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
FEATURES AND BENEFITS
P/N: CAA01-SC6A-*-# P/N: CAA01-UC6A-*-#
ORDER INFORMATION
Part number
CAA01-SC6A-*-#
CAA01-SC6A-LSZH-*-#
CAA01-SC6A-CMR-*-#
CAA01-UC6A-*-#
CAA01-UC6A-LSZH-*-#
CAA01-UC6A-CMR-*-#
Description
Cat 6A FTP Patch Cable
Cat 6A FTP Patch Cable
Cat 6A FTP Patch Cable
Cat 6A UTP Patch Cable
Cat 6A UTP Patch Cable
Cat 6A UTP Patch Cable
Inner box
1PC
1PC
1PC
1PC
1PC
1PC
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
Cat 6A FTP Patch Cable
Cat 6A FTP Patch Cable
Cat 6A UTP Patch Cable
Cat 6A UTP Patch Cable
. 11 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6 FTP SYSTEM PRODUCTS
4 TWISTED PAIR FTP CAT 6 CABLE 12-13
14-15
16-17
18
CAT 6 FTP KEYSTONE JACK
CAT 6 FTP PATCH PANEL
CAT 6 FTP PATCH CABLE
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: CLA04-SC6
P/N: PNG24-SC6
P/N: JKG06-SC6
P/N: CAA01-SC6-*-#
18CAT 6 FTP MODULAR PLUGS
. 12 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 6 FTP SOLID CABLE P/N: CLA04-SC6
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B,2-1& ISO/IEC 11801, IEC 61163Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPaclaging: Reel,Reel in Box
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN1000Base-T1000Base-TX155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
FTP4 Pair23AWG0.575Solid Bare Copper
HDPE1.151.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnYesNoYes (AL Foil)Yes (Tinned Copper)PVC or LSZHBased On Customer Requirements 7.2 ± 0.3
MECHANICAL CHARACTERISTICS
Operating Temp. RangeMax. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~70°C110N
8 x O.D.CMR
ELECTRICAL CHARACTERISTICS
Max. Matual Capacitance @ kHzMax. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMni. Insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF/100M≤330pF /100M(Per TIA/EIA-568B.2)≤160pF /100M(Per IEC 61156)65%
≤45ns/100M7.32Ω /100M (23AWG)
≤5%(per TIA/EIA-568B.2)≤2%(per IEC 61156-5)5000
300V
P/N: CLA04-SC6
P/N: CLA04-SC6
P/N: CLA04M-SC6
Insulation
Polyester Tape
Filler
AL foil
Drain Wire
Outer Jacket
ConductorCross section
Conductor
Drain WireFiller
Insulation
AL foil
Outer Jacket
Polyester Tape
Insulation
Polyester Tape
Filler
AL foil
Drain Wire
Outer Jacket
ConductorCross section
. 13 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 6 FTP SOLID CABLE
Cat 6 FTP solid cable
Cat 6 FTP solid cable Cat 6 FTP solid cable
Cat 6 FTP Stranded Cable
Cat 6 FTP solid cable
RAL 7035
RAL 7035 RAL 7035RAL 7035
RAL 7035
CLA04-SC6
CLA04-SC6-LSZH CLA04-SC6-CMR
CLA04M-SC6
CLA04-SFC6
TIA/EIA 568-B.2 ELECTRICAL CHARACTERISTICS
Frequency(MHz)0.7721481016202531.2562.5100200250
Input Impedance(Ohms)100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±22100±22
ATT(DB/100m)1.82.03.85.36.07.68.59.510.715.419.829.032.8
RL(Db)-20.023.024.525.025.025.024.323.621.520.118.017.3
NEXT(Db)76.074.365.360.859.356.254.853.351.947.444.339.838.3
PSNEXT(Db)74.072.363.358.857.354.252.851.349.945.442.337.836.3
ELFEXT(Db/100m)-67.855.849.747.843.741.839.837.931.927.821.819.8
PSELFEXT(Db/100m)-64.852.846.744.840.738.836.834.928.924.818.816.8
PD(Ns/100m)-570.0552.0546.7545.4543.0542.0541.2540.4538.6537.6536.5536.3
ORDER INFORMATION
Part number
CLA04-SC6
CLA04-SC6-CMR
CLA04-SC6-LSZH
CLA04-SFC6
CLA04M-SC6
Description
Cat 6 FTP Solid Cable
Cat 6 FTP Solid Cable
Cat 6 FTP Solid Cable
Cat 6 SFTP Solid Cable
Cat 6 FTP Stranded Cable
Carton
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
23AWG
23AWG
23AWG
23AWG
24AWG
Standard color
RAL7035
RAL7035
RAL7035
RAL7035
RAL7035
packing Type
Reel
Reel
Reel
Reel
Reel
Carton measurement
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Φ38cm × H27.5cm
Carton weight
18.30KG
18.30KG
17.50KG
22.10KG
16.20KG
. 14 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 6 FTP KEYSTONE JACKS P/N: JKG06-SC6
The new style Jack provides Category 6 system performance and user-friendly installation features. A shielded is available to maximum protection from EMI/RFI interference, the compact size provides high-density connectivity in the work area and telecommunications room.
DESCRIPTION
Available in Cat6, T568A/B wiring, meet or exceed TIA/EIA Cat6 requirementsShielding protects against EMI/RFI interferenceHousing : high temperature thermoplasticCompact jack design,8 positions and 8 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ"gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
PRODUCT FIGURE
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
1500 matching recycles .
Allow RJ45 plugs to provide high-density solutions .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Category 6 component and channel requirement of T568A and T568B.
The new design allows high density solutions .
P/N: JKG06-SC6
Termination caps prevent wire from dropping off .
14.5mm
33.2
mm
16.3mm
20.9
mm
33.2mm
16.1mm
. 15 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 6 FTP KEYSTONE JACKS
INSTALLMENT INSTRUCTIONS
ORDER INFORMATION
JKG06-SC6
JKB06-SC6
Part number
JKG06-SC6
JKB06-SC6
Description
Cat6 shielded keystone jacks (180 degree)
Cat6 shielded keystone jacks (90 degree)
Cat 6 FTP Keystone Jack(180°)
Cat 6 FTP Keystone Jack (90°)
Inner box
20PCS
20PCS
Carton
200PCS
200PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
9.20KG
5.60KG
standard color
Silver
Silver
A B C D E
Strip approxialately 4 cm of the cable jacket. Cut the pair separator and rip cord (if present) as close as possible to the jacket. Note: Be careful not to nick conductors.
Insert each wire into the appropriate channel according to the color code on the module.
Cut the suplus wires. Finish the installment.
. 16 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
P/N: PNG24-SC6
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Front surface is uninterrupted by screw heads for a clean appearance .
The shielded patch panels are loaded with shielded keystone jacks , which are housed in a closure full shielding metal enclosure designed to meet highest industry requirement.A shielded version is also available to maximum protection from EMI/RFI interference. By utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions.
DESCRIPTION
Design to mount to any standard 19" rack or cabinet 24 -port Cat 6 shielded Patch panel Space saving, high-density 1U Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568B.2Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemesSturdy Aluminum Plate around RJ 45 Jacks Phosphor bronze with 6-50 micro inches gold plated Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 6 standard Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires Metal sheet: Corrosion resistant steelPlastic: fire self -extinguish high impact plastic
FEATURES AND BENEFITS
PRODUCT FIGURE
8.3mm
18mm
3.2mm
41.3mm
44.2mm
84.2mm
32mm
9.5mm7mm
465mm482.5mm
16.6mm 25mm
CAT 6
1 9 172 10 1811 1912 2013 2114 2215 2316 243 4 5 6 7 8
. 17 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
INSTALLMENT INSTRUCTIONS
A B C
The bracket of Cat 6 patch panel. Position the shielded keystone jack for installation. Insert the jack into the mounting location properly.
ORDER INFORMATION
Part number
PNG24-SC6
PNS24-SC6
PNS24-SC6-0.5
PNA24-KJ
Description
24-port Cat6 shielded patch panels (jack style )(JKG06-SC6)
24-port Cat6 unshielded patch panels (IDC style)
0.5U 24-port Cat5e unshielded patch panels (IDC style)
Empty panel
Inner box
1PC
1PC
1PC
1PC
Carton
10PCS
5PCS
5PCS
10PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
17.00KG
10.00KG
8.60KG
7.80KG
standard color
Black
Black
Black
Black
PNG24-SC6
Cat 6 FTP 24-port patch panel
Cat 6 FTP 24-port patch panel Cat 6 FTP 0.5U 24-port patch panel
PNS24-SC6 PNS24-SC6-0.5
PNA24-KJ
Empty panel
. 18 .
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Perfect for use with Gigabit Ethernet , they comes complete RJ45 male to male Connectors and snagless molded strain relief, the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
Boots offer cable-end color ID, strain relief and RJ45 plug tab protection from snagging on cables or connectors when routing in ceilings and under floors, Suitable for Indoor Installations.
DESCRIPTION
DESCRIPTION
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectorsFitted with strain relief bootsWith or without reports made to the order 100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6 requirement They are available in a variety of the lengths
6-50 micron RJ-45 staggered gold plated connectors Fitted with strain relief bootsWith or without reports made to the order100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6 requirementThey are available in a variety of the lengths
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
FEATURES AND BENEFITS
FEATURES AND BENEFITS
P/N: CAA01-SC6-*-#
ORDER INFORMATION
Description
Cat 6 FTP Patch Cable
Cat 6 FTP Patch Cable
Cat 6 FTP Patch Cable
Cat 6 FTP Modular plugs
Inner box
1PC
1PC
1PC
500PCS
Carton
---
---
---
5000PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
CAT 6A UTP MODULAR PLUGS P/N: RJB01-SC6
Part number
CAA01-SC6-*-#
CAA01-SC6-LSZH-*-#
CAA01-SC6-CMR-*-#
RJB01-SC6
P/N: RJB01-SC6
CAT 6 FTP PATCH CABLES P/N: CAA01-SC6-*-#
. 19 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 6 UTP SYSTEM PRODUCTS
4 TWISTED PAIR UTP CAT 6 CABLE 20-21
22-23
24-25
26
26
CAT 6 UTP KEYSTONE JACK
CAT 6 UTP PATCH PANEL
CAT 6 UTP PATCH CABLE
CAT 6 UTP MODULAR PLUGS
P/N: CLA04-UC6
P/N: PNA24-UC6
P/N: JKA09-UC6
P/N: CAA01-UC6-*-#
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
. 20 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 6 UTP SOLID CABLE P/N: CLA04-UC6
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B.2-10& ISO/IEC 11801, IEC 61156Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel,Reel in Box
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN1000Base-T1000Base-TX155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
UTP4 Pair23AWG0.565Solid Bare Copper
HDPE1.021.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnYesNoNoNoPVC or LSZHBased On Customer Requirements 23AWG UTP nom:6.2mm
MECHANICAL CHARACTERISTICS
Operating Temp. RangeMax. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~70℃110N
8 x O.D.CMR
ELECTRICAL CHARACTERISTICS
MAX. Matual Capacitance @ kHzMAX. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMni. Insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF/100M≤330pF /100M(Per TIA/EIA-568B.2)≤160pF /100M(Per IEC 61156)65%
≤45ns/100M7.32Ω /100M (23AWG)
≤5%(per TIA/EIA-568B.2)≤2%(per IEC 61156-5)5000
300V
P/N: CLA04-UC6
Conductor Filler
Rip cord (optional)
Insulation
Outer Jacket
AL foil
Insulation
Filler
Rip cord (optional) Outer Jacket
ConductorCross section
CATEGORY 6 UTP CABLEPART NUMBER: CLA04-UC6QUANTITY: 1PCSDATE CODE: 0818LENGTH: 1000FT(305M)
Insulation
Filler
Rip cord (optional) Outer Jacket
ConductorCross section
Polyester Tape
Polyester Tape
P/N: CLA04-UC6
P/N: CLA04M-UC6
. 21 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 6 UTP SOLID CABLE
Cat 6 UTP solid cable
Cat 6 UTP solid cable Cat 6 UTP solid cable
Cat 6 UTP Stranded CableRAL 7035
RAL 7035 RAL 7035
RAL 7035
CLA04-UC6
CLA04-UC6-CMR
CLA04M-UC6
CLA04-UC6-LSZH
TIA/EIA 568-B.2 ELECTRICAL CHARACTERISTICS
ORDER INFORMATION
Part number
CLA04-UC6
CLA04-UC6-CMR
CLA04-UC6-LSZH
CLA04M-UC6
Description
Cat 6 UTP Solid Cable
Cat 6 UTP Solid Cable
Cat 6 UTP Solid Cable
Cat 6 UTP Stranded Cable
Carton
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
23AWG
23AWG
23AWG
24AWG
Standard color
RAL7035
RAL7035
RAL7035
RAL7035
packing Type
Box
Box
Box
Box
Carton measurement
L36.5cm× W25.5cm × H37cm
L36.5cm× W25.5cm × H37cm
L36.5cm× W25.5cm × H37cm
L36.5cm× W25.5cm × H37cm
Carton weight
14.10KG
14.10KG
13.90KG
11.10KG
Frequency(MHz)0.7721481016202531.2562.5100200250
Input Impedance(Ohms)100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±22100±22
ATT(DB/100m)1.82.03.85.36.07.68.59.510.715.419.829.032.8
RL(Db)-20.023.024.525.025.025.024.323.621.520.118.017.3
NEXT(Db)76.074.365.360.859.356.254.853.351.947.444.339.838.3
PSNEXT(Db)74.072.363.358.857.354.252.851.349.945.442.337.836.3
ELFEXT(Db/100m)-67.855.849.747.843.741.839.837.931.927.821.819.8
PSELFEXT(Db/100m)-64.852.846.744.840.738.836.834.928.924.818.816.8
PD(Ns/100m)-570.0552.0546.7545.4543.0542.0541.2540.4538.6537.6536.5536.3
. 22 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
P/N: JKA09-UC6
1500 matching recycles .
Allow RJ45 plugs to provide high-density solutions .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Category 6 component and channel requirement of T568A and T568B.
The new design allows high density solutions .
PRODUCT FIGURE
This series keystone jacks work together with high speed cables, cords and panels to provide performance beyond proposed Category 6 standards, a new feature of this series jack is a universal colored wiring label that eliminates the need for separate codes for T568A/B wiring scheme.
DESCRIPTION
Available in Cat6, T568A/B wiring, meet or exceed TIA/EIA Cat6 requirementsHousing : high temperature thermoplasticCompact jack design, 8 positions and 8 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ" gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
CAT 6 UTP KEYSTONE JACKS P/N: JKA09-UC6
Termination caps prevent wire from dropping off .
14.5mm16.0mm
16.1mm
8.0m
m9.
8mm
32.0
mm
20.7mm
19.7mm
6.5
4.5
. 23 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
INSTALLMENT INSTRUCTIONS
A B C F
G H
View the color on the module to determine proper location of the conductors based upon preferred wiring scheme.
Fan out cables based on desired wiring scheme, cut the pair separator and rip cord(if present) as close as possible to the jacket. Note: Be careful not to nick conductors.
Insert each wire into the appropriate channel according to the color code on the module, keep the cable perpendicular to the block.
Terminate wires using Linkbasic tool (P/N: TLA11) or equivalent.
Install dust caps by snapping into place as shown. Note: The cable jacket should remain outside the dust caps as shown.
Install dust caps by snapping into place as shown.
ORDER INFORMATION
Part number
JKA09-UC6
JKB06-UC6
JKE11-UC6
Description
Cat6 unshielded keystone jacks (180 degree)
Cat6 unshielded keystone jacks (90 degree)
Cat6 unshielded through coupler
Inner box
25PCS
25PCS
25PCS
Standard Color
Black
White
Beige
Carton
250PCS
250PCS
250PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
3.80KG
4.20KG
3.50KG
CAT 6 UTP KEYSTONE JACKS
JKA09-UC6
JKB06-UC6 JKE11-UC6
Cat 6 UTP Keystone Jack (180°C)
Cat 6 UTP Keystone Jack (90°C) Cat 6 UTP Through coupler
. 24 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 6 UTP 24-PORT PATCH PANEL P/N: PNA24-UC6
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Front surface is uninterrupted by screw heads for a clean appearance .
P/N: PNA24-UC6
PRODUCT FIGURE
The shielded patch panels are loaded with shielded keystone jacks , which are housed in a closure full shielding metal enclosure designed to meet highest industry requirement.A shielded version is also available to maximum protection from EMI/RFI interference. By utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions.
DESCRIPTION
Design to mount to any standard 19" rack or cabinet 24 -port Cat 6 shielded Patch panel Space saving, high-density 1U Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568B.2Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemesSturdy Aluminum Plate around RJ 45 Jacks Phosphor bronze with 6-50 micro inches gold plated Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 6 standard Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires Metal sheet: Corrosion resistant steelPlastic: fire self -extinguish high impact plastic
FEATURES AND BENEFITS
8.3mm
18mm
3.2mm
41.3mm
44.2mm
84.2mm
32mm
9.5mm7mm
465mm482.5mm
16.6mm 25mm
1 9 172 10 1811 1912 2013 2114 2215 2316 243 4 5 6 7 8
CAT 6
. 25 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 6 UTP 24-PORT PATCH PANEL
INSTALLMENT INSTRUCTIONS
A B C
The bracket of Cat 6 patch panel. Position the shielded keystone jack for installation. Insert the jack into the mounting location properly.
PNA24-UC6
PNA24-KJ
Cat 6 UTP 24-port patch panel
Cat 6 UTP 24-port patch panel Cat 6 UTP 24-port patch panel
Empty panel
ORDER INFORMATION
Part number
PNA24-UC6
PND24-UC6
PNS24-UC6
PNA24-KJ
Description
24-port Cat6 unshielded patch panels (jack style) (JKA09-UC6)
24-port Cat6 unshielded patch panels (IDC style)
24-port Cat6 unshielded patch panels (IDC style)
Empty panel
Inner box
1PC
1PC
1PC
1PC
Carton
10PCS
10PCS
5PCS
10PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
10.00KG
8.20KG
8.60KG
7.80KG
PNS24-UC6 PND24-UC6
Standard Color
Black
Black
Black
Black
. 26 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Perfect for use with Gigabit Ethernet , they comes complete RJ45 male to male Connectors and snagless molded strain relief, the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
DESCRIPTION
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectorsFitted with strain relief bootsWith or without reports made to the order 100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6A requirement They are available in a variety of the lengths
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
FEATURES AND BENEFITS
P/N: CAA01-UC6-*-#
CAT 6 UTP 24-PORT PATCH PANEL P/N: CAA01-UC6-*-#
Boots offer cable-end color ID, strain relief and RJ45 plug tab protection from snagging on cables or connectors when routing in ceilings and under floors, Suitable for Indoor Installations.
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectors Fitted with strain relief bootsWith or without reports made to the order100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6 requirementThey are available in a variety of the lengths
FEATURES AND BENEFITS
ORDER INFORMATION
Description
Cat 6 UTP Patch Cable
Cat 6 UTP Patch Cable
Cat 6 UTP Patch Cable
Cat 6 UTP Modular plugs
Inner box
1PC
1PC
1PC
500PCS
Carton
---
---
---
5000PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
CAT 6 UTP MODULAR PLUGS P/N: RJB01-UC6
Part number
CAA01-UC6-*-#
CAA01-UC6-LSZH-*-#
CAA01-UC6-CMR-*-#
RJB01-UC6
P/N: RJB01-UC6
. 27 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 5E FTP SYSTEM PRODUCTS
4 TWISTED PAIR FTP CAT 5E CABLE 28-29
30-31
32-33
34
34
CAT 5E FTP KEYSTONE JACK
CAT 5E FTP PATCH PANEL
CAT 5E FTP PATCH CABLE
CAT 5E FTP MODULAR PLUGS
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: CLA04-SC5E
P/N: PNS24-SC5E
P/N: JKG06-SC5E
P/N: CAA01-SC5E-*-#
. 28 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 5E FTP SOLID CABLE P/N: CLA04-SC5E
Insulation
Insulation
Polyester Tape
Polyester Tape
AL foil
AL foil
Drain Wire
Drain Wire
Outer Jacket
Outer Jacket
Cross section
Cross section
Conductor
Drain Wire
Insulation
AL foil
Outer Jacket
Polyester Tape
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B,2-1& ISO/IEC 11801, IEC 61161Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel,Reel in Box
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN1000Base-T1000Base-TX155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
FTP4 Pair24AWG0.515Solid Bare Copper
HDPE1.031.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnNoNoYes (AL Foil)Yes (Tinned Copper)PVC or LSZHPer customer request6.2 ± 0.3
MECHANICAL CHARACTERISTICS
Operating Temp. RangeMax. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~70°C110N
8 x O.D.CMR
ELECTRICAL CHARACTERISTICS
Max. Matual Capacitance @ kHzMax. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMin. Insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF/100M≤330pF /100M(Per TIA/EIA-568B.2)≤160pF /100M(Per IEC 61156)65%
≤45ns/100M9.38Ω /100M (24AWG)
≤5%(per TIA/EIA-568B.2)≤2%(per IEC 61156-5)5000
300V
1
1
2
2
3
3
4
4
Conductor
Conductor
P/N: CLA04-SC5E
P/N: CLA04-SC5E
P/N: CLA04M-SC5E
. 29 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 5E FTP SOLID CABLE
Cat 5E FTP solid cable
Cat 5E FTP solid cable Cat 5E FTP solid cable Cat 5E FTP solid cable
RAL 7035
RAL 7035 RAL 7035RAL 7035
CLA04-SC5E
CLA04-SC5E-LSZH CLA04-SC5E-CMR CLA04-SFC5E
TIA/EIA 568-B.2 ELECTRICAL CHARACTERISTICS
Frequency(MHz)0.7721481016202531.2562.5100
Input Impedance(Ohms)100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15
ATT(DB/100m)1.82.04.15.86.58.29.310.411.717.022.0
RL(Db)-20.023.024.525.025.025.024.323.621.520.1
NEXT(Db)67.065.356.351.850.347.245.844.342.938.435.3
PSNEXT(Db)64.062.353.348.847.344.242.841.339.935.432.3
ELFEXT(Db/100m)-63.851.845.742.839.737.835.833.927.923.8
PSELFEXT(Db/100m)-60.848.842.740.836.734.832.830.924.920.8
PD(Ns/100m)-570.0552.0546.7545.4543.0542.0541.2540.4538.6537.6
ORDER INFORMATION
Part number
CLA04-SC5E
CLA04-SC5E-CMR
CLA04-SC5E-LSZH
CLA04-SFC5E
CLA04M-SC5E
Description
Cat 5e FTP Solid Cable
Cat 5e FTP Solid Cable
Cat 5eFTP Solid Cable
Cat 5e SFTP Solid Cable
Cat 5e FTP Stranded Cable
Carton
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
24AWG
24AWG
24AWG
24AWG
24AWG
Standard color
RAL7035
RAL7035
RAL7035
RAL7035
RAL7035
packing Type
Reel
Reel
Reel
Reel
Reel
Carton measurement
Φ32cm × H27.5cm
Φ32cm × H27.5cm
Φ32cm × H27.5cm
Φ38cm × H27.5cm
Φ32cm × H27.5cm
Carton weight
12.80KG
12.80KG
12.40KG
19.90KG
12.20KG
. 30 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 5E FTP KEYSTONE JACKS P/N: JKG06-SC5E
The new style Jack provides Category 5E system performance and user-friendly installation features. A shielded is available to maximum protection from EMI/RFI interference, the compact size provides high-density connectivity in the work area and telecommunications room.
DESCRIPTION
Available in Cat5E, T568A/B wiring, meet or exceed TIA/EIA Cat5e requirementsShielding protects against EMI/RFI interferenceHousing : high temperature thermoplasticCompact jack design,8 positions and 8 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ"gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
PRODUCT FIGURE
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
1500 matching recycles .
Allow RJ45 plugs to provide high-density solutions .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Category 6 component and channel requirement of T568A and T568B.
The new design allows high density solutions .
P/N: JKG06-SC5E
Termination caps prevent wire from dropping off .
14.5mm
33.2
mm
33.2mm
16.1mm
16.3mm
20.9
mm
. 31 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 5E FTP KEYSTONE JACKS
INSTALLMENT INSTRUCTIONS
ORDER INFORMATION
JKB06-SC5E
Cat 5E FTP Keystone Jack (90°)
Part number
JKG06-SC5E
JKB06-SC5E
Description
Cat5e shielded keystone jacks (180 degree)
Cat5e shielded keystone jacks (90 degree)
Inner box
20PCS
20PCS
Carton
200PCS
200PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
9.20KG
5.60KG
Standard color
Silver
Silver
JKG06-SC5E
Cat 5E FTP Keystone Jack(180°)
A B C D E
Strip approxialately 4 cm of the cable jacket.
Cut the pair separator and rip cord (if present) as close as possible to the jacket. Note: Be careful not to nick conductors.
Insert each wire into the appropriate channel according to the color code on the module.
Press the front part of shield case into the module tightly using Linkbasic tool (P/N: TLA02).
Finish the installment.
. 32 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 5E FTP 24-PORT PATCH PANEL P/N: PNS24-SC5E
P/N: PNS24-SC5E
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Fit for the 110 punch down tools.
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Front surface is uninterrupted by screw heads for a clean appearance .
PRODUCT FIGURE
The shielded patch panels are loaded with shielded keystone jacks , which are housed in a closure full shielding metal enclosure designed to meet highest industry requirement.A shielded version is also available to maximum protection from EMI/RFI interference. By utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions.
DESCRIPTION
Design to mount to any standard 19" rack or cabinet 24 -port Cat 5E shielded Patch panel Space saving, high-density 1U Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568B.2Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemesSturdy Aluminum Plate around RJ 45 Jacks Phosphor bronze with 6-50 micro inches gold plated Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 5E standard Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires Metal sheet: Corrosion resistant steelPlastic: fire self -extinguish high impact plastic
FEATURES AND BENEFITS
108.8mm
440mm
12 3 45 6 7 89 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
32mm
482.5mm
16mm
6.2mm109.2mm
44mm
11.5mm465mm
. 33 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 5E FTP 24-PORT PATCH PANEL
INSTALLMENT INSTRUCTIONS
A B C
Insert each wire into the appropriate channel. Terminate wires using Linkbasic tool (P/N: TLA01) or equivalent.
Check and ensure each wire in correct slot. Insert the jack into the correct mounting location properly.
Cat 5E FTP 24-port patch panel
PNS24-SC5E
Cat 5E FTP 24-port patch panel
PNG24-SC5E
PNA24-KJ
Empty panel
ORDER INFORMATION
Part number
PNS24-SC5E
PNG24-SC5E
PNA24-KJ
Description
24-port Cat5e shielded patch panels (IDC style)
24-port Cat5e shielded patch panels (jack style )(JKG06-SC5E)
Empty panel
Inner box
1PC
1PC
1PC
Carton
5PCS
10PCS
10PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
10.00KG
17.00KG
7.80KG
standard color
Black
Black
Black
. 34 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Linkbaic’s patch cable enable you to connect all hardware destinations on a local area network , Perfect for use with 10/100 base –T networks , they comes complete RJ45 male to male Connectors and snagless molded strain relief ,the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
We offer modular plugs in standard configuration terminate modular cords for patching or work area application , modular plugs can be terminated to the exact cable length in order to maintain a nearer , more organized installment , the plugs terminate twist pair cable with 26-22 AWG solid all plugs contracts have 50 micron inches of gold plating over nickel.
DESCRIPTION
DESCRIPTION
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectors Fitted with strain relief boots With or without reports made to the order 100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talkExceed Category 5E requirementThey are available in a variety of the lengths
Clear colorMeet or exceed the requirement in the Cat 5e T568 A and T568 B (Telecommunication requirement) Contacts are nickel plated, phosphor bronze with 6 to 50u" gold plate Meets EIA/TIA 568 Cat 5E (Cat 3) specification Contact blade : phosphor bronzeExclusive stagger conductors guide design reduces near end cross talk
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
FEATURES AND BENEFITS
FEATURES AND BENEFITS
P/N: CAA01-SC5E-*-#
P/N: RJB01-SC5E
ORDER INFORMATION
Description
Cat 5E FTP Patch Cable
Cat 5E FTP Patch Cable
Cat 5E FTP Patch Cable
Cat 5E FTP Modular plugs
Inner box
1PC
1PC
1PC
500PCS
Carton
---
---
---
5000PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
10.5KG
6.5KG
6.5KG
12.5KG
CAT 5E FTP PATCH CABLE P/N: CAA01-SC5E-*-#
CAT 5E UTP MODULAR PLUGS P/N: RJB01-SC5E
Part number
CAA01-SC5E-*-#
CAA01-SC5E-LSZH-*-#
CAA01-SC5E-CMR-*-#
RJB01-SC5E
. 35 .
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
www.linkbasic.com
CAT 5E UTP SYSTEM PRODUCTS
4 TWISTED PAIR FTP CAT 5E CABLE 36-37
38-39
40-41
42
42
CAT 5E FTP KEYSTONE JACK
CAT 5E FTP PATCH PANEL
CAT 5E FTP PATCH CABLE
CAT 5E FTP MODULAR PLUGS
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: CLA04-UC5E
P/N: PND24-UC5E
P/N: JKB06-UC5E
P/N: CAA01-UC5E-*-#
. 36 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Conductor
Insulation
Outer Jacket
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B.2-10& ISO/IEC 11801Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel,Reel in Box
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
U/UTP4 Pair24AWG0.50(24AWG)Solid Bare Copper
HDPE0.881.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnNoNoNoNoPVC or LSZHBased On Customer Requirements24AWG UTP nom:4.8mm
MECHANICAL CHARACTERISTICS
Operating Temp. RangeMax. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~70℃110N
4 x O.D.CMR
ELECTRICAL CHARACTERISTICS
Max. Matual Capacitance @ kHzMax. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMin. insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF/100M≤330pF /100M(Per TIA/EIA-568B.2)≤160pF /100M(Per IEC 61156)65%
≤45ns/100M9.38Ω /100M (23AWG)
≤5%(per TIA/EIA-568B.2)≤2%(per IEC 61156-5)5000
300V
P/N: CLA04-UC5E
P/N: CLA04-UC5E
P/N: CLA04M-UC5E
CAT 5E UTP SOLID CABLE P/N: CLA04-UC5E
Insulation
Insulation
Rip cord (optional)
Rip cord (optional)
Outer Jacket
Outer Jacket
Cross section
Cross section
1
1
2
2
3
3
4
4
Conductor
Conductor
Rip cord (optional)
CATEGORY 5E UTP CABLEPART NUMBER: CLA04-UC5EQUANTITY: 1PCSDATE CODE: 0917LENGTH: 1000FT(305M)
. 37 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
Cat 5E UTP solid cable
Cat 5E Outdoor UTP Solid Cable Cat 5E UTP solid cable(LSZH) Cat 5E UTP solid cable(CMR)
Cat 5E UTP Stranded Cable
RAL 7004
RAL 9005 RAL 7035 RAL 7004
RAL 7004
CLA04-UC5E
CLB04-UC5E CLA04-UC5E-CMR
CLA04M-UC5E
CLA04-UC5E-LSZH
TIA/EIA 568-B.2 ELECTRICAL CHARACTERISTICS
ORDER INFORMATION
CAT 5E UTP SOLID CABLE
Frequency(MHz)0.7721481016202531.2562.5100
Input Impedance(Ohms)100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15100±15
ATT(DB/100m)1.82.04.15.86.58.29.310.411.717.022.0
RL(Db)19.420.023.024.525.025.025.024.323.621.520.1
NEXT(Db)67.065.356.351.850.347.245.844.342.938.435.3
PSNEXT(Db)64.062.353.348.847.344.242.841.339.935.432.3
ELFEXT(Db/100m)66.063.851.745.743.839.737.735.833.927.823.8
PSELFEXT(Db/100m)63.060.848.842.740.836.734.732.830.924.820.8
PD(Ns/100m)575570552547545543542541540539538
SKEW(Ns/100m)4545454545454545454545
Hybrid PSNext(db Min)65.065.059.354.853.350.248.847.345.941.438.3
Part number
CLA04-UC5E
CLA04-UC5E-CMR
CLA04-UC5E-LSZH
CLB04-UC5E
CLA04M-UC5E
Description
Cat 5e UTP Solid Cable
Cat 5e UTP Solid Cable
Cat 5e UTP Solid Cable
Cat 5e Outdoor UTP Solid Cable
Cat 5e UTP Stranded Cable
Carton
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
24AWG
24AWG
24AWG
24AWG
24AWG
Standard color
RAL7004
RAL7004
RAL7035
RAL9005
RAL7004
packing Type
Box
Box
Box
Box
Box
Carton measurement
L35.5cm× W32.5cm × H35.5cm
L35.5cm× W32.5cm × H35.5cm
L35.5cm× W32.5cm × H35.5cm
L35.5cm× W32.5cm × H35.5cm
L35.5cm× W32.5cm × H35.5cm
Carton weight
9.40KG
9.40KG
9.10KG
9.60KG
9.10KG
. 38 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
P/N: JKB06-UC5E
1500 matching recycles .
Allow RJ45 plugs to provide high-density solutions .Termination caps prevent wire from dropping off .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Category 5E component and channel requirement of T568A and T568B.
The new design allows high density solutions .
PRODUCT FIGURE
Horizontal style Cat5E 90 degree keystone jacks, it features dual color-coded wiring label with both T568A/B wiring pattern. Rear termination field for easy termination of a jack while installed in a wall plate, surface mount boxes, and blank patch panels for a wide variety of Applications.
DESCRIPTION
Available in Cat 5E, T568A/B wiring schemes, meet or exceed TIA/EIA Cat5E requirementsHousing : high temperature thermoplasticCompact jack design,8 positions and 8 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ" gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, extremely low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
INSTALLMENT INSTRUCTIONS
A B C F G
Strip back cable jacket using Linkbaisc tool (P/N: TLD01) or equivalent.
View the color on the module to determine proper location of the conductors based upon preferred wiring scheme.
Insert each wire into the appropriate channel according to the color code on the modular's both sides.
Terminate wires using Linkbasic tool (P/N: TLA01) or equivalent.
Install dust caps by snapping into place as shown.
CAT 5E UTP KEYSTONE JACKS P/N: JKB06-UC5E
12mm4mm
20mm
20.8mm
31mm
14.5mm
19.9mm
7.9mm
16.1mm17.6mm
7.9mm1.8mm
. 39 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
ORDER INFORMATION
Part number
JKA09-UC5E
JKB06-UC5E
JKE01-UC5E
JKE02-UC5E
JKE11-UC5E
Description
Cat5e unshielded keystone jacks (180 degree)
Cat5e unshielded keystone jacks (90 degree)
Cat5e unshielded
Cat5e unshielded
Cat5e unshielded
Inner box
25PCS
25PCS
20PCS
25PCS
20PCS
Standard Color
White
White
White
White
Beige
Carton
250PCS
250PCS
200PCS
400PCS
200PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
3.80KG
4.20KG
8.50KG
9.30KG
3.50KG
CAT 5E UTP KEYSTONE JACKS
JKB06-UC5E
Cat 5E UTP Keystone Jack (90°C)
Cat 5E UTP Through coupler
JKE11-UC5E
Cat 5E UTP Keystone Jack (180°C)
JKA09-UC5E
SINGLE COUPLER
JKE01-UC5E
DUAL COUPLER
JKE02-UC5E
. 40 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
CAT 5E UTP 24-PORT PATCH PANEL P/N: PND24-UC5E
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Fit for the 110 punch down tools.
Front surface is uninterrupted by screw heads for a clean appearance .
P/N: PND24-UC5E
PRODUCT FIGURE
The patch panel is a 19 inch rack mountable RJ45 jack panels , Each panel has cutouts that accept virtually all snap-in jacks , the kits includes the new icon labels with plastic holders that you mount on the front of the panel for easy port identification .Blank anodized panels can be mounted directly to an EIA standard 19 inch relay back or cabinets .
DESCRIPTION
Design to mount to any standard 19" rack or cabinet 24 -port Cat 5E Patch panel .Space saving ,high-density 1U .Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568B.2Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemesSturdy Aluminum Plate around RJ 45 Jacks Phosphor bronze with 6-50 micro inches gold plated . Available with T568 A .T568 B wiring pattern and meeting the requirement of Cat 5E standard . Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires Metal sheet: Corrosion resistant steelPlastic :fire self -extinguish high impact plastic
FEATURES AND BENEFITS
INSTALLMENT INSTRUCTIONS
A B C D
View the color on the rear of the panel to determine proper location of the conductors based upon preferred wiring scheme.
Insert each wire into the appropriate channel according to the color code on the panel.
Terminate wires using Linkbasic tool (P/N: TLA01) or equivalent.
Inspect wires to ensure proper color-coding following termination.
Cat 5E
123456 78 91 01 11 21 31 41 51 61 71 81 92 02 12 22 32 4
465mm482.5mm
15.5mm 32.5mm
32mm9.5mm
7mm
18mm
2.1mm
17.2mm
33.9mm
44.2mm22.7mm
. 41 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CAT 5E UTP 24-PORT PATCH PANEL
PND24-UC5E
Cat 5E UTP 24-port patch panel
ORDER INFORMATION
Part number
PND24-UC5E
PNA24-UC5E
PNS24-UC5E
PNA24-KJ
Description
24-port Cat5e unshielded patch panels (IDC style )
24-port Cat5e unshielded patch panels (jack style) (JKA08-UC5E)
24-port Cat5e unshielded patch panels (IDC style)
Empty panel
Inner box
1PC
1PC
1PC
1PC
Standard Color
Black
Black
Black
Black
Carton
10PCS
10PCS
5PCS
10PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
8.20KG
10.00KG
8.60KG
7.80KG
Cat 5E UTP 24-port patch panel
PNA24-UC5E PNS24-UC5E
Cat 5E UTP 24-port patch panel
PNA24-KJ
Empty panel
. 42 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Constructed of High-Performance CAT5E Cable Suitable for 100MHz High-Speed Data Applications, Gigabit Ethernet, Fast Ethernet, 155Mbps TP-PMD/CDDI, Boots offer cable-end color ID, strain relief and RJ45 plug tab protection from snagging on cables or connectors when routing in ceilings and under floors, Suitable for Indoor Installations
DESCRIPTION
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectors Fitted with strain relief boots With or without reports made to the order 100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talkExceed Category 5E requirementThey are available in a variety of the lengths
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
FEATURES AND BENEFITS
We offer modular plugs in standard configuration terminate modular cords for patching or Work area application , modular plugs can be terminated to the exact cable length in order to Maintain a nearer , more organized installment , the plugs terminate twist pair cable with 26-22 AWG solid all plugs contracts have 50 micron inches of gold plating over nickel.
DESCRIPTION
6-50 micron RJ-45 staggered gold plated connectors Fitted with strain relief bootsWith or without reports made to the order100% Tested Wiring Sequence and Continuity Excellent Attenuation and Crosstalk Characteristics Connector with staggered pin configuration to limit cross talk Exceed Category 6 requirementThey are available in a variety of the lengths
FEATURES AND BENEFITS
ORDER INFORMATION
Description
Cat 5E UTP Patch Cable
Cat 5E UTP Patch Cable
Cat 5E UTP Patch Cable
Cat 5E UTP Modular plugs
Inner box
1PC
1PC
1PC
500PCS
Carton
---
---
---
5000PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
CAT 5E UTP MODULAR PLUGS P/N: RJB01-UC5E
Part number
CAA01-UC5E-*-#
CAA01-UC5E-LSZH-*-#
CAA01-UC5E-CMR-*-#
RJB01-UC5E
P/N: CAA01-UC5E-*-#
P/N: RJB01-UC5E
CAT 5E UTP PATCH CABLE P/N: CAA01-UC5E-*-#
. 43 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
TELECOMMUNCATIONSERIES
TELECOMMUNCATION CABLE 44-45
46
47
48-49
50
VOICE KEYSTONE JACKS
VOICE PATCH PANEL
110 WRING BLOCKS
110 STYLE PATCH CABLE
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: CAB14-*-#
P/N: WB100-A4
P/N: JKR06-UC3
P/N: CLA25-UC3
. 44 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Conductor
Rated temperature:70℃Reference standard:UL Subject 444, EIA/TIA 568B & ISO/IEC 11801Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel
DESCRIPTION
100 Base-T4100Base-TX
APPLICATION
CONSTRUCTION
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
UTP25 Pair24AWG0.50AWGSolid Bare Copper
HDPE,FRPE0.911.White/B[ue(Ring) & Blue2.White/0range(Nng) & Oange3.White/Gem(Rhg) & Green4.White/Brown(Ping) & BtuwnNoNoNoNoPVC or LSZHPer customer requestPer Customer reqyest
MECHANICAL CHARACTERISTICS
Operating Temp. RangeBulk Cable Weight (KG)Max. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~751C173KG-
92mmCM, CMR,I
ELECTRICAL CHARACTERISTICS
Max. Matual Capacitance @ kHzMax. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMin. Insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤5.6 nF/100M≤330pF /100M
65%
≤45ns/100M9.38Ω /100M (23AWG)
≤5%(per TIA/EIA-568B.2)≤3%(per IEC 61156-2)150
300V
P/N: CLA25-UC5
Rip cord (optional)Outer Jacket
Cross sectionConductor
CAT 5 UTP SOLID CABLE P/N: CLA25-UC5
Insulation
ORDER INFORMATION
Part number
CLA25-UC5
Description
Cat 5 25 pair UTP Solid Cable
Carton
305m(1000ft)
AWG
24AWG
packing Type
Reel
Standard color
RAL7035
Carton measurement
Φ70cm× H40cm
Carton weight
58.80KG
Insulation
Outer Jacket
Cat 5 UTP solid cable RAL 7035
CLA25-UC5
Rip cord (optional)
. 45 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
Conductor
Rated temperature:75℃Reference standard:UL Subject 444, EIA/TIA 568B & ISO/IEC 11801Solid bare copper conductorColour-coded PE insulationRip cord (optional)PVC or LSZH jacketPackaging: Reel
DESCRIPTION
100 Base-T4100Base-TX100VG-AnyLAN1000Base-T1000Base-TX155Mbps ATM622Mbps ATM
APPLICATION
CONSTRUCTION
MECHANICAL CHARACTERISTICSELECTRICAL CHARACTERISTICS
Structure
Insulation
Shield
Outer Jacket
ConstructionNumber of PairsAWGConductor Dimension (mm)Solid or Stranded;Bare or Tinnedinsulation materialInsulation Dimension [mm)Number Colour(Ring or Strip marking)
Cross FillerIndividuaISinleld & MaterialOuter Shield & MaterialDrain WireOuter Jacket MaterialOuter Jacket RipcordOverall Nominal Diameter (mm)
UTP25 Pair24AWG0.493AWGSolid Bare Copper
HDPE,FRPE0.83-
NoNoNoNoPVC or LSZHPer customer request11mm
Operating Temp. RangeBulk Cable Weight (KG)Max. RecommendedPullingTensionMin. Bend Radius (Install)Flame Test
-20~751C170KG-
92mmCMX, CM, CMG, CMR,IEC60332-1
Max. Matual Capacitance @ kHzMax. Capacitanceunbalance (pF/ 100m)Nominal Velocity ofPropagationMax. Delay Skew (ns/100m)Max. Conductor DCResistance @ 20 Deg. CMax. DC Resistanceunbalance @ 20 Deg. CMni. Insulation Resistance(MΩ/ k m)Max. Operating Voltage-UL
≤6.6 nF/100M≤330pF /100M
65%
≤45ns/100M9.38Ω /100M (24`AWG)
≤5%(per TIA/EIA-568B.2)≤3%(per IEC 61156-2)150
300V
P/N: CLA25-UC3
Outer JacketOuter JacketOuter Jacket
Multi pairs Cross section2-pair Cat3 Cross Section1-pair Cross sectionConductorConductorConductor
VOICE UTP SOLID CABLE P/N: CLA25-UC3
InsulationInsulationInsulation
ORDER INFORMATION
Insulation
UTP 1-pair solid cable
Cat 3 UTP 2-pair solid cable
Cat 3 UTP 50-pair solid cable
Cat 3 UTP 100-Pair solid cable
RAL 7004
RAL 7004
RAL 7035
RAL 7035
CLA01
CLA02-UC3
CLA50-UC3
CLA100-UC3
Rip cord (optional)
Outer Jacket
Part number
CLA01
CLA02-UC3
CLA25-UC3
CLA50-UC3
CLA100-UC3
Description
1pair UTP SolidCable
2 pair UTP Solid Cable
Cat 3 25pair UTP Solid Cable
Cat 3 50 pair UTP Solid Cable
Cat 3 100 pair UTP Solid Cable
Carton
500m
305m(1000ft)
305m(1000ft)
305m(1000ft)
305m(1000ft)
AWG
24AWG
24AWG
24AWG
24AWG
24AWG
Standard color
RAL7004
RAL7004
RAL7035
RAL7035
RAL7035
packing Type
Box
Box
Reel
Reel
Reel
Carton measurement
L30.5cm× W20cm × H31.5cm
L30.5cm× W20cm × H32.5cm
Φ55cm× H40cm
Φ55cm× H56cm
Φ90cm× H54cm
Carton weight
5.90KG
5.80KG
55.40KG
108.00KG
210.00KG
. 46 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
VOICE UTP KEYSTONE JACKS P/N: JKR06-UC3
P/N: JKR06-UC3
1500 matching recycles .
Allow RJ11 plugs to provide high-density solutions .
The V style IDC contacts flex not fatigue when terminated .
Compliant with Voice component and channel requirement of T568A and T568B.
The new design allows high density solutions .
PRODUCT FIGURE
This insert works great to add a Telecommunication connection into any room of the house office, it features dual color-coded wiring labels with both T568A and T568B wiring pattern, a rear termination field for easy termination of a jack while installed in a wall plate, surface mount boxes, and blank patch panels for a wide variety of Applications.
DESCRIPTION
Available in Telecommunication,T568 A/B wiring scheme, meet or exceed TIA/EIA VOICE requirementsHousing : high temperature thermoplasticCompact jack design,6 positions and 6 conductorsContact : phosphor bronze , phosphor bronze with 6 to 50μ" gold plateAccept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mmEasy to be terminated, extremely low attenuation loss and high return lossHigh reliability and superior performanceAvailable in different colors
APPLICATION
CONSTRUCTION
DescriptionContact resistance(max)Insulation resistance(min)Return loss(dB)Next(dB)Ps next(dB)
Parameter100mΩ500MΩ5.8dB4.7dB5.5dB
INSTALLMENT INSTRUCTIONS
A B C F G
Strip back cable jacket and fan out cables based on desired wiring scheme, cut the pair separator and rip cord (if present) as close as possible to the jacket. Note: Be careful not to nick conductors.
View the color on the module to determine proper location of the conductors based upon preferred wiring scheme.
Insert each wire into the appropriate channel according to the color code on the modular's both sides.
Terminate wires using Linkbasic tool (P/N: TLA01) or equivalent.
Install dust caps by snapping into place as shown.
12mm4mm
20mm
20.8mm
31mm
14.5mm
19.9mm
7.9mm
16.1mm17.6mm
7.9mm1.8mm
Termination caps prevent wire from dropping off .
ORDER INFORMATION
Part number
JKR06-UC3
Description
Communication keystone jacks
Inner box
25PCS
standard color
White
Carton
250PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
4.00KG
. 47 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
ORDER INFORMATION
Blank anodized panels can be mounted directly to an EIA standard 19 inch rack or cabinet
Feature universal wiring for both T 568A and T 568B and voice application .
Bold port numbering enables quick and ready identification of outlets .
Fit for the 110 punch down tools.
Front surface is uninterrupted by screw heads for a clean appearance .
P/N: PNT25-UC3
PRODUCT FIGURE
linkbasic's voice patch panels are the perfect solutions for bringing voice to your cable rack ,pre-configured in 25 and 50 port densites and designed specifically for voice grade application .
DESCRIPTION
Design to mount to any standard 19" rack or cabinet Space saving ,high-density 1U Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel 110& krone punch down tools are available Phosphor bronze with 6-50 micro inches gold plated Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation Metal sheet: Corrosion resistant steelPlastic :fire self -extinguish high impact plastic
FEATURES AND BENEFITS
INSTALLMENT INSTRUCTIONS
BA C D
Insert each wire into the appropriate channel.
Terminate wires using Linkbasic tool (P/N: TLA01) or equivalent.
Check and ensure each wire in correct slot. Insert the jack into the correct mounting location properly.
44.2mm
132mm
21.25mm
14.2mm
32mm
465mm483mm
9.5mm7mm
14mm 16.5mm
Voice 25-pair patch panel Voice Cat 3 50-Pair patch panel
PNT25-UC3 PNT50-UC3
Part number
PNT25-UC3
PNT50-UC3
Description
25-port voice patch panel
50-port voice patch panel
Inner box
1PC
1PC
standard color
Black
Black
Carton
5PCS
5PCS
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
8.50KG
10.20KG
VOICE 25-PORT PATCH PANEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
. 48 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
110 WRING BLOCKS P/N: WB100-A4
The 110 wiring bases features sturdy single-piece construction of fire-retardant plastic rated UL..
P/N: WB100-A4compact , adaptable 110 termination fields for voice or data .
PRODUCT FIGURE
Wall-mount 110 wiring blocks create compact, adaptable 110 termination field for voice and data by mounting 110 wiring bases to the wall or a backboard. Bases come in 50-, 100- or 300-pair densities. The 50-pair bases may be ordered with or without standoff legs which provide more room behind the base for cable.
DESCRIPTION
Type : 50 pairs rack mount 110 wiring blockAvailable with legs or without legs to the wiring base Easy to adjust , easy to embed wires in Wiring blocks are designed to support voice and high-speed data applicationOffering a reliable and economical high -density systemThe terminal blocks accommodate 22-26 AWG with a insulation diameter of 0.4-0.64 mmIDC contact material : phosphor bronze with tin plating over nickelAvailable with T568 A .T568 B wiring pattern
APPLICATION
39.5mm
43mm
215.7mm
142mm
206.1mm
45.7mm
84mm39.5mm
43.4mm
260mm
22.8mm
215.7mm
40.5mm 271.9mm5mm
12.5mm
43.4mm
3.5mm6.5mm
INSTALLMENT UNSTRUCTIONS
A B C
D E
Insert each wire into the appropriate channel. Terminate wires using Linkbasic tool (P/N: TLB01) or equivalent.
4-pair impact tool seats connecting blocks.
Install connecting block in the wiring block tightly. Insert patch plug into connecting block, and ensure them in tight connection.
P/N: CBB04 P/N: CBB05
. 49 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
110 WRING BLOCKS
Rack-mount 110 wiring products attach to standard 19" wide racks to create compact, adaptable 110 termination fields for voice and data. Panel come in 100- ,200-pair densities and termination 22-26 AWG solid copper wire.
Blocks are available in 100-, 200-pair for 19 inch rack mounting
DESCRIPTION
APPLICATION
100 pair rank mount wring block
50 pair wiring block without legs 50 pair wiring block with legs
100 pair wiring block without legs 4 pairs 110 connecting block 5 pairs 110 connecting block
100 pair wiring block with legs
WB100-A4
WB050-A3W WB050-A3Y
WB100-A3W CBB04 CBB05
WB100-A3Y
ORDER INFORMATION
Description
100 pair rank mount wring block
50 pair wiring block without legs
50 pair wiring block with legs
100 pair wiring block without legs
100 pair wiring block with legs
4 pairs 110 connecting block
5 pairs 110 connecting block
Inner box
1PC
2PC
2PC
1PC
1PC
200PCS
200PCS
Standard Color
Beige
Beige
Beige
Beige
Beige
Beige
Beige
Carton
10PCS
20PCS
20PCS
10PCS
10PCS
2000PCS
2000PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 54cm×W 49cm×H 22cm
L 61cm×W 54cm×H 22cm
L 54cm×W 49cm×H 22cm
L 61cm×W 54cm×H 22cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
9.00KG
5.00KG
5.70KG
5.00KG
5.70KG
11.00KG
11.50KG
Part number
WB100-A4
WB050-A3W
WB050-A3Y
WB100-A3W
WB100-A3Y
CBB04
CBB05
. 50 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
110 STYLE PATCH CABLE
P/N: RJR01-UC3
The patch plugs are tested and verified to meet and exceed the connecting hard performance Requirement . they are used in a cross connect field to provide modularity and quick termination to connecting blocks or as an interconnection method .
The patch plugs are tested and verified to meet and exceed the connecting hard performance requirement . they are used in a cross connect field to provide modularity and quick termination to connecting blocks or as an interconnection method.
DESCRIPTION
DESCRIPTION
Provide a system solution for patching to the connecting blockIt has a sturdy, reinforced design to hold up under punch down terminationIt is ergonomically styled for easy handlingAvailable in 1 ,2 and 4 pairs
APPLICATION
Meet or exceed attenuations and Category 5E specification for patch cablesProvide a system solution for patching to the connecting blockIt has a sturdy, reinforced design to hold up under punch down terminationIt is economical style for easy handlingAvailable in 1 ,2 and 4 pairs
APPLICATION
110-style 2-pair Patch Cable
CAC22-*-#
110-style 1-pair Patch Cable
CAC11-*-#
110-style 4-pair Patch Cable
CAC44-*-#
RJ45-1-pair patch Cable
CAB11-*-#
Use * to specify the length :
1=1 meter, 2= 2 meters , 3=3 meters
Use # to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
ORDER INFORMATION
Description
110-style 1-pair Patch Cable
110-style 2-pair Patch Cable
110-style 4-pair Patch Cable
RJ45-110 style 4 pairs Cable
RJ45-1-pair patch Cable
Poly bag
1PC
1PC
1PC
1PC
1PC
Standard Color
RAL7004
RAL7004
RAL7004
RAL7004
RAL7004
Part number
CAC11-*-#
CAC22-*-#
CAC44-*-#
CAC14-*-#
CAB11-*-#
1 pair 110 patch plugs 2 pair 110 patch plugs 4 pair 110 patch plugs
RJC01 RJC02 RJC04
ORDER INFORMATION
Description
one pair 110 patch plugs
two -pair 110 patch plugs
four- pair 110 patch plugs
Cat 3 UTP Modular plugs
Inner box
50PCS
50PCS
50PCS
100PCS
standard color
RAL7004
RAL7004
RAL7004
Transparent
Carton
500PCS
500PCS
500PCS
1000PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Carton weight
3.90KG
6.50KG
6.50KG
6.80KG
Part number
RJC01-UC3
RJC02-UC3
RJC04-UC3
RJR01-UC3
110 STYLE PATCH PLUGS
RJ45-1-pair patch Cable
CAB14-*-#
. 51 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
COPPER SOLUTIONPRODUCTS ACCESSORIES
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: FSA09
P/N: MTC04
P/N: PBB01
P/N: CSA01
P/N: OUD01
FACEPLATE 52-53
54-55
56-57
60
78-59
60
60
SURFACE MOUNT BOXES
HORIZONTAL CABLE MANAGEMENT
GROUND SOCKET
TOOLS
CABLE TESTER
PLUG BOOTS
. 52 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
UK STYLE FACEPLATE P/N: OUD21
P/N: OUD21
P/N: OUD22
P/N: OUD24
The wall plate is made from high-impact ABS plastic, making for years of durable use. Each delivers high speed of for all your high-speed applications to the desktop. Perfectly blends into the decor of your home or office ,Protects and hides your network connections ,Accepts all keystone inserts. Standard 110 type IDC termination makes installation fast and easy.
DESCRIPTION
One .two , four and six portsDesigned for for Cat 5e or Cat 6 performance and meet EIA/TIA specifications Fit for RJ45 keystone jack outlet plates Packing includes the modular faceplate and two mounting screws for Installation Material: PC or ABSColor: white or Ivory
APPLICATION
Dual ports UK faceplate
OUE02
INSTALLMENT UNSTRUCTIONS
A B C
The back of the faceplate. Carefully seat the jacks over the back of the faceplate. Align the jack to the slot .
ORDER INFORMATION
Description
One port UK faceplate
Dual ports UK faceplate
Four ports UK faceplate
Dual ports UK faceplate
Inner box
15PCS
15PCS
15PCS
15PCS
Carton weight
8.00KG
8.20KG
8.10KG
7.90KG
Carton
150PCS
150PCS
150PCS
150PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Part number
OUD21
OUD22
OUD24
OUE02
. 53 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
UK STYLE FACEPLATE
The wall plates is made from high-impact ABS plastic, making for years of durable use. Each delivers high speed of for all your high-speed applications to the desktop.
DESCRIPTION
One .two , four and six portsDesigned for for Cat 5e or Cat 6 performance and meet EIA/TIA specifications Fit for RJ45 keystone jack outlet plates Packing includes the modular faceplate and two mounting screws for Installation Material: PC or ABSColor: white or Ivory
APPLICATION
One port USA faceplate Twe ports USA faceplate Four ports USA faceplateThree ports USA faceplate Six ports USA faceplate
OUS01 OUS02 OUS04OUS03 OUS06
ORDER INFORMATION
Description
US style faceplate( one -port)
US style faceplate( two - port)
US style faceplate( three-port)
US style faceplate( four-port)
US style faceplate ( six- port)
Inner box
20PCS
20PCS
20PCS
20PCS
20PCS
Standard Color
White
White
White
White
White
Carton weight
6.50KG
6.50KG
6.50KG
6.50KG
6.50KG
Carton
200PCS
200PCS
200PCS
200PCS
200PCS
Carton measurement
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Part number
OUS01
OUS02
OUS03
OUS04
OUS06
. 54 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
SURFACE MOUNT BOXES P/N: OUZ22
snap- on cover with designation areas for color coded icons /tabs and white-on labels.
P/N: OUZ22
Bezels are included , allow flat jacks to be snapped in place .
Use this surface mount box like you would use a outlet face plate to cover and connect keystone connectors to the wall and make a nice neat looking wiring for the house or office , they come in a variety of the styles including our 110 style punch down surface mount boxes .the surface mount boxes features a compact , easy to install design ,Components can be Installed into the base .
DESCRIPTION
they meet or exceed EIA/TIA 568A Cat 5e or Cat 6 specifications Holds industry standard modular keystone insertsHigh-Impact Housing.Fully tested.Available in one or two port .
APPLICATION
INSTALLMENT UNSTRUCTIONS
A B C D
The back of the faceplate. Carefully seat the jacks over the back of the faceplate. Align the jack to the slot . Snap the plug in place.
. 55 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
SURFACE MOUNT BOXES
One- port Surface mount box
One- port Surface mount box Twe- port Surface mount box
Twe- port Surface mount box
OUZ01 OUZ02
OUZ22
Mount Box Mount Box
OUX12-1 OUX12-2
Mount Box
OUX86-1
ORDER INFORMATION
Description
one port surface mount box
two port surface mount box
one port surface mount box
two port surface mount box
mount box
mount box
mount box
Carton
250PCS
200PCS
250PCS
100PCS
100PCS
100PCS
100PCS
Standard Color
White
White
White
White
White
White
White
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.6cm× W 31.3cm × H 24.6cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
Carton weight
5.00KG
5.50KG
8.80KG
5.00KG
6.50KG
6.00KG
6.00KG
Part number
OUZ11
OUZ12
OUZ01
OUZ02
OUX86-1
OUX12-1
OUX12-2
OUZ21
. 56 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
P/N: MTC04
The horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19" racks or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.
The bracket can be mounted on the rear of the rack to provide cable support, or it can be mounted over a patch panel, to provide management and support to patch cords. At each end of the cable management bracket, Package includes rack screws, for use with distribution racks.
DESCRIPTION
DESCRIPTION
Feature: Standard EIA 19" rack and Cabinet mount Management improves the look of a closet or workstation , it is an essential element For easy adds , moves or changes , it is also crucial to maintaining cable integrity by Ensuring resisted steel and ABS Light weight ,easy to install or removal The panel is configured with 24 ringsColor: black anodized Custom-made cable management is acceptable
Ideal tool to organize and support the horizontal cables at the back of your equipment rack 19" width for standard rack mount applications Supports the horizontal cables at the back of your rack, as it organizes themMaterial: they improve the look of a closet or workstation , it is an essential element for easy adds , moves or changes , it is also crucial to maintaining cable integrity Light weight ,easy to install or removal
APPLICATION
APPLICATION
PRODUCT FIGURE
PRODUCT FIGURE
Horizontal Cable Management 1U Horizontal Cable Management 1U
Horizontal Cable Management 1U
MTC04
Horizontal Cable Management 1U
MTD01
MTC01
MTD03
18.5mm
15mm
445mm482mm
465mm
26.3mm
96.8mm
1.5mm
5mm
HORIZONTAL CABLE MANAGEMENT P/N: MTC04
482mm 44mm
44mm
53mm50mm 12.5mm
. 57 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
P/N: MTE01
The Cable Management is a moulded plastic frame which is placed between each 110 wiring block and at the top of each column of 110 blocks. It serves as a horizontal trough for the routing of patch cords and cross-connect wire. It mounts on standard 19" racks or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.
DESCRIPTION
Mount to standard EIA 19" racksSuitable for installing on the panel, Help maintain cable bend radius.Light weight ,easy to install or remove
APPLICATION
Velcro cable tie Velcro cable tie
Brush panels
MTF01 MTF02
MTE01
HORIZONTAL CABLE MANAGEMENT P/N: MTE02
ORDER INFORMATION
Description
1U cable management
1U cable management
1U cable management
1U cable management
Brush panels
Velcro cable tie
Velcro cable tie
Carton
10PCS
10PCS
20PCS
10PCS
40PCS
---
---
Inner box
1PC
1PC
2PC
1PC
4PC
100PCS
100PCS
Standard Color
Black
Black
Black
Black
Black
Black
Beige
Carton weight
4.80KG
4.80KG
22.00KG
22.00KG
22.00KG
---
---
Part number
MTC01
MTC04
MTD01
MTD03
MTE01
MTF01
MTF02
Carton measurement
L 53.5cm× W 31.3cm × H 23.4cm
L 53.6cm× W 31.3cm × H 24.6cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
L 53.5cm× W 31.3cm × H 23.4cm
. 58 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
TOOLS
The 110 single -pair impact tool is designed to seat 110 connecting blocks and terminate and cut cable on 110 wiring blocks. Saving time and money, The tool feathers an easy way to hold ,ergonomically designed handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base .
These series of tools are particularly designed for our voice solution products ( LAS series ) .it is compliant with Krone insertion tools ,Suitable for clamp modules designed handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base .
These series of tools are particularly designed for our new products ( JKG series ) . the tool feathers an easy way to hold . designed handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base .
The 110 5-pair impact tool is designed to seat 110 connecting blocks and terminate and cut UTP cable on 110 wiring blocks. Saving time and money, it makes large termination jobs small by greatly reducing the number of punch cycles. Cartridge is adjustable to cut/no-cut positions and terminates 22-26AWG solid and stranded wires with single insulation. Tool also has twist and lock head.
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Designed to terminate wires on 110 clips. LIREPLACEABLE blades Comfortable ergonomic grip
With sensor For krone IDC block and LSA module
Light weight and easy to use .Available in blue color.
Comfortable handle shape with overmolded cushioning quick, easy blade loading Replaceable punch-down head Comfortable ergonomic grip Replaceable cartridge blades Common handle for 4- and 5-pair heads Sharp blades
APPLICATION
APPLICATION
APPLICATION
APPLICATION
Single pair 110 style impact tools
Insertion tools
Crimp Jack tools
Multi- pair 110 style impact tools
TLA11
TLA03
TLA02
TLB01
. 59 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
TOOLS
this high-quality ratcheting crimp tool is designed to crimp and cut quickly the wires of the RJ45 Connector . The parallel action design maintain accurate alignment of the die with the plug for a precision crimp every time.
this high-quality ratcheting crimp tool is designed to crimp and cut quickly the wires of the RJ 45 and RJ 11 Connector . The parallel action design maintain accurate alignment of the die with the plug for a precision crimp every time.
this high-quality ratcheting crimp tool is designed to crimp and cut quickly the wires of the RJ45 Connector . The parallel action design maintain accurate alignment of the die with the plug for a precision crimp every time.
DESCRIPTION
DESCRIPTION
DESCRIPTION
Designed to terminate wires on 110 clips. LIREPLACEABLE blades Comfortable ergonomic grip
For cutting modular Plug RJ 45 and RJ 11 . Cut & strip by one operation Easy & effective . Light weight , middle carbon steel material , durable & compact tool . With round or flat cable stripper . Replacement cutting blades available. Quick Release Safety Latch
For cutting modular Plug RJ 45 and RJ 11 . Cut & strip by one operation Easy & effective . Light weight , middle carbon steel material , durable & compact tool . With round or flat cable stripper . Replacement cutting blades available. Quick Release Safety Latch
APPLICATION
APPLICATION
APPLICATION
RJ45 Crimp tools
RJ45 and RJ11 Crimp tools
Cable stripper
TLC03
TLC11
TLD01
ORDER INFORMATION
Description
sIngle pair 110 style impact tool
Crimp jack tools
Insertion tools
multi pair 110 style imact tools
RJ45 and RJ11 Crimp tools
RJ45 Crimp tools
Cable stripper
Inner box
5PCS
20PCS
5PCS
5PCS
5PCS
5PCS
10PCS
Standard Color
Blue
Blue
White
Black
Black
Black
Black
Carton weight
8.00KG
7.00KG
6.00KG
27.00KG
29.20KG
15.00KG
6.00KG
Carton
50PCS
200PCS
50PCS
50PCS
50PCS
50PCS
100PCS
Carton measurement
L 62cm×W 29cm×H 30cm
L 53.5cm×W 31.3cm×H 23.4cm
L 62cm×W 29cm×H 30cm
L 66cm×W 33cm×H 30cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
L 53.5cm×W 31.3cm×H 23.4cm
Part number
TLA11
TLA02
TLA03
TLB01
TLC11
TLC03
TLD01
. 60 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
PLUG BOOTS
The 110 single -pair impact tool is designed to seat 110 connecting blocks and terminate and cut cable on 110 wiring blocks. Saving time and money, The tool feathers an easy way to hold ,ergonomically designed handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base .
Design for the testing of the UTP and screened for the opens , shorts , reversals, mis-wiring and so on , this tester allows one person to quickly test and identify up to different hour runs from the one locations .This ethernet cable tester quickly and easily checks for cable continuity, mis-wiring, open, short, straight-through or cross pinning.
DESCRIPTION
DESCRIPTION
Ground-fault interrupter is an unintentional electrical path between a source of electrical current and a grounded surface. Electrical shock can occur if a person comes into contact with an energized part. GFCIs (ground-fault circuit-interrupters) can greatly reduce the risk of shock by immediately shutting off an electrical circuit when that circuit represents a shock hazard (a person comes in contact with a faulty appliance together with a grounded surface). They are characterized by their adaptability to diversification of architectural specification .
DESCRIPTION
Designed to terminate wires on 110 clips. LIREPLACEABLE blades Comfortable ergonomic grip
For UTP/STP -4 &2 pairs lan cable (10/100 Base-T) .For telephone line cable .Coaxial cable (BNC-BNC) 10 Base-2 .
APPLICATION
APPLICATION
positive protection against electronic shockThey will operate well because of overheating. and waterproofThey will operate at their design speed
APPLICATION
Plug Boots
PBB01-*
Cable Tester
CSA01
Socket
FSA09
AMP modular board CommScope modular board Blank Board
FSP09 FSP11 FSP27
Ground Socket
FSF04
Ground Socket
FSD06
GROUND SOCKET
CABLE TESTER
ORDER INFORMATION
Description
plug boots
ground socket
ground socket
ground socket
AMP modular board
Commscope modular board
black board
Cable tester
Inner box
100PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
Standard Color
---
Gold
Gold
Beige
Beige
Beige
Beige
White
Part number
PBB01-*
FSA09
FSD06
FSF04
FSP09
FSP11
FSP27
CSA01
Use * to specify the color :
A = black B =blue C =red D= orange E=yellow F= gray G =green
. 61 .
www.linkbasic.com
LINKBASIC INFORMATION TECHNOLOGY CO.,LTD
CABINET & ENCLOSURE
www.linkbasic.com
Cableandnetconnectorassemblies
LINKBASIC INFORMATION TECHNOLOGY CO., LTD
2013 CATALOG
FIBER OPTIC SOLUTION PRODUCTS
www.linkbasic.com
Cableandnetconnectorassemblies
LINKBASIC INFORMATION TECHNOLOGY CO., LTD
2013 CATALOGCOPPER SYSTEMS
www.linkbasic.com
Cableandnetconnectorassemblies
LINKBASIC INFORMATION TECHNOLOGY CO., LTD
2013 CATALOG
. 62 .
CABLE AND NETCONNECTOR ASSEMBLIES
LINKBASIC INFORMATION TECHNOLOGY CREATE AN EXCELLENCE IN THE FUTURE
Contact us
Mailing address: Add: No.31 Of Zhuyou Road, Xiangcheng District, Suzhou, Jiangsu, China, 215143
International trade department: North American & Western EuropeRegional Sales Manager: Aaron Foo TEL: +86-512-69399046 FAX: +86-512-69399052 E-mail: [email protected]
South American & Eastern EuropeRegional Sales Manager: Ferdinand TEL: +86-21-34635371FAX: +86-512-69399052 E-mail: [email protected]
Asian & AfricanRegional Sales Manager: Michael Wang TEL: +86-512-69399047 FAX: +86-512-69399052 E-mail: [email protected]
OceaniaRegional Sales Manager: Jennifer Qi TEL: +61-02-95021886 FAX: +61-02-95021928 E-mail: [email protected]
www.linkbasic.com