(lined dice bags – for all your polyhedral needs _ i could make that)

7/27/2019 (lined dice bags for all your polyhedral needs _ I Could Make That)

1/21

PAX is coming, PAX is coming! The Penny Arcade Expo, that massive convention of video game

goodness and fellowship, begins next Friday, and its time to prepare.

Theres tons of advice out there about how to survive a convention, the most common salient points being

things like: shower daily, wear comfortable shoes, carry hand sanitizer at all times and for the love of your

everlasting karma, be kind to the poor harried event organizers and your fellow convention goers.

What Imgoing to offer by way of fresh new convention advice is to always carry a dice bag. Becauseinevitably you will find yourself at that booth that sells dice by the cupful, drooling gently and murmuring,

Ooooh, preeeeeetty. And youll remember that you dont have a set ofbluedice yet, and the d4 from

your favourite set went missing last month, and theyre so well priced if you buy them by the scoopful

And then youll want somewhere pretty to put all the polyhedral jewels youve just bought.

Or to store your MtG counters, or to keep that little bottle of hand sanitizer, or your change (why do

wallets neverhave coin pockets large enough to hold more than four quarters at once?), or the rub-on

Optimus Prime tattoo you plan to paste on your buddys forehead when he passes out later.

Or buttons! Ive decided to join in the buttoneering at PAX this year, and give out buttons with my little

imaginary Tallys Bestiary critters on them.

dice bags for all your polyhedral needs | I Could Make That http://nheilke.com/blog/2011/08/lined-dice-bags-for-all-your-poly

1 3/5/2012


2/21

I also have about a dozen sets of hand printed buttons (the printing part being a craft that Ill post

sometime) for sale for $3 each, to the first dozen or so people who find me and want them.

And now, back to the dice bags! Thing is, its really easy to make a nice, lined, round-bottomed dice bag

that holds your stuff and sits prettily upright and impresses your friends when you tell them that you made

it yourself. This tutorial will show you how to make said bag, and the basic concept for making a small

lined bag is useful for many other lined bag projects as well.

Note: If you do not have a sewing machine, do not despair! This weekend, I will also post a tutorial for

hand sewing a dice bag from felt. Thats right, two posts in one week!I must be insane. You will soon be

able to find instructions for a hand-sewn felt dice bag. EDIT: Here it is, a tutorial for a hand-sewn felt

dice bag!

What youll need:

fabric (Two colours, one for the outside and one for the lining. Or you can do the outside and lining


1 3/5/2012


3/21

from the same colour.)

thread to match the fabric.

fabric scissors

straight pins

pencil

ruler

sewing machine (or see the note above about the hand-sewn version of this bag)

seam ripper

narrow ribbon - a piece about 20-24 inches long

safety pin

fray checkORclear nail polish

Putting it all together:

1) From each of your colours of fabric, cut a rectangle 6 inches wide by 12 3/4 inches long.

Then cut a circle that measures 4 inches across. Or just print and use this dice bag

base template, which is probably way simpler.


1 3/5/2012


4/21

To make a dice bag of a different size, start with the circle size you want (this will be the bags base, and

you can just trace a convenient bowl or lid). Then measure the diameter (width) of the circle and multiply

it by pi (3.141592). The resulting number is how long you need to cut your rectangle. You can also make

your rectangle wider, to make a taller bag, or narrower to make a shorter bag.

2) Take the rectangle you want to use for the outside of the bag, and fold it in half. Stick a

pin in the center fold of the fabric.


1 3/5/2012


5/21

3) Open up the fabric, and, on the front side, use a pencil to draw a little vertical line right

where the pin is. Make the mark about 1/2 inch long, and leave a 1/2 inch gap between the

mark and the top edge of the fabric.*

*As you can see, I left a much larger gap, which was a mistake that I had to fix later. So ignore that part

of the photo, and make your mark closer to the top edge of the fabric.

4) Ok, this is the only particularly tricky part of the process, and it shouldnt really be too bad.Youre


1 3/5/2012


6/21

going to use your sewing machine to make a buttonhole right over the pencil mark.

Dont freak out! Buttonholes terrify many people (myself included, until recently), but all you need to do is

figure out how your machine works, and practice on a bit of scrap fabric until youre confident. Now, all

machines are a little different, but on mine, for example, I simply have to turn my two dials to the red

buttonhole setting, as in the photo below.

One important thing to note: on my machine and, I believe, on many sewing machines, the needle starts

by going backwards when you are making a buttonhole. This means that I need to start the needle at the

bottomof my pencil mark. The needle goes up, over, and back down again to make the buttonhole.

On my machine theres a little buttonhole arm that comes down behind the needle (see the photo below).

I ignore it at first, and just start the needle going at the bottom of my pencil mark. It goes back and forthdoing a wide stitch for a moment, then starts going backwards, doing a narrow, close-together stitch.

When it gets to the top of the pencil mark, I stop the needle, push the little buttonhole arm, and start

stitching again. The needle does another wide stitch briefly, then comes back down the fabric, doing a

narrow stitch a tiny ways apart from the the first line of stitching. Once its back at the bottom of the

pencil mark, I backstitch to knot the thread, then lift the presserfoot and cut the thread and Im done.


1 3/5/2012


7/21

As I say, its different on every machine, but probably not too much different. Experiment a couple times

on scrap fabric till youve got it figured out. If you dont have an instruction booklet for your sewing

machine, you may be able to get information by looking up its make and model number online. And for

this particular buttonhole, you do not need to use a fancy buttonhole presserfoot, even if you have one.

Remember to reset your sewing machine when the buttonhole is done, back to a normal straight stitch

setting.

As I mentioned in step 3, your buttonhole should be closer to the top edge of the fabric than mine.

5) Use your seam ripper to dig into the fabric in the buttonholes center, cutting it and

leaving an actual hole between the stitching.


1 3/5/2012


8/21

6) Now fold this rectangle of fabric in half again (right sides together) and pin the ends

together.


1 3/5/2012


9/21

7) Stitch the ends together. Keep the edge of the fabric lined up with the edge of your

presserfoot for the correct seam allowance.*

*A fancy term for how much fabric is left on the outside of the line of stitching.

You should now have a tube of fabric, open at both ends.


1 3/5/2012


10/21

8) Now take the circle you cut in step 1, the one cut from the same fabric as this rectangle.

With the circles right side facing inwards, pin its edges to the edges of one end of your

fabric tube the end that does NOT have the buttonhole!

9) Stitch all the way around the circle at the base of the tube, removing pins as you go.

(Sewing over pins is bad for the pins and bad for the sewing machine, so try to avoid it.)

Again, keep the edge of the fabric matched up with the edge of the presserfoot as you sew.


21 3/5/2012


11/21

Youll probably notice a bit of puckering at the bottom of the bag, where the rectangle and circle join up.

Thats fine and normal.

10) Set this aside, and take up the rectangle of other fabric, the fabric you want to use forthe bags lining. Fold it in half (right sides together), pin the edges together, and sew the

edges together.Youll now have another tube with open ends.


21 3/5/2012


12/21

11) Pin the lining circle to one end of the tube, right side facing in. Sew it in place.

12) Turn the lining right side out, and push it inside the first tube you made, matching up

their seams.


21 3/5/2012


13/21

13) Pin the top edges of the lining and the outside fabric together. On one side, use two

pins together to mark a two-inch gap, where you will notsew the fabric together.


21 3/5/2012


14/21

14) Starting at the first set of double pins, sew around the top edge of the bag, stitching the

two layers together. Keep your fabric edge lined up with your presserfoot edge. Stop at the

second set of double pins, backstitching to knot the thread. You should be left with about 2

inches where the two layers are notsewn together.


21 3/5/2012


15/21


16/21

17) Stitch all the way around the top edge of the bag. This time, leave only about 1/8 inch

between the stitching and the edge of the fabric. To do this, I make sure the edge of the fabric is

following the edge of the little oval opening in the middle of my presserfoot.

This will close up the gap you used to turn the bag inside out.


21 3/5/2012


17/21

18) Now sew another line, about 1 1/2 inches below the bags top edge. To do this, find a

line on your sewing machine in about the right place that you can keep the fabrics edge

lined up with.

19) Next take your ribbon, and attach the safety pin to one end. Insert the safety pin into

one side of the buttonhole at the top of the bag.


21 3/5/2012


18/21

20) Work the safety pin all the way around the bag. To do this, hold the back end of the

safety pin through the fabric, and scrunch more fabric up over it. Then grab front other end

of the safety pin with your other hand, and let go of the pins back end. Continue this until

the safety pin pokes out the other side of the buttonhole, then pull till theres an equal

amount of ribbon dangling from either side of the hole.


21 3/5/2012


19/21

21) Knot the ribbons ends and put some fray check or clear nail polish on them to keep

them from fraying. Tie the two ribbon ends together and pull to close the bag.


21 3/5/2012


20/21


21/21

Posted by Tally on August 19, 2011

http://nheilke.com/blog/2011/08/lined-dice-bags-for-all-your-polyhedral-needs/


(lined dice bags – for all your polyhedral needs _ i could make that)

Documents