linear actuator with potentiometer pa-14p
TRANSCRIPT
how to order
1.800.676.6123
Input Voltage: 12 VDC Current: 5A at full load Load Capacity: 150 lbs Static Load: 330 lbs Speed: 0.40” per second Stroke length: 1” to 40” Mounting holes: 0.25” diameter Potentiometer: 10K ohm Screw: ACME Screw Duty Cycle 25% Operational Temperature: -26ºC~65ºC (-15ºF~150ºF) Limit Switch: built-in non movable IP Grade: IP54 Certification: CE and RoHS Housing: Aluminum Allow Gears: Powder Metallurgy Wire Length: 40” Gear Ratio: 20:1
For Custom options See Page 3
dimenSionS in inCheS
www.ProgreSSiveautomations.com
PA-14P LineAr ACtuAtor WITH POTEnTIOMETER
SPeCiFiCAtionS:
12 vdC SPeed vS LoAd
12 vdC Current vS LoAd
Page
1 of
3
Page
2 o
f 3
how to order
1.800.676.6123
3d modeL (CLiCk to ACtivAte) hoLe to hoLe dimenSionS
www.ProgreSSiveautomations.com
ProduCt ACCeSSorieS:
Will work with any PA’s AC & DC controls boxes Mounting Brackets: BRK-14 (for each end); BRK-03 Rocker Switches: any PA’s Rocker Switches Foot Controls: PDL-01, PDL-02 and PDL-03 Rubber Boot: AC-20
Potentionmeter
PA-14P LineAr ACtuAtor WITH POTEnTIOMETER
how to order
1.800.676.6123
CuStom oPtionS:
www.ProgreSSiveautomations.com
Voltage: 24/36/48 IP Grade: IP65 Feedback: Hall Effect Sensor Wire length: Customizable Stroke Size: 1” – 40” in increments of 0.25” Mounting Holes: Customizable size and Dimensions Connectors: Add your specific connector Custom Dimensions: Change size and stroke of unit based on your requirement Gearing: Full metal gears or plastic gears Customizable forces available: 35 lbs (speed 2”/sec) and 50 lbs (1.2”/sec)
AdditionAL oPtionS Are ALwAyS being Added, PLeASe give uS A CALL iF you need A CuStom oPtion you do not See here 1-800-676-6123.
Page
3 o
f 3
PA-14P LineAr ACtuAtor WITH POTEnTIOMETER