lineage infinity d power supply

P R O D U C T O V E R V I E W

OverviewThe Lineage Power Infinity D™ DC energy system is a modular power plant that supports dual voltage (+24V/-48V) operation through the use of a comprehensive range of state of the art rectifiers and DC-DC converters. Primary voltage is supported by rectifiers and battery reserve, while secondary voltage is supported by DC-DC converter modules. Primary voltage can be -48V or +24V.

The Infinity D Power System has primary voltage capacity for +24V and -48V power up to 1,600A; secondary voltage capacity is up to 300A per expansion module.

Shelf OptionsThe Infinity D Power System is built upon a modular architecture that consists of 8” (203mm) tall system modules. The system modules are complete “mini systems” which can be combined to form larger systems. Since each system module is an optimized combination of power and distribution there is minimal unnecessary capacity and cost is minimized. As the system is expanded, additional optimized combinations of capacity are added,

again minimizing incremental cost. System modules are added to achieve up to 1,600A capacity.

Infinity Rectifier and Converter FamilyThe Infinity D offers DC rectifiers and converters for both +24V to -48V and -48V to +24V applications. Rectifiers and converters are color coded to quickly identify both the voltage and whether it is a rectifier or converter (orange for +24V and blue for -48V).

Rectifier and Converter Options:

- NE100AC24 Rectifier, 100A/24V Output

- NE050AC48 Rectifier, 50A/48V Output

- NE075DC24 Converter, 75A/24V Output

- NE030DC48 Converter, 30A/48V Output

Pulsar Plus Controller The Infinity D utilizes the industry leading Pulsar Plus controller with Ethernet and SNMP communications to deliver extensive monitoring and control features with remote access.

BenefitsReliability– Distributed fault tolerance

– Proven field performance

– Controller continuity

Intelligence– Industry leading controller features

– Ethernet interface for remote access

– Centralized network management

Investment Protection– Small initial deployments

– Modular expansion allows growth as needed

– Efficient operation

– Secondary voltage flexibility +24V/-48V

On Time Delivery– Standard building blocks

– 4 - 6 week availability

– 24/7 support

Total EfficiencyThe Lineage Power Total Efficiency™ (TE) architecture reduces energy loss and lowers cooling costs by 50-70%. TE products will prioritize sustainable energy sources like solar, wind, water and fuel cells over traditional utility grid or diesel generator sources – and they will intelligently respond to smart grid information to reduce consumption during peak demand periods. Active Rectifier Management (ARM) and Battery Charging Optimization (BCO) features increase efficiency on current and legacy power infrastructures. The Total Efficiency architecture addresses issues end-to-end based on our proven experience and expertise in batteries, power distribution, DC energy systems, AC-DC power supplies, and DC-DC board mounted power to deliver a solution that is more safe, reliable and energy efficient than alternatives from our competitors.

• Modular DC power system enables low initial investment with future expansion potential

• -48V up to 1,600A (87KW) or +24V up to 1,600A (43KW)

• DC Power Plant with 24V and 48V DC dual voltage flexibility

• High-availability wireless telecom applications

• Telecom service providers and OEMs

• Efficiency approaching 97%

Infinity D™ Power SystemDual Voltage, Modular Power System

Infinity D Product Line Brochure © 2010 Lineage Power. All rights reserved.11/10

Infinity Rectifiers and Converters

Applications

Key Features

Specifications

• Compact - 1RU form factor providing high power density (24 W/in3)

• Dual Voltage compatibility – the unique connector pin designation allows the rectifier to be used in a “universal” power shelf, alongside rectifiers or DC/DC converters with different output voltages.

• Plug and Play – installation of the rectifier in a shelf connected to a compatible system controller initializes all set up parameters automatically. No adjustments are needed.

• Extended service life – parallel operation with automatic load sharing ensures that parallel units are not unduly stressed even when a unit fails or is removed.

• Monitoring / control – the built in microprocessor controls and monitors all critical rectifier functions and communicates with the system controller using the built in Galaxy Protocol serial interface.

• Fail safe performance – hot insertion capabilities allow for rectifier replacement without system shutdown; soft start and inrush current protection prevent nuisance tripping of upstream breakers.

• Telecommunications networks

• Digital subscriber line (DSL)

• Indoor/outdoor wireless

• Routers/switches

• Fiber in the loop

• Transmission

• Data networks

• PBX

• Extended temperature range

• Redundant fan cooling

• Front panel LED indicators

• 1U height, hi power density

• 220/110V AC input

• Digital load sharing

• Hot pluggable

• RoHS compliant

Input NE100AC24 NE050AC48 NE030DC48 NE075DC24

Voltage Range - High-Line - Low-Line

175-275Vac 85-140Vac

175-275Vac-

21-30Vdc--

42-60Vdc--

Input Current 14.9A @208Vac12.9A @240Vac

14.5A @208Vac12.6A @240Vac

63A @27Vdc81A @21Vdc

41A @54.5Vdc54A @42Vdc

Input Frequency 45 – 66Hz 45 – 66Hz - -

Power Factor 0.98 at>50% load 0.98 at>50% load - -

Efficiency 92% 93% - -

Total Harmonic Distortion 5% at full load 5% at full load - -

Output

Voltage Adjust Range 21-29Vdc 42-58Vdc 46-57Vdc 23-28Vdc

Voltage Nominal 27.25V 54.5V 52.0V 27.2V

Regulation(with controller) ±0.5% ±0.5% ±0.5% ±0.5%

Ripple 100mV rms 100mV rms 100mV rms 100mV rms

Psophometric Noise 2 mV 2 mV 2 mV 2 mV

Output Current - High-Line - Low-Line

100A @27.25V44A @27.25V

50A @54.5V-

30A @52.0V--

75A @27.2V--

Heat Dissipation @ max out 237W / 808 BTU/hr 205W / 699 BTU/hr 154W / 525 BTU/hr 202W / 689 BTU/hr

© 2010 Lineage Power. All rights reserved.11/10 Infinity D Product Line Brochure

TECHNICAL SPECIFICATIONS – POWER MODULES


Outline Drawing

Environmental

Operating Temperature -40°C to +75°C (-40 to 167 °F)

Storage Temperature -40°C to +85°C (-40 to 185 °F)

Power De-Rating 2% per ºC from +65 ºC to +75 ºC

Relative Humidity 95% max, non-condensing

Altitude 4,000M max

Mechanical

Length (in. /mm) 13.85 / 351.8

Width (in. /mm) 5.25 / 132.8

Height (in. /mm) 1.70 / 43.2

Weight (lb / Kg) 5.2 / 2.4

Safety and Standards Compliance

NEBs Evaluated by independent NRTL test lab to Telcordia GR63 and GR1089-CORE, Issue 4

Safety CE mark to Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/E

UL 609501-1 Recognized

CSA C22.2 No. 60950-1-03 Certified

RoHS Compliant to RoHS EU Directive 2002/95/EC

EMC FCC and EN 55022, Class A; FCC, Class A

ESD EN61000-4-2, Level 4

TECHNICAL SPECIFICATIONS – POWER MODULES

Pulsar Plus Controller

Applications

Key Features

The Pulsar Plus family of controllers provides system monitoring and control features for Infinity, CP, and other power systems. These controllers monitor and control system components including rectifiers, converters, and distribution modules via a multi-drop RS485 digital communications bus. System status, parameters, settings, and alarm thresholds can be viewed and configured from the controller’s front panel display. Assignment and configuration of alarm inputs and output relays can be performed from a laptop computer connected to a local RS-232 or Ethernet port, or by remote access is through a network connection

to the World Wide Web (internet) or your enterprise network (intranet). An optional modem is also available.

This controller utilizes standard network management protocols allowing for advanced network supervision. Lineage Power Galaxy Manager™ software is the centralized visibility and control component of a comprehensive power management system designed to meet engineering, operations and maintenance needs. The Galaxy Manager client-server architecture enables remote access to system controllers across the power network.

• Telecommunications networks

• Digital subscriber line (DSL)

• Indoor/outdoor wireless

• Routers/switches

• Fiber in the loop

• Transmission

• Data networks

• PBX

Remote Access and Features• Integrated 10/100Base-T Ethernet

Network - TCP/IP - SNMP V2c for management - SMTP for email - Telnet for command line interface - DHCP for plug-n-play - FTP for rapid backup and upgrades - HTTP for standard web pages and browsers - Compatible with Galaxy Manager and other management packages - Shielded RJ-45 interface referenced to chassis ground

• Password protected security levels: User, Super-User, Administrator for all access

• Ground-referenced RS232 system port • ANSI T1.317 command-line interface• Modem access support

- Remote via external modem - Callback security

• EasyView2, Windows-based GUI software for local terminal or Modem access

Standard System Features• Monitor and control of more than 40

connected devices - Robust RS485 system bus

• Standard and user defined alarms - Alarm test - Assignable alarm severity: Critical, Major, Minor, Warning, and record-only - 10 alarm relays (7 user assigned)

• Rectifier management features - Automatic rectifier restart - Active Rectifier Management ARM (energy efficiency) - Remote rectifier (on/off) - Reserve Operation - Automatic rectifier sequence control - N + X redundancy check

• Multiple Low Voltage Load and Low Voltage Battery Disconnect thresholds

• Configuration, statistics, and history - All stored in non-volatile memory - Remote/local backup and restore of configuration data

• Industry standard defaults - Customer specific configurations available

• Remote/ local software upgrade• Basic, busy hour, and trend statistics• Detailed event history • User defined events and derived

channels

Standard Battery Management Features• Float/boost mode control

- Manual boost - Manual timed boost locally, T1.317, and remotely initiated - Auto boost terminated by time or current

• Battery discharge testing - Manual (local/remote) - Periodic - Plant Battery Test (PBT) input driven - Configurable threshold or 20% algorithm - Graphical discharge data - Rectifiers on-line during test

• Slope thermal compensation - High temperature - Low temperature - Step temperature - STC Enable/Disable, low temperature Enable/Disable - Configurable mV/°C slopes

• State of charge indication• High temperature disconnect setting• Reserve-time prediction• Recharge current limit• Emergency Power-Off input


TECHNICAL SPECIFICATIONS - CONTROLLER


Integrated Monitoring Inputs/Outputs• System plant voltage (accuracy ±0.5%, resolution 0.01V)

• One system shunt (accuracy ± 0.5% full scale, resolution 1A) - Battery or load - Mounted in the return side of DC bus

• Up to 15 binary inputs - Six inputs close/open to battery - 9 input close/open to return - User assignable

• Up to 7 user assignable Form-C output alarms (50VDC @.3A)

• 1-Wire™ bus devices - Up to 16 temperature probes (QS873) - Up to 6 mid-string monitors (ES771)

Galaxy Manager Compatible• Centralized web server and database with multiple user access

to live or managed data with drill down to problem details

• Monitor and control of more than 40 connected devices

• Management information from polling or alarms received from alarm traps from multiple sites are available on one screen via the inter/intranet

• Trend user selected data over time

• Automatic or manual report generation

• Standard engineering tools like reserve time calculators and cable voltage drop analyzer

General

Operating Voltage ±24 Vdc, ±48 Vdc (Range: ±18 to ±60 Vdc)

Input Power Less than 7W

Operating Temperature Range -40°C to +75°C (-40 to 167 °F)

Operating Relative Humidity 0 - 95% (non-condensing)

Storage Temperature Range -40°C to +85°C (-40 to 185 °F)

Physical Specifications Sizes vary by packaging option

Display 8-line by 40-character with alarm context sensitive backlit LCD

EMC FCC/EN55022 Class A, CISPR22 Level A

Agency Certifications

Electrostatic Discharge EN 61000-4-2 level 4

Radiated Emissions FCC Part 15, Class BEN55022 (CISPR22), Class A

Safety Underwriters Laboratories (UL) Listed per Subject Letter 1801: Power Distribution Center for Communications Equipment, and cUL Certified (CSA 22.2 950): Safety of Information Technology Equipment

RoHS Compliant to RoHS EU Directive 2002/95/EC

TECHNICAL SPECIFICATIONS - CONTROLLER

Dual Voltage, Modular Power System

Features

Infinity-D may be configured as a +24V or -48V single voltage power system or as a “dual voltage” power system that supports rectifiers and converters. The primary voltage is supported by +24V or -48V rectifiers and battery reserve, while secondary voltage is supported by DC/DC converters. The primary voltage capacity is 1,600A at both 24V and 48V. Secondary voltage capacity is up to 300A per system expansion module.

Infinity-D systems may be equipped in 19”, 23” or 26” wide 7ft frameworks, a half height frame for mounting on battery stands, or supplied frameless for field install applications including outside cabinets.

• Infinity Rectifiers for +24V and -48V applications.

• Modular architecture for easy growth and low cost

• DC/DC converter support for dual voltage systems

• DC distribution in each system module for efficient scalability

• Temperature hardened harsh environments. (-40°C to +75°C)

• Compact size: 8” (203mm) high, 16.9” (429mm) deep.

• Adjustable frame mounting for 19”, 23” and 26” applications

• Battery panel for battery connection and LVBD option.

• Plug-N-Play Pulsar Plus controller with Web based interface for local and remote (CO-LAN) access.

• Distribution options include 3A-400A bullet style circuit breakers and GMT fuses


ORDERING INFORMATION – INFINITY D POWER SYSTEM

Ordering Information – Infinity D Power System


Step 1: Select the Base Power System


-48V Primary voltage systems

Output Lineage Ordering Code Model Frame Picture

-48VCC109146206 -48V, 400A Infinity D System with 2 power shelves, each

shelf is equipped with 4 rectifier slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus controller with Ethernet communications. Suitable for frame or cabinet mounting (not included). Also includes 2 thermal probes, one mid-string voltage monitor and alarm cables.

No Frame

400A H2007001 G003, G020D, G021D, G202C, G801 System Width 23”

-48VCC109146214 -48V, 800A Infinity D System with 4 power shelves, each

shelf is equipped with 4 rectifier slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus controller with Ethernet communications. Mounted in a 7ft relay rack frame. Also includes 2 thermal probes, one mid-string voltage monitor and alarm cables.

7ft x 23”

800A H2007001 G005, G020D(3), G021D, G202C, G801(3) System Width 23”

-48V Primary voltage systems with +24V converters

Output Lineage Ordering Code Model Frame Picture

CC109146222 -48V, 400A Infinity D System with 3 power shelves, 2 shelves are equipped with 4 rectifier slots and 10 bullet breaker positions, third shelf is equipped with 4 converter slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus controller with Ethernet communications. Suitable for frame or cabinet mounting (not included). Also includes 2 thermal probes, one mid-string voltage monitor and alarm cables.

No Frame

48V, 400A24V, 300A

H2007001 G003, G020D, G021D, G040C, G202C, G801, G802

System Width 23”

CC109146230 -48V, 800A Infinity D System with 5 power shelves, 4 shelves are equipped with 4 rectifier slots and 10 bullet breaker positions, 5th shelf is equipped with 4 converter slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus system controller with Ethernet communications. Mounted in a 7ft relay rack frame. Also includes 2 thermal probes, one mid-string voltage monitor and alarm cables.

7ft x 23”

48V, 800A24V, 300A

H2007001 G005, G020D(3), G021D, G040C, G202C, G801(3), G802

System Width 23”



+24V Primary voltage systems

Output Ordering Code Model Frame Picture

CC109146073 +24V, 800A Infinity D System with 2 power shelves, each shelf is equipped with 4 rectifier slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

800A H2007001 G003, G010D, G011D, G202C, G801 System Width 23”

CC109146081 +24V, 1600A Infinity D System with 4 power shelves, each shelf is equipped with 4 rectifier slots and 10 bullet breaker positions. Includes 1600A battery connection panel with LVBD contactor. Equipped with Pulsar Plus system controller with Ethernet communications. Mounted in a 7ft relay rack frame

7ft x 23”

1600A H2007001 G005, G010D(3), G011D, G212C, G801(3) System Width 23”

+24V Primary voltage systems with -48V converters


CC109146098 +24V, 800A Infinity D System with 3 power shelves, 2 shelves are equipped with 4 rectifier slots and 10 bullet breaker positions, 3rd shelf is equipped with 4 converter slots and 10 bullet breaker positions. Includes 800A battery connection panel with LVBD contactor. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

24V, 800A48V, 120A

H2007001 G003, G020D, G021D, G040C, G202C, G801, G802

System Width 23”

CC109146107 +24V, 1600A Infinity D System with 5 power shelves, 4 shelves are equipped with 4 rectifier slots and 10 bullet breaker positions, 5th shelf is equipped with 4 converter slots and 10 bullet breaker positions. Includes 1600A battery connection panel with LVBD contactor. Equipped with Pulsar Plus system controller with Ethernet communications. Mounted in a 7ft relay rack frame

7ft x 23”

24V,1600A48V, 120A

H2007001 G005, G010D(3), G011D, G030C, G211C, G801(3), G802

System Width 23”



Stand Alone DC/DC Converter Systems


-48VCC109148714 -48V, 120A Single Shelf, stand alone converter system.

+24V in, -48V out. Infinity D System with equipped with 4 converter slots and 10 bullet breaker positions. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

120A H2007001 G031C System Width 23”

CC109149893 +24V, 300A Single Shelf, stand alone converter system. -48V in, +24V out. Infinity D System with equipped with 4 converter slots and 10 bullet breaker positions. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

300A H2007001 G041C System Width 23”

Stand Alone Single Shelf Rectifier Systems (Cannot be expanded)


-48VCC109151107 -48V, 200A Infinity D System, 1x48V System Module with

integral battery connection and LVBD, 23” width, no frame. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

200A H2007001 G003, G021D, G223 System Width 23”

CC109153648 +24V, 400A Infinity D System, 1x24V System Module with integral battery connection and LVBD, 23" width, no frame. Equipped with Pulsar Plus system controller with Ethernet communications. Suitable for frame or cabinet mounting (not included)

No Frame

400A H2007001 G003, G011D, G223 System Width 23”



Step 2: Select Mounting FrameNote: Small systems above are configured WITHOUT a mounting frame to facilitate use in cabinets or frames. Large systems come pre-mounted in a 7ft (23” wide) relay rack frame. The following frame options are available for the small systems.

-48V Primary voltage systems

CC848828938 7ft high relay rack for mounting 23” wide equipment

848751132 42” high relay rack for mounting 23” wide equipment on a ½ height battery stand or battery stack


System Expansion - Rectifier Shelves

Output Ordering Code Model Picture

CC109146156 Supplemental 24V rectifier shelf with connection kit, for use with 23" system, supports 4 x rectifiers with 10 bullet circuit breaker positions.

400A H2007001 G010D, G801

-48VCC109146164 Supplemental 48V rectifier shelf with connection kit, for use

with 23" system, supports 4 x rectifiers with 10 bullet circuit breaker positions.

200A H2007001 G020D, G801

System Expansion - Converter Shelves

Output Ordering Code Model Picture

CC109145851 Supplemental 48V to 24V converter shelf with connection kit, for use with 23" system, supports 4 x NE075DC24 converters with 10 bullet circuit breaker positions.

300A H2007001 G040C, G802

-48VCC109145843 Supplemental 24V to 48V converter shelf with connection kit,

for use with 23" system, supports 4 x NE030DC48 converters with 10 bullet circuit breaker positions.

120A H2007001 G030C, G802

Step 3: Select any Power System expansion shelves



Rectifiers

Ordering Code Model Photo

CC109138302 95-150Vac input, 24V, 45A output175-275Vac input, 24V, 100A output

100A NE100AC24

CC109124913 175-275Vac input, 48V, 50A output

50A NE050AC48

Alarm Cables

Ordering # Model Photo

CC848817651 50ft Auxiliary input alarm cable for Pulsar Plus Controller

CC848817668 150ft Auxiliary input alarm cable for Pulsar Plus Controller

CC109157442 15ft alarm cable for Pulsar Plus Controller



Converters

Ordering Code Model Photo

CC109112471 21-29 Vdc input, 48V, 30A output

30A NE030DC48

CC109142881 42-58 Vdc input, 24V, 75A output

75A NE075DC24

Step 4: Select Rectifiers and Converters

Step 5: Select Alarm Cables



Step 6: Select Distribution ComponentsNote: Infinity D shelves each support 10 plug-in (bullet style) breakers or fuse modules. To minimize the cost of surplus material, the cable termination adapters are supplied separately. These are listed below and must be selected and ordered to match the breakers to be installed. On the 5 pole, 400A breaker the adapter is supplied attached to the breaker, so it does not have to be ordered separately.

Bullet Style Load Circuit Breakers

Ordering # Amperage CB Positions (Poles) Min Wire Gage Photo

407998137 3 1 10

407998145 5 1 10

407998152 10 1 10

407998160 15 1 10

407998178 16 1 10

407998186 20 1 10

407998194 25 1 10

407998202 30 1 10

408213486 40 1 8

407998210 45 1 8

407998228 50 1 6

407998236 60 1 6

407998244 70 1 2

407998251 80 1 2

407998269 90 1 2

CC848808551 100 2 2

408185353 125 2 2

408185346 150 2 1/0

408564941 200 3 2/0

408573975 225 3 4/0

408535752 250 3 4/0

CC109147063 400 5 2x2/0



Bullet Style Fuse Holder and TPS Fuses

Ordering # Amperage WP-92461 List Min Wire Gage Photo

406700567 3 100 10

406700583 5 101 10

406700591 6 102 10

406700609 10 103 10

406700617 15 104 10

406700625 20 105 10

406700633 25 106 10

406700641 30 107 10

406700658 40 108 10

406700674 50 109 8

406700682 60 110 6

406700690 70 111 6

402328926 0.18 Alarm Fuse

408548944 Bullet Fuse Holder, TFD-101-011-09 (Alarms on Blown Fuse or Fuse Head Removal)

CC408617410 Bullet Fuse Holder, TFD-101-011-10 (Alarms on Blown Fuse Only)

Bullet Style GMT Fuse Holder and GMT Fuses

405006222 0.25A

406976894 0.5A

405673146 1.33A

405181983 2A

406976985 3A

406159061 5A

405725433 7.5A

406159236 10A

406473959 12A

406473959 15A

CC109145983 6-pos GMT Bullet Fuse Holder (Requires 2 bullet postions)

408515823 Fuse Puller



Cable Termination Adapters

Ordering # Description Photo

CC109143814 Single Pole Breaker or Fuse Holder Termination (one is required for each single pole breaker or fuse holder) (For ¼” on 5/8” ctrs Lugs)

CC109143822 Dual Pole Breaker Termination (one is required for each 2-pole breaker) (For 3/8” on 1” ctrs Lugs)

CC109143830 Three Pole Breaker Termination (one is required for each 3-pole breaker) (For 3/8” on 1” ctrs Lugs)

CC848847723 Dual Return Bus adapter – turns two ¼” on 5/8” ctrs positions in to one 3/8” on 1” ctrs 2-hole lug position

CC848850652 Quad Return Bus adapter – turns four ¼” on 5/8” ctrs positions in to two 3/8” on 1” ctrs 2-hole lug position

Terminal Lugs for Bullet Style Breakers and TPS Fuses (1/4” bolt on 5/8” centers)

Ordering # STR Wire GA (Class B) Flex Wire GA (Class I) WP-91412 List Photo

406021626 8 8 75

405347519 6 6 3

405347576 4 4 5

405348202 2 - 54

405347683 - 2 8

Terminal Lugs for Battery and Large Breakers (3/8” bolt on 1” centers)

406338665 2 - -

405348228 1/0 - -

405347236 2/0 1/0 -

406021725 - 2/0 -

405348251 4/0 - -

405347923 - 4/0 -

407890763 350 - -

407890748 - 350 -

406335141 750 - -

407890730 - 750 -



Step 7: Select Battery Monitoring Ordering # Description Photo

CC109142980 QS873A Thermal Probe (A)

CC848817024 10 ft wire set (B: thermal probe to controller)

CC848822560 1 ft wire set (C: thermal probe to thermal probe)

848719803 5 ft wire set (C: thermal probe to thermal probe)

CC848822321 10 ft wire set (C: thermal probe to thermal probe)

108958422 ES771A Battery Voltage Monitor Card

CC848791517 2-1/2 ft wire set (D: ES771A to thermal probe)

CC848797290 6 ft wire set (D: ES771A to thermal probe)

848719829 10 ft wire set (D: ES771A to thermal probe)

CC848791500 4 ft wire set (G: ES771A to ES771A or controller)

848652947 10 ft wire set (G: ES771A to ES771A or controller)

555052-1 In-Line Coupler (for extending item G above)

Temperature/Voltage probes are needed for battery monitoring. They are connected to each battery or battery string to provide slope thermal compensation, temperature alarms and voltage imbalance alarms.

Temperature Measurement

Temperature and Voltage Measurement



Product DocumentationH2007001: Ordering GuideA copy of the appropriate installation manuals below ship with each system.

CC848845223: Infinity D Installation Manual (+24V Rectifier Systems, -48V Converters)

CC848853515: Infinity D Installation Manual (-48V Rectifier Systems, +24V Converters)

CC848864834: Infinity D Single Shelf Power Plant Installation Guide (+24V and -48V Systems)

CC848862433: Infinity D Stand Alone Converter Plant Installation Guide (+24V to -48V System)

Mechanical

Height 8 inches (203mm) – Single shelf only

Width (with mounting ears) 19 inches (483mm) or 23 inches (584mm) or 26 inches (660mm)

Depth 16.6 inches (422mm)

Weight (without rectifiers) 30lbs/13.6kg – Single shelf only

Environmental

Operating Temperature Range -40°C to +75°C (-40 to 167 °F)

Operating Relative Humidity 0 - 95% (non-condensing)

Storage Temperature Range -40°C to +85°C (-40 to 185 °F)

EMC FCC, EN 55022, CISPR22, Level A, conducted and radiated

Immunity FCC and CISPR22 (EN55022) Class A2

Agency Certifications

UL Canada/US UL60950/UL1801

EMI/EMC CISPR class B conducted and radiated

CE CE mark meets 73/23/EEC and 93/68/EEC directives

Shelf Specifications

Additional Information


Notes:

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................

.........................................................................................................................................................................................................................


© 2010 Lineage Power. All rights reserved.

Lineage Power reserves the right to change specifications without notice. Please contact your Lineage representative to confirm current specifications. Please visit www.lineagepower.com/patents for patents and trademark information.

11/10 Infinity D Product Line Brochure

Contact UsFor more information, call Lineage Power toll free at 877-LINEAGE (877-546-3243),

or +1 972 244 9288 and visit us on the Web at lineagepower.com

Management VisibilityGalaxy Manager™ software is the centralized visibility and control component of a comprehensive power management system designed to meet engineering, operations and maintenance needs. The Galaxy Manager client-server architecture enables remote access to system controllers across the power network.

• Dashboard display with one-click access to management information database

• Trend analysis

• Scheduled or on demand reports

• Fault, configuration, asset, and performance management

TrainingLineage Power offers on-site and classroom training options based on certification curriculum. Technical training can be tailored to individual customer needs. Training enables customers and partners to more effectively manage and support the power infrastructure. We have built our training program on practical learning objectives that are relevant to specific technologies or infrastructure design objectives.

Service & SupportLineage Power field service and support personnel are trusted advisors to our customers – always available to answer questions and help with any project, large or small. Our certified professional services team consists of experts in every aspect of power conversion with the resources and experience to handle large turnkey projects along with custom approaches to complex challenges. Proven systems engineering and installation best practices are designed to safely deliver results that exceed our customers’ expectations.

WarrantyLineage Power is committed to providing quality products and solutions. We have developed a comprehensive warranty that protects you and provides a simple way to get your products repaired or replaced as soon as possible.

The Lineage Power Infinity D comes with a 2 year hardware warranty. For full warranty terms and conditions please go to www.lineagepower.com/warranty.


lineage infinity d power supply

Documents