limitless hdmi over ip distribution over ethernet lan · 2016-06-16 · full featured drivers for...
TRANSCRIPT
Think Network. Not Matrix.
USB
2.0 ov
er IP
Null m
odem
on RS232
Stereo
audio
extraction
Locking
HDM
I cables
USB
over
IP
Link USB
button
HDMI® over IP (HD/IP™) from Just Add Power is an Ethernet network-based HD video distribution system that is ideal for integrators delivering large-scale, multi-zone HDTV and video wall projects. Unlike fixed format HDMI matrices, HD/IP™ lets you create a network of HDMI devices that is scalable to the exact size you require, from 1x1 up to 4,000 x 65,000.
How it works
2G+ A/V Pro transmitters & receivers
Every HD/IP™ network, regardless of size or scope, requires three main components towork: a transmitter unit for every source device connected to the HDMI network, a gigabit managed network (made up of gigabit managed ethernet switches) for routing and distribution of HD signals and a receiver unit to decode back in to HDMI at every display location.
Using everyday IP to build a video distribution network, it is possible to scale up or down depending on your requirements. If you need more displays or sources, simplyadd more receivers and transmitters, you are only limited by the number of ports available on your managed gigabit network.
flexibility and additional functionality, with Dolby certification andIP-controlled variable analog audio-out allowing you to down-mix from HDMI Dolby
audio to stereo analog with easy control. The 2G+ A/V Pro transmitter MIC/LINE input lets you add and extract audio for paging, injecting and distributing analog audio.
Instant switching
Video wall enabled
Any-size matrix
POE receiver
HDMI Pass-through on transmitter
USB 2.0 over IP
Integrated stereo extraction
Integrated audio delay module
Interoperable 2G/2G+
Locking HDMI cables
2-way RS232
RS232 on 3.5mm port with null modem
2G+ 2GMix and Match features
2G and 2G+
Stereo Audio Extraction at both the receivers and transmitters with adjustable lip sync delay via software or physical buttons on the base of the unit.
Transmitter HDMI passthrough port for taking video from your source onwards to other devices. The transmitter HDMI passthrough port also facilitates easier implementation of High Quality mode for Video Wall applications.
USB 2.0 over IP allowing keyboards and mice to be attached to the 2G+ receivers and communicate over the network.
Integrated Null Modem making RS232 connections to serial controlled devices even easier.
Locking HDMI cables for mission critical applications
CEC over IP independent processor allowing CEC commands to be sent to displays and sources.
You can mix and match 2G and 2G+ units in a single HDMI network, meaning you cantake advantage of the enhanced feature set of the 2G+ range when you truly need it. 2G+ units have additional features including:
NEW
Limitless HDMI over IP distributionover ethernet LAN
800-666-0996 • [email protected] • www.btx.com
Spec your system: component list.
Receivers (one per display)
2G RX2G+ RX2G PoE RX2G+ PoE RX
VBS-HDMI-208AVBS-HDMI-218A
JustAddSoftware.com
OnControls.com
VBS-HDMI-208POEVBS-HDMI-218POE
Available with PoE capability or standard 5V power supply configurations
Gigabit managed switches (the distribution hub for your HD/IP™ network)
8, 20, 28 & 52 ports + PoE
At the centre of the install, the managed switch allows for the creation of an HDMI over IP distribution network.
Transmitters (one per source)
2G TX2G+TX
2G Rackmount TX2G+ Rackmount TX
VBS-HDMI-408AVBS-HDMI-418A
VBS-HDMI-439AVBS-HDMI-449A
VBS-HDMI-408POEVBS-HDMI-418POE 2G PoE TX2G+ PoE TX
Available as a single input format or a 19” rackmount unit with 3 inputs.
28 & 52 ports + PoE
24 & 48 ports + PoE
Control (via RS232 or IP - all major control systems supported)
Practically any system capable of sending IP or RS232 commands can be used to control the HD/IP distribution network.
2G+ HD-SDI TX VBS-SDI-428A
2G+ HD-SDI PoE TX VBS-HDMI-428POE
2G+ A/V Pro PoE RX VBS-HDMI-218AVP
2G+ 2G
2G+ 2G
Cisco SG500 Stackable Switch Series
Cisco SG300 Switch Series
Cisco SG500X Stackable Switch Series
Fully supported
Fully supported
Fully supported
Limited RX supportNetgear GSM7000 Series
MediaSwitcher 3.0MediaSwitcher allows full control of the Just Add Power HD/IP video matrix from a Macintosh, Windows, or Linux computer.
Limited RX supportPakedge S24/S24P Series
PCMAC
On ControlsOn Controls is a full control and automation system that utilizes the power of your iPad, iPhone, Android, and Kindle devices.
TABLETPHONE
JustAddDrivers.comJust Add DriversFull featured drivers for the major home automation control systems: AMX, Control4, Crestron, Elan g!, Netstreams, RTI, URC
CONTROLSYSTEM
Limitless HDMI distribution from Just Add Power
[email protected] demo kits and pricing contact:
888-390-1750
2G+ A/V Pro PoE TX VBS-HDMI-418AVP
Limitless HDMI over IP distributionover ethernet LAN
800-666-0996 • [email protected] • www.btx.com