limit switches - octopartdatasheet.octopart.com/xcks131h29-telemecanique... · 3/4 te 3 limit...
TRANSCRIPT
3/2 Te
3
Limit switchesDouble insulated, types XCK-P and XCK-T
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals CSA A300, UL A300 Listed, NEMKO FI 10 (4) A-400 V
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class II conforming to IEC 536 and NF C 20-030
Degree of protection IP 65 conforming to IEC 529 ; IP 653 conforming to NF C 20-010
Repeat accuracy 0.1 mm on the tripping points
Cable entry XCK-P : 1 entry, tapped M16 x 1.5. XCK-T : 2 entries, tapped M16 x 1.5For other threaded entries, please consult your Regional customer centre.
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming toNF C 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated withstand impulse voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed XES-P iiiii151 : 0.001 m/minute, XEN-P21iiiii1 : 0.001 m/second
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/3Te
3
1314 22
21
1314 22
21
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Plunger
Metal plunger Steel plunger with Thermoplastic Thermoplasticelastomer boot roller plunger roller lever plunger
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-P110H29 XCK-P111H29 XCK-P102H29 XCK-P121H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-P510H29 XCK-P511H29 XCK-P502H29 XCK-P521H29break before makeslow break (XEN-P2151)
Weight (kg) 0.055 0.055 0.055 0.060
Complementary characteristics
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 0.3 m/s 1 m/s
Mechanical durability 15 million 10 million 15 millionoperating cycles operating cycles operating cycles
Minimum force for tripping 15 N 12 N 6 N
for positive opening 45 N 36 N 18 N
Cable entry 1 entry tapped M16 x 1.5 for ISO cable gland. Clamping capacity : 4 to 8 mm.Function diagramsXCK-P110H29 XCK-P111H29 XCK-P102H29 XCK-P121H29
XCK-P510H29 XCK-P511H29 XCK-P502H29 XCK-P521H29
Contact operation (A) = cam displacementg contact closed (P) = positive opening pointh contact open
DimensionsXCK-Piiiii10H29 XCK-Piiiii11H29 XCK-Piiiii02H29 XCK-Piiiii21H29
(1) 1 cable entry, tapped M16 x 1.5 for ISO cable gland Ø : 2 elongated holes Ø 4.3 x 8.3 on 22 centres, 2 holes Ø 4.3 on 20 centres
30
(1)
93,5
25
5,5
12,5
Ø
30
20/22= =
39
Ø14
204
30
(1)
74,525
12,5
30
(1)
74,525
12,5
30
20/22= =
20
Ø8
Ø4 Ø
30
20/22= =
20
Ø8
4
30
(1)
8525
3,5
12,5
Ø
30
20/22= =
30,5
Ø11
4
6,5(A)
0 mm10,5
11,3(P)21-2213-14
3,1(A)
0 mm5,2
5,6(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
6,5(A)
0 mm3
15,7(P)21-2213-1421-2213-14
3,1(A)21-2213-1421-2213-14
0 mm1,5
7,8(P)1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
3/4 Te
3
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Rotary
Thermoplastic roller lever Variable length thermoplastic roller lever
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-P118H29 XCK-P145H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-P518H29 XCK-P545H29break before makeslow break (XEN-P2151)
Weight (kg) 0.070 0.080
Complementary characteristics
Switch actuation By 30° cam
Maximum actuation speed 1.5 m/s 1.5 m/s
Mechanical durability 10 million operating cycles
Minimum torque for tripping 0.1 N.m
for positive opening 0.25 N.m
Cable entry 1 entry tapped M16 x 1.5 for ISO cable gland. Clamping capacity : 4 to 8 mm.Function diagramsXCK-P118H29 XCK-P145H29 XCK-P518H29 XCK-P545H29
Contact operation (P) = positive opening pointg contact closedh contact open
DimensionsXCK-Piiiii18H29 XCK-Piiiii45H29
(1) 1 cable entry, tapped M16 x 1.5 for ISO cable gland(2) 115 max.(3) 133 max.Ø : 2 elongated holes Ø 4.3 x 8.3 on 22 centres, 2 holesØ 4.3 on 20 centres
1314 22
21
1314 22
21
25°
0 70°12°
60°(P)21-2213-1421-2213-14
44,5
108
25
5,5 24
40
(1)
30
20/22 ==
Ø
53,5
Ø19
35,5
4
43,5
111,
5...1
57,5
25
5,5 30
38
(1)
58...
103
30
20/22 ==
Ø
Ø19
40...
85
4
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°35°
46°(P)21-2213-14
25°
0 70°35°
21-2213-14
3/5Te
3
1314 22
21
1314 22
21
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
6,5(A)
0 mm3
15,7(P)21-2213-1421-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
6,5(A)
0 mm10,5
11,3(P)21-2213-14
3,1(A)21-2213-1421-2213-14
0 mm1,5
7,8(P)
3,1(A)
0 mm5,2
5,6(P)21-2213-14
Limit switchesDouble insulated, CENELEC EN 50047 compatible, type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Plunger
Metal plunger Steel plunger with Thermoplastic Thermoplasticelastomer boot roller plunger roller lever plunger
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-T110H29 XCK-T111H29 XCK-T102H29 XCK-T121H29snap action(XES-P3151)
2-pole 1 N/C + 1 N/O XCK-T510H29 XCK-T511H29 XCK-T502H29 XCK-T521H29break before makeslow break (XEN-P3151)
Weight (kg) 0.065 0.065 0.065 0.070
Complementary characteristics
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 0.3 m/s 1 m/s
Mechanical durability 15 million 10 million 15 millionoperating cycles operating cycles operating cycles
Minimum force for tripping 15 N 12 N 6 N
for positive opening 45 N 36 N 18 N
Cable entry 2 entries tapped M16 x 1.5 for ISO cable gland. Clamping capacity : 4 to 8 mm.(Switch supplied with 1 entry fitted with blanking plug).
Function diagramsXCK-T110H29 XCK-T111H29 XCK-T102H29 XCK-T121H29
XCK-T510H29 XCK-T511H29 XCK-T502H29 XCK-T521H29
Contact operation (A) = cam displacementg contact closed (P) = positive opening pointh contact open
DimensionsXCK-Tiiiii10H29 XCK-Tiiiii11H29 XCK-Tiiiii02H29 XCK-Tiiiii21H29
(1) 2 cable entries, tapped M16 x 1.5 for ISO cable gland Ø : 4 elongated holes Ø 4.3 x 8.3 on 22/42 centres, 4 holes Ø 4.3 on 20/40 ctrs.
30
8025
12,5
5,5
59,5
40/42
20/22
9,5
==
30,5
Ø11
(1) Ø
4
3,5
30
71,525
12,5
59,5
40/42
20/22
9,5
==
(1) Ø
20
Ø8
4
30
61
25
12,5
30
61
25
12,5
9,5
59,5
40/42
20/22 ==
(1) Ø
20
Ø8
4
Ø
59,5
40/42
20/22
9,5
==
39
Ø14
20
(1)
4
3/6 Te
3
1314 22
21
44,5
94,5
5,5 24
40
25
53,535
,5
Ø19
40/42
59,5
20/22
9,5
==
Ø
(1)
413
14 2221
43,5
99...
144
5,5 30
38
25
58...
103
40...
85
Ø19
40/42
59,5
20/22
9,5
==
Ø
(1)
4
Limit switchesDouble insulated, CENELEC EN 50047 compatible, type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Rotary
Thermoplastic roller lever Variable length thermoplastic roller lever
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-T118H29 XCK-T145H29snap action(XES-P3151)
2-pole 1 N/C + 1 N/O XCK-T518H29 XCK-T545H29break before makeslow break (XEN-P3151)
Weight (kg) 0.080 0.090
Complementary characteristics
Switch actuation By 30° cam
Maximum actuation speed 1.5 m/s 1.5 m/s
Mechanical durability 10 million operating cycles
Minimum torque for tripping 0.1 N.m
for positive opening 0.25 N.m
Cable entry 2 entries tapped M16 x 1.5 for ISO cable gland. Clamping capacity 4 to 8 mm.(Switch supplied with 1 entry fitted with blanking plug).
Function diagramsXCK-T118H29 XCK-T145H29 XCK-T518H29 XCK-T545H29
Contact operation (P) = positive opening pointg contact closedh contact open
DimensionsXCK-Tiiiii18H29 XCK-Tiiiii45H29
(1) 2 cable entries, tapped M16 x 1.5 for ISO cable gland (3) 133 max.(2) 115 max. Ø : 4 elongated holes Ø 4.3 x 8.3 on 22/42 centres, 4 holes Ø 4.3 on 20/40 ctrs.
25°
0 70°12°
60°(P)21-2213-1421-2213-14
25°
0 70°35°
46°(P)21-2213-14
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°35°
21-2213-14
3/7Te
3
222113
14XES-P2151
222113
14
Limit switches
Replacement parts for XCK-P and XCK-T limit switches
Replacement contact blocks
Type of contact Scheme For switch Positive Reference Weighttype operation (1) kg
2-pole 1 N/C + 1 N/O XCK-P1iiH29 XES-P2151 0.020snap action
XCK-T1iiH29 XES-P3151 0.015
2-pole 1 N/C + 1 N/O XCK-P5iiH29 XEN-P2151 0.020break before makeslow break
XCK-T5iiH29 XEN-P3151 0.015
(1) : N/C contact with positive opening operation.
XES-P3151
XEN-P2151
XEN-P3151
3/8 Te
3
Limit switchesMetal, types XCK-M
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals CSA A300, UL A300 Listed, NEMKO FI 10 (4) A-400 V, BV, USSR
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class I conforming to IEC 536 and NF C 20-030
Degree of protection IP 66 conforming to IEC 529 ; IP 665 conforming to NF C 20-010
Repeat accuracy 0.05 mm on the tripping points
Cable entry 3 entries, tapped M20 x 1.5For other threaded entries, please consult your Regional customer centre.
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming toNF C 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated withstand impulse voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed XES-P2151 : 0.001 m/minute, XEN-P2151 : 0.001 m/second
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/9Te
3
1314 22
21
1314 22
21
1,8
0 5,5mm0,9
4,5(P)21-2213-1421-2213-14
1,8
0 5,5mm3
3,2(P)21-2213-14
3,1(A)
0 mm1,5
7,8(P)21-2213-1421-2213-14
3,1(A)
0 mm5,2
5,6(P)21-2213-14
4,6(A)
0 mm2,2
11,1(P)21-2213-1421-2213-14
4,6(A)
0 7,6 mm
8(P)21-2213-14
26°
0 70°11°
58°(P)21-2213-1421-2213-14
26°
0 36° 70°
42°(P)21-2213-14
Ø19
34,5
60,5
41
64==
Ø
5,5
22 15
119
30
34
(1)
8
8
14
112,
5
30(1)
Ø20
54
Ø
41
65
11,5
Ø
Ø12
48,5
41
64==
4
14
108
30
(1)
Ø10
41
64
30
Ø
==
88,5
30
14
(1)
Limit switchesMetal, type XCK-MComplete switches with 3 cable entries, tapped M20 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Plunger Rotary
Metal plunger Steel roller plunger Thermoplastic Thermoplasticroller lever plunger roller lever
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-M110H29 XCK-M102H29 XCK-M121H29 XCK-M115H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-M510H29 XCK-M502H29 XCK-M521H29 XCK-M515H29break before makeslow break (XEN-P2151)
Weight (kg) 0.250 0.255 0.300 0.280
Complementary characteristics
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 1.5 m/s
Mechanical durability 20 million operating cycles 15 millionoperating cycles
Minimum force for tripping 15 N 12 N 8 N 0.1 N.mor torque
for positive opening 45 N 36 N 24 N 0.25 N.m
Cable entry 3 entries tapped M20 x 1.5 for ISO cable gland. Clamping capacity : 7 to 13 mm.(Switch supplied with 2 entries fitted with blanking plugs).
Function diagramsXCK-M110H29 XCK-M102H29 XCK-M121H29 XCK-M115H29
XCK-M510H29 XCK-M502H29 XCK-M521H29 XCK-M515H29
Contact operationg contact closed (A) = cam displacementh contact open (P) = positive opening point
DimensionsXCK-Miiiii10H29 XCK-Miiiii02H29 XCK-Miiiii21H29 XCK-Miiiii15H29
(1) 3 cable entries, tapped M20 x 1.5 for ISO cable gland (2) 2 x Ø 4 H 11, depth 10 Ø : 2 elongated holes Ø 5.2 x 6.2
3/10 Te
3
Limit switchesMetal, compact, type XCM
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, NF C 63-145 Class Y2, VDE 0660-200, UL 508,to standards CSA C22-2 n° 14
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals Special version : XCM-A : CSA A150, and UL Recognized B300
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class I conforming to IEC 536 and NF C 20-030
Degree of protection IP 67 conforming to IEC 529 ; IP 675 conforming to NF C 20-010
Repeat accuracy 0.05 mm on the tripping points
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; B300 (Ue = 240 V, Ie = 1.5 A)aaaaa DC-13 ; R300 (Ue = 250 V, Ie = 0.1 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-5-1 and VDE 0110, group C conforming toNFC 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated impulse withstand voltage U imp = 4 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 6 A cartridge fuse type gG (gl)
Cabling Pre-cabled, 5 x 0.75 mm2
Minimum actuation speed 0.002 m/minute
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/11Te
3
Limit switchesMetal, compact, type XCMComplete switches, pre-cabled
References, characteristics, function diagrams, dimensions
Type of operating head Plunger Rotary Plunger
Metal Steel plunger Steel roller Thermo- Metal Metal plunger Steel rollerplunger with elastomer plunger plastic plunger with elastomer plunger
boot roller lever boot
References
Single-pole 1 C/O Fixing by the body Fixing by the headsnap action (1)
XCM-A110 XCM-A111 XCM-A102 XCM-A115 XCM-F110 XCM-F111 XCM-F102
Weight (kg) 0.240 0.240 0.245 0.245 0.260 0.260 0.265
Complementary characteristics
Switch actuation On end By 30° cam On end By 30° cam
Maximum actuation speed 0.5 m/s 0.1 m/s 1.5 m/s 0.5 m/s 0.1 m/s
Mechanical durability 10 million operating cycles
Minimum force for tripping 7.5 N 5 N 0.05 N.m 7.5 N 4.5 Nor torque
for positive opening 37.5 N 25 N 0.15 N.m 37.5 N 22 N
Cabling PVC cable, 5 x 0.75 mm2, length 1 metre.For other cable lengths and special cables, please consult your Regional customer centre.
(1) Also available with gold flashed contacts, please consult your Regional customer centre.Function diagramsXCM-A110 XCM-A111 XCM-A102 XCM-A115 XCM-F110, XCM-F111 XCM-F102
Contact operation : g contact closed, h contact open (A) = cam displacement (P) = positive opening point
DimensionsXCM-A110 XCM-A111 XCM-A102
XCM-A115 XCM-F110 XCM-F111 XCM-F102
Ø : 2 fixing holes Ø 4.3, counterbored Ø 8.2 x 4 mm deep. G : Fixing by upper part of the body : 2 tapped holes M3, on 18 mm centres Ø 12.5 panel cut-out for passage of operating head. Maximum panel thickness : 5 mm.(1) Pre-cabled, Ø 8 x 1 m length. (2) XCM-A11i. E : 8 mm max., panel cut-out Ø 12.5 mm. F : 8 mm max., panel cut-out Ø 16.5 mm.
BK
-WH
B
K
BN
BU
GN YE
2,6(A)
0 mm0,9
BK-BKBN-BUBK-BKBN-BU
1,5
0 5mm0,5
BK-BKBN-BUBK-BKBN-BU
20°
0 70°9°
BK-BKBN-BUBK-BKBN-BU
2,6(A)BK-BKBN-BUBK-BKBN-BU
0 mm0,9
1,5
0 5mm0,5
BK-BKBN-BUBK-BKBN-BU
1,5
0 5mm0,5
BK-BKBN-BUBK-BKBN-BU
30
40
20±0,1 (1)
Ø14
52
33
Ø
16
30
49
92
5,5
24(2)
16 30
51(1)
23,7
16
74,7
Ø8
E
M12x1
30
51(1)
37
Ø16
16
86
Ø8
F
M6x1
30
51(1)
35,4
Ø10,6
16
86,4
4
E
M12x1
16
49 59,8
Ø8
30
19,8
Ø12
G
40
Ø
(1)20±0,1
30
29,8
(1)
40
Ø
20±0,1
G
16
49
69,8
Ø8
20±0,1
30
4030
(1)
Ø
Ø12 G
16
49
70
4
3/12 Te
3
Limit switchesDouble insulated, conforming to CENELEC EN 50041, type XCK-S
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals Standard version : NEMKO FI 10 (4) A-400 V
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class II conforming to IEC 536 and NF C 20-030
Degree of protection IP 65 conforming to IEC 529 ; IP 653 conforming to NF C 20-010
Repeat accuracy 0.05 mm on the tripping points
Cable entry 1 entry, tapped M20 x 1.5For other threaded entries, please consult your Regional customer centre.
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming toNF C 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated withstand impulse voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed XES-P2151 : 0.001 m/minute, XEN-P2151 : 0.001 m/second
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/13Te
3
Limit switchesDouble insulated, conforming to CENELEC EN 50041, type XCK-SComplete switches with 1 cable entry, tapped M20 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Plunger Rotary
Metal plunger Steel roller plunger Thermoplastic Variable length elastomerroller lever roller lever
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-S101H29 XCK-S102H29 XCK-S131H29 XCK-S149H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-S501H29 XCK-S502H29 XCK-S531H29 XCK-S549H29break before makeslow break (XEN-P2151)
Weight (kg) 0.095 0.105 0.145 0.155
Complementary characteristics
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 1.5 m/s
Mechanical durability 25 million 15 million 20 millionoperating cycles operating cycles operating cycles
Minimum force for tripping 15 N 12 N 0.15 N.m
for positive opening 45 N 36 N 0.3 N.m
Cable entry 1 entry tapped M20 x 1.5 for ISO cable gland. Clamping capacity : 7 to 13 mm.Function diagramsXCK-S101H29 XCK-S102H29 XCK-S131H29 XCK-S149H29
XCK-S501H29 XCK-S502H29 XCK-S531H29 XCK-S549H29
Contact operation (A) = cam displacementg contact closed (P) = positive opening pointh contact open
DimensionsXCK-Siiiii01H29 XCK-Siiiii02H29 XCK-Siiiii31H29 XCK-Siiiii49H29
(1) 1 cable entry, tapped 20 mm ISO Ø : 2 elongated holes Ø 5.3 x 7.3
36
29,5
103
(1)
16
2xØ5,3
40
30= =
6036
,5
Ø10
Ø
116
16
4
36
29,5
(1)
Ø
6049
,5
Ø12
2xØ5,3
40
30= =
132,
5...1
87,5
58
10
57
29,5
(1)
40
30= =
6067
...12
1,5
45...
99,5
Ø50
Ø
2xØ5,3
60
29,5
129
55
6 39
(1)
40
30= =
6063
41
Ø22
2xØ5,3
Ø
1314 22
21
1314 22
21
1,8
0 5,5mm0,9
4,5(P)21-2213-1421-2213-14
3,1(A)
0 mm1,5
7,8(P)21-2213-1421-2213-14
23°
0 80°11°
58°(P)21-2213-1421-2213-14
23°
0 80°11°
21-2213-1421-2213-14
1,8
0 5,5mm3
3,2(P)21-2213-14
3,1(A)
0 mm5,2
5,6(P)21-2213-14
23°
0 80°33°
42°(P)21-2213-14
23°
0 80°33°
21-2213-14
3/14 Te
3
Limit switchesMetal, conforming to CENELEC EN 50041, type XCK-J
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals CSA A300, UL A300 Listed, NEMKO FI 10 (4) A-400 V, GL, BV, USSR
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °CSpecial sub-assemblies available for extreme operating temperatures (- 40 °C and + 120 °C). Pleaseconsult your Regional Sales Office.
Electric shock protection Class I conforming to IEC 536 and NF C 20-030
Degree of protection IP 66 conforming to IEC 529 ; IP 667 conforming to NF C 20-010
Repeat accuracy 0.01 mm on the tripping points
Cable entry 1 entry, tapped M20 x 1.5For other threaded entries, please consult your Regional customer centre.
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming toNF C 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated impulse withstand voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed XES-P2151 : 0.001 m/minute, XEN-P2151 : 0.001 m/second
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/15Te
3
1314 22
21
1314 22
21
221-2213-1421-2213-14
0
4,7(P)
0,96mm
3,2(A)
0 mm1,5
8,1(P)21-2213-1421-2213-14
23°
0 90°11°
58°(P)21-2213-1421-2213-14
23°
0 90°11°
58°(P)21-2213-1421-2213-14
2
0 6mm3,2
3,4(P)21-2213-14
3,2(A)
0 mm5,3
5,9(P)21-2213-14
23°
0 90°33°
40°(P)21-2213-14
23°
0 90°33°
40°(P)21-2213-14
33,5
17
44
107
(1)
3760
30
40
==
2xØ5,3
Ø
Ø10
5060
30
40
==
2xØ5,3
Ø
Ø12
33,5
17
44
120
(1)
5
62…
107
60
30
40
==
2xØ5,3
Ø
Ø19
40…
85
33,5
52
60
5,5
132…
177
(1)
44
6360
30
40
==
2xØ5,3
Ø
Ø22
41
33,5
57
62
5
133
(1)
41
(switches supplied for actuationfrom left AND right)
Limit switchesMetal, conforming to CENELEC EN 50041, type XCK-JComplete switches, fixed body1 cable entry, tapped M20 x 1.5
References, characteristics, function diagrams, dimensions
Type of operating head Plunger Rotary
Metal plunger Steel roller plunger Thermoplastic Variable length thermo-roller lever plastic roller lever
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-J161H29 XCK-J167H29 XCK-J10511H29 XCK-J10541H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-J561H29 XCK-J567H29 XCK-J50511H29 XCK-J50541H29break before makeslow break (XEN-P2151)
Weight (kg) 0.430 0.455 0.480 0.485
Complementary characteristics
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 1 m/s 1.5 m/s
Mechanical durability 30 million 25 million 30 millionoperating cycles operating cycles operating cycles
Minimum force for tripping 20 N 16 N 0.25 N.mor torque
for positive opening 50 N 40 N 0.50 N.m
Cable entry 1 entry tapped M20 x 1.5 for ISO cable gland. Clamping capacity : 7 to 13 mm.Function diagramsXCK-J161H29 XCK-J167H29 XCK-J10511H29 XCK-J10541H29
XCK-J561H29 XCK-J567H29 XCK-J50511H29 XCK-J50541H29
Contact operation (A) = cam displacementg contact closed, h contact open (P) = positive opening point
DimensionsXCK-Jiiiii61H29 XCK-Jiiiii67H29 XCK-Jiiiii0511H29 XCK-Jiiiii0541H29
(1) 1 cable entry, tapped M20 x 1.5 for ISO cable gland Ø : 2 elongated holes Ø 5.3 x 7.3
3/16 Te
3
Limit switchesMetal, type XC2-J
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals Standard version : DEMKO, NEMKO, CSA 300 V a HD, c 60 WSpecial version : UL 250 V c HD Listed, CSA 300 V c HD, 60 W with 1/2" NPT threaded cable entry
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class I conforming to IEC 536 and NF C 20-030
Degree of protection IP 65 conforming to IEC 529 ; IP 657 conforming to NF C 20-010
Repeat accuracy 0.01 mm on the tripping points
Cable entry 1 entry, incorporating cable gland. Clamping capacity : 6 to 13.5 mm
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage 500 V conforming to IEC 947-5-1, group C conforming to NF C 20-040300 V conforming to CSA C22-2 n° 14
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed 0.001 m/minute
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/17Te
3
121113
14
XCK-Z01 121113
14
Limit switchesMetal, type XC2-JComplete switches, fixed body, 1 cable entry incorporating cable gland
References, characteristics, function diagrams, dimensions
Type of operating head Plunger Rotary
Metal plunger Steel roller plunger Thermoplastic Variable length thermoplasticroller lever roller lever
References
Actuation from left AND rightSingle-pole 1 C/O XC2-JC161H29 XC2-JC162H29 XC2-JC10111H29 XC2-JC10131H29snap action Actuation from left OR right(XCK-Z01) XC2-JC10511H29 XC2-JC10531H29
Weight (kg) 0.555 0.560 0.605 0.620
Complementary characteristics
Switch actuation On end By 30° cam By 30° cam
Maximum actuation speed 0.5 m/s 1.5 m/s
Mechanical durability 30 million 25 million 30 millionoperating cycles operating cycles operating cycles
Minimum force or torque for tripping 18 N XC2-JC101ii H29: 0.30 N.m ; XC2-JC105iiH29 : 0.20 N.m
Cable entry 1 tapped entry incorporating metal cable gland. Clamping capacity : 6 to 13.5 mm.Function diagramsXC2-JC161H29 XC2-JC162H29 XC2-JC10111H29, XC2-JC10511H29 XC2-JC10131H29, XC2-JC10531H29
Contact operation (A) = cam displacementg contact closed, h contact open (P) = positive opening point
DimensionsXC2-JC161H29 XC2-JC162H29 XC2-JC10111H29, XC2-JC10511H29 XC2-JC10131H29, XC2-JC10531H29
(1) Fixing from the rear : by 2 M5 screwsDepth of thread : 10 mm
Ø : Fixing from the front via 2 holes Ø 5.5 Cable gland incorporated (all XC2-JC models)
Replacement contact block
Type Scheme Reference Weightkg
Single-pole 1 C/O XCK-Z01 0.050snap action
1,4
0 5mm0,5
11-1213-1411-1213-14
2,4 (A)
0 mm0,9
11-1213-1411-1213-14
12°11-1213-1411-1213-14
0 75°6°
12°
0 75°6°
11-1213-1411-1213-14
6047
Ø12
40
29= =
Ø
(1)
121
41
24
19,5
24
65
143.
..183
5
39…71
40
29= =
Ø
(1)
6069
...10
9
46...
86
Ø22
24
65
141
5
41…39
40
29= =
67
44
Ø 22
Ø
(1)
606059
Ø12
40
29= =
Ø
(1)133
19,5
4
41
24
3/18 Te
3
Limit switchesFor hoisting and mechanical handling, type XCR
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals XCR-A standard version : CSA A300, UL A300 Listed, NEMKO FI 10 (4) A-400 V, USSRXCR-A special version : CSA A300, UL A300 Listed 1/2" NPT
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Electric shock protection Class I conforming to IEC 536 and NF C 20-030
Degree of protection IP 54 conforming to IEC 529 ; IP 545 conforming to NF C 20-010
Cable entry 1 entry, tapped for Pg 13.5 cable gland
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming toNF C 20-040
Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated withstand impulse voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Short-circuit protection 10 A cartridge fuse type gG (gl)
Minimum actuation speed 0.001 m/minute
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
3/19Te
3
Limit switchesFor hoisting and mechanical handling, type XCRComplete switches with 1 cable entry
References, characteristics, function diagrams, dimensions
Type of operating head Rotary with spring return to off position 55° in each direction
6 mm Thermo- Largesquare plastic thermo-metal roller plasticrod lever roller lever
References ( N/C contact with positive opening operation)
Two 2-pole Both contacts XCR-A11 XCR-A12 XCR-A151 N/C + 1 N/O operate insnap action each direction(XES-P2151)
1st contact 2nd contact
Weight (kg) 1.110 1.145 1.155
Complementary characteristics
Maximum actuation speed 1.5 m/s
Mechanical durability 10 million operating cycles
Minimum torque for tripping 0.45 N.m
for positive opening 0.75 N.m
Cable entry 1 tapped entry for Pg 13.5 cable gland conforming to NF C 68-300. Clamping capacity : 9 to 12 mm.Function diagramsXCR-A11 XCR-A12 XCR-A15
DimensionsXCR-A11 XCR-A12 XCR-A15
(1) 1 cable entry, tapped for Pg 13.5 cable gland (2) Rod length : 200 mm (3) Rod + roller length : 160 mm
Replacement contact block assembly
Description Type Reference Weightkg
Contact block (2 contacts) 2-pole 1 N/C + 1 N/O XCR-Z12 0.135with mounting plate snap action
222113
14222113
14
21-2213-1421-2213-14
5° 5°
016°16°55° 55°
30°(P)30°(P)
21-2213-1421-2213-14
21-2213-1421-2213-14
5° 5°
016°16°55° 55°
30°(P)30°(P)
21-2213-1421-2213-14
21-2213-1421-2213-14
5° 5°
016°16°55° 55°
30°(P)30°(P)
21-2213-1421-2213-14
2nd contact
1st contact
2nd contact
1st contact
2nd contact
1st contact
66
53
75
== 32
95
6 (2)
85
85
==
4xØ5,5
75
(1)
18
==
Ø42
72…60
4
9
53
75
== 32
95
Ø30
(3)
85
85
==
4xØ5,5
75
(1)
18
==
Ø42
9
68
53
75
== 32
95
18
85
78
85
==
4xØ5,5
Ø50
75
(1) ==
102
XCR-Z12