lighting
DESCRIPTION
lighting, pannel plusTRANSCRIPT
2012
www.panelplus.co
LIGHTING
I-432
pgs. 432-499
I
Lighting
Bulbs
Channel Lighting
Exhibit Arm
Linear Flexible
Canister Lighting
Downlighting
Light Boxes
Linear Rigid
• Halogen - pg. 497• LED - pgs. 492-495• Xenon - pg. 497
• RGB Channel Letter Modules (LED) - pg. 482• Ultra Bright Channel Letter Modules (LED) - pg. 483
• Klem® Exhibit Light Fixture (Halogen) - pg. 486• Klem® Exhibit Light Fixture (LED) - pg. 486• WAC Display Light (Halogen) - pg. 487
• Incandescent • Flexilight - pgs. 472-473• LED • 24V Non-Neon - pgs. 474-475 • 120V Non-Neon - pgs. 476-478 • Eco Ribbon Flex - pg. 452 • RGB Ribbon Flex - pgs. 450-451 • Ribbon Flex - pgs. 448-449 • Rope Light - pgs. 470-471
• Recessed Downlight Module (LED) - pg.496
• Crystal Light Box (LED) - pg. 484• Front Loading Frame (LED) - pg. 485• Tri-Mod Panel (LED) (24V) - pg. 479-481
• Fluorescent • T4 Slenderlight - pg. 464 • T4 Slimlight (Hera®) - pg. 465 • T 5 “D” Light - pg. 467 • T5 Slimlight (Hera®) - pg. 466• LED • Bar of Light - pgs. 456-457 • Edge of Light - pg. 455 • RGB Bar of Light - pg. 457 • “Stick” (Hera®) - pg. 462 • T5 “D” Light - pg. 468 • T5 Sunray - pgs. 460-461 • T8 Tubelights - pg. 492 • Thin Light - pgs. 458-459 • “Twin” Stick (Hera®) - pg. 463
• Halogen & Incandescent - pg. 445
I-433
Power Supplies &Accessories
Track Lighting
Outdoor Lighting
Luminous Ceiling Panels
Picture/Arc Light
Puck
pg. 499
• Aphrodite (LED) - pg. 453• Apollo (LED) - pg. 453• Arc-It Lights (Halogen & LED) - pg. 488• Stellar Arc Light (Halogen) - pg. 447
• Fluorsent • Sunspot - pg. 438• Halogen • Econoline - pg. 443 • Economy - pg. 446 • Hera® Premium - pg. 442 • Hera® Premium Swivel - pg. 442• LED • Battery Powered Cabinet System - pg. 454 • Infinity - pg. 436 • Little Spot - pg. 441 • Little Spot “Pivot” - pg. 440 • Mighty Light - pg. 437 • Sunspot - pg. 438 • Triple Play - pg. 439 • “Way Far” Better - pgs. 434-435• Xenon • Economy - pg. 446 • Hera® Spotlight - pg. 443 • Metal Pockit - pg. 447
• Hera® - pg. 444• Transformers - pg. 497
• Track Lighting (LED) - pg. 489• WAC Lighting (Halogen) - pgs. 490-491
• Minidisc & Minidisc Scoop Light (LED) - pg. 498
I-434It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:•Superthin&superbright-80/85CRI•Greaterlightoutputthena20Whalogenbulb•Dimmable•Connectable
2-1/8”
3”1/4” Thick Profile!
3” Directinterconnection
ThInnEST SURFACE mOUnTED PUCk - RECESSED lOOk wIThOUT ThE wORk!
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For30,000Hours
COlOR lUmEnSCool White 100Warm White 95120˚
CW=80WW=85
6500K3000K
CoolWhite
WarmWhite
PureWhite
21 LEDCHIPS!
Includes additional 18” extension cable
See pg. 454 for our LED Battery Operated Wafer Kit and pg. 455 for our LED Wafer Track System
PART #COLOR TEMP FINISH
MOUNT OPTION
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CANCONNECT
LED-WF-MC-A CoolWhiteMatteChrome
AdhesiveorScrewMount 21Per
Fixture 1.3W
9fixturesfor1amppowersupplyLED-WF-MC-WW-A WarmWhite
LED-WF-MC-M CoolWhite MagneticMount
27fixturesfor3amppowersupplyLED-WF-MC-WW-M WarmWhite
LED LIGHTINGNEW!
PowerSupply
WAFER PUCK LIGHT ThE “wAY FAR” BETTER lIGhT
12 VSurface
Material: PVC Body w/Prismatic Clear
Polycarbonate Lens
Super BrightLight OutputSuper BrightLight Output
I-435It is recommended that all electrical products be installed by a licensed electrician.
DIMMERS (OPTIONAL) - Dims light 0 to 100%
REMOTE CONTROL DIMMER • Screw mount plate
Supplied with 2 remote controls - Batteries Included.
2.25” Width 1.25” Height4.5”Overall Length
IN LINE ROTARY DIMMER • Adhesive back
12” output wire
18” input wire
1-3/8” Width1” Height 2-5/8” Length
2’ output wire
2’ input wire
DOOR PLUNGER (OPTIONAL)• Light turns on when door is open & off when closed• Optional timer allows light to turn off automatically in 90 seconds
ROCKER SWITCHES (OPTIONAL) 3 AMP ROCKER SWITCH
• Can turn the light on & off1 AMP ROCKER SWITCH• Can turn the light on & off or
set to medium or high
MOTION SENSOR (OPTIONAL)• With motion - stays powered,no motion - off in 90 seconds
POWER SUPPLY (REQUIRED)
A 1 AMP POWER SUPPLY
5’ CORD6’ CORD
ACCESSORIES
B 3 AMP POWER SUPPLY
• Can connect up to 9 lights
2-3/4” x 1-1/8” x 2-1/4”
• Can connect up to 27 lights
3-13/16” x 1-3/4” x 1-1/2”
12” output wire
12” input wire
3’ output wire
3’ input wire
1” Width3/4” Height 2-1/4”Length
1” Width3/4” Height 2-1/4”Length
3’ output wire
3’ input wire
1” Width3/4” Height 2-1/4”Length
See pg. 454 for our LED Battery Operated Wafer Kit and pg. 455 for our LED Wafer Track System
2” Width1” Height 2-3/4”Length
3’ output wire
3’ input wire
90 second timer
LED-WF-DIM-RCLED-INLINE-DIMLED-PLUNT
LED-SWITCH-3ALED-SWITCH-1A LED-MSEN
PART # DESCRIPTION WATTSA LED-WF-TR 12V-1ACompactLEDPowerSupply(Constant Voltage) 12wattsB LED-WF-TR-3A 12V-3ACompactLEDPowerSupply(Constant Voltage) 36watts
NEW!PowerSupply
12 VSurface
Material: PVC Body w/Prismatic Clear
Polycarbonate Lens
Super BrightLight OutputSuper BrightLight Output
WAFER PUCK LIGHT ThE “wAY FAR” BETTER lIGhT
LED LIGHTING
I-436
*Available in Black or White, please specify
It is recommended that all electrical products be installed by a licensed electrician.
120V PLUGNO
TRANSFORMER NEEDED!
CONNECTS UP
TO 100 LIGHTSON ONE RUN!
10’ Power Cordwith On/Off Switch
Infinity Puck Light
with 18” Cable
++ +
+
+ etc. . .
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
CW=75PW= 75WW = 80
COLOR LUMENSCool White 140Pure White 120Warm White 125120˚
4500K 6500K3000-3500K
CoolWhite
WarmWhite
PureWhite
PRODUCT FEATURES:•Connectable•Suppliedwith18’ connectingcable
2.75”
1”
Surface Mount Ring
.75”
Recess Mount
2-3/8”
ACCESSORIESPOWER CORD
(Required)120V LINE DIMMERS (Optional)
FOR USE WITH INCANDESCENT, HALOGEN OR 120 V LED FIXTURES• 200-Wattmaximumcapacity.• 10’powercordwith3’femaleconnectorwith3outlets.
•Threadedstem1-1/2”•Useinwoodworkupto3/4”thick•Availableallblackw/goldknob
•Blackonly.•2”diametertouchplatewithadhesive.•10’wirelead.•5’touchsensorlead.
•300Wcapacity-50ft.range.•Requires9Vbattery(notincluded).•Plug-inlampdimmerwithremotecontrol.•Twofrequencies,A&B.
RECEIVER
TRANSMITTER
DIMMER TOUCH PAD
TRANSFORMER
LOW VOLTAGE ACCENT LIGHTS
PLUG DIMMER WIRE INTO ANY CONVENIENT
WALL OUTLET.
EASY INSTALLATION:• Plugreceiverintoany110-Voltelectricaloutlet.• Pluglampintoreviever.• Installbatteryintotransmitter.
Touchpadcanbemountedtoanynonconductivesurface.Mountunderacorneroftheuppercabinet,setonacountersurfaceorsticktothesideofthecabinet.Thetouchpadcanalsobecutoffandthewiretiedtoanymetallicsurface.Tiethetouchwiretoacabinethinge,doorknoboranysuitableobject.
A ROTARY C 13 STAGE TOUCH
B REMOTE CONTROL
FULLYDIMMABLE
PART #COLOR TEMP * FINISH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CANCONNECT
LED-L1TW-* CoolWhite *MC=MatteChrome*BK=Black*WH=White
7 1.4 100LED-L1TW-*-PW PureWhiteLED-L1TW-*-WW WarmWhite
LED-L1TW-PC*
PART #A LDM-RD-G
B LDM-RCD-ALDM-RCD-B
C LDM-3TD
LED LIGHTING
∞ INFINITY LIGHT120 V
Surface/RecessedMaterial: All Metal
ConstructionSuper BrightLight OutputSuper BrightLight Output
Now UL!IMPROVED!
NEW &
I-437
D
ALL INCLUSIVE KIT
It is recommended that all electrical products be installed by a licensed electrician.
2”
Drill Hole Size
RecessedMount
2.36”
1.97”
Dimensions
1”
3”
2 3/8”Dimensions
1 1/4”
SurfaceMount
SHOWN WITH LED RIBBON-FLEX
PRODUCT FEATURES:• Easy to install• Surface or recess mount rings included
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
COLOR LUMENSCool White 107 x 3Warm White 100 x 330˚
CW=75WW - 80
6500K3200K
CoolWhite
WarmWhite
PureWhite
(A) 3 light set w/79”L wire(B) Power Supply: 3-5/8”L x 1-3/8”W x 1”H w/6’L power cable & 6-1/2”L output wire(C) Screws(D) Junction box - 2”L x 1-1/4”W x 1/2”H
A
B
C
D
PART #COLOR TEMP DESCRIPTION FINISH
# OF LEDCHIPS
TOTAL WATTAGE
LED-M3-CW-WH Cool White3 Light kit
White 1 per fixture (x3)
1W per fixture (x3)
LED-M3-CW-SS Stainless SteelLED-M3-WW-WH Warm White White LED-M3-WW-SS Stainless Steel
LED LIGHTING“mighty light” On The WalletSuper Bright
Light OutputSuper BrightLight Output
20 VSurface/RecessedMaterial: ABS w/
Polycarbonate Lens
I-438
LED
It is recommended that all electrical products be installed by a licensed electrician.
ONLY LED FIXTURE SOCKET IS UL APPROVED.
(3.15”)
Drill Hole Size For Recessed Mounting
AB
CA = 3-1/2” Dia.B = 5/32” HC = 1” H
Weighs only 3.07 oz.!
FLUORESCENT
FIXTURE SHOWN WITH WHITE SURFACE MOUNT RING
RECESSED MOUNT RING
FIXTURE SHOWN WITH SILVER GRAY RECESSED MOUNT RING
SURFACE MOUNT RING
Each light is supplied with 1 Surface Mount Ring & 1
Recessed Mount Ring
120V PLUGNO
TRANSFORMER or BALLAST
NEEDED!
FLUORESCENT FIXTURE SHOWNWITH SILVER GRAY SURFACE MOUNT RING
LED FIXTURE SHOWN WITH WHITE RECESSED MOUNT RING
PRODUCT FEATURES FOR FLUORESCENT & LED:• Energy Efficient• Recess or surface mount• Comes with a 6 ft. attached power cord• Available in white and silver gray
• 9 watt = 40 watt incandescent.• 8,000 hour bulb life
• 25 pcs. 0.1W LED’s per fixture. Each 2.2 Watt fixture is equivalent to one 40 Watt incandescent fixture
LED LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
60˚
Average Rated For30,000Hours
DL=70WW = 75
9000K3500K
DaylightWhite
WarmWhite
PureWhite COLOR LUMENS
Daylight White 250Warm White 290
PART # LIGHT FINISHLSS-CW-WH Daylight White (9000K) WhiteLSS-CW-SL Daylight White (9000K) Silver Gray
LSS-WW-WH Warm White (3500K) WhiteLSS-WW-SL Warm White (3500K) Silver Gray
PART # LIGHT FINISHFSS-CW-WH Cool White (4200K) WhiteFSS-CW-SL Cool White (4200K) Silver Gray
FSS-WW-WH Warm White (2700K) WhiteFSS-WW-SL Warm White (2700K) Silver Gray
FLUORESCENT / LED LIGHTING
“SUNSPOT” LIGHTINGSuper BrightLight OutputSuper BrightLight Output
120 VSurface/Recess
Material: ABS Housing w/Polycarbonate Lens
I-439
ALL INCLUSIVE KIT(A) 3 light set w/3 surface rings & 36”L wire(B) Power Supply: 2-3/4” L x 2” W x 1” H w/6’L power cable & 6’ L output wire(C) Junction box - 3”L x 1-1/4”W x 3/4”H
2-3/4”
3/4”
Surface Mount Ring
.815”
Recess Mount
It is recommended that all electrical products be installed by a licensed electrician.
2-1/2”
Drill Hole Size
High Quality Finish
PRODUCT FEATURES:• Built-in metal reflector maximizes light output• Built-in heat sink• Can be surface or recessed mounted
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
COLOR LUMENSCool White 22880˚
CW=75
6500K
CoolWhite
WarmWhite
PureWhite
A
Power Supply(Constant Current)
B
C
PART #COLOR TEMP DESCRIPTION FINISH
# OF LEDCHIPS
TOTAL WATTAGE
LED-THRK-3-MCCool White 3 Light kit
Matte Chrome 3 Per Fixture 3 x 1W (3W)LED-THRK-3-BK Black
LED-THRK-3-WH White
LED “TRIPLE PLAY”
LED LIGHTING
Power SupplySuper BrightLight OutputSuper BrightLight Output
30 V/DCSurface/Recessed
Material: Diecast Metal
I-440
ALL INCLUSIVE KIT(A) 3 light set w/79” L wire(B) Power Supply: 3” L x 1-3/8” W x 5/8” H w/6’ L power cable & 6’ L output wire(C) Junction box - 2” L x 1-1/4” W x 1/2” D (D) 5 - Circuit bridges
It is recommended that all electrical products be installed by a licensed electrician.
43mm (1.69”)
Drill Hole Size For Recessed Mounting 35mm
(1.378”)
52mm (2.0472”)PIVOTS 35°
Power Supply(Constant Current)
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For20,000Hours
COLOR LUMENSCool White 60Warm White 8050˚
CW=75WW - 80
PRODUCT FEATURES:• Small diameter can accommodate a variety of applications• Pivots 35˚• 6 lights can work off 1 power supply
6500K3600K
CoolWhite
WarmWhite
PureWhite
A
B
CD
PART #COLOR TEMP DESCRIPTION FINISH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CAN CONNECT
LED-EB3-CW-SN Cool White 3 Light kitSatin Nickel 1 Per
fixture
3 x 1W (3W) Accepts up to 6 fixturesLED-EB3-WW-SN Warm White
LED-EB1-CW-SN Cool White Single add on fixture 1W --LED-EB1-WW-SN Warm White
LED LIGHTING
PIVOTING “LITTLE SPOT” Power Supply
3.5 V/DCRecessed
Material: Die CastMetal Housing
Ambient MoodLight Output
I-441
EXCELLENT FOR SHOWCASING
ITEMS
ALL INCLUSIVE KIT(A) 3, 6 or 9 light set w/59-1/2” L wire(B) Power Supply: 2-1/2” L x 1-7/8” W x 1” H w/6’ L power cable & 6’ L output wire(C) Junction box - 3” L x 1-1/4” W x 3/4” D
1-3/4”
1-1/2”
.625
SHOWN WITH DIFFUSERS
Free optional light diffusing filters
included in every kit!
1-1/2”
Drill Hole Size ForRecessed Mounting
Minimum 1/8” board thickness required
Power Supply(Constant Current)
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
COLOR LUMENSCool White 76120˚
CW=75
PRODUCT FEATURES:• Small diameter can accommodate a variety of applications• Diffuser allows user to soften light output
6500K
CoolWhite
WarmWhite
PureWhite
It is recommended that all electrical products be installed by a licensed electrician.
A
B
C
PART #COLOR TEMP DESCRIPTION FINISH
# OF LEDCHIPS
TOTAL WATTAGE
LED-LSLK-3-MCCool White
3 Light kitMatte Chrome 1 Per
Fixture
3 x 1W (3W)LED-LSLK-6-MC 6 Light kit 6 x 1W (6W)LED-LSLK-9-MC 9 Light kit 9 x 1W (9W)
LED LIGHTING
“LITTLE SPOT” LIGHTINGPower Supply
12 VRecessed
Material: Die CastMetal Housing
Ambient MoodLight Output
I-442
•Approximately4,000 hoursbulblife,bulbincluded.Twicethelifeincomparisontootherhalogenlamps.•Attached72"connectingcablewithNV6plug.•Recessedorsurfacemount.•Recessedbyfrictionfit.•Easytore-lampbulbsocketcanberemovedwhenreplacinglamps.•Minimumboardthicknessforrecessedmountingis3/4".•Highlypolishedaluminumreflector.•Frostedtemperedglasslens.
PRODUCT FEATURES:
•Approximately4,000 hoursbulblife,bulbincluded.Twicethelifeincomparisontootherhalogenlamps.•Attached6"connectingleadwith2NV6plug;79"connectingcableincluded.•Recessedmountingonly•Metabolicreflector.•Frostedtemperedglasslens.•Allmetalhousing.•Canbere-lampedfromthetoporbottom.
PRODUCT FEATURES:
RECESSED MOUNTED ONLY
INDIVIDUALPremium Type:Includes:(1)spotlightwith72"connectingcable,(1)10wor20whalogenlamp&frostedlens.
PREMIUM 2 or 3 LIGHT KITSIncludes:2or3spotlightforrecessedorsurfacemounting.Eachsetincludes72"connectingcable,(1)AH-TR-60transformer,(1)terminalblock,screws&instructions.PREMIUM 5 LIGHT KITSSameas2&3excepthas5spotlights&(1)ClassIIAH-TR-120transformer.
RECESSED
SURFACE
THIS FIXTURE IS PERFECTLY ENGINEERED FOR GLASS FRONT
AND GLASS SHELF APPLICATIONS.
Drillholesizeforrecessedmounting.
Bulb. Beamspread.TWICE AS
MUCH LIFE!
Drillholesizeforrecessedmounting.
Bulb. Beamspread. 4"minimumclearanceand13-3/4"backsideclearancerequired.
TWICE AS MUCH LIFE!
It is recommended that all electrical products be installed by a licensed electrician.
Available Finishes: Black • White • Chrome • Brass • Stainless Steel
Hera® spotlights can be
recessed into a pocket hole
without any ventilation on
the back surface
Available Finishes: Black • White • Chrome • Brass • Stainless Steel
PART #
* ADD COLOR (CHOOSE
APPROPRIATE CODE) WATTSPACKAGE
TYPESCOMPATIBLE
TRANSFORMER
ARFS-20-* BK=BlackWH=White
CH=ChromeBR=Brass
SS=StainlessSteel
20 Individual AH-TR-60AH-TR-120
ARFS-20-2* 20 2LightKit IncludedwithKitARFS-20-3* 20 3LightKit IncludedwithKitARFS-20-5* 20 5LightKit IncludedwithKit
PART #
* ADD COLOR (CHOOSE
APPROPRIATE CODE) WATTSPACKAGE
TYPESCOMPATIBLE
TRANSFORMER
AHS-20-* BK=BlackWH=White
CH=ChromeBR=Brass
SS=StainlessSteel
20 Individual AH-TR-60AH-TR-120
AHS-20-2* 20 2LightKit IncludedwithKitAHS-20-3* 20 3LightKit IncludedwithKitAHS-20-5* 20 5LightKit IncludedwithKit
premium puCK LiGHTs
HALOGEN LIGHTING12 V
Surface/Recess
premium sWiVeL puCK LiGHTs12 VRecess
PACKAGE TYPES
I-443
•Approximately2,000 hoursbulblife,bulbincluded.Twicethelifeincomparisontootherhalogenlamps.•Attached79"connectingcablewithNV6plug.•Recessedorsurfacemounting.•Minimumboardthicknessforrecessedmountingis3/4".•Aluminumreflector.•Frostedlens.
PRODUCT FEATURES:
RECESSED
SURFACE
INDIVIDUALEcoline Type:Includes:(1)spotlightwith79"connectingcable,(1)10wor20whalogenlamp&frostedlens.
ECOLINE 2 or 3 LIGHT KITSIncludes:2or3spotlightforrecessedorsurfacemounting.Eachsetincludes79"connectingcable,(1)New & ImprovedEC-TR-60wtransformer,(1)terminalblock,screws&instructions.
•SAVE $$$-Longerbulblife&lowerbulbtemperatures.•Approximately8,000 hoursbulblife,bulbincluded.•Attached72"connectingcablewithNV6plug.•Recessedorsurfacemounted.•Minimumboardthicknessforrecessedmountingis5/8".•Frostedtemperedglasslens.•Aluminumreflector.
PRODUCT FEATURES:
RECESSED
SURFACE
Available Finishes: Black • White • Chrome • Brass • Stainless Steel
NO UV & LOW HEAT!REDUCES DAMGE TO DISPLAYS!
Drillholesizeforrecessedmounting.
Bulb.TWICE AS
MUCH LIFE!
Drillholesizeforrecessedmounting.
Bulb. Beamspread. Minimumclearance.TWICE AS
MUCH LIFE!
It is recommended that all electrical products be installed by a licensed electrician.
Available Finishes: Black • White • Chrome • Brass • Stainless Steel
PART #
* ADD COLOR (CHOOSE
APPROPRIATE CODE) WATTSPACKAGE
TYPESCOMPATIBLE
TRANSFORMEREC-10-*
BK=BlackWH=White
CH=ChromeBR=Brass
ST=StainlessSteel
10 Individual EC-TR-60WEC-20-* 20 Individual EC-TR-60W
EC-10-2* 10 2LightKit Includedw/KitEC-20-2* 20 2LightKit Includedw/KitEC-10-3* 10 3LightKit Includedw/KitEC-20-3* 20 3LightKit Includedw/Kit
PART # COLOR WATTSCOMPATIBLE
TRANSFORMERXN-18-BK Black 18WXenon
AH-TR-60AH-TR-120EC-TR-60W
XN-18-WH White 18WXenonXN-18-SS StainlessSteel 18WXenonXN-18-CH Chrome 18WXenonXN-18-BR Brass 18WXenon
PACKAGE TYPES
eCOLiNe puCK LiGHTs
HALOGEN LIGHTING12 V
Surface/Recess
spOTLiGHTs12 VSurface/Recess
XENON LIGHTING
I-444
•120v/60hzmaximum300w.•Canbeusedwith1-560wtransformer.•Provides4levelsoflineardimming:off,50%,75%,&100%.•Easyinstallation-nowiringnecessary.•Black.
•120v/60hzmaximum300w.•Canbeusedwith1-560wtransformer.•Provideslineardimming:0-100%.•Blackorwhite.
60W Ultra Slim Premium Transformer
120W Class II Premium Transformer*meets UL's strictest class II requirements*
60W Compact Economical Transformer
3.2OZ.
DIMENSIONS
CLEARANCE
DIMENSIONS
CLEARANCE
4.8OZ.
CLEARANCE
DIMENSIONS
3.2OZ.
Connect up to 6 x 20W
lamps!Made in
Germany
Made in Germany
It is recommended that all electrical products be installed by a licensed electrician.
PART # COLORAH-RD-BK Black
AH-RD White
PRODUCT FEATURES:•Only1/2"high!•Electronic.•120V/11.5Veff,10-60VA.•Shortcircuit,overload,overheat protection.•Radiofrequencyinterferencesuppressor.•Voltagecompensationcircuit.•Dimmable.•Softstartformaximumlamplife.•Autore-settechnology-nofuses.•79"longplug-inpowercord.•10"12VconnectorwithNVK6/3plug-in terminal.#AH-TR-60
PRODUCT FEATURES:•Electronic.•120V/11.5Veff,10-60VA.•Shortcircuit,overload,overheat protection.•Radiofrequencyinterference suppressor.•Voltagecompensationcircuit.•Dimmable.•Softstartformaximumlamplife.•Autore-settechnology-nofuses.•79"longplug-inpowercord.•2x10"12VconnectorwithNVK6/3 plug-interminal.#AH-TR-120
PRODUCT FEATURES:•Electronic.•120V/11.5Veff,10-60VA.•Shortcircuit,overload,overheat protection.•Voltagecompensationcircuit.•Dimmable.•Softstartformaximumlamplife.•Autore-settechnology-nofuses.•79"longplug-inpowercord.•12VconnectorwithNVK6/3plug-in terminal.#EC-TR-60W
PART #AH-TD
Dimmers
IDEAL FOR COMMERCIAL APPLICATIONS!
POWER ACCESSORIES
TrANsFOrmers120 VPower Supply Suitable for many applications in the home, office & stores!
120 VDimmer
I-445
FH-1 & FB-1 (Single)• 10' cord
• Roll switch 5' from plug
FH-4 & FB-4 (End)• 2' power cord
FH-2 & FB-2 (Starter)• 10' cord
• Roll switch 5' from plug• 24" extension
FH-3 & FB-3 (Joiner)• 20" extension
3-1/4”
4”
4-1/2”
Spring Mount
Bore 3-3/4” hole to install
3-1/4”
2-7/8”
4-1/2”
Spring Mount
Bore 3-3/4” hole to install
It is recommended that all electrical products be installed by a licensed electrician.
PLEASE NOTE: BULBS ARE COMPLIMENTARY. WE ARE NOT RESPONSIBLE FOR BREAKAGE DURING SHIPPING OR DEFECTS.
Available Finishes for RLF & HSP Series:
Brushed Brass
Polished Chrome
Polished Brass
WhiteBlackBrushed Chrome
PRODUCT FEATURES:• All metal construction.• Spring clip mounting.• 2-7/8" drill hole size.• 24" cord with polarized plug.• Includes halogen 35W/120V GU-10 base lamp.• Dimmable.
RLF SERIES HSP SERIESPRODUCT FEATURES:• All metal construction.• Spring clip mounting.• 2-7/8" drill hole size.• 24" cord with polarized plug.• Includes 40W/R14 120V reflector lamp.
FB-* CANISTER LIGHTSPART # * ADD COLORFB-1* BK=Black
BR=Polished BrassPC=Polished Chrome
FB-2*FB-3*FB-4*(*CHOOSE APPROPRIATE COLOR)
REPLACEMENT BULB 50 watt halogen spot
PAR-20.
FH-* CANISTER LIGHTSPART # * ADD COLORFH-1* BK=Black
BR=Polished BrassCH=Polished Chrome
FH-2*FH-3*FH-4*(*CHOOSE APPROPRIATE COLOR)
REPLACEMENT BULB 40 watt high intensity lamp
MS-BULB.....
PART # COLORHSP-35-BK BlackHSP-35-WH WhiteHSP-35-BC Brushed ChromeHSP-35-BB Brushed Brass
HSP-35-BRS Polished BrassHSP-35-CHR Polished Chrome
LAMPS INCLUDED. FOR REPLACEMENT BULB:
HSP-35-BULB
PART # COLORRLF-580-BK BlackRLF-580-WH WhiteRLF-580-BC Brushed ChromeRLF-580-BB Brushed BrassRLF-580-PB Polished BrassRLF-580-PC Polished Chrome
LAMPS INCLUDED. FOR REPLACEMENT BULB:
RLF-BULB
HALOGEN LIGHTING120 VRecessed
Material: SteelCONNECTABLE CANISTER LIGHT
PLUG-IN SWIVEL RECESSED
I-446It is recommended that all electrical products be installed by a licensed electrician.
KIT INCLUDES:•3 spot lights with 130" connecting cable.•3surfacemountingrings.•1ULlisted60Wtransformer.•Mountingscrews.•Comeswith20Whalogenbulb.
20W20W 20W
110-130V120V 60W TRANSFORMER
STANDARD DIMENSIONS
Approx. 2-1/2”(66mm)
Approx. 3/4”(20mm)
(150mm 6”)
1.1m (3.6’)1.1m (3.6’)1.1m (3.6’)
2.735”
.935
Surface Mount Ring
Recessed Mount
2-1/4”
Drill Hole Size
See pages 326-333, 350-353, 358-361, 366-383 for additional
REV-A-SHELF® products.
Photo compliments of:
Products
Available Finishes: Black • White • Brass • Chrome • Matte Chrome
PRODUCT FEATURES:•Noneedfortransformer.•Canconnectupto9lights(3kits)onasinglerun.•Canberecessedorsurfacemounted(onlyrecessinapplicationswheretopofcabinetisnotenclosed).
KIT INCLUDES:•3fixtures.•2-12"extensioncords.•1-6ft.powercordw/on-lineswitch.•3-20Wxenonbulbs.•3"extensioncordfromeachsideoflight.•Mountingscrews.
Available Finishes: Black • White • Chrome • Nickel
2.65”
.725
Surface Mount Ring
Light Fixture
2.65” .410 1.25
2.15”
PART # COLORCHCL-3BK BlackCHCL-3WH WhiteCHCL-3BR BrassCHCL-3CH ChromeCHCL-3MC MatteChrome
PART # COLORX1TW-3-BK BlackX1TW-3-WH WhiteX1TW-3-CH ChromeX1TW-3-NI Nickel
HE-20W
Lamps Included. ForReplacement Lamps
X1TW-BULB (20 watt)
Lamps Included. ForReplacement Lamps
ECONOMY PUCK LIGHT
HALOGEN LIGHTING12 V
Surface/RecessPowerSupply
XENON LIGHTING
ECONOMY PUCK LIGHT120 VSurface/Recess
I-447
Standard 110V/120V Plug option included.
+
It is recommended that all electrical products be installed by a licensed electrician.
•10Wor20W/12VXenonbulbs.•Lessheat&longerlamplifewhencomparedtohalogen.•Allmetalconstruction.•Recessedorsurfacemount.•Fullydimmable.•Suppliedwith79"longconnectingcable.•Approximatebulblife:5,000hours.
PRODUCT FEATURES:
Drillholesizeforrecessedmounting.
Bulb. Beamspread. Minimumclearance.
SPRING CLIPS FOR EASY INSTALLATION!-STRONG, DURABLE
ALL METAL CONSTRUCTION! MAXI-LIGHT: For transformer & accessories, see page 497
RECESS MOUNT
SURFACE MOUNT
¾"NOTE: SURFACE MOUNT RING SOLD SEPARATELY
Bulb. Beamspread. Minimumclearance.
**-NOT AVAILABLE IN 25" LONG.
•14"or25"longarcwithswivelhead.•AluminumcoatedMR-11bulbeliminatespinkbackspill,nolightemittedupwards.•Includesa12Vx20WxenonMR-11bulb.Bulbliferatedatapproximately4,000hours(35Wsoldseparately).•Suppliedwith79"longconnectingcable.•Fullydimmable.
PRODUCT FEATURES:
HEAD SWIVELS ON A BALL JOINT!
AVAILABLE FINISHES:
CHROMEBRUSHED
NICKELBLACK BRASS
Male/female Connections for Easy installation.
Snap block end Allows for quick
Connections of fixtures 6 x 10W or 3 x 20W.
• Includes radio frequency suppression and will not interfere with cordless phones or FM signals.
EXTENSION CORDSTRANSFORMER
ROCKER SWITCHESTOUCH DIMMERS
• 4 step touch dimmer, LO/MED/HI/OFF. • Transformer or fixture plugs directly into dimmer.
• Black or White.• 1m (3.3 ft.) or 2m (6.6 ft.) lengths available.
CUSTOM LENGTHS & COLORS AVAILABLE. MINIMUMS APPLY. PLEASE INQUIRE.
POCKIT® & STELLAR® ACCESSORIES
CHROME BRUSHED NICKEL
WHITEBLACK
BRASS
AVAILABLE FINISHES:
+ Roll switch Included.
+
+
PART #
*- ADD COLORCHOOSE APPROPRIATE
CODE WATTSPACKAGE
TYPESCOMPATIBLE
TRANSFORMERMAX-10X-*
BK=BlackWH=White
CH=ChromeBR=Brass
BN=BrushedNickel
10W Individual MAX-TR-60WMAX-10X-2* 10W 2LightKit Includedw/KitMAX-10X-3* 10W 3LightKit Includedw/KitMAX-20X-* 20W Individual MAX-TR-60WMAX-20X-2* 20W 2LightKit Includedw/KitMAX-20X-3* 20W 3LightKit Includedw/Kit
MAX-SURFX-* N/A Surface Mount RingSold Separately N/A
MAX-TR-60W
MAX-TD
PART #
*- ADD COLORCHOOSE APPROPRIATE
CODE WATTS LENGTHCOMPATIBLE
TRANSFORMER
STEL-20-14* BK=BlackCH=ChromeBR=Brass**
BN=BrushedNickel
20W 14" MAX-TR-60W
STEL-20-25* 35W 25" MAX-TR-60W
PART # LENGTH COLORMAX-ROC1-BK 1m(3.3ft.) BlackMAX-ROC1-WH 1m(3.3ft.) WhiteMAX-ROC2-BK 2m(6.6ft.) BlackMAX-ROC2-WH 2m(6.6ft.) White
PART # LENGTHMAX-EXT-1 1m(3.3ft.)MAX-EXT-2 2m(6.6ft.)MAX-EXT-3 3m(9.9ft.)
METAL POCKIT® LIGHTXENON LIGHTING
12 VSurface/Recess
STELLAR® ARC LIGHT12 V
I-448It is recommended that all electrical products be installed by a licensed electrician.
1” 6” Cut Increments
3/8” Wide
1/8” Thick
3M™ Double-sided adhesive tape on bottom
Under CabinetLighting
PRODUCT FEATURES:• Dimmable• Field trimmable• Connectable - male connector included• IP65 suitable in damp locations
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
W=75PW=75
WW = 80
4500K 6500K3000K-3500K
CoolWhite
WarmWhite
PureWhite
120˚
COLOR LUMENSPure White (22.5”) 340
Pure White (6’) 1020Pure White (16.5’) 2890Warm White (16.5’) 2745Cool White (16.5’) 2958
After with LED Ribbon Flex
Before usingLED Ribbon Flex
MALE / FEMALE END-TO-END CONNECTORS
3M™ PEEL & STICK
ADHESIVE
100%
CONNECTABLE!
NO SOLDERING
NECESSARY
MAX # CAN
CONNECTPART # * COLOR TEMP DESCRIPTION LENGTH# OF LED
CHIPSTOTAL
WATTAGE
LED-RIBBON-24V-*K W = Cool WhiteWW - Warm WhitePW - Pure White
12” Kit w/power supply 12” 12 2.4
30’LED-RIBBON-24V-* N/A 22.5” 24 4.8LED-RIBBON-24V-*6 N/A 6’ 72 14.4LED-RIBBON-24V-*9 N/A 16.5’ 204 40.8
RIBBON FLEX
LED LIGHTING
Power Supply
24 VLinear
Material: Flexible PVC Cover w/Adh.
Super BrightLight OutputSuper BrightLight Output
I-449
2’ output wire
It is recommended that all electrical products be installed by a licensed electrician.
Input and output lead wires are 6’ long.
LISTED 24V/3A (Constant Voltage)
2.25” Width3.5” Height1.5” Depth
CONNECTING CABLE/EXTENSION CORD (OPTIONAL)
CONNECTORS (OPTIONAL)
POWER SUPPLY (REQUIRED)
DIMMERS (OPTIONAL)
1-3/8” Width1” Height 2-5/8” Length
2’ output wire 2’ input wire
IN LINE ROTARY DIMMER •Adhesiveback
ROTARY DIMMER•Screwmountplate
A B C
2-1/8” Width1-3/8” Height5” Length
CoveLighting
MOUNTING OPTIONS PRODUCT FEATURES:• Install Ribbon Flex with ease! These new channels can be incorporated into a variety of applications.• Optional universal diffuser lens available, fits all 3 mounting channels
Powersupplyconnectstothedimmerinputandthedimmeroutputconnectstothelightfixture.Dimslight0to100%
2’ input wire
3/4”
3/8”
1/4”CASurface Mount
BCorner Mount
CRecessed Mount
B
1/4”5/8” 5/8”
A
3/4”
3/8”
D
PART # DESCRIPTIONLED-RIBBON-CON-W 18” Ribbon-flex connecting cable
LED-RIBBON-CON24-W 24” Ribbon-flex connecting cableLED-RIBBON-CON36-W 36” Ribbon-flex connecting cable
LED-INLINE-DIM
PART # DESCRIPTIONA LED-RIBBON-2W-C 2-Way vertical connectorB LED-RIBBON-3W-C 3-Way connectorC LED-RIBBON-4W-C 4-Way connector
LED-RIBBON-TR-W
PART # DESCRIPTION LENGTH
A LED-RIBBON-ALMT-01 Clear anodized aluminum LED ribbon mounting u-channel w/mounting clips & end caps
4 ft.B LED-RIBBON-ALMT-02 Clear anodized aluminum LED ribbon mounting
triangle w/mounting clips & end caps
C LED-RIBBON-ALMT-03 Clear anodized aluminum LED ribbon mounting winged u-channel w/mounting clips & end caps
D LED-RIBBON-MTLENS PVC frosted diffuser lens for LED ribbon aluminum products
LED-RIBBON-24V-DIM
RIBBON FLEX
LED LIGHTING
Power Supply
24 VLinear
Material: Flexible PVC Cover w/Adh.
Super BrightLight OutputSuper BrightLight Output
NEW!
NEW!
NEW!
I-450
1” 10” Cut Increments
3/8” Wide
1/8” Thick3M™ Double-sided adhesive tape on bottom
A Kaleidoscope of Colors
MALE / FEMALE END-TO-END CONNECTORS
It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:•Fieldtrimmable•Connectable-male connectorincluded•IP65suitableindamp locations•RGBcanbeprogrammed tostrobeormorph
3M™ PEEL & STICK
ADHESIVE
Endless Possibilities
ofColors
100%
CONNECTABLE!
NO SOLDERING
NECESSARY
LIGHTING SPECIFICATIONSBEAM SPREAD LUMINESCENCE
140˚
Average Rated For50,000Hours
COLOR LUMENSRed 22
Green 48Blue 7
7 Solid ColorsRED BLUE PURPLE WHITE
GREEN YELLOW CYAN
PART #COLOR TEMP LENGTH
# OF LEDCHIPS
TOTALWATTAGE
MAX # CANCONNECT
LED-RIBBON-RGB-24VRGB
39” 40 8.8W20’LED-RIBBON-RGB24V6 6.5’ 80 17.6W
LED-RIBBON-RGB-24V9 16.5’ 204 41W
RGB RIBBON FLEX
LED LIGHTING24 VLinear
Material: Flexible PVC Cover w/Adhesive PowerSupply
I-451
• LED RGB Lighting easily concealed.• Application is shown with our Acrylic Blocks.
•Inputandoutputleadwires are6’long.
5”L x 2-1/8”W x 1-3/8”H
< UL LISTED 24V/3A POWER
SUPPLY(Constant Voltage)
ULTIMATE ADVANCED
•Allowsusertheoriginal7colorsandeveryshadein betweenwiththeabilityto PAUSE ateachshade.•Programtochangeatvariablespeedsorremain static.•Capableofgoingasfastasastrobeeffector asslowasaminuteandahalfpercolorchange.
POCKET SIZE
< LEDCONTROLLER
< REMOTE
U LTIMATEL UXURY
Endless Possibilities
ofColors
RGB LED CONTROLLER & REMOTE CONTROL SET (Required)
CONNECTING CABLE/EXTENSION CORD (Optional)
ACCESSORIESPOWER SUPPLY
(Required)
2-1/8”W x 1”H x 4-3/8”L
•Newmodernlook,compactdesign•Programtochangeatvariablespeedorremain static•Capableofgoingasfastasastrobeeffector asslowasaminuteandahalfpercolorchange.
STANDARD
< LEDCONTROLLER
< REMOTE
2-1/2”W x 1”H x 3-3/8”L
A B CCONNECTORS (OPTIONAL)
18”L output wire
18”L input wire
18”L output wire
18”L input wire
FOR OUR CHANNEL MOUNTING OPTIONS, SEE PAGE 449
PART # DESCRIPTIONLED-RIBBON-RGB-CON 18”Ribbon-FlexConnectingCableLED-RIBBON-RGB-C24 24”Ribbon-FlexConnectingCableLED-RIBBON-RGB-C36 36”Ribbon-FlexConnectingCable
LED-RIBBON-RGB-CR-P
LED-RIBBON-RGB-TR
LED-RIBBON-RGB-CRM
PART # DESCRIPTIONA LED-RIBBON-2W-C 2-WayverticalconnectorB LED-RIBBON-3W-C 3-WayconnectorC LED-RIBBON-4W-C 4-Wayconnector
RGB RIBBON FLEX
LED LIGHTING24 VLinear
Material: Flexible PVC Cover w/Adhesive PowerSupply
NEW!
NEW!
I-452
12V 5.0A 60 WATT POWER SUPPLY(Constant Voltage)
POWER SUPPLY (Required)Includes 12” Power Link Cable
It is recommended that all electrical products be installed by a licensed electrician.
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
COLOR LUMENSCool White 107 x 3Warm White 100 x 3120˚
CW=75WW - 80
3300K 5500K
CoolWhite
WarmWhite
PureWhite
5/8” on center
5/16” Wide
1/8” ThickNominal3M™ Double-sided adhesive tape on bottom
With 20 LED’s per ft., our ECO
SERIES produces brilliant light
output!
RESTAURANTSKITCHENS
SHOWCASES
PRODUCT FEATURES:•Connectable 6” male/female connector and cable on each end•Slim,flexible&easytohide•IP65,suitableindamplocations
6’ Lead Wire
Plug-In6’ Cable
FOR OUR CHANNEL MOUNTING OPTIONS,
SEE PAGE 449POWER SUPPLY MEASUREMENTS
5-1/4”L x 2-1/4”W x 1-3/16”HPart #: LED-CL-TR60W
PART #COLOR TEMP LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CAN CONNECT
LED-RIBBON-12V-CW Cool White 16.5’ 330 26.4 32’LED-RIBBON-12V-WW Warm White
LED LIGHTING
ECO RIBBON FLEXPowerSupply
General DutyLight OutputGeneral DutyLight Output
12 VLinear
Material: Flexible PVC Cover w/Adhesive
I-453
20”1”
It is recommended that all electrical products be installed by a licensed electrician.
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For30,000Hours
COLOR LUMENSWarm White 4630˚
Cool White
WW=75
3000K
CoolWhite
WarmWhite
PureWhite
PRODUCT FEATURES:•3in1mountingsystem•On/offbuttononhead
Clamp Installation
(A)Lightarmwithon/offbutton &6ft.connectingcable(B)Screwcover(C)3-in-1mountingclamp(D)PowerSupply:2-5/8”Lx 1-3/8”Ww/1”Hw/12”Lcord(E)Mountinghardware
A
B C
D
EMOUNTING OPTIONS
Foredgeofanywood
furniture
Removable clamp
Permanent Installation
Holdsmaterialupto1-3/16”
thick.
Forawalloranyverticalsupport
Button
ALL INCLUSIVE KIT
Wall Mount Installation
Furniture Edge Installation
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For30,000Hours
COLOR LUMENSWarm White 150115˚
Cool White
WW=70
3000K
CoolWhite
WarmWhite
PureWhite
PRODUCT FEATURES:•Horizontalorvertical mountingoptions•On/offswitchonbase
Easy horizontal mounting for top
of furniture
Easy verticalmounting for
painting
2-1/2”
10”On/offswitch(A)Lightarmwithon/offswitch &6ft.connectingcable(B)PowerSupply:2-5/8”Lx 1-3/8”Ww/1”Hw/31”Lcord &rockerswitch(C)Mountinghardware
A
B
C
ALL INCLUSIVE KIT
PART #COLOR TEMP
# OF LEDCHIPS
TOTAL WATTAGE
LED-APHRODITE WarmWhite 12 1
PART #COLOR TEMP
# OF LEDCHIPS
TOTAL WATTAGE
LED-APOLLO WarmWhite 24 2
APHRODITELED LIGHTING
NEW!PowerSupply
General DutyLight OutputGeneral DutyLight Output
12VLight Arm
Material: Clear Anodized Aluminum
APOLLO NEW!PowerSupply
General DutyLight OutputGeneral DutyLight Output
12VLight Arm
Material: Clear Anodized Aluminum
I-454
(A) 3 lights w/peel & stick adhesive, screws & (3) 18” extension leads. (B) Battery pack: 5-5/16”L x 2-3/4”W x 2-3/4”H & 8 batteries included(C) Door plunger: 2-3/4”L x 2”W x 1”H w/3’ input/output wires
ALL INCLUSIVE KIT
It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:• Superthin,lowprofile...greatfortightapplications• Theincludeddoorplungerallowsthelighttoturnonwhenthedoorisopen& offwhenclosed•Whenactivated,thebuilt-intimeronthedoorplungerallowslighttoturnoff automaticallyin90seconds,thussavingbatterypower• Cheaperthaninstallinganelectricaloutlet• Suitedforexistingclosets,cabinetsordrawers• Surfacemountswithsuppliedpeel&sticktapeorscrews• Operateson8Dbatteries(included)• Lowvoltage-noriskofshock
2-1/8”
3”1/4” Thick Profile!
3” Direct interconnection
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For30,000Hours
COLOR LUMENSCool White 100Warm White 95120˚
CW=80WW=85
6500K3000K
CoolWhite
WarmWhite
PureWhite
See pgs. 434-435 for our LED Wafer “Way Far” Better Light & pg. 455 for our LED Wafer Track System
A
BC
We are proud to introduce the
first of it’s kind, low cost
LED Closet & Cabinetry
battery operated Wafer Puck Light!
Average Battery Life1.5 Years
PART #COLOR TEMP FINISH
MOUNT OPTION
# OF LEDCHIPS
TOTAL WATTAGE
LED-WF-CLS-MC-CW CoolWhite MatteChrome
Adhesive or ScrewMount
21 PerFixture 1.3WLED-WF-CLS-MC-WW WarmWhite
LED LIGHTINGNEW!
PowerSupply
WAFER PUCK LIGHT BATTERY OPERATED KIT
12 V (DC)Surface
Material: PVC Body w/Prismatic Clear
Polycarbonate Lens
General DutyLight OutputGeneral DutyLight Output
I-455It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:• Easilymovethepucklightsanywherealongthetrack• Freedomtoaddpucklightsanywhereyouneedthem• Offeredwith3’,4’,6’&12’tracks• Connectupto27pucklightsoff1transformer• Availablejumpercablesallowforshelftoshelf lightingconnections• Cooltothetouch-generatesnoheat!• Powercablelinkstotracks
2-1/8”
1/4” Thick Profile!
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For30,000Hours
COLOR LUMENSCool White 100Warm White 95120˚
CW=80WW=85
6500K3000K
CoolWhite
WarmWhite
PureWhite
See pgs. 434-435 for our LED Wafer “Way Far” Better Light & pg. 454 for our LED Battery Operated Wafer Kit
Add a light
anywhere needed!
Add up to 27 pucks per transformer
Move pucks anywhere
along track
Jumper Cables
See page 435 for power supplies & accessories
LED-WF-TR
LED-WF-TR-3A LED-INLINE-DIMIn Line Rotary Dimmer
LED-MSENMotion Sensor
LED-WF-DIM-RCRemote Control Dimmer
1 3
LED-SWITCH-1A
LED-SWITCH-3A
First Choose Your Required Power Supply:
Then Choose Your Options:
Rocker Switch
1 Amp
3 Amp
ACCESSORIES
•Tracktotrack connection• 2ft.long• Black
1 Choose a Track (comes with adhesive):
2-5/8” (Track can be field cut)
2 Choose Number of Wafer Lights:
PART # *COLOR LENGTHLED-WF-TRK-2-*
*BK=Black*WH=White
2Ft.LED-WF-TRK-3-* 3Ft.LED-WF-TRK-4-* 4Ft.LED-WF-TRK-6-* 6Ft.LED-WF-TRK-12-* 12Ft.
PART #COLOR TEMP FINISH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CANCONNECT
LED-WF-MC-CW-MT CoolWhite MatteChrome
21PerFixture 1.3W 9fixturesfor1amppowersupply
LED-WF-MC-WW-MT WarmWhite 27fixturesfor3amppowersupply
JC24
LED LIGHTINGNEW!
PowerSupply
MOVEABLE WAFER PUCK TRACK SYSTEM
12 VSurface
Material: PVC Body w/Prismatic Clear
Polycarbonate Lens
Super BrightLight OutputSuper BrightLight Output
I-456
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
It is recommended that all electrical products be installed by a licensed electrician.
.791” on CenterMaleConnector
FemaleConnector
5/8” Wide1/2”
5/8”
20”
A1 Amp POWER SUPPLY(Constant Voltage)2.95”L x 1.4”W x 2.04”H
B 3 Amp POWER SUPPLY(Constant Voltage)5.188”L x 2.18”W x 1.26”H
Can link up to 4 Pcs. of Bar of Light on 1 power supply.
Plug-In6’ Cable
Can link up to 14 Pcs. of Bar of Light on 1 power supply.
ROTARY DIMMER•Screwmountplate
Powersupplyconnectstothedimmerinputandthedimmeroutputconnectstothelightfixture.Dimslight0to100%
DIMMERS (Optional)
2.25”W x 3.5”H x 1.5”D
120˚
Mounting Bracket
w/screws Included
Dimmable!With Our LED-BL20 Dimmer
PRODUCT FEATURES:•Connectable•Slim,easytohide
Average Rated For50,000Hours
CW=75WW = 80
6500K3000K-3500K
CoolWhite
WarmWhite
PureWhite COLOR LUMENS
Cool White 360WarmWhite 317
Directinterconnection
CONNECTING CABLES (Optional)
ACCESSORIESPOWER SUPPLIES (Required)
1-3/8” W x 1” H x 2-5/8” L
INLINE ROTARY DIMMER•Adhesiveback
BothInclude18”PowerLinkCable
18” output wire
18” input wire
6’ Lead Wire
Plug-In6’ Cable
2’ output wire
2’ input wire
PART # DESCRIPTION WATTSA LED-BL20-TR-1A 24V-1Apowersupply 24wattsB LED-BL20-TR-3A 24V-3Apowersupply 84watts
PART #LED-BL20-DIM
PART # LENGTHLED-BL20-CON18 18”LED-BL20-CON24 24”LED-BL20-CON36 36”
PART #COLOR TEMP FINISH LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CAN CONNECT
LED-BL20-CW CoolWhite AnodizedAluminum 20” 24per
fixture 5.76 UpTo23’LED-BL20-WW WarmWhite
PART #LED-INLINE-DIM
“BAR OF LIGHT”
LED LIGHTING
PowerSupplySuper BrightLight OutputSuper BrightLight Output
24 VLinear
Material: Aluminumw/PolycarbonateLens
NEW!
I-457It is recommended that all electrical products be installed by a licensed electrician.
STANDARD ULTIMATE ADVANCED
< LEDCONTROLLER
< REMOTEPOCKET
SIZE
7 Solid ColorsRED BLUE PURPLE WHITE
GREEN YELLOW CYAN
.791” on CenterMaleConnector
FemaleConnector
5/8” Wide1/2”
5/8”
20”
PRODUCT FEATURES:•ConnectableRGBcanbe programmedtostrobeor morph•Slim,easytohide
Directinterconnection
A1 Amp POWER SUPPLY(Constant Voltage)2.95”L x 1.4”W x 2.04”H
B 3 Amp POWER SUPPLY(Constant Voltage)5.188”L x 2.18”W x 1.26”H
Can link up to 4 Pcs. of Bar of Light on 1 power supply
Plug-In6’ Cable
Can link up to 14 Pcs. of Bar of Light on 1 power supply
RGB LED CONTROLLER & REMOTE CONTROL SET (Required)
LIGHTING SPECIFICATIONSBEAM SPREAD LUMINESCENCE
120˚
Average Rated For50,000Hours
COLOR LUMENSRed 19
Green 32Blue 10
CONNECTING CABLES (Optional)
ACCESSORIES
2-1/2”W x 1”H x 2-3/8”L
2-1/8”W x 1”H x 4-3/8”L
LED >CONTROLLER
< REMOTEPOCKET
SIZE
18”L output wire
18”L input wire
POWER SUPPLIES (Required)Both Include 18” Power Link Cable
Mounting Bracket
w/screws Included
18”L output wire
18”L input wire
• Allowsusertostopatasolidcolor,morph or strobe
• Allowsusertostopatashadeofanysolid color,morphorstrobe6’ Lead
Wire
Plug-In6’ Cable
PART #COLOR TEMP FINISH LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CAN CONNECT
LED-BL20-RGB RGB AnodizedAluminum 20” 24per
fixture 5.76 UpTo23’
PART # DESCRIPTION WATTSA LED-BL20-TR-1A 24V-1Apowersupply 24wattsB LED-BL20-TR-3A 24V-3Apowersupply 84watts
PART #LED-BL20-RGB-CRM
PART # LENGTHLED-BL20-RGB-CON18 18”LED-BL20-RGB-CON24 24”LED-BL20-RGB-CON36 36”
PART #LED-BL20-RGB-CRP
“BAR OF LIGHT”
LED LIGHTING24 VLinear
Material: Aluminumw/Polycarbonate Lens
NEW!
PowerSupply
I-458
1” on Center 0.2 WattsMaleConnector
FemaleConnector
3/8” Wide.280”
Tape.385” 3M™ Double-sided
adhesive tape on bottom
SMD5050
12” LENGTH SHOWN
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
CW=75WW = 80
PRODUCT FEATURES:•Connectable•Extremelycompact,easy tohide
6500K3000K-3500K
CoolWhite
WarmWhite
PureWhite
It is recommended that all electrical products be installed by a licensed electrician.
Dimmable!
Directinterconnection
120˚
SIZE COLOR LUMENS
12” CW 192WW 144
16” CW 240WW 180
PART #COLOR TEMP DESCRIPTION LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
MAX # CAN CONNECT
LED-SLSH-12 CoolWhite 12”CompactLEDStickLight 12” 12 2.4WUpTo15’LED-SLSH-12-WW WarmWhite
LED-SLSH-16-CW CoolWhite 16”CompactLEDStickLight 16” 15 3WLED-SLSH-16-WW WarmWhite
LED “THIN” LIGHTS
LED LIGHTING
PowerSupplyAmbient Mood
Light Output
12 VLinear
Material: Polycarbonate
I-459It is recommended that all electrical products be installed by a licensed electrician.
**PLEASE NOTE: 12” & 16” STICK LIGHTS MAY BE MIXED & MATCHED. DO NOT EXCEED WATTAGE OF POWER SUPPLY.
ALLOWS YOU TO GET AROUND UNLIT AREAS WITH ONE POWER SUPPLY!
SIZE: 2-3/4” x 1-1/8” x 2-1/4”
CAN LINK UP TO 5 pcs. of 12” Stick Lights
OR4 pcs. of 16” Stick LightsON 1 POWER SUPPLY!
MAXIMUM 5’ SIZE: 3-13/16” x 1-3/4” x 1-1/2”
CAN LINK UP TO 15 pcs. of 12” Stick Lights
OR12 pcs. of 16” Stick Lights
ON 1 POWER SUPPLY!MAXIMUM 15’
5’ CORD 6’ CORD
CONNECTING CABLES (OPTIONAL)
DIMMERS (OPTIONAL)
POWER SUPPLY (REQUIRED)
ROTARY DIMMER • Screw mount plate
A 1 AMP B 3 AMP
2.25” Width 3.5” Height 1.5” Depth
REMOTE CONTROL DIMMER • Screw mount plate
Supplied with 2 remote controls
- Batteries Included.
2.25” Width 1.25” Height4.5”Overall Length
12” CORD CONNECTOR
PEEL-N-STICK MOUNT
SCREW MOUNT
SUPPLIED WITH 2 MOUNTING OPTIONS
IN LINE ROTARY DIMMER • Adhesive back
12” output
wire12” output wire
18” input wire18” input
wire
- Dims light 0 to 100%
1-3/8” Width1” Height 2-5/8” Length
2’ output wire
2’ input wire
LED-SLSH-DIM-R LED-SLSH-DIM-RCLED-INLINE-DIM
PART # DESCRIPTIONLED-SLSH-12C 12”ConnectingCableLED-SLSH-24C 24”ConnectingCableLED-SLSH-36C 36”ConnectingCable
PART # DESCRIPTION WATTSA LED-SLSH-TR 12V-1ACompactLEDPowerSupply(Constant Voltage) 12wattsB LED-SLSH-TR-3A 12V-3ACompactLEDPowerSupply(Constant Voltage) 36watts
LED “THIN” LIGHTS
LED LIGHTING
PowerSupply
NEW!
Ambient MoodLight Output
12 VLinear
Material: Polycarbonate
I-460
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
CW=75WW = 80
COLOR LUMENS COLOR LUMENSLED-T512-CW 190 LED-T536-CW 550LED-T512-CW 170 LED-T548-CW 850LED-T524-CW 400 LED-T548-CW 750LED-T524-CW 340 LED-T560-CW 1100LED-T536-CW 600 LED-T560-CW 970
160˚4100K3000-3500K
CoolWhite
WarmWhite
PureWhite
5 Available in Different Lengths
4 Ft.Dia. 5/8”
(Actual Size Shown)
5 Ft.
2 Ft. 3 Ft.1 Ft.
Light Box Lighting
Showcase Lighting
It is recommended that all electrical products be installed by a licensed electrician.
Virtually Seamless!
Direct Connection
FemaleConnector
Frosted Lens
Anodized Aluminum Housing
Male Connector
PRODUCT FEATURES:•Connectable•Lowprofile-easytohide
Freezer/Refrigerator Lighting
■ Please Note: LED-T548-*-S is specially designed to fit underneath 4’ metal shelving from Lozier, Madix, or Streater.
PART #*COLOR
TEMP LENGTH# OF LED
CHIPSTOTAL
WATTAGEMAX # CANCONNECT
LED-T512-* *CW=CoolWhite
or*WW=
WarmWhite
13” 60 4.5Upto17’
LED-T524-* 23.23” 120 9LED-T536-* 35.03” 192 15
■ LED-T548-*-S 45” 264 20LED-T560-* 58.66” 336 25
ItistheonlyLEDproductonthemarket
todaywhereyoumayreally need adimmer!
SUNRAY T5 FIXTURE
LED LIGHTING12 VLinear
Material: Aluminum w/Polycarbonate Lens
Super BrightLight OutputSuper BrightLight Output
A VARIETY OF MOUNTING HARDWARE OPTIONS W/SCREWS ARE INCLUDED WITH EACH FIXTURE!
1 Pair/Non-HandedHorizontal
OptiOn A Wood Shelf Clip
Small Clip
1 Pair/Non-HandedVertical/Horizontal
1 Pair/Non-HandedPull Strength - 22 lbs.
1/4” Glass Shelf ClipOptiOn B Wood Shelf Clip
Ideal for Gondola Shelving
Magnetic Clip
ALLOWS FOR QUICK AND SECURE INSTALLATION OF LIGHT
Shelf LightingCabinet LightingMAGNETIC CLIP
I-461
A1 Amp Power Supply(Constant Voltage)2.95”L x 1.4”W x 2.04”H
B 3 Amp Power Supply(Constant Voltage)5.188”L x 2.18”W x 1.26”H
Plug-In6’ Cable
6’ Lead Wire
Plug-In6’ Cable
It is recommended that all electrical products be installed by a licensed electrician.
ACCESSORIES
ROTARY DIMMER•Screwmountplate
Power supply connects to the dimmer input and the dimmer outputconnectstothelightfixture.Dimslight0to100%
DIMMERS (Optional)
2.25”W x 3.5”H x 1.5”D
POWER SUPPLIES (Required)
INLINE ROTARY DIMMER•Adhesiveback
18” output wire 18”
input wire
NOTE: Mustusethepowersupplies&dimmeronthispagewiththeSunRayinordertoworkproperly.Add 1/2” to overall length
CONNECTING CABLES (Optional)
1-3/8”W x 1”H x 2-5/8”D
•18”connecting cable included. 12”,24”&48"areavailableasoptions.•Allowsyoutogetaroundunlitareas with one power supply.
2’ output wire
2’ input wire
PART # DESCRIPTION WATTSA LED-T5-TR-1A 24V-1Apowersupply 24wattsB LED-T5-TR-3A 24V-3Apowersupply 84watts
PART #LED-T5-DIM
PART #LED-INLINE-DIM
PART # LENGTHLED-T5-CC-12 12”LED-T5-CC-24 24”LED-T5-CC-48 48”
SUNRAY T5 FIXTURE
LED LIGHTING12 VLinear
Material: Aluminum w/Polycarbonate Lens
Super BrightLight OutputSuper BrightLight Output
NEW!
I-462
SPECIFICATIONS:LUMENS BULB LIFE COLOR TEMP WATTAGE VOLTAGE BEAM SPREAD UV RATING HEAT SINK
HR-STK-8CW=7130,000 hours
Cool White5350-5650K
1.6 Watts
24V 65 degree No UV Aluminum Housing
HR-STK-12CW=107 2.4 WattsHR-STK-8WW=56 Warm White
3250-3650K1.6 Watts
HR-STK-12WW=87 2.4 Watts
It is recommended that all electrical products be installed by a licensed electrician.
100%DIMMABLE
5/16”
3/8”
with mounting clip
3/8”L= (8”, 12”)
LENGTH WATTS8” 1.612” 2.4
• Shown with HR-STK-CC12Connecting Cable
PRODUCT FEATURES:• Fully dimmable.• Ultra compact strips feature very high and even light output.• Available in two lengths: 8” & 12”.• Aluminum and Plexiglass housing.• Available in Cool White and Warm White.• 30,000 hour bulb life.• Can be recessed (Flush w/board) or Surface Mounted.• Up to 8’ of Stick LED can be connected per run, up to 6 runs per power supply. Must not exceed power supply wattage.• Can be directly connected or linked using an optional connecting cable.• Mounts with U-shaped mounting clips or adhesive tape (included).• Ideal for cooler and freezer cases & all commercial applications• Color rendering index: CW=80, WW=90.
PART # DESCRIPTIONHR-STK-8CW 8” Long, 1.6 Watt Stick, Cool WhiteHR-STK-8WW 8” Long, 1.6 Watt Stick, Warm WhiteHR-STK-12CW 12” Long, 2.4 Watt Stick, Cool WhiteHR-STK-12WW 12” Long, 2.4 Watt Stick, Warm White
POWER SUPPLIES - A Power Supply is Required.HR-STK-E30 30 Watt Constant Voltage DriverHR-STK-60 60 Watt Constant Voltage Driver
CABLE & CONNECTORS - 1 Power Cord is Required.HR-STK-PC 98” Long Power Cord
HR-STK-CC1 1” Long Connecting CableHR-STK-CC12 12” Long Connecting CableHR-STK-CC39 39” Long Connecting Cable
DIMMING ACCESSORIES - OptionalHR-STK-PSDIM *Dimmer for Stick LED
HR-STK-DIM *Dimmer Controller for Stick LED* Both are required for proper dimmer function
stick
LED LIGHTING24 VLinear
I-463
SPECIFICATIONS:LUMENS BULB LIFE COLOR TEMP WATTAGE VOLTAGE BEAM SPREAD UV RATING HEAT SINK
HR-STK2-8CW=11130,000 hours
Cool White5350-5650K
3 Watts
24V 65 degree No UV Aluminum Housing
HR-STK2-12CW=167 4.4 WattsHR-STK2-8WW=89 Warm White
3250-3650K3 Watts
HR-STK2-12WW=134 4.4 Watts
It is recommended that all electrical products be installed by a licensed electrician.
3/8” L= (8”, 12”)
11/16”
with mounting clip
5/16”
LENGTH WATTS8” 312” 4.4
PRODUCT FEATURES:• Extremely high light output, similar to a 75 flourescent light fixture.• Available in two lengths: 8” & 12”.• Aluminum and Plexiglass housing.• Available in Cool White and Warm White.• 30,000 hour bulb life.• Can be recessed (Flush w/board) or Surface Mounted.• Up to 8’ of Twin Stick LED can be connected per run, up to 6 runs per power supply. Must not exceed power supply wattage.• Can be directly connected or linked using an optional connecting cable.• Mounts with U-shaped mounting clips or adhesive tape (included).• Ideal for cooler and freezer cases & all commercial applications• Color rendering index: CW: 80, WW=90.** Twin Stick LED CANNOT be dimmed at this time.
PART # DESCRIPTIONHR-STK2-8CW 8” Long, 3 Watt Stick, Cool WhiteHR-STK2-8WW 8” Long, 3 Watt Stick, Warm WhiteHR-STK2-12CW 12” Long, 4.4 Watt Stick, Cool WhiteHR-STK2-12WW 12” Long, 4.4 Watt Stick, Warm White
POWER SUPPLIES - A Power Supply is Required.HR-STK-E30 30 Watt Constant Voltage DriverHR-STK-60 60 Watt Constant Voltage Driver
CABLE & CONNECTORS - 1 Power Cord is Required.HR-STK2-PC 98” Long Power Cord
HR-STK2-CC1 1” Long Connecting CableHR-STK2-CC12 12” Long Connecting CableHR-STK2-CC39 39” Long Connecting Cable
HR-STK2-90DC-L 90° Direct Connector - LeftHR-STK2-90DC-R 90° Direct Connector - Right
twin stick
LED LIGHTING24 VLinear
I-464
SLENDERLIGHT FIXTURES & REPLACEMENT BULBS
PRODUCT FEATURES:• Eachfixturecomeswithacoolwhite orwarmwhitebulb,protectivelens cover,powercord,screws&plastic mountingclip.• Whiteplasticcasing.• StandardON/OFFswitch.• Builtinmale/femaleconnection- noextraaccessoriesrequiredfordirect connections!• Built-inelectronicballast.• Approximatebulblife8000-10,000 hours.• Hardwireboxnowavailable.
Direct Connection
Connecting Cables
It is recommended that all electrical products be installed by a licensed electrician.
SUPER BRITE• More lumen output
• Cool White & Warm White bulbs• RFI protection
• Free power cord with each order!
Great for undercabinet store fixtures & displays!
PART# COLOR WATTS LUMENS
MAXIMUM# OF FIXTURES
CAN JOINDIMENSIONS REPLACEMENT
LAMPS COLORA B C DSL11F
White
6W 350 26 11” 1-3/4” 13/16” 9-1/16” SL11-CW-BULB CoolWhiteSL11F-WW SL11-WW-BULB WarmWhite
SL15F 10W 630 16 15-13/16” 1-3/4” 13/16” 13-7/8” SL15-CW-BULB CoolWhiteSL15F-WW SL15-WW-BULB WarmWhite
SL20F 16W 1000 10 20-13/16” 1-3/4” 13/16” 18-7/8” SL20-CW-BULB CoolWhiteSL20F-WW SL20-WW-BULB WarmWhite
SL24F 20W 1280 8 24-13/16” 1-3/4” 13/16” 22-7/8” SL24-CW-BULB CoolWhiteSL24F-WW SL24-WW-BULB WarmWhite
SLENDERLIGHT ACCESSORIESPART# DESCRIPTION PART# DESCRIPTION
SL-PWR* 5’longwhitepowercord SL-CC 1-1/2’whiteconnectingcable*-NOW INCLUDED WITH EACH FIXTURE SL-CC-4 4’longwhiteconnectingcable
PART# DESCRIPTION SL-CC-6 6’longwhiteconnectingcableSL-PWR-6 6-1/2’longpowercord SL-HW whitehardwirebox
SL-PWR-10 10’longpowercord SL-HW-S whitehardwireboxw/switch
T4 COMPACT LIGHTING
FLUORESCENT LIGHTING120 V
Linear
I-465
PRODUCT FEATURES:ENERGY EFFICIENT: 7W, 10W & 18W lamp options. Triphospher instant start lamp is quiet & flicker free.SUPERIOR BULBLIFE: Bulblife is rated at approximately 10,000 hours.UV FILTRATION: Plexiglass cover filters virtually all radiation out, thus preventing discoloration of products, display or countertops.EXTRAORDINARY LIGHT OUTPUT: Offers excellent product illumination. Lumen output up to 1,350.VERY LITTLE HEAT GENERATED: So low even chocolate and lipstick will keep their original shape.STURDY CONSTRUCTION: High quality components used from Europe and Japan, thus ensures maximum ballast lifetime up to 100,000 hours.RFI FILTERS!: Built in RFI filters fulfills the US FCC requirements. SURGE PROTECTION: Up to 1800 Volts. COMMERCIAL GRADE CONNECTORS.
USED BY FORTUNE 500 COMPANIES NATIONWIDE!
It is recommended that all electrical products be installed by a licensed electrician.
SHOWN WITH DIRECT CONNECTOR
COMPONENTS:Plexiglass
Cover
T4Flourescent
Bulb
White Plastic casingwith Built-in Ballast
ON / OFFROCKER SWITCH
FIXTURE DIMENSIONS:
SLIM-DC SLIM-RS
Connect Fixtures up to 155 Watts
Maximum.
ENERGYEFFICIENTCOMMERCIAL
GRADE WITH VERY LOW FAILURE RATE!
COMPONENTS & ACCESSORIESPART # DESCRIPTION PART # DESCRIPTION
SLIM-PC 6' Long Power Cord SLIM-PC-SW 6' Long Power Cord w/Roll SwitchSLIM-CAB-6 6" Long Connecting Cable SLIM-RS On/Off Rocker Switch
SLIM-CAB-12 12" Long Connecting Cable SLIM-HB Hardwire Box w/o SwitchSLIM-CAB-24 2' Long Connection Cable SLIM-HB-S Hardwire Box w/SwitchSLIM-CAB-48 4' Long Connection Cable SLIM-DC Direct ConnectorSLIM-CAB-72 6' Long Connection Cable SLIM-SMC-M Metal Mounting Clip For 10", 13" & 20"
LAMPS AND PLEXI GLASS COVER INCLUDED WITH EACH FIXTURE
PART# WATTS
MAXIMUM# OF FIXTURES
CAN JOINLUMENOUTPUT
REPLACEMENTBULB COLOR
SLIM-10-CW 7W 21 420 SLIM-10-BULB Cool WhiteSLIM-10-WW SLIM-10-BULB-WW Warm WhiteSLIM-13-CW 10W 15 700 SLIM-13-BULB Cool WhiteSLIM-13-WW SLIM-13-BULB-WW Warm WhiteSLIM-20-CW 18W 8 1,350 SLIM-20-BULB Cool WhiteSLIM-20-WW SLIM-20-BULB-WW Warm White
FLUORESCENT LIGHTINGSLIMLIGHT™
T4 COMPACT LIGHTING120 V
Linear
I-466
PRODUCT FEATURES:ENERGY EFFICIENT: Rated as high as 98% efficient.SUPERIOR BULBLIFE: Bulblife is rated at approximately 20,000 hours.UV FILTRATION: Plexiglass cover filters virtually all radiation out, thus preventing discoloration of products, display or countertops.EXTRAORDINARY LIGHT OUTPUT: Offers excellent product illumination. Lumen output up to 3,650.VERY LITTLE HEAT GENERATED: So low even chocolate and lipstick will keep their original shape.STURDY CONSTRUCTION: High quality components used from Europe and Japan, thus ensures maximum ballast lifetime up to 100,000 hours.RFI FILTERS!: Built in RFI filters fulfills the US FCC requirements.SURGE PROTECTION: Up to 1800 Volts. COMMERCIAL GRADE CONNECTORS.
COMMERCIAL GRADE WITH VERY
LOW FAILURE RATE!
It is recommended that all electrical products be installed by a licensed electrician.
SHOWN WITH DIRECT CONNECTOR
COMPONENTS:Plexiglass
Cover
T5Flourescent
Bulb
White Aluminum casingwith Built-in Ballast
ON / OFFROCKER SWITCH
SLIM-DC35 Watt = 58-7/16”
28 Watt = 46-3/4”
21 Watt = 34-7/8”
14 Watt = 23-1/8”
8 Watt = 12-7/8”
29/32”
1-5/
16”
FIXTURE DIMENSIONS:
SLIM-RS
AVAILABLEIN LENGTHS
FROM 1' TO 5'
ENERGYEFFICIENT
Connect Fixtures up to 585 Watts
Maximum.
USED BY FORTUNE 500 COMPANIES NATIONWIDE!
LAMPS AND PLEXI GLASS COVER INCLUDED WITH EACH FIXTURE
PART# WATTS
MAXIMUM# OF FIXTURES
CAN JOINLUMEN
OUTPUTREPLACEMENTBULB COLOR
SLIM-12-WH 8W 41 400 SLIM-12-BULB Cool WhiteSLIM-12-WW SLIM-12-BULB-WW Warm WhiteSLIM-23-CW 14W 41 1,350 SLIM-23-BULB Cool WhiteSLIM-23-WW SLIM-23-BULB-WW Warm WhiteSLIM-34-WH 21W 29 2,100 SLIM-34-BULB Cool WhiteSLIM-34-WW SLIM-34-BULB-WW Warm WhiteSLIM-46-WH 28W 23 2,900 SLIM-46-BULB Cool WhiteSLIM-46-WW SLIM-46-BULB-WW Warm WhiteSLIM-59-WH 35W 18 3,650 SLIM-59-BULB Cool WhiteSLIM-59-WW SLIM-59-BULB-WW Warm White
COMPONENTS & ACCESSORIESPART # DESCRIPTION PART # DESCRIPTION
SLIM-PC 6' Long Power Cord SLIM-PC-SW 6' Long Power Cord w/Roll SwitchSLIM-CAB-6 6" Long Connecting Cable SLIM-RS On/Off Rocker SwitchSLIM-CAB-12 12" Long Connecting Cable SLIM-HB Hardwire Box w/o SwitchSLIM-CAB-24 2' Long Connection Cable SLIM-HB-S Hardwire Box w/SwitchSLIM-CAB-48 4' Long Connection Cable SLIM-DC Direct ConnectorSLIM-CAB-72 6' Long Connection Cable SLIM-SMC-46 Mounting Clip For 23", 34", 46" & 59"
SLIM-SMC-46M Metal Mounting Clip For 23", 34", 46" & 59"
FLUORESCENT LIGHTINGSLIMLIGHT™
T5 COMPACT LIGHTING120 V
Linear
I-467It is recommended that all electrical products be installed by a licensed electrician.
CONNECTING CABLES ALLOW FOR SPACING BETWEEN FIXTURES
DIRECT CONNECTOR - USE FOR LAMP TO LAMP CONNECTION
ACCESSORIES
6”
12”
18”
ConnectingCables
GREAT FOR UNDER
CABINETS,FURNITURE
DISPLAYS OR
GONDOLAS!
PRODUCT FEATURES:•EachfixturecomeswithaCOOL WHITEorWARMWHITEbulb, protectivelenscover,6-footpowercord, screws,plasticmountingclipsandone directconnector•SturdyallwhitePVCconstruction•StandardON/OFFswitch.•Builtinelectronicendoflifeballastwith rapidstart•Approximatebulblifeis10,000hoursBONUS FEATURES:•ULTRALOWPROFILE-ONLY7/8”•Easytofindreplacementbulbs:T5lampsreadilyavailable!
PVCMounting
Clips
7/8”
1-11/16”
”D”-LIGHT ACCESSORIESPART# DESCRIPTION
DLS-6CC 6”LConnectingCableDLS-12CC 12”LConnectingCableDLS-18CC 18”LConnectingCableDLS-HB WhiteHardwireBox
DLS-HB-S WhiteHardwireBoxw/Switch
DLS-CLP Setof(2)PlasticWhiteMountingClips
”D”-LIGHT FIXTURES WITH BULB REPLACEMENT BULBS
PART# WATTS LUMENSMAX #
CAN JOINDIMENSIONS REPLACEMENT
LAMPSLAMP
COLORLENGTH WIDTH DEPTHDLS-8W-CW 8W 400 10 13-1/2” 1-11/16” 7/8” DLSB-8W-CW CoolWhiteDLS-8W-WW 8W 400 10 13-1/2” 1-11/16” 7/8” DLSB-8W-WW WarmWhiteDLS-13W-CW 13W 715 10 22-1/2” 1-11/16” 7/8” DLSB-13W-CW CoolWhiteDLS-13W-WW 13W 715 10 22-1/2” 1-11/16” 7/8” DLSB-13W-WW WarmWhiteDLS-14W-CW 14W 750 10 23-13/16” 1-11/16” 7/8” DLSB-14W-CW CoolWhiteDLS-14W-WW 14W 750 10 23-13/16” 1-11/16” 7/8” DLSB-14W-WW WarmWhiteDLS-18W-CW 18W 900 10 25-1/8” 1-11/16” 7/8” DLSB-18W-CW CoolWhiteDLS-18W-WW 18W 900 10 25-1/8” 1-11/16” 7/8” DLSB-18W-WW WarmWhiteDLS-21W-CW 21W 1260 10 35-1/2” 1-11/16” 7/8” DLSB-21W-CW CoolWhiteDLS-21W-WW 21W 1260 10 35-1/2” 1-11/16” 7/8” DLSB-21W-WW WarmWhiteDLS-24W-CW 24W 1440 10 37-1/4” 1-11/16” 7/8” DLSB-24W-CW CoolWhiteDLS-24W-WW 24W 1440 10 37-1/4” 1-11/16” 7/8” DLSB-24W-WW WarmWhiteDLS-28W-CW 28W 1820 10 47” 1-11/16” 7/8” DLSB-28W-CW CoolWhiteDLS-28W-WW 28W 1820 10 47” 1-11/16” 7/8” DLSB-28W-WW WarmWhite
“D” LIGHT T5COMPACT LIGHTING
FLUORESCENT LIGHTING120 V
LinearMaterial: White PVC
w/Polycarbonate Lens
NEW!
I-468It is recommended that all electrical products be installed by a licensed electrician.
CONNECTING CABLES ALLOW FOR SPACING BETWEEN FIXTURES
DIRECT CONNECTOR - USE FOR LAMP TO LAMP CONNECTION
18”
PRODUCT FEATURES:•Longlasting•Energyefficient•Costeffective•Canconnectupto10 pcs.on1powercord
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For15,000Hours
CW=75WW = 80
COLOR LUMENSCoolWhite
8W=72016W=130520W=1800
WarmWhite
8W=57616W=104420W=1440
7/8”
1-11/16”
120˚5000K3000K
CoolWhite
WarmWhite
PureWhite
GREAT FOR
UNDER CABINETS,
FURNITURE DISPLAYS
OR GONDOLAS!
ACCESSORIES
6”
12”
18”
ConnectingCables
PVCMounting
Clips
”D”-LIGHT ACCESSORIESPART# DESCRIPTION
LED-DLS-6CC 6”LConnectingCableLED-DLS-12CC 12”LConnectingCableLED-DLS-18CC 18”LConnectingCableLED-DLS-HB WhiteHardwireBox
LED-DLS-HB-S WhiteHardwireBoxw/Switch
LED-DLS-CLP Setof(2)PlasticWhiteMountingClips
PART #COLOR TEMP LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
LED-DLS-8W-CW CoolWhite 23.77” 96 8WLED-DLS-8W-WW WarmWhiteLED-DLS-14W-CW CoolWhite 35.59” 168 14WLED-DLS-14W-WW WarmWhiteLED-DLS-18W-CW CoolWhite 47.40” 240 18WLED-DLS-18W-WW WarmWhite
“D” LIGHT T5COMPACT LIGHTING
LED LIGHTING120 V
LinearMaterial: White PVC
w/Polycarbonate LensSuper BrightLight OutputSuper BrightLight Output
NEW!
Flexible!
Photos Courtesy of Peter Salerno Inc. of Wyckoff, NJ
Decks Poolside
Floats
Signs
Gardens
Outdoor Use
Commercial & Residential
THE BEST ROPE-LIGHTS YET!
The Original
See Pages 472-473
See Pages 470-471
Cabinet & Furniture
I-469
LINEAR LIGHTING
I-470
HD
E
F
I & J
LED FLEXILIGHT ACCESSORIES
C with K
CB
Items B or C used when changing colors or adding length. Use item C when splicer projection or dia. width is crucial (it is the same dia. as Flexilight).
Flexilight shown using item C (low profile splicer) to fit into item K (straight edge track).
It is recommended that all electrical products be installed by a licensed electrician.
Please see page 473 for special Flexilight mounting channels.When planning your installation, it is recommended you review your plan with a licensed electrician.
It is strongly recommended that you read the installation booklet before installing Flexilight.
G
Flexible “Y” Splitter - 18” overall length
A
K FLEXILIGHT™
U-CHANNEL
PRODUCT FEATURES:•Clear 3/8” or 1/2” PVC tubing with colored LED bulbs for brighter output.• Horizontal bulb insertion for more evenly spread light.• UV stabilized PVC tubing.• All power cords have an attached rectifier to stabilize current.• Approximate bulb life 40,000 hours (without degrading).• UL listed for indoor and outdoor use.• Extendable up to 180 ft. on blue, green, clear (cool white) & warm white. 270 ft. on red, yellow & orange.• 1” bulb spacing.
AllourLEDflexilightisULlistedandwarranteedasanon-cuttableproduct.Ifacustomerchooses to cut the product, they do so at their own risk. Cutting voids all UL & warranty.
F ENERGY EFFICIENT F
LED LIGHTING
ROPE LIGHT120 VLinear
I-471It is recommended that all electrical products be installed by a licensed electrician.
Please see page 473
for special Flexilight mounting channels.
When planning your installation, it is recommended you review your plan with a licensed electrician.It is strongly recommended that you read the installation booklet before installing Flexilight.
INSTALLATION ACCESSORIES
AllourLEDflexilightisULlistedandwarranteedasanon-cuttableproduct.Ifacustomerchoosestocutthe product, they do so at their own risk. Cutting voids all UL & warranty.
Choose from 7 different colors:
RedAvailable in
27 ft. & 153 ft. coils
Yellow Available in
27 ft. & 153 ft. coils
BlueAvailable in
30 ft. & 150 ft. coils
GreenAvailable in
30 ft. & 150 ft. coils
Clear (Cool White)Color Temp: 8000-10000K
Available in30 ft. & 150 ft. coils
Orange Available in
27 ft. & 153 ft. coils
Warm WhiteColor Temp: 3000-3200K
Available in30 ft. & 150 ft. coils
F ENERGY EFFICIENT F
2 STYLES TO CHOOSE FROM:COLOR CODES
Red = RD, Yellow = YW, Blue = BL, Green = GR, Orange = OR, Clear (Cool White) = CL, Warm White = WW
3/8” MINI
1/2” STANDARD
CUTTINGSPECIFICATIONS
ACCESSORIESINCLUDED PART # PART #
27 FT. KIT 54” 1 Power Cord
& 1 End CapCBLDM-27R-
Specify Color: Red, Yellow or OrangeCBLD-27R-
Specify Color: Red, Yellow or Orange
30 FT. KIT 36” 1 Power Cord
& 1 End CapCBLDM-30R-
Specify Color: Blue, Green, Clear or Warm White
CBLD-30R-Specify Color: Blue, Green,
Clear or Warm White
150 FT. KIT
36”Dotted Line
Noted
150 Mounting Clips, Screws/
Tie Straps, 1 Power Cord & 1 End Cap
CBLDM-150R-Specify Color: Blue, Green,
Clear or Warm White
CBLD-150R-Specify Color: Blue, Green,
Clear or Warm White
153 FT. KIT
54”Dotted Line
Noted
150 Mounting Clips, Screws/
Tie Straps, 1 Power Cord & 1 End Cap
CBLDM-153R-Specify Color:
Red, Yellow or Orange
CBLD-153R-Specify Color:
Red, Yellow or Orange
3/8” MINIPART #
1/2” STANDARDPART # DESCRIPTION
A CBLDM-PC6 CBLD-PC6 6-foot Power Cord w/RectifierB CBM-SPL CB-SPL Locking Splice ConnectorC CBM-INV-SPL CB-INV-SPL Invisible Splice ConnectorD CBM-END CB-END Clear End CapE CBM-CLIP CB-CLIP Mounting ClipF NCT-400 NCT-400 4” Plastic Cable TieG CBM-3WY CB-3WY Flexible 3-way “Y” SplitterH CBM-3WT CB-3WT Rigid 3-way “T” SplitterI CBM-FILL-2 CB-FILL-2 2-foot Filler CableJ CBM-FILL-10 CB-FILL-10 10-foot Filler CableK 121-CL Clear Plastic U-Channel
(sold in full 12 foot lengths only)
K 383-CL Clear Plastic U-Channel(sold in full 12 foot lengths only)
LED LIGHTING
ROPE LIGHT120 VLinear
I-472
CUTTABLE FLEXILIGHT ACCESSORIES
PRODUCT FEATURES:• 1/2-inch diameter rope is highly flexible.• 120-volt product, with 1/2-watt bulbs spaced 1-inch apart.• Cuttable every 18-inches, rope is marked for easy cutting.• Plug-in product with a standard 6-foot cord and 2-prong plug.• Approximate 20,000 hour bulb life.• Crush resistant up to 200 PSI (pounds per square inch).• Run up to a 150-foot length off a single power cord.• Dimmable with a standard “incandescent” (120v) dimmer. Note: Cuttable Flexlight is NOT a UL approved product!
A
H
G
F
E
D
K & L M
CBItems B or C used when changing colors or adding length. Use item C when splicer projection or dia. width is crucial (it is the same dia. as Flexilight).I
Fits over power connector for outdoor applications (must use with non-acidic silicone glue).
C with J
Flexilight shown using item C (low profile splicer) to fit into item J (straight edge track).
Flexible “Y” Splitter - 18” overall length
J
FLEXILIGHT™
U-CHANNEL
It is recommended that all electrical products be installed by a licensed electrician.
Please see next page for special Flexilight mounting channels.When planning your installation, it is recommended you review your plan with a licensed electrician.
It is strongly recommended that you read the installation booklet before installing Flexilight.
INCANDESCENT LIGHTING ORIGINAL CUTTABLE
ROPE LIGHT120 V
Linear
I-473
INSTALLATION ACCESSORIES
It is recommended that all electrical products be installed by a licensed electrician.
When planning your installation, it is recommended you review your plan with a licensed electrician.It is strongly recommended that you read the installation booklet before installing Flexilight.
Includes:3 power cords, 3 end caps & 3 Locking Splice Connectors
choose From 9 different colors:
Clear = *CL Blue = *BL Green = *GR Pink = *PK Purple = *PL Pearl White = *PWOrange = *OR Red = *RD Yellow = *YE
PLEASE NOTE: If cutting flexilight, it is very important to make sure connector is seated fully and both pins of connector make contract with internal wires of flexilight. Failure to do so may cause product to overheat & malfuntion.
6 MOUNTING CHANNELS (OPTIONAL)
6
4
5
1 WITHADHESIvE 3 CSB-40-BA CSB-40-BLK
CF-40-BLK CF-40-BA
2
Flexilight Rope cutter
150-foot roll, 1/2-inch Original Flexilight: Part#CB-150R-* PART # DESCRIPTION
A CB-PC6 6-foot Power CordB CB-SPL Locking Splice ConnectorC CB-INv-SPL Invisible Splice ConnectorD CB-END Clear End CapE CB-CLIP Mounting ClipF NCT-400 4” Plastic Cable TieG CB-3WY Flexible 3-way “Y” SplitterH CB-3WT Rigid 3-way “T” SplitterI CB-HC Housing Clamp
J 121-CL Clear Plastic U Channel(sold in full 12-foot lengths only)
K CB-FILL-2 2-foot Filler CableL CB-FILL-10 10-foot Filler Cable
M CB-2C Basic Controller (150-foot max. run, variable speed flash)
#T100
PICTURECODE
1/2” PART #
3/8” PART # DESCRIPTION
1 MRC-50-BRS-4 (Brass)MRC-50-BA-4 (Brite Aluminum) Not Available 4 Ft. Reflector
2 121-CL 383-CL 12 Ft. Clear U-Channel
3 Not Available CSB-40-BA (Brite Aluminum)CSB-40-BLK (Black PVC) 4 Ft. Stair Bullnose
4 Not Available CW-40-BA (Brite Aluminum) 4 Ft. Carpet-To-Wall5 Not Available CC-40-BA (Brite Aluminum) 4 Ft. Carpet-To-Carpet
6 Not Available CF-40-BA (Brite Aluminum)CF-40-BLK (Black PVC) 4 Ft. Carpet-To-Floor
NA
CB2-PC6 CBM2-PC6 Replacement Power CordCB2-END CBM2-END Replacement End Cap CB-CLIP CBM-CLIP Mounting ClipNCT-400 NCT-400 Plastic Tie
INCANDESCENT LIGHTING ORIGINAL CUTTABLE
ROPE LIGHT120 V
Linear
I-474It is recommended that all electrical products be installed by a licensed electrician.
9/16”
1-1/
16”
7 VividColors Orange
CreamsicleYellow
Green
WarmWhite
Red
Blue
CoolWhite
“A New and Innovative Alternative
To Neon Lights!”
For interior signage & interior design.
Extremely durable.
Fieldcuttable
Unbreakable
lSee chart below for cut lengths.Extremely
flexible
PRODUCT FEATURES:
Energysaving.
Very easy to use.
Bend into letters and shapes.
Lasts 100,000 hours
100%patented
PART #BULB
SPACINGWATTS
PER FOOT COLORlCUT
LENGTHENFX-30-OR-24V 0.6” 1.44 Orange 3”ENFX-30-RD-24V 0.6” 1.80 Red 3”ENFX-30-YE-24V 0.6” 1.44 Yellow 3”ENFX-30-BL-24V 0.6” 1.44 Blue 4”ENFX-30-GR-24V 0.6” 1.44 Green 4”ENFX-30-CW-24V 0.6” 1.44 Cool White 4”ENFX-30-WW-24V 0.6” 1.44 Warm White 4”
PART # POWER SUPPLYENFX-TR-24V 120/24V-36VA Transformer
LED LIGHTINGNON-NEON LIGHTING24 V
Linear Replaces Glass Neon TubesSOLD IN 30’ COILS
I-475
Create a sign in no time!
Cut the aluminum
channel (TFX-6CHAN) into chicklets
to create letters and
shapes.
Use channel (TFX-6CHAN) to keep light
straight.
Aluminum channel
(TFX-6CHAN).
Pieces fit together to connect lengths & easily combining colors.
* Seal with GE Silicone or EquivalentACCESSORIES
Use heat gun on heat seal tape to waterproof connections.
21
Middle Connector Cable
2 Way - L Connector
3 Way - T Connector
4 Way - X Connector
Low Profile Power Connector W/ 3 Ft. Lead
HEAT SEAL TAPEEND CAP
6 FT.ALUMINUMCHANNEL
MULTIPURPOSE CUTTER
*silicone sealant
*silicone sealant
*silicone sealant
*silicone sealant
*silicone sealant
heat gun
Power Supply
Use heat gun on heat seal tape to waterproof connections.
4 Way - X Connector
*silicone sealant
*silicone sealant
*silicone sealant
CONNECTORSSo Simple!
Create a sign in no time!
Cut the aluminum
channel (TFX-6CHAN) into chicklets
to create letters and
shapes.
Use channel (TFX-6CHAN) to keep light
straight.
Aluminum channel
(TFX-6CHAN).
Pieces fit together to connect lengths & easily combining colors.
* Seal with GE Silicone or EquivalentACCESSORIES
Use heat gun on heat seal tape to waterproof connections.
21
Middle Connector Cable
2 Way - L Connector
3 Way - T Connector
4 Way - X Connector
Low Profile Power Connector W/ 3 Ft. Lead
HEAT SEAL TAPEEND CAP
6 FT.ALUMINUMCHANNEL
MULTIPURPOSE CUTTER
*silicone sealant
*silicone sealant
*silicone sealant
*silicone sealant
*silicone sealant
heat gun
Power Supply
It is recommended that all electrical products be installed by a licensed electrician.
Use heat gun on heat seal tape to waterproof connections.
4 Way - X Connector
*silicone sealant
*silicone sealant
*silicone sealant
CONNECTORSSo Simple!
TFX-END
TFX-CA-9
TFX-SPL
ENFX-TR-24V
TFX-2JN-24 (2 Ft. Long)TFX-6JN-24 (6 Ft. Long)
TFX-2L
TFX-3T TFX-4X
CT-2000
5 Interchangeable anvils in a convenient storage case.
LED LIGHTINGNON-NEON LIGHTING24 V
Linear Replaces Glass Neon Tubes
PRODUCT FEATURES:2 Styles Available!ULTRA PREMIUM - Use indoors or outdoors.• Lasts up to 100,000 hours.•Best used Outdoors - produced with a 2nd durable PVC jacket which makes ideal for the rigors of the outdoors (may also be used indoors).• Fully wrapped jacket reflects 100% of the light forward, thus allowing you to capture the full effect of these vivid colors!.• Less bulb depreciation.• 100% patented.STANDARD - For Interior Use Only!• Lasts up to 100,000 hours.•More economical option for signage and interior design.• 100% patented.
EnergyEfficient!•This unique LED product will save you up to 70% or more on you energy costs!
• Very low consumption - uses approximately 1.2 watts per foot or 180 watts per 150’!• Low heat - cool to the touch!
Long Life and Durability!•The LED’s are rated to last up to 100,000 hours.• 100% unbreakable!• Crush resistance is rated up to well over 450 PSI.• Unique, flexible, and soft PVC jacket, is durable and impervious to the elements.• 100% waterproof, when properly sealed.
Superior Brightness!•NO HOT SPOTS, uniform color and glow. This product provides a neon and fiber optic light brightness.
Flexible and Easy to Use!•Standard 100/120V-no drivers or transformers are necessary, just plug into the wall!• Field cuttable. Once the product is cut the UL approval does not apply.• Field bendable. This product can be bent to a minimum radius of 1.60”.• Various connector options are available for diverse applications.
Basedon300feetlengthforthecolorRedRegion Glass Neon LED Neon Flexible Annual Savings Cumulative Savings
USA Midwest(0.08$/k Wh) $1,839.60 $378.40 $1,461.20 $14,612.00 (in 10 years)
It is recommended that all electrical products be installed by a licensed electrician.
1”
5/8”
5/8”
Sizes Are Approximate
Fieldcuttable
lSee charts on page 477 for cut lengths.
“A New and Innovative Alternative
To Neon Lights!”
I-476
LED LIGHTINGNON-NEON LIGHTING120 V
Linear Replaces Glass Neon Tubes
I-477It is recommended that all electrical products be installed by a licensed electrician.
“A New and Innovative Alternative
To Neon Lights!”
PLEASE NOTE: Photo above is for reference only. Due to the nature of fluorescent colors, it is impossible to capture their
true characteristics in printed matter. We sell 1.5 ft. and 2.5 ft. working samples for color sensitive applications.
Orange CreamsicleYellowRed Blue Green Cool
WhiteWarmWhite
150 FT. ROLLS INCLUDE 5 SETS OF ACCESSORIES AT NO ADDITIONAL CHARGE:5 PIECES EACH OF POWER CONNECTOR, SPLICING CONNECTOR, POWER CORD, and END CAP
PART #’S LED BULBSPACING
WATTSPER FOOT COLOR
lCUT LENGTHULTRA PREMIUM STANDARD
NFXP-150-OR ENFX-150-OR .50” .96w/ft. Orange 2.5 ft.NFXP-150-RD ENFX-150-RD .50” 1.2w/ft. Red 2.5 ft.NFXP-150-YE ENFX-150-YE .50” .96w/ft. Creamsicle Yellow 2.5 ft.NFXP-150-BL ENFX-150-BL .50” 1.2w/ft. Blue 1.5 ft.NFXP-150-GR ENFX-150-GR .50” 1.2w/ft. Green 1.5 ft.NFXP-150-CW ENFX-150-CW .50” 1.2w/ft. Cool White (5500-6500K) 1.5 ft.NFXP-150-WW ENFX-150-WW .50” 1.2w/ft. Warm White (3000-3500K) 1.5 ft.
1.5 FT. and 2.5 FT. WORKING SAMPLES INCLUDE A FACTORY SEALED POWER CONNECTOR, CORD and END CAPPART #’S LED BULB
SPACINGWATTS
PER FOOT COLOR LENGTHULTRA PREMIUM STANDARDNFXP-25-OR ENFX-25-OR .50” .96w/ft. Orange 2.5 ft.NFXP-25-RD ENFX-25-RD .50” 1.2w/ft. Red 2.5 ft.NFXP-25-YE ENFX-25-YE .50” .96w/ft. Creamsicle Yellow 2.5 ft.NFXP-15-BL ENFX-15-BL .50” 1.2w/ft. Blue 1.5 ft.NFXP-15-GR ENFX-15-GR .50” 1.2w/ft. Green 1.5 ft.NFXP-15-CW ENFX-15-CW .50” 1.2w/ft. Cool White (5500-6500K) 1.5 ft.NFXP-15-WW ENFX-15-WW .50” 1.2w/ft. Warm White (3000-3500K) 1.5 ft.
30 FT. ROLLS INCLUDE A FACTORY SEALED POWER CONNECTOR, CORD, and END CAPPART #’S LED BULB
SPACINGWATTS
PER FOOT COLORlCUT
LENGTHULTRA PREMIUM STANDARDNFXP-30-OR ENFX-30-OR .50” .96w/ft. Orange 2.5 ft.NFXP-30-RD ENFX-30-RD .50” 1.2w/ft. Red 2.5 ft.NFXP-30-YE ENFX-30-YE .50” .96w/ft. Creamsicle Yellow 2.5 ft.NFXP-30-BL ENFX-30-BL .50” 1.2w/ft. Blue 1.5 ft.NFXP-30-GR ENFX-30-GR .50” 1.2w/ft. Green 1.5 ft.NFXP-30-CW ENFX-30-CW .50” 1.2w/ft. Cool White (5500-6500K) 1.5 ft.NFXP-30-WW ENFX-30-WW .50” 1.2w/ft. Warm White (3000-3500K) 1.5 ft.
LED LIGHTINGNON-NEON LIGHTING120 V
Linear Replaces Glass Neon Tubes
I-478It is recommended that all electrical products be installed by a licensed electrician.
A B, C D
E F G
H I J
“A New and Innovative Alternative
To Neon Lights!”
Linear Installation1. Aluminum Channel NFX-6CHAN.2. Apply an adhesive silicone between the channel base on fixture housing to prevent slippage and stretching over time.
Curve Installation1. Linear LED Lighting.2. Pre-cut aluminum channel to 2” pcs. and screw to surface.
Cutting Mark1. Linear LED Lighting must be cut on the indicated mark.
180° Installation1. Linear LED Lighting.2. Pre-cut aluminum channel to 2” pcs. and screw to surface.
90° Installation1. Linear LED Lighting.2. Pre-cut aluminum channel to 2” pcs. and screw to surface.
1
2
1
2 21
Installation
*Sealw/GESiliconeorEquivalent
**
*
*
ACCESSORIES FOR ULTRA PREMIUM and STANDARD NON NEON FLEXIBLE LED LIGHTING
PART # DESCRIPTIONA NFX-PWR5 5 Ft. Long Powercord and ConnectorB NFX-2JN 2 Ft. Long Middle Connector CableC NFX-6JN 6 Ft. Long Middle Connector CableD NFX-2L L Connector - 2 WayE NFX-3T T Connector - 3 WayF NFX-4X X Connector - 4 WayG NFX-SPL Heat Shrink To FitH NFX-END End CapI NFX-6CHAN 6 ft. Long Aluminum Channel
J CT-2000 Multipurpose Cutter w/5 Interchangeable anvils in a convenient storage case.
LED LIGHTINGNON-NEON LIGHTING120 V
Linear Replaces Glass Neon Tubes
DISTANCE BETWEEN LED’S
1.5”
1.2”1/16”PANEL
THICKNESS
Decorative PanelsLightboxes
Lightbox not included
Ideal Backlighting
For:
Unique triangular design allows evenly balanced illumination
Balanced LightDistribution
100% CONNECTABLE!NO SOLDERINGREQUIRED!
Product Profile:
NO HOT SPOTS!
BONU$ FEATURE! MINIMAL CAN DEPTH REQUIRED AT 1.5” No hot spots seen on the graphic! This will $ave money on material co$t$, while keeping transport co$t$ to a minimum.
6 INTERLOCKING/CONNECTABLESIZES TO CHOOSE FROM!
12” x 4” PANEL
12” x 2” PANEL
12” x 2.4” PANEL
4” x 2.4” PANEL
2” x 2.4” PANEL
12” x 12” PANEL
1.5”MINIMUM
CANDEPTH
REQUIRED
ONLY
PRODUCT FEATURES:•3yr.Warranty•Energyefficient•Manufacturedwithconstantcurrenttechnologyfor maximumlifeexpectancyof50,000hourswithminimal tonolightdegradation•Virtuallyshatterprooffiberglassconstruction
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
SMD3528 chip120˚
Average Rated For50,000Hours
CW=80
7500K
CoolWhite
WarmWhite
PureWhite
720Lumensor5500Luxpersquarefootat1.5”candepth.
Each panel is
only 1/16” thick!!!!
It is recommended that all electrical products be installed by a licensed electrician.
I-479
SIGNAGE & DISPLAY LIGHTS
TRI-MOD BACKLIGHTING PANELS24 V
I-480
F
E
D
C
6 INTERLOCKING/CONNECTABLE SIZES TO CHOOSE FROM!
No. LED Chips:120pcs.Total Wattage:6watts
12” x 4” PANEL
No. LED Chips:40pcs.Total Wattage:2watts
12” x 2” PANEL
No. LED Chips:20pcs.Total Wattage:1watt
12” x 2.4” PANEL
No. LED Chips:24pcs.Total Wattage:1.2watts
4” x 2.4” PANEL
No. LED Chips:8pcs.Total Wattage:.4watts
2” x 2.4” PANEL
No. LED Chips:4pcs.Total Wattage:.2watts
12” x 12” PANELA
B
It is recommended that all electrical products be installed by a licensed electrician.
PANEL SIZESSIMPLY CONNECT FOR A VARIETY OF SIGN SIZES!
18”
19”
POWERSUPPLY
LED-TRIMOD-3A
A
B
C
D
E
F
D
E
F
D
E
F
POWERDISTRIBUTOR
POWERLINK CABLE
NOTE: Light panels may be securely fastened with #6 plastic washers and
#6 screws, NOT INCLUDED. SEE PAGE 267
PART #LED-TRIMOD-A
PART #LED-TRIMOD-B
PART #LED-TRIMOD-C
PART #LED-TRIMOD-D
PART #LED-TRIMOD-E
PART #LED-TRIMOD-F
SIGNAGE & DISPLAY LIGHTS
TRI-MOD BACKLIGHTING PANELS24 V
I-481
It is recommended that all electrical products be installed by a licensed electrician.
Plug-In6’ Cable
POWER SUPPLY (REQUIRED)
POWER CABLES (REQUIRED)
6’ Lead Wire
Plug-In6’ Cable
POWER ACCESSORIES
POWER CABLE
• Used when only a single run is required• Directly connects power supply to light panel
POWER LINK CABLE
• 36W maximum per each power link cable connected to a power distributor• Connects from power distributor to light panel
6 PORT POWER DISTRIBUTOR
• Used when more than one run is required• Maximum 36W per port - DO NOT EXCEED TOTAL WATTAGE OF POWER SUPPLY• Connects power supply to power link cable
Area 1
Area 2
Area 3
A A
B B
D
E
POWERLINK CABLE
POWERLINK CABLE
POWERLINK CABLE
POWERDISTRIBUTOR
POWERSUPPLY
LED-TRIMOD-3A(Pictured)
PART # LENGTHLED-TRIMOD-PWR 16”
PART # LENGTHLED-TRIMOD-PWR6 6”LED-TRIMOD-PWR18 18”LED-TRIMOD-PWR39 39”
PART # LENGTHLED-TRIMOD-DIS6 6”LED-TRIMOD-DIS18 18”LED-TRIMOD-DIS39 39”
1 Amp 24V Power Supply(Constant Voltage)2.95”L x 1.4”W x 2.04”HMaximumWatts: 24LED-TRIMOD-TR-1A
3 Amp 24V Power Supply(Constant Voltage)5.188”L x 2.18”W x 1.26”HMaximumWatts: 84LED-TRIMOD-TR-3A
SIGNAGE & DISPLAY LIGHTS
TRI-MOD BACKLIGHTING PANELS24 V
I-482It is recommended that all electrical products be installed by a licensed electrician.
Style 33 RGB LED SMD5050 Modules
2-1/2” 2-1/2”
Module Dimensions: 3.19”L x .787”W x .393”D20 Modules per 6 ft. length, 3 Modules per ft. (14.4 watts per length)
Can Depth: 5”-6”
ULTIMATE ADVANCED
• Allows user the original 7 colors and every shade in between with the ability to PAUSE at each shade.• Program to change at variable speeds or remain static.• Capable of going as fast as a strobe effect or as slow as a minute and a half per color change.
POCKET SIZE
< LEDCONTROLLER
< REMOTE
LISTED 12V/5.0A 60 WATT HARDWIRE (Constant Voltage)
RGB Technology Allows You Endless Possibilities of Colors
LISTED 12V/3A 36 WATT (Constant Voltage)
LISTED 12V/5.0A 60 WATT (Constant Voltage)
• IP 67 (waterproof when properly installed).• Suitable for indoor or outdoor use without exposure to direct sunlight & avoid submerging for more than 30 minutes.
SUITABLE FOR WET
LOCATIONS
LIGHTING SPECIFICATIONSBEAM SPREAD LUMINESCENCE
COLOR LUMENSRed 6
Green 12Blue 3120˚
Average Rated For50,000Hours
(1) Fastens Mechanically w/screws (not supplied) or (2) Use peel & stick tape
(1) (2)
RGB LED CONTROLLER & REMOTE CONTROL SET (Required for RGB ONLY)
ACCESSORIES POWER SUPPLIES (Required)
4-1/2”L x 1-3/4”W x 1-3/16”H
5-1/4”L x 2-1/4”W x 1-3/16”H
6-3/8”L x 1-3/8”W x 1-1/4”H
4-3/8”L x 2-3/8”W x
1”H
• New modern look, compact design • Program to change at variable speed or remain static• Capable of going as fast as a strobe effect or as slow as a minute and a half per color change.
STANDARD
< LEDCONTROLLER
2-1/2”W x 1”H x 2-3/8”L
18”L input wire18”L
output wire
POCKET SIZE < REMOTE
EASY CONNECTION
With our Exclusive end-to-end connector
7 Solid ColorsRED BLUE PURPLE WHITE
GREEN YELLOW CYAN
18”L output wire
18”L input wire
6’L input wire 5’L output wire
6’L input wire 5’L output wire
2’L input wire 2’L output wire
STYLE PART # COLOR DESCRIPTION LENGTH# OF LED
CHIPSTOTAL
WATTAGE
3 LED-CL2-RGB RGB 20 pc. module string 6’ 3 .72W/MOD
14.4W/L
LED-CL-TR36W LED-CL-TR60W LED-CL-TR60W-W
LED-CL-CRLED-CL-CRM
RGBCHANNEL LETTER MODULES
LED LIGHTING12 V
Sign/DisplayMaterial: Styrene w/Surface Epoxy Power Supply
NEW!
I-483It is recommended that all electrical products be installed by a licensed electrician.
Style 12 LED SMD5050 Modules
Style 24 LED SMD5050 Modules
2-1/2” 2-1/2”
Module Dimensions: 1.25”L x .630”W x .393”D20 Modules per 6 ft. length, 3 Modules per ft. (9.6 watts per length)
Can Depth: 5”-6”2-1/2” 2-1/2”
Module Dimensions: 1.22”L x 1.22”W x .393”D20 Modules per 6 ft. length, 3 Modules per ft. (19.2 watts per length)
Can Depth: 8”
Styles To Choose From:
3
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
120˚
Average Rated For50,000Hours
CW=75COLOR LUMENS
Cool White 30Red 24
Yellow 24Green 48Blue 125500K
CoolWhite
WarmWhite
PureWhite
SAMPLE MODULES
Solid Colors
RED
YELLOW
GREEN
BLUE
STYLE PART # *COLOR DESCRIPTION LENGTH# OF LED
CHIPSTOTAL
WATTAGE1 LED-CL2-* Cool White
Red, Yellow,Green, Blue
20 pc. module string6’
2 .48W/MOD 9.6W/L
2 LED-CL4-* 20 pc. module string 4 .96W/MOD 19.2W/L
STYLE PART # COLOR DESCRIPTION LENGTH# OF LED
CHIPSTOTAL
WATTAGE
1 LED-CL2-SST 3 each of Cool White, Red, Yellow,Green, Blue
2 module sample string w/3 pcs. of each color per string 6’
2 .48W/MOD 9.6W/L
2 LED-CL4-SST 4 module sample string w/3 pcs. of each color per string 4 .96W/MOD 19.2W/L
ULTRA BRIGHTCHANNEL LETTER MODULES
LED LIGHTING
Super BrightLight OutputSuper BrightLight Output
12 VSign/Display
Material: Styrene w/Surface Epoxy
NEW!
2 MODULE
I-484
Constant Voltage power supply included.
Remove cover to place graphic
Cover
YourGraphic
BackPanel
COUNTER TOP WALL MOUNT1” Depth
Comes with4 standoffs, 1/2” Dia. x 1” Long
LIGHTING SPECIFICATIONS COLOR TEMPERATURE LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For50,000Hours
COLOR LUMENSCLB-LED-0811-W 186CLB-LED-1117-W 93CLB-LED-1620-W 102CLB-LED-2228-W 121CLB-LED-2436-W 167CLB-LED-0811-C 186CLB-LED-1117-C 93
CW=70
6100K
CoolWhite
WarmWhite
PureWhite
Sleek Thin
Design
Plug & Play
Counter Top Leg
2”
Available from8.5” x 11” to
24” x 36”
PRODUCT FEATURES:• Super thin under 3/8”• Available in wall mount & counter top• Power supply included
Available for either wall mount (-w) or counter top (-c) applications.
PART #COLOR TEMP
GRAPHIC SIZE
REVEALDIMENSIONS
OVERALLDIMENSIONS
# OF LEDCHIPS
TOTAL WATTAGE
CLB-LED-0811-W
Cool White
8.5” x 11” 7” x 9.5” 12.83” x 15.35” 24 24WCLB-LED-1117-W 11” x 17” 9.5” x 15.5” 15.35” x 21.34” 42 42WCLB-LED-1620-W 16” x 20” 14.5” x 18.5” 20.31” x 24.33” 54 54WCLB-LED-2228-W 22” x 28” 20.5” x 26.5” 26.34” x 32.32” 60 60WCLB-LED-2436-W 24” x 36” 22.5” x 34.5” 28.35” x 34.33” 66 66WCLB-LED-0811-C 8.5” x 11” 7” x 9.5” 12.83” x 15.35” 24 24WCLB-LED-1117-C 11” x 17” 9.5” x 15.5” 15.35” x 21.34” 42 42W
CRYSTAL LIGHT BOXPower Supply
LED LIGHTING
Super BrightLight OutputSuper BrightLight Output
12 VSign
Material: Clear Acrylic
I-485
COMES READY TO USE:MOUNTING HARDWARE, ACRYLIC COVER &
POWER SUPPLY INCLUDED!
ULTRA THIN - only 13/16” thick; attractive 1” Wide
beveled edge profile.
Constant Current power supply included.
On/Off Swtich
• Plug & Play• Pre-Assembled
LIGHTING SPECIFICATIONS COLOR TEMPERATURE LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For100,000Hours
COLOR LUMENSFF-LED-0811 186FF-LED-1117 93FF-LED-1620 102FF-LED-2228 121FF-LED-2436 167
CW=80
10,000K
CoolWhite
WarmWhite
PureWhite
PRODUCT FEATURES:• Easy front load feature• Aluminum composite back included• On/off switch
PART #COLOR TEMP
GRAPHICSIZE
REVEALDIMENSIONS
OVERALLDIMENSIONS
# OF LEDCHIPS
TOTAL WATTAGE
FF-LED-0811
Cool White
8.5” x 11” 8.25” x 10.75” 10.12” x 12.64” 15 24WFF-LED-1117 11” x 17” 10.75” x 16.75” 12.64” x 18.62” 24 24WFF-LED-1620 16” x 20” 15.75” x 19.75” 17.6” x 21.61” 27 24WFF-LED-2228 22” x 28” 21.75” x 27.75” 23.62” x 29.61” 60 24WFF-LED-2436 24” x 36” 23.75” x 37.75” 25.63” x 37.6” 72 60W
LED LIGHTINGSNAP EASE FRONT LOADING
FRAME LED LIGHT BOX Power SupplySuper BrightLight OutputSuper BrightLight Output
12 VSign
Material: Clear Anodized Aluminum Frame
I-486
cIelo® Xl
Imago®
paneo®
mount to panel by hooking the light
fixture into a base unit affixed
invisibly to the rear edge of the
panel.
TWO-PIECE BRACKET ASSEMBLY & MOUNTINGSTURDY CLAMP MECHANISM
FITS UP TO 3” THICK MATERIAL
Top panel moUnTeD
SURFace moUnTeD
clampS - no ScReW moUnTIng
Lamps Sold Separately
Lumens210
60˚Beam Spread
75 W Halogen w/Dichroic Reflector BulbLumens
1260
50˚Beam Spread
EASY TO USE! Each fixture is uniquely designed for ease of fixation.LIGHTWEIGHT BUT EXTREMELY DURABLE! All stainless steel construction with nickel plated components and highly polished shades of the lighthead.SAFE FOR MUSEUM PIECES! Halogen bulbs with dichroic reflector. 80% of potentially harmful heat is reflected to the rear of the lighthead while 100% of the light shines on the subject matter.NO TRANSFORMER REQUIRED! 120V-Simply plug into any outlet. Black power cord is 10 feet long with 3 prong plug.VERSATILE and PORTABLE! The lighthead clamp can be adjusted to various angles for the greatest lighting potential of any exhibit.
5500K-6000K
CoolWhite
WarmWhite
PureWhite
3W GU10 Bulb (3 x 1W LED’s)
paRT #205-p
paRT #210-I
B054
leD-gU10-cW
paRT #200X-cl
LIGHT FIXTURE
HALOGEN / LED LIGHTING120 V
Exhibit
®
I-487
See series #3 on page 497for more options and details.
NOT TRADE SHOW
APPROVED
FIXTURES ARE TRADE SHOW APPROVED WHEN USED WITH A LENSED “PAR” OR “MR” TYPE BULB UNDER 75 WATTS.
PIPE CLAMP AVAILABLE(Purchase Separately)
Lamps Sold Separately
See series #4 on page 497 for more options and details.
Lamps Sold Separately
See series #4 on page 497for more options and details.
Lamps Included. ForReplacement Lamps
It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:• Lowvoltage(12V),3prong, 10’cord,60Wplug-in transformer,20”flexiblearm•UseMR-16-CLlamp (not included)
PRODUCT FEATURES:• Lowvoltage(12V),3prong, 10’cord,26”flexiblearm•Usemediumbaselamp 150Wmax.(not included)
PRODUCT FEATURES:• Periscopearm22”to32”,line voltage(120V),3prong,10’ cord,includes200Wlamp
PRODUCT FEATURES:• Periscopearm22”to32”,line voltage(120V),3prong,10’ cord,includes200Wlamp•Usemediumbaselamp 150Wmax.(not included)
Lamps Sold Separately
PRODUCT FEATURES FOR SL-SERIES:• 15’longcordsetwith3pronggroundedplug•Clamps0”to2-1/4”thickpanel• Swivelactionatshade:180°Vertical, 340°Horizontal• Arm:16”longx1/2”diameter
NOT TRADE SHOW
APPROVED
Shade:6-7/8”Lx3-1/2”Wx2-5/8”HUsesaT3doubleendedbulb,300Wattmaximum
Shade:2-1/2”Dx4”HUsesaPAR-16bulb,75Wattmaximum
Lamps Sold SeparatelyHALOGEN BULB FOR SL-605-BK
HALOGEN BULB FOR SL-561-BK
EDL-SERIES INCLUDES STANDARD CLAMP FOR FLAT SURFACES 1/2” TO 2-1/2” WIDE
EDL-214B (Black)EDL-214W(White)
MR16-CL
EDL-024B (Black)EDL-024W(White)
EDL-150B (Black)EDL-150W(White)
EDL-188B (Black)EDL-188W(White)
EDL-DLC-PB (Black), EDL-DLC-PW(White)Forupto2-1/2”pipe.
PAR-20PAR-30
PAR-20PAR-30PAR-38H-200W
SL-605-BK (Black) SL-561-BK (Black)H-300W 60-PAR-H-NFL
DISPLAY LIGHTS
HALOGEN LIGHTING12 V/120 V
ExhibitMaterial:
Aluminum w/Steel EDL-SERIES ONLY
I-488
GOOSE NECK STYLE19” FLEXIBLE ARM
180º
ARMROTATES
FLEXIBLE &
ADJUSTABLE
FULLY ADJUSTABLE LIGHT HEAD
90º
350º
180º
ARMROTATES
ARC STYLE24” CURVED ARM
GEAR-STYLE ADJUSTERANGLES ARM FOR DESIRED ILLUMINATION & LOCKS INTO PLACE CLAMP
ADJUSTS FOR
7/8”-3-3/8’ PANELS
It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:• Fully adjustable light head allows for great flexibility in a variety of applications.• Display arm can also be adjusted at a variety of angles by using the gear adjuster to lock into place.• Adjustable C-clamps will accommodate 7/8” to 3-3/8” thick panels.• 12V power supply included with 6’ power cord.• Steel construction in Satin Chrome finish.* Available in cool white or warm white, please specify.
LIGHTING SPECIFICATIONS
LED
COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLORRENDERINGINDEX
60˚
Average Rated For50,000Hours
CW=75WW = 80
6500K3600K
CoolWhite
WarmWhite
PureWhite COLOR LUMENS
Cool White 210Warm White 150
HALOGEN
BEAM SPREAD LUMINESCENCE
36˚
Average Rated For2,000Hours
COLOR LUMENSCool White 1700
PART # DESCRIPTIONLED-ARC-SC* 24” curved arm, 3W High Powered LED bulb
LED-GNECK-SC* 19” flexible arm, 3W High Powered LED bulbHAL-ARC-SC 24” curved arm, 50W Halogen bulb
HAL-GNECK-SC 19” flexible arm, 50W Halogen bulb
“ARC-IT” LIGHTS
HALOGEN / LED LIGHTING12 VExhibit
I-489It is recommended that all electrical products be installed by a licensed electrician.
ACCESSORIES
Connects to outlet box allowing track to be powered anywhere along the length of the track.
FLOATING CANOPY
Used to supply power from the source at the junction of two tracks.
STRAIGHT LINE POWER CONNECTOR
Used for direct wiring from conduit through the ceiling.
LIVE END CONNECTOR
Track supplied with 2 end caps per length.
TRACK (Halo Compatible)
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
35˚
Average Rated For50,000Hours
COLOR LUMENSCool White 245 CW=80
CoolWhite
WarmWhite
PureWhite
4500K
PRODUCT FEATURES:• Allows you to add LED track heads to any existing Halo track system• Rotates 360˚• Equivalent to 35W halogen MR16 bulb• Track head has built-in power supply
“L” LEFT/RIGHT ANGLE CONNECTOR
Used to join two track sections to make a 90° angle.
6-1/8”
2-5/8”
PART # COLORLED-FLOCAN-SN Satin Nickel
PART # COLORLED-LIVEND-SN Satin Nickel
PART # COLORLED-STRCON-SN Satin Nickel
PART # DESCRIPTION
LED-TRACK-SN-6 6’ Satin Nickel 120V Track
LED-TRACK-SN-8 8’ Satin Nickel 120V Track
PART #COLOR TEMP FINISH
# OF LEDCHIPS
TOTAL WATTAGE
LED-4TLIG-SN Cool White Satin Nickel 4 4 x 1W (4W)
PART # COLORLED-LCON-SN Satin Nickel
TRACK LIGHT
LED LIGHTING
Super BrightLight OutputSuper BrightLight Output
120 VTrack
Material: Metal
NEW!
I-490It is recommended that all electrical products be installed by a licensed electrician.
• These fixtures do not use a transformer, and work with screw-in PAR type bulbs
WL-H178B-*
Use with a PAR-20 bulb(75 Watt max.)Dimensions:A = 2”B = 1-3/4”C = 3-1/2”
WL-H763-*Use with a PAR-20 bulb(50 Watt max.)Dimensions:A = 4-1/8”B = 2-3/4”C = 7-1/4”
WL-H703-*
Use with a PAR-30 bulb(100 Watt max.)Dimensions:A = 6-1/2”B = 4-1/2”C = 9-1/2”
WL-H718-*
Use with a PAR-30 bulb(100 Watt max.)Dimensions:A = 7”B = 4-1/2”C = 9”
WL-H180-*Use with an UnlensedMR-16 bulb (50 Watt max.)Dimensions: A = 4”B = 2-1/8”C = 5-5/8”
WL-H809-*Use with an UnlensedMR16 bulb (50 Watt max.)Dimensions: A = 3-1/8”B = 2-1/4”C = 5-1/4”
WL-H204-*Use with MR16 bulb (50 Watt max.)
Dimensions: A = N/AB = N/AC = 25-13/16”
• These fixtures use a built-in electronic transformer, and work bi-pin MR 16 type bulbs
Juno or Lightolier compatible fixtures are available on request, please inquire.
Lamps Sold SeparatelySee series #3 on page 497 for more options and details.
PAR-20- . PAR-30- . PAR-38-
*COLOR OPTIONSBlack (BK) or White (WH)
*COLOR OPTIONSBlack (BK) or White (WH)
Black Mount w/Brush Nickel (BB)White Mount w/Brush Nickel (BW)
*COLOR OPTIONSBlack (BK) or White (WH)
*COLOR OPTIONSBlack (BK) or White (WH)
WL-H793-ABAntique BronzeUse with a PAR-20 bulb(50 Watt max.)* PAR-30 & PAR-38 also available, please inquire.
Dimensions:A = 5-1/2”B = 4-1/4”C = 8-1/8”
WL-H799-ABAntique BronzeUse with a PAR-38 bulb(150 Watt max.)* PAR-20 & PAR-30 also available, please inquire.
Dimensions:A = 7-3/4”B = 6-1/8”C = 10-5/8”
*COLOR OPTIONSBlack (BK) or White (WH)
*COLOR OPTIONSBlack (BK) or White (WH)
*COLOR OPTIONSBlack (BK) or White (WH)
Brush Nickel (BN)Lamps Sold Separately
See series #3 on page 497 for more options and details.MRE-11(20W) MRE-16(50W)
HALOGEN LIGHTING
• Line and low voltage heads can be mixed together on one track• Low voltage heads have built-in electronic transformers with all polycarbonate plastic housings• Line and low voltage heads are compatible with most regular incandescent dimmers
HALO COMPATIBLE
120 VTrack
Material: Aluminum w/Steel
12 VTrack
Material: Aluminum w/Steel
LINE AND LOW VOLTAGE LIGHTS
I-491It is recommended that all electrical products be installed by a licensed electrician.
1. Track and Power Connectors
CUSTOM EXTENDED TRACKHEADS
• Extend drop of track-heads. Only available as a complete unit. Will be made per order at factory. 6”, 12”, 18”, 24”, 36”, & 48” extensions are available. No minimum order required. Call for quotation.
TRACK• 2 end caps supplied with each length.• Can be installed on sheetrock, plaster, wood or suspended ceilings.• Field cuttable.
15’ PLUG-IN POWER CORD
• Used with any power connector to wire a section of track as a portable unit.
FLOATING CANOPY
• Connects to outlet box allowing track to be powered anywhere along the length of the track.
LIVE END CONNECTOR
• Used for direct wiring from conduit through the ceiling.
FLEXIBLE TRACK CONNECTOR
• Connects two track sections at variable angles from 60° to 180°.
“L” LEFT/RIGHT ANGLE CONNECTOR
• Used to join two track sections to make a 90° angle.
“T” 3-WAY CONNECTOR
• Used to join three track sections to make a “T” configuration.
“X” 4-WAYCONNECTOR
• Used to join four track sections to make a “X” configuration.
SUSPENSION KITS
• Supports the weight of the track. Parts & instructions included.
STRAIGHT LINE POWER CONNECTOR
• Used to supply power from the source at the junction of two tracks.
STRAIGHT LINE CONNECTOR• Used to join two sections of track.
• This hardware is applicable to both the line-volt and low-volt track heads and pendant light• A power connector must be purchased separately from the track
2. Track Joiners with Power Connectors
3. Track Joiners w/out Power Connectors
4. Track Suspension and Track Head Extensions
Our selection is HALO COMPATIBLE; Juno or Lightolier compatible fixtures are available on request, please inquire.
DEAD END STRAIGHTLINE CONNECTOR• Used as connector where power in not to go through.
*COLORS AVAILABLE: Black (BK), White (WH), Antique Bronze (AB), Brushed Nickel (BN)
PART # COLORWL-HCORD-BK BlackWL-HCORD-WH White
PART # SIZEWL-SK18-*(BK) or (WH) 18”WL-SK18-*(AB) or (BN) 18”WL-SK24-*(BK) or (WH) 24”WL-SK24-*(AB) or (BN) 24”WL-SK36-*(BK) or (WH) 36”WL-SK36-*(AB) or (BN) 36”WL-SK48-*(BK) or (WH) 48”WL-SK48-*(AB) or (BN) 48”
PART # LENGTHWL-HT6-*(BK) or (WH) 6’WL-HT6-*(AB) or (BN) 6’WL-HT8-*(BK) or (WH) 8’WL-HT8-*(AB) or (BN) 8’
PART #WL-HFC-*(BK) or (WH)WL-HFC-*(AB) or (BN)
PART #WL-HLE-*(BK) or (WH)WL-HLE-*(AB) or (BN)
PART #WL-HI-PWR-*(BK) or (WH)WL-HI-PWR-*(AB) or (BN)
PART #WL-HFLX-*(BK) or (WH)WL-HFLX-*(AB) or (BN)
PART #WL-HT-*(BK) or (WH)WL-HT-*(AB) or (BN)
PART #WL-HL-*(BK) or (WH)WL-HL-*(AB) or (BN)
PART #WL-HX-*(BK) or (WH)WL-HX-*(AB) or (BN)
PART #WL-HI-*(BK) or (WH)WL-HI-*(AB) or (BN)
PART #WL-HI-DEC-*(BK) or (WH)WL-HI-DEC-*(AB) or (BN)
HALOGEN LIGHTING120 V/12 V
TrackLINE AND
LOW VOLTAGE LIGHTS
I-492
Starter Inductive Ballast
Step 1: Remove the fluorescent LED tube
Step 2: Install the LED tube
T8Step 1: Remove the fluorescent LED tube
Step 3: Install the LED tube
T8 Electronic Ballast
Step 2: Remove or bypass the ballast
Existing fixture with the inductive ballast and starterSCENARIO 1:
Existing fixture with the electronic ballast (with circuit diagram)SCENARIO 2:
No need to remove the starter
& inductive ballast
Fluorescent Lamp LED Tube
Electronic BallastElectronic Ballast
G13 G13 G13 G13
12 1
2
3
Circuit DiagramAC 110V-265V/50-60Hz AC 110V-265V/50-60Hz
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
140˚
47.16”
47.48”47.80”
Clear
Frosted
It is recommended that all electrical products be installed by a licensed electrician.
Average Rated For50,000Hours
COLOR LUMENSCool White (FR) 1370Cool White (CL) 1710Warm White (FR) 1090Warm White (CL) 1360
CW=75WW = 80
5000K-6000K3500K
CoolWhite
WarmWhite
PureWhite
PRODUCT FEATURES:• Replaces fluorescent lamps• Will not shatter• Long lasting, thus requiring less bulb changes
288 SMD3020
LED’sPER TUBE!!
PART #COLOR TEMP FINISH LENGTH
# OF LEDCHIPS
TOTAL WATTAGE
LED-T848-CW-CL Cool White Clear Lens4’ 288 18LED-T848-CW-FR Frosted Lens
LED-T848-WW-CL Warm White Clear LensLED-T848-WW-FR Frosted Lens
LED LIGHTING
T8 TUBE LIGHTSSuper BrightLight OutputSuper BrightLight Output
120 VBulbs
Material: Aluminum w/Polycarbonate Lens
I-493
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
BI-PIN BULB (12V)PRODUCT FEATURES:• Economically upgrades existing 20W
Halogen fixtures to 0.8W LED
GU10 BULBS (120V)
Shown with our Klem exhibit
light, located on page 486
PAR BULBS
5 LED x 1W 3-1/2” HT. 2-1/2” Dia.
PAR30
9 LED x 1W 3-1/2” HT. 3-11/16” Dia.
PAR38
15 LED x 1W 5-1/4” HT. 4-3/4” Dia.
PAR20
REPLACE YOUR INEFFICIENT HIGH HEAT HALOGEN, THAT ONLY LASTS FOR 2000 HOURS!
20˚
26˚
PAR 30PAR 20PAR 38
Average Rated For50,000Hours120˚
CW=75
6500K
CoolWhite
WarmWhite
PureWhite
COLOR LUMENSCool White 80
COOLUPGRADE
WHILESUPPLIES
LAST
From This...
...ToThis
COLOR LUMENSCool White 210Warm White 150
CW=75WW=80
6000K3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
60˚
CW=75WW=80
COLOR LUMENSCool White 210Warm White 150
6000K3000K
CoolWhite
WarmWhite
PureWhite
Average Rated For50,000Hours
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX
60˚
CW=75WW=80
COLOR LUMENSCool White 210Warm White 150
6000K3000K
CoolWhite
WarmWhite
PureWhite
Average Rated For50,000Hours
Average Rated For10,000Hours
MRE16 BULBS (12V)
PRODUCT FEATURES:• Built in heat sink• Energy efficient
PRODUCT FEATURES:• Ultra bright• Built in heat sink• Economical• Long lasting• Low wattage
PRODUCT FEATURES:• Built in heat sink• Energy efficient
PART #LED-G4-12V
PART # COLORTOTAL
WATTAGELED-MRE16-CW Cool White 3WLED-MRE16-WW Warm White
PART # COLOR# OF LED
CHIPSTOTAL
WATTAGELED-PAR20-CW Cool White 5 5LED-PAR20-WW Warm WhiteLED-PAR30-CW Cool White 9 9LED-PAR30-WW Warm WhiteLED-PAR38-CW Cool White 15 15LED-PAR38-WW Warm White
PART # COLORTOTAL
WATTAGELED-GU10-CW Cool White 3WLED-GU10-WW Warm White
LED BULBSBI-PIN, MRE16, GU10, PAR TYPE12 V / 120 V
Bulbs
I-494
8W LED= 35W Par 20 Halogen
18W LED= 45W Par 38 Halogen
9W LED= 35W Par 30 Halogen
13W LED= 35W Par 30 Halogen
11W LED= 50W Par 38 Halogen
GENERATION 3 DIMMABLE LED PAR BULBS
24˚
24˚
40˚
24˚
25˚LED-PAR30D-NF
40˚
25˚LED-PAR38D-NF
4-3/4”
4-3/4”
5-1/8”
3-3/4”
4-5/8”
5-3/8”
2-1/2”
3-3/8”
3-3/4”
3-5/8”
IP65, suitable in damp locations with proper installation.
IP65, suitable in damp locations with proper installation.
LED PAR 20
LED PAR 38
LED PAR 30 (Dimmable) LED PAR 38 (Dimmable)
LED PAR 30
Average Rated For20,000Hours
CW=75WW=75
6000K3000K
CoolWhite
WarmWhite
PureWhite
COLOR LUMENS12V 3024V 35
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD LUMINESCENCE
COLORRENDERINGINDEX Average
Rated For20,000Hours
CW=75WW=75
6000K3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD LUMINESCENCE
COLORRENDERINGINDEX
Average Rated For20,000Hours
CW=75WW=75
6000K3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD LUMINESCENCE
COLORRENDERINGINDEX
Average Rated For40,000Hours
WW=80
3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD LUMINESCENCE
COLORRENDERINGINDEX Average
Rated For40,000Hours
WW=80
3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD LUMINESCENCE
COLORRENDERINGINDEX
COLOR LUMENSCool White 35Warm White 30
COLOR LUMENSWarm White 25
PART #/LUMENSLED-PAR30D-NF
420LED-PAR30D-FL
430
PART #/LUMENSLED-PAR38D-NF
575LED-PAR38D-FL
565LED-PAR30D-FL LED-PAR38D-FL
PART # COLOR BASE WATTSLED-PAR20TL-DL Day Light E26 8WLED-PAR20TL-WW Warm White
PART # COLOR BASE WATTSLED-PAR38TL-DL Day Light E26 18WLED-PAR38TL-WW Warm White
PART # COLOR BASE WATTSLED-PAR30D-NF Warm White E26 9WLED-PAR30D-FL
PART # COLOR BASE WATTSLED-PAR38D-NF Warm White E26 11WLED-PAR38D-FL
PART # COLOR BASE WATTSLED-PAR30TL-DL Day Light E26 13WLED-PAR30TL-WW Warm White
LED BULBS120 V
BulbsPAR TYPE NEW!
I-495
0.8W= 3W Festoon
0.7W= 3W Wedge 2W= 5W Halogen
0.6W= 3W JC Bi-Pin
LED COLOR CHANGING GLOBE
LED WEDGE BASE LED M16 MULTI BEAM
LED GLOBE
Adjustable Dial For Multiple
Beam Angles: 15º, 20º, 25º, 30º,
35º, 40º
Wet Usage Ok With Use Of Waterproof Socket
Wet Usage Ok With Use Of Waterproof Socket
Landscape Pendant/ Downlights
Signs/Display
High PowerLED Chip
Landscape Pendant/ Downlights
Signs/Display
High PowerLED Chip
Landscape Pendant/ Downlights
Signs/Display
High PowerLED Chip
Ideal for Amusement Parks, Hotels and
Sign & Display.
LED FESTOON LED JC BI-PIN
Ideal for Amusement Parks, Hotels and Sign & Display.
Changes Colors Automatically,No Controller Required.
Average Rated For30,000Hours
WW=72
3000K
CoolWhite
WarmWhite
PureWhite
COLOR LUMENSDay Light 200
Warm White 240
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
LUMINESCENCE
COLORRENDERINGINDEX
15˚-40º
Average Rated For25,000Hours
WW=75
3000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
BEAM SPREAD
COLORRENDERINGINDEX
Average Rated For50,000Hours
8000K
CoolWhite
WarmWhite
PureWhite
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
Average Rated For50,000Hours
LIGHTING SPECIFICATION
Average Rated For35,000Hours
CW=75WW=75
COLOR LUMENSDay Light 200
Warm White 240
LIGHTING SPECIFICATIONSLUMINESCENCE
COLORRENDERINGINDEX
Average Rated For30,000Hours
CW=75WW=75
6000K3000K
CoolWhite
WarmWhite
PureWhite
COLOR LUMENSDay Light 200
Warm White 240
LIGHTING SPECIFICATIONSCOLOR TEMPERATURE
LUMINESCENCE
COLORRENDERINGINDEX
PART # COLOR BASE WATTS VOLTLED-FEST-12V-WW Warm
White Festoon 0.8W 12VLED-FEST-24V-WW 24V
PART # COLOR BASE WATTS VOLTLED-WEDGE24 Warm White Wedge 0.7W 24V
PART # COLOR BASE WATTS VOLTLED-MR16-MULTI Warm White GU5.3 2W 120V
PART # COLOR BASE WATTS VOLTLED-JC-12CW Cool White G4 0.6W 12VLED-JC-12WW Warm White
PART # COLOR BASE VOLTLED-G16-CW Cool White E26 120V
PART # COLOR BASE VOLTLED-G19-RGB RGB E26 120V
LED BULBS12 V / 24 V / 120 V
BulbsSPECIALTY TYPE NEW!
I-496
Upgrade existing cans with an energy efficient LED option!
Fits Existing6” Can
LED-REPL-6
Dimmable!
LED-REPL-4
Fits Existing4” Can
It is recommended that all electrical products be installed by a licensed electrician.
PRODUCT FEATURES:• Eliminatefrequentlampreplacement,byupgradingexisting4” and6”canswiththisenergyefficientLEDreplacementmodule• Easytoinstall!Simplyremovethelamp&trim,thenscrewthe adaptorfromtheLEDmoduleintotheexistinghousing&secure withthebuiltinclips• Dimmablewithmoststandardincandescentdimmers•,suitablefordamplocationsC
lassified
LIGHTING SPECIFICATIONS COLOR TEMPERATURE BEAM SPREAD LUMINESCENCE COLOR
RENDERINGINDEX Average
Rated For35,000Hours
4” = 786” = 83
3000K
CoolWhite
WarmWhite
PureWhite
COLOR LUMENSWarm White (LED-REPL-4) 411
Warm White (LED-REPL-6) 56785˚
PART # DESCRIPTIONLED-REPL-4 4”ReplacementModule10WLED-REPL-6 6”LEDReplacementModule12.9W
RECESSED DOWNLIGHT MODULE
LED LIGHTING120 VRecessed
Suitable ForDamp Locations
C
lassified
NEW!
I-497
** AverAge rAted bulb lIfe vAlues Are bAsed on A lArge number of representAtIve lAmps under controlled lAborAtory condItIons. IndIvIduAl lAmps or group of lAmps mAy vAry from the nomInAl lIfe.
* note: OPI or OPI ecOnOmy Is not A brAnd nAme.
Replace any matching halogen bulb with our new xenon bulb. It will burn cooler, longer, and produce a whiter light than halogen. This xenon bulb does not require special handling or additional glass coverings like halogen bulbs do.
use WIth the folloWIng product groups or pArt#s: Tech Lighting Pendant/Fixtures For Monorail, Freejack & Wall Collection, OPI Series Low Voltage Track, Hera Low Voltage Under Cabinet Lighting, UCL* Economy Undercabinet Lighting, Maxilight, CHU* Connectable Undercabinet Lighting, WAC Light Bars, Ecostrip.
USe WITH THe FOLLOWInG PRODUcT GROUPS OR PART#S: WAC Low Voltage Track Heads & Exhibit Lights, CLS* Cable Light Systems, Ambiance LX & Ambiance MX, Flex Line Kits, Inteltrax, DWL* Downlights, Recessed Lighting, Truss Track System, Hera Undercabinet Lighting, Graphics Projection Light, Galaxy Fiber Optic Systems.
mr11/mr16 hAlogenseries 3:
Xenon bI-pInseries 2:
hAlogen bI-pIns
use WIth the folloWIng product groups or pArt#s: Recessed Lighting, WAC Exhibit Lights, SL* Exhibit Lights.
FROSTeD PARs AVAILABLe, PLeASe InQUIRe
Eliminate glare, and produce a smooth, even pattern of light.pAr hAlogen lAmpsseries 4:
electronIc trAnsformers/hArdWIre - 12v/24v PRODUcT FeATUReS:
• UL&C-ULrecognized.•Aluminumcasing.•Waterproofpotting.•6”leadwire.•60-wattmodelis“CLASS2”.•60,75&150-wattmodelsarecompatiblew/bothincandescent&electronicdimmers.• 300-wattmodelsarecompatiblewithelectronicdimmersonly.
2.12”
1.32”
.80”
electronIc trAnsformers/hArdWIre WIth cAse - 12v/24v PRODUcT FeATUReS:
• UL&C-ULlisted.•Aluminumcasing,waterproofpotting&6”leadwire.•Steeloutercaseactsasawiringcompartmentw/kock-outsforconduitorBXarmoredcable.•150-wattmodelis1.5”squarex6.5”longandiscompatiblew/bothincandescent&electronicdimmers.
electronIc trAnsformer/plug In - 12v - 60WPRODUcT FeATUReS:
• UL&C-ULlisted.•Class2.• Blackplasticcasing&wire.• 108”SPT-2leadwire.• Compatiblewithelectronic&incandescentdimmers.
series 1:
pArt # bAse WAtts voltsAverAge rAted
bulb lIfe ** lumensX-20W-lo-4 2-PING4 20W 12V 5000hrs. 280
OPI ecOnOmy LAmPSpArt # bAse WAtts volts
AverAge rAted bulb lIfe ** lumens
he-10W 2-PING4 10W 12V 2000hrs. 120he-20W 2-PING4 20W 12V 2000hrs. 320
*
mR16pArt # bAse WAtts volts
AverAge rAted bulb lIfe **
mAnufActurerdescrIptIon
mre-16 Gx5.3 50W 12V 2000hrs. OPI36°NarrowFloodlight
LenSeD mR16pArt # bAse WAtts volts
AverAge rAted bulb lIfe **
mAnufActurerdescrIptIon
mre16-cl Gx5.3 50W 12V 2000hrs. OPI36°FloodlightEXN/Cmre16-cl-20 Gx5.3 20W 12V 2000hrs. OPI36°FloodlightBAB/C
mR11pArt # bAse WAtts volts
AverAge rAted bulb lIfe **
mAnufActurerdescrIptIon
mre-11 2-PING4 20W 12V 2000hrs. OPIEconomyNarrowFlood24°FTD
pArt # bAse WAtts voltsAverAge rAted
bulb lIfe **mAnufActurer
descrIptIonpAr-20 MEDNP 50W 120V 2500hrs. OPI economypAr-30 MEDNP 75W 120V 2500hrs. OPI economypAr-38 MED SKIRT 90W 120V 2500hrs. OPI economy
pArt #mAXImum
loAdmInImum loAd
WIthout dImmermInImum loAdWIth dImmer Input
output AtmAXImum loAd
Input currentAt mAXImum loAd
output current At mAXImum loAd
lt-60h(12volt) 60W 20W 20W 120V,60Hz 11.75V,40KHz 0.5A 5A
pArt #mAXImum
loAdmInImum loAd
WIthout dImmermInImum loAdWIth dImmer Input
output AtmAXImum loAd
Input current At
mAXImum loAd
output current At
mAXImum loAdlt-150h/c 150W 50W 50W 120V60Hz 11.8V30KHz 2.5A 12.56A
pArt #mAXImum
loAd
mInImum loAd
WIthoutdImmer
mInImum loAdWIth
dImmer Input
output At
mAXImum loAd
Inputcurrent
At mAXImum loAd
output current
At mAXImum loAd
lt-60p(12volt) 60W 20W 20W 120V
60Hz11.5V40KHz 0.5A 5A
HALOGEN / XENON BULBSBI-PIN, MRE16, PAR TYPE12 V / 120 V
bulbs
TRANSFORMERS
I-498
PRODUCT FEATURES:•60,000hourLEDlife.•ULListedandlabeledforwet,IC,ceilingandoutdoorburialapplications.•Lowenergyconsumption,.54Wattperfixture.•Upto100fixturesperpowersupply.•Availablein4finishes:Aluminum,Bronze,BlackandWhite.•AvailableinCoolWhite7000K+/-200KandWarmWhite3300K+/-200K.•Green,Blue,RedandAmberLEDbulbsavailable,pleaseInquire.•Fixtureisdiecastaluminumprovidingcorrosionprotection,strength,weightandconsistencyoffinish.•Lensisfrostedtemperedglass.•Fitsinany1”diameterhole,3-1/2”long.
APPLICATIONS:H STEPSH AISLESH PATHSH DIRECTION LIGHTINGH DECORATIVE LIGHTINGH MERCHANDISINGH LANDSCAPE ACCENTSH INFORMATION LIGHTINGH DRIVEWAYS (not for Scoop Light)
It is recommended that all electrical products be installed by a licensed electrician.
LED MiniDisc Light™
SHOWN IN COOL WHITE
SHOWN IN WARM WHITE
1”
3-1/4”2”
1”
3-1/4”2”
2” 7/8” 2” 7/8”
LED MiniDisc
Scoop Light™
PART # LIGHT FINISHLEDMD-CW-AL
CoolWhite(7000K)
AluminumLEDMD-CW-BZ BronzeLEDMD-CW-WH WhiteLEDMD-CW-BK BlackLEDMD-WW-AL
WarmWhite(3300K)
AluminumLEDMD-WW-BZ BronzeLEDMD-WW-WH WhiteLEDMD-WW-BK Black
PART # LIGHT FINISHLEDMDS-CW-AL
CoolWhite(7000K)
AluminumLEDMDS-CW-BZ BronzeLEDMDS-CW-WH WhiteLEDMDS-CW-BK BlackLEDMDS-WW-AL
WarmWhite(3300K)
AluminumLEDMDS-WW-BZ BronzeLEDMDS-WW-WH WhiteLEDMDS-WW-BK Black
LED MINIDISC DRIVERFOR USE WITH UP TO 100 FIXTURES OF EITHER STYLE
PART # DESCRIPTION
LEDDR-12-60W 12V,60W,class2LEDDriver**(**ULListedforindoorandoutdooruse)
LED MINIDISC ACCESSORIESPART # DESCRIPTION
LW-18G-CL2SolidCore,18G,“CL2”ListedLowVoltageWire
Use with LED MiniDisc for all In-wall applications, indoor or outdoor.
LW-18G-BURSolidCore,18G,“DirectBurial”Listed
LowVoltageWireUse with LED MiniDisc for all applications
that require wire to be buried.
LEDMD-CF5”Long,PlasticTubewithEndCaps
Use for concrete pour placement of the LED MiniDisc.
MiniDisc &MiniDisc scoop Light ™
LED LIGHTING12 V
Landscape UL LISTED SUITABLE FOR WET LOCATIONS
I-499
• MADE OF STYRENE PLASTIC • AVAILABLE BY SHEET OR CASE • SHEET SIZE: 2' x 4'• DURABLE AND ECONOMICAL • VARIETY OF PATTERNS TO CHOOSE FROM
GENERAL GRADE STYRENE
CRYSTAL CLEAR ACRYLIC PRISMATIC
EGG CRATE LOUVER
UV STABILIZED - THE ULTIMATE LIGHT DIFFUSER!
WILL NOTSAG!
PRISMATICClear or White
CRACKED ICEClear or White
EGG CRATE LOUVERWhite, Black, Brass or Chrome
FLAT MIST WHITE
PART # PATTERN COLORPANEL
THICKNESSSHEETS
PER CASES14-P2CL Prismatic Clear .085 20S14-P2WH Prismatic White .085 20S14-PICL Prismatic Clear .095 20S14-PIWH Prismatic White .095 20S14-CICL Cracked Ice Clear .070 25S14-CIWH Cracked Ice White .070 25S14-FIWH Flat White .055 30
PART # PATTERN COLORPANEL
THICKNESSSHEETS
PER CASES14-A1CL Economy Clear .100 20S14-A3CL Residential Clear .125 20S14-A4CL Commercial Clear .156 20
PART # PATTERN COLORPANEL
THICKNESSSHEETS
PER CASEL2-BK Egg Crate Louver 5/8" x 5/8" x 3/8" Black 3/8" 15*L2-WH Egg Crate Louver 5/8" x 5/8" x 3/8" White 3/8" 15*L2-BR Parabolic Louver 1/2" x 1/2" x 5/16" Brass 7/16" 10**L2-CH Parabolic Louver 1/2" x 1/2" x 5/16" Chrome 7/16" 10**
LUMINOUS CEILING PANELS
See pages 795-796 for additional Luminous Ceiling Tiles