JOB PROCEDURE FOR LIGHT WEIGHT BLOCK WORK

PROJECT:- “GOLDEN PANORAMA” RESIDENSIAL LUXURY APARTMENTS

PROJECT NAME : “GOLDEN PANORAMA” RESIDENTIAL LUXURY APARTMENTS. BANGALORE

CLIENT : GOLDEN GATE PROPERTIES LIMITED. BENGALURU.

CONSULTENT : FBA CONSULTING PMC.

DOCUMENT NO : FBA/GGP/JP/009.

Procedure No: GGPL/***/JP/009

ISSUED FOR APPROVAL&

IMPLEMENTATION

REV 0 DATE DESCRIPTIONPREP.

BYFBA

CHD.BY

FBA

APPROVEDBY

FBAREVIEWED & APPROVED

BY GGPL

Page 3 of 6

PROCEDURE FOR LIGHT WEIGHT BLOCK WORK

JOB PROCEDURE FOR LIGHT WEIGHT BLOCK WORK

PROJECT:- “GOLDEN PANORAMA” RESIDENSIAL LUXURY APARTMENTS

CONTENTS:

1. PURPOSE

2. SCOPE

3. REFERENCES & CONTROLLING SPECIFICATIONS

4. DETAILE ACTION PLAN

FBA GOLDEN GATE

Page 3 of 6

JOB PROCEDURE FOR LIGHT WEIGHT BLOCK WORK

PROJECT:- “GOLDEN PANORAMA” RESIDENSIAL LUXURY APARTMENTS

1. PURPOSE:

THE PURPOSE OF THIS PROCEDURE IS TO. Provide uniform predetermined, well methodology for Execution of

light weight block masonry work. Establish a guide line for record keeping. Minimize the errors. Control of non-conformance.

2. SCOPE:

The scope involved the various activities such as

Checking of the material, laying, joining, Curing related to light weight block work,

This procedure has been established which subject to revision is depending on its requirement.

3. REFERENCE DOCUMENTS Method statement, CPWD specification. IS 6072 AFC Drawings.

4. DETAIL ACTION PLAN:

Prior to start the work strength & density to be checked in MTC given by manufacturer.

Using factory made dry mortar made from combination of cement, gardened sand and chemical additives, like FIXOBLOCK from Ultratech or equivalent as per Engineer-in-charge recommendations.

The standard sizes of the blocks are (600MM X 200MM & 600MM X 200MM), while using the Light weight blocks it has to be soaked in water sufficiently to wet the blocks, proper soaking of blocks shall prevent the suction of chemical additive as per manufacturer specifications and recommendations.

FBA GOLDEN GATE

Page 3 of 6

JOB PROCEDURE FOR LIGHT WEIGHT BLOCK WORK

PROJECT:- “GOLDEN PANORAMA” RESIDENSIAL LUXURY APARTMENTS

Light weight blocks should be placed on chemical additive bed true to its line plumb in ENGLISH/FLEMISH bond. Joint of (20MM) blocks should be staggered and all the joints should be filled with chemical additive properly. Any gap between the finished block work and Offices roof slab/beam shall be suitably scaled with chemical additive.

In case of brick of half brick thickness, walls shall be reinforced with 2 nos. 6MM dia steel bars placed at every third course with chemical additive.

Curing shall be done after 24 Hrs. of completion of days work and shall be done for a period of 7 days. All fixtures, pipes, conduits, Holdfasts of doors and windows etc., required to be built in walls has to be embedded properly.

RECORD & DOCUMENTATION: As per ITP

FBA GOLDEN GATE

Page 3 of 6