light, strong, durable – solutions for efficient …...pg 3 light, strong, durable – solutions...
TRANSCRIPT
Light, Strong, Durable – Solutions for Efficient Composites Fabrication Dow VORAFORCE™ Composite Systems
Composite SystemsProduct Catalog
DurableScience
pg 3
Light, Strong, Durable – Solutions for Efficient Composites Fabrication
Made to Perform Dow VORAFORCE™ polyurethane composite systems are the result of innovative research and development built on more than 100 years of experience. They are tailored to offer fast curing, exceptional thermo-mechanical properties and excellent compatibility with fiber reinforcements to help master complex challenges in multiple industries.
The VORAFORCE™ AdvantageAdvanced composite solutions from Dow offer significant performance, efficient processing and cost advantages for the fabrication of strong, lightweight and durable composites as used in energy, construction, infrastructure and transportation industries.
VORAFORCE™ composite systems from Dow enable:• Toughness and durability• High-temperature resistance• Efficient processing• Good corrosion and chemical
resistance• Quality consistency• Tailorability to customer needs
LIGHT STRONGUp to 4 times lighter than steel Tough, robust, high temperature
and high pressure resistance
DURABLEGood corrosion resistance, weather-
ability and electrical properties
The Dow AdvantageVORAFORCE™ systems demonstrate the knowledge, experience and technology innovation Dow offers its composites customers. With offices and development centers located around the world, Dow can ensure regional technical and commercial support wherever you are, whenever you need it.
Solutions for Efficient Composites FabricationDow VORAFORCE™ polyurethane composite systems represent one of the most robust portfolios in the industry, with formulated solutions for filament winding, pultrusion, structural and long fiber injection applications.
The entire VORAFORCE™ range is characterized by low volatile organic compound (VOC) emissions during production.
Dow’s Specialized VORAFORCE™ Composite Systems Portfolio Is Tailored to Customer Fabrication Needs:
Fabrication Process Polyurethane Systems
Filament Winding
Pultrusion
Long Fiber Injection
RTM, SRIM
Spray Preg, Composite Spray
Reinforced RIM
pg 4
Light, Strong, Durable – Solutions for Efficient Composites Fabrication
Marine: SeawallsFabrication process: PultrusionReinforcement: Glass and carbon fibersDow system: VORAFORCE™ TP 1200 series
Infrastructure
ConstructionShaped Building Profiles: I-, O-, U-, Z-ShapedFabrication process: PultrusionReinforcement: Glass and carbon fibersDow system: VORAFORCE™ TP 200/1200 series
Benefits• Corrosion resistance• Enhanced polyurethane systems• Lightweighting• Excellent processing properties
Dow VORAFORCE™ TP Resin Technology for PultrusionThe VORAFORCE™ TP series consists of formulated systems for pultrusion applications. The VORAFORCE™ TP series of solutions exhibit superior mechanical and thermal properties for a wide range of applications. These systems exhibit low viscosities for efficient fiber wet-out and excellent handling characteristics.
Typical Properties of VORAFORCE™ TP Formulated Systems1
System Glass Transition Temp (°C) Mix Ratio (phr) Pot Life (min) Mixed Viscosity
@ 25°C (cPs)Suggested Die Temp (°C)
VORAFORCE™ TP 1260/TP 1200/TM 3500 130-140 110 25-35 1200-1400 180-220
1Data per tests conducted by Dow. Test protocols and additional information available upon request. Properties shown are typical and not to be construed as specifications.
Typical Properties of VORAFORCE™ TL Formulated Systems1
System HP Cream Time (s)
HP Machine Gel Time(s)
Comp. Viscosity @ 25°C (cP)
Glass Fiber Content in Polymer
Impact Charpy @ 25°C (kJ/m2)
Tensile Strength (MPa)
Flexural Strength (MPa)
VORAFORCE™ TL 1651/TL 1600 35-40 70-75 360/210 20 >40 >70 >80
VORAFORCE™ TL 1652/TL 1600 40-45 60-65 2100/210 35 >53 >140 >200
VORAFORCE™ TL 1653/TL 1601 55-60 65-70 2800/600 34 >60 >150 >200
VORAFORCE™ TL 1654/TL 1600 40-50 70-80 17000/200 35 >80 >130 >200
VORAFORCE™ TL 1655/TL 1600 45-50 55-60 2500/210 32 >35 >130 >120
VORAFORCE™ TL 1658/TL 1602 90-100 160-170 2100/130 35 >65 >140 >230
VORAFORCE™ TL 1659/TL 1602 90-100 160-170 2100/130 35 >65 >140 >230
VORAFORCE™ TL 1660/TL 1600 35-40 65-70 1100/210 25 >60 >65 >95
1Data per tests conducted by Dow. Test protocols and additional information available upon request. Properties shown are typical and not to be construed as specifications.
Dow VORAFORCE™ TL Resin Technology for Long Fiber InjectionThe VORAFORCE™ TL series consists of formulated systems for long fiber injection applications. The properties of the VORAFORCE™ TL series systems exhibit a range of desirable characteristics depending on the end application.
pg 5
Light, Strong, Durable – Solutions for Efficient Composites Fabrication
Manhole CoversFabrication process: Long fiber injectionReinforcement: Chopped glass fiberDow system: VORAFORCE™ TL 1600 series
Urban infrastructure applications include composites bridges.
Infrastructure
Construction
Transportation
Building Parts and PanelsFabrication process: Long fiber injectionReinforcement: Chopped glass fibersDow system: VORAFORCE™ TL 1600 series
Applications:• Cladding and roof panels• Windows and doors• Decking solutions
Vehicle PartsFabrication process: Long fiber injectionReinforcement: Chopped glass fibersDow system: VORAFORCE™ TL 1600 series
Applications:• Vehicle body panels• Dashboard reinforcements• Fenders
Benefits• Excellent processing properties• Excellent load-bearing properties• Short cycle times due to very
fast cure• Good surface quality• Good chemical resistance
Benefits• High strength and toughness• Good durability and weatherability• Very fast cure for short cycle
Benefits• Excellent mechanical properties• Very fast cure for short cycle times• High structural strength
composite parts
pg 6
Light, Strong, Durable – Solutions for Efficient Composites Fabrication
Dow VORAFORCE™ TW Resin Technology for Filament WindingThe VORAFORCE™ TW series consists of formulated systems for filament winding applications. They exhibit excellent flow properties and fiber wetting due to low viscosities and long working times. This system combines good mechanical and electrical properties, as well as high temperature resistance and low moisture take-up.
Typical Properties of VORAFORCE™ TW Formulated Systems1
SystemGlass Transition Temp (°C)
Mix Ratio (phr) Pot Life (min)
Mixed Viscosity @ 25°C (cPs)
Suggested Cure Schedule
Tensile Strength (MPa)
Flexural Strength (MPa)
K1C Fracture Toughness (MPa – m0.5)
VORAFORCE™ TW 1150/TW 1100 85-95 105 25-30 100-300 2 hrs @ 100°C 65-75 90-100 1.6-1.8
1Data per tests conducted by Dow. Test protocols and additional information available upon request. Properties shown are typical and not to be construed as specifications.
Dow VORAFORCE™ TJ Resin Technology for Structural ApplicationsThe VORAFORCE™ TJ series consists of formulated systems for structural composite applications. These systems exhibit good mechanical properties for a wide range of applications.
Typical Properties of VORAFORCE™ TJ Formulated Systems1
System HP Machine Cream Time (s)
HP Machine Gel Time (s)
Comp. Viscosity @ 25°C (cPs)
Hardness (Shore D)
Impact Charpy @ 25°C (kJ/m2)
Flexural Strength (MPa)
VORAFORCE™ TJ 1852/ TJ 1802/TM 3502 3-4 8-10 1250/250 75-80 30-35 85-90
1Data per tests conducted by Dow. Test protocols and additional information available upon request. Properties shown are typical and not to be construed as specifications.
InfrastructureElectrical: Power and Transmission PolesFabrication process: Filament windingReinforcement: Continuous glass fibersDow system: VORAFORCE™ TW 1100 series
Benefits• Continuous reinforcement
and manufacture of cylindrical structures
• Enhanced elongation, toughness and crack resistance
• Solutions available for critical humidity manufacturing conditions (up to 60% relative humidity)
pg 7
Light, Strong, Durable – Solutions for Efficient Composites Fabrication
Transportation
Technical and Design Parts
Vehicle PartsFabrication process: Reinforced reaction injection molding (RRIM)Reinforcement: Short mineral fibersDow system: VORAFORCE™ TJ 1800 series
Applications:• Aesthetic interior parts• Bumpers• Mud guards
Chair ShellsFabrication process: Reinforced reaction injection molding (RRIM)Reinforcement: Short glass fibers or fillersDow system: VORAFORCE™ TJ 1800 series
Benefits• Enhance performance through
toughened technology• Low temperature impact
resistance• Superior surface quality• Fast cure• Excellent paintability
Benefits• High surface quality• Short cycle times
Product StewardshipWhen considering the use of any Dow products in a particular application, you should review the latest Material Safety Data Sheets from Dow and ensure that they are intended for safe use. For Material Safety Data Sheets and other product safety information, contact Dow. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.
No chemical should be used as or in a food, drug, medical device or cosmetic, or in a product or process in which it may contact a food, drug, medical device or cosmetic until the user has determined the suitability and legality of the use. Since government regulations and use conditions are subject to change, it is the user’s responsibility to determine that this information is appropriate and suitable under current, applicable laws and regulations.
Dow requests that the customer read, understand, and comply with the information contained in this publication and the current Material Safety Data Sheet(s). The customer should furnish the information in this publication to its employees, contractors and customers, or any other users of the product(s), and request that they do the same.
®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow
Notice: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, theCustomer is responsible for determining whether products and the information in this document are appropriate for the Customer’s use and for ensuring that the Customer’s workplace and disposal practices arein compliance with applicable laws and other governmental enactments. The technology represented in this document may not yet be registered, and related products may not yet be available in all geographieswhere Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALLIMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Notice: Any photographs of end-use applications in this document represent potential end-use applications but do not necessarily represent current commercial applications, nor do they represent anendorsement by Dow of the actual products. Further, these photographs are for illustration purposes only and do not reflect either an endorsement or sponsorship of any other manufacturer for a specificpotential end-use product or application, or for Dow, or for specific products manufactured by Dow. References to “Dow” or the “Company” mean The Dow Chemical Company and its consolidated subsidiaries unless otherwise expressly noted.
Form No. 880-07301-0816
dowpolyurethanes.com Dow CIG North AmericaToll Free +800-441-4369Toll 1-989-832-1426
The Dow Chemical Company2030 Dow CenterMidland, MI 48674
Innovating For YouFor more information and product samples, contact us at your convenience: