light is fl exible wireless light control with lightify™ pro · the compact recessed led louvre...
TRANSCRIPT
Light is fl exible
Wireless light control
with LIGHTIFY™ ProIntelligent lighting solutions for offi ces and public buildings
Light is OSRAM
www.osram.com | www.siteco.com
Your benefi ts
— Practical individual control via mobile
devices in almost all IT networks
— LIGHTIFY™ Pro app: intuitive operating
interface for the commissioning and
confi guration of all luminaire functions
— Can be combined with LIGHTIFY™ Pro
push-button coupler for up to 4 push-
buttons and sensors
— Simple commissioning and reduced
installation costs because of no bus lines
— Especially suitable for modernization
projects and diffi cult-to-access areas
LIGHTIFY™ Pro | Introduction
2
The innovative, wireless LIGHTIFY™ Pro system from
OSRAM allows you to control essential functions of your
lighting system with a mobile device.
The system is based on the ZigBee Light Link standard.
Thanks to ZigBee, luminaires equipped with LIGHTIFY™
Pro are able to communicate directly with special wireless
push-button couplers and sensors. The connection with
mobile devices is established via a special gateway that
converts WLAN signals to ZigBee signals. LIGHTIFY™
Pro can therefore be used in almost all IT networks.
In addition to the increased operating comfort, the
LIGHTIFY™ Pro wireless system provides other important
benefi ts. Because no bus lines are needed, installation
costs are reduced and diffi cult-to-access areas can be
controlled without complex cabling. Upgrade your system
now with LIGHTIFY™ Pro!
LIGHTIFY™ Pro – this is how practical
your smartphone can be
More convenient light control by integration of mobile devices as well as cost savings
thanks to wireless installation
No need to do without familiar features — Push-button coupler for standard interface programs
of all manufacturers
— Up to 4 push-buttons per push-button coupler can
be programmed via the LIGHTIFY™ Pro app
— No need to change room control habits
LIGHTIFY™ Pro | Introduction
3
Wireless is the key – communication in the LIGHTIFY™ Pro system
Router
WLAN
ZigBee
Gateway*
LAN
Optional
Internet access
Tablet PC
Smartphone
* For commissioning, a hotspot mode in the gateway can be activated to provide
WLAN access for smart devices without an IT building infrastructure.
Integrated solutions and components
for upgrades
LIGHTIFY™ Pro in the OSRAM and Siteco portfolio
Lunis 2® DownlightAvailable with different lamp technologies (LED and conventional) and two construction
sizes, the Lunis 2® Downlight represents a fl exible lighting kit for maximum aesthetic
appeal and functionality. Thanks to its intelligent mounting method (innovative rapid catch
system) and suitable accessories, the downlight can be fl exibly modifi ed either with or
without cover ring or installed completely fl ush to the ceiling. An optimally matched highly
specular refl ector ensures highly precise light distribution with various beam characteristics.
Compact Recessed LEDThe Compact Recessed LED louvre luminaire is the ideal replacement for T5 and T8
luminaires (4 x 18 W) with standard module dimensions. With a microprismatic cover,
the luminaire achieves the required glare reduction factor for use in offi ces. In addition,
its LED module already complies with the Zhaga standard, meaning that it can be simply
replaced with another Zhaga module at a later date. Compact Recessed LED is laid into
ceilings without the use of tools. The electrical connection is established as usual or by
using a standardized Linect® system.
LIGHTIFY™ Pro | Portfolio
4
Currently, six luminaire models (see below and right) with integrated LIGHTIFY™ Pro functionality are available for applica-
tions in offi ces and public buildings. In addition, standard components for upgrades are available, which can be connected
to existing luminaires. In this way, the complete OSRAM and Siteco luminaire portfolio can be upgraded if a suspended
ceiling exists.
LIGHTIFY™ Pro | Portfolio
5
Mira®
Available with recessed, surface-mounted and suspended versions, the Mira® luminaire is
suitable for almost all regular applications in a building. It unlocks the full potential of state-
of-the-art LED technology: high energy effi ciency, low maintenance and a long lifetime.
Further savings are possible with integrated daylight and motion sensors. The specifi cally
developed microprismatic technology disperses the light of the single LEDs into homo-
geneous light that achieves a harmonious room impression and good contrast conditions.
ARKTIKA-P LEDThe suspended design luminaire ARKTIKA-P LED with its purist, slender construction is a
real eye-catcher. But it is not only the design that makes an impression: ARKTIKA-P LED
is suitable for VDU workstations and features all relevant characteristics for ideal offi ce
lighting. Each single LED is surrounded by a refl ector hexagon that achieves the effect of
a darklight refl ector. In this way, the light of the LEDs is guided downwards almost without
loss, glare is reduced and visual comfort increased.
VEGAWhether suspended, surface-mounted or installed to a system rail, the VEGA design
luminaire is ideal for all mounting situations, offering very high quality of light and
effi cient LED technology. Specifi cally developed prismatic structures ensure that offi ce
guidelines are complied with and that suitability for VDU workstations is ensured.
Visually as well, the VEGA sets accents with its transparent and modern design:
when switched off, the light-guiding prismatic plate with a height of only 6 mm is
almost transparent.
Futurel® LEDThe Futurel® LED fl oor-standing luminaire combines timeless design and professional
lighting technology. With double asymmetric light distribution, it ensures the precise
illumination of single workstations and meets the requirements of EN 12464 for room
heights of up to four meters. In addition, it also fulfi lls the criteria for the illumination of
VDU workstations. Futurel® LED is intelligent: with the aid of integrated daylight and
motion sensors, it automatically switches on and off to ensure maximum energy effi ciency.
LIGHTIFY™ Pro | Application
6
LIGHTIFY™ Pro makes it easier for you
Simple commissioning, simple operation and simple modifi cation
LIGHTIFY™ Pro provides new and familiar features at the
same time to achieve a high level of fl exibility and user
friendliness. Users can decide: the lighting is either con-
trolled with a mobile device via the LIGHTIFY™ Pro app
or with a standard light switch. The wireless push-button
coupler for this purpose was specifi cally developed for
the LIGHTIFY™ Pro system. Whether modern and mobile
or familiar and simple: thanks to wireless technology, you
save effort and costs with both control methods.
Your options — Operation with mobile device via LIGHTIFY™ Pro app
— Operation via standard light switch in fl ush-mounted
socket: can be freely combined with all standard switch
programs and switch assignments (on/off, scenes etc.)
and can be modifi ed at any time
— Integration of LIGHTIFY™ Pro light and motion sensors
Find out more about LIGHTIFY™ Pro:
www.osram.com/lightify-pro
LIGHTIFY™ Pro | Application
7
Overview of the LIGHTIFY™ Pro app
Features — Simple, intuitive start-up
— Simple identifi cation and naming of network
devices
— Preset function profi les for single offi ce, group
offi ce, stairway, corridor, meeting room, wash
room as well as swarm function
— Individual modifi cation of function profi les
— Group assignment via drag & drop
— Room-oriented operation, call up of room
control via QR code next to light switch
— Modifi cation (or destruction) of confi guration
not possible
— LIGHTIFY™ Pro gateway required
1 Connect with gateway
and read-in wireless device
3 Set up the scenes – and it’s done!
2 Assign devices to the desired
groups
Energy-saving potential of LIGHTIFY™ Pro and DALI control systems
Obsolete system refurbishment Power per light point Operating time Energy consumption Savings Energy costs
with 40 light points [W] [h/a] [kWh/a] [%] [EUR/a] 1)
Existing installation with conventional luminaires without control
110 3120 13728 0 % 3432
Refurbishment with LED luminaires 75 3120 9360 32 % 2340
without control
Refurbishment with LED luminaires 75 1248 2) 3744 75 % 936
with light and motion sensors
DALI or LIGHTIFY™ Pro
1) Costs per kWh: EUR 0.25
2) Based on empirical values of similar applications
In the given example (refurbishment of a lighting system and concrete ceiling),
the ROI for the wireless LIGHTIFY™ Pro system is 3.7 years.
LIGHTIFY™ Pro | Savings
8
Save energy and installation costs
with LIGHTIFY™ Pro
The benefi ts at a glance
Installing wireless luminaires with DALI functionality provides
maximum fl exibility for the selection of the installation loca-
tions and requires minimum costs due to the lack of addi-
tional cabling. With the use of highly effi cient LED techno-
logy in the LIGHTIFY™ Pro luminaires, you save energy
compared to standard technology and achieve a high cost
advantage in a very short time.
LIGHTIFY™ Pro system luminaires are ideal for new installa-
tions, but existing luminaires can also be simply and intelli-
gently upgraded with the LIGHTIFY™ Pro system.
Installation with minimum effortIf functionalities, such as sensors, integration of fl oor-stand-
ing luminaires into the control technology, convenient oper-
ation with smart devices and higher-level timer functions,
are needed, the additional installation of a bus system for
the complete area cannot be avoided.
In some cases, the refurbishment of the lighting system
with DALI control technology is not economical as it may
require extensive and cost-intensive construction work,
such as chiseling, closing of the wall slots, plastering,
painting as well as an intensive fi nal cleaning. Due to these
measures, rooms can only be used for a limited time or
even not be used during the building period.
With LIGHTIFY™ Pro, the follow-up costs and non-usage
times can be minimized. The moderate costs for control
components and the signifi cantly reduced costs for
subsequent construction work and commissioning result
in considerable cost advantages compared to a DALI
installation.
ENERGY
-75 %
LIGHTIFY™ Pro | Savings
9
2
2
2 2 2
22
22
222
2
2 2 2 2
1 1 1 1 1
1 111
1
1
2 2 2 2
111 1 1 1 1
111
GW
PBCPBC
PBCPBCPBC
PBC
B B B B C C
B
A
B B B C C
D
F F F
D
A
A
G
A
H
A A
E
A
F F F
E E
E E E
G
GG
Lighting system without LIGHTIFY™ Pro Existing lighting system with off-switches next to room
doors and push-button control in the corridor
Lighting system with LIGHTIFY™ ProStandard luminaires have been replaced with LIGHTIFY™ Pro
luminaires. In each case, LIGHTIFY™ Pro luminaires with and
without sensor are used. Only wireless communication.
LIGHTIFY™ Pro luminaire
without sensor
LIGHTIFY™ Pro luminaire
with sensor
A Lunis 2® Downlight
B Compact Recessed LED
C Mira®
D ARKTIKA-P LED
E VEGA
F Futurel® LED
G Lunis Sensor with DSE-PIR
GW Gateway
H Ceiling sensor with battery
PBC Push-button coupler
with standard push-button
1 Room luminaire group 1
2 Room luminaire group 2
1 Off-switch
Room luminaire group 1
2 Off-switch
Room luminaire group 2
Push-button
Energy savings includedWith the use of light and motion sensors, the energy con-
sumption of your lighting system is signifi cantly reduced.
Depending on the specifi c use of the offi ce rooms and the
quantity of daylight entering, up to 75 % of energy costs
can be saved.
www.osram.com | www.siteco.com
OSRAM GmbH
Head office:
Marcel-Breuer-Strasse 6
80807 Munich | Germany
Phone +49 89 6213-0
Fax +49 89 6213-2020
www.osram.com
Siteco Beleuchtungstechnik GmbH
Head office:
Georg-Simon-Ohm-Strasse 50
83301 Traunreut | Germany
Phone +49 8669 33-0
Fax +49 8669 33-397
www.siteco.com
Member of
03
/14
S-G
I M
K E
M S
ub
jec
t to
ch
an
ge w
ith
ou
t n
oti
ce
. E
rro
rs a
nd
om
issio
ns e
xc
ep
ted
.