light and reflection. the difference among waves is the nature of the vibrating source. an...
TRANSCRIPT
Chapter 13Light and Reflection
13.1 LIGHT
The difference among waves is the nature of the vibrating source.
An electromagnetic wave is the coupled vibration of electric and magnetic fields free of matter.
An electromagnetic wave is produced by a vibrating (moving) electric field or magnetic field.
All electromagnetic waves travel at the same speed.
Electromagnetic Radiation
• Speed of light (c): 2.997 924 58 x 108 m/s in a vacuum186000 mi/s2.997 09 x 108 m/s in air
c = fl
• Dual Nature of Light• Light waves• Light particles = photons
• h = 6.626 x 10-34 J.s
E = hf
The Electromagnetic Spectrum
• Electromagnetic waves are oscillating electric and magnetic fields.
Visible Light
Visible light is electromagnetic radiation with a frequency range of 4.3 x 1014 to 7 x 1014 Hz.
Radio Waves
The study and description of light in terms of straight line propagation is called optics . In optics, lines, called rays, are drawn perpendicular to the wave front.
Ray optics are used to analyze reflection and refraction of light .
Ray optics do not account for the wave properties of diffraction and interference.
13.0 Introduction - OpticsOptics: the study of the behavior and properties of light
13.2 Reflections - Flat Mirrors
When light waves encounter a barrier (change media) they are absorbed, transmitted, or reflected.
The texture of the reflecting surface affects how it reflects light. Diffuse reflection is reflection from a
rough, texture surface such as paper or unpolished wood.
Specular reflection is reflection from a smooth, shiny surface such as a mirror or a water surface.
A good mirror can reflect 90% of the incident light.
13.2 Reflections - Flat Mirrors
When light is reflected it obeys the Law of Reflection
The angle of incidence and the angle of reflection are always
equal. The angle of incidence is the angle between a
ray that strikes a surface and the line perpendicular (the normal) to that surface at the point of contact.
The angle of reflection is the angle formed by the normal and the direction in which a reflected ray moves.
The normal is an imaginary line drawn perpendicular to the reflecting surface used to measure the incident and reflected angles.
The Law of Reflection
13.2 Reflections - Flat Mirrors
Mirror and Lens Terminology Object distance is p. Image distance is q. Object height is h. Image height is h’. Angle of incidence is q. Angle of reflection is q’.
13.2 Reflections - Flat Mirrors
Mirror and Lens Terminology Virtual Image: The image
formed by rays that appear to come from the image point behind the mirror—but never really do .
A virtual image is not real. A virtual image can never
be displayed on a physical surface.
A dental mirror
13.2 Reflections - Flat MirrorsMirror and Lens Terminology
A dental mirror
Real Image: The image formed by rays of light that actually pass through a point on the image.
A real image can be displayed on a physical surface (a screen).
13.2 Reflections - Flat MirrorsFlat Mirrors
A dental mirror
Flat mirrors form virtual images that are the same distance from the mirror’s surface as the object is.
13.3 Reflections - Curved Mirrors
13.3 Reflections - Curved Mirrors
The Law of Reflection The angle of incidence and the angle of
reflection are always equal. qi = qr
qi
Q’i
Q’r
qr
13.3 Reflections - Curved MirrorsCurved Mirror and Lens Terminology
R is the radius of curvature, which is the same as the radius of the spherical shell of which the mirror is a small part.
C is the center of curvature.
The principal axis (optic axis) is the line that extends infinitely from the center of the mirror’s surface through the center of curvature.
13.3 Reflections - Curved MirrorsCurved Mirror and Lens Terminology
The focal point is the location at which a mirror or a lens focuses rays parallel to the principal axis or from which such rays appear to diverge.
f is the focal length
f = 1/2R.
13.3 Reflections - Curved MirrorsThe Mirror Equation
Image location can be predicted by using the mirror equation.
1
p
1
q
1
f
1
object distance
1
image distance
1
focal length
13.3 Reflections - Curved MirrorsThe Mirror Equation
Signs and Meanings + p: object is in front of mirror+ q: image is real and in front of mirror- q: image is virtual and is located behind
mirror+ R and +f: concave mirror+h and +h’: object and image are above the
principal axis –h’: image is inverted and below the principal
axis
1
p
1
q
1
f
1
object distance
1
image distance
1
focal length
13.3 Reflections - Curved MirrorsThe Equation for Magnification
'–
image height image distancemagnification = –
object height object distance
h qM
h p
What does this mean in words?
Signs and Meanings +M: upright and virtual image -M: inverted and real image
13.3 Reflections - Curved Mirrors
Ray Diagrams are drawings that use simple geometry to locate an image formed by a mirror or lens. The image will be located at the place where the rays intersect. Only two rays are necessary to locate the image on a ray diagram, but it's useful to add the third as a check. 1. Sketch the object and mirror and relative distance between them.2. Draw rays
1. The parallel ray is drawn from the tip of the object parallel to the principal axis. It then reflects off the mirror and either passes through the focal point, or can be extended back to pass through the focal point.
2. The second ray (the chief ray) is drawn from the tip of the object to the mirror through the center of curvature. This ray will hit the mirror at a 90° angle, reflecting back the way it came through the center. The chief and parallel rays meet at the tip of the image.
3. The third ray, the focal ray, is a mirror image of the parallel ray. The focal ray is drawn from the tip of the object through (or towards) the focal point, reflecting off the mirror parallel to the principal axis. All three rays should meet at the same point.
13.3 Reflections - Curved Mirrors
Ray Diagrams
13.3 Reflections - Curved Mirrors
Concave Mirror Image If the object is outside the focal length, a
concave mirror will form a real, inverted, and diminished (smaller) image.
o = p
i = q
positive
in front of the mirror.
13.3 Reflections - Curved Mirrors
Concave Mirror Image If an object is placed inside the focal length
of a concave mirror, and enlarged virtual and erect image will be formed behind the mirror.
o = p
i = q
positive
in front of the mirror.
1. A 1.50 m tall child is in a mirror gallery at the amusement park. She is standing in front of a concave mirror with a radius of 4.00 m. She starts walking toward the mirror from a distance of 9.00 m, and she stops every meter to observe her image. a. Find the focal point of this mirror and label it F.b. Mark the child’s locations 9.00 m, 5.00 m, and 1.00 m in front of the mirror, and label them A, B, C.c. Sketch ray diagrams to locate the image formed when the child is at A. Measure the distance from the image to the mirror and record it below.Distance of A’s image =d. Repeat question c for the object at positions B and C. Distance of B’s image =Distance of C’s image =2. Calculate the image location for the object at A, B, and C in item 1, usingthe mirror equation. Compare your results with your diagrams.Distance of A’s image =Distance of B’s image =Distance of C’s image =
1. A 1.50 m tall child is in a mirror gallery at the amusement park. She is standing in front of a concave mirror with a radius of 4.00 m. She starts walking toward the mirror from a distance of 9.00 m, and she stops every meter to observe her image. a. Find the focal point of this mirror and label it F.b. Mark the child’s locations 9.00 m, 5.00 m, and 1.00 m in front of the mirror, and label them A, B, C.
F CA B
1. A 1.50 m tall child is in a mirror gallery at the amusement park. She is standing in front of a concave mirror with a radius of 4.00 m. She starts walking toward the mirror from a distance of 9.00 m, and she stops every meter to observe her image. c. Sketch ray diagrams to locate the image formed when the child is at A.Measure the distance from the image to the mirror and record it below.Distance of A’s image = 2.5 m
FA
Ray 1
Ray 2
Ray 3
1. c. Sketch ray diagrams to locate the image formed.d. Repeat question c for the object at positions B (5.0 0 m) .Distance of B’s image = 3.3 m
FB
Ray 1
Ray 2
Ray 3
1. c. Sketch ray diagrams to locate the image formed.d. Repeat question c for the object at positions C (1.0 0 m) .Distance of C’s image = -1.8 m
F C
Ray 1
Ray 2 Ray
3
o i
2. Calculate the image location for the object at A (9.00 m), B (5.00 m), and C (1.00 m) in item 1, using the mirror equation. Compare your results with your diagrams.Distance of A’s image = 2.57 m
1/f = 1/p + 1/q
f = focal point, p = object’s distance to mirror, q = image’s distance to mirrorf = 2.00 m , p = 9.00 m, q = ?
1/f – 1/p = 1/q
1/q = 1/f – 1/p
1/q = 1/2.00 m – 1/9.00 m
1/q = 0.500 m-1 – 0.111 m-1
1/q = 0.389 m-1
q = 1/0.389 m = 2.57 m
2. Calculate the image location for the object at A (9.00 m), B (5.00 m), and C (1.00 m) in item 1, using the mirror equation. Compare your results with your diagrams.Distance of B’s image = 3.33 m
1/f = 1/p + 1/q
f = focal point, p = object’s distance to mirror, q = image’s distance to mirrorf = 2.00 m , p = 5.00 m, q = ?
1/f – 1/p = 1/q
1/q = 1/f – 1/p
1/q = 1/2.00 m – 1/5.00 m
1/q = 0.500 m-1 – 0.200 m-1
1/q = 0.300 m-1
q = 1/0.300 m = 3.33 m
2. Calculate the image location for the object at A (9.00 m), B (5.00 m), and C (1.00 m) in item 1, using the mirror equation. Compare your results with your diagrams.Distance of C’s image = -2.00 m
1/f = 1/p + 1/q
f = focal point, p = object’s distance to mirror, q = image’s distance to mirrorf = 2.00 m , p = 1.00 m, q = ?
1/f – 1/p = 1/q
1/q = 1/f – 1/p
1/q = 1/2.00 m – 1/1.00 m
1/q = 0.500 m-1 – 1.00 m-1
1/q = - 0.500 m-1
q = - 1/0.500 m = - 2.00 m
13.3 Reflections - Curved Mirrors A convex spherical mirror is a
mirror whose reflecting surface is the outward-curved segment of a sphere.
Diverging mirror
Light rays diverge upon reflection from a convex mirror, forming a virtual image that is always smaller than the object.
Image: virtual, upright, diminished
(-) f, (-) q, (+) p, (+)M < 1
13.3 Reflections - Curved MirrorsConvex or Diverging Mirrors
A convex mirror forms a virtual image.
A convex mirror forms a virtual image.
13.3 Reflections - Curved MirrorsThe Mirror Equation
Signs and Meanings for Convex Mirrors+ p: object is in front of mirror - q: image is virtual and is located behind
mirror- R and -f: convex mirror+h and +h’: object and image are above
the principal axis–h’: image is inverted or below the
principal axis
1
p
1
q
1
f
1
object distance
1
image distance
1
focal length
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem
Convex Mirrors
An upright pencil is placed in front of a convex spherical mirror with a focal length of 8.00 cm. An erect image 2.50 cm tall is formed 4.44 cm behind the mirror. Find the position of the object, the magnification of the image, and the height of the pencil.
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem, continued
Convex Mirrors
Given:
Because the mirror is convex, the focal length is negative. The image is behind the mirror, so q is also negative.
f = –8.00 cm q = –4.44 cm h’ = 2.50 cm
Unknown:
p = ? h = ?
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem, continued
Convex Mirrors
Diagram:
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem, continued
Convex Mirrors
2. Plan
Choose an equation or situation: Use the mirror equation and the magnification formula.
1 1 1
– and – 'p
h hp f q q
1 1 1 '
and –h q
Mp q f h p
Rearrange the equation to isolate the unknown:
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem, continued
Convex Mirrors
3. Calculate
Substitute the values into the equation and solve:
1 1 1–
–8.00 cm –4.44 cm
1 –0.125 –0.225 0.100–
cm cm cm
10.0 cm
p
p
p
Copyright © by Holt, Rinehart and Winston. All rights reserved.
ResourcesChapter menu
Section 3 Curved MirrorsChapter 13
Sample Problem, continued
Convex Mirrors3. Calculate, continued
Substitute the values for p and q to find the magnifi-cation of the image.
10.0 cm– ' – (2.50 cm)
–4.44 cm
5.63 cm
ph h
q
h
Substitute the values for p, q, and h’ to find the height of the object.
–4.44 cm
– – 0.44410.0 cm
qM M
p
13.3 Reflections - Curved Mirrors
Spherical Aberration and Parabolic Mirrors The blurring of an image that occurs when light from the
margin of a mirror or lens with a spherical surface comes to a shorter focus than light from the central portion.
13.4 Color and Polarization
Color
13.4 Color and Polarization
Color The retina is lined with a
variety of light sensing cells known as rods and cones. The rods on the retina are sensitive to the intensity of light, but cannot distinguish wavelengths (colors). Three types of cone cells in the eye allow humans to see in color.
Light of different wavelengths stimulate a combination of cone cells so that a wide range of colors can be perceived.
cyclohexane.tumblr.com
13.4 Color and Polarization
Color The color of an object depends on which wavelengths of
light shine on the object and which wavelengths are reflected.
RedOrangeYellowGreenCyanBlueviolet
White
Red
Green
Blue
Primary Additive Colors of light produce white light
when added.
13.4 Color and Polarization
Color R + G Y G + B C B + R M
• Additive primary colors produce white light when combined.
• R + G + B W
• Light of different colors can be produced by adding light consisting of the primary additive colors (red, green, and blue).
• Adding different colors of light is used in color television, color computer monitors, and on-stage theater lighting.
• Complementary colors are two colors that add together to produce white light. Two primary colors combine to produce the complement of the third primary color.
C + R W Cyan is the complementary of red.
Y + B W Yellow is the complementary of blue.
M + G W Magenta is the complementary of green.
13.4 Color and Polarization
Color
Filters are transparent materials which selectively absorb (or block) one or more primary colors of light and allow the remaining colors of light to pass through (or be transmitted). The color of the filter describes which color of light is transmitted by the filter.
Opaque objects contain pigments that selectively absorb light and reflect whatever light colors are not absorbed. The color of pigments describes which color(s) of light are reflected.
The color of an object is the color of light the object reflects.
13.4 Color and Polarization
Color A pure pigment absorbs a single
frequency of light. ▪ Yellow absorbs blue. ▪ Magenta absorbs green.▪ Cyan absorbs red.
Three primary colors of paint (primary pigments): yellow, cyan, and magenta
An artist can create any color by using varying amounts of the three primary colors of paint.
Each primary color of paint absorbs one primary color of light, its complementary color.
13.4 Color and Polarization
Color What pigment(s) (yellow, cyan, or
magenta) would you use to produce the following colors on white canvas that is going to be illuminated with white light?
Yellow Red Green Blue Cyan Magenta
yellow
yellow and magenta
yellow and cyan
magenta and cyan
cyan
magenta
Chapter 13
Subtractive Color Mixing
Section 4 Color and Polarization
13.4 Color and Polarization
Blue Sky and Red Sunset The sky is blue because the atmosphere (N2 and O2) scatters
blue light. Sunsets and sunrises are red because the sunlight passes
through more atmosphere and the longer wavelengths are not scattered as much by the small atmospheric particles.
White clouds? Brown smog?
Polarization
When a light wave vibrates in a variety of directions, the light is said to be unpolarized.
When a light wave's are isolated to a single plane, the light is said to be polarized.
A Polaroid filter polarizes light by blocking part of the vibrations while letting through those that are in a specific plane
http://www.physicsclassroom.com/Class/light/u12l1e.cfm
Polarization
GLARE
http://www.physicsclassroom.com/Class/light/u12l1e.cfm
Polarization
Polarization