li-fi technology and implementation
TRANSCRIPT
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:03/Issue:10/October-2021 Impact Factor- 6.752 www.irjmets.com
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science [1]
LI-FI TECHNOLOGY AND IMPLEMENTATION
Lokesh Kumar Meena*1, Ajay Dureja*2, Aman Dureja*3 *1,2,3Department Of Computer Science And Engineering, PDM University, Haryana, India 124507
ABSTRACT
The practical use of LI-FI Technology in school rooms has been explained in this document. Our brain catches
Visual data more than matter data. Exploitation visual to clarify an inspiration promote a students to get a more
and suitable better sense regarding subject. The most effective of visuals expertise, a want of an economical
method of transmission within machines employed by student and the teachers. The use of WI-FI n other wired
connections are not seems that much economical due to some factors like limitation of speed. So, here is the
introduction of ‘Lightweight Fidelity’ (LI-FI) may be a knowledge transferring Technology to transfer
knowledge using Light-weight ray. Using LI-FI Technology, peak amount of knowledge can be transferred at
extraordinarily peak speed because it provides very more information measure. It additionally ensure security,
potency moreover because quality of devices. Thus, trying the implementation of Technology to reinforce
training expertise of scholars. Each student will get visible inputs on when, what, wherever and the way
something happen and also idea is understood simply and completely. It is low-cost and safe towards organic
structure.
Keywords: Spectrum-Crunch (SC), LED (Light-Emitting-Diode), Orthogonal Frequency Division Multiplexing
(OFDM), LI-FI (Light-Fidelity).
I. INTRODUCTION
This system can encourage each dim-sighted people to perform work. Day to day, our need of wireless
Technology is increases. We have a tendency to perpetually be communicated to some kind of Wireless
Machine. Web provide an awfully vital appearance for exchanging information in everyday life [13]. Due to rise
in Technology need of peak speed information is consistently growing. Currently most network don't seem to
be ample the information measure intensive application. Hence, it typically ends up in a scenario known as
Spectrum-Crunch. So, everybody wanted a better network for transmission of knowledge [1]. So, emerging
event of sunshine fidelity or LI-FI, people are able to use peak demand of in depth quantity of information
transmission at affordable rate. It was initial addressed by academician Harald Hass at 2011 tough guy world
talk. Sunshine Fidelity System used Spectrum of sunshine to transfer information. It is has been determined LI-
FI provide information transmission by peak security. So, the schoolroom implementation of LI-FI Technology
is done to reinforce the training expertise. So, the main advantages is that subject will be simply demonetarised
with visual according to subject and emphasized alongside animation, colour, and sound. Therefore, each kid
will gain interest for their subjects with a clear explanation [2].
II. THEORY
The LI-FI environment is made up of parts such as Rectifier Array, Rectifier Driver Circuit, and Receiver. LED
Array used for lightweight supply [14]. This may be beam at a particularly with peak speed which cannot be
seen by human. Crystal Rectifier Driver received information or data from server then, LED gets information
from Crystal Rectifier Driver that uses signal process technology for conversion of Data Signal to Binary form.
After that Crystal Rectifier start working of transmitting knowledge that is present inside beam of Rectifier at
speedy way. The Photograph Detector received the transferred wave. The Lights Intensity of crystal rectifier
source (LED-BULB) is regenerate it into in an electrical message by Light Detector [3]. Then, message is
regenerate into Binary knowledge using decoding and after that Binary message is amplified. So, binary
knowledge or message is usually a form of multimedia that uses internet for working. LI-FI uses Orthogonal
Frequency Division Multiplexing Modulation methodology to optimize knowledge intensity, Multiple Access
and Energy Potency. LI-FI will quit to 220 Gbps that is kind of over best speed achieved [4].
III. DESIGN
The Infrastructure required to make a sensible category contains main parts sort of a Server, Transmission
Source, Receiving Component, Device to interacting with machines and suitable for classes. For Accessing
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:03/Issue:10/October-2021 Impact Factor- 6.752 www.irjmets.com
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science [2]
information of category from net, server plays an important role [5]. For transferring data, transmitter is
employed.
LI-FI system has basically two main parts, specifically Semiconductor Diode Driver Circuit and Semiconductor
Diode Grid or Array. Semiconductor Diode Array contain peak illuminating semiconductor diode which will
work under Semiconductor Diode Driver Circuit. The Grids are going to be used in at the ceiling in order that it
will offer lightweight at each purpose of the category. The receivers are going to be put in on each. For the
working of all devices or machines we have to attach a separate compatible device to the most machine
(Example LI-FI Dongle) for continuous receiving of information to Receivers [6]. In classrooms, Semiconductor
Diode Grid is used at small angle of inclination which help to expanding sphere of sunshine Signal. For
demonstrating the subject there would be a projector fitted for the student because they do not need to waste
their time for repetition of subject. Projector or a computer can be used to access web [7].
IV. WORKING
LED array are going to be put in on the ceiling of the category. The data are going to be used by Server to LED
Driver Circuit that is able to transfer knowledge. LED can transfer the info at an awfully peak transmission. So,
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:03/Issue:10/October-2021 Impact Factor- 6.752 www.irjmets.com
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science [3]
Binary knowledge is going to be transmitted to Receiver [8]. LED Driver Circuit maintains the working of LED
so dominant flow of information. The received messages are converted into electric signals by Receiver and
store them into tables. Finally, electric Signal is going to be transmitted to final machine with employing
Knowledge Cable [15].
Once when the sunshine is employed on Projector, the magnitude may be reduced in order that transmission
can still works and therefore the transmitted knowledge may be used simply. Sensible Board can discover what
is being trying to written on Board which may be sending to scholars so preserving time for pupils [9].
V. ADVANTAGES It would increases training expertise by Interactive Learning toward scholars.
Information transferred is quicker manner than standard Wired-Network or Wi-Fi.
It will manage significant Data-Traffic.
Students can get subject copy simply.
No harmful radiations.
Free from Radio-Waves.
Signal cab be transferred into all directions.
Uniform flow of information for each purpose.
Quality of machines is enhanced because it can be used from everywhere [11].
VI. DISADVANTAGES Interference can be occurred due to external sunshine or alternative light emitting sources.
Transmission will not happen if Source of sunshine even slightly interrupted.
Receiver could not challenge info because it is a LINE-OF-SIGHT.
Machines are completed fitted wire so here can be limitation within the intensity of information transferred
[12].
VII. EXAMPLE
LI-FI technology is kind of newly so it is not used that much. But, there is an example of LI-FI enabled
schoolroom in Germany. The installation of LI-FI may be a path by ‘fraunhofer heinrich hertz institute’ and
money is given by its own town ‘Stuggart’ [10]. A school has additionally enforced this technology in ‘Kent,
Britain’.
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:03/Issue:10/October-2021 Impact Factor- 6.752 www.irjmets.com
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science [4]
Fig 5. LI-FI implemented school
VIII. CONCULSION
Due to increasing in Technology, scholars got to be cultivated properly. Certain subjects cannot be understand
by traditional way of teaching therefore people want a collective place in order that student will has a
transparent intuition of information. Ancient way of teaching strategies could not provide a deep judgement
concerning it. Therefore, Digital-Technologies are far required to create children perceive. An economical
information transferring Technology will achieve a tough work of transmission significant information. There is
an eternal advancement on going in transmission methodology in several area. Ancient methodology of
teaching needed terribly adept lecturers in order that the student will have higher information. That Visual-
Technology lecturers with a bit less information also can coach children potently. Thus, it doesn't provide a lot
of work load to the employees also.
IX. REFERENCES [1] Kirti Tanwar, Stuti Gupta, Smart Class Using LI-FI Technology, The International Journal Of Engineering
And Science (IJES) || Volume || 3 || Issue || 7 || Pages || 16-18 || 2014 || ISSN (e): 2319 – 1813 ISSN (p):
2319 – 1805www
[2] Ekta, Ranjeet Kaur,”Light Fidelity(LIFI)- A Comprehensive study, IJCSMC, Vol 3,Issue4,April 2014,pg-
475-481.
[3] Yash Khare, Vijay Prakash Tiwari, Akshay B. Patil, Prof. Kumkum Bala, LIFI Technology –
Implementations and Applications, International Research Journal of Engineering Technology
(IRJET),vol 03,issue 04,Apr-2016,e-ISSN-2395-0056,p-ISSN: 2395-0072
[4] S.Tarannum,”Data transmission through Smart Light L transmission Technology” International Journal
of Technical Research and Applications (IJTRA),Vol 4no. 2,pp.136-142,2016.
[5] S.Rajan,A. Reena,”Visible light L transmission” International Journal of computer Trends and
Technology.(IJCTT),Volume-4 Issue-4,Apr 2013.
[6] Alao O.D., Joshua J.V.,Franklyn A.S.,Konolafe O.” Light fidelity(LI-FI):An emerging Technology for The
Future”, IOSR Journal Of Mobile Computing & Application,Volume-3,Issue-3,May-Jun2016,PP-18-28,e-
Issn:239-0050,P-ISSN: 2394-0042.
[7] Arya V,Priya P.,Reshma Omanakuttan, Shilby Baby,”LiFi:The Future Technology in Wireless L
transmission”, International Journal of Advanced Research in Electrical and Electronics And
Instrumentation Engineering Vol 4,Issue 4,April 2015,pISSN-2320-3765,eISSN:2278-8875.
[8] Akash Gupta, Parul Garg, Nikhil Sharma,” Hybrid LiFi-Wi-Fi indoor Broadcasting System”, IEEE
explorer,Feb-2015,eISSN-2166-9589.
[9] R.Karthika, S.Balakrishnan,”Wireless L transmission using Lifi Technology”, SSRG International Journal
of Electronics and Ltransmission Engineering,Volume2,Issue 3,March .
[10] Satyajit Banarjee, Mayank Gupta, Vaibhav Sharma, Alpanna Sahu,”LI-FI –An Implementation to future
Wireless L transmission”,SSRG International Journal of Electronics and L transmission Engineering,
Volume 4,Issue 3,-March -2017,Issn-2348-8549.
[11] https://www.slideshare.net/shwrvppt/LI-FI-tch
e-ISSN: 2582-5208 International Research Journal of Modernization in Engineering Technology and Science
( Peer-Reviewed, Open Access, Fully Refereed International Journal )
Volume:03/Issue:10/October-2021 Impact Factor- 6.752 www.irjmets.com
www.irjmets.com @International Research Journal of Modernization in Engineering, Technology and Science [5]
[12] https://www.techopedia.com/definition/29483/spectrum-crunch
[13] https://www.bartleby.com/essay/LI-FI-Technology-A-Visible-Light-LtransmissionPKC829RAVJ.
[14] G.Savitha and S.Karthikeyan,"Architecture for diverse modulation techniques in SDR", concurrency
computation practice and experience, John wiley & sons, Ltd, February 2019,PP: 1-10.
[15] S.Karthikeyan, S.Jayashri, “Energy Utilization Strategies using Novel Approach in Wireless Sensor
Networks”, International Conference on Software Engineering and Mobile Application Modelling and
Development, Dec 2012, pp: 1-5.