TB_LH60M_Timber_WF_.indd 1 22.05.14 12:05

Log Loader LH 60 M Timber

litronic̀

Operating Weight: 99,600 lb

Engine: 268 HP/200 kW (SAE J1349) 272 HP/200 kW (ISO 9249) Stage IIIB / Tier 4i

2 LH 60 M Litronic Log Loader

Technical Data

EngineRating per ISO 9249 268 HP (200 kW) at 1,800 RPMRating per ISO 9249 272 HP (200 kW) at 1,800 RPMModel Liebherr D936 according to stage IIIB / Tier 4iType 6 cylinder in-line

Bore/Stroke 4.8/5.9 inDisplacement 640 in3

Engine operation 4-stroke diesel Common-Rail turbo-charged and after-cooled reduced emissions

Harmful emissions values in accordance with EPA/CARB-40CFR stage Tier 4 interim

Emission control Liebherr particle filterCooling water-cooled with integrated motor oil coolerAir cleaner dry-type air cleaner with pre-cleaner, primary and

safety elementsFuel tank 198 galEngine idling sensor controlledElectrical system

Voltage 24 VBatteries 2 x 170 Ah/12 VAlternator three phase current 28 V/100 A

Hydraulic ControlsPower distribution via control valves in single block with integrated safety

valvesServo circuit

Attachment and swing with hydraulic pilot control and proportional joystick levers

Travel electroproportional via foot pedalAdditional functions via switch or electroproportional foot pedalsOption proportional control, proportionally acting transmitters

on the joysticks for additional hydraulic functions

Hydraulic SystemHydraulic pump

for attachment and travel drive

two Liebherr variable flow, swashplate pumps (double construction)

Max. flow 2 x 81 gqmMax. pressure 5,076 psi

Hydraulic pump regulation and control

electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensa-tion, automatic oil flow optimizer

Hydraulic pumpfor swing drive reversible, variable flow, swashplate pump, closed-

loop circuitMax. flow 50 gpmMax. pressure 5,511 psi

Hydraulic tank 77 galHydraulic system 235 galHydraulic oil filter 2 main return filters with integrated partial micro

filtration (5 μm)Hydraulic oil cooler compact cooling system consisting cooling unit for

water, hydraulic oil and charge air with stepless thermostatically controlled fan

MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum material handling and heavy-duty jobs

S (Sensitive) for precision work and lifting through very sensitive movements

E (ECO) for especially economical and environmentally friendly operation

P (Power) for maximum digging power and heavy duty jobsP+ (Power-Plus) for highest performance and for very heavy duty

applications, suitable for continuous operationTool Control (Option) ten preadjustable pump flows and pressures for add

on tools

Swing DriveDrive Liebherr swashplate motor in a closed system with

integrated brake valveTransmission Liebherr planetary reduction gearSwing ring Liebherr, sealed single race ball bearing swing ring,

internal teethSwing speed 0 – 8.0 rpm steplessSwing torque 88,500 lbf ftBrake holding brake (spring applied – pressure released)Option pedal controlled positioning swing brake

LH 60 M Litronic Log Loader 3

Technical Data

Operator’s CabCab safety cab structure with individual windscreens or

featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspen-sion, sounddamping insulating, tinted laminated safety glass, separate shades for the sunroof window and windscreen

Operator’s seat Standard air cushioned operator’s seat with headrest, lap belt, seat heater, manual weight adjustment, adjustable seat cushion inclination and length and mechanical lumbar vertebrae support

Operator’s seat Comfort (Option)

in addition to operator’s seat standard: lockable hori-zontal suspension, automatic weight adjustment, adjustable suspension stiffness, pneumatic lumbar vertebrae support and passive seat climatisation with active coal

Operator’s seat Premium (Option)

in addition to operator’s seat comfort: active electronic weight adjustment (automatic readjustment), pneu-matic low frequency suspension and active seat clima-tisation with active coal and ventilator

Control system joysticks with arm consoles and swivel seatOperation and displays large high-resolution operating unit, selfexplanatory,

colour display with touchscreen, video-compatible, numerous setting, control and monitoring options, e.g. air conditioning control, fuel consumption, machine and tool parameters

Air-conditioning automatic air-conditioning, recirculated air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; recirculated air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures

Noise emissionISO 6396 LpA (inside cab) = 71 dB(A)2000/14/EC LWA (surround noise) = 105 dB(A)

UppercarriageType slewing platform made from high-strength steel plate,

designed for the toughest requirements

UndercarriageType torsion-resistant box design made from high-strength

steel plate, designed for the toughest requirementsDrive variable flow swashplate motor with automatic brake

valveTransmission oversized two speed power shift transmission with

additional creeper speedTravel speed 0 – 6.2 mph stepless (creeper speed)

0 – 12.4 mph steplessDriving operation automotive driving using accelerator pedal, cruise

control function: storage of variable accelerator pedal positions

Axles 154,320 lb drive axles; manual or automatic hydrauli-cally controlled front axle oscillation lock

Service brake disc brake, two circuit travel brake system with accu-mulator

Holding brake disc brakeStabilization stabilizer blade front

stabilizer blade rearFour wheel steering standardSteering reversal control standard

AttachmentType high-strength steel plates at highlystressed points

for the toughest requirements. Complex and stable mountings of attachment and cylinders

Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorption

Bearings sealed, low maintenance

Complete MachineLubrication central lubrication system for uppercarriage and

attachment, automatically

4 LH 60 M Litronic Log Loader

11'1"

10'11"

5'6"5'11"

20"26.5"

21'1"

11'10"

15'5"

16'2"

6'5"

11'10"

10'10"

10'3"

16.5"

11'10"

12'4"

US_H0693

5'6"

22'11"

20"

6'5"

26.5"26.5"

5'6"

16.5"

11'10"

12'4"

US_H0696

20"

R 9'10"

30°

R 21'

R 23'

US_H0695

Dimensions

Tires 18.00-25

Turn Radius

LH 60 M Litronic Log Loader 5

Choice of Cab Elevation

B

D

H0691

CC1

Cab Elevation LFC (Rigid Elevation)

Cab ProtectionIntegral Guard

Increase type LFC 80 LFC 120Height mm 2’ 7” 3’11”B mm 13’10” 15’ 2”C mm 15’ 5” 16’ 9”C1 mm 16’ 2” 17’ 6”D mm 2’ 6” 2’ 6”

A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be removed and replaced by a transport device. On this machine dimension C is 13’10”.

6 LH 60 M Litronic Log Loader

Attachment GA11

Dimensions

Operating WeightThe operating weight includes basic machine with prop-up blade, rigid cab elevation, 4 pneumatic tires, industrial-type straight mono boom 23’ and industrial-type angled stick 14’9”.

with wood grapple GMH 50/3.83 yd2 (standard overlapping) 99,600 lb

ft

Undercarriage

10 ft 15 ft 20 ft 25 ft 30 ft 35 ft

ft in

45Stabilizers raised (drive operation) 30,4* 30,4*

8’ 1”Stabilizers raised 30,4* 30,4*Stabilizer blade down 30,4* 30,4*Stabilizer blades down 30,4* 30,4*

40Stabilizers raised (drive operation) 26,5* 26,5* 20,3* 20,3* 20,3* 20,3*

20’ Stabilizers raised 26,5* 26,5* 20,3* 20,3* 20,3* 20,3*Stabilizer blade down 26,5* 26,5* 20,3* 20,3* 20,3* 20,3*Stabilizer blades down 26,5* 26,5* 20,3* 20,3* 20,3* 20,3*

35Stabilizers raised (drive operation) 28,3* 28,3* 25,2 25,8* 17,4 20,0* 16,1 17,7*

26’ 1”Stabilizers raised 28,3* 28,3* 25,8* 25,8* 20,0* 20,0* 17,7* 17,7*Stabilizer blade down 28,3* 28,3* 25,8* 25,8* 20,0* 20,0* 17,7* 17,7*Stabilizer blades down 28,3* 28,3* 25,8* 25,8* 20,0* 20,0* 17,7* 17,7*

30Stabilizers raised (drive operation) 29,4* 29,4* 25,1 28,7* 17,6 21,8 13,0 16,1 12,8 15,9

30’ 2”Stabilizers raised 29,4* 29,4* 28,7* 28,7* 22,0 25,4* 16,2 17,2* 16,0 16,6*Stabilizer blade down 29,4* 29,4* 28,7* 28,7* 23,0 25,4* 17,0 17,2* 16,6* 16,6*Stabilizer blades down 29,4* 29,4* 28,7* 28,7* 25,4* 25,4* 17,2* 17,2* 16,6* 16,6*

25Stabilizers raised (drive operation) 31,6* 31,6* 24,6 30,8 17,3 21,5 13,0 16,1 11,0 13,8

33’ Stabilizers raised 31,6* 31,6* 30,8 30,9* 21,7 26,5* 16,2 20,2 13,8 16,2*Stabilizer blade down 31,6* 31,6* 30,9* 30,9* 22,7 26,5* 17,0 23,2* 14,4 16,2*Stabilizer blades down 31,6* 31,6* 30,9* 30,9* 25,3 26,5* 18,9 23,2* 16,1 16,2*

20Stabilizers raised (drive operation) 32,8* 32,8* 37,5 40,1* 23,7 29,8 16,8 21,0 12,7 15,9 10,0 12,5

34’11”Stabilizers raised 32,8* 32,8* 40,1* 40,1* 29,6 32,6* 21,0 26,3 15,9 19,8 12,5 15,6Stabilizer blade down 32,8* 32,8* 40,1* 40,1* 31,1 32,6* 22,1 27,3* 16,7 23,4* 13,1 16,1*Stabilizer blades down 32,8* 32,8* 40,1* 40,1* 32,6* 32,6* 24,6 27,3* 18,6 23,4* 14,7 16,1*

15Stabilizers raised (drive operation) 34,8 45,4 22,4 28,5 16,2 20,3 12,4 15,5 9,8 12,3 9,4 11,8

36’ Stabilizers raised 43,4 45,8* 28,0 34,7* 20,2 25,4 15,5 19,4 12,3 15,4 11,7 14,7Stabilizer blade down 45,8* 45,8* 29,5 34,7* 21,2 28,2* 16,2 23,6* 12,9 19,8* 12,3 16,5*Stabilizer blades down 45,8* 45,8* 33,2 34,7* 23,8 28,2* 18,2 23,6* 14,5 19,8* 13,8 16,5*

10Stabilizers raised (drive operation) 32,1 42,4 21,2 27,1 15,5 19,6 12,0 15,1 9,6 12,2 9,1 11,5

36’ 5”Stabilizers raised 40,1 48,8* 26,5 33,9 19,4 24,5 15,0 18,9 12,0 15,2 11,4 14,4Stabilizer blade down 42,5 48,8* 27,9 36,1* 20,4 28,6* 15,8 23,5* 12,7 19,2* 12,0 17,2*Stabilizer blades down 48,7 48,8* 31,6 36,1* 22,9 28,6* 17,7 23,5* 14,2 19,2* 13,5 17,2*

5Stabilizers raised (drive operation) 26,5* 26,5* 20,2 26,1 14,9 19,0 11,7 14,8 9,5 12,0 9,1 11,5

36’ 1”Stabilizers raised 26,5* 26,5* 25,3 32,7 18,7 23,8 14,6 18,5 11,9 15,0 11,4 14,4Stabilizer blade down 26,5* 26,5* 26,7 35,7* 19,7 28,1* 15,4 22,7* 12,5 17,8* 12,0 16,4*Stabilizer blades down 26,5* 26,5* 30,3 35,7* 22,2 28,1* 17,3 22,7* 14,1 17,8* 13,5 16,4*

0Stabilizers raised (drive operation) 25,5* 25,5* 19,7 25,6 14,6 18,7 11,5 14,6 10,2 12,9

33’ Stabilizers raised 25,5* 25,5* 24,6 32,0 18,3 23,4 14,4 18,3 12,7 16,1Stabilizer blade down 25,5* 25,5* 26,0 32,9* 19,2 26,0* 15,1 20,6* 13,4 17,3*Stabilizer blades down 25,5* 25,5* 29,6 32,9* 21,8 26,0* 17,1 20,6* 15,1 17,3*

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacityThe lift capacities on the stick end without attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/– 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % (according to EN 474-5 in drive operation only 60 %) of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum per-missible lifting capacity of the load hook.

30

45

40

35

25

20

15

10

5

0

-5

-10

-15

87

5

3

1

10

121314

11

9

15H0692

354045 30 25 20 15 10 5 0

12 1114 13 10 9 8 7 6 5 4 3 2 1 0

6

4

2

0

-2-1

-3

-4-5mft m

ft

24'11"

36'5"

16'2"

US_H0694

12'10"

LH 60 M Litronic Log Loader 7

Variety of Tools

Wood GrapplesGrapple model GMH 80 (direct attached, XHD suspension reinforced, 11.8”, plug-in coupling, two-motor, soft start)Claw width ft in 2’10” 2’10” 2’10” 2’10”Size in2 2,480 2,945 3,410 3,875Height of grapple, closed ft in 11’5” 11’10” 12’4” 12’8”Weight lb 4,685 4,785 4,830 4,950

Wood GrapplesGrapple model GMH 120 (direct attached, XHD suspension reinforced, 11.8”, plug-in coupling, two-motor, soft start)Claw width ft in 2’10” 2’10” 2’10” 2’10” 2’10”*Size in2 3,875 4,340 4,960 5,580 2,170Height of grapple, closed ft in – – 14’ – 11’11”Weight lb – – 5,150 – 5,565

* Two over one grapple

Wood GrapplesGrapple model GMH 50, standard overlapping (direct attached, XHD suspension reinforced, 11.8”, plug-in coupling, two-motor, soft start)Claw width ft in 3’3” 3’3” 3’3” 3’3”Size in2 3,875 4,340 4,960 5,580Height of grapple, closed ft in 8’2” 8’7” 9’ 9’6”Weight lb 4,695 4,860 4,995 5,125

Wood GrapplesGrapple model GMH 50, combi grapple (direct attached, XHD suspension reinforced, 11.8”, plug-in coupling, two-motor, soft start)Claw width ft in 3’3” 3’3”Size in2 4,960 5,580Height of grapple, closed ft in 9’3” 9’7”Weight lb 5,150 5,192

Wood GrapplesGrapple model GMH 50, heart shaped straight design (direct attached, XHD suspension reinforced, 11.8”, plug-in coupling, two-motor, soft start)Claw width ft in 3’3” 3’3” 3’3” 3’3”Size in2 3,410 3,875 4,340 4,960Height of grapple, closed ft in 8’6” 8’11” 9’3” 9’9”Weight lb 4,850 4,980 5,115 5,270

Equipment

UndercarriageStabilizer blade rear •Stabilizer blade rear and front +Four wheel steering •Shuttle axle lock, automatic •Tires, variants +Protection for oscillating axle cylinders +Tool equipment, extended •Two lockable storage boxes •

UppercarriageRefuelling system with filling pump +Railing on uppercarriage +Main battery switch for electrical system •Protection for counterweight (both sides) +Protection for headlights +Protection for uppercarriage (both sides) +Protection for rear lights +

Hydraulic SystemElectronic pump regulation •Liebherr hydraulic oil from – 4 °F to + 104 °F •Liebherr hydraulic oil, biologically degradable +Magnetic rod in hydraulic tank •Bypass filter +Preheating hydraulic oil +

EngineFuel anti-theft device +Liebherr particle filter •Reversible fan drive, fully automatic +Air pre-filter with dust discharge +Protective grid in front of cooler intake •Preheating fuel +Preheating coolant +Preheating engine oil +

Operator’s CabCab lights rear, halogen +Cab lights rear, LED +Cab lights front, halogen •Cab lights front, LED +Operator’s seat Standard •Operator’s seat Comfort +Operator’s seat Premium +

Operator’s CabDriving alarm (acoustic signal is emitted during travel, can be switched ON/OFF) +Fire extinguisher +Joystick steering +Cab elevation, rigid (LFC) •Automatic air conditioning •Electric cooler +LiDAT Plus (extended Liebherr data transfer system) * •Bullet proof glass +Positioning swing brake +Proportional control +Radio Comfort (control via display) +Preparation for radio installation •Back-up alarm (acoustic signal is emitted traveling backward, can not be switched off) +Warning beacon on cab +Windscreen wiper, roof +Integral guard •Auxiliary heating, adjustable (week time switch) +Flashing light (xenon) +Electronic immobilizer +

AttachmentBoom lights, 2 pieces, halogen •Boom lights, 2 pieces, LED +Stick lights, 2 pieces, halogen •Stick lights, 2 pieces, LED, with protection +Boom shutoff, ascending •AutoLift +Height limitation and stick shutoff, electronically +Boom cylinder cushioning •Industrial stick with quick coupling +Stick camera (with separate monitor), bottom side, with protection +Liebherr quick coupler, hydraulic or mechanical +Pipe fracture safety valves hoist cylinders •Pipe fracture safety valve stick cylinder •Protection for piston rod, hoist cylinder +Retract stick without pressure +Overload warning device +

Complete MachineLubrication

Lubrication undercarriage, manually – decentralized (grease points) •Central lubrication system for uppercarriage and attachment, automatically •Central lubrication system for undercarriage, automatically +

Special coating, variants +Monitoring

Rear view monitoring with camera •Side view monitoring with camera +

• = Standard, + = Option* = optionally extendable after one year

Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.

Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA S +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: info.lce@liebherr.com www.facebook.com/LiebherrConstruction

Prin

ted

in G

erm

any

by T

ypod

ruck

R

G-B

K-R

P

LHB

/VF

1121

2912

-0.5

-11.

14_e

nUS

A

ll ill

ustr

atio

ns a

nd d

ata

may

diff

er fr

om s

tand

ard

equi

pmen

t. S

ubje

ct to

cha

nge

with

out n

otic

e.