lf3xt programming v1.9
TRANSCRIPT
-
7/24/2019 LF3XT Programming v1.9
1/2
CUI Compact User Interface
Liteflux LF3XT
Programming Flowchart
Legend1C 1 Click2C = 2 Clicks, etc
PH = Push & Hold
How to use this Flowchart
* There are two different flowcharts. One for CUI Mode andone for FUI Mode.1. Always start with the light off or at Start Here..
2. If you are lost in the programming tree, a couple of seriesof 3 Clicks will exit without saving anything.3. Get familiar with CUI before programming FUI
4. When the light changes modes or remembers a setting itwill blink twice.5. Programming Suggestion - Find the option you want to set
then work backwards until you get back to a root mode.
CPF Member Budman231Version 1.9
* CUI is the default mode out of the box.
See FUI
Flowchart
LF3XTOFF
1C
1C
Last
UpperRampSetting
RampBrightness
Up/Down
2%
Brightness
2C
2C
4C
ToggleTactical
Signal
4C - On/Off
(2 Flashes)
PH
1C+PH
RampBrightness
Up/Down
PH
ToggleCUI/FUI
5C+PH
5C
2C
1stBlink Integer
2ndBlink Decimal
Ex : 3 Blinks then 2
= 3.2 Volts
Battery Voltage Report
ONLast Ramp
Setting
Start
Here
1C+PH100%
Brightness
-
7/24/2019 LF3XT Programming v1.9
2/2