Tekla Structures Basic Training

Tekla Structures Basic Training Tekla Structures 10.0 February 13, 2004 Copyright 2004 Tekla Corporation

Contents 11. Assembly and Single Part Drawings / Bn v t hp v chi tit11.1. Intergration between Drawings and the Model / Tnh thng nht gia bn v v m hnhAssembly and Single-Part Drawings / Bn v t hp v chi tit11.2. Create Drawings Using Drawing Wizards / To bn v bng cng c to bn v nh sn.Functionality of Drawing Wizards / Chc nng ca cng c to bn v

Create Single-Part Drawings of Selected Parts / To bn v chi tit cho cc cu kin c la chn

Create Assembly Drawings of All Parts / To bn v t hp cho mi cu kin

11.3. Edit Drawing Properties / iu chnh tnh cht bn v

11.4. Create New Drawing Wizard / To cng c to bn v mi11.5. Create Drawings Manually / To bn v bng tayCreate Assembly Drawings / To bn v t hp

11.6. Edit Drawings Manually / iu chnh bn v th cng11.7. Updating Assembly and Single-part Drawings / Cp nht bn v t hp v chi titChanges in the Model / Cc thay i trong m hnh

11.8. Cloning Drawings / Cc bn v v tnh11 Bn v t hp v chi titTrong bi nyChng ta s gii thiu cu to ca bn v t hp v chi tit trong Xsteel.Trc ht chng ta to bn v chi tit v t hp bng cch s dng cng c to hnh bn v nh sn (Cng c ny l cch t ng to cc bn v t chi tit n t hp cu kin).Sau chng ta iu chnh tnh cht bn v v to cng c to bn v mi. Cng c to bn v s s dng cc tnh cht iu chnh v lc la nhng tnh cht c xc nh trong bi hc trc. Sau chng ta s th hin cch m bn v san th cng c cu to ra sao. Chng ta cng s ch ra cch cp nht cc nh hng ca bn v.Kim sat phin bn ca cc lai bn v c trnh by trong bi 10 v cc nguyn tc lm vic vi bn v.11.1 Tnh thng nht gia bn v v m hnhBn v t hp v chi titBn v cu to chi tit l bn v gia cng tng cu kin ring r trong m hnh. Bn v cu kin t hp l bn v gia cng trong cc cu kin chi tit c t hp li thnh cu kin thp cn c gia cng ch to.Tt c cc khng gian bn v chi tit hay t hp l khng gian hin hu m cu kin hin hu trong m hnh.Khi m hnh cha cc cu kin ng nht bt k, bn v l hnh nh ca mt trong nhng cu kin ny. Tuy nhin bn v cha ng nhng thng tin v s lng cc cu kin ng dng. Nu cu kin chnh trong bn v b chnh sa hoc xa b, khi n s nhn mt k hiu v tr mi trong trnh nh s k tip. Xsteel sau s t ng gn bn v gc thnh cu kin khc vi k hiu v tr c.Xsteel tch hp cc bn v v bo co vo m hnh. iu ny c ngha l kch thc v nhn mc trong bn v lun ph hp nhau. V thng tin trong bn v v bo co xut pht trc tip t m hnh, bn khng th xa bt k cu kin hoc bu lng t bn v. Bn c th lc la ra cc cu kin v bu lng trong bn v hoc du chng i.Bn c th to bn v v bo co ti bt k giai an no ca d n. Nu bn thay i m hnh, Xsteel cp nht cc bn v khi bn chy chng trnh nh s li.Help: Drawing > Introduction to drawings > Basics.

11.2 To bn v bng cng c to bn v nh snMt khi bn nh s m hnh xong bn c th to bn v t hp v chi tit t m hnh ny. Cng c to bn v l phng cch hu hiu nht to bn v trong Xsteel. Cng c ny t ng xut bn v cc chi tit khc nhau nh dam ct, v khung ging. Bn c th dng cng c ny to bn v cu kin chi tit, t hp hoc bn v a dng c ci t sn trong chng trnh.Bn c th s dng cng c ci sn ny hoc iu chnh hoc to mi cng c to bn v mi cho ring bn. Trong hp thai Wizard c lit k tt c cc tp tin c sn.

c thm thng tin xem trong:Help: Drawing > Getting started with drawings > Using drawing wizardsHelp: Drawing > Getting started with drawings > Drawings reference > File > WizardCng c to bn v khng th dng to bn v cho b tng c ti ch.

Chc nng ca cng c to bn v.i vi tng lai cu kin trong m hnh, cng c to bn v s t ng thc hin cc bc sau: bng cch to cng c ph hp vi tnh cht chn la cho d n bn c th t ng to mi bn v chi tit v t hp ca cu kin theo ng tnh cht xc nh trc.

Nhng iu kin nh trc khi s dng cng c to bn v: Trnh nh s s t ng cp nht tp tin ng vi cng c to bn v phi tn ti Cc tnh cht c lu phi tn ti trong tp tin hin hu. Nhng b lc c lu phi tn ti trong tp tin hin hu.Cc cu kin trong m hnh c b lc la chn phi tn ti.

1. Xc nh chng lai bn v c to (chi tit, t hp, hoc a dng)2. Xc nh cc tnh cht bn v c s dng3. Bng b lc cho, chn ra cc cu kin b tr vo cc bn v.4. To ra cc bn vKhi bn s dng b cng c ny, bn c th chn cng c to ra bn v cho mi chi tit hay ch nhng cu kin c chn.To bn v chi tit cho cc cu kin c la chn.By gi chng ta s to b cng c to bn v cho cc chi tit ca cc dm thp v bn thp c chn.To bn v chi tit cho dm thp 1. M m hnh kt hp2. La chn BEAM_STEEL t danh sch s xung c sn. La chn b lc Select filters

3. La chn tan b m hnh bng cch la chn mt khu vc.4. xem s cu to ca bn v, m danh sch bn v bng cch nhp chn vo biu tng Open drawing list

5. La chn trnh File>Wizard t trnh n hoc nhp chn vo biu tng Wizard trn thanh cng c Standard m hp thai Wizard

6. La chn tnh cht Single drawings trn trang Wizards

7. Nhp chn vo nt Create from selected8. Trong danh sch bn v kim tra bn v chi tit c ta l BEAM c to ra.

9. M mt vi bn v chi tit kim tra.

To bn v chi tit t thp tmThc hin theo phng php trn, by gi chng ta s to cc bn v chi tit ca thp tm.1. La chn b lc PLATE2. La chn khu vc cha tan b m hnh3. La chn Single Drawings trn trang Wizards trong hp thai wizard.4. Nhp chn vo nt Create from selected5. trong danh sch bn v kim tra rng cc bn v chi tit c ta PLATE c to ra cha.6. M mt vi bn v chi tit xem.

S dng phng php pht ha trn bn c th to cc bn v chi tit cho bt k cu kin thp no c la chn trong m hnh (ct, khung ging, thp gc.) Nn to tt c cc bn v chi tit v t hp bng cng c wizard nhay c kh ch l mt cu kin n l.Xsteel hin th hp thai Cancel trong sut qu trnh to bn v. Nhp chn nt OK trong hp thai ny chm dt qu trnh to bn v.

to bn v chi tit t mi cu kin thp ngay mt lc bn c th s dng ty chn Create from all.To bn v t hp cho mi cu kinK tip chng ta s to bn v t hp cho mi cu kin bng cch s dng cng c to bn v khc. to mi bn v t hp ta phi:To bn v t hp1. nhp chn vo biu tng Wizard m hp thai Wizard.

2. La chn mc Assembly Drawings trn trang Wizards.3. Nhp vo nt Create from all

S dng nt Create from all to cc bn v t tan b m hnh cng mt lc. Ch l Xsteel s khng to cc bn v chi tit hoc t hp t cc cu kin b tng.

4. Trong danh sch bn v kim tra li cc bn v t hp c to chnh xc (sp xp danh sch bn v theo ta Title)

5. M mt vi bn v t hp (c tn khng phi l STANDARD) xem. cc cu kin khng ph hp vi tnh cht bn v hoc b lc c lit k trong tp tin wizard, cng c to bn v wizard c xc nh trc s dng cc tnh cht STANDARD.

La chn cc cu kin c tiu l STANDARD.1. La chn bn v vi tiu STANDARD trong danh sch bn v.2. nhp chn vo nt Filter Select parts

cc cu kin c kt hp vi bn v c la chn c t sng ln trong m hnh. Bn s tm thy l v d th hin cc vt th nh thanh ging c t sng trong m hnh (cng c to bn v wizard khng c yu cu i vi h ging).M bn v ging1. La chn mt ging ng trn li trc A2. Nhp chn vo nt Display-All m bo l mi bn v c th hin trn danh sch.3. Nhp chn vo nt Filter By parts

Danh sch bn v vo lc ny ch th hin bn v t hp c to t thanh ging c la chn trong m hnh.4. M bn v.

Bn v ging c to theo tnh cht tiu chun v theo cc tiu chun khng c xc nh cho h ging. B cng c to bn v khng to mt bn v sao cho bt k cu kin no c sn nh bn v chi tit hoc bn v t hp.

11.3 iu chnh tnh cht bn vBy gi chng ta s xc nh tnh cht bn v cho c h ging ng v nm ngang v lu cc tnh cht ny sau ny s dng trong cng c to bn v.Th d nh chng ta s m mt thanh ging ng iu chnh. Bng cch s dng bn v ny ta s lu tr cc tnh cht i vi ging ngang. Sau chng ta s iu chnh thm mt s tnh cht v lu li cho thanh ging ng.Chng ta s iu chnh bo v kch thc v tnh cht ca nhn mc cu kin. minh ha nh hng ca lnh vc n l, chng ta trc ht phi loi b nhng kch thc hin hu trn bn v.vic iu chnh m chng ta s lm ch l nhng th d cch s dng cc tnh cht ca bn v. Bn v han thin cui cng m bn c ty thuc vo mi trng m bn s dng v c th khng ging vi th d ny.Nghin cu trc tuyn h tr thm thng tin trn mi lnh vc ring bit c sn trong tnh cht ca bn v.Help: Drawing > DimensioningHelp: Drawing > Drawing Properties Bt c khi no c th bn nn iu chnh bn v bng cch thay i tnh cht bn v. Nhng thay i ny vn cn lu li khi bn v c to mi do thay i m hnh. Bn cng c th lu tnh cht bn v trong cng c to bn v.

Ti tnh cht khng c kch thc.1. Nhp phi chut ln bn v v chn nt Properties m hp thai Assembly drawing properties.2. Ti tnh cht c xc nh trc no_dimensions.3. Nhp chn Modify

Lc ny bn v xut hin m khng c bt k kch thc no v ch c khung nhn chnh l nhn thy.Theo mc nh, Xsteel to khung nhn ph ch khi cn thit th hin kch thc trong bn v.Tuy nhin, theo mc tiu chng ta mun c c hnh chiu ng v hnh chiu bng trong bn v thanh ging bt k l kch thc c cn hay khng.Hin th c hnh chiu ng v chiu bng1. Trong hp thai Assembly drawing properties nhp chn nt View2. Chn vo ty chn on i vi hnh chiu ng v hnh chiu bng.3. Nhp chn vo Apply v sau l nt Modify

Ngay khi hnh chiu ng v chiu bng s c hin th.

Kch thc u tin m chng ta o l kch thc chiu di tng th.Kch thc chiu di tng th ca cu kin chnh1. Trong hp thai Assembly drawing properties nhp chn Dimensioning>Part dimensions .2. Nhp chn Once i vi Main part overall dimensions 3. Nhp vo nt Apply v sau l nt Modify

Kch thc chiu di tng th ca cu kin chnh xut hin.Sau chng ta s o thm kch thc gia 2 bu lng ngai cng.Cc bu lng ngai cng1. trang Bolt dimensions la chn Assembly i vi Extreme bolts2. Nhp chn Apply v Modify

Khong cch gia cc bu lng ngai cng xut hinK ta tip tc xc nh kch thc ca vt ct ca cu kin chnh.Hnh dng cu kin chnh o kch thc mt ct ca cu kin chnh.1. Trn trang Part dimensions bt nt Main part shape v tr On2. Nhp chn vo Apply v sau nhp vo Modify.Help: Drawing > Dimensioning > Dimension planes

Kch thc ca mt ct xut hin theo kch thc tuyt i. iu ny do loi kch thc c xc nh theo trang Assembly Dimension propertiesThay i lai kch thc t tuyt i sang tng i.1. Trong hp thoi Assembly drawing properties nhp chn vo Dimension2. Thay i tnh cht ca Dimension types / In X direction thanh gi tr tng i (xem hnh bn di).3. Nhp chn Apply v sau nhp chn Modify

Kch thc ca mt ct ca cu kin chnh by gi xut hin theo kch thc tng i. Bng cch bt u bin mi trng, XS_NO_RELATIVE_SHAPE_DIMENSIONS, vt qu kch thc hnh dng lun l tng i mc d ny thng c chn trong hp thai Dimension properties.

c tnh bo vBn c th bo v vng bn v ngn cn vn bn hoc kch thc c b tr y. Bng cch ny bn c th ngn cn nhn mc cu kin (1012 trong hnh trn) nm chng ln ng kch thc. Trong trng hp khi Xsteel khng th kim ra v tr trng cu kin ny nm chng ln cu kin kia mc du bt c tnh bo v trong hp thai.

1. Trong hp thai Assembly drawing properties nhp chn Protection.2. La chn cc kim tra bn di. Nhng la chn ny xc nh nhn mc cu kin khng lm chng ln ng kch thc ca nhau.

3. La chn kim tra nh hnh bn di. Nhng la chn ny xc nh cc ng kch thc khng chng ln ln cc cu kin khc.

4. Nhp chn Apply v sau chn Modify

By gi chng ta s lu li nhng c tnh ng dng cho thanh ging ngang. K chng ta s tip tc iu chnh bn v mt cht v lu cc c tnh ny cho thanh ging ng.i vi thanh ging ng, chng ta mun thy kch thc ni ti ca bu lng cu kin th cp v thay i nhn mc khung mt cht.Lu mi cc tnh cht i vi ging ngang (bracing_H)1. Nhp bracing_H trong Name: nm trong hp thai Assembly drawing properties2. Nhp bracing_H_TR trong Save as v nhp chn nt Save as

By gi chng ta thm kch thc bu lng cho thanh ging ng.Kch thc ni ti cho bu lng cu kin th cp1. Trong trang Assembly>Dimensioning properties>Bolt dimensions la chn Internal cho loi Secondary part bolt internal dimensions.2. Nhp chn nt Apply v sau nt Modify

Kch thc khang cch bu lng trn bn m lin kt s xut hin.

Thay i nhn mc ca cu kin khung.K tip chng ta thay i nhn mc cu kin khung thnh hnh ch nht.Trn hp thai Assembly part mark properties/ General tab:1. Thay i ni dung trong Frame around mark thanh hnh ch nht (rectangular).2. Nhp chn Apply v sau nhp chn ModifyNhn mc cu kin khung by gi thay i dng hnh ch nht.

Lu tr mi cc tnh cht cho ging V (bracing_V)1. Nhp bracing_V trong Name: trong hp thai Assembly drawing properties2. Nhp vo bracing_V_TR trong Save as v nhp vo nt Save as

11.4 To cng c to bn v miK tip chng ta s to mt cng c to bn v mi ph hp vi b lc c la chn to trc y v cc tnh cht bn v c sn. Chng ta s thm 2 yu cu bn v mi to cc thanh ging ng v nm ngang v s dng nhng tnh cht mi ny xc nh chng. Chng ta cng s lu li cc tnh cht ny cho cc cu kin khng ph hp vi cng c c th hin nh INCOMPLETE trong danh sch bn v.To cc tnh cht INCOMPLETE1. Ti tnh cht bn v Standard2. iu chnh Name thnh INCOMPLETE3. Lu mi cc tnh cht ny vi tn INCOMPLETE

By gi chng ta s s dng cng c to bn v hin hu trn c s cu to cng c Wizard ca mnh. to mt cng c Wizard mi, chng ta thc hin cc bc sau:1. M mt tp tin cng c Wizard hin hu2. lu li vi ttn khc3. iu chnh tp tin mi ny4. Kim tra chc nng ca tp tin cng c Wizard mi ny.Nhng ng dn sau cung cp thm cc thng tin v nhng ci t cho cng c wizard theo mun v nhng ni dung ca tp tin wizard.Help: System > Files and folders > Customizing Tekla Structures > Creating wizard files

Help: System > Files and folders > Log files > Wizard logTo mt tp tin cng c Wizard mi:M tp tin cng c Wizard hin hu1. Nhp chn vo biu tng Wizard m hp thai Wizard.

2. Nhp chn Assembly Drawings trong trang Wizards3. Nhp chn vo nt Edit m tp tin cng c Wizard trong trnh cng c iu chnh vn bn.

Lu tp tin cng c Wizard vi tn khc1. Nhp chn lnh Save as trong trnh n File ca trnh cng c iu chnh vn bn vi mt tn khc.2. Lt duyt ti th mc thuc tnh trong th mc m hnh, nhp vo tn tp tin ASSEMBLY_TR.dproc v nhp nt Save. Ch l ui tp tin c phn m rng l .dproc.3. Kim tra li tp tin ASSEMBLY_TR.dproc c to trong th mc con thuc tnh attributes bng cch chn lnh Open model folder ca trnh n Tools Tp tin cng c Wizard nh trc c b tr ti th mc ..\countries\environment\system. Trong th mc h thng, tp tin cng c wizard sn sng cho vic p dng cho mi m hnh. Cc tp tin cng c wizard lu v iu chnh trc y c t trong cng mt th mc, tr phi bn xc nh mt v tr th mc khc (nh th mc ca m hnh).

c tp tin cng c wizard mi trong hp thai Wizard, bn cn ng v m li m hnh.

iu chnh tp tin cng c wizard.1. M hp thai Wizard2. La chon tp tin ASSEMBLY_TR trong trang Wizards v nhp chn nt Edit3. La chn yu cu ca mt bn v hin hu i vi x g (th hin bng bt sng nh bn di) v sao lu n lm 2 ln theo yu cu gc.

4. iu chnh li yu cu m bn sao chp ph hp vi tiu chun ca ging ng v ging ngang th hin mu vng bn di.

Xa b cc yu cu5. Xa b cc yu cu khng ph hp vi b lc m chng ta chn. Khung dn Cu thang

K tip i vi d n ny chng ta thay i mi yu cu s dng b lc chn v xc nh trc .Thay i b lc la chn6. Thay i b lc la chn i vi cu kin thp trong d n ny B lc ct (column_filter) thnh COLUMN_STEEL B lc dm (beam_filter) thnh BEAM_STEEL. B lc x g (purlin_filter) thnh PURLIN. v.v..

Yu cu i vi phn cn li ca bn v t hp7. iu chnh yu cu cui cng cho bn v t hp/* Create rest of assembly drawings */ /set_drawing_type(assembly) /set_drawing_attributes(INCOMPLETE) /set_filter(standard) /create_drawings() /Lu li tp tin cng c wizard8. Nhp chn Save lu li nhng thay i v ng li trnh iu chnh vn bn. Tp tin cng c wizard gm c vi b yu cu bn v. Yu cu ny l quan trng, k t khi Xsteel ch to mt bn v cho tng cu kin c la chn. Yu cu u tin ny ph hp vi tiu chun b lc c chn ng dng.

By gi chng ta chc chn l tp tin cng c mi wizard vn hnh chnh xc.ng dng tp tin cng c wizard ring1. Xa b mi bn v t hp trong danh sch bn v.2. M hp thoi cng c wizard, la chn tp tin ASSEMBLY_TR v nhp chn vo Create from all.

3. Kim tra li danh sch bn v xem cc tnh cht bn v c c s dng chnh xc khng. Tiu ca cc bn v t hp c to. CHA HAN CHNH Thanh ging ngang (bracing_V), thanh ging ng (bracing_V)11.5 To bn v bng tayTrong Xsteel, bn c th to cc bn v chi tit v bn v t hp bng cch ti v p dng cc tnh cht bn v nh trc cho bn v b tr, cho kch thc, nhn mc, v.v..cho cc cu kin c la chn. Qu trnh ny c gi l cch to bn v th cng i nghch vi cch to bn v bng cng c wizards.Cc bc cu to bn v bng th cng v c bn ging vi cc bc c s dng trong cng c wizards.1. La chn cu kin m hnh2. Ti cc tnh cht bn v c xc nh trc3. Nhp chn vo Drawing>Assembly drawing to bn v t hp hoc Drawing>single-part drawing to bn v chi tit.To bn v t hpTheo th d ny chng ta s to bn v t hp cho ct to bn v t hp cho mi cu kin ct:Xa cc bn v t hp ctM danh sch bn v v xa mi bn v t hp vi tiu COLUMN.To cc bn v t hp ct1. La chn b lc ct (column_filter) trn thanh cng c Select switches2. La chn lnh Properties>Assembly drawing.. trong trnh n m hp thai Assembly drawing properties3. La chn tnh cht column trong hp thai s xung nm k nt Load.

12. 4. Nhp chn nt Load v chn OK 13. 5. La chn lnh Drawing>Assembly drawing trong trnh n to bn v t hp.14. 6. M danh sch bn v v kim tra l cc bn v c to chnh xc cha. Bn c th s dng b lc hnh nh trong hp thai View filter (c m t hp thoi View properties) h tr cu kin la chn trong m hnh to bn v.

11.6 iu chnh bn v th cngC th b sung v iu chnh bng tay cc cu kin bn v ph (nh kch thc, ng, vn bn, k hiu, gin v nhn mc) trong bn v Xsteel. Bt c khi no c th, bn nn iu chnh bn v bng cch ch thay i tnh cht bn v. Th d nh, nu bn s dng tnh cht bn v iu chnh bn v, nhng s chnh sa ny tip tc tn ti nu bn v c to ra do thay i m hnh.

By gi chng ta s hiu chnh thanh ging ngang (bracing_H) bng tay bao gm cng mt iu chnh c xc nh cho brace_V (kch thc khang cch bu lng v khung hnh ch nht ca nhn mc.Thm khang cch kch thc bu lng 1. M bn v bracing_H trong danh sch bn v2. Nhp vo biu tng Create Y dimension.

3. Nhp chn cc ng tm ca bu lng c o kch thc.4. Di chuyn con tr ti ch m bn mun ng kch thc xut hin v nhp vo phm gia ca chut.

di chuyn ng kch thc: chn n v r ti v tr mong mun.

B sung kch thc bu lng u kia bng cng mt cch.Thay i khung bao nhn mc1. Nhp p mt trong nhng nhn mc m hp thoi Part mark properties.2. Trn trang General thay i khung nhn mc trn (Frame around mark) thnh hnh ch nht v nhp chn vo hp kim tra ny.

3. La chn tt c cc nhn mc ca cu kin trong bn v4. Nhp chn nt ModifyLc ny tt c cc nhn mc cu kin c khung bao hnh ch nht.5. ng bn v li bng cch nhp chn vo nt Save trong hp thai.

iu chnh bn v ging bracing_H khc1. M bn v ging bracing_H ln 22. Cho kch thc khang cch gia 2 bu lng3. Thay i khung nhn mc thnh hnh ch nht.4.ng bn v li bng cch nhp chn vo nt Save and Freeze trong hp thoi.

Mt ch F xut hin trong danh sch bn v th hin bn v ny ang b ng cng.Ngay lc bn v dm ngang c cng mt iu chnh nhng ging ng. iu khc nhau ch l bn v ging nm ngang c iu chnh bng tay.11.7 Cp nht bn v t hp v chi titBy gi chng ta s iu chnh m hnh ca chng ta bng cch thay i khang cch bu lng trong cc lin kt bn m. Cc thay i trong m hnh s lm thay i mt s tnh cht trong bn v v khng cn cp nht c na. C th m bn v bn s cn chy li trnh nh s v cp nht chng li.By gi chng ta s nghin cu cch cp nht bn v c iu chnh. cp nht cn Kch hot bn v li bng gii ng cng c P, vic cp nht lm xa tt c cc iu chnh bng tay (b sung kch thc, nhp vn bn) Cp nht khi lng trn bn v bng c N. Chuyn c P ln trong mt bn v b ng cng thnh k hiu *. iu ny ch r l hnh nh (cu kin v bu lng) v cc nhn mc ca cu kin cp nht nhng khng cp nht kch thc.Cc thay i trong m hnhThay i khang cch bu lng trong LK bn m 1. La chn tt c cc lin kt trong m hnh.2. Trong trang 4 thanh cng c lin kt, nhp p chut ln biu tng Tube gusset (20).3. Kim tra li Ignore other types trong hp thai lin kt c chn cha.4. trang Tubebolts1, Tubebolts2 v Tubebolts3 iu chnh khong cch ng gia cc bu lng l 80 nhng th hin bn di.

5. Nhp chn nt ModifyLc ny m hnh thay i v mt s bn v b lc hu. m bn v bn cn chy trnh nh s v cp nht chng.Chy trnh nh sLa chn lnh Tolls>Numbering>Modified.Mt khi trnh nh s c thc thi, cc c trong danh sch bn v th hin mi bn v chu nh hng cn c cp nht.Help: Drawing>Getting started with drawings> Drawing status flagsP10.02.200410.02.2004410*287A[AH-1]Bracing_H

FP10.02.200410.02.2004410*287A[AH-2]Bracing_H

Cp nht bn v ging ngBn v ging ng c to ch vi thuc tnh bn v nh trc. Chng s han chnh ngay sau khi cp nht v n gin chng c to ra bi vic s dng thuc tnh bn v ca chnh chng. cp nht bn v:1. Chn bn v bracing_V trong danh sch.2. Nhp chn nt Update3. M li bn v xem chng ph hp cha.

Cp nht bn v ging nm ngang khng b ng cngV bn v khng b ng cng nn vic cp nht gip khi phc hat ng ca bn v nhng xa mi iu chnh bng tay (trong trng hpny kch thc bu lng v nhn mc khung thay i).Khng th dng lnh Undo cp nht bn v.

1. La chn bn v bracing_H khng b ng cng.2. Nhp vo nt Update.3. M bn v nh sau

Bn c th thy kch thc b sung th cng trc y bin mt v nhn mc cu kin khung tr li hnh trn.Vic cp nht bn v b ng cng lm cp nht hnh dngv nhn mc ca cu kin nhng khng cp nht kch thc v iu chnh th cng. Chng ta cn sa cha bt k kch thc no cn cp nht.Vn l tn qu nhiu thi gian cho vic iu chnh bn v do tt nht l nn lun ng cng bn v c iu chnh bng th cng. Nu s iu chnh chnh trong m hnh to ra rc ri i vi bn v bn lun c th to li bn v vi nhng ci t t ng.

Cp nht li bn v ging ngang b ng cng cp nht bn v b ng cng1. Chn bn v bracing_H trong danh sch2. Nhp chn nt Update3. K t P c thay th bng k t *.

4. M bn v vi k t *.

Bn thy rng kch thc bu lng vn cn xut hin nhng khng cn ng na.Vic cp nht bn v b ng cng c th dn ti tnh trong khng hon thin hoc sai lch v kch thc. Bn phi hon thin hoc iu chnh bng tay khi v ng kch thc.

5. La chn ng kch thc v nhp chn vo biu tng Add dimension point.6. Nhp chn vo nhng im cn thit (tm ca bu lng) o kich thc.7. Nhp chn vo biu tng Remove dimension points.8. Nhp chn vo kch thc sai xa chng i.Lc ny kch thc chnh xc.

9. Lu bn v v k hiu c * s b xa.Bn c th la lc cc bn v cp nht vi nt Filter>up-to-date. c bn v cha cp nht lit k cn nhp vo nt Display>Invert v sau l nt Filter>Up-to-dateKh c kh nng m c cc bn v phin bn trc y. Do s tch hp gia bn v v m hnh, mt bn v cha c cp nht khng c php m ra

11.8 Cc bn v v tnhXem thng tin trong Help: System > Getting started with drawings > Working with drawings > Cloning drawings