lesson planning for the semester started wef jan/feb 2018 · 2018-01-31 · april 36 projection of...
TRANSCRIPT
Lesson Planning For the semester started wef JAN/FEB 2018
MONTH CLASS Topic TEST ASSIGNMENT
FEB 1 Basic concept & introduction of EGD
FEB 2
Introduction to projection & types of
projections
FEB 3 Projection of point in different quardents
FEB 4
Projection of point in different quardents
with problems
FEB 5 Problems on projection of point
FEB 6 Problems on projection of point
FEB 7
Introduction to projection of straight lline.
Porjection of line parallel to one or both
reference plane
FEB 8
Introduction to projection of straight lline.
Porjection of line prependicular to one
reference plane
FEB 9
Introduction to projection of straight lline.
Porjection of line inclined to one or both
reference plane. Traces of lines
FEB 10 Problems on projection of Straight lines
FEB 11 Problems on Porjection of Straight lines
FEB 12
Introduction to projection of plane.
Porjection of plane parallel to one or both
reference plane
FEB 13
Porjection of plane inclined to one plane but
prependicular to other plane.
MARCH 14
Porjection of plane parallel to one plane but
prependicular to other plane.
MARCH 15
Porjection of plane inclined to both ref.
plane
MARCH 16 Introduction to Orthographic Projection
MARCH 17 Orthographic drawing of Bolted Joints
MARCH 18 Orthographic drawing of Screwed Thread
MARCH 19 Orthographic drawing of Screwed Joint
MARCH 20
Introduction to free Hand Sketching-
Orthographic views from isometric
projection
MARCH 21
Free hand views of simple machine
components- Brackets
MARCH 22
Free hand views of simple machine
components- Bearing Block
MARCH 23
Free hand views of simple machine
components- Guiding Block
MARCH 24
Free hand views of simple machine
components- Machine Coupling
Name of Teacher with designation - Dr. Vineet Goel
Department - APPLIED SCIENCE
Subject- EGD
MARCH 25 Introduction to projection of Solid
APRIL 26
Projection of Solid & solid revolution with
axis prependicular to the plane
APRIL 27
Projection of Solid - with axis parallel to the
plane
APRIL 28
Projection of Solid - with axis parallel to the
one plane & inclined to another plane
APRIL 29 Introduction to Isometric projection
APRIL 30 Isometric views of Prisms
APRIL 31 Isometric views of Pyramids
APRIL 32 Isometric views of Cylinders
APRIL 33 Projections of sections of prisms
APRIL 34 Projections of sections of pyramids
APRIL 35 True Shape of Section
APRIL 36 Projection of Section of Cylinder & Cones
APRIL 37 Development of Surfaces
Lesson Planning For the semester started wef JAN/FEB 2018
Name of teacher /designation: Dr. Shaifali Goel /assoc. prof.Department Applied Sc. & Humanities
Mathematics-II,MAT-102 L
Month class Topic/chapter covered Test / assignment
Feb L- 1 Rank of a matrix,normal form of a matrix
Feb L- 2 inverse using elementary transformations,
Feb L- 3
linear dependence and independence of vactors ,linear
and orthogonal transformations
Feb L- 4 consistency of linear system of equations
Feb L- 5
eigen values and eigen vectors, properties of eigen
values,
Feb L- 6 Cayley - Hamilton theorem assignment on matrices
Feb L- 7 Exact differential equations.
Feb L- 8 Equations reducible to exact differential equations
Feb L- 9 simple electric circuits
Feb L- 10 Newton's law of cooling, heat flow
Feb L- 11 Orthogonal trajectories
Feb L- 12 Linear differential equations CF,PI
Feb L- 13 complementary function and particular integral
Feb L- 14 Method of variation of parameters to fnd P.I.
March L- 15 Cauchy's and Legender's linear equations,
assignment on linear diff.
equ.
March L- 16
simultaneous linear equations with constant co-
efficients.
March L- 17 Simple pendulum
March L- 18 Oscillatory electric circuits.
March L- 19 Laplace transforms of elementary functions
March L- 20 Transforms of derivaties, integrals
March L- 21 multiplication by tn , division by t
March L- 22 Evaluation of integrals
March L- 23 Inverse transforms
March L- 24 convolution theorem
March L- 25 application to linear differential equations
March L- 26 simultaneous linear differential equations
assignment on laplace
transform
March L- 27 Formation of partial differential equations,
April L- 28 Lag a ge‟s li ea pa tial diffe e tial e uatio
April L- 29 First order non-linear partial differential equation
April L- 30 Cha pit‟s ethod
April L- 31 Method of separation of variables
April L- 32 applications to wave equation
April L- 33 heat equation, two dimensional heat flow assignment on partial
April L- 34 Convergence and divergence of infinite series
April L- 35 D ' Alembert's ratio test
April L- 36 Cauchy root test
April L- 37 Raabe's test,log test
April L- 38 Integral test and Alternating series
April L- 39 Absolute and conditional convergence
assignment on infinite
series
Subject/code
Lesson Planning For the semester started wef JAN/FEB 2018Name of teacher /designation: Dr. Shaifali Goel /assoc. prof.
Department Applied Sc. & Humanities
Mathematics-III
Month class Topic/chapter covered Test / assignment
Feb L- 1
Eule ’s fo ulae, o ditio s fo a Fou ie expansion
Feb L- 2 change of interval,
Feb L- 3 Fourier expansion of odd and even functions,
Feb L- 4 half range sine and cosine series
Feb L- 5 half and full rectified wave
Feb L- 6 Fourier integrals, Fourier transforms,
Feb L- 7 Shifting theorem,Convolution theorem
Feb L- 8 Fourier transforms of derivatives
Feb L- 9 Fourier transforms of integralsFeb L- 10 Fourier transform of Dirac delta function. assignment on fourier
Feb L- 11 Exponential function, Trigonometric
March L- 12 Hyperbolic functions,
March L- 13 Logarithmic functions
March L- 14
Limit and Continuity of a function,
Differentiability and Analyticity
March L- 15
Cauchy-Rieman :necessary and sufficient
conditions for a function to be analytic
March L- 16 polar form of the Cauchy-Riemann equations.
assignment on complex
variable
March L- 17
Integration of complex functions. Cauchy
Theorem
March L- 18 Cauchy- Integral formula.
March L- 19 radius and circle of convergence,
March L- 20 Taylor's Maclaurin's and Laurent's series
March L- 21 Zeroes and singularities of complex functions,
March L- 22 Residues.
April L- 23 Evaluation of real integrals using residues
assignment on comlex
integral
April L- 24 Expected value of a random variable
April L- 25 Binomial, Poisson distributions
April L- 26 Normal distribution
April L- 27 Testing of a hypothesis : large samples
April L- 28 Stude t’s t-dist i utio
April L- 29 Chi-square test of goodness of fit assignment on probability
April L- 30 Linear programming problems formulation,
April L- 31 Simplex method. assignment on LPP
April L- 31 Equation and simple properties of spheres
April L- 32 Equation and simple properties of cones
April L- 33 Equation and simple properties of cylinders. assignment on solid geomatry
Subject:
Lesson Planning For the semester started wef JAN/FEB 2018
subject Workshop tehnology
MONTH CLASS Topic TEST ASSIGNMENT
FEB 1 Overview of basics of manufacturing processes
FEB 2 Study of industrial safety including accident
FEB 3
safety, sources of accident & method of safety and first
aid
FEB 4
Classification, general properties and applications of
engineering materials
FEB 5 Study of mild steel, medium carbon steel
FEB 6 Study of high carbon steel, high speed steel and cast iron
FEB 7Introduction to Plant Layout, Objectives of Layout,
FEB 8
Study of Product Layout,their advantages, disadvantages
& application
FEB 9
Study of Process Layout,their advantages, disadvantages
& application
FEB 10
Study of Combination & Fixed Position Layout ,their
advantages, disadvantages & application
FEB 11
Welding: Introduction to Welding, Classification of
Welding Processes,
FEB 12 Gas Welding: Oxy-Acetylene Welding,
MARCH 13Resistance Welding; Spot and Seam Welding,
MARCH 14
Arc Welding: Metal Arc Welding, their advantages,
disadvantages & application
MARCH 15
TIG Welding, their advantages, disadvantages &
application
MARCH 16 Welding Defects and Remedies,
MARCH 17 Soldering & Brazing.
MARCH 18
Introduction to Casting processes, Basic steps in casting
process
MARCH 19 Study of pattern & their types
MARCH 20 Study of risers, runners & gates
MARCH 21
Study of different types of molding sand & its
preparation
MARCH 22 Core Sand, Core making
MARCH 23 Core Assembly, Mold Assembly
MARCH 24 Melting & pouring, Fettling of casting
MARCH 25 Casting defects & their remedies
MARCH 26 Introduction to cold & hot working processes,
APRIL 27 Study of Shearing, punching processes
APRIL 28 Study of Blanking & piercing processes
APRIL 29
Study of forming, bending and joining process, their
advantages & disadvantages
APRIL 30
Introduction to Hot Working, Principles of Hot Working
Processes,
APRIL 31 Study of Forging, Rolling processes
APRIL 32 Study of Extrusion, Wire Drawing..
Name of Teacher with designation - NISHANT
Department - APPLIED SCIENCE
APRIL 33
Briefing of sheet metal operations,Measuring,Layout &
Marking
APRIL 34
Introduction to Machine Tools: Specifications and Uses
of commonly used Machine Tools in a Workshop
APRIL 35 Study of Lathe,
APRIL 36 Study of Shaper & Planer
APRIL 37 Study of Milling, Drilling & Slotter
APRIL 38
Introduction to Metal Cutting. Nomenclature of a Single
Points Cutting
APRIL 39 Tool and Tool Wear.
APRIL 40
Mechanics of Chips Formations, Type of Chips , Use of
Coolants in machining.
Month Class Topic/Chapter Covered Academic Activity Test/Assisgnment
L-1 D.C. circuits, Ohm's law, Kirchoff's law,
L-2 nodal and loop methods of analysis,
L-3 Star to delta and delta to star transformation
L-4 Thevenin's teorem, Norton's Theorem
L-5Superposition theorem, Maximum power
transfer theorem
L-6 Reciprocity theorem, Tellegen's theorem
L-7 Millimen's theorem.
L-8A.C. circuits, Sinosoidal signal, instantaneous and
peak values,
L-9 RMS and average values, phase angles.
L-10 Polar and rectangular representation,
L-11 exponential and trigonometric representation,
L-12R, L & C components, behaviors of these
components in A.C. circuits.
L-13concept of complex power, power factor,
transient response of RL, RC circuits
L-14 Series A.C. circuits, resonance in A.C. circuits
L-15Parallel A.C. Circuits, resonance, q-factor, cut-off
frequency, bandwidth.
L-16Three- phase electricity generation, Phase and
Line voltages and currents,
L-17 balance star and delta circuits,
L-18 Power equation
L-19Measurement of power by two wattmeter
method
L-20Importance of earthing, Measuring instruments,
L-21 Voltmeter, ammeter
L-22 wattmeter, energy meter
L-23Principle, construction and working of
transformer
L-24 Efficiency and regulation of transformer
L-25D.C. machine constuction and working principle,
L-26introduction and working principle of Induction
motor,
L-27introduction and working principle of
Synchronous machines,
●Assisg e t- , ●Test of u it-I
●Quiz o R, L, & C components behavior in
A.C. and D.C. circuits.
● Po e poi t Presentation on Complex
power and series and
parallel resonance.
●Assisg e t- , ●Test of u it-II
March
●Quiz of U it-III, ●Po e poi t Presentation on "Phasor
of three pahse circuits."
● Nu e i al Sessio of unit- Phase and line
voltages and currents.
●Assisg e t- , ●Test of u it-III
April
Lesson Planning For the semester started wef JAN/FEB 2018
Name of institute OITM, Hisar
Name ofTeacher with Designation Mrs.Neha Gupta, Assistant Professor
Department Electrical Engineering
Semester 2
Subject with Subject Code
●Quiz of U it -IV ●Nu e i al Sessio of unit- transformer.
●Assisg e t- , ●Test of u it-IV.
BEE (EE-101-L)
FEB
●Nu e i al sessio o D.C. circuits.
●Quiz o the o e ed topics,
●Nu e i al Sessio o all the theorems.
Lesson Planning For the semester started wef JAN/FEB 2018
Name of teacher /designMs.Nirmal
Department Applied Sc. & Humanities
Subject/code Essential of communication,HUM-102 L
Month Class Topic /chapter covered Test /assignment
February L-1
Spotting the errors pertaining to nouns,
pronouns
February L-2
Spotting the errors pertaining to adjective
and adverbs; Assignment on
February L-3 Concord - grammatical concord, notional concordParts of speech
February L-4
the principle of proximity between subject
and verb
February L-5 Idioms and phrases;
February L-6
Words often confused; One-Word
Substitutes;
February L-7 Formation of words
February L-8
(suffixes, prefixes and derivatives); Foreign
Words (A selected list) Test of Spotting errer
February L-9
Introduction to principal components of
spoke E glish –
Assignment on word-
stress patterns andweak
forms in english
February L-10 Word -stress patterns
March L-11 Intonation,
March L-12 Weak forms in English
March L-13
Developing listening and speaking skills
through various activities, such as :
March L-14 (a) role play activities,
March L-15 (b) Practising short dialogues
March L-16 (c) Group discussion
March L-17 (d) Debates
March L-18 (e) Speeches
March L-19 (f) Listening
March L-20 to news bulletins
March L-21
(g) Viewing and reviewing T.V. programmes
etc.
March L-22
Developing reading and writing skills through
such tasks/activities as,
Assignment on key
expression and slognan
writing
March L-23 Developing outlines
April L-24 key expressions,
April L-25 situations
April L-26 slogan writing
April L-27 A
April L-28
Reading verbal and non-verbal texts-like
cartoons,
April L-29 Graphs and tabulated data etc
April L-30
(a) Business Letters, Format of Business
letters and Business letter writing Test of letters
April L-31 (b) E-mail writing
April L-32
(c) Reports, Types of Reports and Format of
Formal Reports
April L-33 (d) Press Report Writing Test of report writing
Month Class Topic/Chapter Covered Academic Activity Test/Assisgnment
L-1INTRODUCTION TO SEMICONDUCTOR
ELECTRONICS: Energy Bands in
L-2 Semiconductor Material, classification of
semiconductors,
L-3 Mass action law, effect of temperature
L-4charge densities in a semiconductor, Drift
Current
L-5diffusion current density, total current
density,
L-6 Total Current Density, Conductivity
L-7PN JUNCTION DIODE AND ITS
APPLICATION: PN Junction Theory
L-8Depletion Layer, V-I equation and
characteristics,
L-9 Resistance levels, Piece-wise linear
characteristic and equivalent circuits,
L-10Transition and Diffusion capacitance,
Reverse Recovery time
L-11Modified Mc murray Bedford Half bridge
and full bridge inverter
L-12 Varactor diode, zener diode, LED
L-13Photodiode, Load line analysis of a diode
circuit
L-14Reduction of harmonics, three phase
bridge inverter
L-15Application:Half wave and Full wave
Rectifier, Bridge rectifier,
L-16 Clipper, clamper, Voltage multiplying circuit,
L-17 Zener Voltage regulator
L-18BIPOLAR JUNCTION TRANSISTOR:
Introduction, Physical Structure, and its
L-19Transistor equation, transistor amplifying
action, types of configurtaions
L-20Characteristic curves, comaparision
between three configuration,
L-21 Thermal runaway, and heat sink
L-22Operating point of a transistor,
Requirement of biasing
L-23 Fixed bias, and potential divider bias circuit
L-24MOSFET AND SPECIAL DEVICES: Types of
FETs, Construction
L-25Governing equation and characteristics
curves of FET
L-26 Comparision of BJT, JFET and MOSFET,
L-27MOSFET as an amplifier, introduction to
thermistor
L-28 Optocoupler, SCR
L-29 DIAC, TRIAC, UJT
FEB
● Quiz of U it -I ●Nu e i al Sessio Of U it-I ● Presentation on the topic
"ENERGY BANDS IN
SOLIDS"
●Assisg e t- , ●Test of unit-I
● Quiz of U it -II ●Nu e i al Sessio Of U it-II ● Presentation on the topic
"DIFFERENT TYPES OF
DIODES AND ITS
APPLICATION"
●Assisg e t- , ●Test of unit-II
March
●Quiz of U it -III ●Nu e i al Sessio Of U it-III ● Presentation on the topic
"TRANSISTOR AND
TRANSISTOR BIASINGS"
●Assisg e t- , ●Test of unit-III
April● Quiz of U it -IV ●Nu e i al Sessio Of U it-IV ● Presentation on the topic
"DIFFERENT TYPES OF
SEMICONDUCTOR
DEVICES"
●Assisg e t- , ●Test of unit-IV
Subject with Subject Code BASICS OF ELECTRONICS ENGINEERING (ECE-101-L)
Lesson Planning For the semester started wef JAN/FEB 2018
Name of institute OITM, Hisar
Name ofTeacher with Designation Mrs.Kavita Namdev Shrivastava, Assistant Professor
Department Electrical Engineering
Semester 2
Lesson Planning For the semester started wef JAN/FEB 2018
Department Applied science
ME-II
Month class Topic/chapter covered activity
L- 1 Need,Basic Guidelines and process of value education
L- 2 concept of Integrity, Work Ethics,Service learning
L- 3
concept of Civic Virtue,respect for others,living
peacefully,caring,sharing,honesty,courage,valuing time
L- 4 Cooperation,commitment,Empathy,selfconfidence
L- 5 Character and spirituality,Perception
L- 6 understanding ofEngineering ethics
L- 10 moral issues Quiz
L- 11 Theories:-Kohlberg's,Gilligian
L- 12 Models of Professina lRoles
L- 13 Engineering as social Experiments,case study
L- 14 safety and risk, risk and benefit analysis
L- 15 collegiality and loyalty
L- 16 professionl right & ,employee rights
L- 17 Conflicts of interest
L- 18 occupational crime Quiz
L- 19 Rights of engineer
L- 20 IPR
L- 21 Discrimination
L- 22 Global issues:- MNC
L- 23 Enviroment ethics and computer ethics
L- 24 Engineers as manager,expert,advisors
L- 25 moral leadership
L- 26 sample code of ethics:-ASME,ASCE,IEEE
L- 27 Institution of Engineers,IETE
L- 28 MEDIA ETHICS Quiz
Name of teacher /designation: Ms.Deepika Arora /asst. prof.
Branch / Semester
Feb
March
April
Lesson Planning for the semester started w.e.f …12 FEBRURY 2018
Name of Institute: OM INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Depatment: Applied Science and Humanities(Chemisry)
Month Class Topic/Chapter covered Academic activity
Test/assignment
FEB 1 Thermodynamics: concept of entropy
FEB 2 Free Energy and work functions
FEB 3 Free energy change
FEB 4 Chemical Potential
FEB 5 Gibb’s Helmholtz Equation
FEB 6 Cluadius-Clapeyron equation ASSIGNMENT ON thermodynamics
FEB 7 Phase Equilibrium: Definition of phase
FEB 8 Component and degree of freedom Test: thermodynamics
FEB 9 Gibb’s phase rule
MARCH 10 One component system(H2O System)
MARCH 11 Two component system(Pb-Ag & Zn-Mg)
MARCH 12 Quiz 1
MARCH 13 Water and its treatment: Hardness of water and its determination(EDTA Method)
MARCH 14 Units of Hardness
MARCH 15 Alkalinity of water and its determination
MARCH 16 Scale and sludge formation (methods of prevention)
MARCH 17 Treatment of water for domestic use Ass: Water and its treatment
MARCH 18 Coagulation, sedimentation, filteration and disinfection
MARCH 19 Water softening: ion exchange process
MARCH 20 Desalination(reverse osmosis)
MARCH 21 Corrosion: Dry and wet corrosion ASS: Corrosion
MARCH 22 Electrochemical theory of corrosion: Galvanic corrosion
MARCH 23 Differential aeration corrosion
MARCH 25 Factors affecting corrosion, preventive measures (cathodic protection, protective coatings)
APRIL 26 Batterries: characteristics of batterries
APRIL 27 Primary and secondary batteries, Lead storage and litium batterries
APRIL 28 Lubricants: introduction ,classification and properties
APRIL 29 Polymers: monomers and polymers ,polymerization, types of polymerization
Quiz 2
APRIL 30 Effect of structure on properties of polymers, prepration
APRIL 31 Application of thermoplastics(PVC), thermoset (PF)and Elastomers(SBR)
APRIL 32 Analytical methods: principle and application of Thermogravimetric analysis
Ass: Polymers
APRIL 33 Differential thermal analysis
APRIL 34 Special analysis: Electromagnetic radiations
APRIL 35 Lambert’s –Beer’s Law
APRIL 36 Priniple and applications of UV-VIS and IR specrtoscopy
ASS: Analytical methods
Lesson Planning for the semester started w.e.f …12 FEBRURY 2018
Name of Institute: OM INSTITUTE OF TECHNOLOGY AND MANAGEMENT
Depatment: Applied Science and Humanities(Physics)
Month Class Topic/Chapter covered Academic activity
Test/assignment
FEB 1 Types of Atomic Bonding, Space lattice, Unit cell
FEB 2 Types of Unit Cell and Translational vectors, Miller indices
FEB 3 Crystal structures, Point defects in solids
FEB 4 X-ray diffraction and Bragg’s law
FEB 5 Laue Method and Powder method ASSIGNMENT ON crystallography
FEB 6 Failures of classical physics and Introduction to quantum mechanics(simple concepts)
FEB 7 Discovery of Planck’s constant and de-Broglie hypothesis, Group velocity and Phase velocity.
FEB 8 Test: Crystallography
FEB 9 Introduction to Operators, Schrodinger’s time dependent wave equation
MARCH 10 Schrodinger’s time independent wave equation, Heisenberg Uncertainty principle
MARCH 11 Applications of Heisenberg’s uncertainty Principle Assignment: Quantum mechanics
MARCH 12 Quiz 1
MARCH 13 Classical free electron theory and its limitations
MARCH 14 Drude’s theory of Conduction
MARCH 15 Quantum theory of electrones
MARCH 16 Fermi levels and Fermi energy, Fermi Distribution function
MARCH 17 Thermionic emission, Richardson’s equations Ass :Free electron theory
MARCH 18 Introduction to magnetic properties of solids, Atomic magnetic moments
MARCH 19 Classical theory of Diamagnetism and Hysteresis
MARCH 20 Classical theory of Paramagnetism
MARCH 21 Ferromagnetism(domain theory) and anti-ferromagnetism
ASS: magnetic properties of solids
MARCH 22 Dielectrics- molecular theory Test: free electron theory
MARCH 23 Polarisation , susceptibility ,dielectric coefficient, permittivity and various relation between these,
Gauss law in presence of dielectric and energy stored in a dielectric
MARCH 25 Behavior of dielectrics in a.c. filed, dielectric losses ASS: Dielectrics
APRIL 26 Origin of energy bands, Kronig penny model(qualitative), E-K diagrams (Brillouin zones)
APRIL 27 Concept of effective mass of electrones and holes ,Fermi energy and its variation with tempt
APRIL 28 Hall effect and its applications Test :dielectrics
APRIL 29 Photoconductivity and its applications Assignment :Band theory of solids
APRIL 30 Introduction to superconductivity, meissner effect, curie’s temperature, critical field, London equation
APRIL 31 Type1 and type 2 superconductors , formation of superconducting gap at Fermi level
APRIL 32 BCS theory Ass: superconductivity
APRIL 33 Introduction to nanotechnology Test: Band theory of solids
APRIL 34 Properties of nanomaterials, bucky ball, carbon nano- tube
Quiz 2
APRIL 35 Basics of synthesis , Top-down, Bottom up Approach, Ball milling
Ass: Nanotechnology