lenntech · pdf filethe ped applies to the design, ... cold and hot water, sea water, alkaline...
TRANSCRIPT
• Carbon steel & stainless steel ball valves ------------- pages 10 to 17• Cast iron ball valves --------------------------------------------------------------------------------------------------page 18• PVC ball valves ----------------------------------------------------------------------------------------------------------------- page 18• Brass ball valves -------------------------------------------------------------------------------------------------------------page 18• Butterfly valves ----------------------------------------------------------------------------------------- pages 19 to 23• Needle valves ----------------------------------------------------------------------------------------------------------------------page 23• Floating ball valves ----------------------------------------------------------------------------------------------------- page 24• Gate valve -------------------------------------------------------------------------------------------------------------------------------page 24
• Globe valves --------------------------------------------------------------------------------------------------- pages 24 to 25• Forged valves ------------------------------------------------------------------------------------------------pages 26 to 27• Y-strainers ------------------------------------------------------------------------------------------------------------------------------- page 28• Check valves --------------------------------------------------------------------------------------------------- pages 29 to 32• Expansion joints ----------------------------------------------------------------------------------------- pages 32 to 33• Knife gate valves ------------------------------------------------------------------------------------- pages 34 to 36• Connections ------------------------------------------------------------------------------------------------------- pages 37 to 38
Valves for industry, HVAC & water works
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
4
Technical manual
1 - Scope The PED applies to the design, manufacture and conformity assessment of pressure equipment and assemblies with a maximum allowable pressure (PS) greater than 0,5 bar such as: vessels, pressurised storage containers, heat exchangers, steam generators, boilers, industrial pipes,safety devices, pressure accessories, valves and fittings.
Equipment excluded from the PED:- Equipment with PS < 0,5 bar- Valves and fittings < DN32 (CE marking prohibited)
2 - Fluid groupsFluids means gases, liquids and vapours in pure phase as well as mixtures thereof. Fluids may contain a suspension of solids.
3 - Risk categoriesRisk category IV only applies for safety devices.
Pressure ratingStandard Temp. Pressure
20°C PN20 PN50 PN64 - PN100 PN150 - PN250 PN420ISO
20°C 20 bar 50 bar 64 bar 69 bar 100 bar 138 bar 150 bar 207 bar 250 bar 420 barMax. admissible pressure
454°C 300 lbs - 400 lbs 600 lbs - 900 lbs - 1500 lbs 2500 lbsANSI B 16.34
454°C - - - - - 800 lbs - - - -API 602 (forged)
16°C - - - API 1000 API 1500 API 2000 - API 3000 - API 6000API 6A / CWP (Cold Water Pressure)
16°C - - - 1000 psi 1500 psi 2000 psi - 3000 psi - 6000 psiWOG (Water Oil Gas)
150 lbs(300°C)
DN: Nominal size PS: Maximum allowable pressure TS: Maximum/minimum allowable temperature
Group 1 - Dangerous fluids Group 2 - Non dangerous fluids
explosive, extremely flammable, highly flammable, flammable (max. allowable temp. above flashpoint), very toxic, toxic, oxidizing.
other fluids not reffered in group 1
Liquidsexample: fuel
Gasesexample: natural gas
Liquidsexample: water
Gasesexample: saturated steam
3/1 - Dangerous gases (group 1), example: natural gas 3/2 - Other gases (group 2), example: air15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500Class
2,56
1016
25
40
63100
150
300
6001500
2500
A3 § 3
Category I Category II
Category II
Category III
A3 § 3
15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400Class
2,5
6
1016
25
40
63
100
150
300
60015002500
Category I
Category II Category III
A3 § 3
3/3 - Dangerous liquids (group 1), example : fuel15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500Class
2,5
6
1016
2540
63100
150
300
60015002500
A3 § 3Category I
Category II
Category III
A3 § 3
> 500 bar
3/4 - Other liquids (group 2), example: water15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500Class
150
300
600
1500
2500
A3 § 3
Category I
Category II
A3 § 3
> 500 bar
2,56
1016
2540
63100
DNPN
DNPN
DNPN
DNPN
CE-PED - Pressure Equipment Directive (97/23/EC)
5
Materials (EN 1503)
Working conditions for elastomeres
EPDM
NBR
Hypalon
FKM (Viton®)
Natural rubber
Silicone
Food silicone
Elastomere
-10°C/+110°C
-10°C/+80°C
-10°C/+80°C
-5°C/+180°C
-10°C/+60°C
-30°C/+150°C
-30°C/+150°C
Min. / Max. temperature
Cold and hot water, sea water, alkaline products, sodium hydroxide.
Non aromatic hydrocarbons, natural gas, greases, oil, compressed air, glycol, water.
Mineral acids, oxydizing fluids.
Acids, greases, hydrocarbons, petrol, fuel, oil, gases.
Spirit, acetone, food, abrasive powders.
High temperature, air or inert gases.
Food.
Use
Hydrocarbons, steam, gases, acids, oil, freon.
Atmospheric environment, petrol, solvents.
Acetic-based and acetone-based environment.
Steam and hot water (max. 130°C), freon, alkaline products.
Acids and hydrocarbons.
Steam and hot water (max. 100°C), solvents.
Other applications.
Not recommended
Carbon steel Forged carbon steel (EN 10222-2)
Cast steel (EN 10213-2)
NF A 36-607 DIN 17-440 WN° ASTM Min. temp. Max. temp.
AF Z6 CN18-09AF Z2 CN18-10AF Z6 CND17-11AF Z2 CND17-12
X5 CrNi 18-10X2 CrNi 19-11X5 CrNiMo 17-12-2X2 CrNiMo 17-12-2
1.43011.43061.44011.4404
A 182 F 304A 182 F 304 LA 182 F 316
A 182 F 316 L
-196°C-196°C-196°C-196°C
+815°C+425°C+815°C+455°C
A48 AP P 245 N C22.8 1.0460 A 105A 350 LF2
-20°C-46°C
+425°C+350°C
NF EN 10213-2 DIN WN° ASTM Min. temp. Max. temp.
A48 CM GP 240 GH GSC-25 1.06191.1156
A 216 WCBA 352 LCB
-25°C-45°C
+425°C+345°C
Stainless steelForged stainless steel (EN 10222-5)
NF A DIN 17-445 WN° ASTM Min. temp. Max. temp.
Z6 CN 18.10 N
Z6 CND18.12N
GX6 CrNi 18-9GX2 CrNi 19-11GX6 CrNiMo 19-11-2GX2 CrNiMo 19-11-2
1.43081.43091.44081.4409
A 351 CF8A 351 CF3
A 351 CF8MA 351 CF3M
-196°C-196°C-196°C-196°C
+815°C+425°C+815°C+455°C
Cast stainless steel (EN 10213-4)
NF A 32-101 EN 1561 DIN 1691 WN° ASTM Min. temp. Max. temp.
FGL 250 EN-GJL 250 GG 25 EN-JL-1040 A 48 class 358 -10°C +200°C
Cast iron (EN 1503-3)Cast iron
NF A 32-201 EN 1563 DIN 1693 WN° ASTM Min. temp. Max. temp.
FGS 500-7FGS 400-15FGS 400-18
EN-GJS-500-7EN-GJS-400-15EN-GJS-400-18
GGG 50GGG 40GGG-40.3
EN-JS1050EN-JS1030
0.7043
A 536 Gr 60-40-18A 536 Gr 65-45-12A 536 Gr 60-40-18
-15°C-15°C-20°C
+350°C+350°C+350°C
Ductile iron
Brass (EN 1503-4 / EN 12165)
EN 12420 DIN WN° ASTM Min. temp. Max. temp.
CW 617NCW 614N
Cu Zn40Pb2Cu Zn39Pb3
2.04022.0372
B 124 C37700B 124 C38500
-10°C-10°C
+200°C+200°C
EN 1982 DIN WN° ASTM Min. temp. Max. temp.
CC 491KCB 491K
CuSn5Zn5Pb5-CCuSn5Zn5Pb5-B
2.10962.1097
B62 C83600B30 C83600
-10°C-10°C
+260°C+260°C
Bronze (EN 1503-4)
General information: please check on data sheets for appropriate restrictions.
NF A 36-605 EN 10222 DIN 2528 WN° ASTM Min. temp. Max. temp.
6
Flanges dimensions (EN 1092-1 & ANSI B16.5)
Face to face (EN 558-1 & EN 558-2)
130
210
115
-
90
105
108
150
230
120
-
95
115
117
160
230
125
120
100
115
127
180
260
130
140
105
130
140
200
260
140
240
115
130
165
230
300
150
250
125
150
178
290
340
170
270
145
170
190
310
380
180
280
155
190
203
350
430
190
300
175
215
229
400
500
200
325
200
250
254
480
550
210
350
225
275
267
600
650
230
400
275
325
292
730
775
250
450
325
-
330
850
900
270
500
375
-
356
980
1025
290
550
425
-
381
1100
1150
310
600
475
-
406
1200
1275
330
650
500
-
432
1250
1400
350
700
-
-
457
1450
1600
390
800
-
-
508
15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
DIN 3202 / F1DIN 3202 / F2DIN 3202 / F4DIN 3202 / F5DIN 3202 / F32DIN 3202 / F33ANSI B16.10 *
Dimensions in mm
K
L
D
ISO PN40 ISO PN20 - ANSI 150 ISO PN50 - ANSI 300
101520253240506580
100125150200250300350400450500600700800900
1000
ISO PN6 ISO PN10 ISO PN16 ISO PN25
Dimensions in mm
Dimensions in mm
90
95
105
115
140
150
165
60
65
75
85
100
110
125
14
14
14
14
19
19
19
4
4
4
4
4
4
4
M 12
M 12
M 12
M 12
M 16
M 16
M 16
185
200
220
250
285
340
405
460
520
580
640
715
840
910
1026
1125
1255
145
160
180
210
240
295
355
410
470
525
585
650
770
840
950
1050
1170
19
19
19
19
23
23
28
28
28
31
31
34
37
37
40
40
43
4
8
8
8
8
12
12
12
16
16
20
20
20
24
24
28
28
M 16
M 16
M 16
M 16
M 20
M 20
M 24
M 24
M 24
M 27
M 27
M 30
M 33
M 33
M 36
M 36
M 39
90
95
105
115
140
150
165
185
200
60
65
75
85
100
110
125
145
160
14
14
14
14
19
19
19
19
19
4
4
4
4
4
4
4
8
8
M 12
M 12
M 12
M 12
M 16
M 16
M 16
M 16
M 16
235
270
300
360
425
485
555
620
670
730
845
960
1085
1185
1320
190
220
250
310
370
430
490
550
600
660
770
875
990
1090
1210
23
28
28
28
31
31
34
37
37
37
40
43
49
49
56
8
8
8
12
12
16
16
16
20
20
20
24
24
28
28
M 20
M 24
M 24
M 24
M 27
M 27
M 30
M 33
M 33
M 33
M 36
M 39
M 45
M 45
M 52
75
80
90
100
120
130
140
160
190
210
240
265
320
375
440
490
540
595
645
755
860
975
1075
1175
50
55
65
75
90
100
110
130
150
170
200
225
280
335
395
445
495
550
600
705
810
920
1020
1120
11
11
11
11
14
14
14
14
19
19
19
19
19
19
23
23
23
23
23
28
28
31
31
31
4
4
4
4
4
4
4
4
4
4
8
8
8
12
12
12
16
16
20
20
24
24
24
28
M 10
M 10
M 10
M 10
M 12
M 12
M 12
M 12
M 16
M 16
M 16
M 16
M 16
M 16
M 20
M 20
M 20
M 20
M 20
M 24
M 24
M 27
M 27
M 27
90
95
105
115
140
150
165
60
65
75
85
100
110
125
14
14
14
14
19
19
19
4
4
4
4
4
4
4
M 12
M 12
M 12
M 12
M 16
M 16
M 16
340
395
445
505
565
615
670
780
895
1015
1115
1230
295
350
400
460
515
565
620
725
840
950
1050
1160
23
23
23
23
28
28
28
31
31
34
34
37
8
12
12
16
16
20
20
20
24
24
28
28
M 20
M 20
M 20
M 20
M 24
M 24
M 24
M 27
M 27
M 30
M 30
M 33
185
200
220
250
285
145
160
180
210
240
19
19
19
19
23
4
8
8
8
8
M 16
M 16
M 16
M 16
M 20
Union sizes
D K L NumberD K L Number D K L Number
ScrewsUnion sizes Screws Union sizes Screws
101520253240506580
100125150200250300350400450500600
DN(mm)
95,3
117,4
124,0
133,0
156,0
165,0
190,0
210,0
254,0
279,0
318,0
381,0
444,0
521,0
584,0
648,0
711,0
775,0
914,0
66,5
88,6
88,9
98,4
114,3
127,0
149,2
168,3
200,0
235,0
269,9
330,2
387,4
450,8
514,4
571,5
628,6
685,8
812,8
15,8
19,0
19,0
19,0
22,2
22,2
22,2
22,2
22,2
22,2
22,2
25,4
28,5
31,8
31,8
35,0
35,0
35,0
41,1
4
4
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
M 14
M 16
M 16
M 16
M 20
M 20
M 20
M 20
M 20
M 20
M 20
M 24
M 27
M 30
M 30
M 33
M 33
M 33
M 39
88,9
98,6
108,0
117,0
127,0
152,0
178,0
190,0
229,0
254,0
279,0
343,0
406,0
483,0
533,0
597,0
635,0
698,0
813,0
60,5
69,9
79,4
88,9
98,4
120,4
139,7
152,4
190,5
215,9
241,3
298,4
362,0
431,8
476,2
539,8
577,8
635,0
749,3
15,8
15,8
15,8
15,8
15,8
19,0
19,0
19,0
19,0
22,2
22,2
22,2
25,4
25,4
28,5
28,5
31,8
31,8
35,0
4
4
4
4
4
4
4
4
8
8
8
8
12
12
12
16
16
20
20
M 14
M 14
M 14
M 14
M 14
M 16
M 16
M 16
M 16
M 20
M 20
M 20
M 24
M 24
M 27
M 27
M 30
M 30
M 33
90
95
105
115
140
150
165
185
200
235
270
300
375
450
515
580
660
755
890
60
65
75
85
100
110
125
145
160
190
220
250
320
385
450
510
585
670
795
14
14
14
14
19
19
19
19
19
23
28
28
31
31
34
37
40
43
49
4
4
4
4
4
4
4
8
8
8
8
8
12
12
16
16
16
20
20
M 12
M 12
M 12
M 12
M 16
M 16
M 16
M 16
M 16
M 20
M 24
M 24
M 27
M 30
M 30
M 33
M 36
M 39
M 45
Union sizes
D K L NumberD K L Number D K L Number
ScrewsUnion sizes Screws Union sizes Screws Union sizes
D K L Number
ScrewsDN(mm) Ø Ø Ø Ø
Ø Ø Ø
* ball & gate valves
• Carbon steel & stainless steel ball valves1 piece - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 102 pieces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pages 10 to 112 pieces - 800 lbs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 113 pieces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 123 pieces - ISO pad - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 123 pieces - ISO pad - Fire Safe - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 133 pieces flanged - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 133 pieces flanged - ISO pad - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 13Wafer - ISO pad - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 14Split body - Standard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 14Split body - Reference + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 153 ways - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 16ADLER range - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 17
• Cast iron ball valves - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 18
• Pvc ball valves - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 18
• Brass ball valves - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 18
• Butterfly valvesStandard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pages 19 to 20Reference + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pages 20 to 22Double eccentric construction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 23
• Needle valves - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 23
• Floating ball valves - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 24
• Gate valveThreaded - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 24Flanged - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 24
• Globe valvesThreaded - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 24Flanged - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 25
• Forged valvesCarbon steel - 800 lbs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - pages 26 to 27Stainless steel 316 - 800 lbs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 27
• Y-strainersThreaded - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 28Flanged - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 28
• Check valvesStainless steel - All positions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 29Vertical lift - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 29Swing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 30Wafer swing - Single plate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 30Wafer swing - Dual plate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 30Cast iron - Spring - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 31Cast iron & ductile iron - Ball - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 31Strainer baskets - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 32
• Expansion jointsMetal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 32Rubber - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 33Rubber-metal pipe connector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 33
• Knife gate valvesManually operated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 34ISO pad connected - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 35Electric actuated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 35Pneumatic actuated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 36
• ConnectionsFlanges - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 37Repair clamps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 38Tapping bridges - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 38
Valves for industry,HVAC & water works
Valves for HVAC
Carbon steel ball valves,page 12
Check valves, page 30
Cast iron ball valves,page 18
Check valves, pages 30 to 31
Expansion joints, page 33
Brass valves & fittings, pages 180, 182, 186 & 187
Butterfly valves, pages 19 to 23
Gate valve,page 24
Globe valves,page 25
Y-strainers, page 28
Y-strainers,page 28
Valves for water works
Knife gate valves,pages 34 to 36
Butterfly valves, pages 19 to 23
Gate valve,page 24
Butterfly valves, pages 19 to 23
Forged valves, pages 26 to 27
Expansion joints, page 32Check valves, pages 29 to 30
Y-strainers, page 28
Globe valves, page 25
Carbon steel & stainless steel ball valves, pages 10 to 17
Knife gate valves,pages 34 to 36
PVC ball valves,page 18
Valves for industry
1 piece
10
Carbon steel & stainless steel ball valves
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
708002
5,14 708003
7,26 708004
8,03 708005
11,46 708006
17,37 708007
27,38 708008
35,04 708009
60,18
708 - Stainless steelCF8M-1.4408 body - 316 ball.
97/23/CE directive N° 0035 - Risk category II - PTFE seats - Reduced bore - Locking device -800 lbs WOG - Max. pressure 40 bar - Max. temperature 180°C.
705 - Carbon steel A216WCB body - 316 ball.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"
706002
706102
11,74
706003
706103
13,21
706004
706104
13,20
706005
706105
14,79
706006
706106
22,38
706007
-
34,43
706008
-
52,94
706009
-
85,33
706010
-
177,49
706011
-
257,63
9830380
1,02 9830380
1,02 9830381
1,02 9830381
1,02 9830382
1,42 9830382
1,42 9830383
1,60 9830383
1,60 9830384
1,70 9830384
1,70
706 - Stainless steel - Red handleCF8M-1.4408 body - 316 ball.
733 - Stainless steel - ISO padCF8M-1.4408 body - 316 ball.
Concerned by article 3 § 3 from 97/23/CE directive - Chrome plated carbon steel ball - POM/PTFE ball seats;NBR other seats - Reduced bore - Max. temperature 100°C.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4
799002
21,94 799003
23,14 799004
25,76 799005
49,42 799006
59,34 799007
60,96
500 500 500 315 315 315Max. pressure (bar)
799 - Galvanized carbon steel A105
2 pieces97/23/CE directive N° 0036 - Risk category II - PTFE seats - Full bore (except: 789 & 709 reduced bore) - Locking device - 1000 lbs - Max. pressure 63 bar - Max. temperature 180°C.
63 63 63 63 50 50 40 40 25 25Max. pressure (bar)
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"
715 - Stainless steel - Blue handleCF8M-1.4408 body - 316 ball.
63 63 63 63 50 50 40 40 25 25Max. pressure (bar)
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"
705002
9,57 705003
9,58 705004
9,86 705005
11,82 705006
17,88 705007
25,95 705008
39,68 705009
60,93 705010
127,43 705011
183,49
63 63 63 63 50 50 40 40 25 25Max. pressure (bar)
Highpressure
lever code
butterfly handle codeprice €
*blue sleeve code
price €
code
price €
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
733002
20,86 733003
21,90 733004
21,90 733005
21,90 733006
33,55 733007
50,34 733008
80,47 733009
122,71
63 63 63 63 50 50 40 40Max. pressure (bar)
code
price €
code 715002
9,63 715003
9,63 715004
10,50 715005
14,01 715006
21,45 715007
31,52 715008
44,21 715009
75,26 715010
143,98 715011
223,20 9830370
1,02 9830370
1,02 9830370
1,02 9830371
1,42 9830371
1,42 9830372
1,60 9830372
1,60 9830373
1,60 9830374
1,70 9830374
1,70
price €*red sleeve code
price €
3.1
10 €/DN
* sleeve only; sent not mounted.
* sleeve only; sent not mounted; also usable for 705/704/789/709.
3.110 €/DN
Please consult for availability
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
11
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
704002
12,71 704003
14,31 704004
14,30 704005
16,03 704006
24,24 704007
37,30 704008
57,36 704009
92,44
704 - Stainless steel - NPT threaded CF8M-1.4408 body - 316 ball.
code
price €
code
price €
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
789002
19,34 789003
19,43 789004
19,44 789005
21,18 789006
32,08 789007
49,83 789008
70,29 789009
115,81
789 - Stainless steel - Male-FemaleCF8M-1.4408 body & ball.
Ø 3/8" 1/2" 3/4" 1"
709003
13,60 709004
13,60 709005
18,18 709006
26,96
709 - Stainless steel - Male-MaleCF8M-1.4408 body & ball.
Ø 1/4" 3/8" 1/2" & 3/4" 1"
9831131
3,40 9831132
3,40 9831133
4,05 9831134
6,20
9831 - Butterfly handle for 705/706/704/789/709
63 63 63 63 50 50 40 40Max. pressure (bar)
2 pieces - 800 lbs97/23/CE directive N° 0948 - Full bore - 800 lbs - Max. pressure 138 bar - PTFE + carbon graphite seat - Anti blow-outstem - Antistatic system - Fire safe BS 6755.
code
price €
63 63 63 63 50 50 40 40Max. pressure (bar)
63 63 63 50Max. pressure (bar)
BSP code
NPT code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
717002
717102
56,37
717003
717103
62,60
717004
717104
81,57
717005
717105
83,50
717006
717106
138,90
717007
717107
161,97
717008
717108
271,00
717009
717109
272,00
717 - Carbon steel - BSP & NPT threadedA105 carbon steel body - 316 stainless steel ball - Temperature range: -20°C/+180°C.
718 - Carbon steel - Butt welding ends schedule 80A105 carbon steel body - 316 stainless steel ball - Length: 100 mm - Temperature range: -20°C/+180°C.
716 - Stainless steel - BSP & NPT threaded316 stainless steel body & ball - Temperature range: -30°C/+180°C.
10 10 15 20 25 30 38 48Bore
BSP code
NPT code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
716002
716102
118,37
716003
716103
134,17
716004
716104
136,00
716005
716105
193,47
716006
716106
268,50
716007
716107
406,07
716008
716108
565,90
716009
716109
844,50
10 10 15 20 25 30 38 48Bore
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
718008
79,20 718010
79,20 718015
89,97 718020
110,40 718025
154,83 718032
178,67 718040
269,27 718050
337,33
10 10 15 20 25 30 38 48Bore
719 - Carbon steel - Butt welding ends schedule 80316 stainless steel body & ball - Length: 100 mm - Temperature range: -30°C/+180°C.
code
price €
Ø
719008
167,20 719010
167,20 719015
225,87 719020
308,00 719025
453,30 719032
613,07 719040
809,60 719050
1 126,40
10 10 15 20 25 30 38 48Bore
3.1
10 €/DN FIRE SAFE
1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
12
3 pieces - ISO pad97/23/CE directive N° 0038 - Risk category III - Stainless steel reinforced PTFE seats - Full bore - ISO direct mounting pad - Locking device - Max. pressure 63 bar - Max. temperature 200°C.
739 code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
737002 737003 737004 737005 737006 737007 737008 737009 737010 737011 737012737 code
738008 738010 738015 738020 738025 738032 738040 738050 738065 738080 738100738 code
739008
47,80 739010
47,80 739015
47,80 739020
54,00 739025
68,00 739032
92,40 739040
127,60 739050
191,40 739065
335,40 739080
446,00 739100
819,06
737 - Carbon steel - BSP threaded 738 - Carbon steel - Butt welding 739 - Carbon steel - Socket weldingA216WCB body - CF8M-1.4408 ball.
749 code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
747002 747003 747004 747005 747006 747007 747008 747009 747010 747011 747012747 code
748008 748010 748015 748020 748025 748032 748040 748050 748065 748080 748100748 code
749008
51,36 749010
52,00 749015
54,00 749020
58,00 749025
77,20 749032
99,80 749040
136,00 749050
212,24 749065
415,06 749080
643,04 749100
1 008,90
747 - Stainless steel - BSP threaded 748 - Stainless steel - Butt welding 749 - Stainless steel - Socket weldingCF8M-1.4408 body & ball.
Carbon steel & stainless steel ball valves (continued)
798 code
price €
792 code
price €
744 code
price €
code
price €
3 pieces97/23/CE directive N° 0035 - Risk category II - PTFE seats - Full bore - Locking device - Max. pressure 63 bar -Temperature range: -20°C/+180°C.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
796002 796003 796004 796005 796006 796007 796008 796009 796010 796011 796012796 code
797008 797010 797015 797020 797025 797032 797040 797050 797065 797080 797100797 code
798008
13,10 798010
13,10 798015
15,50 798020
20,90 798025
26,70 798032
44,00 798040
56,50 798050
81,60 798065
164,00 798080
236,00 798100
489,00
796 - Carbon steel - BSP threaded 797 - Carbon steel - Butt welding 798 - Carbon steel - Socket weldingA216WCB body - 304 ball.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
790002 790003 790004 790005 790006 790007 790008 790009 790010 790011 790012790 code
791008 791010 791015 791020 791025 791032 791040 791050 791065 791080 791100791 code
792008
15,44 792010
15,44 792015
19,03 792020
24,40 792025
35,54 792032
50,61 792040
75,73 792050
118,41 792065
240,41 792080
366,00 792100
681,76
744002
16,94 744003
18,18 744004
21,14 744005
29,66 744006
39,74 744007
70,56 744008
77,22 744009
138,00 - - -
790 - Stainless steel - BSP threaded 791 - Stainless steel - Butt welding 792 - Stainless steel - Socket welding744 - Stainless steel - NPT threadedCF8M-1.4408 body - 316 ball.
Stem extension for 796/797/798/790/791/792/744Ø 1/4"-3/8" 1/2"-3/4" 1"-1"1/4 1"1/2-2"
9810601
16,60 9810602
21,20 9810603
24,40 9810604
33,80
125,50 125,50 125,50 127,50Height 9830444 9830445 9830446 9830447 9830448*code
**code
price €
Blue sleeveØ 1/4"-3/4" 1"-1"1/4 1"1/2-2" 2"1/2-3" 4"
9830432
1,02 9830433
1,02 9830434
1,42 9830435
1,60 9830436
1,70
3.1
10 €/DN 3 €/pc
* for 796/797/798/790/791/792/744; sent not mounted.** for 737/738/739/747/748/749; sent not mounted.
3.1
10 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
13
NPT code
price €
3 pieces - ISO pad - Fire Safe97/23/CE directive N° 0038 - Risk category III - H module - EN 12516-1 - PTFE seats - ANSI B16-34 - 600 lbs class -Full bore - ISO pad - Locking device - API 607 firesafe - Antistatic system - Temperature range: -20°C/+218°C in car-bon steel, -30°C/+218°C in stainless steel - Max. pressure 140 bar up to 3/4", 125 bar for 1", 100 bar above.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
702002 702003 702004 702005 702006 702007 702008 702009BSP code
702108 702110 702115 702120 702125 702132 702140 702150BW code
702208 702210 702215 702220 702225 702232 702240 702250SW code
702302
71,63 702303
71,63 702304
77,20 702305
94,27 702306
124,92 702307
168,30 702308
223,17 702309
461,76
702 - Carbon steel - BSP threaded, Butt welding, Socket welding & NPT threadedA216WCB body - CF8M-1.4408 ball.
NPT code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
703002 703003 703004 703005 703006 703007 703008 703009BSP code
703108 703110 703115 703120 703125 703132 703140 703150BW code
703208 703210 703215 703220 703225 703232 703240 703250SW code
703302
82,40 703303
82,40 703304
88,88 703305
108,63 703306
143,98 703307
194,27 703308
257,24 703309
576,43
703 - Stainless steel - BSP threaded, Butt welding, Socket welding, NPT threadedCF8M-1.4408 body & ball.
3 pieces flanged
Valve & limit switch on request
DN 15 20 25 32 40 50 65 80 100
710015
112,27 710020
124,03 710025
152,60 710032
216,77 710040
244,43 710050
381,97 710065
672,07 710080
827,57 710100
1 146,57
130 150 160 180 200 230 290 310 350Face to face
710 - Carbon steel A216WCB body - CF8M-1.4408 ball.
DN 15 20 25 32 40 50 65 80 100
711015
126,37 711020
156,13 711025
168,13 711032
245,47 711040
339,57 711050
451,50 711065
748,77 711080
1 027,53 711100
1 431,30
Face to face 130 150 160 180 200 230 290 310 350
711 - Stainless steelCF8M-1.4408 body & ball.
3 pieces flanged - ISO pad97/23/CE directive N° 0035 - Risk category II - Flanged PN40 - PTFE-stainless steel seats - Full bore - ISO mounting pad - NF 29355 - DIN 3202 F1 - Locking device - Max. pressure 40 bar - Max. temperature 200°C.
97/23/CE directive N° 0036 - Risk category II - Flanged PN40 - PTFE seats - Full bore - DIN 3202 F1 - Lockingdevice - Max. pressure 40 bar - Max. temperature 180°C.
code
price €
code
price €
code
price €
code
price €
DN 15 20 25 32 40 50 65 80 100
730015
39,06 730020
70,14 730025
72,86 730032
114,76 730040
134,18 730050
178,66 730065
322,88 730080
419,42 730100
715,24
130 150 160 180 200 230 290 310 350Face to face
730 - Carbon steel A216WCB body - 304 ball.
DN 15 20 25 32 40 50 65 80 100
731015
59,44 731020
92,07 731025
95,65 731032
150,64 731040
176,13 731050
257,93 731065
423,79 731080
596,34 731100
938,75
130 150 160 180 200 230 290 310 350Face to face
731 - Stainless steel CF8M-1.4408 body & ball.
3.1
10 €/DN 3 €/pc
3.1
10 €/DN
FIRE SAFE
3.1
10 €/DN 3 €/pc
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
14
Split body - Standard97/23/CE directive N° 0035 - Risk category II - PTFE seats - Full bore - ISO 5211 mounting pad - Locking device - Max. pressure 16 bar - Max. temperature 150°C.
code
price €
code
price €
code
price €
code
price €
DN 15 20 25 32 40 50 65 80 100 125 150 200
762015
71,57 762020
86,54 762025
113,29 762032
148,80 762040
192,21 762050
249,15 762065
369,23 762080
455,69 762100
620,43 762125
1 197,42 762150
1 556,06 762200
2 821,40
115 120 125 130 140 150 170 180 190 325 350 400Face to face
762 - Carbon steelA216WCB body - CF8-1.4308 ball - DIN 3202 F4/F5.
DN 15 20 25 32 40 50 65 80 100
778015
73,06 778020
82,08 778025
109,79 778032
138,48 778040
198,73 778050
277,28 778065
462,98 778080
563,75 778100
883,08
108 117 127 140 165 178 190 203 229Face to face
778 - Carbon steelA216WCB body - CF8-1.4308 ball - ASME B16.10 - Antistatic system.
Flanged PN16
DN 15 20 25 32 40 50 65 80 100 125 150 200
763015
94,50 763020
112,57 763025
146,64 763032
195,48 763040
247,84 763050
322,58 763065
501,01 763080
601,00 763100
822,29 763125
1 848,00 763150
2 415,00 763200
4 158,00
115 120 125 130 140 150 170 180 190 325 350 400Face to face
763 - Stainless steelCF8M-1.4408 body & ball - DIN 3202 F4/F5.
DN 15 20 25 32 40 50 65 80 100
779015
90,88 779020
103,94 779025
138,61 779032
177,29 779040
252,19 779050
356,97 779065
577,01 779080
707,24 779100
1 150,43
108 117 127 140 165 178 190 203 229Face to face
779 - Stainless steel CF8M-1.4408 body & ball - ASME B16.10 - Antistatic system.
ANSI 150 - ISO PN20
Flanges, see page 37
Carbon steel & stainless steel ball valves (continued)
Wafer - ISO pad97/23/CE directive N° 0035 - Risk category II - Flanged PN16 - ISO 5211 mounting pad - Full bore - Anti blow-out stem -Glass reinforced seats - PTFE gaskets & gland pack - Max. pressure 16 bar - Max. temperature 180°C.
DN 15 20 25 32 40 50 65 80 100 125 150
771015
60,00 771020
50,17 771025
64,96 771032
105,77 771040
142,20 771050
188,43 771065
312,93 771080
423,62 771100
629,77 771125
1 736,72 771150
2 183,35
35 39 44 52 64 83 101 118 150 164 182Face to face
771 - Stainless steelCF8M-1.4408 body & ball.
code
price €
3.1
10 €/DN 3 €/pc
3.1
10 €/DN 3 €/pc
Valve & limitswitch
on request
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
15
Flanged PN16
ANSI 150 - ISO PN20
Split body - Reference +97/23/CE directive N°0062 - Risk category III - H module - Plain PTFE TFM1600 seats - Full bore - ISO 5211 mounting pad -Locking device - Ball with decompression hole - Anti blow-out stem - Antistatic system - Max. pressure 40 bar up to DN50,16 bar above - Impact tests available.
code
price €
code
price €
code
price €
code
price €
DN 15 20 25 32 40 50 65 80 100 125 150 200
752015
105,97 752020
119,90 752025
161,70 752032
220,92 752040
227,88 752050
266,20 752065
374,18 752080
468,23 752100
771,28 752125
1 279,85 752150
1 718,75 752200
3 554,47
115 120 125 130 140 150 170 180 190 325 350 400Face to face
752 - Carbon steel1.0619 body - CF8M-1.4408 ball - DIN 3202 F4/F5 - Temperature range: -20°C/+250°C.
DN 15 20 25 40 50 65 80 100 150 200
756015
88,55 756020
95,52 756025
126,87 756040
193,05 756050
252,27 756065
402,05 756080
450,82 756100
694,65 756150
1 610,77 756200
3 370,00
108 117 127 165 178 190 203 229 394 457Face to face
756 - Carbon steelA216WCB body - CF8M-1.4408 ball - ASME B16.10 - Temperature range: -29°C/+250°C.
DN 15 20 25 32 40 50 65 80 100 125 150 200
753015
165,18 753020
200,02 753025
252,27 753032
353,28 753040
419,47 753050
590,15 753065
694,65 753080
938,48 753100
1 447,05 753125
2 446,77 753150
3 505,70 753200
4 301,37
115 120 125 130 140 150 170 180 190 325 350 400Face to face
753 - Stainless steelCF8M-1.4408 body & ball - DIN 3202 F4/F5 - Temperature range: -50°C/+250°C.
DN 15 20 25 40 50 65 80 100 150 200
757015
151,25 757020
161,70 757025
213,95 757040
374,18 757050
517,00 757065
719,03 757080
938,48 757100
1 492,33 757150
2 805,55 757200
5 780,00
108 117 127 165 178 190 203 229 394 457Face to face
757 - Stainless steelCF8M-1.4408 body & ball - ASME B16.10 - Temperature range: -50°C/+250°C.
FUGITIVEEMISSIONSEN 15848-1
ANSI 300 - ISO PN50
code
price €
DN 15 20 25 40 50 80 100 150
768015
99,00 768020
116,42 768025
161,70 768040
259,23 768050
318,45 768080
607,57 768100
928,03 768150
2 290,02
140 152 165 190 216 283 305 403Face to face
768 - Carbon steelA216WCB body - CF8M-1.4408 ball - ASME B16.10 - Temperature range: -29°C/+250°C.
3.1
10 €/DN 3 €/pcFIRE SAFE
Please consult for availability
Stainless steelANSI 300
on request
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
16
3 ways
97/23/CE directive N° 0035 - Risk category II - PTFE seats - 4 seats - 3 ways tightness - Reduced bore -Locking device - Threaded ends - ISO mounting pad - Max. pressure 40 bar - Max. temperature 140°C.
781 code
price €
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
780002 780003 780004 780005 780006 780007 780008 780009780 code
781002
54,90 781003
54,90 781004
54,90 781005
72,85 781006
104,83 781007
169,15 781008
269,71 781009
325,15
780 - Stainless steel - L port781 - Stainless steel - T portCF8M-1.4408 body - 316 ball.
Threaded
Concerned by 3, § 3 from 97/23/CE directive - POM/PTFE ball seats; NBR other seats - Special for highpressure - Max. temperature 100°C.
Ø 1/4" 3/8" 1/2" 3/4" 1"
Max. pressure (bar) 400 400 350 350 350
721002
56,04 721003
58,78 721004
63,12 721005
91,92 721006
109,86
721 - Galvanized carbon steel - L port
Flanged
97/23/CE directive N° 0038 - Risk category II - PTFE seats - 4 seats -3 ways tightness - Full bore - Flanged PN16 - Max. pressure 16 bar -Max. temperature 150°C.
DN 50 65 80 100 125 150
783 code 783050 783065 783080 783100 783125 783150
784050
732,00 784065
1 104,00 784080
1 264,00 784100
2 462,00 784125
4 076,00 784150
4 694,00
783 - Carbon steel - L port784 - Carbon steel - T portA216WCB body - 304 ball.
DN 50 65 80 100 125 150
785 code 785050 785065 785080 785100 785125 785150
786050
1 075,80 786065
1 600,00 786080
1 960,00 786100
3 518,00 786125
5 518,00 786150
7 864,00
785 - Stainless steel - L port786 - Stainless steel - T portCF8M-1.4408 body - 316 ball.
2
3 1 3 1
2
3 1
2
3 1
22
3 1 3 1
2
3 1
2
3 1
2
L portT port
Valve & limit switch on request
Highpressure
784 code
price €
786 code
price €
Carbon steel & stainless steel ball valves (continued)
3.1
10 €/DN 3 €/pc
3.1
10 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
17
3 pieces
Wafer
Split body - ANSI
Silicone free / dry clean for ADLER valves
SW codeprice €
SW codeprice €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
712002 712003 712004 712005 712006 712007 712008 712009 712010 712011 712012BSP code100 100 64 64 40 40 40 40 25 25 20Max. pressure (bar)
712108 712110 712115 712120 712125 712132 712140 712150 712165 712180 712199BW code 712208 93,05
712210 92,00
712215 94,95
712220 104,28
712225 125,23
712232 155,08
712240 214,00
712250 271,85
712265 500,92
712280 686,43
712299 940,92
712 - Carbon steel - BSP threaded, Butt welding & Socket weldingA216WCB body - 304 ball.
ADLER range
97/23/CE directive N° 0038 - Risk category III - H module - 800 lbs WOG - DIN 3202 M3 - Full bore - ISO mounting pad.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
713002 713003 713004 713005 713006 713007 713008 713009 713010 713011 713012BSP code100 100 64 64 40 40 40 40 25 25 20Max. pressure (bar)
713108 713110 713115 713120 713125 713132 713140 713150 713165 713180 713199BW code 713208 116,60
713210 116,60
713215 133,10
713220 155,54
713225 197,90
713232 230,26
713240 350,16
713250 425,34
713265 803,00
713280 1 041,34
713299 1 716,66
713 - Stainless steel - BSP threaded, Butt welding & Socket weldingCF8M - 1.4408 body - 316 ball.
97/23/CE directive N° 0038 - Risk category III - H module - PTFE seats - Full bore -ISO 5211 mounting pad.
DN 15 20 25 32 40 50 65 65/25 80 100 125 150 200
720015 112,22
720020 117,76
720025 130,30
720032 158,28
720040 214,92
720050 318,16
720065 439,50
720066 440,00
720080 558,46
720100 812,86
720125 1 255,70
720150 2 700,10
720200 5 980,62
35 35 43 51 64 85 103 103 120 155 182 234 310Face to face
720 - Carbon steelA105-1.0460 body - 304 ball.
DN 15 20 25 32 40 50 65 80 100 125 150 200
770015 210,25
770020 235,45
770025 277,54
770032 404,37
770040 497,48
770050 758,98
770065 1 104,40
770080 1 848,58
770100 2 886,86
770125 2 240,62
770150 4 433,85
770200 8 607,54
35 38 43 51 64 85 103 120 155 182 234 310Face to face
770 - Stainless steel 316 body & ball.
DN 10-50 65-80 100 125 150 200
9830150
84,67 9830151
102,67 9830152
124,67 9830153
146,67 9830154
160,00 9830155
214,00 code
price €
codeprice €
codeprice €
DN 15 20 25 40 50 65 80 100
766015 196,65
766020 227,38
766025 245,72
766040 345,23
766050 466,06
766065 647,69
766080 759,54
766100 1 250,77
108 118,5 126 165 178 190 203 229Face to face
766 - Carbon steel - ANSI 150 - ISO PN20A105-1.0460 body - 304 ball.
DN 15 20 25 40 50 65 80 100
758015 250,46
758020 252,00
758025 319,42
758040 480,62
758050 587,88
758065 828,55
758080 1 051,32
758100 1 831,08
140 151 165 191 216 241 283 305Face to face
758 - Carbon steel - ANSI 300 - ISO PN50A105-1.0460 body - 304 ball.
codeprice €
codeprice €
3.1
10 €/DN 3 €/pc FIRE SAFE
3.1
10 €/DN 3 €/pc FIRE SAFE
3.1
10 €/DN 3 €/pc
Stainless steelANSI 150
on request
Heating jacket
on request
97/23/CE directive N° 0038 - Risk category III - H module - PTFE seats - Full bore -ISO 5211 mounting pad - Flanged PN16 (except * : PN25).
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
18
DN 40 50 65 80 100 125 150
505040
84,00 505050
90,91 505065
129,74 505080
162,41 505100
233,59 505125
376,26 505150
628,94
136 142 154 160 172 186 200Face to face
505 - NF 29323
code
price €
code
price €
DN 15 20 25 32 40 50 65 80 100 125 150 200
507015
40,44 507020
44,97 507025
51,76 507032
71,50 507040
79,26 507050
95,76 507065
141,71 507080
179,56 507100
243,94 507125
390,14 507150
642,53 507200
934,35
115 120 125 130 140 150 170 180 190 200 210 400Face to face
507 - DIN 3202 F18
Cast iron ball valvesCast iron GG25 body - Stainless steel ball - PTFE seat - Flanged PN10/16 - ISO 5211 mounting pad -Full bore - Anti blow-out stem - Max. pressure 16 bar - Max. temperature 200°C.
code
price €
code
price €
DN 20 25 32 40 50 63
598020
12,25 598025
15,57 598032
19,48 598040
24,15 598050
32,58 598063
42,77
598 - With glued unionsMax. pressure 16 bar up to DN50, 10 bar above.
Ø 1/2" 3/4" 1" 1" 1/4 1" 1/2 2"
599004
12,58 599005
16,15 599006
21,17 599007
24,83 599008
33,45 599009
44,06
599 - With threaded unionsMax. pressure 16 bar up to 1"1/2, 10 bar above.
PVC ball valvesUse: for corrosive fluids - Excluded from 97/23/CE directive (article 1, § 3.2) - PVC body & ends - PTFE ballgaskets - FKM O-ring gaskets - Max. ΔP 3 bar - Max. temperature 60°C.
3 €/pc
Ø 1/4" 3/8" 1/2" 3/4" 1"
521002 521003 521004 521005 521006lever code
521 - NPT threaded
For oxygen - PN10 - Sold with caps.
Ø 1/4" 3/8" 1/2" 3/4" 1"
520002 520003 520004 520005 520006520 code
561002
5,74 561003
6,30 561004
9,74 561005
13,16 561006
21,46
520 - Dry cleaned - White lever561 - Dry cleaned - White butterfly handle
521012
5,90 521013
6,10 521014
9,42 521015
13,50 521016
20,16
Brass ball valvesProducts concerned by article 3, § 3 from 97/23/CE directive - PN40/30 - Nickel platedCW617 brass body - PTFE gland pack - Full bore - Anti-blow out stem.
butterfly handle code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"
25 25 25 25 25 20 20 16 10 10Max. pressure (bar)
552 - Stainless steel handleNickel plated body - Brushed interior - Temperature range: -10°C/+120°C.
552002
4,57 552003
5,00 552004
5,80 552005
8,23 552006
13,97 552007
19,67 552008
21,37 552009
34,83 552010
88,33 552011
112,87 code
price €
561 code
price €
Drinking water
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
19
StandardButterfly valves
97/23/CE - CE 0035 (H) - Gear box recommended for DN200 to 300; some types supplied with gear box - Working temperature with EPDM seat: 110°C (temporarily 130°C) - Max. pressure 16 bar up to DN300, 10 bar above.
16 16 16 16 16 16 16 16 16 16
without gear box code
price €
DN 32-40 50 65 80 100 125 150 200 250 300
1125040
28,21 1125050
30,28 1125065
34,30 1125080
38,32 1125100
48,68 1125125
64,46 1125150
76,61 1125200
120,69 1125250
203,12 1125300
259,84
Max. pressure (bar)
1125 - Body GG25 / Disc GGG40 / Seat EPDM
16 16 16 16 16 16 16 16 16 16
DN 32-40 50 65 80 100 125 150 200 250 300
1123040
30,71 1123050
34,22 1123065
40,88 1123080
46,65 1123100
67,12 1123125
89,92 1123150
116,24 1123200
195,65 1123250
350,47 1123300
496,91
Max. pressure (bar)
1123 - Body GG25 / Disc SS316 / Seat EPDM
16 16 16 16 16 16 10 10 10 10 10 10 10 10 10
DN 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000
1125102
115,43 1125127
134,42 1125152
149,05 1125202
228,87 1125252
328,09 1125302
417,27 1125350
513,79 1125400
797,39 1125450
1 009,95 1125500
1 725,04 1125600
2 387,42 1125700
4 508,00 1125800
5 151,99 1125900
7 900,72 1125990
9 777,45
Max. pressure (bar)
16 16 16 16 16 16 10 10 10 10 10 10 10 10 10
DN 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000
1123102
133,25 1123127
160,70 1123152
192,38 1123202
312,67 1123252
499,03 1123302
694,59 1123350
786,36 1123400
1 248,68 1123450
1 637,61 1123500
2 485,52 1123600
3 655,38 1123700
7 515,47 1123800
8 871,34 1123900
12 653,25 1123990
17 573,96
Max. pressure (bar)
Wafer - Flanged PN10/16 - ANSI 150 (up to DN600)
DN 40-50-65-80 100 125-150 200 250 300
1198001
47,22 1198002
47,22 1198003
47,22 1198004
69,45 1198005
69,45 1198006
86,82
1198 - Gear box (only for butterfly valves 1125, 1123, 1121, 1135 & 1133)
with gear box code
price €
without gear box code
price €
with gear box code
price €
16 16 16 16 16 16 16 16 16 16
DN 32-40 50 65 80 100 125 150 200 250 300
1121040
33,26 1121050
37,07 1121065
44,29 1121080
50,54 1121100
72,71 1121125
97,42 1121150
125,93 1121200
211,95 1121250
379,67 1121300
538,32
Max. pressure (bar)
1121 - Body GG25 / Disc SS316 / Seat NBR - Max. temperature 80°C.
without gear box code
price €
code
price €
Epoxy painted, aluminiumand locking handle with10 positions notched pad.
Epoxy paintThe stem comes throughthe disc for a perfect rigidity.
Vulcanized seat on insertto resist to hammer chockand vacuum.
Disc hold by strias eliminating all mechanicalmoves.
PTFE gaskets for a goodtightness.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
20
97/23/CE directive - CE 0409 Risk category III - B & C modules for: 1150/1151/1152/1153/1154/1157 & 1160/1163 -Gear box recommended above DN200; to be ordered in addition to the valve; some types supplied with gear box -Supplied bare shaft above DN300 - Max. temperature with EPDM seat: 110°C - Max. pressure 16 bar up to DN200 or DN300, 10 bar above.
Reference +
Valve & limitswitch
on request
Butterfly valves (continued)
Lug - Flanged PN10/16
16 16 16 16 16 16 16 16 16 16 16 16 16
DN 40 50 65 80 100 125 150 200 200* 250 250* 300 300*
1135040
32,50 1135050
34,87 1135065
39,51 1135080
44,12 1135100
56,10 1135125
75,27 1135150
89,73 1135200
141,49 1135201
141,50 1135250
239,37 1135251
239,38 1135300
307,11 1135301
307,10
- - - - 1135102
105,64 1135127
125,96 1135152
141,28 1135202
217,90 1135203
217,90 1135252
321,63 1135253
321,63 1135302
410,41 1135303
410,41
Max. pressure (bar)
1135 - Body GG25 / Disc GGG40 / Seat EPDM
16 16 16 16 16 16 16 16 16 16 16 16 16
DN 40 50 65 80 100 125 150 200 200* 250 250* 300 300*
1133040
41,87 1133050
46,82 1133065
55,65 1133080
63,63 1133100
86,83 1133125
116,47 1133150
150,26 1133200
254,81 1133201
254,80 1133250
460,55 1133251
460,55 1133300
599,40 1133301
599,40
- - - - 1133102
148,00 1133127
176,00 1133152
214,00 1133202
346,00 1133203
346,00 1133252
564,00 1133253
564,00 1133302
740,00 1133303
740,00
Max. pressure (bar)
1133 - Body GG25 / Disc SS316 / Seat EPDM
without gear box code
price €with gear box code
price €
without gear box code
price €with gear box code
price €
* Flanged PN16.
* Flanged PN16.
Drinking water
Drinking water
16 16 16 16 16 16 16 16 16 16 16 10 10
without gear box code
price €with gear box code
price €
code
price €
code
price €
code
price €
DN 32 40 50 65 80 100 125 150 200 250 300 350 400
1160032
86,89 1160040
87,91 1160050
88,00 1160065
100,86 1160080
114,12 1160100
127,88 1160125
160,68 1160150
184,55 1160200
347,17 1160250
540,00 1160300
704,00 1160350
881,29 1160400
1 149,11
- - - - - - - - - - - 1160352
988,00 1160402
1 242,00
Max. pressure (bar)
1160 - Body GGG50 / Disc SS316 or GGG50 / Seat EPDMDisc SS316 up to DN100, GGG50 above.
16 16 16 16 16 16 16 16
DN 40 50 65 80 100 125 150 200
1162040
88,68 1162050
92,06 1162065
104,92 1162080
119,14 1162100
132,83 1162125
166,06 1162150
187,82 1162200
352,65
Max. pressure (bar)
1162 - Body GGG50 / Disc SS316 or GGG50 / Seat NBRDisc SS316 up to DN100, GGG50 above.
5 5 5 5 5 5 5 5
DN 40 50 65 80 100 125 150 200
1181040
103,20 1181050
104,00 1181065
107,85 1181080
128,22 1181100
147,17 1181125
180,71 1181150
214,58 1181200
405,29
Max. pressure (bar)
1181 - For gas - Body GGG50 / Disc SS316 or GGG50 / Seat NBRDisc SS316 up to DN100, GGG50 above - Class: MOP5.
16 16 16 16 16 16 16 16 16 16 16 16 16 10 10
DN 40 50 65 80 100 125 150 200 200* 250 250* 300 300* 350 400
1163040
97,14 1163050
101,72 1163065
109,05 1163080
138,92 1163100
161,63 1163125
196,31 1163150
244,74 1163200
453,14 1163201
453,14 1163250
675,35 1163251
675,36 1163300
969,69 1163301
969,70 1163350
1 284,68 1163400
1 801,23
Max. pressure (bar)
1163 - Body GGG50 / Disc SS316 / Seat EPDM
Lug - Flanged PN10/163.1
10 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
Gear box, seepage 19
* Flanged PN16.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
21
16 16 16 16 16 16 16 16 16 16 10 10 10 10 10
without gear box code
price €with gear box code
price €
without gear box code
price €
with gear box code
price €
without gear box code
price €with gear box code
price €
code
price €
code
price €
without gear box code
price €with gear box code
price €
DN 32-40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
1150040
76,09 1150050
76,25 1150065
87,32 1150080
99,32 1150100
111,02 1150125
140,03 1150150
160,00 1150200
230,09 1150250
377,26 1150300
554,58 1150350
732,43 1150400
904,65 1150450
2 863,08 1150500
3 404,03 1150600
5 480,92
- - - - - - - - - - 1150352
830,97 1150402
1 015,14 1150452
3 004,00 1150502
3 564,35 1150602
5 760,00
Max. pressure (bar)
1150 - Body GGG50 / Disc SS316 or GGG50 / Seat EPDMDisc SS316 up to DN100, GGG50 above.
*Includes gear box.
16 16 16 16 16 16 16 16 16 16 10 10 10 10
DN 32-40 50 65 80 100 125 150 200 250 300 350 400 450 500
1153040
90,18
1153050
90,20
1153065
100,15
1153080
123,17
1153100
148,34
1153125
183,63
1153150
224,06
1153200
340,58
1153250
550,00
1153300
836,09
1153350
1 149,05
1153400
1 617,32
1153450
4 187,78
1153500
4 636,12
- - - - - - - - - - 1153352
1 222,35
1153402
1 707,86
1153452
4 320,00
1153502
4 885,04
Max. pressure (bar)
1153 - Body GGG50 / Disc SS316 / Seat EPDM
16 16 16 16 16 16 16 16 16 16 10 10 10 10
DN 32-40 50 65 80 100 125 150 200 250 300 350 400 450 500
1152040
79,82 1152050
80,62 1152065
91,23 1152080
103,72 1152100
115,66 1152125
144,37 1152150
164,37 1152200
243,17 1152250
388,74 1152300
575,78 1152350
797,82 1152400
1 067,97 1152450
3 553,60 1152500
4 410,09
- - - - - - - - - - 1152352
921,89 1152402
1 146,07 1152412
3 720,00 1152502
4 640,00
Max. pressure (bar)
1152 - Body GGG50 / Disc SS316 or GGG50 / Seat NBRDisc SS316 up to DN100, GGG50 above.
16 16 16 16 16 16 16 16 16 16
DN 32-40 50 65 80 100 125 150 200 250 300
1151040
91,45 1151050
91,85 1151065
102,31 1151080
128,80 1151100
123,69 1151125
183,82 1151150
228,18 1151200
357,38 1151250
556,89 1151300
849,14
Max. pressure (bar)
1151 - Body GGG50 / Disc SS316 / Seat NBR
16 16 16 16 16 16 16 16 16 16 10 10 10 10 10
DN 32-40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
1154040
176,40 1154050
185,23 1154065
204,00 1154080
232,89 1154100
273,72 1154125
386,25 1154150
510,18 1154200
747,45 1154250
1 379,94 1154300
1 641,75 1154350
2 100,00 1154400
3 447,02 1154450
7 100,00 1154500
8 758,77 1154600
13 754,00
- - - - - - - - - 1154352
2 762,00 1154402
3 530,00 - - -
Max. pressure (bar)
1154 - Body GGG50 / Disc SS316 / Seat FKM (Viton®)
16 16 16 16 16 16 16 16
DN 32-40 50 65 80 100 125 150 200
1157040
129,82 1157050
135,17 1157065
154,80 1157080
185,45 1157100
213,20 1157125
266,00 1157150
324,58 1157200
467,48
Max. pressure (bar)
1157 - Body GGG50 / Disc SS316 / Seat Silicone
Wafer - Flanged PN10/16 - ANSI 150 (up to DN400)
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
code
price €
16 16 16 16 16 16 16 10 10 10
DN 32-40 50 65 80 100 125 150 200 250* 300*
1145040
289,24 1145050
319,72 1145065
389,78 1145080
454,49 1145100
596,92 1145125
786,91 1145150
930,66 1145200
1 256,77 1145250
1 947,66 1145300
2 575,13
Max. pressure (bar)
1145 - Body GGG50 / Disc SS316 / Seat PTFE3.1
10 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
Drinking water
Drinking water
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
22
code
price €
code
price €
107 107 124 134 138 144 154 170
DN 40 50 65 80 100 125 150 200
1196040
45,64 1196050
52,46 1196065
61,06 1196080
68,46 1196100
87,48 1196125
124,72 1196150
147,94 1196200
173,18
Length140 150 170 180 190 200 210 230DIN total length
1196 - Cast iron sleeve - DIN 3202 F18
DN 50 65 80-100 125-150 200 250 300 350 400 450 500 600
1197050
76,08 1197065
76,08 1197100
76,08 1197150
76,08 1197200
76,08 1197250
138,44 1197300
138,44 1197350
220,00 1197400
240,00 1197451
380,00 1197501
440,00 1197601
580,00
1197 - Gear box with position indicator for “Reference +” (only for "Reference +" butterfly valves, pages 20 to 22)
Butterfly valves (continued)
FM
DN 32-40 50 65 80 100 125 150 200
1111040
143,02 1111050
143,30 1111065
165,48 1111080
190,22 1111100
220,10 1111125
263,48 1111150
341,48 1111200
496,14
1112040
329,90 1112050
451,06 1112065
490,98 1112080
541,20 1112100
665,68 1112125
833,34 1112150
979,08 1112200
1 484,32
1111 - Body Carbon steel / Disc SS316 or GGG50 - Disc SS316 up to DN100, GGG50 above.1112 - Body SS316 / Disc SS316
Uncomplete tightness;loss factor: 1,5 to 2%
of Kvs.
16 16 16 16 16 16 16 10 10 10
code
price €
DN 32-40 50 65 80 100 125 150 200 250* 300*
1155040
820,00 1155050
825,84 1155065
852,92 1155080
866,46 1155100
1 045,84 1155125
1 238,00 1155150
1 411,38 1155200
1 864,92 1155250
2 937,74 1155300
3 960,49
Max. pressure (bar)
1155 - Body GGG50 / Disc CF8M + PTFE / Seat PTFE
16 16 16 16 16 16 16 16 10 10
code
price €
DN 32-40 50 65 80 100 125 150 200 250 300
1146040
124,11 1146050
124,11 1146065
144,32 1146080
177,38 1146100
217,11 1146125
354,77 1146150
430,92 1146200
726,38 1146250
1 488,58 1146300
2 348,28
Max. pressure (bar)
1146 - Body GGG50 / Disc Uranus B6 / Seat Hypalon®
16 16 16 16 16 16 16 16 16 16
code
price €
DN 32-40 50 65 80 100 125 150 200 250 300
1147040
94,69 1147050
94,69 1147065
108,15 1147080
117,95 1147100
136,21 1147125
167,29 1147150
199,41 1147200
313,66 1147250
491,54 1147300
718,87
Max. pressure (bar)
1147 - Body GGG50 / Disc SS316 or GGG50 / Seat Nitrile carboxylDisc SS316 up to DN100, GGG50 above.
5 5 5 5 5 5 5 5
DN 32-40 50 65 80 100 125 150 200
1141040
87,17 1141050
90,80 1141065
102,65 1141080
115,32 1141100
129,97 1141125
159,94 1141150
190,00 1141200
288,58
Max. pressure (bar)
1141 - For gas - Body GGG50 / Disc SS316 or GGG50 / Seat NBRDisc SS316 up to DN100, GGG50 above - Class: MOP5.
16 16 16 16 16 16 16 16 16
DN 50 65 80 100 125 150 200 250 300
1144050
432,89 1144065
444,80 1144080
457,26 1144100
469,78 1144125
616,68 1144150
638,71 1144200
967,72 1144250
1 126,25 1144300
1 628,55
Max. pressure (bar)
1144 - For fire network - Body GGG50 / Disc CF8M or GGG50 / Seat EPDMDisc CF8M up to DN100, GGG50 above - All diameters supplied with gearbox.
code
price €
code
price €
1111 code
price €
1112 code
price €
Smoke.Uncomplete
tightness
3.110 €/DN 3 €/pc
3.110 €/DN
3.110 €/DN
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
code
price €
103 99 108 114 120 130 144 168
DN 40 50 65 80 100 125 150 200
1195040
30,32 1195050
36,96 1195065
48,71 1195080
58,75 1195100
71,25 1195125
99,25 1195150
136,43 1195200
157,18
Length136 142 154 160 172 186 200 228NF total length
1195 - Cast iron sleeve - NF 29323
Other types & diameterson request
*Includes gear box.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
23
code
price €
Ø 1/4" 3/8" 1/2" 3/4"
482002
24,46 482003
25,88 482004
29,17 482005
42,74
482 - BronzeBrass hat - Max. pressure 25 bar - Max. temperature 180°C.
Ø 1/4" 3/8" 1/2" 3/4" 1"
484002 484003 484004 484005 484006484 code
483002 483003 483004 483005 483006483 code
486008
42,58 486010
42,58 486015
48,02 486020
57,32 486025
92,28
484 - A105/F6 forged steel - NPT threaded483 - A105/F6 forged steel - BSP threaded486 - A105/F6 forged steel - Socket weldingGraphite gland pack - 3000 psi - Max. pressure 200 bar - Max. temperature 250°C.
Ø 1/4" 3/8" 1/2" 3/4"
481002
487002
37,20
481003
487003
42,07
481004
487004
53,16
481005
487005
83,60
481 - Stainless steel - BSP487 - Stainless steel - NPTMax. pressure 400 bar - Temperature range: -20°C/+180°C.
Needle valvesFor compatible common fluids of group 2 - Concerned by article 3, § 3 from 97/23/CE directive.
Bi-directional use - Supplied with gear box above DN150 - Temperature range: -20°C/+210°C.
481 code
487 code
price €
486 code
price €
Highpressure
25 25 25 25 25 25 25 25 25 25
DN 50 65 80 100 125 150 200 250 300 350
1113050
469,27 1113065
478,45 1113080
599,29 1113100
682,81 1113125
862,19 1113150
962,94 1113200
1 702,86 1113250
2 280,34 1113300
3 102,35 1113350
4 416,59
Max. pressure (bar)
1113 - Body A216WCB / Disc CF8M / Seat PTFE-Graphite
25 25 25 25 25 25 25 25 25 25
DN 50 65 80 100 125 150 200 250 300 350
1114050
551,02 1114065
613,56 1114080
828,28 1114100
970,98 1114125
1 228,75 1114150
1 370,36 1114200
2 327,26 1114250
3 142,82 1114300
4 344,76 1114350
6 199,53
Max. pressure (bar)
1114 - Body CF8M / Disc CF8M / Seat PTFE-Graphite
Wafer - Flanged PN25
code
price €
code
price €
25 25 25 25 25 25 25 25 25 25
DN 50 65 80 100 125 150 200 250 300 350
1115050
469,27 1115065
478,45 1115080
599,29 1115100
682,81 1115125
862,19 1115150
962,94 1115200
1 702,86 1115250
2 280,34 1115300
3 102,35 1115350
4 416,59
Max. pressure (bar)
1115 - Body A216WCB / Disc CF8M / Seat PTFE-Graphite
code
price €
code
price €
DN 50-65 80 100 125-150
1193001
56,00 1193002
56,00 1193003
94,00 1193004
99,80
1193 - Gear box with position indicator (only for butterfly valves 1113, 1114 & 1115)
Double eccentric construction 3.1
10 €/DN 3 €/pc FIRE SAFE
3.1
10 €/DN 3 €/pc
3.1
10 €/DN 3 €/pc
Stainless steelwafer ANSI 150
on requestPlease consult for availability
Wafer - ANSI 150 - ISO PN20
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
24
Gate valve
Excluded from 97/23/CE directive (article 1, § 3.2).
code
price €
code
price €
code
price €
DN 40 50 65 80 100 125 150 200 250 300
150040
57,47 150050
67,64 150065
78,18 150080
93,87 150100
134,82 150125
186,82 150150
241,34 150200
421,78 150250
574,76 150300
843,19
140 150 170 180 190 200 210 230 250 270Face to face
140 150 170 180 190 200 210 230 230 250 250 270 270Face to face
150 - Cast iron GG25 - Metal seatFlanged PN10 - DIN 3202 F4 - Max. pressure 10 bar up to DN150, 6 bar above - Max. temperature 90°C.
code
price €
DN 40 50 65 80 100 125 150 200 200* 250 250* 300 300*
180040
59,27 180050
73,83 180065
87,37 180080
104,37 180100
132,83 180125
199,17 180150
232,47 180200
389,70 180201
389,70 180250
616,04 180251
616,03 180300
893,40 180301
893,40
180 - Resilient seated gate valveDuctile iron GGG50 body - EPDM wedge - DIN 3202 F4 - Flanged PN10/16 - Temperature range: -10°C/+120°C - Max. pressure 16 bar - Non rising stem - Full and total bore - Clockwise closing - Epoxy coated.
Globe valves
Use: for compatible common fluids of group 2 - 97/23/CE directive N° 0497 - Risk category III.
Threaded
Threaded
Flanged
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
451002
56,17 451003
56,60 451004
65,03 451005
86,90 451006
117,70 451007
195,47 451008
238,60 451009
332,97
451 - BronzeWith union hat - Stainless steel globe & seat - Max. pressure 25 bar - Max. temperature 180°C.
Ø 1/2" 3/4" 1" 1"1/4 1"1/2 2"
485004
32,80 485005
35,27 485006
51,13 485007
67,00 485008
87,53 485009
109,07
485 - Stainless steel 316Metal seat - Max. pressure 16 bar - Max. temperature 180°C.
Use: for compatible common fluids of group 2 - Module A of 97/23/CE directive - Risk category I.
Floating ball valvesExcluded from 97/23/CE directive (article 1, § 3.2).
code price €
code
price €
Ø male 1/2" 3/4" 1" 1"1/4 1"1/2 2"
490004 42,23
490005 96,57
490006 109,03
490007 154,70
490008 263,80
490009 356,80
490 - BrassStainless steel inner mechanism - PE ball - EPDM gasket - Max. pressure 10 bar - Max. temperature 40°C. Ø male 3/4" 3/4"
Ø ball 156 245
494005
330,00 494105
340,00
6 8Max. pressure (bar)120 150 180 220 220 300Ø ball
494 - Stainless steel304 body & inner mechanism - 316 ball - FKM gasket - Max. temperature 90°C.
* Flanged PN16.
code
price €
DN 40 50 65 80 100 125 150 200 250 300
9801831
9,44 9801831
9,44 9801831
9,44 9801832
9,60 9801832
9,60 9801833
10,68 9801833
10,68 9801833
10,68 9801834
17,04 9801834
17,04
98018 - Square cap for 180
code
price €
Ø 1/2" 3/4" 1" 1"1/4 1"1/2 2"
106004
52,72 106005
64,57 106006
78,63 106007
100,64 106008
131,52 106009
162,72
106 - Stainless steelCF8M-1.4408 body & gate - PTFE seats - Max. pressure 16 bar - Temperature range: -20°C/+180°C.
Flanges, see page 37
3.110 €/DN
Concerned by article 3, § 3 from 97/23/CE directive.
3.110 €/DN
97/23/CE directive N°0038 - H module.Please consult for availability
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
25
Flanged
code
price €
DN 15 20 25 32 40 50 65 80 100 125 150 200
470015
25,26 470020
29,29 470025
38,61 470032
53,28 470040
69,22 470050
90,08 470065
106,47 470080
151,78 470100
196,58 470125
316,88 470150
418,94 470200
730,47
130 150 160 180 200 230 290 310 350 400 480 600Face to face
470 - Cast iron GG25 - Flanged PN16Stainless steel stem & seat - DIN 3202 F1 - Rising stem - Max. pressure 16 bar - Temperature range: -10°C/+120°C.
Use: for compatible common fluids of group 2 - Concerned by article 3, § 3 from 97/23/CE directive.
Use: for compatible common fluids of group 2 - 97/23/CE directive N° 0062 - Risk category III - H module.
DN 15 20 25 32 40 50 65 80 100 125 150 200
479015
44,21 479020
47,91 479025
59,09 479032
71,85 479040
75,03 479050
94,21 479065
142,21 479080
186,79 479100
274,62 479125
381,62 479150
476,26 479200
1 211,85
130 150 160 180 200 230 290 310 350 400 480 600Face to face
479 - Cast iron GG25 - Flanged PN16 - High temperatureStainless steel seat & stem - DIN 3202 F1 - Rising stem - Max. pressure 16 bar - Temperature range: -10°C/+300°C.
DN 15 20 25 32 40 50 65 80 100 125 150 200
476015
138,79 476020
146,02 476025
164,81 476032
193,73 476040
222,64 476050
258,78 476065
355,65 476080
455,40 476100
608,65 476125
938,27 476150
1 182,59 476200
3 226,83
130 150 160 180 200 230 290 310 310 400 480 600Face to face
Use: for compatible common fluids of group 2 - 97/23/CE directive N° 0062 - Risk category III.
DN 15 20 25 32 40 50 65 80 100 125 150 200
471015
124,21 471020
139,03 471025
146,41 471032
216,06 471040
250,53 471050
286,94 471065
466,44 471080
624,35 471100
859,88 471125
1 354,18 471150
1 681,56 471200
2 685,15
130 150 160 180 200 230 290 310 350 400 480 600Face to face
471 - Carbon steel - Flanged PN25/40A216WCB body - Stainless steel seat & stem - DIN 3202 F1 - Rising stem - Max. pressure 40 bar - Temperature range: -20°C/+400°C.
Use: for common fluids - 97/23/CE directive N° 0062 - Risk category III - H module.
DN 15 20 25 32 40 50 65 80 100 125 150 200
475015
247,85 475020
221,56 475025
246,29 475032
354,32 475040
416,38 475050
509,91 475065
784,09 475080
990,94 475100
1 162,32 475125
1 915,94 475150
2 182,62 475200
5 301,29
130 150 160 180 200 230 290 310 350 400 480 600Face to face
475 - Carbon steel - Flanged PN25/40 - With stainless steel bellowA216WCB body - Stainless steel seat, stem & bellow - DIN 3202 F1 - Rising stem - Max. pressure 40 bar - Temperature range: -20°C/+400°C.
Use: for common fluids - 97/23/CE directive N° 0062 - Risk category III - H module.
476 - Ductile iron GGG40 - Flanged PN16 - With stainless steel bellowStainless steel seat, stem & bellow - DIN 3202 F1 - Non rising stem - Max. pressure 16 bar (steam: 10 bar max.) - Temperature range: -10°C/+350°C.
code
price €
code
price €
code
price €
code
price €
3.110 €/DN
3.110 €/DN
3.110 €/DN
3.110 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
26
Forged valves
Directive 97/23/CE N° 0036, H module - Risk category III - ASTM A105 carbon steel body - 1/2 stellite trim 8 -Bolted gland pack & bonnet - Rising stem for gate & globe valves - Max. pressure 138 bar - Temperaturerange: -20°C/+440°C.
114 code
price €
414 code
price €
404 code
price €
314 code
price €
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
113003 113004 113005 113006 113007 113008 113009113 code
112010 112015 112020 112025 112032 112040 112050112 code
114003
44,88 114004
44,88 114005
49,69 114006
64,76 114007
98,09 114008
126,95 114009
157,08
113 - NPT threaded112 - Socket welding 114 - BSP threaded
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
413003 413004 413005 413006 413007 413008 413009413 code
412010 412015 412020 412025 412032 412040 412050412 code
414003
51,61 414004
51,61 414005
57,38 414006
74,37 414007
113,80 414008
152,91 414009
181,44
413 - NPT threaded412 - Socket welding 414 - BSP threaded
Globe valvesF6 globe - A410 stellite seat - Graphite gland pack.
Ø 1/2" 3/4" 1" 1"1/4 1"1/2 2"
403004 403005 403006 403007 403008 403009403 code
402015 402020 402025 402032 402040 402050402 code
404004
151,81 404005
159,21 404006
200,95 404007
330,54 404008
330,54 404009
460,47
403 - NPT threaded402 - Socket welding 404 - BSP threaded
Globe valves with stainless steel bellow
Gate valves F6 gate - A410 stellite seat - Graphite gland pack.
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
313003 313004 313005 313006 313007 313008 313009313 code
312010 312015 312020 312025 312032 312040 312050312 code
314003
38,47 314004
38,47 314005
42,64 314006
55,46 314007
85,59 314008
111,56 314009
137,20
313 - NPT threaded312 - Socket welding 314 - BSP threaded
Piston check valvesA410 piston - A410 stellite seat - With spring - All positions.
Carbon steel - 800 lbs 3.1
10 €/DN 3 €/pc
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
27
318 code
price €
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
319003 319004 319005 319006 319007 319008 319009319 code
318010
38,24 318015
38,40 318020
42,32 318025
54,59 318032
85,00 318040
110,12 318050
136,15
319 - NPT threaded318 - Socket welding
Ball check valvesA410 ball - A410 stellite seat - Horizontal mounting.
Y-strainers
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
359003 359004 359005 359006 359007 359008 359009359 code
358010
173,16 358015
173,16 358020
193,73 358025
284,61 358032
571,85 358040
572,97 358050
743,92
359 - NPT threaded358 - Socket welding
Ball check valves316 ball & seat.
152 code
price €
452 code
price €
358 code
price €
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
153003 153004SF 153005SF 153006SF 153007 153008 153009153 code
152010
170,17 152015
170,17 152020
189,99 152025
284,61 152032
561,00 152040
562,87 152050
743,51
153 - NPT threaded152 - Socket welding
Gate valvesF316 gate - 316 seat - Graphite gland pack.
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
453003 453004 453005 453006 453007 453008 453009453 code
452010
190,37 452015
190,37 452020
212,81 452025
313,04 452032
629,07 452040
630,19 452050
831,59
453 - NPT threaded452 - Socket welding
Globe valvesF316 globe - 316 seat - Graphite gland pack.
Directive 97/23/CE N° 0036, H module - Risk category III - Stainless steel 316 body & inner parts - TRIM 10 (F316, standardstainless steel 316 on seat and stem) - Bolted gland pack & bonnet - Rising stem for gate & globe valves - Max. pressure138 bar - Temperature range: -30°C/+440 °C.
Stainless steel 316 - 800 lbs 3.1
10 €/DN 3 €/pc
3.1
10 €/DN 3 €/pc
3.1
10 €/DN 3 €/pc
234 code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
234002
44,00 234003
44,80 234004
44,80 234005
57,14 234006
91,50 234007
183,46 234008
184,14 234009
305,66
232008 232010 232015 232020 232025 232032 232040 232050232 code
231002 231003 231004 231005 231006 231007 231008 231009231 code
231 - BSP threaded232 - Socket welding234 - NPT threaded
Use: for compatible common fluids of group 2 - 97/23/CE directive N° 1115 - Risk category II - Use : steam - Forged A105carbon steel - Mesh 0,8 mm - With draining cap - Max. pressure 138 bar - Temperature range: -20°C/+440°C.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
28
Y-strainersThreaded
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
230002
10,56 230003
10,60 230004
10,60 230005
12,56 230006
25,30 230007
31,08 230008
41,90 230009
60,04
230 - Stainless steel
Use: for compatible common fluids of group 2 - 97/23/CE directive N° 0035 - Risk category II -Mesh 1 mm - With draining cap - Max. pressure 16 bar - Max. temperature 200°C.
FlangedFor compatible common fluids of group 2 - Concerned by article 3, § 3 from 97/23/CE directive.
DN 15 20 25 32 40 50 65 80 100 125 150 200 200* 250 250** 300 300** 350 400
220015
20,47
220020
22,67
220025
24,87
220032
35,31
220040
40,97
220050
52,77
220065
70,23
220080
95,49
220100
125,11
220125
187,49
220150
268,56
220200
456,95
220201
456,95
220250
784,34
220251
784,34
220300
1 120,09
220301
1 120,09
220350
1 665,66
220400
2 207,86
130 150 160 180 200 230 290 310 350 400 480 600 600 730 730 850 850 980 1100Face to face
1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,5 1,5 1,5 1,5 1,5 1,5 1,5 3 3Mesh (mm)
220 - Cast ironFlanged PN16 up to DN200 (except*: PN10), PN10 above (except**: PN16) - DIN 3202 F1 - Stainless steel screen - With draining cap - Max. pressure 16 bar up to DN200, 10 bar above - Max. temperature 120°C.
For compatible common fluids of group 2 - 97/23/CE directive N° 0062 - Risk category I up to DN80, risk category II above.
DN 15 20 25 32 40 50 65 80 100 125 150 200
235015
105,18 235020
138,97 235025
149,19 235032
191,10 235040
235,76 235050
286,39 235065
286,87 235080
438,09 235100
664,56 235125
892,99 235150
1 226,62 235200
2 164,60
130 150 160 180 200 230 290 310 350 400 480 600Face to face
235 - Carbon steelFlanged PN25/40 - DIN 3202 F1 - Max. pressure 40 bar - Max. temperature 400°C.
For compatible common fluids of group 2 - 97/23/CE directive N° 0035 - Risk category I up to DN50, risk category II above.
DN 15 20 25 32 40 50 65 80 100 125 150 200
240015
145,59 240020
165,14 240025
196,56 240032
267,12 240040
286,25 240050
356,81 240065
529,35 240080
661,92 240100
1 024,46 240125
1 270,31 240150
2 712,70 240200
3 231,71
130 150 160 180 200 230 290 310 350 400 480 630Face to face
0,8 0,8 0,8 0,8 0,8 0,8 1 1 3 3 3 3Mesh (mm)
240 - Stainless steel Flanged PN16 - DIN 3202 F1 - Max. pressure 16 bar - Max. temperature 180°C.
code
price €
code
price €
code
price €
1 1 1 1 1 1 1,25 1,25 1,6 1,6 1,6 1,6Mesh (mm)
DN 15 20 25 32 40 50 65 80 100
165015
37,77 165020
41,97 165025
44,07 165032
54,56 165040
71,35 165050
81,84 165065
121,71 165080
155,29 165100
218,24
130 150 160 180 200 230 290 310 350Face to face
1 1 1 1 1 1 1,25 1,25 1,6Mesh (mm)
225 - Cast iron - Steam useFlanged PN16 - DIN 3202 F1 - Max. pressure 16 bar - Max. temperature 300°C.
code
price €
DN 40 50 65 80 100 125 150 200* 200 250 250** 300 300**
233040
65,54 233050
76,55 233065
107,66 233080
134,70 233100
175,27 233125
341,74 233150
369,01 233200
550,36 233201
550,36 233250
954,09 233251
954,09 233300
1 470,52 233301
1 470,52
200 230 290 310 350 400 480 600 600 730 730 850 850Face to face
2 2 2 2 2 3,15 3,15 5 5 5 5 5 5Mesh (mm)
233 - Ductile iron - Water useFlanged PN16 up to DN200 (except*: PN10), PN 10 above (except**: PN16 - DIN 3202 F1 - Epoxy paint - Stainless steel screen, screws & bolts - Max pressure 16 bar up to DN200,10 bar above - Max. temperature 80°C.
code
price €
3.110 €/DN
3.110 €/DN
3.110 €/DN
3.110 €/DN
3.110 €/DN 3 €/pc
Steam
Concerned by article 3, § 3 from 97/23/CE directive.
Please consult for availability
97/23/CE directive N° 0062 - Risk category III.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
29
Check valvesStainless steel - All positions
380 code384 codeprice €
382 code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
380002 384002 27,16
380003 384003 32,00
380004 384004 34,40
380005 384005 41,66
380006 384006 54,24
380007 384007 71,66
380008 384008 93,76
380009 384009 140,00
380010 -
235,06
380011 -
339,04
380012 -
563,84
380 - Female-FemaleMax. pressure 63 bar - Max. temperature 200°C.
384 - Female-Female. NPT threadedMax. pressure 63 bar - Max. temperature 200°C.
Ø 8 10 15 20 25 32 40 50 65 80 100
381008 381010 381015 381020 381025 381032 381040 381050 381065 381080 381100381 code
382008
27,70 382010
30,00 382015
34,94 382020
40,84 382025
50,84 382032
69,56 382040
95,24 382050
132,70 382065
236,74 382080
340,00 382100
504,86
381 - Butt weldingMax. pressure 63 bar - Max. temperature 200°C.
382 - Socket welding Max. pressure 63 bar - Max. temperature 200°C.
97/23/CE directive N° 0035 - Risk category II.
DN 15 20 25 32 40 50 65 80 100
386015
18,51 386020
23,97 386025
29,54 386032
37,66 386040
49,55 386050
68,59 386065
105,98 386080
160,76 386100
238,83
386 - Wafer flanged PN10/16/25/40 & ANSI 150/300Max. pressure 40 bar - Max. temperature 200°C.
Ø 1/4" 3/8" 1/2" 3/4" 1"
388002 388003 388004 388005 388006388 code
16,5 20 22 28 32 40 46 50 60Face to face
389002
172,56 389003
175,04 389004
175,62 389005
232,62 389006
289,66
388 - Female-FemaleWith ball - Max. pressure 400 bar - Max. temperature 180°C.
389 - Female-Female - NPT threadedWith ball - Max. pressure 400 bar - Max. temperature 180°C.
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
350002
48,49 350003
49,29 350004
54,37 350005
69,57 350006
95,29 350007
160,94 350008
205,69 350009
280,66
350 - Bronze Stainless steel inner mechanism - Max. pressure 25 bar - Max. temperature 180°C.
Vertical lift97/23/CE directive N° 0497 - Risk category III.
97/23/CE directive N° 0496 - Risk category III, H module.
code
price €
code
price €
389 code
price €
code
price €
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
383003
42,90 383004
52,14 383005
62,64 383006
79,04 383007
98,46 383008
126,20 383009
181,30 383010
341,74 383011
449,06 383012
682,46
383 - With strainer basketMax. pressure 63 bar - Max. temperature 200°C.
Highpressure
3.110 €/DN 3 €/pc
3.110 €/DN 3 €/pc
3.110 €/DN
3.110 €/DN
3.110 €/DN 3 €/pc
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
30
code
price €
Ø 1/4" 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2"
320002
26,40 320003
26,40 320004
26,40 320005
29,34 320006
36,00 320007
54,00 320008
68,00 320009
104,00
320 - Stainless steel - Female-FemaleMax. pressure 16 bar - Max. temperature 200°C.
362 code
price €
DN 40 50 65 80 100 125 150 200
360040 360050 360065 360080 360100 360125 360150 360200
180 200 240 260 300 350 400 500
360 code
Face to face
362040
66,06 362050
74,99 362065
95,83 362080
109,23 362100
168,42 362125
245,58 362150
282,95 362200
534,98
360 - Cast iron - Metal / MetalMax. pressure 16 bar - Max. temperature 120°C for 360, 80°C for 362.
362 - Cast iron - Metal / EPDM
364 code
351 code
price €
DN 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
14 14 14 14 18 18 20 22 26 28 36 41 50 56 56Face to face
364040
351040
19,82
364050
351050
21,45
364065
351065
25,04
364080
351080
30,36
364100
351100
39,78
364125
351125
53,47
364150
351150
65,44
364200
351200
105,06
364250
351250
166,27
364300
351300
266,74
364350
-
351,19
364400
-
519,24
364450
-
798,61
364500
-
1 060,02
364600
-
1 591,65
364 - Carbon steel - EPDM gasketMax. pressure 16 bar up to DN200, 10 bar above - Max. temperature 110°C for 364, 80°C for 351.
DN 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
14 14 14 14 18 18 20 22 26 28 36 41 50 56 56
54 54 57 64 70 76 95 108 144 184 191 203 213 222
Face to face
Face to face
54 54 57 64 70 76 95 108 144 184 191 203 213 222Face to face
365040 49,02
365050 53,50
365065 74,51
365080 90,70
365100 115,27
365125 164,83
365150 223,08
365200 426,54
365250 629,49
365300 907,49
365350 1 482,00
365400 2 096,98
365450 2 858,26
365500 3 743,10
365600 5 154,06
365 - Stainless steel 316 - FKM (Viton®) gasketMax. pressure 16 bar up to DN200, 10 bar above - Max. temperature 180°C.
97/23/CE directive - Risk category I - A module.
Excluded from 97/23/CE directive (article 1, § 3-2) - Flanged PN16 - DIN 3202-F6.
Excluded from 97/23/CE directive (article 1, § 3-2) - NF 29337.
DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600
370050
20,62 370065
25,26 370080
33,04 370100
41,52 370125
51,88 370150
69,12 370200
118,10 370250
151,62 370300
240,90 370350
516,52 -
370400
730,52 -
370450
986,50 -
370500
1 297,72 -
370600
1 538,00 -
370 - Cast iron - NBR gasket Flanged PN10/16 - Max. pressure 16 bar up to DN300, 10 bar above - Max. temperature 90°C for 370, 110°C for 371.
371 - Cast iron - EPDM gasket - Stainless steel plate
351 - Carbon steel - NBR gasket
DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600
372050
116,40 372065
140,92 372080
197,97 372100
263,45 372125
348,84 372150
491,94 372200
942,17 372250
1 292,53 372300
1 814,97 372350
3 751,46 372400
5 012,45 372450
6 635,96 372500
8 763,87 372600
10 844,51
372 - Stainless steel 316 - FKM (Viton®) gasket Flanged PN25 up to DN200, PN10/16 above - Max. pressure 16 bar up to DN300, 10 bar above - Max. temperature 200°C.
97/23/CE directive N° 0035 - Risk category II.
Swing
Wafer swing - Single plate
Wafer swing - Dual plate
codeprice €
370 code
price €
371 code
price €
code
price €
Check valves (continued)
3.1
10 €/DN
3.1
10 €/DN
3.1
10 €/DN
371050
25,96 371065
30,06 371080
41,64 371100
53,32 371125
73,20 371150
99,78 371200
176,00 371250
273,48 371300
396,00
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
31
Cast iron - Spring
DN 50 65 80 100 125 150 200 250 300
366050
112,31 366065
137,60 366080
180,09 366100
239,82 366125
329,14 366150
404,12 366200
750,37 366250
1 288,46 366300
3 226,06
100 120 140 165 195 230 290 355 400Face to face
366 - Flanged PN16 - Reference +Max. pressure 16 bar - Max. temperature 130°C - GGG40 throttle - EPDM gasket.
code
price €
code
price €
code
price €
DN 50 65 80 100 125 150 200 250 300
369050
68,37 369065
88,27 369080
112,30 369100
150,57 369125
226,27 369150
289,40 369200
572,47 369250
978,03 369300
1 489,03
100 120 135 165 200 231 288 354 395Face to face
369 - Flanged PN16 - StandardMax. pressure 16 bar - Max. temperature 110°C - 304 throttle - EPDM gasket.
Concerned by article 3, § 3 from 97/23/CE directive - GG25 body.
Excluded from 97/23/CE directive (article 1, § 3.2).
DN 50 65 80 100 125 150 200 250 300
363050
152,80 363065
180,95 363080
234,98 363100
317,42 363125
420,83 363150
509,66 363200
913,26 363250
1 571,63 363300
3 486,03
363 - Flanged PN16 with strainer basket - Reference +All positions - Steel strainer - Max. temperature 130°C.
Cast iron & ductile iron - BallExcluded from 97/23/CE directive (article 1, § 3.2) - For water treatment and water distribution networks - EN 12050-4 for lifting stations.
Ø 1" 1"1/4 1"1/2 2" 2"1/2 3"
335006
58,06 335007
58,09 335008
58,76 335009
68,29 335010
99,06 335011
174,15
141 141 150 175 214 248Face to face
335 - Threaded - Reference +GG25 body - Phenolic resin ball up to 1"1/2, coated NBR aluminium ball above - Max. pressure 10 bar - Max. temperature 70°C.
code
price €
code
price €
Ø 1" 1"1/4 1"1/2 2" 2"1/2 3"
331006
28,30 331007
38,87 331008
40,63 331009
51,17 331010
70,77 331011
92,90
85 85 90 115 135 160Face to face
331 - Threaded - StandardGGG40 NBR ball up to 1"1/2, coated NBR aluminium ball above - Max. pressure 10 bar - Max. temperature 80°C.
code
price €
DN 40 50 65 80 100 125 150 200 250 300 350 400
180 200 240 260 300 350 400 500 600 700 800 900Face to face
336040
153,74 336050
154,00 336065
154,00 336080
182,44 336100
253,50 336125
421,82 336150
457,91 336200
843,18 336250
1 942,91 336300
2 611,00 336350
4 025,79 336400
7 188,82
336 - Flanged PN10/16 - Reference +GG25 body - Phenolic resin ball for DN40, coated NBR aluminium ball for DN50 to 200, coated NBR ductileiron ball above - Flanged PN16 up to DN150, PN10 above - Max. pressure 10 bar - Max. temperature 70°C.
code
price €
DN 40 50 65 80 100 125 150 200 250 300
178 200 240 260 300 350 400 500 600 700Face to face
332040
74,33 332050
82,37 332065
117,63 332080
129,37 332100
168,70 332125
305,20 332150
331,50 332200
684,57 332250
1 020,07 332300
1 609,40
332 - Flanged PN10/16 - StandardDuctile iron body & ball - NBR ball for DN40, coated NBR aluminium ball above - Flanged PN16 up toDN150, PN10 above - Max. pressure 10 bar - Max. temperature 80°C.
code
price €
DN 50 65 80 100 125 150 200 250
368050
102,00 368065
132,00 368080
186,00 368100
254,00 368125
342,00 368150
438,00 368200
792,00 368250
1 284,84
368 - Flanged PN16 with strainer basket - StandardAll positions - Steel strainer - Max. temperature 110°C.
Drinking water
Drinking water
3.110 €/DN
3.110 €/DN
3.110 €/DN
3.110 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
32
code
price €
code
price €
code
price €
code
price €
Strainer baskets
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
392003
1,63 392004
1,73 392005
1,93 392006
2,13 392007
2,80 392008
3,17 392009
4,67 392010
9,83 392011
12,07 392012
15,90
392 - Plastic threaded end - Stainless steel mesh
Ø 3/8" 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4"
391003
16,83 391004
17,77 391005
21,00 391006
24,97 391007
26,80 391008
32,67 391009
48,80 391010
106,67 391011
110,03 391012
118,63
391 - Full stainless steel 316
DN 50 65 80 100 125 150 200 250
367050
78,22 367065
97,82 367080
114,24 367100
134,64 367125
154,44 367150
180,18 367200
193,60 367250
330,66
367 - Flanged PN16 - Galvanized carbon steel
DN 50 65 80 100 125 150 200 200/16 250 250/16 300/10
376050
161,38 376065
185,08 376080
192,90 376100
270,66 376125
324,48 376150
403,32 376200
618,50 376201
560,00 376250
951,28 376251
960,00 376300
1 173,34
376 - Flanged PN10/16 - Stainless steel 304
1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,5 1,5 2,0Mesh (mm)
1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,5 1,5 2,0Mesh (mm)
Expansion joints
code
price €
code
price €
code
price €
Metal
Ø 1/2" 3/4" 1" 1"1/4 1"1/2 2"
1551004
44,85 1551005
47,72 1551006
59,74 1551007
72,43 1551008
87,49 1551009
95,45
255 240 265 300 300 300Length
1551 - Threaded - With external & internal linerPN16 - Aluminium external liner - Steel internal liner - Stainless steel 316 bellow - Max. temperature 250°C - Max. pressure 16 bar (at 20°C).
DN 25 32 40 50 65 80 100 125 150 200 250
1511025
87,66 1511032
94,77 1511040
98,15 1511050
102,55 1511065
149,94 1511080
168,22 1511100
193,94 1511125
226,90 1511150
270,80 1511200
336,77 1511250
395,32
185 185 200 270 260 275 310 310 350 330 360Length
1511 - Butt welding - With stainless steel 321 internal liner & belowStainless steel 321 bellow - Steel butt welding connection - Max. pressure 16 bar (at 20°C) - Max. temperature 300°C (at 10 bar).
DN 25 32 40 50 65 80 100 125 150 200 250
1521025
117,11 1521032
131,32 1521040
142,32 1521050
168,22 1521065
189,54 1521080
216,62 1521100
253,85 1521125
303,09 1521150
364,18 1521200
463,52 1521250
585,54
105 105 120 150 140 155 220 190 270 275 285Length
1521 - Flanged PN16 - With stainless steel 321 internal liner Stainless steel 321 bellow - Steel flanges - Max. pressure 16 bar (at 20°C) - Max. temperature 300°C (at 10 bar).
97/23/CE directive N° 0036 - Risk category II.
Check valves (continued)
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
33
code
price €
Rubber
Rubber-metal pipe connector
Ø 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"
1504004
15,00 1504005
15,00 1504006
16,20 1504007
19,86 1504008
23,39 1504009
29,51 1504010
44,24 1504011
57,37
200 200 200 200 200 200 240 240Length (mm)
1504 - EPDM double wave Zinc plated cast iron union fittings.
Threaded
DN 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
1501032
22,52 1501040
25,94 1501050
30,18 1501065
38,07 1501080
43,43 1501100
53,22 1501125
74,95 1501150
90,60 1501200
142,03 1501250
209,64 1501300
245,55 1501350
404,23 1501400
499,41 1501450
575,07 1501500
746,28 1501600
1 074,48
95 95 105 115 130 135 170 180 205 240 260 265 265 265 265 265Length (mm)
1501 - EPDM - Flanged PN10Cadmium steel flanges.
DN 200 250 300
1502200
151,04 1502250
216,54 1502300
265,00
205 240 260Length (mm)
1502 - EPDM - Flanged PN16Cadmium steel flanges.
DN 32 40 50 65 80 100 125 150 200
1503032
24,10 1503040
27,75 1503050
32,28 1503065
40,74 1503080
46,47 1503100
56,94 1503125
80,18 1503150
96,94 1503200
152,01
95 95 105 115 130 135 170 180 205Length (mm)
1503 - NBR - Flanged PN10Cadmium steel flanges.
DN 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
9860407
44,00 9860408
44,00 9860409
56,60 9860410
60,46 9860411
60,46 9860412
60,46 9860413
64,32 9860414
81,04 9860415
88,76 9860416
96,50 9860417
97,78 9860418
118,00 9860419
124,00 9860420
136,00 9860421
148,00 9860422
188,00
98604 - Expansion limiter with screws set - Flanged PN10For 1501 & 1503 - Supplied without expansion joint & flange.
DN 200 250 300
9860315
88,76 9860316
99,06 9860317
108,08
Flanged
Excluded from 97/23/CE directive (article 1, § 3.2) - Max. pressure (at 20°C) 10 bar up to DN250, 7 bar above -Max. temperature 100°C for 1501-1502-1504, 80°C for 1503.
Flanges, see page 37
code
price €
code
price €
code
price €
DN 32 40 50 65 80 100 125 150 200
1509032
92,82 1509040
92,82 1509050
92,82 1509065
103,50 1509080
124,00 1509100
152,23 1509125
173,10 1509150
226,43 1509200
280,90
71 71 71 71 71 71 71 71 71Length (mm)
1509 - EPDM - Flanged PN10Max. pressure 10 bar - Temperature range: -10°C/+100°C - Supplied with screws & bolts.
code
price €
code
price €
code
price €
98603 - Expansion limiter with screws set - Flanged PN16For 1502 - Supplied without expansion joint & flange.
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
10 10 10 10 10 10 10 8 6 4 4Max. pressure (bar)
34
Knife gate valves
For fluids concerned by risk category III, H module of 97/23/CE directive N° 0062 - Uni-directional tightness: sense of mounting - Rising rotating stem, non rising hand wheel - Rilsan painted - Flanged PN10 - NFE 29311 - DIN 3230 - ISO 5208.
Same as above, except: bi-directional tightness; non rising stem & handwheel.
170 code
176 code
price €
DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700
10 10 10 10 10 10 10 8 6 4 4 3 3 3 2Max. pressure (bar)
170050
176050
166,69
170065
176065
179,31
170080
176080
186,56
170100
176100
206,66
170125
176125
249,93
170150
176150
284,02
170200
176200
472,97
170250
176250
604,84
170300
176300
803,20
170350
-
1 369,11
170400
-
1 719,86
170450
-
2 229,83
170500
-
2 491,39
170600
-
3 988,84
170700
-
7 266,90
170 - Cast iron - NBR gasketGG25 body - Stainless steel 304 gate - Max. temperature 80°C.176 - Cast iron - Metal seatGG25 body - Stainless steel 304 gate - Max. temperature 100°C.
Limit switches
code
price €
DN 50 65 80 100 125 150 200 250 300 350 400
172050
302,25 172065
368,97 172080
394,25 172100
454,04 172125
542,54 172150
662,38 172200
1 030,56 172250
1 576,17 172300
2 475,27 172350
4 250,40 172400
5 103,32
172 - Stainless steel - EPDM gasketCF8M-1.4408 body - Stainless steel 316 gate - Max. temperature 100°C.
10 10 10 10 10 10 10 8 6Max. pressure (bar)
code
price €
DN 50 65 80 100 125 150 200 250 300
178050
188,69 178065
203,00 178080
211,19 178100
233,96 178125
282,92 178150
321,51 178200
535,42 178250
684,68 178300
909,23
178 - Cast iron - NBR gasketGG25 body - Stainless steel 304 gate - Max. temperature 80°C.
code
price €
DN 50 65 80 100 125 150 200 250 300
9801780
116,88 9801781
118,20 9801782
120,32 9801783
124,16 9801784
136,60 9801785
135,96 9801786
236,08 9801787
234,44 9801788
245,60
Lever set
Manually operated
code
price €code
price €code
price €code
price €code
price €
DN 50 65 80 100 125 150 200 250 300 350 400 985670
72,80 985671
88,20 985672
128,60 985673
163,00 985674
180,60 985675
249,68 985676
355,50 985677
451,54 985678
538,98 985679
991,52 985680
1 166,86
Deflector
985500
42,00 985501
44,00 985502
46,00 985503
50,00 985504
54,00 985505
60,00 985506
68,00 985507
76,00 985508
88,00 985509
150,00 985510
150,00
NBR seat
985520
42,00 985521
44,00 985522
46,00 985523
50,00 985524
54,00 985525
60,00 985526
68,00 985527
76,00 985528
88,00 985529
150,00 985530
150,00
EPDM seat
985540
74,00 985541
84,00 985542
102,00 985543
112,00 985544
130,00 985545
138,00 985546
138,00 985547
184,00 985548
230,00 985549
380,00 985550
470,00
*PTFE seat
985560
74,00 985561
84,00 985562
102,00 985563
112,00 985564
130,00 985565
138,00 985566
138,00 985567
184,00 985568
230,00 985569
380,00 985570
470,00
FKM seat
code price €
9801350 84,50 9801351 147,20 9801352 154,60
Options
Bi-directional tightness
Uni-directional tightness
1 limit switch (all diameters) Set of 2 limit switches for DN50 to 150
DN200 to 300
*Uncomplete tightness - Leakage rate class III.
Please consult for availability
3.1
10 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
35
CE 97/23 category I - Free rising rotating stem - ISO 5211 pad (only for electric actuator) - Free for actuator - Uni-directionaltightness: sense of mounting - Rilsan painted - Flanged PN10 - NFE 29311 - DIN 3230 - ISO 5208.
CE 97/23 category I - Uni-directional tightness: sense of mounting - Electric actuator REGADA 230V - IP67 - Temperaturerange: -25°C / +55°C - Safety manual gear - Heating resistance 20W - S4 duty service - 25% - 10 cycles/hour - Torque limi-ter - Painted steel side covers - Electric connection M20 x 1,5 (SO2) & M25 x 1,5 (MO3) to be added.
170 - Cast iron - NBR gasketGG25 body - Stainless steel 304 gate - Max. temperature 80°C.176 - Cast iron - Metal seatGG25 body - Stainless steel 304 gate - Max. temperature 100°C.
10 10 10 10 10 10 10 8 6 4 4Max. pressure (bar)
170 ISO code
176 ISO code
price €
DN 50 65 80 100 125 150 200 250* 300* 350* 400*
440004ISO
446004ISO
197,30
440005ISO
446005ISO
211,80
440006ISO
446006ISO
217,47
440007ISO
446007ISO
268,00
440008ISO
446008ISO
297,97
440009ISO
446009ISO
347,10
440010ISO
446010ISO
572,00
440011ISO
446011ISO
728,00
440012ISO
446012ISO
996,00
440013ISO
446013ISO
1 706,57
440014ISO
446014ISO
2 288,50
ISO pad connected
Electric actuated
170 - Cast iron - NBR gasketGG25 body - Stainless steel 304 gate - Max. temperature 80°C.176 - Cast iron - Metal seatGG25 body - Stainless steel 304 gate - Max. temperature 100°C.
172 - Stainless steel - EPDM gasketCF8M-1.4408 body - Stainless steel 316 gate - Max. temperature 100°C.
176 codeDN
446004027100 2 624,00 446005027100 2 638,00 446006027100 2 642,00 446007027100 2 670,00 446008027100 2 716,00 446009027100 2 762,00 446010027150 3 986,00 446011027150 4 128,00 446012027150 4 354,00
50 6580
100*125*150*200*250*300*
price €
F10 F10 F10 F10 F10 F10 F10 F10 F10 F10 F10ISO
20 x 4 20 x 4 20 x 4 20 x 4 20 x 4 25 x 5 25 x 5 25 x 5 25 x 5 35 x 6 35 x 6Stem (diam x pitch)
13 16 20 25 31 38 40 50 60 58 67Nbr. of turns
20 22 25 30 35 40 46 52 60 80 110Torque (Nm)
172 - Stainless steel - EPDM gasketCF8M-1.4408 body - Stainless steel 316 gate - Max. temperature 100°C.
10 10 10 10 10 10 10 8 6 4 4Max. pressure (bar)
code
price €
DN 50 65 80 100 125 150 200 250* 300* 350* 400*
445004ISO
330,63 445005ISO
394,00 445006ISO
447,30 445007ISO
518,80 445008ISO
590,60 445009ISO
796,73 445010ISO
1 202,47 445011ISO
1 740,00 445012ISO
2 783,73 445013ISO
4 535,07 445014ISO
5 608,77
F10 F10 F10 F10 F10 F10 F10 F10 F10 F10 F10ISO
20 x 4 20 x 4 20 x 4 20 x 4 20 x 4 25 x 5 25 x 5 25 x 5 25 x 5 35 x 6 35 x 6Stem (diam x pitch)
13 16 20 25 31 38 40 50 60 58 67Nbr. of turns
20 22 25 30 35 40 46 52 60 80 110Torque (Nm)
Actuator
SO2SO2SO2SO2SO2SO2MO3MO3MO3
170 Code
440004027100440005027100440006027100440007027100440008027100440009027100440010027150440011027150440012027150
Operatingtime (s)
3948607593114607590
codeDN
445004027100 2 748,00 445005027100 2 806,00 445006027100 2 854,00 445007027100 2 920,00 445008027100 2 988,00 445009027100 3 178,00 445010027150 4 574,00 445011027150 5 068,00 445012027150 6 032,00
50 6580
100*125*150*200*250*300*
price €Actuator
SO2SO2SO2SO2SO2SO2MO3MO3MO3
Operatingtime (s)
3948607593114607590
* 40 € to be added for special packaging.
* 40 € to be added for special packaging.
* 40 € to be added for special packaging.
* 40 € to be added for special packaging.
3.1
10 €/DN
3.1
10 €/DN
Electric actuated with AUMA on request
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
170 codeDN price €
440004035010440005035011440006035012440007035013440008035014440009035015440010035016440011035017440012035018440013035019440014035020
176 code
446004035010 212,00 446005035011 226,00 446006035012 242,00 446007035013 288,00 446008035014 402,00 446009035015 442,00 446010035016 784,00 446011035017 1 080,00 446012035018 1 284,00 446013035019 2 360,00 446014035020 2 694,00
50 6580
100 125150200250300350400
* 40 € to be added for special packaging.
**
**
code price €
042600 640,00 042601 740,00 042602 760,00
Single effect sets
Normally closed with air tank DN50 to 200Normally closed with air tank DN250 & 300Normally open with air tank DN350 & 40036
Ø
1/8"1/4"
Limit switchesSet of 2 limit switches for pneumatic actuated valves DN50 to 150
DN200 to 300
code price €
042450N 164,00 042452N 164,00 042452N 164,00 042453N 164,00 042454N 164,00 042455N 164,00
Voltage
230V AC24V AC48V AC110V AC12V DC24V DC
Solenoid valve 5/2 monostable - IP65 Lucifer 341 PO1 - DN50 to 200Connection 1/4" inlet and 1/8" outlet - Tubing to actuator included.
code price €
042460N 276,00 042461N 276,00 042462N 276,00 042463N 276,00 042464N 276,00 042465N 276,00
Voltage
230V AC24V AC48V AC110V AC12V DC24V DC
Solenoid valve 5/2 monostable - IP65 Lucifer 341 PO2 - DN250 to 300Connection 1/4" inlet and 1/8" outlet - Tubing to actuator included.
code price €
041312 162,00 041314 162,00
Position detectors code price €
121147N 96,00 121150N 96,00 122141N 96,00 122143N 96,00
Filters - Regulators - Lubrificators
Filter regulator 1/4" DN50 to 200Filter regulator 3/8" DN250 to 400
code price €
172002 39,80 172003 39,80
Break
code price €
041196 5,80 041195 5,80
Ø
1/8"1/4"
Silencer
code price €
041192 1,76 041193 2,60
Filter regulator + lubrificator 1/4" DN50 to 200Filter regulator + lubrificator 3/8" DN250 to 400
170002 54,00 170003 54,00
Accessories
Inductive detector IFM Ø12 10-36V DC PNP NO 3 threads with M12 connector DN50 to 150DN200 to 300
Inductive detector P+F Ø12 10-36V DC PNP NO 3 threads with 2 m wire DN50 to 150DN200 to 300
Knife gate valves (continued)
Pneumatic actuated
170 - Cast iron - NBR gasketGG25 body - Stainless steel 304 gate - Max. temperature 80°C.176 - Cast iron - Metal seatGG25 body - Stainless steel 304 gate - Max. temperature 100°C. codeDN price €
445004035010 350,00 445005035011 446,00 445006035012 450,00 445007035013 546,00 445008035014 730,00 445009035015 914,00 445010035016 1 490,00 445011035017 2 376,00 445012035018 3 020,00 445013035019 4 580,00 445014035020 4 720,00
50 6580
100 125150200250300350400
172 - Stainless steel - EPDM gasketCF8M-1.4408 body - Stainless steel 316 gate - Max. temperature 100°C.
Double acting pneumatic actuator - Painted steel side covers - Actuator designed for lubrificated air input 6 bar.
**
**
* 40 € to be added for special packaging.
3.1
10 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
37
2109 - Single flange PN16
DN 15 20 25 32 40 50 65 80 100 125 150 200/10
4 4 4 4 4 4 4 8 8 8 8 8holes
2100015
4,94 2100020
6,57 2100025
8,71 2100032
12,29 2100040
17,20 2100050
15,69 2100065
19,06 2100080
22,06 2100100
25,77 2100125
42,46 2100150
45,20 2101200
67,00 code
price €
DN 15 20 25 32 40 50 65 80 100 125 150 200
4 4 4 4 4 4 4 8 8 8 8 12holes
2109015
28,83 2109020
31,40 2109025
53,43 2109032
64,86 2109040
84,86 2109050
75,40 2109065
106,91 2109080
172,46 2109100
154,66 2109125
122,66 2109150
266,40 2109200
256,31
DN 200/16 250/10 250/16 300/10 300/16
12 12 12 12 12holes
2100200
76,23 2101250
99,00 2100250
124,37 2101300
122,17 2100300
182,60
2100 - Single flange PN162101 - Single flange PN10
Butt welding carbon steel flanges
Flat 316L stainless steel flanges
Flanges
98021 - Universal gasketFor water, oil, steam, gas - 150°C - 40 bar.
DN 15 20 25 32 40 50 65 80 100 125 150 200
9802104
0,96 9802105
1,10 9802106
1,40 9802107
1,66 9802108
1,96 9802109
2,56 9802110
3,30 9802111
3,86 9802112
4,66 9802113
6,06 9802114
7,30 9802115
11,26
DN 250 300
9802116
15,40 9802117
20,10
Flange gaskets
2103 - Bolts set for flanged PN16 valves
DN 15 20 25 32 40 50 65 80 100 125 150 200
2103015
7,04 2103020
7,04 2103025
9,68 2103032
9,68 2103040
9,68 2103050
9,68 2103065
10,12 2103080
20,24 2103100
20,24 2103125
25,52 2103150
59,84 2103200
88,18
Bolts sets
2110 - Bolts set for wafer butterfly valves
DN 50 65 80 100 125 150 200 250 300
2110050
8,14 2110065
8,58 2110080
17,16 2110100
19,36 2110125
38,28 2110150
42,68 2110200
42,68 2110250
130,02 2110300
130,02
2111 - Bolts set for lug butterfly valves
DN 40 50 65 80 100 125 150 200 250 300
2111040
7,04 2111050
6,16 2111065
6,16 2111080
11,44 2111100
11,44 2111125
14,96 2111150
38,72 2111200
38,72 2111250
85,80 2111300
99,00
code
price €
code
price €
code
price €
code
price €
code
price €
code
price €
code
price €
Connections
3.1
10 €/DN
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
38
Connections (continued)
Ext. pipe Ø 21/25 26/30 29/33 33/37 38/42 42/45 48/51 50/54 55/60 60/64 65/69 69/73 71/76 1401021
7,44 1401026
7,46 1401029
7,62 1401033
7,64 1401038
7,98 1401042
7,98 1401048
8,32 1401050
8,42 1401055
9,02 1401060
11,10 1401065
11,02 1401069
11,20 1401071
11,28 code
price €
code
price €
code
price €
code
price €
Ext. pipe Ø 76/82 82/87 87/93 94/100 99/104 105/111 112/118 120/126 126/131 131/136 139/145 156/162 167/173 1401076
11,98 1401082
11,98 1401087
11,98 1401094
12,42 1401099
12,60 1401105
12,98 1401112
13,70 1401120
23,10 1401126
22,44 1401131
22,78 1401139
24,06 1401156
25,20 1401167
25,50
1401 - M Type - 1 bolt - Length 80 mm
Ext. pipe Ø 48/56 56/64 60/68 68/78 78/88 88/98 98/108 108/118 114/126 126/138 138/150 140/153 1403048
79,04 1403056
79,80 1403060
81,22 1403068
82,24 1403078
82,02 1403088
86,08 1403098
88,84 1403108
92,24 1403114
94,02 1403126
96,12 1403138
98,78 1403140
100,90
Ext. pipe Ø 150/162 162/174 168/182 174/186 186/198 198/210 210/223 222/234 234/246 243/255 273/285 1403150
104,12 1403162
105,74 1403168
109,56 1403174
112,80 1403186
112,62 1403198
117,62 1403210
123,88 1403222
127,64 1403234
137,28 1403243
148,32 1403273
166,50
1403 - B Type - 3 bolts - Length 200 mm
Repairing
Repairing for complete break
Repair clamps
Tapping bridges
Excluded from 97/23/CE directive (article 1, § 3-1) -Stainless steel band - Ductile iron clamp - EPDMrubber gasket - Max. temperature: 60°C.
DN 20-140 200 250 300 400 500
20 16 10 8 4,5 2,5Max. pressure (bar)
Ext. pipe Ø 88/110 114/137 138/160 160/182 182/202 202/224 217/240 240/262 262/284 273/296 296/319 324/346 1406088
159,20 1406114
160,44 1406138
167,34 1406160
160,54 1406182
170,00 1406202
172,14 1406217
179,86 1406240
185,10 1406262
199,76 1406273
174,08 1406296
204,00 1406324
215,98
Ext. pipe Ø 346/368 365/387 387/410 410/432 428/450 450/474 470/492 492/516 1406346
230,20 1406365
200,02 1406387
245,34 1406410
265,44 1406428
240,02 1406450
268,42 1406470
268,96 1406492
311,98
1406 - D Type (2 pieces) - 3 bolts x 2 - Length 200 mm
code
price €
code
price €
Ext. pipe Ø 25 25 32 32 40 40 40 50 50 50 63 63 63 63 63
1189254
1,62 1189255
1,62 1189324
1,62 1189325
1,62 1189414
1,62 1189415
1,62 1189416
1,62 1189514
1,68 1189515
1,92 1189516
2,06 1189634
2,20 1189635
2,20 1189636
2,84 1189637
3,00 1189638
3,20
1189 - Tapping bridge for polyethylene and PVC pipes Polypropylene body - Max. pressure 10 bar - Max. temperature 45°C.
1190 - Tapping bridge for multi-pipes Cast iron body - NBR glued gasket - Stainless steel 304 bridge and screws - For polyethylene, PVC, carbon steel and cast iron pipes -Max. pressure 10 bar - Max. temperature 60°C.
code
price €
Use: water works - Excluded from 97/23/CE directive (article 1, § 3-2).
1/2" 3/4" 1/2" 3/4" 1/2" 3/4" 1" 1/2" 3/4" 1" 1/2" 3/4" 1" 1"1/4 1"1/2Thread
10/170 10/170 10/170 10/170 5/140 5/140 5/140 5/130 5/130 5/130 5/120 5/120 5/120 5/120 5/120pack
40-50
48-55
60-68
72-80
76-84
88-104
98-112
112-126
140-154
168-184
1190038 20,02
1190039 20,02
1190048 22,08
1190060 23,68
1190070 30,44
1190076 30,78
1190089 34,00
1190100 33,08
1190114 32,98
1190140 32,54
1190168 33,40
1190049 22,08
1190061 23,68
1190071 30,50
1190077 30,84
1190090 34,00
1190101 33,08
1190115 33,08
1190141 33,08
1190169 33,52
1190062 32,00
1190072 33,22
1190078 34,00
1190091 37,46
1190102 36,44
1190116 36,72
1190142 38,00
1190170 38,14
1190063 31,08
1190073 33,22
1190079 33,70
1190092 34,98
1190103 36,68
1190117 36,72
1190143 38,24
1190171 39,28
1190093 39,46
1190118 39,10
1190144 42,90
1190172 41,16
1190173 49,02
1190174 62,00
30
40
50
65
70
80
90
100
125
150
DN Ø ext. 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3"Threaded outlet
Drinking water
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
• Pneumatic actuators --------------------------------------------------------------------------------------------------- page 40• Accessories for pneumatic actuators ------------------------------ pages 40 to 42• Pneumatic actuated valves --------------------------------------------------------- pages 43 to 52• Electric actuators --------------------------------------------------------------------------------------- pages 53 to 55
• Electric actuated valves ------------------------------------------------------------------- pages 56 to 64• Solenoid valves ------------------------------------------------------------------------------------------- pages 65 to 66• On/off pneumatic actuated valves -------------------------------------------------------- page 67• Control valves -------------------------------------------------------------------------------------------------------------------- page 68
Actuated valves
• Ecop range ---------------------------------------------------------------------------------------------------------- pages 98 to 99• Spid’O range ---------------------------------------------------------------------------------------------- pages 99 to 105• Surface pumps -------------------------------------------------------------------------------------- pages 106 to 110• Pressurisation sets ------------------------------------------------------------------------ pages 111 to 112• Submersible pumps ------------------------------------------------------------------------ pages 113 to 123• Swimming pool pumps -------------------------------------------------------------- pages 124 to 125• Transfer pumps ----------------------------------------------------------------------------------- pages 126 to 127
• Control panels --------------------------------------------------------------------------------------- pages 128 to 129• Pressurised water tanks ------------------------------------------------------- pages 130 to 131• Automatic devices for domestic pumps -------------- pages 132 to 133• Level control ---------------------------------------------------------------------------------------------------------------------- page 134• Pumps accessories ---------------------------------------------------------------------------------------------------- page 135• Manometers ---------------------------------------------------------------------------------------------------------------------- page 136
Pumps & garden
• Safety valves ----------------------------------------------------------------------------------------------- pages 70 to 71• Overflow valves----------------------------------------------------------------------------------------- pages 71 to 72• Pressure reducing valves ---------------------------------------------------------------- pages 72 to 73• Gas equipment --------------------------------------------------------------------------------------------- pages 74 to 75
• Steam equipment ------------------------------------------------------------------------------------- pages 76 to 79• Compressed air equipment ---------------------------------------------------------- pages 80 to 81• Instrumentation ------------------------------------------------------------------------------------------ pages 82 to 86• Fittings and couplings ------------------------------------------------------------------------- pages 87 to 96
Industry
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89
• Fittings ----------------------------------------------------------------------------------------------------------- pages 138 to 158• Distribution manifolds --------------------------------------------------------------- pages 159 to 161• Galvanized carbon steel system - Serti-Steel --------- pages 162 to 165
• Multilayer pipes systems ------------------------------------------------------ pages 166 to 171• Flexible hoses & stainless steel flexible pipes -------- pages 172 to 178
Connections
• Ball valves ------------------------------------------------------------------------------------------------ pages 180 to 183• Gate valves ------------------------------------------------------------------------------------------------------------------------ page 184• Globe valve ------------------------------------------------------------------------------------------------------------------------ page 184• Manual control valve -------------------------------------------------------------------------------------------- page 184• Bibcock valves ---------------------------------------------------------------------------------------------------------------- page 185
• Shut-off valves ------------------------------------------------------------------------------------------------------------- page 186• Y-strainers --------------------------------------------------------------------------------------------------------------------------- page 186• Check valves --------------------------------------------------------------------------------------------------------------------- page 187• PVC valves ------------------------------------------------------------------------------------------------------------------------- page 188
Valves for building
• Water heater safety ---------------------------------------------------------------------------------------------- page 214• Thermostatic mixing valves ------------------------------------------------------------------------- page 215• Pressure reducing valves -------------------------------------------------------------------------------- page 216• Hammer arresters ----------------------------------------------------------------------------------------------------- page 216
• Water meters ------------------------------------------------------------------------------------------------------------------ page 217• Washing machine & toilet supplies ------------------------- pages 218 to 219• Water filtration ---------------------------------------------------------------------------------- pages 220 to 225
Plumbing
[email protected] Tel. +31-15-261.09.00Fax. +31-15-261.62.89