8/18/2019 Lee Valley Tools Hardware Drilling Jig Instr

http://slidepdf.com/reader/full/lee-valley-tools-hardware-drilling-jig-instr 1/2

Hardware Drilling Jig

View as PDF (73 KB)

(25K59.00+)

 The following instructions were provided by the manufacturer.

 

This Austrian-made jig makes quick work of drilling holes for handles and knobs. Ideal

for production work, it is adjustable vertically and horizontally. Graduated double

guide rods center holes up to 245mm (9-3/4") from any edge. With the exception of 

situations requiring the extension rods (which are not graduated), drilling may be done

without any measurement. It works for both left- and right-hinged doors.

The metric drilling bar is graduated for hardware mounted on 32mm centers (from

32mm up to 320mm) and the Imperial bar has holes for pieces on 1/2" centers (from

2-1/2" to 12"). The jig can be used with the drilling bar oriented either horizontally or vertically. A cursor on the jig body locates the center axis for knobs or the midpoint of 

equidistant holes for handles.

 

 A movable stop on the graduated drilling bar provides positioning up to 315mm (12-

3/8") from the top or bottom of the door (or end of the drawer front).

 

8/18/2019 Lee Valley Tools Hardware Drilling Jig Instr

http://slidepdf.com/reader/full/lee-valley-tools-hardware-drilling-jig-instr 2/2

 

Extension rods increase the end

stop's capacity to 1230mm (48-1/2").

  Ball detents in the fence allow the drilling

bar to pivot for placing holes at 15°, 30°

and 45° to the reference surface.

 

©Copyright 1998 to 2016 by Lee Valley Tools Ltd. and Veritas® Tools Inc. All rights reserved.